Solaris 10 Install CD Not Found...

Hello,
i'm trying to evaluate solaris 10 11/06. I'm using a Tyan Tiger K8SSA (S3870G2NR-RS) motherboard, and an Areca ARC1110 SATA2 PCI-X 4-Port RAID Controller.
I have...
1 sata drive plugged into the onboard sata controller
3 hard drives plugged into the arc1110 raid card
1 cdrom plugged into the onboard ide controller
1 floppy drive plugged into the onboard floppy controller
When my bios is set with the sata controller emulating pata (default bios setting) after the the network interface configuration screen, solaris complains that it does not find any valid solaris os cd/dvd install disks. (does not see cdrom?)
When my bios is set with the sata controller emulating sata after the network interface configuration screen, solaris complains that there are no hard disks (does not see the sata hard drive?)
The Tyan motherboard has an xgi volari z7 onboard video which solaris doesn't seem to recognize because the graphical install screen never shows up.
Any help you be appreciated. Thanks!

@tsienv,
The original post was about incompatible x86-based architecture.
Your question appears to be about a bad individual home-made CD disk
and how it seems to behave with a SPARC-based system.
If the Ultra-30's optical drive can still work with disk #1 and disk #2 and disk #3,
then the problem is with how you created disk #4. Do it again... at 4x speed.
If the Ultra-30's CD drive has suddenly developed problems reading
more than just the one individual disk, then replace the drive.
It's old.
Ten years old.
The Ultra-30 has a resource page in the Sun System Handbook.
http://sunsolve.sun.com/handbook_pub/Systems/U30/U30.html
There is a link on that page to your OBP patch.
Patch 105930will get your systemboard up to version 3.27.0
Your OBP version of 3.7 suggests the computer has never had any maintenance of any sort.
Thus my vote is for that SCSI CD drive.

Similar Messages

Oracle Clinical install problem on SUN. Says install.sh not found - java runtime erro

install.sh not working - need help
Hi all,
OS Solaris 8. Sun Sparc 20 - 256 MB 9.1 GB
I have installed Oracle 8.1.6 Rel 2 on the SUN Sparc. Everything is fine and a customised DB has been created. Now I
have to install an Oracle application on the same server. I have a working knowledge of Unix but I don't know scripting.
I logged in as OPAPPS as required. (.chsrc). I have set the path with all possible directories and made it a member of
group DBA as requested.
I put the CD in the CDROM and then cd /cdrom
# install.sh
BUT I get this message: install.sh not found.
install.sh is there on the CD. This is the contents of install.sh from the CD
#!/bin/sh
os=`uname | tr A-A a-z`
case "$os" in
sunos) platform=solaris
hp-ux) platform=hp-ux
osf1) platform=decunix
esac
#The environment variable $SRCHOME cannot be set during installation
unset SRCHOME
unset SHLIB_PATH
CMDDIR=`dirname $0`
if [ "CMDDIR" = "." ]; then
CMDDIR=`pwd`;
fi
# Replace relatove path with fully qualified path
if [ ! "`echo $CMDDIR|grep '^/'`" ]; then
CMDDIR=`pwd`/$CMDDIR;
fi
if [ x${PATH} != x ] ; then
PATH=$PATH:/usr/bin: /bin
export PATH
else
PATH=/usr/bin:/bin
fi
cd $CMDDIR/$platform/Disk1/install/$platform
./runinstaller $*
directory structure on CD
-r-xr-xr-x 1 root sys 638 Aug 23 2000 install.sh
dr-xr-xr-x solaris
dr-xr-xr-x hpunix
dr-xr-xr-x decunix
dr-xr-xr-x nls732
solaris/disk1/install/solaris and the file
-r-xr-xr-x runinsta.
-r-xr-xr-x oraparm.ini
dr-xr-xr-x images
d .
d ..
Would anybody know why I get install.sh NOT found when it is there?.
Thanks for your help.

Hi,
I am installing Oracle clinical 4.5.x.
I need to know whether both the Database server and application server for Oracle Clinical can be installed on same server(windows 2000 server).
Both of them are installed on windows platform.
It seems that u have tried the single node installation.
So,please give all the possible details regarding the single node installation for oracle clinical no matter what platform it is.
Please reply me as soon as possible, its urgent.
Thanking u in advance.

Installed but not found on computer

I've successfully installed the latest 10.1 for my 64-bit laptop with Windows 7. A check by Adobe confirms that it was properly installed, and that I have the correct version for my computer.
AND YET, there is no icon for it anywhere, it doesn't come up on my list of Programs, when I enter "Adobe Flash Player" in the search bar it shows no such program, and when I try to play a FLV file, it won't give me Flash Player as an option. So..... I have it on my computer, but I apparently am not allowed to see it or access it?
I've uninstalled and re-installed several times, and cannot for the life of me figure out what the problem is. Any help for this maddening situation?

