A fix for nexus and Chromecast on bt

Been struggling for a few weeks now casting from my nexus to Chromecast via BT but have finally found a solution.
First of all make sure your google play services is the latest addition you can find the latest version here http://www.apk4fun.com/apps/com.google.android.gms/ after installation turn your device off and back on and try to cast if it does not work do the following which worked for me.
First of all install a older version of play services once installed go into your app manager and force stop google play services
Turn of your device and then back on.
Go back to your google play services and restart the play services.
Then go to your Chromecast and start it up, it will tell you that it needs the latest version of play services to work, follow the on screen instructions and let it update.
Once done exit everything and turn the device on and off then reconnect to your Chromecast and you should be good to go.
If not pester google like I did, it has nothing at all to do with the BT home hub all issues are Google's latest updates.

Hey, thanks!
I was having the exact same problems in Final Cut Studio 2
Motion crashes/closes on 'save as' or export.
DVD studio pro crashes on import.
Soundtrack Pro crashes on save as.
Final cut pro 6 was the only one that worked fine. Not sure about LiveType, havn't used that in like 4 years.
JUST A WARNING:
Final Cut Pro X will not open after this fix!
Any ideas of how to get both FCS2 and FCPX working on the same machine in Snow Leopard? I like editing in FCPX (for my needs it's faster) but I still need DVDSP. :/
Any point upgrading to FCS3 or will that crash as well?
---------------Or is there an alternative to DVD SP that's free or not too expensive????------------------
For those that need it, here's the reverse process:
(This worked just fine for me to reverse the process and get FCPX to work again, HOWEVER, I am NOT qualified to give this advice, I am not a programmer or developer! - do the following at your own risk.)
Open Terminal and enter the 4 lines below and press 'enter' after each line:
cd /System/Library/PrivateFrameworks/
sudo mv ProKit.framework "ProKit(SnowLeopard).framework"
sudo mv ProKitFOO.framework ProKit.framework
exit
I hope that's been helpful to someone.
Nitsan.

Similar Messages

As of today, I can no longer or Excel. I get this message: You can't open the application "Microsoft Excel" because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted 2x

As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.

The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2)

[svn:fx-trunk] 10001: Fix for TextGraphicNode and RichTextNode delegated content property.

Revision: 10001
Author:   [email protected]
Date:     2009-09-03 13:03:50 -0700 (Thu, 03 Sep 2009)
Log Message:
Fix for TextGraphicNode and RichTextNode delegated content property. We used to pick up cdata from before and after the content tags and consider them content, this was wrong and the new line and tabs threw TLF for a loop.
This change will need to be communicated to and integrated with, CoreTech.
QE notes: None
Doc notes: None
Bugs: SDK-22851
Reviewer: Paul
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22851
Modified Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RichTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextGraphicNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXG_v1_0_Handler.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXG_v2_0_Handler.java
Added Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/ContentPropertyNode.j ava

[svn] 4235: Fix for - Links and type information missing for air.update. event events in @event listings

Revision: 4235
Author: [email protected]
Date: 2008-12-04 13:02:39 -0800 (Thu, 04 Dec 2008)
Log Message:
Fix for - Links and type information missing for air.update.event events in @event listings
Also adding support for multiple @event for a method.
QE Notes: None
Doc Notes: None
Bugs: SDK-18319
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18319
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Hi All,
I have sorted out the problem and this is fixed now.
Regards,
Ajay Kunde

[svn:fx-trunk] 8551: Fix for focusSkin and errorSkin to account for bogus bitmap snapshots when objects are 3D transformed .

