SOAP - XI - File (Sync)
Hi,
I have a question about the SOAP -> XI -> File scenario. Normally it is quite simple if I have one File receiver here. My scenario is a bit different. The SOAP client need actually to get information from the File Payload. It is logically like the DB server, one SOAP client needs get some information from server and send one soap request to XI, XI perorm one Lookup/Update/ what ever on the JDBC server and send information back to the client. Unfortunately we don't have DB server as interface but only File.
In this case the client send one SOAP request and we cannot say "look at file system at location xyz and get the file back, if there is one". How could we implement this scenario with XI without BPM ?
regards,
Hai
hi hai,
we can do like this.
why we use file adapter to make the conevrsions primarly
file format to xml and XML to file format.
if u genrate a web request from a service then we need to pick the respective file for that request and pass it on to web response(SOAP response) this is what i understood.
go for webservice -XI- webservice scenario.
asynch
XI people will publish interface with SOAP request as input.
SOURCE system people will call this interface for getting respective file.
now XI will fetch the respective file through UDF and will pass it to receiver system i.e they are ready to give SOAP resposne.
now source system people should write a program which consumes source response as input.
thereby they will publish webservice which takes the SOAP response and does the needful at the system level.
here SOURCE system is acting both as sender and receiver.
sender for sending file request and reciever for getting the respective data from XI.
there by its a WEBSERVICE-XI-WEBSERVICE asynch scenario.
FILE reciever is replaced because u r gonna take the functionality in UDF.
or u can also go for XSLT mapping.
now
1)GO FOR a Message Mapping
in that give the source message type as SOAP request and taget message type as SOAP response.
and in the message mapping for the UDF(java program) which reads the file with respect to source file and generates the response.
2)create 1 interfaces which takes SOAP request as input
publish this interface which will be consumed by SOURCE system
3)XI will consume a webservice which is published by source system which ll process SOAP response.
interface mapping consiste of iNTERFACE CREATED BY XI and INTERFACE CONSUMED BY XI.
create 2 SOAP ADAPTERS
1)sender
2)receiver.
hope this will give u the picture.
the power lies in XSLT mapping or java mapping or UDF.
think u ll be in right position to judge.
any issue plz revert.
Thanks & Regards,
Rama Krishna
Similar Messages
-
Is it possible to create soap to file sync/async bridge
Hi All,
I am balakrishna, I have one requirement, at sender side we have ep system and at receiver side having http system. from ep side we are using soap req/res as sync communication. At reciver side we have to use the reciver file adapter as a dummy because receiver file adapter doesn't pick the file from the http links. so, again we have to use the sender file adapter to pick the files (text/excel) from the http links directly using wget os command. how can i implement this scenario using bpm.Hi,
You will find a sample BPM for sync/async bridge under
SAP BASIS --> http://sap.com/xi/XI/System/Patterns --> Integration Process --> BpmPatternSyncAsyncBridge.
Your requirement would be similar to this.
Regards -
SOAP to File !!!!!!!!!!! possible or not??? without BPM
Hello Friends....
WOuld it be possible to implement this scenario without s/a BPM?
If yes, then from where the response would send to SOAP ?
I have created following objects in Repository,
data type for SOAP request
Data type for SOAP response
Data type for File request
Data type for File response(dont know do i need this)
Message types for them
two interface mapping....
outbound sync (soap request and soap response)
inbound sync (file request and file response)
message mapping
soap request to file request
file response to soap response
in interface mapping.... I am confused...what to do in there??
thanks,
PranavI want sync communication between SOAP and File...
response could be anything...any constant or just confirmation that data has been sent.
DO i need to use synch/async BPM for this or could i do it without that as well.
what kind of response we get from sync/asyn bridge??? -
Performance Issue: Wait event "log file sync" and "Execute to Parse %"
In one of our test environments users are complaining about slow response.
