About notification and auto forward

Hi all,
i'm new on nw-bpm
1. (send a message to let the requester know if the task has finished successfully in the end)
Could BPM use u201CNotification" tab in UWL?
if yes, which element should i choose in process composer of NWDS?
or i have to do some coding to send one "Notification"?
2. Could i set auto forward to make my SMTP mailbox receive the Notification at the same time?
Thanks and Best regards,
Fisher

Hi Fisher,
1. BPM doesn't support UWL Notifications so far. What you could do is implementing a Web Service which creates UWL Notifications via UWL API ([Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/802bfda2-8a85-2b10-9290-d67da32d0c01?quicklink=index&overridelayout=true]).
2. You could use static notifications to send eMails to potential owners of a task [Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd5f0c-74ab-2c10-f79e-98d7869db972?quicklink=index&overridelayout=true]
Best Regards
Andreas

Similar Messages

Notifications and auto-start for Droplets ?

there is no way to set a notification when a batch is done... it can be done in Compressor by selecting an action and running a workflow... which is cumbersome by the way, I mean, can't we just get a notification center alert automatically ? ... in droplets there is no way to notify when a batch is finished.. in droplets there should also be an option to start batch automatically, without having to see the droplet window and clicking on "Start Batch"..

We are all hoping that Notifications support is added to Compressor in an update soon, it is not yet supported as it is in FCPX. Fill out the feedback form and request it.
http://www.apple.com/feedback/compressor.html

Verification on the asa 8.4 5505 about PAT and port forwarding.

