So I clicked a email that contained a 2 hour lecture on it, and then my screen went black and wont turn on or even connect to my Itunes. What could be wrong?
It was about 30MB, it was loading and then I turned off the screen. A few minutes later I tried turning it back on and it stayed black. I tried connecting it to my Macbook Pro and it says that its receiving a wrong response. What could be wrong?
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
GinaWhat your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac. -
I have a 5 month old iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it.
Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
It sounds like this may have happened...
Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
http://docs.info.apple.com/article.html?artnum=107854 -
I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!
Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao. -
My iphone 5 screen went black and the only thing that works is siri!
I was in the middle of opening up pintrest when my phone screen went black and won't turn back on. The only thing that works is siri... My lock button also doesn't work so I can't manually restart my phone. When I try to restore my phone i have to turn off find my phone but i cant because the screen is black.. Please please please help! I'm a poor college student who cannot afford a new phone
Well, you can't perform a reset then. What happens when you plug the phone into a power source? If nothing, then you'll have to make an appointment at any Apple store. The genius bar will offer you an out of warranty replacement. Cost is US $269.
-
My iPad just died. The gear symbol came up and then the screen went blank (turned off). It was fully charged so that wan't the issue.
That is indicating that the device has gone into recovery mode. Press just the Power button until the red Power Off slider appears and slide to turn it off. Then power it back up to see if it has exited Recovery Mode. If it has, then you should be good to go.
If it has not, then the issue you had that caused the iPad to turn off was one that put your device into Recovery mode requiring that you go through the recovery process (i.e., the reset did not process since the issue required a recovery to resolve). Here is a link that explains what you need to do to get out of Recovery Mode in that case:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
This article tell you how to restore your device using a backup:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
Post back with any questions!
Cheers,
GB -
was trying to send movie by email ipad said file to large do you want to reduce and send, i said ok, hit send, screen went blank and little circle keeps running round and round and wont stop.
how do i fix this and what is going on?"try to restart the iPad, if you can't access mail, try to hold restart by pressing home button and Lock button together."
You should click Reply in the specific message you are responding to. -
Hi, when i was updating my ipod last night i had noticed it had been doing it for a while. I then realised that it had froze so i just thought to restart it. When I did this it restarted normally by having the apple icon appearing, then the screen went white for a few seconds and the ipod then turned off. Before i even touched another button the ipod restarted again and the white screen appeared again and this has been on a continuse loop everytime I touch a button on my ipod since last night. Please tell me that someone knows what to do!!
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
How do I change my phone settings on my iPhone 5 so that when I make a phone call while I am on the phone call my phone stays lit up. It never goes black so I am constantly hitting other buttons while I try to talk like mute or FaceTime or speaker! Please help this is so annoying! It's like all I need to do is fix the settings somehow and I have gone through all of my settings and I can't find where to do this!
Is the phone in a case? Try taking it out of the case. If that doesn't work, then your proximity sensor is broken. You'll need to bring your phone to Apple for evaluation.
-
i realy want it to be fixed its my life
Have you try to:
> Charge your iPod?
> Plug it to your computer?
> Hold the Power button to turn on?
If so and none work, you may need to replace your battery.
iPod Owners
Your one-year warranty includes replacement coverage for a defective battery. You can extend your coverage to two years from the date of your iPod purchase with the AppleCare Protection Pan for iPod. During the plan’s coverage period, Apple will replace the battery if it drops below 50% of its original capacity. If it is out of warranty, Apple offers a battery replacement for $49 (iPod shuffle), $59 (iPod nano and classic), $79 (iPod touch) plus $6.95 shipping, subject to local tax. Apple disposes of your battery in an environmentally friendly manner.
Source: http://www.apple.com/batteries/replacements.html
NOTE: If you do get the battery replaced yourself, becareful when removing the screen because there is a special cable connecting to the iPod itself and the screen and its very fragile. If that break, then you also need to replace the screen as well.
Message was edited by: keeferaf -
I was downloading a Bosesoundtouch update on my iphone. Screen went black and now I cannot see anything.
Any suggestions?try a hard reset, hold the sleep.wake button and the home button down at the same time until the apple logo appears, it generally fixes this issue
-
is there another way to restart?
- After charging for half an hour see if placing the iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Last, make an appointment at the Genius Bar of an Apple store. -
is anyone else experiencing this problem? what do I do to fix it? I can't revert back to 6.... HELP!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
i bought a used 2nd generation ipod touch fully charged dosent work shows a usb cord going up to itunes music symbol please help
The screen is telling you to connect the iPod to your computer with the USB cable and restore via iTunes on the computer.
iTunes: Restoring iOS software -
The description says it all.....my lock button on the top is broken (iPhone 4).....not sure what to do.....any ideas?
Take it in for repair.
Genius reservation http://www.apple.com/retail/geniusbar/
Maybe you are looking for
-
Parallels and disk utility problem
ok i have parallels installed and using the boot camp partition, however the disk utility keeps changing the disk id (e.g. disk2s2) and everytime this has happens I need to edit the pvs file. Now this is a real ball ache. Can anyone tell me if there
-
How to use multiple models in one Function module?
Hi, In my FM i am using 2 models and if i dont completely exit the Function and use the same fm for another query based on another model it is giving error saying invalid type. if iv_type_of_search = 'A'. start the application BT lv_bol_core = cl
-
Execute more than one thing at the same time.
Hey why every time i want to execute more than one thing(create tables) at the same time it say "ORA-00911: invalid character" , i dont wanna execute one thing at a time. check the pic please http://img370.imageshack.us/img370/5120/oraclesw5.jpg but
-
Small problem in Line Display part. Very few line in Code
I wanted to display line graph. I tried to draw the line. But It is not display. Pls. see the code and help to display the line import java.awt.*; import java.awt.event.*; import java.awt.image.*; import java.awt.geom.*; import java.util.*; import ja
-
Query does not exist in the BI System (Object QU ) 0analysis_pattern
I get this message when I validate or load this template. We just installed it. Does anyone know what Item is missing. I have searched OSS and all forums. Thanks Will reward any help.