Snake on 2610

hello folks!
i have a nokia 2610 and i want to play the games snake and pocket carron on it.
i dont have access to the internet on phone, so i have to download it to my pc. then i can transfer the games with a cable to the phone.
are these games available on nokia.com?
peter

I'm sure there is a download for snake somewhere on this site. If you can't find it pm one of the mods.

Similar Messages

New iMac can't find photosmart 2610 over network -- HELP

Just got a new iMac 24" 2.8gig with Leopard. Most of the setup went fine, but the computer steadfastly refuses to see my printer over the wireless network. It is an HP Photosmart 2610.
I have used the same printer wirelessly with a MacBook Pro with no problem -- it found it right away, though that was with Tiger (it still worked after it was upgraded to Leopard). It also works great with 3 Windows WP PC's, two wirelessly and one via ethernet.
My Router is a Cisco 800 series and I use a Cisco WAP. The iMac had no problem connecting to the WAP and Internet.
The core problem is the iMac doesn't acknowledge that the printer exists. It doesn't find it automatically and when I direct it to the correct IP is still doesn't find it. Also, Leopard doesn't seem to have the driver for it. When I search for drivers from the pull-down after entering the IP I get a bizillion HP options including many Photosmart's. But the lowest model # without a letter in front of it is the 3300.
I then tried downloading the dirver from HP. It said it installed successfully but still didn't show the driver from the pull-down. When I tried used "other" and directing it straight to the driver it would act like nothing happened and come back to the same pull-down without the 2610 as a choice. I also tried installing HP's entire all-in-one software suite for 10.5. It installed sucessfully but also doesn't see the printer.
I tried temporarily moving the iMac and connecting it to the 2610 via USB. It suddenly found it no problem -- both the iMac software and the HP software. And it worked fine... The moment it was back via network, it doesn't find it despite it still working fine from every other device in the household.
Not sure what there is left to try. It is not an option to permanently have it connected by USB. I spoke with HP and they say that because it works from every other device. They say it is an Apple issue. Apple says it must be an HP driver issue points me back to HP. So I am left in limbo with no functional printing capacity.
I've tried searching the Internet for any reports on this but can't find them. Others seem to be successfully using the 2610, though it is unclear if others were using it via the Network.
Any help is greatly appreciated. I am beginning to wonder if HP ceased supporting the network functionality in their 10.5 driver update but I can't get an answer on this.
Thanks.

To be specific, since the Apple Printers and Faxes function does not find it in the "Default" list, I select "IP" and then enter the valid IP address that I know to be for the printer. I have tested it multiple times from other devices to confirm the IP address and even printed a network diagnostics page from the printer to confirm it. I even had someone else review it for typos just to cross every base...
It then accepts it as a "valid" IP address and assigns it a "Generic Postscript Printer." I then chose the pull down for "other" drivers. I just checked again. There is no driver called "HP IP". There are hundreds of HP drivers those. I am looking for the HP Photosmart 2600 series. But the lowest series they list is the HP Photosmart 3100 series.
Again, I have covered all the bases I can think of. The Apple site lists the 2600 series as an included driver in Leopard but it isn't showing up. The HP site lists the 2610 as "Leopard ready." I have downloaded and run the OX 10.5 HP 2600 series driver executable from HP and it says it was successful (tried several times). I also downloaded and installed the entire stupid 400-and-something MB software "all-in-one" software suite for the 2600 series from HP. You can run its own setup program indpependent of the Apple one and it doesn't find it either. When you enter the IP is says it found no printer and refuses to continue the setup. I have turned the printer on and off many times and checked all the connections. I have confirmed that the other PC's in the household are in fact seeing it at that IP...
I have spoken with Apple Tech Support ("it must be an HP driver issue, sorry") and HP tech support ("it must be a problem with your Mac because it works for others... but perhaps we can sell you a new printer that should work better" (no kidding, they actually tried to do this!).
On principle (and practical) grouns I am reluncant to get a new printer when the one I have works perfectly well for everything accept this Mac. But I am totally out of options unless someone can help.

How can I scan multiple items using my HP photosmart 2610 and them be able to be in one attachment?

I have an HP photosmart 2610 4 in1. How can I scan multiple items and put them in the same attachment using e-mail? Using my laptop.

