SNMPv3 Traps Nexus and Engine ID

I am trying to configure SNMPv3 TRAPS on Cisco Nexus running 5.2 NxOS. I need to be able to configure an SNMP Engine ID, but the OS appears to only support Engine ID for informs, not traps. Is there a way to configure the engine ID for SNMPv3 TRAPS in Nexus?

The SNMP manager must know the user credentials (authKey/PrivKey) based on the SNMP engineID of the Cisco Nexus 5000 Series switch to authenticate and decrypt the SNMPv3 messages.
You can configure EngineID with individual command or with SNMP v3 user :
Individual:
snmp-server engineID local 123456789012345678901234
SNMP v3 User :
switch(config)# snmp-server user name [auth {md5 | sha} passphrase [auto] [priv [aes-128] passphrase] [engineID id] [localizedkey]]
Example :
snmp-server user NMS auth sha abcd1234 priv abcdefgh engineID 00:00:00:63:00:01:00:a1:ac:15:10:03
The engineID format is a 12-digit colon-separated hexadecimal number.
You can check the existing EngineID using show snmp engineID.
You dont have to bind EngineID with either Trap or Inform as such in configuration, in snmp v3 as it is common configuration for both :
switch(config)# snmp-server host ip-address {traps | informs} version 3 {auth | noauth | priv} username [udp_port number]
The above command configures snmp v3 traps or informs. The username can be any alphanumeric string up to 255 characters. The UDP port number range is from 0 to 65535.
-Thanks
Vinod
**Encourage Contributors. RATE them.**

Similar Messages

LMS 4.2 and SNMPv3 traps

Hello,
Does LMS4.2 or better the DFM of LMSv4.2 support SNMPv3 traps? I read in lms42rel.pdf => In this release, Trap support is provided for SNMPv3 configured devices, SNMPv2 configured devices, unknown devices, and non-Cisco devices.
If yes, do we need to provide the SNMP Engine-IDs of target devices sending traps so that LMS can decrypt the traps or will LMS deploy the Engine-IDs from the poll cache to the DFM trap receiver? If manual Engine-ID maintanance is required, where in LMS can we type in the Engine-ID's?
thx for answers in advance,
Steffen

Seems the SNMP v3 config is not correct.
Please see my comments inline (in bold blue) as per your config, in what i think is incorrect:
snmp-server view LMS iso included     --> correct
snmp-server view LMS ####at excluded     --> dont know if #'s are by mistake
snmp-server view NMS snmpUsmMIB excluded --> Not sure if NMS is typo or you made a new view after LMS.
snmp-server view LMS snmpVacmMIB excluded      --> correct
snmp-server view LMS snmpCommunityMIB excluded     --> correct
snmp-server group LMS v3 priv read v3read write v3write notify LMS `--> Incorrerect, as after read and write you should have a SNMP View which is configured with "snmp-server view" command, which is either LMS or NMS in your case. There is no v3read or v3write configured.
snmp-user LMS LMS v3 auth md5 authPW priv aes 128 privPW      -->Not sure if "snmp-user" is again a typo, else everything is correct.
snmp-server host x.x.x.x traps version 3 priv NMS      --> There is no user as 'NMS'. after priv it should be either "SNMPv1/v2c community string or SNMPv3 user name". I dont see any username as NMS, as per config it should be LMS.
-Thanks

Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

Hi,
So you have N7k acting as L3 with servers connected to 4510?.
Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
This will help narrow down if issue is between server to 4510 or 4510 to N7k.
Thanks,
Nagendra

Delivery Plant and Engineering Change no in BAPI_SALESORDER_CREATEFROMDAT2

Hi Gurus,
My requirement is creating sales order useing BAPI_SALESORDER_CREATEFROMDAT2,
but iam unable to find out Delivery Plant and Engineering Change no. in this BAPI.Plese Help me,
Regards
Srinivas

We use Delivery plant as Shipping point ,it is VBAP-VSTEL Field,you can see Sales order Shipping tab at item level.
Check the sales order level,if coding is good then there may be some user exit to stopping the data .
also check with functional guy to confirm the delivery plant field.
BAPI Structure is
BAPISDITM-SHIP_POINT
Thanks
Seshu

