Solaris 10 Openssh, Apache2 combined online but not....

Hi
I conf Apache2 and ssl on my new Solaris 10 install.
Folowing problem is: All service is enabled trought svcsadm. I can't get apache welcome page. This is my dev server Enterprise 3500 on my local net.
Settings
ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
hme0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.10.51 netmask ffffff00 broadcast 192.168.10.255
        ether 8:0:20:aa:8a:1
hme1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
        inet 192.168.10.50 netmask ffffff00 broadcast 192.168.10.255
        ether 8:0:20:aa:8a:1
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
        inet6 ::1/128
hme0: flags=2000801<UP,MULTICAST,IPv6> mtu 1500 index 2
        inet6 fe80::a00:20ff:feaa:8a01/10
        ether 8:0:20:aa:8a:1
hme1: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 3
        inet6 fe80::a00:20ff:feaa:8a01/10
        ether 8:0:20:aa:8a:1I give different name when I made new install of Solaris 10 to hme1 and hme0. It's that OK?
Why networks card have same MAC-adress???
SSH
Have created key's. But I can't login from another comp. from my network.
svcs -l ssh
fmri         svc:/network/ssh:default
namn         SSH server
aktiverad    sant
status       online
next_state   none
state_time   s��n 16 apr 06 kl 22:47:24 CEST
logfile      /var/svc/log/network-ssh:default.log
omstart      svc:/system/svc/restarter:default
contract_id 49
dependency   require_all/none svc:/system/filesystem/local (online)
dependency   optional_all/none svc:/system/filesystem/autofs (online)
dependency   require_all/none svc:/network/loopback (online)
dependency   require_all/none svc:/network/physical (online)
dependency   require_all/none svc:/system/cryptosvc (online)
dependency   require_all/none svc:/system/utmp (online)
dependency   require_all/restart file://localhost/etc/ssh/sshd_config (online)
MYSQL
# svcs -l mysql
fmri         svc:/application/database/mysql:default
namn         MySQL RDBMS 4.0.15
aktiverad    sant
status       online
next_state   none
state_time   s��n 16 apr 06 kl 22:47:09 CEST
logfile      /var/svc/log/application-database-mysql:default.log
omstart      svc:/system/svc/restarter:default
contract_id 33
dependency   require_all/none svc:/system/filesystem/local (online)
Apache
I folow this gudie http://meljr.com/~meljr/ssl_cert_Sol10.html
# svcs -l apache2
fmri         svc:/network/http:apache2
namn         Apache 2 HTTP server
aktiverad    sant
status       online
next_state   none
state_time   s��n 16 apr 06 kl 22:47:11 CEST
logfile      /var/svc/log/network-http:apache2.log
omstart      svc:/system/svc/restarter:default
contract_id 25
dependency   require_all/error svc:/network/loopback:default (online)
dependency   optional_all/error svc:/network/physical:default (online)What this mean "require_all/error" is something missing....?
Please some help...I am new on Solaris..
Regards
IQAPPS

If you want 2 IP's on the same subnet, the usual practice is to put them on the same physical ethernet using virtual interfaces hme0 and hme0:1
You can put them on separate physical interfaces as you have done, but its not usually done unless there a specific requirements to do so.
If you do want to put them on different physical ethernets, as you have found out, you will have problems since by default all the interfaces have the same MAC address. You can usually change this by setting an eeprom variable.
I think its "local-mac-address".

Similar Messages

How to publish iWeb online but not through iCloud but someone else?

How to publish iWeb online but not through iCloud but someone else?
Mybe Google or woodpress,
Or publish iWeb online with iCloud WITHOUT upgrading Lion?

iWeb will still be around but as Jeff pointed out if you want a blog with visitors comments you should consider converting your iWeb blog to WordPress. Rage Software has created an applicaiton that will convert your current iWeb blog w/visitor comments to a Wordpress blog. You can get the application here: Convert Your iWeb Blog to a WordPress Blog.
If you don't have visitor comments then the iWeb blog will continue to work for you on a 3rd party FTP server.
If you have photo pages in your website with the accompanying slideshow you'll need to read the following:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.
OT

Trying to lock out Solaris 11 non-root users but not working-

Hi,
We are trying to lock out non-root user after 5 unsuccessful login attempts by editing the policy.conf file but it's not working..It's working in the global zone but not in the non-global zones. Is there something else we need to do?
This is Solaris 11 with Solaris 11 NGZs.
kind regards

It works exactly the same way in the global and non global zone cases. This code is 100% userland so it doesn't mater if it is running
in a global or non global zone.
Note that you do need to configure policy.conf in both the global and non global zone.
Are both configured similarly with respect to nameservices ?
Currently we only support lock_after_retries for the local files nameservice.