Revision: 8551
Author:   [email protected]
Date:     2009-07-14 11:31:50 -0700 (Tue, 14 Jul 2009)
Log Message:
Fix for focusSkin and errorSkin to account for bogus bitmap snapshots when objects are 3D transformed.
Bugs: SDK-17766
Reviewer: Glenn
QE Notes: None
Doc Notes: None
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17766
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ErrorSkin.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/FocusSkin.as

[svn:fx-trunk] 12980: Minor fix for SliderBaseAccImpl and SpinnerAccImpl

Revision: 12980
Revision: 12980
Author:   [email protected]
Date:     2009-12-15 17:33:56 -0800 (Tue, 15 Dec 2009)
Log Message:
Minor fix for SliderBaseAccImpl and SpinnerAccImpl
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/SliderBaseAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/SpinnerAccImpl.as

Adobe Flash Player 10 Fix for WinXP and Vista, IE7, IE8, Firefox, ect.(New Fast Fix)

(This is a possible solution for most users) I have found that inside the folder C:\WINDOWS\system32\Macromed\Flash (WinXP Home/Pro) (Computer > C: Drive > Windows > System32 > Macromed > Flash for Vista) there should be a file named FlashUtil10b.exe (IF NOT YOU SHOULD UPDATE AS SPECIFIED!) (or FlashUtil10a.exe or for older versions something similar depending on your version), which is the update utility for flash player. Click on this and if it updates, you will have to restart your computer. This should fix any missing files, and update you to the latest version.
On a side note to all those who read this, I downloaded and installed 5 different times, the same version, from different websites, all for the "new" flash version, and they didn't work (this also included trying to update Shockwave player itself). Apparently, going directly to the website and downloading a new version of Adobe Flash Player, and installing, doesn't uninstall the older version, (though it says it does nor does the uninstaller work directly from the website) nor fixes the problem. I assume they are aware of this problem, because they included this bug fix in revision 10b. This fix should work for those of you whom cannot view/see flash images as well. There also appears to be a bug/reference problem with the installation of IE8 giving the error "Missing Shockwave Decompression XTRA", when trying to play a Shockwave/Flash file, which seems also to affect Firefox and other browsers. It doesn't recognize that the folder or files that it needs in it, exist. I never had his problem before, until IE8 was installed. I checked which version I had in the system32 folder and found this updater built in to Adobe. Version 10a does NOT automatically update, but version 10b includes this fix. I currently had version 10a when I received this error, and began digging for a solution. Doing the update as described above fixed the problem, and updated it to version 10b.
The new flash version 10b has some new features, such as volume control, auto-updating, and several rendering options for those who may have a faster or slower computer/video card.
I found this works great for XP users but unsure of the Vista users. The process is the same for Vista and the update should still work the same, as long as you run it as Administrator, I assume. I have this also posted on wwwdslreports.com at http://www.dslreports.com/forum/r22115254-IE-IE8-and-Adobe-Flash-Question and here http://www.dslreports.com/forum/r22361930-Adobe-Flash-Player-10-Fix-for-WinXP-IE 8-Firefox-ect. It appears to work for everyone so far. I have not heard of any problems from users with this problem running the RC (Release Canidate) for Windows 7 yet.
I hope this works to your benefit.
Please leave a reply to help Adobe and other users know if this fix worked for you or not. If not, please explain what you did, and the effects your seeing, including operating system, site of the flash file trying to view, browser type (ex. IE6, IE7, IE8, Firefox, Opera, ect.), and I will try to help you as best I can.
(I would strongly recommend those not using IE8, or Firefox 3.5, get the updated versions)
If your looking for uninstallers go to this site: http://kb2.adobe.com/cps/141/tn_14157.html
If your looking for a true full install, you can download this developer version for Windows and Mac: http://download.macromedia.com/pub/flashplayer/updaters/10/flash_player_update2_flash10.zi p (44MB) (If you download this, I would recommend you still follow my instructions for the Flash Utility before restarting your computer.)

