SMTP Adapter

Hello,
I am trying to use SMTP Adapter to send e-mail notification with original FILE NAME in Subject line or Text Body of the e-mail. How can i achieve this without using orchestration

Boatseller is right!
you should using an Orchestration to do it is easier,
If you do not want using Orchestration please refer to
http://blogs.msdn.com/b/nabeelp/archive/2008/09/11/sending-an-html-email-without-an-orchestration.aspx
If would you like try to use SMTP Adapter to send e-mail without deploy biztalk project form visual studio (only simple scenarios and not flexible ^^) use can create static send port in Biztalk Server Administration with SMTP Adapter and then configuration
SMTP server, user, password, subject, text body...
Regards,

Similar Messages

Sending an email with text Content using SMTP Adapter.

I am trying to send an email Message with the .txt attachment using SMTP adapter. I am getting an XML input and I am mapping the input Schema to Flat File Schema. I am trying to Send this Flat File(.txt attachment) in the Email. But I am receiving it as
HTML format only.
The Expression in the Message Transform is,
     SMTPUtils.Part.SetContentType(OutgoingFlatFile_Msg.BodyFlatFile,"text");
     OutgoingFlatFile_Msg(SMTP.EmailBodyTextCharset)="UTF-8";
     DynamicEmailPort(Microsoft.XLANGs.BaseTypes.Address) = "mailto:[email protected]";
     OutgoingFlatFile_Msg(SMTP.CC) = "[email protected]";
     OutgoingFlatFile_Msg(SMTP.Subject) = "TESTMAIL";
     OutgoingFlatFile_Msg(SMTP.From) = "[email protected]";
     OutgoingFlatFile_Msg(SMTP.SMTPHost) = "smtp.org";
     OutgoingFlatFile_Msg(SMTP.SMTPAuthenticate) = 0;
The Email attachment is HTML format,
<?xml version="1.0" encoding="utf-8"?><ns0:Root xmlns:ns0="http://SampleSMTPEmail.OutgoingFlatFile"><Record><CustomerID>Cus001</CustomerID><OrderID>Ord001</OrderID></Record></ns0:Root>
How to attach the .txt file to the email.

Have you tried the following steps:
Create the message (“msgEnvelope”) as a Multi-Part message, with the required message in the Message Body Part (“Attachment”)
Set the following properties of the Envelope Message:
msgEnvelope(SMTP.Subject) = <Email Subject>;
msgEnvelope(SMTP.From) = <Sender Email>;
msgEnvelope(SMTP.SMTPHost) = <Email Host name>";
// This is the default value
msgEnvelope(SMTP.SMTPAuthenticate) = 0;
// Set the message text included in the email
msgEnvelope(SMTP.EmailBodyText) = <Text in body of email>;
// Important - This is required if the EmailBodyText is set
msgEnvelope(SMTP.EmailBodyTextCharset) = "utf-8";
// A value of '1' means include Message Body Part as email attachment
msgEnvelope(SMTP.MessagePartsAttachments) = 1;
Set the following properties of the Message Body Part (“Attachment”):
// Important - Change this MIME type if not sending a Text file
msgEnvelope.Attachment(Microsoft.XLANGs.BaseTypes.ContentType) = "text/plain";
// Set the Filename of the attachment
msgEnvelope.Attachment(MIME.FileName) = <Physical name of the attachment>;
Set the following property on the Dynamic Send Port:
// We set the Email Address on the Port itself
Dynamic_Send_Port(Microsoft.XLANGs.BaseTypes.Address) = <recipient email address>;
http://biztalktalk.wordpress.com/2008/08/28/sending-attachments-through-a-dynamic-send-port/
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Attachment File non-English Name DISAPPEARS problem in BizTalk 2010 SMTP Adapter

Hello ,
I'm using BizTalk 2010 SMTP Adapter for sending mail with attachments by setting them via property SMTP.Attachments
//Attachment
msgEmail(SMTP.Attachments)= AttachmentList;
I have files in several languages (In English and in Russian partialy) for the example
My attachment list looks like this:
"C:\Temp\Files\EnglishNameFile.xml | C:\Temp\Files\RussianFileName_РусскоеИмя.xml";
After the sending Mail with this attachments the second file (it's name partialy in Russian) received without this part name
(The non-english part of name is DISAPPEARS)
like this:
RussianFileName_.xml ( must be RussianFileName_РусскоеИмя.xml)
The NON-English part is DISAPPEARS!!!
And if i have file that doesn't have latin latters (non-english) at all than BizTalk SMTP Adapter change name
to default one like ATT41233.xml
I found this behaviour occur in other non-english languages also!!!
Unfortunately i'm not found any info about this
Any help would be very
much appreciated
Vadim

Refer to this link -
http://social.msdn.microsoft.com/Forums/en-US/163a47cf-db31-49a5-9ee3-ce9272ba24ff/setting-contenttransferencoding-in-dynamic-smtp-port?forum=biztalkgeneral
There is an option of the Multipart message that controls the filename and the charset used to control how the attachment is treated, including content-transfer encoding.
Regards.