In statspack report folowing are the top-5 wait events
Event Waits Time (cs) Wt Time
log file parallel write 1,046 988 37.71
log file sync 775 774 29.54
db file scattered read 4,946 248 9.47
db file parallel write 66 248 9.47
control file parallel write 188 152 5.80
And after runing the same application 4 times, we are geting Execute to Parse % = 0.10. Cursor sharing is forced and query rewrite is enabled
When I view v$sql, following command is parsed frequently
EXECUTIONS PARSE_CALLS
SQL_TEXT
93380 93380
select SEQ_ORDO_PRC.nextval from DUAL
Please suggest what should be the method to troubleshoot this and if I need to check some more information
Regards,
Sudhanshu BhandariWell, of course, you probably can't eliminate this sort of thing entirely: a setup such as yours is inevitably a compromise. What you can do is make sure your log buffer is a good size (say 10MB or so); that your redo logs are large (at least 100MB each, and preferably large enough to hold one hour or so of redo produced at the busiest time for your database without filling up); and finally set ARCHIVE_LAG_TARGET to something like 1800 seconds or more to ensure a regular, routine, predictable log switch.
It won't cure every ill, but that sort of setup often means the redo subsystem ceases to be a regular driver of foreground waits. -
Statspack: High log file sync timeouts and waits
Hi all,
Please see an extract from our statpack report:
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
log file sync 349,713 215,674 74.13
db file sequential read 16,955,622 31,342 10.77
CPU time 21,787 7.49
direct path read (lob) 92,762 8,910 3.06
db file scattered read 4,335,034 4,439 1.53
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file sync 349,713 150,785 215,674 617 1.8
db file sequential read 16,955,622 0 31,342 2 85.9
I hope the above is readable. I'm concerned with the very high number of Waits and Timeouts, particulary around the log file sync event. From reading around I suspect that the disk our redo log sits on isn't fast enough.
1) Is this conclusion correct, are these timeouts excessively high (70% seems high...)?
2) I see high waits on almost every other event (but not timeouts), is this pointing towards an incorrect database database setup (give our very high loads of 160 executes second?
Any help would be much appreciated.
JonathanTop 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
log file sync 349,713 215,674 74.13
db file sequential read 16,955,622 31,342 10.77
CPU time 21,787 7.49
direct path read (lob) 92,762 8,910 3.06
db file scattered read 4,335,034 4,439 1.53
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file sync 349,713 150,785 215,674 617 1.8
db file sequential read 16,955,622 0 31,342 2 85.9What's the time frame of this report on?
It looks like your disk storage can't keep up with the volume of I/O requests from your database.
The first few thing need to look at, what're IO intensive SQLs in your database. Are these SQLs doing unnecessary full table scan?
Find out the hot blocks and the objects they belong.
Check v$session_wait view.
Is there any other suspicious activity going on in your Server ? Like other program other than Oracle doing high IO activities? Are there any core dump going on? -
I recently purchased a movie (Prometheus) on my computer through iTunes and every time I try to put it on my iPhone, it fails. How can I successfully sync this video? Mind you, every other file syncs flawlessly.
Can you connect to a wifi source on the device? Enable wifi in settings on the device itself. If you don't have wifi at home, there may be a local hotspot you can use for this.
The reason this happens is carriers don't want people downloading huge files that would slow their network as well as eat up your data plan. -
Offline Files sync gives Access Denied on Windows 8.1 Enterprise
A small number of our staff have now been issued with Windows 8.1 Enterprise hybrid tablet computers, however there is a problem with using Offline Files on them - when synchronising, it responds "Access Denied".
The tablets have Windows 8.1 Enterprise with all the latest updates on them. Staff users have a home folder on the network under \\server\staff\homes\departmentname\username which gets mapped to U: and their My Documents is redirected there. The server is currently
Windows Server 2003 R2 SP2.
We have tried:
Resetting the Offline Files cache using the FormatDatabase registry key
Using Group Policy Objects to force Offline Files synchronisation at logon and logoff
Clearing the local cached copy of the user's profile from the machine and getting them to log back on to recreate it
Setting up Offline Files event logging to the event viewer - this provides no useful information as it only logs disconnect/reconnect and logoff/logon events
Forcing Group Policy update using gpupdate /force
Forcing synchronisation using PowerShell and https://msdn.microsoft.com/en-us/library/windows/desktop/bb309189%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
As suggested by http://support.microsoft.com/kb/275461 we gave the All Staff security group Read permissions on F:\Staff (which is the one that is shared as \\server\staff) and then blocked inheritance for folders below that
We also checked the following:
The CSC cache has not been relocated
No error 7023 or event 7023 errors relating to Offline Files are present in the event logs
The Offline Files service is running
The OS is already Windows 8.1 Enterprise, so installing the Pro Pack is not applicable
In HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\UserState\UserStateTechnologies\ConfigurationControls all the values are set to 0 and not 1
We do not use System Center Configuration Manager
No errors were found in the Folder Redirection event logs
None of these solved the problem, does anyone have any suggestions?
