SO36 Auto forwarding Address

Hi Experts,
     Is there any way or report or FM available to read SO36 Autoforwarding address of all the SAP Users ?
     If it is not maintained properly then workflow notification mails are not going to external email ids.
     If possible how can we mass maintain the SO36 auto forwarding address for all SAP users ?
     Thanks & Regards.
     Naimish.

Dear Anji,
   Thanks for your reply.
   The functions you have specified gives me the address number of that user.
   I want to read email id in forwarding address that is maintained in SO36 for all SAP Users.
   i.e. if my sap User id is NAIMISH , I want to read [email protected] from SO36.
   Naimish.

Similar Messages

Display the auto forward address for all users

Is there a transaction I can execute in ERP that will display the Auto Forward address for all users? I know that SO36 can be used to create an auto forward address for an individual user, however, I would like to list the auto forward address for all users

According to the 2nd article - I've created an empty Company_Phone_Number_Normalization_Rules.txt file and placed it in the Lync file share, in order to avoid any suspicion that the built-in file might be used. I've updated the address book but unfortunately
can't restart the FE services at this time. There's no still no change in the client.
Yet - the problem here is the numbers shown aren't present in the files making up the Lync address book inside the local user's sip profile folder.

Auto forward emails sent to non-exist emails address to specific email

Hi!
i have exchange 2010 i need to make an auto forward or redirect when email sent to my organization with a wrong email address
for example
[email protected] send an email to [email protected] and user X doesn't exist on my domain , i need this message to be redirect automatic to alternate email [email protected]
thanks
Mohamed Azoz

Hi
Maybe you can look at the edge server for doing this if you have one:
http://www.norman.com/uk/business/support/support_articles/not_valid_email_addresses_validated_by_edge_transport_role_in_exchange_2007_2010
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Auto forwarding option for a substitute

Hi ,
Can somebody help me the workflow automatic forwarding option works with substitutes.
USER A is a substitute for for USER B and both users are setup for automatic forwarding
to external outlook e-mail address.
When a workitem sent to USER B , it showed up in USER A inbox.
But the external e-mail sent to only main user ( USER B ) , but not the substitution.
Anybody has a clue about auto forwarding works with substitute ?
Thanks in Advance.

Thanks for your answers...
Outlook/ Substitute setup is working fine ..
both main user and substitute are maintained with external e-mail address and autoforwarding option.
Only main user is receiving e-mail. Substitute is receiving the work item in his inbox..but not outlook mail..
If Is end a work item directly to substitute , he gets the outlook e-mail.

Auto forward My Boss Messages if I am not to or CC

Hii.. Everybody...
My Boss sends me messages on arrival where I'm not there in TO or CC, is there any auto forward option/script available, which can automate my Boss Job.
Regards,
Suman

Hi,
As per the information and details provided by you, to set an auto-forward in Outlook, please follow these steps: -
In Outlook,
File > Rules and Alerts.
From
Email-Rules > New Rules.
Under
Start from a template or from a blank rule, select Check messages when they arrive and click
Next.
You will get a message that says
“This rule will be applied to every message you receive. Is this correct? Select Yes.
Check
forward it to people or distribution list. In the lower pane, click the
people or distribution list or people or public group link.
This will open the
Rule Address windows. You can also just type the full email address in the
“To” field. Select OK and Next when done.
The box to setup exceptions appears. Select any exceptions you would like to apply to this rule and select
Next.
Under
Specify a name for this rule, give your rule a name. Check the box for
Turn on this rule if you would like Outlook to start forwarding messages now. Check
Run this rule now on messages already in Inbox if you would like Outlook to forward everything that is already in your Inbox. Click
Finish and you are done.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Z10 has no auto forwarding function for emails

Unable to do a setting to auto forward emails to other or own email addresses.
Solved!
Go to Solution.

Well, I cannot seem to replicate it...I forwarded, using my Z10, a 37K email to one of my accounts and also cc'd it to two other of my accounts. All received it just fine...no truncation or any problems at all.
So, all I can think is that there's some problem with the services you are using. Maybe your SMTP outbound server is truncating. Maybe the email item is much larger. Maybe the receiving email systems are truncating.
You'd have to do several different controlled tests to try different things to see if you can figure out the pattern to it. I find no public KB articles from BlackBerry with anything about this symptom.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I've set up my Gmail account to auto forward messages to iCloud Mail but message are not being received. Can anyone help?

I've set up my Gmail account to auto forward messages to iCloud Mail but message are not being received in iCloud Mail.
Can anyone help?

