SMTP issues for ports 25, 993 and 995

I recently became suspicious that I wasn't getting mail addressed to [email protected] or [email protected] and I have become even more suspicious the past couple of days when I have received email in my Mail account on the iPod Touch but those emails never came to Mail or MobileMe on my laptop.
In Terminal when I type telnet.smtp.mac.com 25 it tries 17.148.16.33 and connects to smtp.mac.com and I get the same result with me.com. However, when I try port 993 or 995 I get "Trying 17.148.16.33...." and it never finishes.
By contrast, telnet smtp.gmail.com tries 74.125.159.109 and connects to gmail-smtp-msa.l.google.com with 25 and 993 and 995
Settings in Mail
under MobileMe IMAP account>
incoming server mail.mac.com
outgoing server smtp.me.com:user (Q? should these both be mac or me)
advanced>
IMAP path prefix (blank)
Port 993 (greyed out)
Use SSL and Use IDLE are checked
Settings in Network Preferences
DNS Servers 10.0.1.1
Settings in Airport Utility
Internet > TCP/IP > DNS Servers > 97.64.180.150 and 97.64.168.13
I would appreciate any help you could give me...are there obvious discrepancies in my settings and changes I need to make?
Would using Google DNS numbers help?
I have a "grandfathered" .mac address as I joined in 2005. Since new subscribers are assigned .me addresses are there things I can/should do to get rid of any .mac "remnants" which might be screwing things up?
Thank you in advance for your help
Don't know if this is related but I undated my Airport Express firmware a couple of weeks ago. Mediacom provides me with an Arris TM602G modem.

Hello,
I have created a new thread http://discussions.apple.com/thread.jspa?threadID=2755782 (Using Greek Characters in Folder naming possible?) in order not to disrupt the flow of this thread.
It seems that only two persons with greek origin and OSX server are posting in Apple DIscussion - this is why I contacted you this way.
The sharepoints are in Latin Characters - the sub folders are in Greek and only users other than the Server admin have this issue ...
... the Characters change from uppercase to lowercase and the user is 'thrown' to the previous directory structure level - thus cannot access the subfolder.
When I changed the name of the subfolder to latin characters it worked.
It is not a major issue, but it is very annoyng especially if you have to change to greeklish Names of clients....
Thanks for your prompt reply, Kostas.

Similar Messages

Known Issues for Windows 10 SDK and Tools

Please read about Known Issues for Windows 10 developers in the Known Issues for Windows 10 SDK and Tools
forum

To fix this issue, your computer must be connected to the internet to download these components.
Make sure your computer is connected to the internet.
Open Control Panel, and select Programs and Features.
Select Microsoft Visual Studio 2015 RC, click Change, and then click
Modify.
Select the feature “Universal Windows App Development Tools”, and click
Update.

Any know issues for JRE 1.6 and BOXI 3.1

Any know issues for JRE 1.6 and BOXI 3.1

Our most stable JRE with which we've had best results has been JRE_1.6.0_07
Hope this helps.

My laptop y510p has an issue for the third time and i need a replacement

my y510p laptop got an issue for three times and i need a replacement
i bought it in april/2014 and more than 2 and half months wasted for maintenance.
first time:
after few weeks i got problem with screen colors and i sent the laptop and the problem was in the motherboard and they replaced it.
second time:
i got it from maintenance center with 2 issues:
1- camera wasn't working
2- suddenlly freeze from time to time , sometime a blue screen appear after , i need to turnoff laptop from the power button to work again and it takes so long to open after that.
i sent the laptop again.
note: maintenance center claims that there wasn't any issue and even the camera that they told me that they fixed it they didn't wirte it in report. that's what i figured out when i talked with lenovo customer services
third time:
suddenly freeze from time to time again when i tried to enter bios immediatly after freeze happen i found that
harddisk wasn't appearing.
so i sent it again and i asked for replacement
maintenance replied that it's a motherboard and hardisk issues.
stayed there for 45 days and i called them for like 7 times to know what is the reply on my request and every time they ask me to wait more.
today i called them and they told me that the request of replacement is refused ...!
and they told me to post a message here if i insist on replacement.
laptop serial no:xxxxxxxxx
Mod comment: Removed Serial number for posters security.

