Solaris-x86 mount fat32 partition, the partition max size limit?

solaris10 x86, laptop, 10G FAT32 partition for windows & x86 exchange data.
the fat32 partition mount as normal, can be read fine.
but write some file by x86, that can not find by windows.
anyboy know did the solaris-x86 mount fat32 partition, the partition max size limit? or no limit, why this problem occur?

Mounting Windows partition in Solaris
The easiest way to share data now is to do it through a FAT32 partition. Solaris
recognises it as partition of type pcfs. It is specified as device:drive where drive is
either the DOS logical drive letter (c through z) or a drive number (1 through 24).
Drive letter c is equivalent to drive number 1 and represents the Primary DOS partition
on the disk; drive letters d through z are equivalent to drive numbers 2 through 24,
and represent DOS drives within the Extended DOS partition.Syntax is
mount -F pcfs device:drive /directroy-name
where directory name specifies the location where the file system is mounted.
To mount the first logical drive (d:) in the Extended DOS partition from an IDE hard
disk in the directory /d use
mount -F pcfs /dev/dsk/c0d0p0:d /d
You can use mount directory-name after appending following line is in
/etc/vfstab file
device:drive directory-name pcfs no rw
for example
c0d0s0:c /c pcfs no rw
If your windows partition like the following means
C: - NTFS, D:-FAT32, E:-NTFS, F:-FAT32
Then you can only mount D, F not C & E.
Mounting D Drive:
mount -F pcfs /dev/disk/c0d0p0:c /mountpoint
Mounting F Drive
mount -F pcfs /dev/disk/c0d0p0:d /mountpoint
The driveletter only for fat not including other file systems (ntfs or any linux filesystems).

Similar Messages

HotSpot(TM)64-BitServer VM warning: (benign)Hit CMSMarkStack max size limit

Hi I am getting the CMSMarkStack max size limit. Could anyone explain why i am getting that.
61083.003: [GC 61083.003: [ParNew: 523392K->0K(523840K), 0.1802670 secs] 2866168K->2364464K(4193856K), 0.1804250 secs]
61087.107: [GC 61087.107: [ParNew: 523392K->0K(523840K), 0.1970010 secs] 2887856K->2396761K(4193856K), 0.1971990 secs]
61087.349: [GC [1 CMS-initial-mark: 2396761K(3670016K)] 2408426K(4193856K), 0.0330660 secs]
61087.382: [CMS-concurrent-mark-start]
61089.382: [CMS-concurrent-mark: 2.000/2.000 secs]
61089.382: [CMS-concurrent-preclean-start]
61089.637: [CMS-concurrent-preclean: 0.253/0.255 secs]
61089.637: [CMS-concurrent-abortable-preclean-start]
CMS: abort preclean due to time 61090.703: [CMS-concurrent-abortable-preclean: 0.224/1.067 secs]
61090.721: [GC[YG occupancy: 336074 K (523840 K)]61090.721: [Rescan (parallel) , 0.4475020 secs]61091.169: [weak refs processing, 1.8464740 secs]Java HotSpot(TM) 64-Bit Server VM warning: (benign) Hit CMSMarkStack max size limit
[1 CMS-remark: 2396761K(3670016K)] 2732836K(4193856K), 2.5285500 secs]
61095.521: [CMS-concurrent-sweep-start]
61104.793: [CMS-concurrent-sweep: 9.271/9.271 secs]
61104.793: [CMS-concurrent-reset-start]
61104.821: [CMS-concurrent-reset: 0.029/0.029 secs]
61110.338: [GC 61110.338: [ParNew: 523392K->0K(523840K), 0.6183310 secs] 2133391K->1628588K(4193856K), 0.6184950 secs]
61162.032: [GC 61162.032: [ParNew: 523392K->0K(523840K), 0.2259220 secs] 2151980K->1662904K(4193856K), 0.2261040 secs]
61171.154: [GC 61171.155: [ParNew: 523392K->0K(523840K), 0.1890640 secs] 2186296K->1686907K(4193856K), 0.1892200 secs]
regards
R.Sriram

"errno = 28" is an error code from the OS which means "No space left on device" this could indicate you don't have enough swap space.
I suspect you are using too much memory even when you don't think you are.
I would start with a simple "hello world" program and increase the memory until you get an error. If you can't run even a hello world program you have a serious system error.

What's the sga max size for a 32bit windows server?

Hi,
I have a 32bit Windows Server with 16G of RAM... What is the SGA max size that I can setup?

