SOAP to SOAP BPM scenario

Hi Experts,
Could you please tell me, how to do SOAP to SOAP scenario using BPM?
SOAP -> XI -> BPM ( Inside BPM two more SOAP Adapter call) -> SOAP.
1. Pass the request thro' SOAP to BPM
2. Call first SOAP Adpter.
3. Response of the first SOAP will be the input for the next SOAP adapter
4. Call second SOAP adapter.
5. Return the SOAP response
Regards
Sara
Message was edited by:
Sara D

Message Interface
1. MI_SEND_SOAP_OUT           - (Out,Asyn : MT_BPM_SOAPRequest)
2. MI_SEND_SOAP_IN          - (In, Asyn : MT_BPM_SOAPResponse)
3. MI_BPM_Req_ABS_OUT          - (Abs,Asyn : MT_BPM_Receiver_SOAPRequest)
4. MI_BPM_Req_ABS_IN          - (Abs,Asyn : MT_BPM_Receiver_SOAPResponse)
5. MI_WS1_Service_ABS          - (Abs, Synch : OutMessage : MT_BPM_WS1_Request InMessage:MT_BPM_WS1_Response)
6. MI_WS2_Service_ABS          - (Abs, Synch : OutMessage : MT_BPM_WS2_Request InMessage:MT_BPM_WS2_Response)
Message Mapping
1. MM_BPM_SOAPRequest_To_BPM_RecSOAPRequest ( Source: MT_BPM_SOAPRequest Target :MT_BPM_Receiver_SOAPRequest)
2. MM_BPM_RecSOAPRequest_To_BPM_WS1Request ( Source: MT_BPM_Receiver_SOAPRequest Target :MT_BPM_WS1_Request)
3. MM_BPM_WS1Response_To_BPM_WS2Request     ( Source: MT_BPM_WS1_Response Target :MT_BPM_WS2_Request)
4. MM_BPM_WS2Response_To_BPM_RecSOAPResponse( Source: MT_BPM_WS2_Response Target :MT_BPM_Receiver_SOAPResponse)
5. MM_BPM_RecSOAPResponse_To_BPM_SOAPResponse( Source: MT_BPM_Receiver_SOAPRespons Target :MT_BPM_SOAPResponse)
Could you please tell me, whether the above objects are correct for this scenario?
Regards
Sara
Regards
Sara
Message was edited by:
        Sara D
Message was edited by:
        Sara D

Similar Messages

SOAP - SOAP - SOAP BPM scenario

Hi Experts,
Could you please give me the BPM steps to do SOAP -> SOAP -> SOAP sync scenario.?
1. SOAP1 main service
2. Inside BPM call SOAP2 service.
3. Response of the SOAP2 will be the request to SOAP3 service.
4. Return the SOAP3 response to SOAP1.
Steps inside BPM:
1. Receive Sync Step -> Receive the SOAP1 request.
2. Transform Step -> Map SOAP1 request to SOAP2 request
3. Send sync Step -> Send SOAP2 request and get the response
4. Transform Step -> Map SOAP2 response with SOAP3 request
5. Send sync Step -> Send SOAP3 request and get the response
6. Send Step -> Send SOAP3 response to SOAP1
Do we need to add transformation step in 6th step?
Is the above approach correct?
Only the tranformation step's mapping is enough know?
Please share your suggestions..
Regards
Sara

Hi,
Yes you will have to create a Outbound message Interface for SOAP1 as we have to receive it from the XYZ system into BPM.
As it was stated by you that :
"1. Receive Sync Step -> Receive the SOAP1 request.
2. Transform Step -> Map SOAP1 request to SOAP2 request
3. Send sync Step -> Send SOAP2 request and get the response"
I do not find any need to create the Message Interface as Synchronous(as you dont seem to receive a response for SOAP1). If you need to get a response for SOAP1 and then map the response to SOAP2 then you may need Synchronous Interface. Please get this response thing clear from the person who assigned this work to you.
Regards,
Abhishek.
Do not forget to award points if you find the information useful