I would recommend all users having problems try the above solution first.
I have posted this on a couple of websites, and so far it has fixed everyones problems.
Firefox 3.5 Beta 4 has Adobe Flash Player coding built into the browser so that it not only loads faster but works better.
You still need to have the Adobe ActiveX plug-in and Adobe Flash Player for both browsers.
I would also recommend you download Shockwave Player 11.
IE8 has tried this as well, but it still has a couple bugs in it.
If you have IE8 or FireFox 3.5 Beta 4, and you are still having problems, then I recommend that you go to www.windowsupdate.com and get all of the latest updates (including SP3), then try this fix again.
Your auto-updater built into windows (If you even have it on) doesn't always pull down every update available for your computer. It only pulls down the manditory ones.
Sometimes you HAVE to go to the website and manually get them yourself. I recommend when you go to the website, you click on custom install and pick every last one of them to install, which includes, hardware and software fixes for your computer.
What a lot of people don't know is that when you have installed and tried all of the recommended fixes that Adobe gives you, and it still doesn't work, is that you are having registry conflicts within your Operating System (OS ex. WinXP, Vista, Linux, ect.), and that it is not the Adobe software at all.
Those are usually repaired by making sure your computer stays up to date.
The fact is the computer world is changing so rapidly that everyone can't keep up. You have to check for updates weekly.
If you fall behind on those updates, then you start having problems with your computer and/or software.
One problem then can turn into many and people get frustrated when something all the sudden just quits working.
Take a day or two at least once a month, and make sure you update and maintain your computer.
This includes disk defragmenting, disk cleanup, and making sure you have all the lastest updates.
You can get to Disk Defrag, and Disk Cleanup by going to Start, All Programs, Accessories, then to System Tools.
I would do Disk Cleanup first, then Defrag.
I hope you take this advise into consideration, and that it is very helpful for you.
If you find this useful, please come back and reply to this forum, and let everyone know so that others will be encouraged to do this.
Thanks and goodluck, from another user like you.

Fix for Jaggies and Ripples in Ken Burns Photos?

I thought using the Ken Burns effect to render your photos was supposed to be a cure for the jaggies, but I still notice a lot of jaggies and ripples during photo panning and zooming in the finished DVD. Is there a fix for this? Am I overlooking something?
BTW- As recommended, I don't let iMovieHD do the rendering of everything else. I drag the project to iDVD and let it do the job.
One other observation- iMovie08 seems to do a MUCH better job with the Ken Burns effect. Unfortunately, the rest of the movie doesn't seem to be as crisp, and the transitions, effects, etc, in iMovie 08 are more limited. (plus I hate the user interface).

oregonpete wrote:
BTW- As recommended, I don't let iMovieHD do the rendering of everything else. I drag the project to iDVD and let it do the job.
I keep seeing this suggested in thread after thread. However, I'm still a little confused by it. I'm assuming that this suggestion refers to not exporting out or sending to iDVD when FINISHED with iMovie Project.
Because doesn't iMovie do some "rendering" while you're working in it? It "renders" transitions, effects, etc.
I'm assuming that it's just a difference in the context and time of the "rendering" that makes it different, but using the same term confuses me.
If someone could clarify this or explain it in more depth, I would be grateful.

Fix for iTunes and Stuttering Audio Upon Opening Other Programs

This was answered for me in another mega thread, so I thought I would create it's own topic in hopes of helping as many people as possible.
This is a fix for those that have the problem of iTunes 7 working fine alone, but when opening another program such as a game, etc., iTunes 7 begins to stutter and crackle. This fix assumes that otherwise, the program works correctly (gapless, and other issues are not a problem, no blue screens of death, etc.)
First off my machine:
Dell XPS 3.4 ghz Pentium Dual Core
2 Gig RAM
Creative SB X-Fi audio card, latest drivers installed
Observed problem:
Running iTunes 7, audio sounded fine, but opening another program such as UT2004 (first person shooter game) caused iTunes 7 to stutter and crackle.
This was not an issue in iTunes 6.05. I had to upgrade as I just purchased the new Nano.
As an aside, I have another sound card on my computer, an older Layla Echo 24 professional soundcard, drivers are about 3 years old. When selecting this card, this problem does not occur.
The Fix:
Close iTunes 7
Upgrade your sound card drivers (just to eliminate that as an issue)
Upgrade to latest Microsoft direct X version:
http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A -9B6652CD92A3&displaylang=en
Start
Run
Type: dxdiag
Click "sound 1" or similarly named tab
Slide bar to "basic acceleration" (mine was at full, and basic is two clicks to the left)
Exit
Restart iTunes 7, and startup music
Open game, or other program
Your music in iTunes 7 should now be stutter/crackle free
This may not work for everybody, but it worked for me so I thought I would pass this along.
Good luck!
(resisting urge to type some snarky remark to Apple that somehow their programmers are indeed as human as Microsoft programmers)...oops...sorry about that.
Dell XPS Windows XP Creative SB X-FI Audio Card
Dell XPS Windows XP