Try this out... this worked like a charm:
*On a desktop PC, log into your gmail account.
*Click the gear up in the top right corner > Settings
*Click Accounts
*Under "Change Account Settings", click "Other Goole Account Settings"
*Along the left, click "Security"
*Under 2-step verification, click "Manage your application specific passwords"
*It will ask for your usual gmail account password and take you to a page that says "
Authorized Access to your Google Account
*You will see a box to type in something (I just typed in iPad) then click "Generate Password"
*It will generate a random password for you... you will need this password Once in your iPad....
Now...
*Go to your iPhone Settings>Mail, Contacts, Calendars>Add Account>Google
*Type in your name, your usual gmail email address and for the password, type in that random one generated on your PC
It should work from there, if not follow what is below!
*On a desktop PC, log into your gmail account.
*Click the gear up in the top right corner > Settings
*Click Accounts
*Under "Change Account Settings", click "Other Goole Account Settings"
*Along the left, click "Security"
*Under 2-step verification, click "Manage your application specific passwords"
*It will ask for your usual gmail account password and take you to a page that says "
Authorized Access to your Google Account
*You will see a box to type in something (I just typed in iPad) then click "Generate Password"
*It will generate a random password for you... you will need this password THREE TIMES in your phone or ipad....
Now...
*Go to your iPhone Settings>Mail, Contacts, Calendars>Add Account>Other>add mail account
*Type in your name, your usual gmail email address and for the password, type in that random one generated on your PC
*Next
Incoming Mail Server:
Host Name: imap.gmail.com
User name: (your gmail email address)
Password: TYPE IN THAT RANDOM PASSWORD AGAIN
Outgoing Mail Server:
Host name: smtp.gmal.com
User name (your gmail email address)
Password: TYPE IN THAT RANDOM PASSWORD AGAIN
Done
And allll the emails came rushing in Hope this works for you!

How to do auto-forwarding to gmail

I would like to auto-forward my firefox mail to my gmail account.
Please tell me how

Hmmm, Firefox mail. What is the domain part of your Firefox mail email address? That should indicate which ISP is operating the mail server and enable people to help with settings.

Auto forwarding texts to email

Can I set my Note 3 up to auto forward a copy of all my texts, sent and received, to my email?

Excellent question hezzz! While this is not part of your phone's features, a third party application might be able to do this for you! I recommend doing a search online for Forward SMS to email, or Forward text to email. I'm sure you will find plenty of options. However, you can forward each message individually/manually, the same way you would forward it to another contact in your address book.
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Auto forwarding Mail

When an email is received from a specific, Windoze using, organisation I use Rules to auto-foward it to a number of other recipients.
However, the message changes formats during this process and what was originally a viewable message becomes an .html attachment:
Begin forwarded message:
From: @.police.uk
Date: 18 January 2007 10:37:21 GMT
Subject: HOME WATCH MESSAGE
(then with) mime-attachment.html
the original email looks like
XXXXXX
CRIME RING MESSAGE FOR WATCH SCHEME CO-ORDINATORS IN *
Please pass on to your scheme members, where appropriate
There has been a bogus official burglary on the afternoon of Wednesday 17 January, the victim being an 86 year old female. The offender gained entry to secure communal area in sheltered housing at *, and knocks on door of victim, posing as a Waterboard official and saying he was checking water pressure in the area. There was also a similar attempted bogus crime at the same address. Please remind your members that * never make unscheduled visits to check water for any reason, visits to households are always by appointment. Any without an appointment should be refused entry. To check authenticity of doorstep callers, please note following numbers:
(removed)
End of message, thank you.
Where I have put XXXX is a logo but it didn't copy/paste from the email.
So, what am I doing wrong? how can I get the message auto-forwarded in all its full glory?
Thanks.
700MHz CRT PowerPC G3 iMac slot-loading CD-R/W Mac OS X (10.4.8) 1GB Crucial RAM

I’d try reducing as much as possible the alterations that Mail makes to the original message when forwarding it.
One thing to try would be turning OFF Preferences > Composing > Increase quote level.
Another would be using Redirect instead of Forward. Beware, however, that doing that may cause the rule to stop working for no apparent reason. Take a look at the following thread for a recent discussion of this issue:
Re: Redirecting multiple mail messages?

IMS 5.2 Auto forwarding

Hi,
We are an ISP,usinng IMS 5.2 patch 1.We are using the Auto-forwarding option for some Users.Whats happening is our domain is abc.com
If external mails(yahoo or rediff) are sent to particular uid say [email protected], forwarding works for that ID within abc.com
rediff/yahoo account ------->[email protected] ----->forwards mail to [email protected]
If the forwarded address is [email protected] or [email protected] and if any mail is sent to that forwarded address from yahoo/Rediff, mail is not getting delivered.
Kindly throw some light on this
Thanks & Regards.

