Snapfish App

Hello! I'm aware that there was an internal HP program for employees to develop apps for Palm phones/tabs. Just wondering if a Snapfish app is on the way or on the horizon since it's an HP product as well. Would be cool... just sayin'.... There are a few third-party photo sites and apps for organizing and editing photos in the App Catalog, so why not keep it all uniform, safer and secure in the HP neighborhood of 'the cloud,' right? CujoQ37
Post relates to: Pre p100eww (Sprint)

Hi,
I afraid that Print Apps are no longer supported for your printer.
The following thread provide additional details:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-Apps-Service-Reti...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

I'm trying to use snapfish on my new iPad but it won't allow me to download adobe flash player, what should I do.

What can I do to use snappish on iPad

I'm not sure what snapfish is, but if it requires Flash you have several options:
* see if there is a Snapfish app in the App Store
* use a proxy Flash substitute such as Skyfire
* use a computer
But there is no Flash available for the iPad.

How do i install print apps?

after a few days of searching for errors i finaly get my confirmation email from eprintcenter,
so after i have register it i came on another problem. I cant install any apps on my Printer.
In eprint center it says to me: This site can not handle apps to print to your printers.
it want me to install apps from my printer GET MORE buton in my display.
when i press on it it connects to internet and it comes a text that says that i already
have all avaible apps on my printer, I only have the SnapFish app.
so my question is: does my printer only support Snapfish

Ahh well that's no good . Are you using ePrint yet? I know you said you've registered, but have you given your e-mail address out? The reason I ask is because the next thing I'd like to suggest will reset your email address. However if you are using it we can try to work around that solution until it's necessary.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Snapfish photo upload

I am unable to upload photos through snapfish. error message says blocked plug in. How can I fix?

It sounds like you are trying to use Safari or another browser. As you found out that does not work. You need to use the Snapfish app.
https://itunes.apple.com/us/app/id330035194?mt=8

ICloud 13gb full restore via wifi taking 30 hrs so far??

I wiped my iphone 4 clean and did a install from last iCloud backup. The night before last around midnight. It's halfway restored on a 13gb backup. 30+ hours later. It's been on wifi the entire time except one hour last night when I ran to then store. I'm keeping it plugged in to the power outlet too. I've seen it take a while to restore before for approx 1 FB less. It's never been this long. WTHeck is going on? Can I push this process along at all? I tried to delete some apps that are waiting to be redownloaded...and 1 minute later
They were back on the screen... So that's not helpful. LOL
Please let me know what I can do about this... It's been downloaded my snapfish app for many many hours (they all took a long time..) this one is taking soooo long

I have the iOS 5.1.1 update.

I own a HP Envy100 eAll-in-One d4100 and the only App that will work is Snapfish,

I own a HP Envy100 eAll-in-One d4100 and the only App that will work is Snapfish?

All others show a connection error - Touchsmart is not responding.

How do I get to the App Catalogue without being FORCED to sign up for your Damned Snapfish?!!!

I keep trying to see the App CAtalogue and you are forcing me to sign in through a program I hate, Snapfish. Can you help[ me use your product without such a damned program?

Patty,
Welcome to the HP Forum.
We are a community staffed and volunteer supported forum.
You are welcome here; please do be polite and considerate of us and others here with whom you are generously sharing your comments.
Which model HP ePrint printer do you have?
Have you registered for an HP Connected Account?
=============================================================================
If you would like to talk to HP directly, you may do so.
If you are in the US or in Canada, you can call Cloud Services for help with e-print:
When to call HP Cloud Services and When to Call HP Tech Support
Worldwide Support Portal
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
HP provides Administrative and Moderation services for the HP Forum.
Kind Regards,
Dragon-Fur

Can not view slidshows or creat a book on Snapfish. SF IT folks say it's a security issue on my end. Any ideas?

Can not view slidshows or creat a book on Snapfish. SF IT folks say it's a security issue on my end. Any ideas?