[JClient 9.0.3] Trapping events and canceling actions

Subject: [JClient 9.0.3] Trapping events and canceling actions
I'd like to be able to, based on some condition, abort certain
actions (navigate, delete, insert, etc, etc) when the appropriate
events have been fired.
E.g., in case the Transaction is dirty and when I navigate to a
certain row in a certain ViewObject instance, I would like to
intercept this action and let the user decide what to do:
Commit/Rollback/Cancel. Of cource when 'Cancel' is selected, the
navigation-action should be aborted at all.
I have realised this functionality by subclassing JUNavigationBar
and either calling super's actionPerformed() or not. This works
perfectly, but of course there are other means to navigate (a
JComboBox + NavigationBinding, a JTable or programmatically), so
I would need to implement similar functionality for each of these
component types.
So, what I need to do is to intercept these actions on a lower
level. It appears that I need to register RowSetListeners to
ViewObject instances, but as far as I can tell, this way there
isn't a real way to abort these actions once they are started.
Am I pherhaps overlooking something? Any help and/or suggestions
would be greatly appreciated.
Arno

Subject: [JClient 9.0.3] Trapping events and canceling actions
I'd like to be able to, based on some condition, abort certain
actions (navigate, delete, insert, etc, etc) when the appropriate
events have been fired.
E.g., in case the Transaction is dirty and when I navigate to a
certain row in a certain ViewObject instance, I would like to
intercept this action and let the user decide what to do:
Commit/Rollback/Cancel. Of cource when 'Cancel' is selected, the
navigation-action should be aborted at all.
I have realised this functionality by subclassing JUNavigationBar
and either calling super's actionPerformed() or not. This works
perfectly, but of course there are other means to navigate (a
JComboBox + NavigationBinding, a JTable or programmatically), so
I would need to implement similar functionality for each of these
component types.
So, what I need to do is to intercept these actions on a lower
level. It appears that I need to register RowSetListeners to
ViewObject instances, but as far as I can tell, this way there
isn't a real way to abort these actions once they are started.
Am I pherhaps overlooking something? Any help and/or suggestions
would be greatly appreciated.Yes you're right in saying that there are many ways one could perform navigate - by other controls, by calling next() on the VO or even on the RowSetIterator. Also BC4J does not generate 'events' before navigation to preempt navigation unless a row is 'modified' in which case RowValidation events are generated for the Entities modified in that row.
The most generic way you may fix this is by 'listening' to rowsetiterator's navigation events and get the PreviousRow from the navigation events and set focus back to it if user presses cancel, or get the current RowKey and let the user commit/rollback and then restore the currency to a row with that rowkey (just in case the MT is set to clear all caches on commit/rollback transaction boundaries). Note that insert/delete events should not be handled this way as those event points are usually generated due to a button action and it's easier to preempt these actions rather than 'let the actions' complete and then perform a rollback-to-a-particular-point.
Arno

SAP's Customer Network for R&D and Engineering

Just want to make the PPM folks aware that SAP started the "Customer Network for R&D and Engineering".
See also this post in the [PLM Forum|SAP's Customer Network for R&D and Engineering;.If you are interested to participate in the Network, just drop me a mail with your contact details.
Regards Renato

Dear Phillip,
Cloud enabled software can be easily deployed on-premises but not vice versa.
this could probably be the deciding factory, for every customer : - )
no one would want to block their future...
so even for on-premise, its better to start with cloud and go for hybrid model and i believe
if this lock is there.....
then every on-premise solutions will have a cloud solution.....
want to see your argument on, any one thinking, i want only on-premise, and i will not be needing
cloud solutions in near future..... also for hybrid customers, cloud first and then on-premise would be pain area.

Can i get sample BP80 for Quality,BOM,WIP and Engineering Modules

Can anybody let me know from where i can get the sample BP80 Docs for quality,BOM ,WIP,MRP and Engineering.
I have the templates of BP80 as per AIM Methodology but i need some same docs on the above modules.
Regards,
Bala.

Hi
Please find the link for this as http://www.ziddu.com/downloadfile/1682474/AIMtoolaset.EXE.html
Install this. You will find link in software itself for all templates.
I have quick question for you.
Can you please share your organisation structure format of automotive solution?
Thanks in Advance.
Edited by: user11981009 on 03-Dec-2011 21:18

SNMP Trap modules and env

Hi,
I would like to know what the equivalent command to enable snmp traps module and env in IOS XR.
The IOS command is like below :
snmp-server enable traps module
snmp-server enable traps envmon fan shutdown supply temperature status
i could not find similar command in IOS XR. is it the same with "snmp-server traps system" in IOS XR ?