SOAP1 - SOAP2 - SOAP3 BPM scenario

Hi Experts,
This is continuation of the below thread.
SOAP -> SOAP -> SOAP BPM scenario
SOAP1 -> SOAP2 -> SOAP3 BPM scenario
BPM Steps
1. Receive Sync Step -> Receive the SOAP1 request inside BPM.
2. Send Sync Step -> Send SOAP2 request and get the response
3. Send sync Step -> Send SOAP3 request and get the response
4. Send Step -> Send SOAP3 response to SOAP1
SOAP1 DataType
1. DT_SOAP1Request
2. DT_SOAP1Response
SOAP2 & SOAP3 External Definitions
1. SOAP2_wsdl (SOAPRequest and Response datatypes)
2. SOAP3_wsdl (SOAPRequest and Response datatypes)
Message Type
1. MT_SOAP2Request
2. MT_SOAP2Response
Message Interface
1. SOAP1_ABS_Request
2. SOAP2_ABS_Request
3. SOAP2_ABS_Response
4. SOAP3_ABS_Request
5. SOAP3_ABS_Response
6. SOAP1_ABS_Response
Doubt: Do we need to create SOAP1 outbound Sync Message interface also?
Message Mapping (Outside BPM)
1. MM_SOAP1Request_To_SOAP2Request
2. MM_SOAP2Response_To_SOAP3Request
3. MM_SOAP3Response_To_SOAP1Response
Interface Mapping
1. IM_SOAP1_To_SOAP2 (SOAP1request to SOAP2Request)
2. IM_SOAP2_To_SOAP3 (SOAP2response to SOAP3Request)
3. IM_SOAP3_To_SOAP1 (SOAP3response to SOAP1Response)
Could you please help me, whether the approach is correct or not?
Regards
Sara
Edited by: Sara D on Jan 18, 2008 12:33 PM
Edited by: Sara D on Jan 18, 2008 1:02 PM

Hi Prateek,
Now I have to use Sync/Async bridge inside BPM know?
1. Start the BPM process
2. Receive Step -> To Receive the SOAP1 Request
Message : SOAP1_Request(SOAP1_ABS_Req_MI)
Mode : Opens S/A Bridge
Sync Interface ( SOAP1_Sync_ABS_MI   - Input Mesage : MT_SOAP1Request and Output Message MT_SOAP1Response)
3. Send Step -> To send and receive SOAP2 request and response
Mode : Sync
Sync Interface : SOAP2_Sync_ABS_MI   - Input Mesage : MT_SOAP2Request and Output Message MT_SOAP2Response
Request Message : SOAP2_Request (SOAP2_ABS_Req_MI)
Response Message : SOAP2_Response (SOAP2_ABS_Res_MI)
4. Send Step -> To send and receive SOAP3 request and response
Mode : Sync
Sync Interface : SOAP3_Sync_ABS_MI - Input Mesage : MT_SOAP3Request and Output Message MT_SOAP3Response
Request Message : SOAP3_Request (SOAP3_ABS_Req_MI)
Response Message : SOAP3_Response (SOAP3_ABS_Res_MI)
5. Send Step -. To the Sync/Async bridge
Mode : Closes S/A Bridge
Message : SOAP1_response (SOAP1_ABS_Res_MI)
Opend By: Receive1
6. Send Step : To Send the message back to SOAP1 (Not sure whether this step is required or not)
Mode : Asyncr
Message : SOAP1_Response (SOAP1_ABS_Res_MI)
Is the above approach correct? The above steps I have done it before you provide the new Abstract interface objects..Not sure about the flow..
Please correct me, If I am wrong..
SOAP1_Sync_ABS_MI ,SOAP2_Sync_ABS_MI , SOAP2_Sync_ABS_MI   .. Are these Sync Abstract Message interfaces or correct..or I have to use the two MI which you have mentioned it in the thread?
Please respond to me as early as possible.
Regards
Sara

IDoc to soap synchronous scenario with BPM

Hi,
I am working on IDoc to soap synchronous scenario using BPM. Here i am facing lot of soap exceptions in my production system. I handled the exceptions. The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second time. Please let me know why the exceptions are getting, and different type of exceptions and solutions for the same.(Blog also is fine)
Thanks & Regards,
Pragathi.