It´s crazy how many people have the same kind of problems with this computer.. and what´s even worse is that it seems that the only option is to send it to Lenovo for a motherboard replacement. I have the same problem (mainboard dead) but unluckily for me, my y510p is out of warranty (I only used it for like 4-5 months then it was stored while I was away). Everyday I get on the internet to look for a motherboard replacement myself but I just can´t find any.. Why is that?
Also, this is a "new" computer, if I´m not wrong it was released around the end of 2013. How is it that they already discontinued it? Do they usually discontinue their products that fast? Or is it perhaps all these Y510P computers had problems from production? How can someone spend over a thousand dollars, use the computer for a few months (normal use, not even gaming..) and one day is dead and the motherboard needs replacement?? Why nobody really complains about this? I really don´t know what to do as that were all my money. I really just want to get rid of this crap and never ever buy Lenovo again and never ever recommend it to anyone. I don´t even feel secure spending the money on a motherboard replacement because it seems to me that the problem will come back. Because as I said this seems to be a problem in their production of this particular model. Again, over a thousand dollars computer and its quality is worst than the cheapest ones.. shame on Lenovo.

Video Issues for Native YouTube app and all Web pages

Hello,
I seem to have a problem with my Sprint Palm Pre. All of a sudden Im getting an error of 'there was an error playing the file' for ALL Youtube file using the Palm Pre Youtube app. As well as all of the we sites that were working a few weeks ago.
Any ideas?
thanks,

Have you tried a restart from device info, reset options? This will resolve many problems and is the first thing I would try. I have not heard of any problems with the YouTube app. I have tested the YouTube app on my own Pre Plus an it is working without any issues. Have you installed any 3rd party (homebrew) apps? Some times this can cause a problem with installed apps.

Routing issue for remote vpn user and spoke

Hi all,
i have configure VPN (see attached file)
before upgrading ASA from 8.3 to 8.4, SPOKES was able to communicate between them and also remote VPN users was able to access spoke site.
after upgrade ASA HUB, neither spoke-to-spoke nor remoteuser---to---spoke cannot communicate
here is NAT exemption configuration on ASA HUB. only this ASA have been upgrade. nothing have been done on other site
object network 172.17.8.0
subnet 172.17.8.0 255.255.255.0
object network 10.100.96.0
subnet 10.100.96.0 255.255.240.0
object network VPN-SUBNET
subnet 172.20.1.0 255.255.255.0
nat (outside,outside) source static 172.17.8.0 172.17.8.0 destination static 10.100.96.0 10.100.96.0
nat (outside,outside) source static 10.100.96.0 10.100.96.0 destination static 172.17.8.0 172.17.8.0
nat (outside,outside) source static VPN-SUBNET VPN-SUBNET destination static 10.100.96.0 10.100.96.0
nat (outside,outside) source static VPN-SUBNET VPN-SUBNET destination static 172.17.8.0 172.17.8.0
same-security traffic permit intra-interface
same-security traffic permit inter-interface
Please do you know what can be the problem ?
thanks so much for your help

Since you are not NATing any of those traffic and it's a u-turn traffic, pls remove those 4 NAT statements. They are not required at all.
Pls "clear xlate" after removing it and let us know how it goes.

XML Publisher: issues for a large data and datatemplate

There is proposal to build a data template with query consisting of 350 columns and the query is expected to fetch around 10000 rows. The data template will have all 350 columns as elements.
In the report, the user can select and show whatever columns it wants.
Apart from tuning of the sql query, what are the other issues involved in the above case.
thanks and regards

I guess,
its gonna take time to get the data into xml from DB,
and
of course, if you attach the template with lot of grouping, which i suppose is going to happen after by looking at the no of columns you have...
wil be heavy on output generation part,
if the template is going to be little complex one, then it wont be a problem :)
what kind of issues you faced till now ?

I am so frustrated I could spit.. I have been experiencing issues for 1 week now and am unable to use my iphone. It started by shutting down every time I'd try to use it and now it won't turn on. When I plugged it in the charger apple flashes .

i have been unable to use my iphone for going on a week. It started by shutting down when ever I'd try to use it. Now it has just a dead black screen. If i plug it in it doesn't charge And the flashing apple continues every 2seconds never charging or turning on. I'm frustrated because I can't even get in to troubleshoot. I bought an iphone cuz I thought it was the best phone at the time. My contract isn't up til Aug. and I'm stuck with a bill and no phone. I do not own a computer but I have an ipad4 which I love. HELP!