Depending on your version of Windows and your version of Oracle there are methods to increase the usuable memory available to Oracle including the MS \3GB and \PAE switches and the AWE memory extention feature.
Oracle has notes on the subject:
Windows Memory Configuration: 32-bit and 64-bit 873752.1 plus notes 46053.1 and 46001.1
How to use Very Large Memory, higher than 4Gb on Windows 2003 32 bit #342080.1
HTH -- Mark D Powell --

SGA Max Size limit?

Hi,
I have Fujitsu mid range Server with 16gb RAM and 64 bit Windows Server 2003,10g R2 db installed, current i have SGA size 4gb..
What is SGA max size limit????
One of my report runs in 24 seconds...*will this issue b solved increasing the SGA size upto 10,12 gb?*

Yes,
You can also go for a 10046 event tracing...
ACCEPT sid PROMPT 'Enter SID: '
ACCEPT serial PROMPT 'Enter SERIAL#: '
ACCEPT action PROMPT 'Enter TRUE or FALSE: '
EXEC sys.DBMS_SYSTEM.SET_SQL_TRACE_IN_SESSION(&sid,&serial,&action);
prompt Trace &action for &sid,&serial
exec DBMS_SYSTEM.SET_EV(10,20,10046,12,”);
Then you can check your dump file and see whcih events are higher......
For Eg. content could be like:
=====================
PARSING IN CURSOR #6 len=107 dep=1 uid=44 oct=6 lid=44 tim=1621758552415 hv=3988607735 ad='902c07a8'
UPDATE rn_lu_lastname_loca set entr_loca_id_plz14 = translate(entr_loca_id_plz14,'_','-') where rowid = :b1
END OF STMT
PARSE #6:c=0,e=981,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=0,tim=1621758552403
BINDS #6:
bind 0: dty=1 mxl=32(18) mal=00 scl=00 pre=00 oacflg=13 oacfl2=1 size=32 offset=0
bfp=10331d748 bln=32 avl=18 flg=09
value="AAAHINAATAAAwTTABV"
WAIT #6: nam='db file sequential read' ela= 12170 p1=6 p2=197843 p3=1
WAIT #6: nam='db file sequential read' ela= 8051 p1=14 p2=261084 p3=1
WAIT #6: nam='db file sequential read' ela= 7165 p1=19 p2=147722 p3=1
WAIT #6: nam='db file sequential read' ela= 9604 p1=19 p2=133999 p3=1
WAIT #6: nam='db file sequential read' ela= 6381 p1=19 p2=133801 p3=1
EXEC #6:c=10000,e=45750,p=5,cr=1,cu=10,mis=0,r=1,dep=1,og=4,tim=1621758598343
FETCH #5:c=0,e=357,p=0,cr=5,cu=0,mis=0,r=0,dep=1,og=4,tim=1621758598896
EXEC #1:c=30000,e=116691,p=36,cr=35,cu=10,mis=0,r=1,dep=0,og=4,tim=1621758599043
WAIT #1: nam='SQL*Net message to client' ela= 5 p1=1413697536 p2=1 p3=0
WAIT #1: nam='SQL*Net message from client' ela= 2283 p1=1413697536 p2=1 p3=0
Lines that start with WAIT
len Length of SQL statement.
dep Recursive depth of the cursor.
uid Schema user id of parsing user.
oct Oracle command type.
lid Privilege user id.
ela Elapsed time. 8i: in 1/1000th of a second, 9i: 1/1'000'000th of a second
tim Timestamp. Pre-Oracle9i, the times recorded by Oracle only have a resolution of 1/100th of a second (10mS). As of Oracle9i some times are available to microsecond accuracy (1/1,000,000th of a second). The timestamp can be used to determine times between points in the trace file. The value is the value in v$timer when the line was written. If there are TIMESTAMPS in the file you can use the difference between 'tim' values to determine an absolute time.
hv Hash id.
ad SQLTEXT address (see v$sqlarea and v$sqltext).
Lines that start with PARSE, EXEC or FETCH
#n n = number of cursor
c cpu time
e elapsed time
p physical reads
cr consistant reads
cu current mode reads
mis miss in cache (?)
r rows processed
dep recursive depth
og optimizer goal
tim time Content

Anybody know how to increase the plugin file size limit in Photoshop CS6 to greater than 250 mb?

Can anyone tell me if it is possible to increase the plugin file size limit in Photoshop CS6 to greater than 250 mb and how to do it? Can plugins running in PSCC handle larger file sizes than CS6?