Here is the error we are seeing:
Thanks,
Dan Jackson (Lead ITServices Technician)
Long Road Sixth Form College
Cambridge, UKHi,
Generally speaking, this problem is most probably occurs at File Server Client.
Firstly, please check the sharing file Sync Settings.
Shared file properties\Sharing\Advanced Sharing\Caching
Also check shared file user list, make sure these problematic user account have full permission.
On the other hand, could you able to access to the shared file directly in Windows Explorer?
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Yes, the user can access the shared folder in Windows Explorer. The user has the following permissions:
Traverse Folder/Execute File
List Folder/Read Data
Read Attributes
Read Extended Attributes
Create Files/Write Data
Create Folders/Append Data
Write Attributes
Write Extended Attributes
Delete
Read Permissions
Here is a screenshot of how the Caching settings are set up on the top-level Staff share. -
I have gigabytes of Adobe CC files arranged in appropriate client folders in Dropbox (and mirrored on my local hard drive).
It looks like if I turn File Sync on (needed to access Assets) some or all of this will be duplicated and separated from non-Adobe data in each client file.
Messy, unnecessary and 100GB of bandwidth I don't want to pay for! (I'm on 4G so it's expensive.)MichaelGli2,
The Creative Cloud desktop application will only sync files that are in your "Creative Cloud Files" folder on your local machine.
By default, the "Creative Cloud Files" folder is in your user's home folder (/Users/<yourusername>/Creative Cloud Files/ on Mac, or C:\Users\<yourusername>\Creative Cloud Files\ on Windows).
Unless you have deliberately changed the location of your Creative Cloud Files folder yourself so that it is inside your local Dropbox folder, there will be no duplication. -
Metalink note 34592.1 has been mentioned several times in this forum as well as elsewhere, notably here
http://christianbilien.wordpress.com/2008/02/12/the-%E2%80%9Clog-file-sync%E2%80%9D-wait-event-is-not-always-spent-waiting-for-an-io/
The question I have relates to the stated breakdown of 'log file sync' wait event:
1. Wakeup LGWR if idle
2. LGWR gathers the redo to be written and issue the I/O
3. Time for the log write I/O to complete
4. LGWR I/O post processing
5. LGWR posting the foreground/user session that the write has completed
6. Foreground/user session wakeup
Since the note says that the system 'read write' statistic includes steps 2 and 3, the suggestion is that the difference between it and 'log file sync' is due to CPU related work on steps 1, 4, 5 and 6 (or on waiting on the CPU run queue).
Christian's article, quoted above, theorises about 'CPU storms' and the Metalink note also suggests that steps 5 and 6 could be costly.
However, my understanding of how LGWR works is that if it is already in the process of writing out one set of blocks (let us say associated with a commit of transaction 'X' amongst others) at the time a another transaction (call it transaction 'Y') commits, then LGWR will not commence the write of the commit for transaction 'Y' until the I/Os associated with the commit of transaction 'X' complete.
So, if I have an average 'redo write' time of, say, 12ms and a 'log file sync' time of, say 34ms (yes, of course these are real numbers :-)) then I would have thought that this 22ms delay was due at least partly to LGWR 'falling behind' in it's work.
Nonetheless, it seems to me that this extra delay could only be a maximum of 12ms so this still leaves 10ms (34 - 12 -12) that can only be accounted for by CPU usage.
Clearly, my analsys contains a lot of conjecture, hence this note.