Hi,
Yes, I read his comments and I made sure Shockwave Flash Object was enabled in IE as he suggested. I am trying to make a flip book. One of the posts here in the forum said to make a SWF file, which I did. But now I can't figure out how to do anything with it. I thought Flash Reader was the right program to look at it, but maybe I'm wrong? Maybe I need Flash itself? The flip book thing has me pretty frustrated and confused. All the sites and software I've tried are poor quality. I was hoping I could figure out how to do it through Adobe to get better quality.
1. Oct 17, 2010 1:30 PM in response to: jonstrebler
Re: Installed but not found on computer
Hi, Flash Player is a browser plugin, not a stand alone Player. You should have Shockwave Flash Object in add ons in IE and make sure it is enabled.
Your Flash files are in C:\Windows\SysWOW64\Macromed\Flash
You may want the Adobe Media Player:http://www.adobe.com/products/mediaplayer/
Hope that helps,
eidnolb

[SOLVED]/usr/lib/arch-tempfiles line 106: install:command not found

Hi everyone!
This is my boot.log
http://pastebin.com/1gfynhSN
It says"/usr/lib/initscripts/arch-tmpfiles:line 106: install:command not found".This is leading to problems such as dbus and network manager not being started(even manually),no shutdown option,not able to 'open' log files without sudo etc.
I think a possible reason for this is that I had messed up with symlinks.I had issued the command
sudo ln -s /bin/install /usr/bin/install
.Then I had used
cd /bin/
unlink install
Now,I find that /bin/install and /usr/bin/install does not exist.(I have deleted them!) .How can I fix this up?Any help would be appreciated.
Last edited by adwaita45 (2012-04-05 20:41:40)

Reinstall coreutils (or manually extract install from the package and put it in /usr/bin).
Last edited by Raynman (2012-04-05 18:14:10)

Make: /usr/bin/install: Command not found

I'm working on a PKGBUILD, but I'm running into this:
make: /usr/bin/install: Command not found
make: *** [install] Error 127
==> ERROR: Build Failed.
Aborting...
What would cause this? Old code? Missing package?

It was actually really old code, after a bit of successful this-should-probably-work script editing! I created a package in the AUR called dasm, which is an assembler for the Atari 2600 among many other systems.
http://aur.archlinux.org/packages.php?ID=37200

[SOLVED] Error uninstalling eclipse: "post-install: command not found"

When I try uninstalling eclipse , I get "error: command failed to execute correctly"
w0ng@e8500 ~
% sudo pacman -Rns eclipse
checking dependencies...
Targets (8): glib-networking-2.30.2-1 gsettings-desktop-schemas-3.2.0-1 gstreamer0.10-0.10.36-1
gstreamer0.10-base-0.10.36-1 libproxy-0.4.7-1 libsoup-2.36.1-1 libwebkit-1.6.3-1
eclipse-3.7.2-2
Total Removed Size: 243.84 MiB
Do you want to remove these packages? [Y/n] y
(1/8) removing eclipse [######################################] 100%
/tmp/alpm_eY6rVO/.INSTALL: line 10: post-install: command not found
error: command failed to execute correctly
(2/8) removing libwebkit [######################################] 100%
(3/8) removing libsoup [######################################] 100%
(4/8) removing glib-networking [######################################] 100%
(5/8) removing libproxy [######################################] 100%
(6/8) removing gsettings-desktop-schemas [######################################] 100%
No schema files found: removed existing output file.
(7/8) removing gstreamer0.10-base [######################################] 100%
(8/8) removing gstreamer0.10 [######################################] 100%
w0ng@e8500 ~
But all files appear to be removed successfully.
w0ng@e8500 ~
% sudo updatedb && locate eclipse
/usr/share/highlight/themes/edit-eclipse.theme
/usr/share/icons/Faenza/apps/16/eclipse.png
/usr/share/icons/Faenza/apps/22/eclipse.png
/usr/share/icons/Faenza/apps/24/eclipse.png
/usr/share/icons/Faenza/apps/32/eclipse.png
/usr/share/icons/Faenza/apps/48/eclipse.png
/usr/share/icons/Faenza/apps/64/eclipse.png
/usr/share/icons/Faenza/apps/96/eclipse.png
/usr/share/icons/Faenza/apps/scalable/eclipse.svg
/var/abs/community/eclipse-cdt
/var/abs/community/eclipse-cdt/PKGBUILD
/var/abs/core/licenses/eclipse-1.0.txt
/var/abs/extra/eclipse
/var/abs/extra/eclipse-ecj
/var/abs/extra/eclipse/PKGBUILD
/var/abs/extra/eclipse/eclipse.desktop
/var/abs/extra/eclipse/eclipse.install
/var/abs/extra/eclipse/eclipse.sh
/var/abs/extra/eclipse/eclipse.svg
/var/abs/extra/eclipse-ecj/PKGBUILD
/var/abs/extra/eclipse-ecj/ecj
w0ng@e8500 ~
Should I be concerned or is everything fine? Can anyone reproduce this?
Last edited by w0ng (2012-03-28 19:00:30)

Check /var/abs/extra/eclipse/eclipse.install. Typo in post_remove: post-install should be post_install. You can run the post_install manually (and maybe report this in the bug tracker), but it just updates the gtk icon cache, so it's nothing to worry about.