Hi @needyrhelp,
Welcome to the HP Forums!
I see that you are wondering how to scan multiple items using your HP photosmart 2610 and for them to be able to be in one attachment in your e-mail. I am happy to look into this for you!
Please see the how to scan guide for the Operating System you are using. Here is the list of how to scan guides, Scan. Select your Operating System from the list, then select How to scan with HP software, then How to scan a multi-page original text document into a single file. You will need to scan each page one at a time, and add it to the same document. The how to scan guide will show you how. After done scanning to the file, then see the link for How to attach a scan to an email.
If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Looking for HP Basic Driver only for hp 2610 all-in-one printer

I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
Regards
Tech

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Problems Printing to HP 2610 All-in-one

Hi Folks,
First off, I'm a Windows person so please don't assume I know the internals of OS-X very well (my wife is the Mac user, but is not the household "techie"). That said...
When we try to print documents to the HP 2610 All-in-one (USB connected directly to her G4), the print dialog comes up looking "almost" normal. The bottom of the print dialog only offers a "?", "Supplies.." and "Cancel" (but the left half of the cancel button is chopped off). "Send FAX Now" (greyed out) is also there. No print button! "Supplies" offers to sell me ink cartidges and "cancel" of course cancels the print job. Where is the "Print" button and how do I get it back?
System preferences, System Profiler shows the printer as available, the default, USB and running HP driver version 7.3.0 (the latest one HP offers and the one I installed after upgraging to OS-X 10.4.3) is 7.3.1). System Preferences, Printers also shows the printer as available and on a USB port.
I have tried printing from TextEdit, Office:X Word: Service Release 1 and AppleWorks 6 (6.2.2) and get the same messed up print dialog.
Oddly... the system has no problems printing to a Brother 1440 Laser (not defaulted) connected via USB to one of my Windows XP Pro systems. It can't print to it's direct connected USB HP 2610.
Dual 1.25Ghz PowerPC G4 Mac OS X (10.4.3) 768MB DDR SDRAM

Hi Folks,
First off, I'm a Windows person so please don't assume I know the internals of OS-X very well (my wife is the Mac user, but is not the household "techie"). That said...
When we try to print documents to the HP 2610 All-in-one (USB connected directly to her G4), the print dialog comes up looking "almost" normal. The bottom of the print dialog only offers a "?", "Supplies.." and "Cancel" (but the left half of the cancel button is chopped off). "Send FAX Now" (greyed out) is also there. No print button! "Supplies" offers to sell me ink cartidges and "cancel" of course cancels the print job. Where is the "Print" button and how do I get it back?
System preferences, System Profiler shows the printer as available, the default, USB and running HP driver version 7.3.0 (the latest one HP offers and the one I installed after upgraging to OS-X 10.4.3) is 7.3.1). System Preferences, Printers also shows the printer as available and on a USB port.
I have tried printing from TextEdit, Office:X Word: Service Release 1 and AppleWorks 6 (6.2.2) and get the same messed up print dialog.
Oddly... the system has no problems printing to a Brother 1440 Laser (not defaulted) connected via USB to one of my Windows XP Pro systems. It can't print to it's direct connected USB HP 2610.
Dual 1.25Ghz PowerPC G4 Mac OS X (10.4.3) 768MB DDR SDRAM

WRT16N can't find HP Photosmart 2610

I just purchased the WRT160N to replace my WRT54G. The installation CD allowed my to input the HP2610 IP address but the software installed it as a local printer attached to my desktop. The new LELA software which was installed from your website can't find the HP2610. The WRT54G had the HP2610 installed as a network printer so I could share it. I have two computers and the HP2610 in my network. The first is a HP desktop hard wired to the WRT160N and the second is a Toshiba notebook connected wirelessly. The HP2610 is also hard wired to the WRT160N.
How can I get the HP2610 installed as a network printer on the WRT160N network?

I found the problem. It was necessary with LELA to delete the old IP address from the HP 2610 's memory. After I did so, I launched another search with LELA and the printer was found. My network is now complete.
I hope the message helps someone else.

Can i connect av out from my analogue camera to the headphone jack of my ipad air so i can record. The camera is a mini see snake drain inspection camera with no record options.

I Have a Ridgid mini see snake drain camera for inspecting pipes and i would like to connect it to my ipad so i can record what i see. The camera monitor has an av out jack which i previously connected to a windows laptop via usb for recording. I use an ipad air now and would like to know if this can be achieved with the ipad, rigid are uncertain.

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

Is there anything I can do to make my (old faithful) Photosmart 2610 work with Windows 8.1?

I recently upgraded to Windows 8.1 I do not have an installation disc for my (old faithful) Photosmart 2610 All-In-On 64 bit and I am wondering if anyone can tell me a way to 'get' my computer and printer to work together again.
This question was solved.
View Solution.

Dear verve1,
Here you have the full software to install you multifunction in Windows 8.1:
http://ftp.hp.com/pub/softlib/software12/COL30951/mp-110188-2/AIO_CDB_Net_Full_Win_WW_140_408-4.exe
I hope you find it helpful.
Greetings.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
and click on the icon if you want acknowledge the assistance.