The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second
time.
Ideally you should not get an exception for the same data....can you tell is the description and where are you getting the exception...is it a part of the SOAP message or some object?
An exception might have occured because the description would be something unacceptable by the target application.
and different type of exceptions and solutions for the same
there would be many blogs....your thread would be spammed...better make a search on SDN with exception text that you are getting.
Regards,
Abhishek.

Hi, In a IDOC --- XI(BPM)--- SOAP Sync Scenario failrure.

Hi, In an IDOC ->XI(BPM)->SOAP Sync Scenario I observed recently messages are failing in SXMB_MONI with an error as:
com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://172.16.209.162/esdryrun/ContractData_Push. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
friends, could u plz help on this.
Thanks,
satya.

Hello,
This indicates a configuration issue with this SOAP receiver adapter. Please check the on line help for the configuration of the SOAP adapter (the link is below). Please set the indicator in the "SOAP Action" field.
Configuring the Receiver SOAP Adapter
http://help.sap.com/saphelp_nw70/helpdata/EN/29/5bd93f130f9215e10000000a155106/frameset.htm
(Below is the extract from the link)
SOAP Action
Specify the SOAP action. The action specifies the value for the
SOAPAction in Web service messages; set the indicator.
Regards,
Sarah

Idoc to Soap BPM issue

Hello Experts,
I have implemented idoc to SOAP scenario using BPM. In which idoc data is sent to CRM webservice.
But my BPM scenario is not able to handle the idocs that are coming in quick succession in SAP PI.
For one idoc i get successful response and the other i gets stuck.
Please reply
Thanks in advance,
Vishal

The BPM goes like this ..
step1. BS system -
> Integration Process IP
step2. IP -
> CRM system
If 2 idocs comes to XI system ...first idoc goes successfully to CRM system
and the second idoc is stucka after step 1 .

Third Party WebService call: SOAP Lookup vs SOAP Adapter Scenario.

Hello Experts,
What are the pros and cons of using SOAP Look up in Message Mapping for webService call.
Previously my scenario was a standard SOAP Adapter Scenario. But it had BPM, so I have designed it via SOAP look up in Message Map to avoid BPM.
I want to know what are the merits and demerits (In terms of Performance - Payload size:Runtime, Maintanence, Configurability,etc) of using SOAP Look up instead of standard SOAP Scenario.
Regards,
Sudharshan N A

HI,
I am assuming that you migth have visted this link
SOAP Lookup - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
SOAP Look-ups are very much possible and performance wise also its preferrable as compare to BPM.
Its pretty much simple and easy way to handle it with UDFs.
The performance could also depend upon what kind of things you need to achive or replacing with BPM.
If you will be dealing with too many resources in BPM then that creates the performance overloaded issues.
UDFs also have the performance problems nased on the payload size but very minimal.
Thanks
swarup

File-Soap-File scenario with asynch - synch bridge

Hi,
I am new to PI and I'm trying to develop a FIle-SOAP-File scenario with asynch-synch bridge. These are the components in my integration builder:
Business Component to act as both the sender and receiver
1 outbound communication channel to pick up the file from ftp server
1 SOAP communication channel
1 inbound communication channel to write file to the ftp server
receiver determination
interface determination
sender agreement
receiver agreement
In my outbound channel, I am using:
Processing sequence:
1     AF_Modules/RequestResponseBean                Local Enterprise Bean     1
2     CallSapAdapter                                                         Local Enterprise Bean     2
3     AF_Modules/ResponseOnewayBean                Local Enterprise Bean     3
Module configuration:
1     passThrough                         true
3     receiverChannel                        inbound communication channel to write file to the ftp server
3     receiverService                         Business component where the channel above is found.
When I run the scenario, I am able to get the file from ftp server, map it to SOAP format according to the wsdl, forward the message to SOAP adapter, send it to web service, get the response back from web service, map the data to a regular file format. However, it fails to write back to the ftp server. I am getting Java null pointer error at AF_Modules/ResponseOnewayBean.
2010-07-28 15:48:01     Information     SOAP: completed the processing
2010-07-28 15:48:01     Information     SOAP: continuing to response message 2ce3ec60-9a9a-11df-b109-00145ec5c1ae
2010-07-28 15:48:01     Information     The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
2010-07-28 15:48:01     Information     The message status was set to DLVD.
2010-07-28 15:48:02     Information     The message was successfully transmitted to endpoint http://vs06cs01.sce.com:8000/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
2010-07-28 15:48:02     Information     The message status was set to DLVD.
2010-07-28 15:48:02     Information     The application sent the message synchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2010-07-28 15:48:02     Information     MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2010-07-28 15:48:02     Error     MP: exception caught with cause java.lang.NullPointerException:
2010-07-28 15:48:02     Error     File processing failed with java.lang.NullPointerException:
Had anyone encountered this error? Any suggestions is greatly appreciated.
Thanks.