You will need to contact Snapfish to find out their system requirements and which plugin you need
- http://support.snapfish.com/app/answers/detail/a_id/669/brand/3

EPrint/Apps Connectivity Troubleshooting - Please Review

ePrint & Print Apps Connectivity Troubleshooting Steps – Please Review before posting
This information below is provided to help you to resolve web services connectivity problems to enable your printer to print with ePrint, launch/use Print Apps, enable web services, print your web services info sheet, or add your printer to your account on the HP ePrintCenter. Only items that have actually been shown to resolve customer issues have been included in the list.
For best results review and apply the applicable steps below in the order presented before posting a request for help in the forum, so that forum members who respond to your post can provide the best possible assistance.
Also see this post (http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Start-here-Web-Services-How-To-and-Troubleshoo...) for additional “how-to” and links to important web services information, FAQs, and Help content.
Before applying the troubleshooting information below:
If you receive an “Invalid code” message when you try to add your printer to your HPePrintCenter account, but aren’t having any other problems using ePrint and Print Apps, you most likely only need to reprint your web services info sheet from your printer. Your printer's claiming code that is printed on the info sheet can only be used to add your printer to your ePC account for 24 hours after printing the info sheet. Reprinting the info sheet doesn't change your claiming code, it just re-enables your printer to be added to your ePC account for another 24 hours. See here for the steps to re-print your web services info sheet.
If you enabled Web Services on your printer but the Web Services info sheet containing your printer’s claiming code did not print, your printer has not fully completed its web services registration and will not print ePrint emails or print app content. In this case you will not receive any error messages on the printer and you can view your printer’s email address on the printer front panel display. If your web services info sheet does not print within five minutes of enabling web services, try removing and enabling web services again. If your Web Services info sheet still does not print after re-enabling web services, you will need to wait and try again later.   If you do receive error messages when trying to enable web services, continue to the web services connectivity troubleshooting steps below.
If you have ePrint emails that aren’t printing, please first ensure you confirm your emails meet ePrint format/attachment requirements. Review the ePrint email requirements in the ePrint FAQ/Help on HP ePrintCenter at www.hpeprintcenter.com. You can also check your printer’s connectivity status and ePrint job list on HP ePrintCenter if you have created an account there and added your printer. (Always use the “Refresh” button on the ePC page, not your browser refresh button, to view updated printer connection status on the HP ePrintCenter.)
A.     Easy steps that can be surprisingly helpful – try these first:
Verify your network’s internet access is working – on a computer connected to your network, use a web browser like Internet Explorer or Firefox to view a web page. If you can’t access the internet your internet service provider may be having a service issue that is affecting ePrint/Print Apps.
Go to HP ePrintCenter and look in the News section (http://h30495.www3.hp.com/news/ ) to see if there are any service status updates. In some cases, you might just need to wait a little while and try again.
Turn wifi off and then on again on your printer and wait for a minute for your printer to reconnect to your network
Reboot your printer - turn power off and then on) and wait for a minute for it to reconnect to your network
Reboot your router - remove the power cord from the back of the router, wait a minute, and then plug it in again and wait for at least a minute for the router to power up and all your devices to reconnect.
B.      Check your printer’s IP address to confirm it is connected to your network.
Verify that your printer has a valid IP address (for example, typically 192.168.x.x on a home wireless network) by viewing the network settings screen in the Networking or Wireless menu on your device’s front panel display, or by printing a Printer Status Report (usually found on the Tools menu). If your printer does not have a valid IP address re-run the network setup process for your printer.   For more help with setting up or troubleshooting your HP printer’s connection to a wireless network, go to http://www.hp.com/go/wirelessprinting
C.      Confirm that both your printer and router have up-to-date firmware:
Having up-to-date firmware on your printer or router is important to use web services.
Check to ensure you have the latest firmware (FW) for your printer by checking for product updates, usually found under the “Web” or “Preferences” options on your printer’s menu. If your printer finds an update but is unable to complete downloading/installing it, ensure your router FW is up to date and try again. If your printer continues to fail to complete the download of an available FW update, continue to “E. Set a Manual IP/DNS Server” below.
Check to ensure that you have the latest firmware for your router – review your router documentation/help (or the router manufacturer’s web site) for information on how to check for and install firmware updates.
Resolve temporary connection failure after printer firmware upgrade
Some printers may experience connection failure after firmware upgrade. This is because the printer reboots itself after firmware updates and needs to re-establish network connection.
Check to ensure the printer has been given a valid local IP by your router (eg. 192.168.x.x if DHCP is used) before trying to access print apps or using ePrint. You can see your printer’s IP address by going to the printer’s Wireless or Network setup menu.
If you don’t see an IP, you may have to restart the printer. In some cases, you may have to remove and re-enable web services to re-establish your connection.
Refer to the FAQ & Help section on HP ePrintCenter for more information on how to remove and re-enable web services from your printer.
Allow your printer enough time to reconnect to your network after you try any of the steps above, before you try ePrint or Print Apps again.
D.     Remove and Re-enable Web Services and Restore Factory Defaults
Remove and then re-enable web services on your printer. If the web services info sheet does not automatically print within a few minutes of re-enabling web services, web services has not been fully enabled on your printer.   You may need to wait and remove and re-enable web services again in few hours to allow the issues affecting your printer’s communication with the cloud servers to clear up. Until a web services info sheet prints out your web services registration is not complete.   Complete the steps below while your printer is connected to the Internet.