SMTP Adapter work unexpectedly

Hi
I am using SMTP adapter for sending E-Mail .
recently i noticed that , if i disable SMTP Port then it should not send Email and Message should be suspended on Admin console.
as per my knowledge if i resume the instance of message mannually then it should not send Email because port is stopped .
But when i resume the message , it is sending Email .
Please help me i am facing it in production .
Regards
Mohit Gupta

Hi Mohit,
This seems to be the standard behaviour of the send ports, not just SMTP.
This has been discussed in the past here:
Resuming with Stopped Send Ports and Orchestrations
When's a 'Stopped Send Port' NOT a 'Stopped Send Port' - As per this blog post in 2007, Microsoft had looked in to changing the term
"Stop", "Resume" to "resume for debug". but this not been implemented for some reason. I agree, the terms are misguiding - "Stop" and "Resume". We should have something like "Resume for Debug" to send the message through even when the send port is disabled,
other if the user click just "Resume", message should not pass through when the port is in stopped state.
Good learning, which I never realised till today :)
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Send Error Type or Description of failed messgaes in body of mail using SMTP adapter

Hi,
I want to send failed messages error type or description to admin to notify him for error occurs in BizTalk, with Error description in body part.
I have set Send port option for "Enable routing of failed messages" and created a send port having SMTP adapter. Now in body I want to send error description.
Pls advise how can I achieve this.
-- Kind Regards Sandeep

When failed message routing is enabled, BizTalk Server does not suspend the message—it routes the message instead.
When a failed message is generated, BizTalk Server promotes error-report-related message context properties and demotes regular message context properties before publishing the failed message. Compare this to the default behavior when
failed message routing is not enabled: Messages that fail are suspended. --------
MSDN
So if i were in this situation i would prefer to route the failed message to SMTP as well as to some kind of transport from which i can again receive the message ( like MSMQ or File).
I mean create a send port group and bind 2 send port to this group (SMTP and MSMQ) and bind this group to that orchestration (specified in previous post) which subscribe the Failed Messages. Then bind the MSMQ location to your receive
location to retry.
I am not sure wheather it is the optimal solution or not ..... but it will work. Kindly let me know if you are not clear with what i said.
Regards

BizTalk routing using SMTP Adapter

Hello, I have I an Orchestration , depending on STATUS field in Orch how can I send an email using SMTP Adapter ?
For eg : if STATUS = OK, send email saying file is OK
if STATUS = Error, send email saying file is Error
if STATUS= Pending, send email saying file is Pending
if Status =Paid, send email saying file is Paid
How can this be achieved using dynamic send Port ?
MBH

Hi,
Yes, you can achieve this using dynamic send ports.
In decide shape you can check the Status (It can be distinguished field or based on XPATH).
Dynamic Send Port where you set the appropriate email address on the message.
Read
this thread also about sending email dynamically.
You can also refer some good discussion
here.
Please mark as answer or vote as helpful if my reply does

Any success stories for the SMTP-adapter?

Hello,
I'm wondering if someone was able to set up the SMTP adapter for XI 2.0. The documentation points to a "Adapter Engine.zip" for a demo implementation but I couldn't find it. It would be great if someone could submit a working properties file for this adapter.
Best regards and thank you in Advance
Mario Müller

If you have New Every Two, deduct $100 credit + $70 rebate, you still pay $99 + sales tax on the Full price for the Tour + sign 2 years contract. Sell your Storm on Ebay, I have seen they selling from $220 to $260+ (good listing, no scratch on phone). 6 months ago you paid around $100?. Anyway, I have 3 months old Samsung Glyde that has too much problems (bad designed), I talked to Verizon customer support, within the warranty period they will replace 3 times and if still problem, they will let you choose another brand or model. Let me know if they accept the trade-in.