Make an appointment at the genius bar are your nearest Apple store. At this point there is nothing you can do without a computer, so if you don't have one and don't know anyone who has one that you can use the Apple store is a good fallback.

Issue for integration between GL and AR AP

Hi All,
We have problem with integration real time between GL and AR AP follows:
- now system automatic transfer realtime Data from AR or AP module to GL. but my customer don't want transfer automatic realtime because on AR or AP module may enter data incorrect at the end moth they chage and transfer to GL.
pls let me now how to disable transfer automatic this function.
Thanks for support

Hai
I think Hold documents function will very much suits to your rqquirement.Any way Hold documents will not have any impact in the financial transactions and will not even post in GL accounts.
when ever u feel that the dodument is completley correct u can post the hold documents.
Regards
Raghavendra.M
SAP-Practice

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Goods Issue for Reservation using Bar Code System

Hi,
Our client wants to use RF devices to post the goods issue for reservations (movement 261) and reversals of these movements (262). I have checked the RF t codes and I do not see this functionality available.
Typically client wants to select a reservation from the list (run MB26 on handheld) and then post GI by selecting the reservation.
Can anybody suggest how to handle this situation using handhelds?
Thanks,
-Shekhar

HI,
you should developed your own transaction for this functionality.
You can find some documentation on service.sap.com/scm [Radio Frequency (RF Programming Guideline) |http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000341390&]
Andrzej

InApp purchase issue for my newsstand app

Hi,
I am having a strange issue while subscribing for auto renewable product.
I have created a test user account and which works fine for non renewable product and restoration. In the case of auto renewable subscription, it is asking for test account verification and couldn't test the auto renewable subscription. Why it's required for test account. Following is getting me
Verification Required
Before you can make purchases, you must tap Continue to verify your payment info.
[Environment: Sandbox]
I have created almost many test user accounts in itunesconnect now with no luck, i always sign out of the app store on the device before running the app for test, then use the test user log in when testing the iap in the app itself, but keeps saying the same thing.
I tried all the ways mentioned in many posts for the similar issue, like not logging in to itunes account from settings page. But no luck. The strange thing is that non renewable purchase and the restoration process works fine with the same account. Any ideas? I am facing this issue for the last week and I could release the app because of this bloody issue.
Thanks and regards,
Sree

Well, what happens now when you try to purchase a gem with your new card info?

Lync 2013 Web Scheduler SMTP Server for invitations - non-exchange env

We cannot get the Lync 2013 Web Scheduler to send email invites to anyone even after configuring the SMTP server for both the external and internal sites on our one and only front-end (we did the super simple same box install for testing
purposes). Yes we have done an IISReset;) Has the SMTP server configuration process for the now built-in Lync 2013 Web Scheduler changed since the add-on Lync 2010 Web Scheduler?
BTW, unless we haven't search for the right phrase(s), it seems there is ZERO documentation about configuring this for 2013 - only for 2010.
HELP!!!

Hi,
You can refer to this blog Lync web scheduler without Exchange:
http://blog.lyncfreak.com/2011/11/02/lync-web-scheduler-without-exchange/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