Can anybody point me in the direction of some facts?Tony Hasler wrote:
Metalink note 34592.1 has been mentioned several times in this forum as well as elsewhere, notably here
http://christianbilien.wordpress.com/2008/02/12/the-%E2%80%9Clog-file-sync%E2%80%9D-wait-event-is-not-always-spent-waiting-for-an-io/
The question I have relates to the stated breakdown of 'log file sync' wait event:
1. Wakeup LGWR if idle
2. LGWR gathers the redo to be written and issue the I/O
3. Time for the log write I/O to complete
4. LGWR I/O post processing
5. LGWR posting the foreground/user session that the write has completed
6. Foreground/user session wakeup
Since the note says that the system 'read write' statistic includes steps 2 and 3, the suggestion is that the difference between it and 'log file sync' is due to CPU related work on steps 1, 4, 5 and 6 (or on waiting on the CPU run queue).
Christian's article, quoted above, theorises about 'CPU storms' and the Metalink note also suggests that steps 5 and 6 could be costly.
However, my understanding of how LGWR works is that if it is already in the process of writing out one set of blocks (let us say associated with a commit of transaction 'X' amongst others) at the time a another transaction (call it transaction 'Y') commits, then LGWR will not commence the write of the commit for transaction 'Y' until the I/Os associated with the commit of transaction 'X' complete.
So, if I have an average 'redo write' time of, say, 12ms and a 'log file sync' time of, say 34ms (yes, of course these are real numbers :-)) then I would have thought that this 22ms delay was due at least partly to LGWR 'falling behind' in it's work.
Nonetheless, it seems to me that this extra delay could only be a maximum of 12ms so this still leaves 10ms (34 - 12 -12) that can only be accounted for by CPU usage.
Clearly, my analsys contains a lot of conjecture, hence this note.
Can anybody point me in the direction of some facts?It depends on what you mean by facts - presumably only the people who wrote the code know what really happens, the rest of us have to guess.
You're right about point 1 in the MOS note: it should include "or wait for current lgwr write and posts to complete".
This means, of course, that your session could see its "log file sync" taking twice the "redo write time" because it posted lgwr just after lgwr has started to write - so you have to wait two write and post cycles. Generally the statistical effects will reduce this extreme case.
You've been pointed to the two best bits of advice on the internet: As Kevin points out, if you have lgwr posting a lot of processes in one go it may stall as they wake up, so the batch of waiting processes has to wait extra time; and as Riyaj points out - there's always dtrace (et al.) if you want to see what's really happening. (Tanel has some similar notes, I think, on LFS).
If you're stuck with Oracle diagnostics only then:
redo size / redo synch writes for sessions will tell you the typical "commit size"
redo size + redo wastage / redo writes for lgwr will tell you the typical redo write size
If you have a significant number of small processes "commit sizes" per write (more than CPU count, say) then you may be looking at Kevin's storm.
Watch out for a small number of sessions with large commit sizes running in parallel with a large number of sessions with small commit sizes - this could make all the "small" processes run at the speed of the "large" processes.
It's always worth looking at the event histogram for the critical wait events to see if their patterns offer any insights.
Regards
Jonathan Lewis -
Log file sync top event during performance test -av 36ms
Hi,
During the performance test for our product before deployment into product i see "log file sync" on top with Avg wait (ms) being 36 which i feel is too high.
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
log file sync 208,327 7,406 36 46.6 Commit
direct path write 646,833 3,604 6 22.7 User I/O
DB CPU 1,599 10.1
direct path read temp 1,321,596 619 0 3.9 User I/O
log buffer space 4,161 558 134 3.5 ConfiguratAlthough testers are not complaining about the performance of the appplication , we ,DBAs, are expected to be proactive about the any bad signals from DB.
I am not able to figure out why "log file sync" is having such slow response.
Below is the snapshot from the load profile.