SMTP adapter does not parse my XML

I am learning how to work with interconnect and I am trying to get the SMTP adapter to scan my emails and use an ftp adapter to create files on my filesystem when an email arrives. Seems pretty simple to me but I cannot get it to work, because the documentation on the SMTP adapter is not really helping me.
I assume that the adapter scans the body of the email, and in the body is XML with one tag. I created a published event for the adapter in which I specify the structure of the XML but it keeps on complaining that there is no suitable published event for the email it finds.
The error is this;
<SUPPL_DETAIL><![CDATA[oracle.oai.agent.common.AgentRuntimeException: There is no OAI publish or invoke message associated with this XML message: subject. Please check to make sure that youve imported the DTD/XSD for this XML in iStudio and that youve created a publish or invoke message for this XML. Also, make sure that this XML satisfies the conditions which you have specified in iStudio for associating this XML with the publish or invoke message.
     at oracle.oai.agent.client.XMLToAOConverter.getMessageInfo(XMLToAOConverter.java:351)
     at oracle.oai.agent.client.XMLToAOConverter.createMessageObjectUsingDOM(XMLToAOConverter.java:482)
     at oracle.oai.agent.client.XMLToAOConverter.createMessageObjectUsingDOM(XMLToAOConverter.java:462)
     at oracle.oai.agent.client.XMLToAOConverter.createMessageObject(XMLToAOConverter.java:396)
     at oracle.oai.agent.client.XMLToAOConverter.createMessageObject(XMLToAOConverter.java:409)
     at oracle.oai.agent.client.AgentImpl.createMessageObject(AgentImpl.java:234)
     at oracle.oai.agent.adapter.technology.TechBridge.run(TechBridge.java:705)
     at java.lang.Thread.run(Thread.java:534)
]]></SUPPL_DETAIL>
the xml in the body of the email looks like this:
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<subject> test </subject>
and the DTD i am loading looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!ELEMENT Subject (#PCDATA)>
What could be the problem here?
Can the adapter look at the subject as well as the body?

If you are using a DTD file, please ensure that the following conditions are satisfied.
1. The message name attribute in the D3l header should match with the business event you have modeled in iStudio.
2. The object name in the D3l header (object attribute) should match with the business object you modeled in iStudio.
3. The object name in the D3l header (object attribute) should match with the value in the Object Name field in “Publish Wizard – Define Application View” page
Please design the application satisfying the above conditions.
babu

SMTP Adapter: Not sending email for one of the applications

I have a weird problem. I have three applications that need to send emails. Two of them are sending emails but the third one is not. Practically everything in the third is a copy-paste from the second application. Uses the same handler and so forth. In reality
there is no reason there should be any failure.
How can I track if my email request was sent to the smtp server in the first place and also why this one is failing? Further, anything on the smtp server that could help tracing this message. May be it is failing there?

The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent.
-Are you using Static- or Dynamic Port?
Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
instances in the Group Hub.
If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
Morten la Cour

Sender SMTP Adapter / Content Based Routing / Mapping of an attachement

Hi all,
I'm still working on my SMTP --> PI --> Proxy scenario (asynchronous). I've tried several different properties of my sender communication channel (type = mail), but I didn't find the correct configuration. Hopefully it exists.
I'm working with PI 7.0 SP10.
I get an inbound message via Mail using sender SOAP Adapter. The message payload itself is an attachement. Now I'd like to do the following:
a) Content Based Routing in Receiver Determination based on the message subject
b) Mapping of the Attachement XML message to my inbound proxy interface
Now, trying to do so, I didn't get it work. When I use XIPAYLOAD with keep attachements, I get two attachements in my inbound message (one in XI mail package format having the subject within, one with the IDoc structure I'd like to map). How can I assign the second attachement to be used for my message mapping?
When I use XIALL instead of XIPAYLOAD, I think the mapping will work but my subject for content based routing will be lost, right? That one I didn't get running because of another failure, so I don't know the exact behaviour of the adapter for that configuration.
Anybody out there who know the correct configuration for the sender mail adapter for my small scenario above?
BR
Holger

Hi Stefan,
sorry for misunderstanding, for sure I'm using the mail adapter, not the SOAP Adapter. I'm actually on the same direction. I'm using XIPAYLOAD as message protocoll (having the attachement as the content for the mapping --> correct). Furthermore I've also found the predefined context objects for the content based routing receiver determination.
What I missed was setting the following properties in the communication channel:
To store adapter attributes in the message header of the XI message, set the Set Adapter-Specific Message Attributes indicator.
The following attributes are added to the XI message header if the sender makes them available, and if the Variable Transport Binding indicator is set.
Now it's working
BR
Holger

How to work with SMTP - DB adapter

Basically I want to know the design time process in iStudio for SMTP adapter.
I am pretty fine with FTP adapter and DB adapter. I have seen some scenario with FTP Adapter to FTP Adapter, FTP to DB, DB to FTP. When working with FTP adapter, at design time we usually create a Business Object with the event by locating DTD for it, then we publish, subscribe and transform. So here basically we know what kind of DTD has to be created for the message to get transferred between two FTPs.
But in SMTP, what kind of DTD has to be created. We have a scenario where we need to take the mail from the mail server and store them in database. So here it involves SMTP to DB adapter scenario, where I am clear with DB but not clear how to go about with SMTP. I mean, what kind of element has to created in DTD at design time.
Please anyone can guide me....