Thanks for the replies. I checked my module parameters and I realized that i entered the wrond business service. I fixed that and ensure that all 3 channels are running.
I ran the scenario again and it does not give me Java Null pointer exception. However, it gives me a different errror.
2010-07-29 08:52:31     Information     The message status was set to DLVD.
2010-07-29 08:52:31     Information     MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2010-07-29 08:52:31     Error     MP: exception caught with cause com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2010-07-29 08:52:31     Error     File processing failed with com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
I am trying to check all my settings again. Any pointers regarding the errors above?
Thank you.

Acknowlegment in Client Proxy to SOAP Async Scenario

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
ECC -> PI -> Legacy CRM
I have few threads everyone is posting the following link:
http://help.sap.com/saphelp_nw04/helpdata/EN/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
but how to use in real time scenario is an issue?
Do we have write code in GET_ACKNOWLEDGMENT method while creating ABAP Proxy? I understood that the we can query an acknowledgment with the help of Message ID but how do we pass PI message id to this code?
Thanks a lot
Regards

hey all!!
Please respond.

SOAP-IDOC scenario- HTTP 500 error

Hi All,
We are working on SOAP- IDOC scenario.
We are getting a request from Sender which should come via Reverse Proxy server to PI.
We generated WebService on PI and the URL(X) is shared with Proxy team, wherein they mapped that URL (X)with other URL(Y). This URL (Y)is shared to sender and he is trying to send some requests now.But below is the error message.
[09/02/13 15:26:12] ID=app01 (trace) Delivered HTTP Direct outbound message, containing details...
        Destination URL=https://XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
        User=ZZZZZZZ
        Status Code=500
        [req]Content-Length=7148
        [req]X-HTTPS-ClientAuthCertificate=/AAAAAAAAAAAAAAAA
        [req]X-HTTPS-ClientAuthCertificateForm=PKCS12
        [req]Authorization=Basic RjRGSU5GWEQxMDA6c3luZ2VudGEx
        [req]X-HTTPS-CACertificatePath=/BBBBBBBBBBBB
        [req]X-HTTPS-PrivateKey=/CCCCCCCCCCCCCCCCC
        [req]JMSReplyTo=sga.ws.test.response
        [req]messageuniqueid=6d65d89f-ffff-ffc0-00ee-3aa7032c3299
        [req]adpnextmlemarkersequence=3
        [req]X-HTTPS-PrivateKeyPassword=ZZZZZ[maid
        [req]Content-Type=text/plain
        [resp]content-type=text/xml; charset=utf-8
        [resp]set-cookie=saplb_*=(SERVERNAME)226695750; version=1; path=/
        [resp]set-cookie=saplb_*=(SERVERNAME)226695750; version=1; path=/
Any Clue

Hi,
Check this
HTTP 500
o Internal error in J2EE
o Check SAP Note 807000 - Http requests are not fully read
after timeout
Regards,
Sreenivas

File to Soap Syn Scenario

Hi Experts,
I have created File to Soap syn Scenario.
I am getting following error in RWB (CC monitoring)::
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(1), xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml, ST: ST_XMS_MSGHDR30_DYNAMIC; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage: null; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(1) (or one of the attributes) has incorrect value xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml
Please suggest
T& R
Sushama