Relocation Error In Solaris - Symbol 0FI__rtbi_fv not found

Hi!,
I get the following error, when i try to load a library using JNI, (jdk 1.3.0_02) in Solaris 2.6 :
It cribs about symbol __0FI__rtbi_fv not found.
I used nm on the .so and got the following output -
[123762] | 0| 0|NOTY |GLOB |0 |UNDEF |__0FI__rtbi_fv
Kindly help me in overcoming this problem. Its bit urgent.
Exception in thread "main" java.lang.UnsatisfiedLinkError: /disk1/anuj/Sinu/usrtool/obj/libusrtool.so:
ld.so.1: /disk1/sriram/java1.3/bin/../bin/sparc/native_threads/java:
fatal: relocation error: file /disk1/anuj/Sinu/usrtool/obj/libusrtool.so:
symbol __0FI__rtbi_fv: referenced symbol not found
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1382)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1306)
     at java.lang.Runtime.loadLibrary0(Runtime.java:749)
     at java.lang.Runtime.loadLibrary(Runtime.java:737)
regards
Sriram

It is not in the java documentation because it is not a java problem.
When you write JNI code (or any other code for that matter) you probably should look at the documentation for the compilers and other tools that you are using for recommendations for how to use these third party tools.
What would have been surprizing to me, is if your C++ compiler manual did not recommend linking with the standard C++ library when you use code contained in the library. Which was the problem here.

Networkless install gives "not found in sync db" error

I'm trying to install on a laptop which whose network drivers are not in the install kernel and which doesn't have a cd. All files have to be transferred by usb till I can get it up and running and install the drivers.
I got the machine to boot from the network (pxeboot) and got into the install shell without any problems. On another machine I downloaded the current core iso, mounted it and copied all the packages to a usb disk which I then mounted as /src/arch/pkg on the laptop.
When doing step 2 of the install I got an error that it couldn't find /src/arch/pkg/setup so I created that directory, the errors went away but I then didn't get any packages in the package list. I tried mounting the package disk as /src/arch/pkg/setup and then tried again. This time I got a list of packages. I selected them all and went to step 3.
At this point it tries to access the network to refresh the package database, fails and gives me the error:
error: 'acl-2.2.47': not found in sync db
Looking in VT5 I get
error: failed to retrieve file 'current.db.tar.gz' from : No such file or directory
error: filed to synchronize current: no such file or directory
error: filed to synchronize any databases
Have I done something wrong? Having to create the setup directory feels wrong, I thought I just put the packages in /src/arch/pkg so I'm guessing that that may have something to do with it.
If not, how can I get round this? Can I create a database and drop it on the machine?

unselect ABS from the package selection and try again.
Then install the abs package from the completed base install.

Adobe Reader XI installed but "Not Found"

I have Adobe Reader XI installed and apparently running normally. Unfortunately the UK's Parcelforce web-site says it can't find it.
I get the message " Adobe Acrobat NOT found. You must have Adobe Reader (5 or better) with the browser plugin properly working"
Can anyone help me please? How can I tell if "the browser plugin is properly working" ?

In IE11 use Tools | Manage Add-ons, then show All Add-ons. Do you see the Adobe PDF Reader add-on, and is it enabled?

New software instruments installed but not found to use

Help please
I have downloaded 3 new AMG expansion, synth and power packs in garageband 08' running on a g5 with leopard os and though they appear on the HD where they should (HD/library/garageband/instrument library/sampler/sampler instrument) they are not found once inside garageband-new software track instruments.
Why is this happening and how can newly installed software instruments appear for use inside a track?
Thanks!

Not being sure exactly what you have tried, or what failure message(s) you have received, here's a general iPad troubleshooter.
iPad Support

Make, Make install - Command not found. How do I get these commands working

Hi guys!
I am trying to compile the php using the command ./configure and make, make install but every time I try to use the comand "make" it says "command not found". Do you know how can I install these bibliotec?
Thanks in advance.
Felipe Moreira.