i was hopeful, but it didn't work. well teh one thing that i had to do diff was the dx updating, WGA doesn't like to work on my system for some unkown reason (yes it was bought at a store) so i found a way around their WGA check for it (i think) the one i got was labeled as dxwebupdate for august 2006. it updated just fine and it looks like it should be the same one as the newest update release microsoft sent out
my system is a home built one and haven't had probs with itunes with any other version, until this one. i'm tempted to just go back to the newest version 6 i have, cause this is rediculous. i can't do anything without it sputtering away at me. i tryed uninstalling it and removing every trace of its exsistance off of the system (including registry) and that didn't work i made sure all numbers were set to the correct values for my sound blaster audigy gamer, i was using some non oem drivers, but switched over just to make sure witht eh newest ones creative had, and it made zero diff.
i'm wondering if it is an issue it is having with sound blaster cards...
well anyways if anyone else has any ideas i would like to hear them

Any fixes for drag and drop not working in WAD with IE9?

I have exactly the same issue as is described in WAD Problem - can't modify and Drag&drop in Web App Designer (WAD) doesn't work but unfortunately I don't have the option of going from IE9 back to IE8. Has anybody found a fix for using drag and drop in WAD with IE9?
Edited by: Jason Muzzy on Jul 22, 2011 1:09 AM

Hi Jason,
Thanks for replying .
But I am facing this isssue in Web Application Designer. The link which I have shared shows the behavious of cursor while dragging and dropping
Drop not allowed ("blocked traffic" sign)
Drill across (arrow pointing to the right)
Drill down (arrow pointing down)
Exchange dimensions (exchange icon)
Add to filter (add icon)
Remove from filter (remove icon)
Reorder list (reorder icon).
This issue I am getting in Web Application Designer itself.In WAD 7.X ANALYSIS TABLE do we have any option from which we can disable drag and drop of cells because it is destroying the view of report output .
In WAD 7.X we have option of Activate Navigation in ANALYSIS TABLE but if we disable this our context will get disable and it shows the default Browser context menu.We have not provided any such options so that its original layout will retain back .
The solution they have mentioned to Disable Drag and Drop is not available in WAD ,its available in Analyzer.
Please let me know if you have found any solution for this.

Will Adobe be applying their Premiere CS6 Sync fix for MP4 and WMV exports to CS5?

I noticed that Adobe FINALLY fixed the sync issue for WMV and H.264 MP4 exports in their latest CS6 release. This is very much overdue. Given that all of us who paid good money for CS5 have had to live with this issue for more than a year, will Adobe be applying the same fix for us?

I also never have had any synch issues with WMV and H.264 MP4 exports (or anything else) in any of the CS versions.
I also have never noticed any posts regarding this as an issue either ...so not sure who ..
...all of us who paid good money for CS5 have had to live with this issue for more than a year
...would include.

Any fix for mms and group messaging on iphone4 ios6

Is there a fix for no mms and no group messaging for iphone 4 with ios 6?

what is there to fix, what problem are you having?

