Software always installs to Domain Admin account on connected PC-cant install to Domain User account

I have completed the following steps:
Set up Windows Server 2012 R2 Essentials successfully
Successfully connected a Windows 8.1 Pro PC to the network by running the Essentials Connector software
The PC has the following users: Original local account created when I installed Windows 8, Domain Admin account created when I ran the Essentials Connector account, Domain User created after PC was connected to the network.
Everything seems to be working fine. I have installed MS Office 365 Pro, Skype, various other applications while logged in as the Domain User. Every one of these installs triggered a UAC prompt, which was expected, and after entering the Domain Admin
credentials the install proceeded successfully. After install, the software was available to the Domain User, shortcuts appeared in the Start Menu or Desktop, appropriate directories were created in the Documents folder.
All except for 3 applications - upon being prompted for permission to install, I enter the Domain Admin credentials, installation proceeds, but the software is installed to the Domain Admin account-not the Domain User account. Shortcuts appear on the Domain
Admin desktop-Not the Domain User account, etc. I've tried:
Downloading a new copy of the software to the Domain User desktop & running it from there
Right-click file, Install as Admin
click file, Install as a different user
Right clicking file, Properties>Compatibility & changing compatibility settings
Right clicking file, Properties>Compatibility>Run as Administrator
None of these options have changed the result, the software is still installed to the Domian Admin account as opposed to the Domain User account. Any idea why these 3 software wont install correctly but everything else has? Any suggestions as to how to install
the software to the profile that doesn't involve making the Domain User an Administrator? Thanks for any help!

Hi voltron5,
Many programs may provide options: "install for everyone" or "just for current user", when you install them.
Please check if there are such options during the installation process.
If those three programs are all third-party applications. I suggest you should contact with the corresponding
support and confirm this.
If those three programs are Microsoft applications, would you please let me know specific information of those
three applications? Such as their names and so on. Meanwhile, when complete the installation, please check the software path was added in administrator environment variables or system environment variables.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Microsoft office is installed on two user accounts. One account works fine, the other account keeps getting an error message. Why wont it work on both accounts?

Microsoft office is installed on two user accounts. My husbands account works fine, but my account keeps getting an error message every time I try to open up a new document. Why wont it work on both accounts? How do I fix this?

Hi Aubs,
Without knowing what the error is, there's not much help we can provide....
Cheers,
GB

Internet disconnects when trying to connect a vpn on a different user account on the same computer

Im trying to have one user account with my real ip address and another user account on windows 8 with a vpn connection. Everytime i switch (i dont logout i just lock the user) then try to connect a vpn on the other user account the internet disconnects
on the other user account. It's like it wants to change my entire internet connection to use the vpn instead of having a seperate connection on each user account. is there a way around this or am i stuck having to use two laptops? I also unchecked
Use default gateway on remote network on the vpn.

Hi,
Try to temporary disable firewall to see if the same issue occurs.
Leo Huang
TechNet Community Support
This is definitely not the answer. Why is it marked as the answer?

I use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

Welcome to Apple Support Communities
That's the classic behaviour after using Migration Assistant and that's normal.
To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472

TS3276 There are two User accounts on my iMac. The two Users have seperate email accounts. Both email Mailboxes show up in each Account. If I Delete Mailbox from in User account, does it delete the Mailbox from the other User account at the same time?

There are 2 Users on my iMac. Each User has their own email account. Both account Mailboxes show up in each User's account. If I delete a Mailbox in one account, does it delete the same Mailbox in the other Account?

If you click the - sign in Mail preferences, it will delete that mail account. If you just delete the Mailbox, that will just delete the Mailbox.
Each user can put their own email account information in Mail when logged into their User Account.
If you don't want the other user's mail account to show up in your mail application, then make sure the other user's messages are available to them when they are logged into their account and delete the other user account from Mail in your User Account. The other user can do the same when logged into their user account. Any messages stored in one locally will have to be transfered to the other's user account if it's not saved in their user login.
In addition, instead of deleting the account at first, highlight the account and open the Advanced Tab and disable the account. That email account will dissappear from Mail. Once you decide that you don't want the account, you can delete it. If you need to get back to it to transfer messages, just re enable it.

My mail can send out message but can't receive new e-mail? and some software(adobe illustrator cs) and applications(terminal) can't run ? but in another user account, terminal and illustrator can run.

Hi,
My Mac info:
Machine Name:          Power Mac G5
Machine Model:          PowerMac7,3
CPU Type:          PowerPC G5 (3.0)
Mail Version 2.1.3 (753.1)
My mail application can send out message but can't receive new e-mail now ? please see attached before my capture screen
and some software(adobe illustrator cs) and applications(terminal) can't run ? please see attached
but in another user account, terminal and illustrator can run.
Please kindly help to check with these problems. Thanks.

Verify and Repair disk “Data”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
Repairing volume.
Rechecking volume.
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Data was repaired successfully.
Mounting Disk
1 HFS volume checked
Repair attempted on 1 volume
1 HFS volume repaired

Installing programs across user accounts.