IMAP, POP and SMTP information for manual email setup

How to manually set up your Telstra email service:
Telstra email on the BigPond platform
POP & SMTP
Your name
Enter your name as you’d like it appear in emails you send.
Account type
POP3
Incoming server details
Server address
mail.bigpond.com
Port
995
Encrypted connection
SSL
Outgoing server details
Server address
mail.bigpond.com
Port
587 or 465
Authentication
Yes
Encrypted connection
With SSL Encryption
Username
Enter your full email address (ending in '@bigpond.com' or '@bigpond.net.au')
Password
Enter your Telstra email account password which will be case-sensitive.
Other settings to check
Ensure the checkbox is ticked for Outgoing server requires authentication – in most mail clients, this is not ticked by default.
Use:
Secure Sockets Layer (SSL) with the POP and SMTP connection, and
SMTP authentication for security.
Ensure that your operating system and email client have the latest updates.
Telstra email on the Outlook.com platform
If you’re on the Telstra email platform with Outlook.com®, you can choose either of the following types of settings to set up email on your computer, tablet or mobile phone:
IMAP and SMTP
POP and SMTP
Where possible, it’s preferable to use the IMAP & SMPT settings as they provide an extra layer of security.
IMAP and SMTP
Your name
Enter your name as you’d like it appear in emails you send.
Account type
IMAP
Incoming server details
Server address
imap-mail.outlook.com
Port
993
Encrypted connection
SSL
Outgoing server details
Server address
smtp-mail.outlook.com
Port
587
Authentication
Yes
Encrypted connection
With TLS/STARTTLS (preferred) or SSL Encryption
Username
Enter your full email address (ending in ‘@bigpond.com’ or ‘@bigpond.net.au’)
Password
Enter your Telstra email account password which will be case-sensitive.
Other settings to check
Ensure the checkbox is ticked for Outgoing server requires authentication – in most mail clients, this is not ticked by default.
Use:
Secure Sockets Layer (SSL) with the POP and SMTP connection, and
SMTP authentication for security.
Ensure that your operating system and email client have the latest updates.
POP and SMTP
Your name
Enter your name as you’d like it appear in emails you send
Account type
POP3
Incoming server details
Server address
pop-mail.outlook.com
Port
995
Encrypted connection
SSL
Outgoing server details
Server address
smtp-mail.outlook.com
Port
587
Authentication
Yes
Encrypted connection
With TLS/STARTTLS (preferred) or SSL Encryption
Username
Enter your full email address (ending in '@bigpond.com' or '@bigpond.net.au')
Password
Enter your Telstra email account password which will be case-sensitive.
Other settings to check
Ensure the checkbox is ticked for Outgoing server requires authentication – in most mail clients, this is not ticked by default.
Use:
Secure Sockets Layer (SSL) with the POP and SMTP connection, and
SMTP authentication for security.
Ensure that your operating system and email client have the latest updates.
Outlook is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Re: BigPond settings for POP, IMAP and SMTP
I am have trouble with Apple: they claim that because I have not physically changed my email address they won't "accept" it! (it's same one that I have had for the past 5years),
I am also unable to log on using the email address & password that I have for past 12 months!
Can I change my email address and password, when I have time (during business hours), regards Eric

Keychain Issue with Entourage SMTP password or port attribute

I am posting this under Using OS X rather than Mail since I do not
use Apple's Mail. The problem is the Microsoft Entourage or something
may be sending bad information to the OS X keychain and this prevents me
from sending mail to my ATT/Yahoo account. The workaround I have
been using to send mail is use the OS X Keychain First Aid repair.
After the repair Entourage will send the message one or two times then
I get the following Keychain verification error note:
Item “pop.att.yahoo.com” has unspecified value for port attribute
Item “smtp.att.yahoo.com” has unspecified value for port attribute
Problems were found; you should choose the Repair option to fix them
Verification failed.
The Repair option corrects the problem until the next message is
sent. I have done everything I can think of to the Entourage v12.1.7
settings and something is still not right.
I am beginning to suspect a Keychain bug or error but have no idea
how to get the correct attribute written to the keychain.
Maybe someone could provide some terminal commands to the will
help me write the correct password and port attribute to the keychain.
I am open to any suggestions to clear being nagged every time I
need to send a message to enter my password. The POP mail works
fine. This seems to be an issue with the password that is required
by the ATT/Yahoo smtp server.

If you are sure your primary account is setup correct (per the above URLs), open
the Applications/Utilities/Keychain Access.app and go to Keychain Access/Keychain
First Aid and click on the Verify and Repair if necessary.
FYI, Entourage will write errors to the keychain if you have the account setup wrong.
My error (that cause the keychain errors) was I typed in the my ID and password in
the smtp option. Check the box to use the received and do NOT type in the address.
When you save the settings with nothing in the boxes, Entourage will do it for you
and it will work.
I don't know why but it will not work if you type in the info. Just follow the rules
and it will work
Try It!!
Message was edited by: aRKay

SMTP issues for ports 25, 993 and 995

Similar Messages

Maybe you are looking for