Photosmart: The Remove Web Services option is available either under the Setup>Wireless>Web Services menu option, or the Setup>Web option, or via the ePrint icon on the printer front panel.
On the eStation select the Menu button on the eStation display (to the right of the Home and Back buttons at the top left when the display is docked on the printer); Select Settings; Select "Web Services”; Select the “Web Services” checkbox.
Officejet: Use Setup > Web Services Setup > Restore Factory Settings to remove Web Services from the printer.
LaserJet: Print a configuration page from your printer to locate the IP address. Open a Web browser and type the product IP address into the address line. The HP-embedded Web Server will open. Click the HP Web Services tab. Select the option to remove Web Services.
2. Restore Factory Defaults on your device. If removing and re-enabling web services does not resolve the problem, restore factory defaults on your printer and try again. The factory default option is usually found in the Setup>Tools menu on your printer.   Do the following on your device:
Remove/Disable Web Services
Restore factory defaults/settings (depending on the printer this is found under the Setup>Tools menu, or the Setup>Web Services menus, but varies by printer)
If prompted, re-do initial setup of your device and add it to your network
Re-enable Web Services
Once the Web Services information sheet is printed, use the printer claiming code to add your printer to your account on ePrintCenter
E.      Set a Manual IP/DNS Server settings on your printer
Setting a manual IP address/DNS Server on your printer will resolve web services connectivity issues that can occur on some networks with some routers. Note: Setting a manual IP/DNS Server may be particularly helpful on networks using DSL/VIOS routers.
Please read the instructions below completely before applying them. You should not attempt these on your own if you don't understand networking basics. Most of us have a "techie" buddy/friend/family member...if you're not comfortable this might be a good time to call him/her, or contact HP support to assist you.
Before you begin, first remove Web Services from your printer if it has been enabled. (See section D. 1. above.) Removing web services will remove your printer from your HPePrintCenter.com account (if you have previously set up an account and added it). When you re-enable web services after completing these steps you will have a new ePrint email address and need to add your printer to your ePC account again.
How to set a manual IP address/DNS Server on your web-connected printer:
Print a Network Configuration Page from the printer front panel. On some printers this will be under Wireless>Wireless Settings, and on other models use the “Print Report” option from the Wireless status screen accessed from the wireless icon on the printer home screen.   Note the printer's IP address that is listed in the IPv4 section of the report. On most printers you can also see the printer’s IP address from the Wireless menu, or on the Wireless status screen.
Type that IP address into your browser address bar (where you would normally type a web page URL) and hit enter - this will load the printer's internal settings page (also known as an Embedded Web Server, or EWS)
Select the “Network” or “Networking” tab (the label varies depending on printer model) from the tabs along the top of the screen in the EWS
Depending on your printer model, the next step(s) will vary:
Select the “IPv4” option from along the left side of the Networking screen
or
Select the “Networking” option from the left side of the screen
Then select the “Network Address (IP)” option from the left side of the screen
The screen you end up on should be the “IP Address Configuration” screen. That screen allows you to choose an Automatic or Manual (i.e., fixed) IP address for your printer, as well as Subnet Mask and Default Gateway values. You will use this screen to set a Manual IP address and DNS Server for your printer.
To continue:
Select the radio button next to “Manual IP”
Select the “Suggest a Manual IP Address” option below the IP address fields. The Manual IP address fields will automatically populate with suggested values after a few moments.
Select the “Manual DNS Server” radio button in the DNS Address Configuration section
Enter the address just entered in the “Manual Default Gateway” into the “Manual Preferred DNS Server” field. Leave the “Manual Alternate DNS Server” entry blank.
Carefully double-check the values you entered to make sure they are all correct.
Click 'Apply'
Save any open documents and close any web browsers on any computers
Turn off the printer and unplug the router.
Plug in the router, wait for it to start up and for status lights to settle down (approximately a minute at least), then turn on the printer.
After the printer has connected to your network, enable web services on your device, accept any firmware updates that may be offered, and add your printer to your account on HPePrintCenter.
In some cases you might need to add the printer to your computer’s Printer/My Printers folder again, after you set the new manual IP address.   If you have problems printing to your printer, simply use the option to add a printer, select the Networked printer type, and complete the add printer wizard. You will not need to reinstall any printer software on your computer.
F.       Check for port/proxy issues
Note: These issues are not commonly experienced, and primarily affect users in business environments.
ePrint and Print Apps require access to establish connections out to HP servers via ports 80, 443, 5222 and 5223. Primarily in some business environments, network administrators may block devices initiating communication from within the firewall on some of these ports. Please check with your network administrator or Internet Service Provider to make sure those ports are not blocked on your router/firewall for outward-bound communication initiated by your printer.
Important Note: We are not suggesting that you set up port forwarding on your router to open these ports for connections initiated from outside your network to your printer. That is not required and could be a security risk for your network.
2. In some business environments the local network which the printer is connected to may require a proxy setting to access the Internet.   Check with your IT Administrator or Internet Service Provider (ISP) for proxy setting if necessary. Most ISP for home users do not require proxy configuration for Internet access. (Note: HP web connect printers currently do not support secure proxy servers)
To set a proxy on an Officejet All-in-One, see this document: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02524629&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
If the steps above have not resolved your ability to use ePrint/Print Apps, please submit a question in the here in this support forum, confirming you have completed this connectivity troubleshooting and identifying the error/problem you are experiencing. Thank you.
I am an HP employee.
This question was solved.
View Solution.