hi all
ihae topology as blow :
inside------------eth0/1-------asa---eth0/7---------outside-------------------internet
my goal is
i want to make pat of inside network (10.66.12.0/24) with outside interface when it request the internet
also ,
i need port forwaridng to following hosts :
10.66.12.122 to 3389
10.66.12.249 to http
10.66.12.249 to https
10.66.12.249 to citrix
=============================================================
just m i need somebody to check my config it is correct
=============================================================
i have asda 5505 with :
ASAAAAA(config)# sh version
Cisco Adaptive Security Appliance Software Version 8.4(2)
Device Manager Version 6.4(5)
Compiled on Wed 15-Jun-11 18:17 by builders
System image file is "disk0:/asa842-k8.bin"
Config file at boot was "startup-config"
ASAAAAA up 1 hour 32 mins
Hardware:   ASA5505, 512 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode        : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode     : CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.06
                             Number of accelerators: 1
0: Int: Internal-Data0/0    : address is d48c.b597.ce35, irq 11
1: Ext: Ethernet0/0         : address is d48c.b597.ce2d, irq 255
2: Ext: Ethernet0/1         : address is d48c.b597.ce2e, irq 255
3: Ext: Ethernet0/2         : address is d48c.b597.ce2f, irq 255
4: Ext: Ethernet0/3         : address is d48c.b597.ce30, irq 255
5: Ext: Ethernet0/4         : address is d48c.b597.ce31, irq 255
6: Ext: Ethernet0/5         : address is d48c.b597.ce32, irq 255
7: Ext: Ethernet0/6         : address is d48c.b597.ce33, irq 255
8: Ext: Ethernet0/7         : address is d48c.b597.ce34, irq 255
9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
10: Int: Not used            : irq 255
11: Int: Not used            : irq 255
Licensed features for this platform:
Maximum Physical Interfaces       : 8              perpetual
VLANs                             : 3              DMZ Restricted
Dual ISPs                         : Disabled       perpetual
VLAN Trunk Ports                  : 0              perpetual
Inside Hosts                      : 50             perpetual
Failover                          : Disabled       perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 10             perpetual
Total VPN Peers                   : 25             perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has a Base license.
Serial Number: JMX162740GP
Running Permanent Activation Key: 0x6801f547 0xe81c57c4 0x20f339f4 0xaaf48040 0x
480e2fbc
Configuration register is 0x100003
Configuration last modified by enable_15 at 23:58:15.999 UTC Wed Jan 22 2014
ASAAAAA(config)# sh run
: Saved
ASA Version 8.4(2)
hostname ASAAAAA
enable password ffffCCSH encrypted
passwd 2KFfffff2KYOU encrypted
names
interface Ethernet0/0
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 2
interface Vlan1
nameif ins
security-level 100
ip address 10.66.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 50
ip address x.x.55.34 255.255.255.248
boot system disk0:/asa842-k8.bin
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network localsubnet
subnet 10.66.12.0 255.255.255.0
description localsubnet
object network HTTP-Host
host 10.66.12.249
description web server
object network HTTPS-HOST
host 10.66.12.249
description Https
object network RDP-Host
host 10.66.12.122
description RDP host
object network citrix-host
host 10.66.12.249
description citrix
object service rdp
service tcp destination eq 3389
object service https
service tcp destination eq https
object service citrix
service tcp destination eq 2598
object service http
service tcp destination eq www
object-group network RDP-REDIRECT
object-group network HTTP-REDIRECT
object-group network HTTPS-REDIRECT
object-group network CITRIX-ICA-HDX-REDIRECTION
object-group network CITRIX-ICA-SESSION-RELIABILITY-REDIRECTION
object-group service CITRIX-ICA-HDX
object-group service CITRIX-SR
object-group service RDP
object-group network MY-insideNET
network-object 10.66.12.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object object citrix
service-object object http
service-object object https
service-object object rdp
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 a
ny interface outside
pager lines 24
mtu ins 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
nat (ins,outside) source static RDP-Host interface service rdp rdp
nat (ins,outside) source static HTTP-Host interface service http http
nat (ins,outside) source static citrix-host interface service citrix citrix
object network obj_any
nat (ins,outside) dynamic obj-0.0.0.0
object network localsubnet
nat (ins,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.55.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 10.66.12.0 255.255.255.0 ins
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
    308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
    0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
    30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
    13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
    0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
    20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
    65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
    65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
    30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
    30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
    496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
    74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
    68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
    3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
    63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
    0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
    a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
    9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
    7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
    15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
    63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
    18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
    4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
    81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
    db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
    7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
    ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
    45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
    2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
    1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
    03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
    69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
    02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
    6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
    c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
    69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
    1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
    481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
    b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
    5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
    6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
    6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username ADMIN password 5iEuCUW0P3ThngqY encrypted privilege 15
username cisco password eT0.bmvcLOAQcNEL encrypted privilege 15
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:65c9b8c35749959d1159e162ff106166
: end
=======================================================
i configured PAT , PORTFORWARD and ACCESS RULES
just want to mae verification to my work
regards

Hi,
Dont think I can really give you an answer but thought I'd write anyway.
It does seem on the basis of the documentation of the ASA (8.4) that with Twice NAT you wont be able to do any modifications to the DNS replies.
Heres one quote from Configuration Guide
Gonfiguring Network Address Translation -> Information About NAT -> DNS and NAT
If you configure a twice NAT rule, you cannot configure DNS modification if you specify the sourceaddress as well as the destination address. These kinds of rules can potentially have a differenttranslation for a single address when going to A vs. B. Therefore, the ASA cannot accurately match theIP address inside the DNS reply to the correct twice NAT rule; the DNS reply does not containinformation about which source/destination address combination was in the packet that prompted theDNS request.
So if I'm not totally wrong I guess your options might be to either
Start doing changes to the local DNS server directly?
Separate the remote overlapping network from your current firewall with another firewall device?
I dont know the whole setup so this might be impossible
Thinking that if the NAT for the remote overlapping network was done on another firewall it could do the DNS reply changes before they arrived on your ASA from the remote DNS server?
I have not really had to tackle such a situation before. I most commonly run into situations where a customer has public IP configured with 1:1 Static NAT and there is no DNS parameter in the Static NAT configuration while the customer tries to use the DNS name to connect to their local server.
Just some of my thoughts. Maybe someone else might have more expirience with same type of situations.
- Jouni

Click to continue and auto-forward functionality

I want to have slides in my captivate movie that have a
clickbox where if the user does not click to continue after a
certain period of time the movie continues to the next slide. Any
thoughtson how to do that?