Hi Olian,
PI offers APIs to handle attachments in messages :
http://help.sap.com/javadocs/pi/SP3/xpi/index.html
If your scenario requires custom development to fulfill your needs, you can use those APIs in your custom adapter modules ... PI/XI also offers the PayloadSwapBean module to replace payload with one of the attachments
Hope this helps
Chris

MIME settings in reciever mail adapter.

Hi,
We are trying to send the emails from XI system through SMTP adapter to a legacy system.
The Legacy system wants file in the MIME format.
At the XI end we have done the java mapping for the email configuration. Also, the configuration has been done to set the outgoing message format as MIME.
The issue is the legacy system is not accepting the mail sent by our system.
The issue has been found in few files. As in the legacy system is accepting randomly some files sent by our system.
Please advice whether the error can be at the XI configuration end or it is at the legacy system end.
Appreciate your quick responses.
Regards,
Alpa.

Hi Jyothi,
The MIME settings was there in the reciever mail adapter.
Please note that the system was working fine since last month.
The legacy system was recieveing the data sent by XI system since last month.
There has been no changes done at the XI end and the reciever adapter end till now.
Moreover now some files are being accepted by the legacy system.
for eg. lets say if the system sends the files in sequence-1 2 3 4 5
Randomly the legacy system is accepting file 1 and 4.
We dont see any difference in the way the files are being created and sent in the XI end.
The legacy party is claiming that no changes has been done.
So wanted to know where to look for the possible cause of error.
Regards,
Alpa.

Change encoding of input message sent by J2EE Adapter

Hi all,
I get a input message with a wrong encoding (Sender SMTP Adapter). Within XML prolog, there's a declaration of UTF-8. Having a look at the message, it's ISO-8859-1 encoded. That mean's I've to do one of the following options:
a) change encoding declaration in XML prolog to the correct one: ISO-8859-1
b) reencode the entire message from ISO-8859-1 into UTF-8, so that the message encoding matches the XML prolog
I've found two possible solutions, but I don't know if they're working:
1. usage of XMLAnomyzerModule: reading the documentation, it seems to be that I cannot use that module in a sender adapter, right? If I'm wrong: what does the module do? Does it just exchange the encoding declaration in the prolog or does it reencode the message?
2. running that small XSLT mapping before my own mapping: would it change the encoding declaration from UTF-8 to ISO-8859-1 in the XML prolog?
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" encoding="ISO-8859-1"/>
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
BR
Holger

Hi Stefan,
thanks for your reply. Unfortunately it's not my application who's sending the wrong message and it's not possible to change it on sender side. I don't know why but it's like that
So it's exactly like you've mentioned: when using special characters where ISO-8859-1 codepage differs from UTF-8, we've a problem.
When I understand you correct there's a adapter module TextCodepageConversionBean which changes the encoding, right? Then I could use it to encode the inbound ISO-8859-1 message to UTF-8 (which is declaration in XML prolog).
Where can I find more information how to use it? Searching SDN I've just found one other thread where the same module is mentioned, but without further hints.
BR
Holger

Using WCF Cutom Adapter to return CLOB (or similar)

