Softkey problems on different devices

Hi!
This is a basic problem. How can I determine what are the keycodes of the softkeys (right / left) on a canvas?
On a Sony Ericsson the codes are -6 and -7, on an old Motorola -21 (or 21) and -22 (or 22), but I don't know which devices do this stupid thing.
(Sorry for my bad english.)

If so, have to develope one tool, which takes your
source code as input along with parameters like
device name. Your Tool should read the soft key
informations from your database and replace it in
your code.
Disadvantage is like you have to keep your data base
updated for each devices key information.
j2me@com
Good concept -- anybody know whether the major manufacturers are consistent across models? By that I mean ,all Nokia phones return the same values, all Motorola phones ditto and so on.
Becuse if this is so, OP could use configurations to generate separate builds for each manufacturer (using #IF / #ELIF) and wuuldn't require either run-time detection or a possibly large, potentially impossible-to-update database.
@OP
You could combine the best of both worlds by having these separate builds (provided manufacturers maintain some consistency -- and also providing an option for manual setup.
Let us know the solution!
Cheers, :D

Similar Messages

I bought an iPhone 4S last year. Today was the 5th time that one of my Audible books was suddenly cut off 3/4 into the book.The solutions offered to correct the problem did not work. Next phone won't be an iPhone. And books will go on different devices.

Does anybody else have problems with Audible books being cut off in mid-listening, and none of the solutions suggested comes even close to being applicable? It's my 5th time in a year. And I've had it. The interruptions and consequent time consuming attempts to find a solution, and once I do, again spending way too much time finding the place in the book, where I was so rudely interrupted have pushed my patience to the limit. I downloaded my books on different devices, and use my iPhone for calls and texting. Once it's time to get a new Smartphone I'll stay far, far away from any Apple product. I don't care to waste time to get my smartphone to do what it is supposed and offering to do. And I am really getting ****** of when I am driving in the middle of nowhere, listening to a good book and Apple decides that that would be a good time to put a stop to that. Mostly I wanted to get a response from Apple Support, and am not sure how I was channeled into an Apple Support Community (what a ridiculous term!). My problem is with Apple itself. But not for long anymore......

Anything?

How to prevent an encrypted backup from being restored to a different device?

If I force an employee to do an encrypted backup (which I can do with a configuration profile), and that employee is fired. We take back the company iphone, but they go and buy a personal one. They connect the new, personal iphone to itunes and do a restore of the encrypted backup (they know the password) and now they have all the work related stuff on their personal phones. Is there a way to prevent an encrypted back from being restored to a different device id.

We require encryption of our employee backups as well...and the problem you mention is a real one.....
If you use Exchange, you could disable Exchange Active Sync to prevent them from subsequently connecting to Exchange Server and getting new data with the new personal device....but you would still have the old data as part of the backup...the other issue is that we've found that the profile is part of the backup and if an employee leaves, even on good terms, if he wants to restore say, his music from the backup without the profile, it becomes quite awkward...the profile would have to be removed, ( which removes everything added with the profile, possible email and wi-fi), then the user could backup music etc with iTunes, then return the corporate phone to be salvaged or re-deployed...and later put his personal data back on another device without the profile...if there is a way around the issue you bring up I'd like to know of it as well. . Perhaps there is an MDM with functionality that would help here....that is one great strength of the Blackberry platform..all corporate data can be controlled from the BES server.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Can I use the same email address for facetime on 2 different devices (ipod touch and a mini)

can I use the same email address for facetime on 2 different devices (ipod touch and a mini)?
I've set up my daughters ipod touch last year all fine. She's had a mini this yr but when setting up facetime and entering her email address, which is used on the touch, I get an error message saying the address is already being used.
I thought you can use the same email address on multiple devices.

I have four different email addresses setup on my Mac, iPod Touch and my two iPads that I can select from and use as the email address with no problems at all.
Turn off FaceTime, and sign out of the Apple ID in the FaceTime settings, restart the iPad and try again. Turn FaceTime on again, sign in with the Apple ID and then try the email address again.

Problem with PnP devices, Unknown device, error code:28

Hello, my USB Mass Storage Device Not Recognized( Flash drive- HP v156w, 16 GB)
Full story : I opened flash disk, started to loading and opening files very slow, suddenly all writing, names of the files become unreadable. I took off the flash disk and try again. I got the message- disk have to be formated to be used
again. After a lot of try I got this message:
Unknown device doesn't have a driver ; and Problem with PnP devices when i run trouble shoot in devices and printers on my Sony VAIO laptop( Windows 8, 64 bit), and error code:28 for unknown device doesn't have a driver.
Do other usb devices work ok in the same usb port? - yes
Has someone else/or you used it on another pc?- yes
Does it work ok on a different pc? - the same problem
Did you pull it out with using 'Safely Remove Hardware'? - yes, a lot of time after its become invisible, unknoun
Was it previously working ok with your W8 laptop? - never tried befor
Disk Management can't see the drive.
device manager:
usb device with yellow sine and instead name strange sines
divice tipe - other devices
manufacturer - unknown
location- on USB Mass Storage Device
status: The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
I have done that -
"open device manager make sure show hidden devices is ticked and right click on all the USB hidden devices and unistall them. once done reboot and put in the flash drive again and see if windows finds it."
situation the same(((( Disk Management can't see the drive.
please if any one know the fix please help
Its very important info for me on the flash disk.