Question is duplicated. Original thread is
here

I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data

I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data

Yes, you can do all of that via Tools - Forms - More Form Options - Import Data, if you have Acrobat.
If you only have the free Reader then you can still do it, but it requires a script.

Question about HP 2311xi - auto-switch source and delay wakeup from sleep

I recently purchased this monitor and noticed that when it wakes from sleep it will take about 5-10 seconds for it to wake whereas other monitors I've owned they have gone on immediately. I was just wondering if this is how this monitor is or if I have an issue with it.
Secondly, how is the auto-switch source suppose to work? I have my PC set to DVI and I have the default source set to my 360 through the HDMI connection. I would assume that when the 360 goes on it would go to the default source and switch over to the hdmi connection. However, my monitor does nothing. What does the auto-switch source actually do or is mine just defective?
Thanks in advance for any help on this monitor.
This question was solved.
View Solution.

Auto-switch source only works if there is no signal as it detects the port with a signal and auto switches to that port. However, the monitor has no way of knowing exactly which port the user wants when two signals are present.
Default port setting is what the monitor will look for first when being turned on and doesn't necessarily give that port override capabilities.
Taking 5-10 seconds can be normal. My third-party monitor at home generally takes about 5 seconds before displaying a signal, but this may have more to do with the HDMI connection (I haven't tested this with the VGA port). I don't believe this is a cause for concern.
Let me know if I answered your questions.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Exchange 2010 SP3 and meeting forward notification options

I'm having an issue with meeting forward notifications in Exchange 2010 SP3. I'm working on an integration project with an existing system using the EWS Managed API. Part of this system is handling forward notifications and responses. However, we've hit
an issue regarding the way forwards are generated by Exchange.
In short, when a meeting request is forwarded to an external address (could be an Exchange server outside of our domain, gmail, or anything, really), the notification they receive places the meeting owner in the "sent representing" field, not the
person who actually sent the forward. As a result, any responses from the forward recipient will go directly back to the organizer, and the user who forwarded the request may not even be visible. We do not want this to happen. We'd prefer that the forward
show the person who actually sent it as the sender, and as a result, the response should go directly back to them, not the organizer.
Is this possible, either through settings or flags on the Appointment object itself or through some additional configuration options in Exchange? Installing a third-party transport agent (even one that we write) is probably out of the question.

What if you "Forward as iCalendar"
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on www.exchangequery.com

Confused about the use of TONE and AUTO buttons

After moving an image from Library module to Develop moddule (in LR4) , I open the basic panel. In the basic panel, I see two text buttons: TONE and AUTO. The AUTO button seems to be the default setting. I could re-adjusst the tones as it requires. I have no problem with the ATTO button.
When I press the AUTO button, the TONE button is activated. Then, colors and tones changed immediately. When I move one of the tonal sliders (e.g., Exposrure), it activates the AUTO button. I thought that the TONE button was intended to use for manual tonal change. I am confused. What is the TONE button for?

hummer,
Tone isn't a button, it's just a label.
When you push the Auto button, it becomes de-activated because the tone sliders have been moved to where Auto thinks they ought to be. When you then move one of the sliders, the button becomes activated again because the sliders are no longer where Auto wants them, and you can push it again to take the sliders back to where it put them the first time.
Hal

Auto Quality Notification and Return Delivery Via Usage Decision

Hello Gurus
Need help !
I am using the Quality inspection with Material Specification.
Just an overview of my current system settings -
Inspection Type 101 for Purchased parts , My Inspection characteristics and Batch Charracteristics are linked .Batch classification is updated as a result of Usage Deceision
My Requirement -
If the Inspection lot is getting rejected , system should trigger the Quality notification and return delievery automatically .
Can someone pl help me with detailed steps for acheiving this...
Reqward points will be given immediatly for sharing thoughts
BR