Hi Felipe, Welcome to Apple's Users Help Users Forums.
Glad you got it solved.
Thanks in Apple Forums is through the Stars system. See the blue box at the top of the thread as well as the Apple emails re new posts to the thread.
With the buttons just to the left of "Reply" for the OP = Original Poster.
1 Green Solved available. 10 pts.
2 Gold Helpful available. 5 pts.
Mark the buttons at the appropriate post. (Not this one. ;~) )
Joyous Computing, JP

E63-Installed apps not found in Installations fold...

This happened recently.The icons of my installed apps were not found in the Isntallations folder of my E63.i went to tools>memory and it detected my memory card.I went to memory details and it also showed me what was my memory status.
I restarted the phone and took out and put in the memory card many times but the problem still persists.Everything else is working normally.

ound the proble.My private folder was not in the C drive.I f

Mac Flash player install - actionlist not found

Hi:
I'm behind all kinds of firewalls and other internet security stuff. I can't do anything about it. IT won't help me. How do I install the latest Flash player? I keep getting the error "Actionlist not found". I think it's network security. Any ideas?

Sorry, I didn't notice the 'Mac' mention in the subject line. The offline installer for OS X is http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

Bios not installed, device not found

I'm sure someone can answer this, but I can't. When booting, I get the message "bios not installed" and "device not found." Now, I know it doesn't pertain to the actual bios, but what exactly does it mean? And how do I get rid of the message?
AMD 3000 64
msi k8t NEO-FIS2R
Hitachi SATA 80gb (using via controller, not promise)
POWMAX 400
Diamond GF5200 128MB AGP
Kingston 2.5latency 512 (256x2) ddr400
Also, I built an ASUS version, not 64 but still AMD 3000, everything else is pretty much the same, and the Asus build smokes the MSI build. Anyone have an idea why?
ASUS deluxe a7n8x-e
CORSAR32X64 VS256MB400
HD 80GB Hitachi SATA 8MB
ALBATRON GeForce 128MB FX5200EP
ASPIRE XDREAMER BK WNDW 350W

Quote
Plain and simple, it sucks.
3dmark 2001 se scores with a Barton-core AMD athlon xp 3200+ and 1 GB ram.
GeForce FX5200 A-FX20 128MB DDR
4,650
BFG GeForce FX 5200...2500+ XP Barton with 1GB PC2700 I get 5361.
Gainward GeForce FX 5200...AMD64 3200+ with 1GB PC3200 I get 8286.
They don't suck that bad...not like the GeForce4 MX400s...

ALSA installed but not found.

I'm a new user. Recently I've done an upgrade and had to install OSS for a game and my ALSA driver seems to be completely gone.
# /etc/rc.d/alsa start
:: Restoring ALSA Levels [BUSY] /usr/sbin/alsactl: load_state:1569: Cannot open /etc/asound.state for reading: No such file or directory
[DONE]
so I tried aslactl store to restore the file:
# alsactl store
alsactl: save_state:1502: No soundcards found..
No go...
# ls -l /dev/dsp
lrwxrwxrwx 1 root root 26 2009-10-12 13:30 /dev/dsp -> /dev/oss/oss_hdaudio0/pcm0
# aplay -l
aplay: device_list:223: no soundcards found...
# alsamixer
cannot open mixer: No such file or directory
However, alsa-lib, alsa-utils, alsa-oss, alsa-plugins. I even tried to install a bunch of alsa-related stuff from AUR as well. I don't know why its not being found. I'm really hating how OSS can only manage 1 sound source.
pacman -S alsa-lib alsa-oss alsa-plugins
warning: alsa-lib-1.0.21.a-1 is up to date -- reinstalling
warning: alsa-oss-1.0.17-1 is up to date -- reinstalling
warning: alsa-plugins-1.0.21-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (3): alsa-lib-1.0.21.a-1 alsa-oss-1.0.17-1 alsa-plugins-1.0.21-1
Total Download Size: 0.00 MB
Total Installed Size: 2.67 MB
Proceed with installation? [Y/n] y
checking package integrity...
(3/3) checking for file conflicts [#####################] 100%
(1/3) upgrading alsa-lib [#####################] 100%
(2/3) upgrading alsa-oss [#####################] 100%
(3/3) upgrading alsa-plugins [#####################] 100%
Install jack-audio-connection-kit, libsamplerate, ffmpeg
or pulseaudio to get their respective plugins working
Also, it shows up in lspci along with many other things
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B
Flags: fast devsel, IRQ 22
Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Anyone have any suggestions?
Thanks
edit: added more info
Last edited by BowlSmoker (2009-10-12 18:14:56)

I am having the exact same problem, I have no idea how to fix it or what it going wrong. Any help would be appreciated.
There is only one difference with my problem
ls -l /dev/dsp
ls: cannot access /dev/dsp: No such file or directory
/dev/dsp does not have a soft link

Solaris 10 Install CD Not Found...

Similar Messages

Maybe you are looking for