I have recently installed a whole load of new programs on my user account, but my girlfriend can't access any of these on her user account. Is there any way of doing this, without installing the same software again on the 2nd account, as surely it's on the computer somewhere already?!?

Hi and a warm welcome to the forums!
Was your account an Admin account?
Did it ever ask install for all users?
There are several Applicationd folders, one at Root for everyone, and one in each User's folder too.
Not certain if this'd work, maybe Permissions changes needed for her to access, but you might try dragging them from your Applications folder to the one at Root, but many will have stuff in the User's Library needed elsewhere, so you really may need to re-install them all anyway.

How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

This is complex. Until today we had one iMac with two user accounts - one for me and the other for my wife. We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us. Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd. (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
We've finally bought my wife an iPhone and set up an iCloud account for her. And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff. But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine. But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
Originally I tried a workaround by simply having her iPhone log into my iCloud account. That works great for the calendars and the contacts. But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account. And neither of us want to sync our other things to each other's iMac accounts or iPhones. Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's. So we definitely don't want this as the set-up and communications network between our devices.
We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone). Does this description make sense to you? I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work. If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
If anyone can help me set this up I'd be most appreciative! Thanks so much. Merry Christmas and Happy New Year to all readers in this community!

BobT.
I had the same problem, and decided to look into it last night.
First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing.
Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
From this point on, the 3 devices should sync contacts with each other.
This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

Outlook refuses to add another exchange account on the same computer on another Local User Account

So at home I have a family computer with some computer accounts.
at two of them, I installed Outlook 2013. On the first one, I added a existing Exchange account, and everything went well.
but when I tried adding another existing Exchange account (on the same domain) Outlook displayed this message about 'not being able to set up a secure connection'. both the accounts existed and are working.
Is this because of the secure mail port (465) was already occupied?
what do I have to do?
please help me!

Hi,
I understand that you setup one Exchange account on the first local account successfully, but failed to setup the second Exchange account on the second local account.
As for the question "Is this because of the secure mail port (465) was already occupied? " I don't think it's the cause, but anyway, we can temporarily remove the first Exchange account from the first local account, and then try to add
the second Exchange to the Second local account and see if the account can be configured successfully.
I'd also like to know whether these accounts are local administrators or standard users, are the different permissions making a difference?
If there's anything that I misunderstood, please feel free to let me know.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Connection to iTunes fails with second user account

Hi there!
For some weeks now I am experiencing Problems connecting the iTunes of a Second User to Apple TV. I keep getting the error message that the connection failed and I should check if the iTunes is in the same network. Dumb message since one second before I selected the iTunes library of the second user in the list on Apple TV and before that I watched content from the iTunes library of the first user without any problems. So it is not the network connection.
This error can be easily reproduced:
Set up multiple user accounts on Mac
Set up home sharing on Apple Tv and all iTunes of them user accounts
Restart all to beginn test
Open iTunes of any user
Access content on Apple TV without problems
Keep first user logged in and iTunes running while switching to second user on Mac
Open iTunes of second user
Second library will show up on Apple Tv
Try access second users library - error message will be shown
First iTunes library still works fine
Close first users iTunes and error will stay
Close all iTunes and restart Apple Tv
First iTunes open will work - any second will not
System:
MacOS 10.7.5, iTunes 10.7 (21), Apple Tv 2 with OS 5.1 (5201), network via Ethernet cable to Time Capsule router
Thanks for any tips to get rid of this error!
Cheers!
Gerd

Hi all!
Still the same, very reproduceable problem? No solution anyone?
Upgraded to latest OS on ATV2 (5.2.1) and iMac and iTunes (11.0.2). No result. Obviously this issue is being ignored by apple techs or it is really just me having this problem.
Thanks for any help!
Gerd

Connecting to a NAS with different user accounts

First, I just want to say that as a recent PC ---> Mac convert, I have been quite pleased with the switch. However, I just can't seem to figure out this issue.
I have a Netgear DNS-323 NAS that I use for multiple purposes: backup, storage, video/audio streaming...etc. I am trying to set up quotas within the NAS to keep data usage in check. However, I cannot seem to get OSX to connect to the different NAS shares with a different user name for each one.
For example, I am using one share for my time machine backup (yes, I know it is unsupported, let's leave that out for this discussion). That share is //192.168.x.x/MacBackup. I have set up a single user that has access to that share with a quota of 400GB (so TM doesn't eat up the entire NAS). That user's name is "backup".
I have another share that I use for music/movies. That share is //192.168.x.x/Media. I want to connect to that share with a different account than the "backup" account used for the TM share. That way, I don't eat into the quota established for the backup share.
However, no matter what I do, I cannot get OSX to let me configure it this way. Which ever share I connect to first is the only one I can connect to. For example, if I connect to the backup share as the backup user, than I cannot access the media share as it gives me access denied errors (as it should, as it still thinks I am the "backup" user).
I have tried adding both of the username/password combinations into the keychain application, but I cannot seem to get it to work.
Any suggestions as to what I am doing wrong?