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 108127 16-May-13 20:15:22 105 6.5
End Snap: 108140 16-May-13 23:30:29 156 8.9
Elapsed: 195.11 (mins)
DB Time: 265.09 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,168M 1,136M Std Block Size: 8K
Shared Pool Size: 1,120M 1,168M Log Buffer: 16,640K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 1.4 0.1 0.02 0.01
DB CPU(s): 0.1 0.0 0.00 0.00
Redo size: 607,512.1 33,092.1
Logical reads: 3,900.4 212.5
Block changes: 1,381.4 75.3
Physical reads: 134.5 7.3
Physical writes: 134.0 7.3
User calls: 145.5 7.9
Parses: 24.6 1.3
Hard parses: 7.9 0.4
W/A MB processed: 915,418.7 49,864.2
Logons: 0.1 0.0
Executes: 85.2 4.6
Rollbacks: 0.0 0.0
Transactions: 18.4Some of the top background wait events:
^LBackground Wait Events DB/Inst: Snaps: 108127-108140
-> ordered by wait time desc, waits desc (idle events last)
-> Only events with Total Wait Time (s) >= .001 are shown
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % bg
Event Waits -outs Time (s) (ms) /txn time
log file parallel write 208,563 0 2,528 12 1.0 66.4
db file parallel write 4,264 0 785 184 0.0 20.6
Backup: sbtbackup 1 0 516 516177 0.0 13.6
control file parallel writ 4,436 0 97 22 0.0 2.6
log file sequential read 6,922 0 95 14 0.0 2.5
Log archive I/O 6,820 0 48 7 0.0 1.3
os thread startup 432 0 26 60 0.0 .7
Backup: sbtclose2 1 0 10 10094 0.0 .3
db file sequential read 2,585 0 8 3 0.0 .2
db file single write 560 0 3 6 0.0 .1
log file sync 28 0 1 53 0.0 .0
control file sequential re 36,326 0 1 0 0.2 .0
log file switch completion 4 0 1 207 0.0 .0
buffer busy waits 5 0 1 116 0.0 .0
LGWR wait for redo copy 924 0 1 1 0.0 .0
log file single write 56 0 1 9 0.0 .0
Backup: sbtinfo2 1 0 1 500 0.0 .0During a previous perf test , things didnt look this bad for "log file sync. Few sections from the comparision report(awrddprt.sql)
{code}
Workload Comparison
~~~~~~~~~~~~~~~~~~~ 1st Per Sec 2nd Per Sec %Diff 1st Per Txn 2nd Per Txn %Diff
DB time: 0.78 1.36 74.36 0.02 0.07 250.00
CPU time: 0.18 0.14 -22.22 0.00 0.01 100.00
Redo size: 573,678.11 607,512.05 5.90 15,101.84 33,092.08 119.13
Logical reads: 4,374.04 3,900.38 -10.83 115.14 212.46 84.52
Block changes: 1,593.38 1,381.41 -13.30 41.95 75.25 79.38
Physical reads: 76.44 134.54 76.01 2.01 7.33 264.68
Physical writes: 110.43 134.00 21.34 2.91 7.30 150.86
User calls: 197.62 145.46 -26.39 5.20 7.92 52.31
Parses: 7.28 24.55 237.23 0.19 1.34 605.26
Hard parses: 0.00 7.88 100.00 0.00 0.43 100.00
Sorts: 3.88 4.90 26.29 0.10 0.27 170.00
Logons: 0.09 0.08 -11.11 0.00 0.00 0.00
Executes: 126.69 85.19 -32.76 3.34 4.64 38.92
Transactions: 37.99 18.36 -51.67
First Second Diff
1st 2nd
Event Wait Class Waits Time(s) Avg Time(ms) %DB time Event Wait Class Waits Time(s) Avg Time
(ms) %DB time
SQL*Net more data from client Network 2,133,486 1,270.7 0.6 61.24 log file sync Commit 208,355 7,407.6
35.6 46.57
CPU time N/A 487.1 N/A 23.48 direct path write User I/O 646,849 3,604.7
5.6 22.66
log file sync Commit 99,459 129.5 1.3 6.24 log file parallel write System I/O 208,564 2,528.4
12.1 15.90
log file parallel write System I/O 100,732 126.6 1.3 6.10 CPU time N/A 1,599.3
N/A 10.06
SQL*Net more data to client Network 451,810 103.1 0.2 4.97 db file parallel write System I/O 4,264 784.7 1
84.0 4.93
-direct path write User I/O 121,044 52.5 0.4 2.53 -SQL*Net more data from client Network 7,407,435 279.7
0.0 1.76
-db file parallel write System I/O 986 22.8 23.1 1.10 -SQL*Net more data to client Network 2,714,916 64.6
0.0 0.41
{code}
*To sum it sup:
1. Why is the IO response getting such an hit during the new perf test? Please suggest*
2. Does the number of DB writer impact "log file sync" wait event? We have only one DB writer as the number of cpu on the host is only 4
{code}
select *from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for HPUX: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
{code}
Please let me know if you would like to see any other stats.