Wow, thanks for getting back to me!!
I am running the latest version of HDR Soft Photomatix Tone Mapping Plug-In - Version 2.2 in Photoshop CS6 on a fully loaded solid state MacBook Air. When I attempt to process files exceeding 250 mb with the plugin I get an error message and the plugin will not work. The plugin works fine with anything south of 250 mb. I have also optimized the performance settings in CS6 for large file sizes.
The standalone version of HRD Soft’s Photomatix Pro easily processes files well in excess of 300 mb.
I have contacted Photomatix support and they say that 250megs is simply the max file size that Photoshop will allow to run a plugin with.
So is there any setting that I’m overlooking in Photoshop CS6 that will allow me to process these large files with the plugin? Or if there is indeed a file size limit for plugin processing in CS6 is the limit higher in CC?
Thanks in advance for your help.

Any workarounds for the 2880 pixel size limit?

I have a client that would like a Flash animation that's 5440
pixels wide, to span 3 widescreen monitors for a tradeshow
presentation. Flash won't let me make the stage any bigger than
2880 - does anyone know any ways around that limit?
I Googled it and found out that you used to be able to scale
the SWF beyond 2880 in an HTML file, and it would show well using
Flash Player 7, but apparently that trick no longer works in
Players 8+.
Any other ways to make a single SWF that can span 3 large
monitors?
Thanks in advance,
- Frank

The problem here is the legacy flash document size constraint of 2880 x 2880 pixels. Why is this limitation still in place? Most screen have landscape orientation and we have this square constraint that turns out to be a waste if you are developing for larger screen displays and anything that is 4:3 or 16:9. Something does not add up here. What if someone needs to make a dual wide screen HD show that measured 3840 x 1080 pixels? We can do setup documents at 3840 x 1080 pixels in PowerPoint, PDF, Silverlight (at least this is what I have read regarding Silverlight), but not in Flash. Why not?
If Flash is a platform… then it needs to spread its wings a bit and embrace all the potential uses that are non-web. Flash represents multimedia delivery to millions, but shackling it to the 2880 x 2880 pixel limitation for a document size is problem for many people now and looming for those working toward have the flash engine as a core component in media delivery. At least give us a dual Wide screen monitor resolution of 3840 x 1080 pixels instead of a square of 2880 x 2880 pixels – which no one really uses (at least I have not seen any sqaure screens lately). Hey, if Adobe decided to shave off on the unused pixels from the 2880 height (2880 – 1080 = 1800) of the format you get an additional 1800 pixels that could applied where it is needed – to the width of the document size… giving us a 4680 x 1080 pixel document. This could then be used for immersive simulation, game situations, and real-world wide-screen experiences.
Sorry I don't have an answer, just the same question. "Any workarounds for the 2880 pixel size limit?"

Export/Import-SPSIte :- What is the max size limit that can be moved using this command??

Export/Import-SPSIte :- What is the max size that can be moved using this command??

I assume you ment Export-SPWeb not Export-SPSite command.
There is no known limitations in file size, except the compression file size that is set to 24MB by default. If you exceed 24MB, the cmp file will be splitted into several files. You can change the default 24MB value up to 1024MB, using the -compressionsize
parameter.

WIDE-SCALE CALL FOR INPUT: The NSS 8TB Size Limit

NOTE: This thread is purposefully double-posted in the OES:Linux and OES:NetWare storage forums.
Like most of you -- I'm just a Novell customer. While I do not represent Novell in any official capacity, this call for information has been encouraged by Novell's OES team.
During this week's OES2SP3 Beta conference call, a topic was brought up again regarding the aging size limit of the NSS file-system.
Quite simply the current NSS file system size limit of 8TB is too small for modern and emerging needs. The reality is that customer data is trending larger all the time. A failure to act quickly will eventually mean the obsolecense of this file-system and apathy in the customer base.
Novell will be monitoring this thread. If sufficent interest can be documented then Novell could more easily marshall the needed internal resources to make this happen sooner rather than later.
WHAT THIS THREAD IS -NOT- INTENDED TO BECOME
- A discussion of how one could use DFS or other techniques to mitigate NSS' size constraint.
- A string of suggestions for alternative file-systems such as NTFS or Posix-based one like XFS, BTRFS, EXT4
- A debate on why people should not want a larger-than-8TB file-system. That debate is effectively over -- almost every major player in the file-system space is doing anything from 64TB into the Exabyte range (XFS, NTFS, others).
WHAT THIS THREAD IS INTENDED FOR
- A tally of other Novell customers who DO see the need and would prefer to keep this data on NSS if it could accomodate it. Your post can be as simple as: "This is important to us, too!" Also helpful, though not required, would be a brief statement or case-study of what your needs would look like (types of data, overall size and quantity of files).
On the beta calls, several of us have been vocal supporters for this change. We now hope that by casting a wider net that we can find others who perhaps have been suffering in silence.