HT1800 how do I install a wireless printer to my iMac that doesn't have a cd drive. It comes with a cd but I can't use it. I have tried to download the driver online but not sure what to do now...

I have a Brother HL-2270DW that is wirless and it comes with an installation CD. But I don't have an external CD DRive for my imac. I have downloaded the driver online but I don't what to do from here. I suppose if I had the cd drive it would take me through it step by step but I can't.

You posted in the OS 10.3 (pre year 2000) forum instead of the OS 10.8 forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

HP Photosmart Wireless B109n-z will come online but not STAY online!

In a nutshell: I own a HP B109n-z. It will connect on power on as it should to my main wireless access point and print from all computers on the network. After a while the printer will go offline. Web-interface cannot be reached, the printer will not respond to ping.
To remedy the situation, turn of printer, turn on again on front switch. Printer will connect to wireless AP and print in less than a minute. The printer is currently located 30 miles away from me, so hitting on/off is not an option for me. This printer needs to just STAY online as long as access point and power is supplied. I am - as I write this - connected via remote desktop to my Win 2k8 server, and I get no response when I ping the printer - however everything else on the network works, and I actually see the printer in my routers wireless section. It is just if the printer is in some kind of hibernation.
I've read several topics about the HP Photosmart Wireless B109n-z that goes offline and it seems to be a general problem with this printer. It also seems to be a generel answer from HP forum operators to ask what router the user is using - and then stating that that particular brand of router is flawed and the newest firmware should be installed, then try again. That move seems like a stall to me.
Please - dearest HP support - do NOT give me that answer. EVERYTHING else in my network setup works, and works ALL the time, every single day. The problem, whatever it is, clearly resides in the printer itself. All my automated daily network operations with regards to back-up and file distribution and automatic emails, plus remote operations have all been running every day for more than a year without needing maintenance. The frustration with this issue is immense.
Please help me get this solved once and for all. Help me make the printer stay online until I turn it off.
My setup:
1: Main ADSL-modem/router/wireless accesspoint is some kind of Sagem - and I can't do anything about that, it is provided by the only ISP that operates in the area (I live in Denmark). Don't know what box it is - but it uses 'Fast3504_5AD038' firmware. Broadcasts SSID, using 802.11 b + g and WPA/WPA2, running DHCP
HP B109n-z have static IP outside of DHCP range, and is placed ind same subnet as the rest of the network.
2: Attached hardware to entire network:
One Windows Server 2008 R2 Enterprise Dell machine cabled to the Sagem box. Running 24/7/365, controlled externally using MSTSC remote desktop every day.
One Linksys WRT54GL router cabled to the Sagem box, running DD-WRT firmware, used as a secondary wireless acces point with its own SSID. Provides wireless internet acces 24/7/364 for laptops and smartphones in the house.
Three HD digital TVs cabled to the Sagem box, receiving IP-tv signal (individually, not same channel/signal)
2 phonelines (sharing number)
The WRT54GL have a cabled connection to a Windows 7 X64 workstation, providing internet access via cabled onboard LAN from workstation and cabled connection from WRT54GL to Sagem box. Used every day, most of the day.
3 laptops connects wireless to the WRT54GL access point, which in turn - as said before - is cabled to the primary Sagem box, used every day, most of the day
HP B109n-z connects to the wireless access point given by the Sagem box without problems.
All three TVs are connected with CAT-6 cable, all other cables are CAT-5
Best regards,
A danish person

OK, I'll give it a shot, but ISP-supplied routers can cause lots of problems - search these forums and you will see that.
Let's set a static IP at the printer, which includes directing the printer to the DNS server, which is sometimes helpful:
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
If this does not work, you can add a "standard" router (Linksys, Netgear or such) to your ISP router and turn off the ISP's wireless. I have seen this work well many times. You can turn the ISP's DHCP off as well, but you may have to open a port to the "standard" router. Attach all devices to the "standard" router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

In Stock Online but not in stock in any stores and not available for Delivery?