Need help with changing my region to accept EU ink cartridges on Photostat 2610

I have permanently moved to Poland (Europe)from Canada. I have brought with me HP printer Photo-smart 2610 All in one Ink cartridges do not work . I found out ,that I have to change a region for my printer to accept different inks. In Canada I was using nr 94 and 97 inks In Poland they offered me 339 and 344 (xl version) HP original. I have found out ,that it is possible to change those settings contacting HP technical support. I am available under my E-mail {Personal Information Removed}. If it is necessary session could be arrange.
Thank You and Best Regards,
Rafał Kasperek.

Hello Kasperraf,
That is very strange. When you contacted the support in Poland, was it on this number: (22) 583 43 73? They have all the tools necessary to change the region of your printer.
The printer you have is almost certainly out of warranty but that should not matter for when you need to change the region of your printer. You should refer them to this document:
"Finding and Installing Cartridges after Moving to Another Country"
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02558798&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...

I cannot print photos with my 2610 Photosmart All in One. It does all else well, I get a message tha

My Photosmart 2610 All in One works percectly except it wont print photos from my files. The printer is about 6 years old and is no longer supported by HP. I have the original set-up disc. Can I use it by using that set-up disc?

The router has to support Bonjour for airprint to work. I don't know whether yours does or not - hopefully someone else will be able to say. One frequent suggestion for this problem is to be sure you router has the latest firmware installed.

Photosmart 2610 all-in-one Scan preview does not display

Recovering from a hard-disk crash, I've just reinstalled my Photosmart 2610 all-in-one using the driver and software package for Windows XP : rub_W01_Americas_Euro1_NB.exe. downloaded from the HP support site. All seems to be running well, except for a glitch when I try to scan: the document Preview does not display. I have made certain that the Preview checkbox is duly selected, but nothing seems to help. It is the same whether I'm scanning a picture or a document. It also makes no difference whether I launch the scan from HP Director or from within another application.
Note that if I click Accept, the document (or picture) will indeed be scanned and saved. But I won't see it until I open it with some other application.
Thoughts, anybody?
Thanks!
James

Hello James, welcome to the forums
I understand you are unable to see your scanned preview with your Photosmart 2610. I would suggest the guide below to use for troubleshooting steps for this issue.
Scanning Stops at the Preview Screen when the Printer is Connected to the Computer with a USB Cable ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My HP photosmart 2610 all in one will print by not allow me to save or send a scan

My HP Photosmart 2610 all in one will scan but will not allow me to save the scan or email the scan. i assume it is a bug with maverick.....which i recently downloaded

Does this thread help?
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

HP 2610 All in One Utilities Problem

Hi, I've got a problem with my HP 2610 All in One Printer. I'm trying to clean the cartridges/check the ink levels etc, and normally I would have done this by choosing the printer from the System Preferences printer section, but when I click the Utilities icon, an error message says that the printer was not turned on or connected.
I've uninstalled the software, reinstalled the basic printer driver, but the problem still persists. It won't show me any ink levels, allow me to clean, align etc because of the fact the Mac thinks the printer is turned off, despite the fact that I can print to it.
Any ideas? Thanks in advance!

I also tried plugging the USB cable into the actual computer rather than the keyboard, but it had the same effect.

Snake javascript game - help!

Hi guys,
I have to create the good old game of snake which can be found on mobile phones.
I have 9 main tasks to complete, and am inexperienced with Java so would love any feedback!
Have to first write table cells to fill out the general area for the game, I think this will be fairly easy, using the document.write method inside a for loop. I then have to add keyboard controls to move the pixel around the area.
The next stage is to move the pixel automatically in one direction, I think the window.setTimeout method can be used here, not too sure how to implement it though. When it reaches the boundary, the pixel must be stopped. These 2 stages then have to be combined so that the pixel moves automatically until it either changes direction through a click of an arrow key of it hits the boundary. Next is to add a popup notifying that the snake has hit the boundary and stop the timeout. Then the snake has to grow each time it comes in contact with a single fixed pixel which moves everytime it comes in contact.
Those are the main stages I have to complete, any help would be greatly appreciated, code, links to examples, anything like that,
Thanks everyone!

yeah.. java is much different than javascript. but I was seriously bored, so I took 45mins and coded a snake script that kinda.. plays by itself. I didnt code it according to your instructions cuz.. I dont code people's homework :\. anyway it should give you a big boost:
http://woogley.net/misc/snake.html

Snake on 2610

Similar Messages

Maybe you are looking for