eprint has to be the biggest boondoggle ever created. HP should be embarrased by their incompeetance - been two weeks and I have not been able to access the feature. Told a number of times (after LONG wait on phone) that there were problems with their servers and to try again in a day or so - very helpful and professional. Feel like I'm dealing with "Dogbert" customer support in Dilbert cartoon world. Can't log on using snapfish or any other means. I guess I just have to give up and recognize that HP just doesn't care - false advertising and promotion. No satisfaction.

New Printer but can't eprint because of snapfish

Hello, I have a similar problem to others here. Purchased a new printer today been trying to set it up for hours. I cannot log into eprint because of an old snapfish account. I have tried two email addresses but have the same problem each time. I have gone to Snapfish to try log in and change passwords etc but it tells me I cannot do that and gives me another link to go to. When I click on that link I end up on Virgin Media's web page ???? what's that all about? I need to cancel the snapfish accounts so that I can start again. Please help.
Thanks

Your best bet will probably be to use snapfish chat support and request to have the account deleted there. If for some reason they mention there is no account on file you can actually create a snapfish account with that email, and then log in with the same information on eprintcenter.com once you are done.
Link to the snapfish contact page: http://support.snapfish.com/app/answers/detail/a_id/669/~/contacting-customer-support
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

IPhoto, Safari and Snapfish

My wife is trying to using Snapfish (www.snapfish.com) to share photos with others. When she trys to upload pictures using the QuickUpload tool Safari says it can't find the plug-in. We keep getting the getting the message:
"The page “Snapfish: Upload Pictures” has content of MIME type “application/x-photocenter-upload”. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed."
Snapfish doesn't provide any help or assistance. Any ideas.
Thank you!