Hi Babu,
I am sorry if I was not clear in explaning.
Okay. I meant with the DC parameters the dynamic configuration parameters (or officially called the adapter specific message attributes or ASMA) that the file adapter added in the XI message. I assume Sushama activated this feature to transport the file adapter specific information (e.g., the file name, etc). These parameters are included in the DynamicConfiguration SOAP header. Sushama should check those entries in RWB at the adapter engine.
Some of those parameter values appeared to be too long and resulted in the quoted error:
>sap:DynamicConfiguration(3)sap:Record(1) (or one of the attributes) has incorrect value
Once which parameters are too long, Sushama can decide on how to resolve this issue using one of the options that I suggested in my previous reply.
I hope you got the idea this time.
Best regards, Yza

IDOC to SOAP synchronous scenario

Hi All,
We have an IDOC to SOAP synchronous scenario in which IDOCs are sent to SOAP by calling a service and then SOAP sends a response back to XI . The response is not sent to SAP- R3. Please suggest on this
Thanks

Hello Rajesh,
Thanks for your good justification.
Here I have also replicated same kind of scenario and having same kind of issue.
One thing just wanted to confirm - Even though SOAP adapter expects HTTP 200 response back from webservice, still SOAP channel is getting into red with following , and as we have Alert configured ...Alert mail also receiving as part of Error only. So How can we avoid that response ? Is there have any parameter to handle or suppress the response back?
Thanks!
Goutam

ERROR During call of SOAP with a SOAP- RFC- SOAP Synchronous scenario

Hello Experts,
I've recently created a SOAP->RFC->SOAP synchronous scenario but every time I'm invoking the SOAP via XMLSpy then i will hang and send a timeout error. Also a log in XI was generated as shown below.
I hope you could help me on this one.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          28.09.2010 09:31:23
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
     procedure "DELETE_LUW_PACKET" "(FORM)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
Regards,
Alfred

Normally such an error comes when the DB of SAP PI is full.
Contact your BASIS or ADMIN team and ask them to free the DB space.
Regards,
Abhishek.

SOAP to JDBC/RFC - RFC/JDBC to SOAP XI Scenario

Hello,
Can anybody give me the links for SOAP to JDBC/RFC-BAPI or RFC-BAPI/JDBC ---> XI ---> SOAP XI Scenario?
I tried searching, but there isn't any step-by-step approach for it.
Thank you in advance.
Cheers,
Deepak.

Hi,
Check some links on SOAP,
RFC -> XI -> WebService - A Complete Walkthrough
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
SOAP with attachments
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
SOAP
An Overview of SOAP
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
JDBC ADAPTER
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
Regards,
phani
Reward points if Helpful

Connection closed by remote host on SOAP Receiver Scenario

Hi Experts,
I implemented a RFC to SOAP Receiver scenario, consuming an external
Web Service with SSL security, using SAP PI 7.1. I configured the SOAP
Receiver Adapter with Proxy e Proxy User, and it shows the
message u201CConnection closed by remote hostu201D. I have checked with
Network team, about the firewall restrictions, and they told me it was
pass by firewall. I installed the SOAP UI on the PI DEV Server to test
the SOAP Requets and it worked. Only on the PI it shows this error
message. I traced log at SLL service in the Sap Netweaver Administrator
and I didnu2019t get success.
Long text error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException:
java.io.EOFException: Connection closed by remote
Please, could you help me about this error?
Fábio Ferri

Hi Fabio,
You need to set higher trace level in order to get more information in your trace file.
If you think it is related to security then set logging level of components com.sap.aii.security.lib and com.sap.aii.af.security to DEBUG in Visual Admin's log configurator. Also set com.sap.aii.af.mp.soap and com.sap.aii.messaging to DEBUG level.
And then try sending messages and see whether you have received more informaiton in trace file, but don't forget to revert back the change once you finish testing otherwise it will filled up your diskspace.
Best regards,
Pinkle

SOAP to SOAP BPM scenario

Similar Messages

Maybe you are looking for