Hey,
You will need to configure "snmp-server traps sensor" to enable the traps under the CISCO-ENTITY-SENSOR-MIB. You can use the following docs to check whether these are supported on your XR platform.
For ASR9k, (table 3-2 lists the supported Traps on the ASR9k),
http://www.cisco.com/en/US/docs/routers/asr9000/mib/guide/asr9kmib3.html#wp1602338
For the GSR XR,
ftp://ftp.cisco.com/pub/mibs/supportlists/xr12000/xr12000-supportlist.html
For the CRS-1,
ftp://ftp.cisco.com/pub/mibs/supportlists/crs1/crs1-supportlist.html
Thanks and regards,
Rahul.

How to trap opening and closing of adobe print dialog?

I'm working on a asp.net page with dynamically embedded pdf document in it.
I'm using embedded javascript to print the pdf document after a button click and some processing serverside.
As you know print dialog doesn't open immediately and it takes some to open.
And now I'm in a situation where I need to trap opening and closing events of pdf print dialog,
as internet explorer doesn't wait for print dialog to be closed before returning the page control flow to my
script and as a consequence the user will not be aware of opening print dialog and maybe perform other actions
without printing.
Thanks in advance for any HELP!

I'm working on a asp.net page with dynamically embedded pdf document in it.
I'm using embedded javascript to print the pdf document after a button click and some processing serverside.
As you know print dialog doesn't open immediately and it takes some to open.
And now I'm in a situation where I need to trap opening and closing events of pdf print dialog,
as internet explorer doesn't wait for print dialog to be closed before returning the page control flow to my
script and as a consequence the user will not be aware of opening print dialog and maybe perform other actions
without printing.
Thanks in advance for any HELP!

Port channel between Nexus and Server is initializing

Hi all,
I will need your help.
I have Nexus 5000, there is a POrt Channel between Nexus and Server, but one port always is in initializing.
sh interface Ethernet101/1/27
Ethernet101/1/27 is down (initializing)
Hardware: 1000/10000 Ethernet, address: c8f9.f920.5b5c (bia c8f9.f920.5b5c)
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
auto-duplex, 10 Gb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is on
Rate mode is dedicated
Switchport monitor is off
Any idea?
Regards

how many ports are you using in this port channel.
can you paste the configuration of the channel ports and the interface.
check the sh log if you are getting any log related to the port channeling.

How to configure traps when using snmpv3 for Airwave and controller communication

Requirement:
Airwave monitoring or managing controllers, using SNMPv3 for communication.
Solution:
Usage of SNMP v3 for communication over SNMP V2c is increasing rapidly for its enhanced security. Like wise, SNMP v3 informs are also more secured compare to SNMP v2c traps.
SNMP v3 informs work differently, when compared to SNMP v2c traps. As, informs would need a received receipt from the trap receiver. Therefore it requires more configuration from Airwave side as well.
Configuration:
We need to configure the SNMP v3 inform user on Airwave, under device setup --> communication as shown below:
We need to use the same user name to configure on the controller as well, as shown below:
Controller GUI > Configuration > under management > SNMP > Trap recievers:
Verification
After the configuration, we could see the traps(Informs) showing on the Airwave GUI, System --> Syslogs & Traps, as shown below:
We could also see in the packet capture taken from Airwave, that the controller is sending the Traps and Airwave is Acknowledging them as shown below:
In the above example, .116 is the Airwave IP and .231 is the controller IP.

My first question is how to create Sync-Async bridge in XI without using BPM.
Just make a search on SDN, there is blog which mentiones how to do Sync_Async bridge without BPM (for JMS)
"how to route this Interface mapping in Integration directory as in this case there is no backend call....its just the Java
mapping inside an Interface mapping"
Include the Interface mapping in the appropriate Interface Determination in ID for a particular set of source and target.
and third I m trying to call an IDOC which is populated with the response of the Java mapping....but how to route it in
Integration Directory ??
same as mentioned for Q2....in Interface Determination....if it is a Sync call then the Request & Response Mapping will be in same Interface Mapping and then in same Interface Determination......it is the normal way.....I hope that i have not missed/ overlooked something from your queries!
Regards,
Abhishek.