I am having an issue and I can't understand it. Recentally I have been searching everywhere for an affordable copy of "Fire Emblem Radiant Dawn." I come across Bestbuy's online store and there it is pre owned for 29.99$!! I was so excited to finally have found it. The website says that the game is available and in stock so I go to order it. But to my dismay not a single store in South Carolina has the game in stock, and the game is not available for shipping. So I came to the forums first since I am at work, so I want to know is there anyway I can get my hands on this game from Bestbuy? Can I have one branch send it to another or have it delivered to me or am I stuck brooding over the fact that I can't get a hold of this game? I would appreciate the help but this issue has really disapointed me and killed my rush and excitement tonight.

I took a look at that item on BestBuy.com and it seems that is a Pre-Owned game. Clearly from the name, this game must be previously owned before Best Buy can re-sell the item, so not every single store will have a copy. Unfortunately, if the Store Pickup option isn't showing any inventory in nearby stores, it means that no Pre-Owned copy is available to ship. Online orders pull from the district/territory warehouse(s), so it will be much harder to get a copy of this game than a normal item which is regularly stocked. Perhaps a Forum Moderator can shed more light onto this situation or offer a solution I haven't mentioned. Hope you can get your hands on a copy of this game!!

Solaris process memory usage increase but not forever

On Solaris 10 I have a multithreaded process with a strange behaviour. It manages complicated C++ structures (RWTVal or RWPtr). These structures are built from data stored in a database (using Pro*C). Each hour the process looks for new informacion in database, builds new structures on memory and it frees older data. But, each time it repeats this procedure, the process memory usage increases several MB (12/16MB). Process's memory usage starts from 100M until near 1,4G. Just to this point, it seems the process has memory leaks. But the strange behaviour is that after this point, the process stops to continue growing up anymore. When I try to look for memory leaks (using Purify tool) the process doesn't grow up and no significant leaks were showed. Did anyone found a similar behaviour or can explain what could be happening?

markza wrote:
Hi, thanks for responding
Ja, i guess thats possible, but to do it all one row by row seems ridiculous, and it'll be so time consuming and sluggish surely. I mean, for a months worth of data (which is realistic) thats 44640 individual queries. If push comes to shove, then I'll have to try that for sure.
You can see by the example that I'm saving it to a text file, in csv format. So it needs to be a string array, a cluster won't be of much help I dont think.
The only other way I can think of is to break it up into more manageable chunks...maybe pull each column separately in a for loop and build up a 2D array like that until the spreadsheet storing.
You only do 1 query, but instead of Fetching All (as the Select does) you'll use the cursor to step through the data.
You can use Format to String or Write Spreadsheet fire with doubles.
You can break it down to get the data day by day instead of a full month at once.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

HP 1102W online but not found as a printer

The printer connects to my wireless network, but is not listed as an available bonjour printer to install.

Hello jgroenewald,
Thanks for the question. Based on what you stated, it seems like you are having trouble using a Bonjour enabled printer. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Troubleshooting printer issues in OS X
Thanks for using Apple Support Communities.
Cheers,
Mario

When AE distributes IP no internet, otherwise PB gets online but not PC

My AE is flashing amber, but my 15"PB is online no problem. My roommates both have pcs, and neither can get internet from the AE, but they can connect and authenticate the WEP. When I choose to distribute using 192... (or the other number schemes) the internet stops for everyone, including my PB and the AE assigns an ip of 192.168.1.1 to itself (when working for PB:169:254:128:58). I am in San Diego, CA using Warner (which is just a DHCP service, no special setup needed for the cable service)
Thanks for any help,
Scott

Are you using a cable modem?
Your cable modem has become associated with the MAC Address of the computer, you need to blank the cable modem and then connect the Airport base station.
Power everything down and unplug the cable modem, wait at least 30 minutes, you may need to even wait overnight.
Then connect the Airport base station and see if that works.
iFelix

Windows 8 Creative Cloud says You've been signed out, I can sign in online but not on Creative Cloud Desktop App???

My work has 5 seats of CC, I know all are signed out of. I have a new PC and logged in, downloaded CC Desktop app, and it signs me out right away. Not letting me sign in. Same thing with Outlook 2013, it will not pickup my credentials or server. I have installed it over 100 times. Wanted to mention this in case it was a security setting or something???
Any help. Greatly appreciated!

You are no longer signed into your Creative Cloud applications

Login works online, but not in the most up to date...