Christopher,
You are right. It's not working. I don't know if it is the site, or Safari that is to blame.
I can tell you that this site does not integrate with iPhoto. You will find it very hard to navigate your iPhoto Library folder in the finder to find the photos you want to upload. You would have to share>export the images to a new folder on your desktop and then upload from that folder. Not a good and easy way to upload.
May I suggest you sign up for a different Online photo gallery site that is better integrated with iPhoto.
Shutterfly has an Smart upload program that you can download. You then drag images from the iPhoto Library into the top window of the smart upload program to upload them.
Flickr has an iPhoto plugin in that works directly with iPhoto.
ClubPhoto has a program available called PictureSync.app (it is actually not affiliated with clubPhoto but works with clubPhoto and other photo sites.You select all the images in iPhoto and run the software.
Good luck and sorry I couldn't help you with Snapfish. You might want to email them and tell them the problem.
You can use PictureSync to directly upload selected images in iPhoto to Flickr, Fotki, Zoto, SmugMug, Vimeo, You Tube, Photobucket, Webshots, 23, Buzznet, Club Photo, Textamerica, Foto Time and Real PhotoVideo.
PictureSync

IPhoto 06 and Snapfish

Is anyone having problems with Intel-based iPhoto 06 and Snapfish, the online photo sharing and printer service?
I was able to download their QuickUpload for Mac tool and get it working with iMac G5. I am unable to get the tool to work with new iMac Intel-based machine.
Is this a difference between PowerPC and Intel software for Mac?

Christopher,
You are right. It's not working. I don't know if it is the site, or Safari that is to blame.
I can tell you that this site does not integrate with iPhoto. You will find it very hard to navigate your iPhoto Library folder in the finder to find the photos you want to upload. You would have to share>export the images to a new folder on your desktop and then upload from that folder. Not a good and easy way to upload.
May I suggest you sign up for a different Online photo gallery site that is better integrated with iPhoto.
Shutterfly has an Smart upload program that you can download. You then drag images from the iPhoto Library into the top window of the smart upload program to upload them.
Flickr has an iPhoto plugin in that works directly with iPhoto.
ClubPhoto has a program available called PictureSync.app (it is actually not affiliated with clubPhoto but works with clubPhoto and other photo sites.You select all the images in iPhoto and run the software.
Good luck and sorry I couldn't help you with Snapfish. You might want to email them and tell them the problem.
You can use PictureSync to directly upload selected images in iPhoto to Flickr, Fotki, Zoto, SmugMug, Vimeo, You Tube, Photobucket, Webshots, 23, Buzznet, Club Photo, Textamerica, Foto Time and Real PhotoVideo.
PictureSync

Why can't I use Snapfish anymore with iPhoto 08? I cannot see the library.

I recently upgraded to iPhoto (iLife 08) now when I try to upload pics to snapfish it cannot see the folder. I know it is there cause I see it in Finder. It shows all other folders but the iPhoto folder is invisible. Does anyone know a setting or a way that I can utilize photo developing other than the proprietary ones for Apple?
Please help. I feel like I've been swindled. (Seems Like something Microsoft would do)
Jeff

Jeff
You haven't been swindled, no one is forcing you to do anything.
With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
It has never been the correct procedure to root through the iPhoto Library Folder - in fact on every version the documentation has expressly stated that you should never do so.
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
All of these are faster and safer than rooting around in the iPhoto Library Folder
You might also check if Snapfish have updated their plug-in for iPhoto yet? If Snapfish haven't bothered to update their plug-in, you might want to check out many of the other services that have. Or are supported by an app like PictureSync. So, nothing proprietary there.
Regards
TD

Dowload pictures from snapfish to iphoto

I am unable to download pictures from the snapfish albums (portrayed as a slideshow) to my iphoto. I am making a
presentation and can not copy them... the only thing I get when I right click is information re adobe

Google found this:
http://support.snapfish.co.uk/app/answers/detail/a_id/2791/brand/81/brand_host/w ww3.snapfish.co.uk/
Regards
TD

How do you send photos from iPad / iPhone to Snapfish for prints?

How can I send photos that areiPad and iPhone directly to snapfish for prints?

I guess that is what it does.
Sorry for the goose chase. For prints, I use the Walgreens app. You can pick them up at a local store, or I think they will mail it to you.

Snapfish App

Similar Messages

Maybe you are looking for