103 movement inspection for spares and engineering materials

can any body tell me how to control engineering and & spares materials when i done GR against 103 movement inspection lot is created but there is no control of goods is keep in quality but system allow 105 movement total quantity also how we will control the quantity if it is in quality stock any settings is required kindly send me guidelines

Hii,
103 movement is GR w.r.t P.O into GR blocked stock. Generally GR blocked stock means keeping the material outside the plant. The stock displayed in GR bloocked does'nt considered into inventory stock.
103 movement will be activated were the stores want to put some Quantity check on the material & where the Purchase dept does'nt want to take any accountability for the supplier deficit stocks. (In 101 immediately accountability take place and reflected in the inventory and FI document gets generated).
In MIGO after 103 movement, user can immediately release stock from GR block stock in the same screen (A05 Release from GR blockd stock). From Quality point of view u need to go with 103-105 movement type. Here don't activate Quality for 103 movement but activate quality for 105 movement type.Bcoz in 103 after inspection, u cannot show defect material in Blocked stock and it will remain in GR blocked stock. Confusion remains between new material and defect material where bothe will remain in GR blocked stock.
In short 103 - Quantity check (stores activty, no Inpsection lot)
105 - Quality check (Quality activity. Inspection lot)
Edited by: Lokesh K on Aug 10, 2010 1:03 PM

Adapter_plain and engine error during test service

Hi All,
Am not able to test the adapter_plain service under default_host->sap->xi. When i do a Test Service i get an Action Cancelled page with the url http://iscsapapp4w:8010/sap/xi/adapter_plain?sap-client=100
I checked the Pipeline URL parameters in SLD for my Integration Server BS, httpport setting in eXhangeProfile and specific confirmations IS_URL parameter in sxmb_adm.
And i get the following error when i Test default_host->sap->xi->engine
Pipeline ID which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=100)

Synchronous RFC
1. CALL FUNCTION func DESTINATION dest
                     parameter_list.
Asynchronous RFC
2. CALL FUNCTION func STARTING NEW TASK task
                [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
                parameter_list
                [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
Transactional RFC
3. CALL FUNCTION func IN BACKGROUND TASK
                     [DESTINATION dest]
                     parameter_list
                     [AS SEPARATE UNIT].
Use help function of your ABAP editor for more details.
Regards
Stefan

Production BOM and Engineering BOM

Dear Gurus ,
I want to know difference between Eng BOM and Prod BOM . We have standard multilevel engineering BOM but if I use that BOM for routing assignment I can only see 1 st level components . Can I put all components in single level so that I can assign them in FG routing and pick list will have all the components ?
We are thinking of considering all assy as phantom so that there would be only one prod order for FG .
Neal

Hi,
The engineering BOM is as designed material BOM. It may include all the part upto the level of nuts & Bolts & also the engineering drawings. But in Production BOM you may not include the engg drawings & the C class material like nut & bolt, which may be planned on Reorder point planning.
I hope the answer is clear.
Regards,
Prashant

A fix for nexus and Chromecast on bt

Been struggling for a few weeks now casting from my nexus to Chromecast via BT but have finally found a solution.
First of all make sure your google play services is the latest addition you can find the latest version here http://www.apk4fun.com/apps/com.google.android.gms/ after installation turn your device off and back on and try to cast if it does not work do the following which worked for me.
First of all install a older version of play services once installed go into your app manager and force stop google play services
Turn of your device and then back on.
Go back to your google play services and restart the play services.
Then go to your Chromecast and start it up, it will tell you that it needs the latest version of play services to work, follow the on screen instructions and let it update.
Once done exit everything and turn the device on and off then reconnect to your Chromecast and you should be good to go.
If not pester google like I did, it has nothing at all to do with the BT home hub all issues are Google's latest updates.

Hey, thanks!
I was having the exact same problems in Final Cut Studio 2
Motion crashes/closes on 'save as' or export.
DVD studio pro crashes on import.
Soundtrack Pro crashes on save as.
Final cut pro 6 was the only one that worked fine. Not sure about LiveType, havn't used that in like 4 years.
JUST A WARNING:
Final Cut Pro X will not open after this fix!
Any ideas of how to get both FCS2 and FCPX working on the same machine in Snow Leopard? I like editing in FCPX (for my needs it's faster) but I still need DVDSP. :/
Any point upgrading to FCS3 or will that crash as well?
---------------Or is there an alternative to DVD SP that's free or not too expensive????------------------
For those that need it, here's the reverse process:
(This worked just fine for me to reverse the process and get FCPX to work again, HOWEVER, I am NOT qualified to give this advice, I am not a programmer or developer! - do the following at your own risk.)
Open Terminal and enter the 4 lines below and press 'enter' after each line:
cd /System/Library/PrivateFrameworks/
sudo mv ProKit.framework "ProKit(SnowLeopard).framework"
sudo mv ProKitFOO.framework ProKit.framework
exit
I hope that's been helpful to someone.
Nitsan.

SNMPv3 Traps Nexus and Engine ID

Similar Messages

Maybe you are looking for