Hi,
I have multiple accounts and none work on my program (7.2.0.103, OS: Windows 7), while I can log in online without a problem. Any ideas?
Thanks,
b

Hi
http://manuals.info.apple.com/en_US/OpenDirAdmin_v10.6.pdf
Page 60.
Replicas have read only access to the Master and they can't write data 'back up' to the Master. The relationship is top-down only. Master and Replica(s) must all be exactly the same OS as well as using the same NTP Server. If the Master is 10.6.5 and the Replica is 10.6.7 the Master/Replica relationship will be broken. The relationship is also broken if the Replica's LDAP database is newer than the Master's.
You should seriously consider promoting the existing Replica to an OD Master role. This will ensure the most current LDAP database is preserved. The old Master should be demoted and re-promoted to become the new Master's Replica.
Consult the Admin Manual (as linked above) as it does give relevant guidance on what to do in situations like yours.
HTH?
Tony

Buy application online but not yet completely downloaded yet it billed me already

I just bought an application (photo editor extreme US$0.75 my playbook gone out of charge and turned off, when i charged it to see if the download paused or through there is no photo editor extreme had been downloaded yet ive received an email stating ive been billed for downloading the said application pls help me on how to download it again without being billed again. Thanks!

For future reference, look over at this thread, where it was confirmed this fix should work for cases like this.
Anyone else reporting this, please add a note to that thread if this fixes it. RIM needs to deal with this issue, at least by ensuring their own staff are aware of it and educated. Otherwise they strangely tell the users to contact the developers, as though we have the least idea what's happening, or any control over it. :-)
Peter Hansen -- (BB10 and dev-related blog posts at http://peterhansen.ca.)
Author of White Noise and Battery Guru for BB10 and for PlayBook | Get more from your battery!

I can sign into icloud online but not on the icloud control panel

Hi,
I am new to Apple. I decided to start with an Ipad, and love it. However, I cannot figure out an issue I am having. I have Windows 7. The icloud control panel worked without issue until a few weeks ago. I have an ipad 3. I have reset my password a few times, but it doesn't fix the issue. I have reinstalled the software, and still have the issue. Any suggestions?

in that case you need the help of Apple Support.- only they will be able to help you. See this webpage on how to contact Apple Support in your country: There are either telephone umbers given or an email form:
Apple ID: Contacting Apple for help with Apple ID account security
Explain, that you need help with an account security problem.
You can also try to email the iTunes Support using this form: https://ssl.apple.com/emea/support/itunes/contact.html

Skype online but not Safari

Neither of my 4 browsers can load a page but skype is working fine......any idea what could cause this? Computer is connected via ethernet. Cannot connect to airport.

Hi,
Login to another user account on your Mac. Try Safari there. if you can't access the web with Safari there then there could be problems with the startup disk.
You can check the startup disk using the Disk Utility app located in /Applications/Utilities
If Disk Utility reports errors, you need to boot from your install disc to make repairs.
Using Disk Utility to verify or repair disks
Please click *My Settings* on the right side of this window and tell us which Mac you are using and which Mac OS X is installed. That way you have a forum profile setup.
CMCSK suggested you repair the startup disk back in Sept: http://discussions.apple.com/message.jspa?messageID=12208497#12208497
Carolyn

Testing local is fine, but online is not working

I made a gallery and tested locally (inside flash mx
environment) and it's working great. It can connect the database
(my web hosting is mediatemple) with no problem. Sending and
receving queries are okay too.
But when I upload this file online (swf), somehow it doesnt
work at all.. it returns an error message when loading the php.
I do retrieveXML.onLoad = function (success), it returns
false.
I'm pretty sure the path to php is correct because I sue the
absolute path.
Any idea?
For your reference:
http://ivankandi.com/fusion/retrieve.swf
Thank you

Sorry but with that limited bit I can't give you much help.
One thing that is strange is to just post it as a swf. I don't know
if that is part of the problem or not. But generally it should be
embedded in an html page. That is the first thing that I would try.
It might also allow the browser to catch an error message –
or maybe not.
The other frequent cause of "it works in the testing
environment, but not online" is that you haven't coded it properly
to wait for external resources to load completely.
I'm not sure exactly which class you are using, but does your
code include myXML.onLoad or some such?

Solaris 10 Openssh, Apache2 combined online but not....

Similar Messages

Maybe you are looking for