I'd ask them over here.
http://answers.microsoft.com/en-us/windows/forum/windows_8?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

MPD: ERROR: problems opening audio device

Since a day, maybe a little more, mpd is troubling me. When I use mpc, I get the error
ERROR: problems opening audio device
This is my mpd.conf
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/adriaan/Music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "adriaan"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
group "users"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
# format "44100:16:2" # optional
# mixer_type "hardware" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional
#audio_output {
# type "alsa"
# name "Sound Card"
# options "dev=dmixer"
# device "plug:dmix"
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"

milso wrote:
type "alsa"
name "equal"
device "default"
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
I have mine set to plug:plugequal as I use an equalizer with alsa, but when I set it to default it works fine, try that.
That didn't work out.
Mr.Elendig wrote:Tell mpd to be more verbose. And check that mplayer -ao alsa whatever works.
Here's the output of mpd -v
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: daemonized!
daemon: writing pid file
Doesn't contain anything unusual.
EDIT: oh, and mplayer -ao alsa works fine.
Last edited by arthd (2011-02-09 15:14:09)

WAP4410N problems, slightly different than the previous ones

Hello,
I've just purchased a WAP4410N-E V02 for home use and I'm experiencing some strange problems. Whenever the device is close to other electrical devices, it slows down until it eventually grinds to a halt, sometimes requiring a power cycle. I can ping the AP, or my gateway (over the wireless connection), and the ping times go from 1-20ms to 15,000ms+. After a certain amount of time, the wireless connection completely dies and the AP isn't even reachable over the wired network (no ping, no http).
By close, I mean like 1m away in some cases, or less in other cases. Since this is for home use, it's a bit of a problem, as my placement options are quite limited. Here are the 2 scenarios:
1) close to my vdsl modem/router
the wireless-G connection on the router is turned off.
Distance is 1m.
The AP is plugged into the router.
This setup is completely unusable, as it instantly becomes slow. If I pull it away about 2m and place the AP on the floor, it works fine.
2) plugged into my switch close to the tv/pvr (tv over ip)
Distance is up to 2m.
When the tv is on by itself, no problem
When the pvr is on, the AP starts becoming unstable.
If I turn the pvr off, it recovers (unless I left it on long enough, then it gets stuck for good and never recovers).
So I can really reproduce these problems now. At first I thought it was completely random and I was trying all sorts of different ideas like changing channels, changing ssid settings, etc..
Am I really putting this device in situations where it wasn't designed to work? Just because it's a small business device, I don't see why it shouldn't work 1m away from a home VDSL modem, or 2m away from a tv tuner/pvr. I can't really mount it high up on the wall, away from all interference because it wouldn't look so nice. I guess home use has different priorities.
Also, seeing how other people have certain unexplainable problems with these devices, could it be related? I don't know how their setups are, but I can say that the behaviour is similar to other posts that I've read.
What is the proper way to proceed with this problem? Do I just return it to the store? Do I need an RMA? Or does Cisco have some recommendations that I can try so I don't have to return it? I'm quite disappointed that I've lost a whole day trying to diagnose these issues. I was hoping that if I spend a bit more money on a business-grade product, I would save time with trying to figure out the quirks of most home products, but it seems to be the opposite in this case.
As a note, I have done the following, as per previous posts regarding this AP:
- using A/C adapter, not POE
- Hardware reset
- Install firmware 2.0.4.2
- set wired port to 100mbps
- single SSID, WPA2-Personal, 11 character a-z key
- B/G/N Mixed,
- Channel 11 (tried Auto as well)
- Key renewal 36000
- disabled connection control
- 802.11d disabled, Germany, 20MHz bandwidth

See all the settings available in XLD and that will give you an idea as to how ripping could potentially vary between rippers. I don't know the details of how iTunes works but error detection has a lot of different settings with XLD. iTunes does some too, but I don't think the details are publicly available for comparison.
It may not only vary with the rip settings but also with the encode settings if you are using mp3 or AAC.

Restored iMac from an MBP Backup giving problems with external devices

Recently, I restored from an MBP Leopard OS Time machine Backup into a new iMac 27".
Restoring process ran smoothly and took like an hour to recover my files and applications from the external disk time machine backup and after that the new iMac had everything my old MBP used to have but the OS. So far so good.
But now I'm having problems connecting external devices, like the very same external disk to set my time machine backup or a Cannon Printer.
The iMac can recognize and attach the external HDD (iOmega 1TB), I've succesfully formated it several times, but as soon as the backup process starts it will idle after backing 200MB or so and the HDD will be abruptly disconnected.
Regarding the MP610 Cannon printer/scanner I used it smoothly once from this iMac, but after that it's been impossible to scan or print again, and it keeps saying it is connected to an MBP instead of an iMac!
I already read the other related topics but my case is slightly different than those, so I will appreciate anyhelp you could provide me.