Edited by: Kunwar on May 18, 2013 2:20 PM1. A snapshot interval of 3 hours always generates meaningless results
Below are some details from the 1 hour interval AWR report.
Platform CPUs Cores Sockets Memory(GB)
HP-UX IA (64-bit) 4 4 3 31.95
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 108129 16-May-13 20:45:32 140 8.0
End Snap: 108133 16-May-13 21:45:53 150 8.8
Elapsed: 60.35 (mins)
DB Time: 140.49 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,168M 1,168M Std Block Size: 8K
Shared Pool Size: 1,120M 1,120M Log Buffer: 16,640K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 2.3 0.1 0.03 0.01
DB CPU(s): 0.1 0.0 0.00 0.00
Redo size: 719,553.5 34,374.6
Logical reads: 4,017.4 191.9
Block changes: 1,521.1 72.7
Physical reads: 136.9 6.5
Physical writes: 158.3 7.6
User calls: 167.0 8.0
Parses: 25.8 1.2
Hard parses: 8.9 0.4
W/A MB processed: 406,220.0 19,406.0
Logons: 0.1 0.0
Executes: 88.4 4.2
Rollbacks: 0.0 0.0
Transactions: 20.9
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
log file sync 73,761 6,740 91 80.0 Commit
log buffer space 3,581 541 151 6.4 Configurat
DB CPU 348 4.1
direct path write 238,962 241 1 2.9 User I/O
direct path read temp 487,874 174 0 2.1 User I/O
Background Wait Events DB/Inst: Snaps: 108129-108133
-> ordered by wait time desc, waits desc (idle events last)
-> Only events with Total Wait Time (s) >= .001 are shown
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % bg
Event Waits -outs Time (s) (ms) /txn time
log file parallel write 61,049 0 1,891 31 0.8 87.8
db file parallel write 1,590 0 251 158 0.0 11.6
control file parallel writ 1,372 0 56 41 0.0 2.6
log file sequential read 2,473 0 50 20 0.0 2.3
Log archive I/O 2,436 0 20 8 0.0 .9
os thread startup 135 0 8 60 0.0 .4
db file sequential read 668 0 4 6 0.0 .2
db file single write 200 0 2 9 0.0 .1
log file sync 8 0 1 152 0.0 .1
log file single write 20 0 0 21 0.0 .0
control file sequential re 11,218 0 0 0 0.1 .0
buffer busy waits 2 0 0 161 0.0 .0
direct path write 6 0 0 37 0.0 .0
LGWR wait for redo copy 380 0 0 0 0.0 .0
log buffer space 1 0 0 89 0.0 .0
latch: cache buffers lru c 3 0 0 1 0.0 .0 2 The log file sync is a result of commit --> you are committing too often, maybe even every individual record.
Thanks for explanation. +Actually my question is WHY is it so slow (avg wait of 91ms)+3 Your IO subsystem hosting the online redo log files can be a limiting factor.
We don't know anything about your online redo log configuration
Below is my redo log configuration.
GROUP# STATUS TYPE MEMBER IS_
1 ONLINE /oradata/fs01/PERFDB1/redo_1a.log NO
1 ONLINE /oradata/fs02/PERFDB1/redo_1b.log NO
2 ONLINE /oradata/fs01/PERFDB1/redo_2a.log NO
2 ONLINE /oradata/fs02/PERFDB1/redo_2b.log NO
3 ONLINE /oradata/fs01/PERFDB1/redo_3a.log NO
3 ONLINE /oradata/fs02/PERFDB1/redo_3b.log NO
6 rows selected.