Fix for Weak and Broken Wifi

I ran into an annoying issue when I brought my iPad home to Singapore. It worked great in the U.S. on my LINKSYS WRT54G router (G-only network setup). However, it would intermittently connect and disconnect and eventually refused to connect at all to my home wifi network running on a DLINK DIR-655 extreme wireless N router. First, I updated my router firmware to the latest to no avail. I also tried disabling all the security settings on the router and that also didn't work. When I set the router to wireless N ONLY, then the iPad could connect with full strength. But alas, my 2nd Gen iPod touch began getting the same errors that the iPad previously did. I tried setting the network to G-only, and the iPod touch connected but the iPad would not. Ughhh. So, I tried mixed G and N networks and that didn't seem to work until I locked down the channel width to 20MHz. Now that all that was finally working, I enabled security and locked down the network to WPA2 / AES and everything is finally working properly and securely.
I ran through all the combinations and permutations of settings to find that the main culprit was the need to specify Mixed Mode G+N along with a fixed 20MHz channel width. Not allowing wider channel bandwidth means that my wireless N devices will run a bit slower, but at least everything is talking now and is fast. The range is also very good on all my devices (even the new iPad). I hope that Apple fixes whatever handshaking protocol problem they have in the iPad to allow it to connect more robustly without having to fiddle around with different combinations of wireless settings like I did.
FYI, the DLINK DIR-655 only has a 2.4GHz radio in it, so A networks and dual-band N networks are not possible to create using this hardware. I know that Apple's wireless N gear is using the dual-band specification, so that might have something to do with it. I do hope that these technical details help someone else in the same boat as I was and maybe can give you some ideas on what to tweak to get everything working properly on your own networks with the iPad in the mix. Hopefully, someone can forward this workaround to Apple so that they can further expedite their Wifi fix.

I've been using the 881U without the Sierra Watcher program installed, you can just add the drivers for the card. I'm not sure what the Sierra Watcher adds but the card is terrific.
I have noticed that the speed is only about 1mb down and 300k up which is slower than on my PC notebook. Not sure if this is because of the network or just using it with the Air.
Regards-Michael G.

Fix for Sync and Privacy Mode

I had not had this issue until just last week. After deleting my phone from Sync, re-adding it, and still finding Privacy Mode activated by default, I continued playing with it and found a solution. The problem was not with Sync, but my Galaxy S3. I went into the Bluetooth connection settings. Saw the Paired Devices. I only had one such pair, SYNC. From there, I hit the cog button representing the settings for that connection. Once there, I saw the Profiles fields. There were two: one for Call Audio; and one for Media Audio. By placing a checkmark in the boxes next to each, the auto-Privacy Mode disappeared. It has worked perfectly ever since.

My problem was specific to the Address Book and iPhone syncing. All other aspects of sync worked.
After wasting way too much of my own time trying to fix this issue, I finally gave up and made an appt with the Genius Bar at my nearest Apple Store. It took HOURS. My laptop was taken into the back of the store several times so others could try to help. Finally, after a thorough, one by one plodding of my preferences - the problem was resolved! I do not have details of what was done to it while it was in the back room, but hopefully the Apple Techs share this kind of information with one another so future users can more easily get it fixed.
My advice: IF you are having trouble with your iPhone not being able to sync properly to your Address Book - take it in to an Apple Store! I was told the fix was not something I could have done on my own! Thankfully it is working fine - make that very well - ever since! Thanks you Geniuses - NOW put the information out there so others won't go through so much frustration and aggravation!

A FIX FOR: Slowest and Non-Responding Safari 5.0

A-lot you reporting slowest and non responding Safari 5.0. I had same problem for the last month since the upgrade. After doing a little research yesterday and doing this fix I have found that this has solve my problem. Safari work now better than 4.0 now!
(Close all internet connections and software before starting this fix)
1) Go to your System Preferences / Network settings
2 )Now for both your Ethernet and AirPort Connection or any other type of connection for each go to Advanced Button and open DNS settings.
3)Write down your present DNS Server Number
4) Add the following Public DNS Numbers
208.67.222.222
208.67.220.220
8.8.8.8
8.8.4.4
5) add back to the end of the list your original DNS Server Number
6) Hit "OK" and Apply.
7) Enjoy the new speed of Safari 5.0
Hope this works for you, It did for me!

splendid! i've been so frustrated with safari 5's slowness and failure to completely load pages w/o a refresh each time. i had read about using opendns' and google's dnses (the ones listed in the tip) but never thought to apply them directly in network settings till now, as i had already entered them in my gateway/router (or whatever you call that device that hooks me up to the web). it really does make a world of difference! great tip!

A fix for nexus and Chromecast on bt

Similar Messages

Maybe you are looking for