When you say you restored, what does that mean? Did you do a full restore, installing the system from the backup onto the iMac? If so, you've probably borked the system and will have to reinstall it. See:
http://support.apple.com/kb/HT2186
Also, if you restored applications, it's possible some of those applications are not installed correctly or are not compatible with SL. Printing problems are common among folks who have not updated printer drivers to SL-compatible versions.

How do I reset my iCloud old inaccessible email and password with my new iTunes email and password currently working on a different device? Thanks for any suggestions ,

How do I reset my iCloud old inaccessible email and password with my new iTunes email and password currently working on a different device? Thanks for any suggestions ,

TThat's the problem. I've tried to delete the current icloud account but in order to that you need to put in the old password which I don't have so it kicks me out.

Synchronization of calendars on different devices

Has anyone else had a problem with the calendar and reminders not synchronizing on different devices? I make changes on my Mac Mini but they do not reflect on my MacBook Pro, iPad, or iPhone. If I make changes on any of the other three, they are all synchonized, but do not show up on my Mac Mini. Email and chat are good, but the others are not consistant.
Any ideas?

Assuming you are using iCloud, on the Mini, open Calendars.
Click the Calendars button on the top left of the window.
Make sure all the boxes are checked for the calenadars
you want to sync.
Also, under Preferences in Calendars, make sure the account
is enabled and has the correct Apple ID and refresh is set to
Push.

Re-directing problems on apple devices

I am getting constant pop-ups and being re-directed to dubious websites when I click on links in both safari and chrome. I am having this problem on both my OS X 10.6.8 laptop, older desk top computer, and new iPhone 6 plus - do I have a virus or is it a chrome/safari issue?

What you describe is likely to be a network issue, as that's one of the only common causes that could affect all those different devices at the same time. See:
http://www.adwaremedic.com/kb/hackedrouter.php
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com.)

Same configuration systems have different device addresses

The problem we have is that identically configured systems are sometimes
assigning different device numbers when the systems are booted. Each
individual system always assigns the same device numbers - what puzzles us is that
different systems, although configured identically, assign different device numbers.
More particularly:
Problem Description :
A tester with 4 PXI chassis and 10 PCI cards in an industrial computer
backplane with the same configuration of cards (same instruments in same
slots) on a multi-chassis tester gives different addresses or separate
identical testers under Windows XP. To be clear, this system also has
multiple (10) PCI cards in the industrial computer, as well as the MXI-3
interface to multiple (4) PXI chassis. Under Windows 2000, the device
addressing to all the PCI and PXI cards would remain the same as long as
all the cards were put into the same slots. This problem causes us to
modify our software for each new large industrial tester (called UMATS at
Northrop Grumman).
NI Software : LabVIEW version 8.2.1
NI Hardware : PXI Controllers, Chassis, and MXI device PXI-8330
Driver Version : MXI-3 1.15
OS : Windows XP
Thanks,
Martin Cohen

I am not sure if this is applicable or not. I uniquely identify the names of the devices via MAX. In the program. I refer to these names. When I have a new setup, I use MAX to configure the various devices on the deploy machine to their respective names (does not matter what order they are placed in). Run my compile code on the machine without any changes to the program.

Spotify Connect & Yamaha Reciever problems - See the device but cannot connect.

I have a Yamaha RX-V577 reciever with Spotify Connect and update to the last firmware.
When I try to connect spotify using the Android APP, I see the device but cannot conect to it.
What are the steps you took to get to the error/issue?
1. I star a song
2. Click on the speaker sign with a circle, and click on the receptor (Yahama device).
3. The grey rounder speaker sign goes from grey to green and the sound waves moves (like tryng to connect).
4. After a while it goes back to grey.
IMPORTANT I dont know how sometimes it works, dunno how but after trying alot yesterday It worked. But cannot reproduce it.

I have the EXACT same issue BUT on a Sony STR 1050! It worked fine up until lately. Sometimes I get it to work, but mostly not. When it works, it's very unreliable and often not in synch.
It still works absolutely fine with my Computer/Spotify App. I can even tell my PC to use my AVR as sound output and the connect to my PC to listen via my AVR. But connecting directly to my AVR is a PITA. Since more users have the same problem across different AVRs, it seems to be a new Spotify problem and not an issue with my AVR.
When can we expect that this issue is fixed!? I'm using this feature constantly.

I have one Itunes account for myself and children. Can we facetime each other on different devices?

I have one Itunes account for myself and my children. Can we facetime each other on different devices?

Yes, you can.
See here: https://www.apple.com/ios/facetime/

Softkey problems on different devices

Similar Messages

Maybe you are looking for