Hi
Thanks for reply.
I think I missed some thing in my question
I understand that this is Standard Sap when you post the stock into Return Deilivery stock , it 'll do the movement type 122 and create the material docuement.
However My requiremnet is to get the Delivery Document number with the reference of which i can do the PGI .
I gone thru the SAP help and learnt that we can trigger the Quality notification automatically if we reject the inspection lot...But not confident "how" as never done before..that the reason i posted my query if someone has done this before..
OR
Any option to create Delivery Document when rejecting one Inspection Lot is UD..W/o Notification also will work for me..
So I am aiming to get Delivery Document not material document as our materials are WM managed...
Could some one put some light on this...
BR

S603rd email : auto notification vs. auto retrieva...

well, it seems that lots of people have asked about these features and many have attempted to answer, but as of yet i cannot find a single, coherent description that agrees with empirical testing.
background:
i'm using the built in mail client on a nokia n95. after setting up a mail account, consider the two options for automatically alerting the user to new emails: Notification, or Retrieval.
RETRIEVAL is pretty straight forward. this works fine on both IMAP and POP3 accounts, and simply sets up the device to poll for emails now and then. this is JUST like a desktop mail client.
NOTIFICATION, on the other hand, seems to be an implementation of either IMAP IDLE or OMA EMN. which is it?
many people have noted that the n-series devices are not intended to replace other devices that provide push email. email notification, however, appears to do just that - though in a broken sort of way.
i have been able to successfully receive push email for a short period of time using NOTIFICATION. this is how it seems to work for me:
1. it only works with IMAP accounts, so far as i can tell - and obviously i've turned on email notification (i Auto-Update, not "only in home network")
2. it may require that your IMAP server supports IMAP IDLE or OMA EMN - or possible some other protocol?
3. i connect to my account, which retrieves headers for new mails
4. i exit my mail application
5. i wait a few seconds for the packet connection to drop, then wait a couple minutes longer for good measure
6. i use gmail on my laptop to send an email to the account used on my n95
7. within a minute my n95 beeps and i see a notification that i've got "1 new email" on my standby screen (it's a popup, like you get for new SMS messages)
8. i click "show" or open messaging and i see that i've received an email header without connecting manually to my mail account.
9. a second mail sent to the account used by my n95 does nothing - push email only works for the first notification, and only works if there is a new email within about 30 minutes of step #4.
can anyone explain this to me? it's possible that having another mail client connected to my imap account will prevent mail notification as well, so if you try testing it, try the test without another client connected.
i've seen some comments online regarding a WAP push notification...perhaps this is also operator specific? i am using AT&T in MA, USA.
does anyone have any information regarding how email notification is supposed to work? what specs were (at least attempted to be) followed when implementing email notification on this mail client?
nokia reps out there - is there a reason why this feature is so ambiguously described? perhaps it's an incomplete feature?
anyone with some time on their hands able to verify my findings?
i look forward to your responses,
-jared
N95-1 ---> N97-NAM ---> N900 ---> E7-00 + N900 (I use them both)
(N95 was pretty good, N97 had potential but utterly failed to deliver, N900 is absurdly good. Those of you wondering, "should I try N900/Maemo/MeeGo"? The answer is a resounding YES)

Maybe you can check the post :
/discussions/board/message?board.id=messaging&message.id=7080&query.id=297096#M7080
It mentioned about (by karkowski)
The problem can be each time manually solved as follows:
The automatic email retrieval must be switched off completely (and the email application closed), and then turned on again. After that the notifications are back. Till the next switch-off...

Replying to email from Notification Centre auto CC's me

Every time I reply to an email from the pop up in notification centre (Mavericks), mail auto CC's me (I have to manually delete it before I hit send). I have set preferences to NOT CC me when I reply. Anyway to fix this?