Hi all,
I am trying to return mulitple sets of data from an Oracle table each of which exceed VARCHAR2(4000).
I wish to do this in one call to a stored procedure as the intention is to assign the returned data to a messages body parts so that I can send them as multiple seperate attachments to an email (using the SMTP adapter).
My oracle stored procedure and returned data types are as follows:
    PROCEDURE get_job(
        po_job_id OUT jobs.job_id%TYPE, po_endpoint OUT data.endpoint%TYPE,
        po_job_type OUT job_types.job_type_id%TYPE, po_data OUT rec_data_table);
    TYPE rec_data_table IS TABLE OF rec_data
       INDEX BY BINARY_INTEGER;
    TYPE rec_data IS RECORD (
        data CLOB
        --data VARCHAR2(4000));
If I do restrict the data to VARCHAR2(4000), as shown commented out in the rec_data RECORD above everything works fine.
However, to return anything larger I believe would require me to return a CLOB (even though I would probably only be returning data of a few MBytes not GBytes).
Having tried this I get the following error:
"The adapter "WCF-Custom" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.TargetSystemException: ORA-03113: end-of-file on communication channel
Process ID: 499868
Session ID: 201 Serial number: 33735 ---> Oracle.DataAccess.Client.OracleException: ORA-03113: end-of-file on communication channel
Process ID: 499868
Session ID: 201 Serial number: 33735"
I am using Oracle 11gR2, BizTalk 2010 and the WCF adapter with oracle bindings.
Researching this I find conflicting information:
"LOB types: The WCF-based Oracle DB adapter provides rich support for BLOB, CLOB and BFILE types in tables and stored procedures/functions. The adapter also exposes special operations for streaming BLOB/CLOB/BFILE data in the WCF service model
interface." Source: http://blogs.msdn.com/b/adapters/archive/2007/10/29/biztalk-oracle-adapter-vs-wcf-based-oracle-db-adapter.aspx
“Due to the limitation of associative arrays, PL/SQL tables or PL/SQL tables of records that contain any of the following data types are not supported in the Oracle Database adapter:
BFILE
BLOB
CLOB ……….”
Source: http://msdn.microsoft.com/en-us/library/dd788520.aspx
Also, this post (http://social.msdn.microsoft.com/Forums/en-US/303cc67c-5e01-4ecb-ba5c-184a1d73a7f7/biztalk-wcf-adpater-oracle-store-procedure-returning-clob?forum=biztalkediandas2) seems to indicate
it is possible but there is no detail so not sure if it matches my requirements.
I have also had a quick look at the
Operate_LOB sample but not sure if this will provide me with the solution I am after as I really wanted to return an array of CLOBS (or similar).
I have seen various other posts but nothing that definitively answers my questions and from my tests I would say that I can’t easily return largish amounts of data (a few MBs) in a single element
from Oracle …. unless of course I am missing something.
Can anyone give me a definitive answer as to whether I can do what I have set out above … if not I will turn my attention to a different solution.
Many Thanks for any help/advice you can provide,
Regards,
Dave

From your description, it can hardly give precise troubleshooting for this problem, you can
consider opening a support case with us. Visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx

Dynamic SMTP Port Error -Class not Registered

Hi,BizTalk receiving the Invoice Message from Source and doing some transformation.After that Biztalk will send email dynamically via SMTP .Below is the code in message construct message assignment shape
multipartMessage1.MessagePart_1= XMLdoc;
multipartMessage1.MessagePart_2="This is message part2 as a string";
multipartMessage1(SMTP.Subject) ="Email From Dynamic Port";
multipartMessage1(SMTP.From) ="[email protected]";
multipartMessage1(SMTP.SMTPHost) ="100.110.120.99";
multipartMessage1.MessagePart_2(MIME.FileName) = "Attachment_Name";
multipartMessage1(SMTP.SMTPAuthenticate) =0;
SendInvoicePort(Microsoft.XLANGs.BaseTypes.Address)="mailto:[email protected]";
When run the application, getting below error message.
A message sent to adapter "SMTP" on send port "HelloWorld_1.0.0.0_Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule_SendInvoicePort_d7ce16ba803d4f87"
with URI "mailto:[email protected]" is suspended.
Error details: Class not registered
MessageId: {0D6BBA1A-F384-4AD9-8B48-44A9C342DEFB}
InstanceID: {EAFEADE1-8D05-4A7D-A908-7BC297788D06}
After googling ,I have added
multipartMessage1 (SMTP.EmailBodyTextCharset) = "UTF-8".but no use.
I’ve spent many hours on this issue .Please advise how to resolve this issue

Hi Singam,
What is the default handler(host) configured for SMTP Adapter. Check it is 32 bit or 64 bit.
This seems to be a known issue if Host is of 64 bit.
Retrieving the COM class factory for component with CLSID {254B4003-2AA7-4C82-BB2E-18BA7F22DCD2} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
When you use BizTalk in 64 bit version, and the Mime/Smime encoder you’ve got this error. To resolveit, just put your pipeline on a 32 bit Host.
Mime/SMIME encoder error :
Class not registered (Exception from HRESULT: 0×80040154 (REGDB_E_CLASSNOTREG))
http://social.technet.microsoft.com/wiki/contents/articles/7204.biztalk-server-list-of-errors-and-warnings-causes-and-solutions.aspx
As you are using Dynamic Send Port it will run under the default host make it of 32 bit, restart the host and see if the issue is resolved or not.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

SMTP Adapter

Similar Messages

Maybe you are looking for