I guess no info on this. I will try and see how I fare. if anyone is interested let me know in which case i can share findings.
One way round this might eb sharing libraries but I am not sure that is legal strictly as I suppose parents MAC in the Netherlands does not classify as a household MAC....

My one user account will not let me open anything on it, so I started a new user account which works. Is there anyway I can get my bookmarks onto the new user account without needing to be ON the new user account?

When I try to open up any files or any application on the other account it says the file not found

You can change a password for an Apple ID. However, now whoever finds the iPod will know his email address and I assume that the email address is his Apple ID.
Apple ID: Changing your password
According to the terms of the iTunes Store, you have to be 13 in order to have an Apple ID.

Any unintended consequences to separate admin & user accounts?

Hi all,
I work on a single-user system, but I have wondered if there were any security advantages to having a separate admin and user accounts. I found an unrelated advantage - Parental Controls. Lacking self-discipline, I find myself working too late at night. Setting up Parental Controls might help me get more sleep, but this requires a separate admin account. I would need to create a separate account with admin privileges, then remove those privileges from my existing user account. Are there any unintended consequences to having one's user account not have administrator's capabilities? I do software development, but so far that is all in the user space, ie. application vs. drivers. Any unintended consequences to setting up Parental Controls on my user account?
Thanks,
Scott

You need at least one Admin account on the machine.
There is a security advantage running most tasks as "general user" on another account as the Applications and other folders/system can't be modified unless the Admin password is used. (in General user)
I run as General all the time, there is a slight hassle with installing programs into the Applications folder or moving things around in there, but it's worth it for the extra security and I don't do it too often.
Also Software Update won't run automatically neither. But it's best to wait for the others to go first sometimes and then proceed carefully.
However I don't know the effects with software development, your might be doing it in Admin space now and have no issue, but once you got to General you'll have to enter your password more often.
Try it and see how it goes, you can always go back to Admin.
Create another Admin account, log into it, change your Admin Account to General User and log out and into it.

How can I auto load Safari thru a non-Admin user account

Okay, maybe I don't want to do this - - but can I?
I have my old iMac setup to turn on at 8am. I would like to access it remotely through LogMeIn.com. But I need Safari running for remote access.
I'd prefer to have Safari running in a 'Guest' User Account with no Admin rights (then from LogMeIn.com, switch to my user account and I can enter my password manually).
I know how to auto login to a Guest account, but how do I have that account auto start Safari? Only Administrators can have programs start automatically, right?
I don't want to auto-login (with password if that's even possible) to my main Administrator account.
Any suggestions?
Thanks in advance

I use iKey to remap the keys. It has a little more function then youpi key. For many years, I used youpi key before switching to iKey.
In addition, ikey will allow you to run ikey applications when ikey starts.
!http://farm3.static.flickr.com/2700/4178949301_cea8fa07a2.jpg!
You might like iKey/youpi key. I have my frequently used applications set to f keys. The same f key starts an application and switches to the application.
Youpi key is free. It works fairly well for me in MAC OS 10.4 although not officially supported. There is a commercial version you can buy, called iKey.
http://www.versiontracker.com/dyn/moreinfo/macosx/11485&vid=75326
I have the common programs that I use assigned to function keys. I have F4 assigned to Firefox. When I want to start FireFox, I press F4. When I want to switch to firefox, I press F4! Starting & switching to an application in Mac OS are the same thing in Mac OS.
Here is an example of to assign volumn control to a function key.
http://discussions.apple.com/message.jspa?messageID=10361085#10361085
Here is a solution with XTool. XTool Uses exact screen addresses. So a movement of an icon will cause you trouble.
do shell script "/usr/sbin/system_profiler SPDisplaysDataType | grep 'Resolution'" -- get info
tell the result to set {DisplayWidth, DisplayHeight} to {word 2, word 4} -- get resolution
--move mouse {DisplayWidth div 2, DisplayHeight div 2} -- center mouse
move mouse {670, 13} --sound
click mouse
move mouse {673, 96} --sound level
click mouse
move mouse {555, 282} -- center mouse
click mouse
   First, there is the XTools scripting addition, which will give AppleScript the ability to move the mouse.
   http://www.lestang.org/osax/XTool/
   XTool-2.0-src.dmg.tgz
   Installation :
   Drag
.osax from insite the image to one of the following locations (create the directory if it does not exist) :
a : ~/Library/ScriptingAdditions/
   b : /Library/ScriptingAdditions/
   c : /System/Library/ScriptingAdditions/
   I have it in directory /System/Library/ScriptingAdditions/
   My other two directories do not exit: ~/Library/ScriptingAdditions/ &
      /Library/ScriptingAdditions/
.    Next, you will need to place a script application into your login items (System Preferences > Accounts > Login Items) that will move the mouse when you log in:

Software always installs to Domain Admin account on connected PC-cant install to Domain User account

Similar Messages

Maybe you are looking for