Frank thanks for bringing this post back up. I thought for sure it would go unnoticed. It seems to me that there is currently nothing the Geniuses can do about it - and because they claim it's an Android issue I doubt this will be addressed in the next iOS. Unless Android sends an update to their users fixing the problem - if it is an Android problem after all - then it looks like we are left to finding a solution on our own. Like I said previously, the only workaround I found is by "forwarding" the email and then manually entering the sender's address.

Auto forwarding option for a substitute

Hi ,
Can somebody help me the workflow automatic forwarding option works with substitutes.
USER A is a substitute for for USER B and both users are setup for automatic forwarding
to external outlook e-mail address.
When a workitem sent to USER B , it showed up in USER A inbox.
But the external e-mail sent to only main user ( USER B ) , but not the substitution.
Anybody has a clue about auto forwarding works with substitute ?
Thanks in Advance.

Thanks for your answers...
Outlook/ Substitute setup is working fine ..
both main user and substitute are maintained with external e-mail address and autoforwarding option.
Only main user is receiving e-mail. Substitute is receiving the work item in his inbox..but not outlook mail..
If Is end a work item directly to substitute , he gets the outlook e-mail.

Z10 has no auto forwarding function for emails

Unable to do a setting to auto forward emails to other or own email addresses.
Solved!
Go to Solution.

Well, I cannot seem to replicate it...I forwarded, using my Z10, a 37K email to one of my accounts and also cc'd it to two other of my accounts. All received it just fine...no truncation or any problems at all.
So, all I can think is that there's some problem with the services you are using. Maybe your SMTP outbound server is truncating. Maybe the email item is much larger. Maybe the receiving email systems are truncating.
You'd have to do several different controlled tests to try different things to see if you can figure out the pattern to it. I find no public KB articles from BlackBerry with anything about this symptom.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IMS 5.2 Auto forwarding

Hi,
We are an ISP,usinng IMS 5.2 patch 1.We are using the Auto-forwarding option for some Users.Whats happening is our domain is abc.com
If external mails(yahoo or rediff) are sent to particular uid say [email protected], forwarding works for that ID within abc.com
rediff/yahoo account ------->[email protected] ----->forwards mail to [email protected]
If the forwarded address is [email protected] or [email protected] and if any mail is sent to that forwarded address from yahoo/Rediff, mail is not getting delivered.
Kindly throw some light on this
Thanks & Regards.

On the info-ims list there was a discussion about this something like this which is right up your alley.
Use a special feature for "designating an alternate processing channel". It does not use rewrite rules, it gets activated via the CONVERSIONS mapping table in your msg-instance/imta/config/mappings file. The table entry looks like:
[br]
CONVERSIONS
[P]
[nbsp;]in-chan=custom;out-chan=*;Convert[nbsp;][nbsp;][&nbsp]No
[nbsp;]in-chan=*;out-chan=bar;Convert[nbsp;][nbsp;][&nbsp]YES,Channel=custom
[p]
The info-ims mailing list is at http://www.arnold.com/info-ims.htmlx

Email notifications and load balancing

We are load balancing 2 OMS's. The problem is email notifications have embedded links that have the OMS that sent the notification instead of the virtual hostname set-up for the load balancer. The OMS's have been set-up to use the load balancer per the OEM Advanced Configuration and from an agent/Web console perspective, everything is working fine and using the load balanced hostname. Does anyone know where to modify the email notifications so the links point to the load balanced URL rather then the individual OMS host that sent the notification?

Thanks, but I was actually asking about the links that OEM has in the email content sent out as part of a notification. (So you can click the link in the notification and it takes you to the appropriate spot in the Grid console). I've since heard from Oracle support that modifying these embedded links to use the load balanced hostname (rather than the individual OMS hostname) is not possible and is something they say they're working on for 11g.

About notification and auto forward

Similar Messages

Maybe you are looking for