On the info-ims list there was a discussion about this something like this which is right up your alley.
Use a special feature for "designating an alternate processing channel". It does not use rewrite rules, it gets activated via the CONVERSIONS mapping table in your msg-instance/imta/config/mappings file. The table entry looks like:
[br]
CONVERSIONS
[P]
[nbsp;]in-chan=custom;out-chan=*;Convert[nbsp;][nbsp;][&nbsp]No
[nbsp;]in-chan=*;out-chan=bar;Convert[nbsp;][nbsp;][&nbsp]YES,Channel=custom
[p]
The info-ims mailing list is at http://www.arnold.com/info-ims.htmlx

Firefox would take me to yahoo but now it says sorry gone the requested resource is no longer available on this server and there is no forwarding address.

When I click on my Firefox Icon instead of yahoo coming up I get a page that says 410 Gone. Sorry Gone The requested resource is no longer available on this server and there is no forwarding address. Please remove all references to this resource. Please check the URL for proper spelling and capitalization. If you're having trouble locating a destination on yahoo try visiting the "Yahoo home page" or look through a list of Yahoo's online services. Also you may find what you're looking for if you try searching below (it gives a search box). Below the box it says Please try Yahoo Help Central if you need more assistance. If I click on the words Yahoo Home Page it will them take me to the yahoo home page which is used to do my my just clicking on my Firefox Icon. I would appreciate any help someone could give me. I have removed Firefox from my computer and re-downloaded it with the yahoo download but still get the same screen when I click in the Firefox Icon.

I just wanted to say thank you to the-edmeister. Your response corrected my problem. Thank you I appreciate it.

About notification and auto forward

Hi all,
i'm new on nw-bpm
1. (send a message to let the requester know if the task has finished successfully in the end)
Could BPM use u201CNotification" tab in UWL?
if yes, which element should i choose in process composer of NWDS?
or i have to do some coding to send one "Notification"?
2. Could i set auto forward to make my SMTP mailbox receive the Notification at the same time?
Thanks and Best regards,
Fisher

Hi Fisher,
1. BPM doesn't support UWL Notifications so far. What you could do is implementing a Web Service which creates UWL Notifications via UWL API ([Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/802bfda2-8a85-2b10-9290-d67da32d0c01?quicklink=index&overridelayout=true]).
2. You could use static notifications to send eMails to potential owners of a task [Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd5f0c-74ab-2c10-f79e-98d7869db972?quicklink=index&overridelayout=true]
Best Regards
Andreas

Populating Outlook 2013 auto-complete addresses via PowerShell

Hello,
I would like to use PowerShell to add auto-complete e-mail addressees to Microsoft Office Outlook
2013. My understanding is that since Outlook 2010 was released, the NK2 file has been retired in favor of integrating the auto-complete addresses with the PST file (see link below). With that in mind, how can I manipulate the PST file to accommodate
the auto-completion? Is there any documentation on the PST file structure that would allow me to inject this information into an existing PST? If a user has multiple PST files, how do you know which one contains the auto-complete entries — are they aggregated?
http://social.technet.microsoft.com/Forums/office/en-US/f1edb3db-e28c-404b-8817-a3c001555b2d/missing-nk2-file
Cheers,
Trevor Sullivan
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter Profile

"The NK2 file has been retired in favor of integrating the auto-complete addresses with the PST file"
- I think this discription is not exactly.
In fact, Outlook 2010/2013 reads the autocomplete stream
from a message in the Associated Contents table of the Inbox of the mail account’s delivery store. (In another word, it is stored in mailbox site but is not on local). This
hidden message has a message class and subject of IPM.Configuration.Autocomplete. The autocomplete stream is stored on this message in the PR_ROAMING_BINARYSTREAM property (PidTagRoamingBinary
Canonical Property).
Go back to your quesion, the autocomplete data, whatever belongs which mail account’s delivery store, is temporarily cached in an autocomplete .dat file located in %USERPROFILE%\AppData\Local\Microsoft\Outlook\RoamCache.
More Reference:
http://msdn.microsoft.com/en-us/library/office/ff625288.aspx
An useful tool - NK2Edit to
http://www.nirsoft.net/utils/outlook_nk2_edit.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Exchange Server 2013 / Outlook 2010 Auto-Complete address problems

Hi
We run an Exchange 2013 environment where end users use Outlook 2010.
For some reason several users (at least 5 so far, maybe more that haven't noticed yet) are complaining that they are now unable to add any additional address to the Auto-Complete cache. This can be resolved manually by emptying the cache from within
Outlook then disabling and re-enabling auto-complete but obviously they then have a blank slate.
My question is - is there anything that can cause this type of problem collectively? I have seen it previously, but occurrences have always been isolated to an individual user.
Thanks in advance
M

Hello,
You can try use NK2View tool to modify your Outlook Auto Complete Addresses.
With NK2View you can delete unwanted email addresses from your autocomplete file and add new addresses from your address book as well as edit current email address entries. And NK2View is a free download from NirSoft and you can get the software by going
to their website.
Besides, the auto-complete cache is a outlook feature, I recommend you post your issue to outlook forum.
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

SO36 Auto forwarding Address

Similar Messages

Maybe you are looking for