04:13:14 perf_monitor@PERFDB1> col FIRST_CHANGE# for 999999999999999999
04:13:26 perf_monitor@PERFDB1> select *from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS FIRST_CHANGE# FIRST_TIME
1 1 40689 524288000 2 YES INACTIVE 13026185905545 18-MAY-13 01:00
2 1 40690 524288000 2 YES INACTIVE 13026185931010 18-MAY-13 03:32
3 1 40691 524288000 2 NO CURRENT 13026185933550 18-MAY-13 04:00Edited by: Kunwar on May 18, 2013 2:46 PM -
File to Web service (SOAP) to File scenario with out BPM in PI 7.1
Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
RameshHi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number Module Name Module Key
1.......... AF_Modules/RequestResponseBean.......1
2.......... CallSapAdapter..........................................2
3.......... AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key Parameter Name ParameterValue
1 passThrough true
3 receiverChannel receiverChannel name
3 receiverService receiverService name
please tell any more confiration requered.
Regards,
Ramesh -
Error in SOAP to file scenario
Hey guys
i m doing a SOAP to File scenario and getting the following error.
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
any idea where should i look ?
thanx
ahmadHey
i m still getting a red flag in MONI,the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
i checked my mapping by copyin payload from MONI,its working fine.
thanx
ahmad -
Unable to launch File sync and to update Adobe Exchange panel in Illustrator CC 2014
I suppose that these two problems might be related, as I need the file sync to sync the extensions?
Anyway, I’m unable to launch a file sync, and when I update the Adobe Exchange panel in Illustrator, it asks for a reboot, and after the reboot, it asks again for an update…
Thanks for the help!I've since received information of a workaround - listed in a different thread: Unable to install non-standard updates - Cannot launch/update Adobe Digital Publishing for InDesign CC 2014
Try the following to enable updates:
1) Navigate to C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0 and you will find a .dat file ( AdobeUpdaterAdminPrefs.dat).
2) Please open the file in question and you will find a line item : <Suppressed>1</Suppressed> .
3) Please change the Value from 1 to 0 and save the file back in the same location.
On a Mac, essentially the same, however location: /Library/Application Support/Adobe/AAMUpdaterInventory/1.0/AdobeUpdaterAdminPrefs.dat
I was given further advice that DPS toolkit updates are not available when you create the deployment package from Adobe Application Manager Enterprise Edition on Mac OS. (I believe this may be the same using Creative Cloud Packager as you've found)
Deployment DPS Toolkit Update| AAMEE |Mac OS
The above article suggests that you can download and install the DPS update silently, however, an end user must be logged into computer - not really feasible for enterprise environments.
So I guess the process for this would be:
1)Copy the contents of the DPS update package to remote machine
2)Enable updates by modifying the AdobeUpdaterAdminPrefs.dat file
3)Remotely launch the DPS update silently (when someone is logged onto machine)
4)Disable updates again when complete... -
Why can't I use the creative cloud connection file syncing?
I hear people raving about it on twitter, so why am I only seeing a 'coming soon' message in the files tab of my creative cloud interface? I would very much like to use the file syncing to work between two computers! What is going on here? Is there some kind of area restriction going on for this service?
Sign up for early access to File and Font Syncing. It's being rolled out slowly to work out the early glitches:
http://blogs.adobe.com/creativecloud/file-and-typekit-font-sync-rolling-out/ -
File Sync does not stay on in Adobe Creative Cloud - OSX Mavericks
To download assets (clip art) from Creative Cloud Market, File Sync in CC must be on. I turn it on, but when I try to download it turns itself off. Anyone else have this issue?
Please try the workaround posted here:
Re: Creative cloud doesnt create a cloud folder on my Users Folder?
This seems to have worked for a few other users. Hopefully we'll be able to release a fix to this issue soon.
Thanks,
Elba
Maybe you are looking for
-
Adding a 2nd hard drive to a p6-2026
I want to install a second hard drive to my p6-2026 desktop to be used for auto backup. when I open the case it looks like their is no way to do this.
-
Pop up windows are loading to the right (off the page)
I have a 27" new iMac. In Safari when I open some pictures or pop up window they load far to the right cutting 1/2 of the window, off the screen. Does anyone have any ideas? Thanks
-
Help Iphone one stuck on connect to itunes!!
Bought on ebay. Wont go into dfu. Wont connect to itunes. Screen says connect to itunes....
-
Adobe Flash will not update to a W-2000 system and will not work in Firefox? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?
-
I am having trouble understanding how to get icloud on my IMAC