Originally Posted by Elfstone
NOTE: This thread is purposefully double-posted in the OES:Linux and OES:NetWare storage forums.
Quite simply the current NSS file system size limit of 8TB is too small for modern and emerging needs. The reality is that customer data is trending larger all the time. A failure to act quickly will eventually mean the obsolecense of this file-system and apathy in the customer base.
I have a couple instances where the 8TB limit is "inconvenient," but all are for comparatively small numbers of large files. As a practical matter the bottlenecks in the metadata are reached far in advance of the storage limits. For example, how would a NSS volume perform with 100,000,000 files on it? This is the biggest issue.
So sure, there are things which could be done to expand NSS. As a practical matter the easiest would be to support larger block sizes. So 8TB becomes 16, becomes 32, ... all the way to 128TB. I assume 128TB would handle your needs. Of course how you back up and restore 128 TB in less than the age of the Universe, that's up to you.
-- Bob

How to solve the mail box size limit for thunderbird

Hi,
I tried to do archiving for my mails but everytime it will prompt me mail box size limit has reached and ask me to delete older mails and the problem is my HDD is more than enough to contain those archives so am asking if there's anything which i can get this solved for good?
Regards.
Andrew Koh

Background info:
Emails are downloaded and stored in the Inbox file written one after the other.; they are not stored as individual emails in their own file. So the Inbox folder in the FolderPane is actually a file.
Any email you delete is marked as deleted and from your point of view it disappears from eg: Inbox and reappears in 'Deleted' folder. In reality it is still in the Inbox taking up space, marked as deleted and hidden from view. Compacting removes all traces of 'marked as deleted' emails and reduces the file size. If a file becomes corrupted and you compact that file you may lose good emails. this can occur if you do not compact on a regular basis.
It is wise to create a backup on a regular basis.
* http://kb.mozillazine.org/Profile_backup
'''RE: Archiving'''
Archiving is not a backup. It is a means of storing old emails in smaller files accessible within your Profile mail account. So releasing space in other folders.
If you have been archiving all emails into just one Archives folder, then you are putting all of your emails into one file.
Did you set up Archive Options?
See info at these links:
* https://support.mozilla.org/en-US/kb/archived-messages
* http://kb.mozillazine.org/Archiving_your_e-mail
Did you choose to archive by month and retain folder structure?
By using these options, if you archived last months Sent emails and say you had another folder called 'Family' and you did the same, they would be stored as follows into smaller files, so you should not reach a mailbox limit.
There will be no emails stored in the actual 'Archives' folder, nor the '2014' or '2014-5' folders, they will be in the relevant folder name - see below
eg:
> Archives
>->2014
>->->2014-05
>->->->Family (one month of emails here)
>->->-> Sent (one month of emails here)
Suggest you do the following and in this order:
* create a backup
* delete any emails not required
* compact folders
* set up Archive options and organise emails as shown above, so that emails are only in that months eg: Sent archive Folder.
* Create another backup when everything is organised.

Redirecting the message Max User Limit Reached to page

Hi Gurus,
We have set a user limit parameter in portal to limit the no of users logging into portal at a time...This parameter was set for each server node.
Now as soon as the limit reached on any of the sap server, then that triggers the message to the new user that "MAX_USER_LIMIT_REACHED".
We wanted to redirect this message/page to a different page where we say that user has to try after 15 minutes as the system is loaded now....
Can Anyone help me in knowing how to get this message/page redirected.
Regards,
Radhe.
Edited by: radhe# on Mar 12, 2010 6:56 AM

Hi I am not sure at all .....though I do know IMgur means an Internet Image sharing website....Are you actually trying to log into My O2? http://www.o2.co.uk/myo2Maybe you need to contact O2 and ask them to look at reprovisioning your account. Its the only other thing I can think of. I presume you have rebooted your phone numerous times?http://www.o2.co.uk/contactus

CF10 VFS Max Size Limit?

It there a maximum amount of Ram that can be allocated the the virtual file system? When I specify more than 1 GB size, the system returns a negative number for the remaining free space, and any attempt to store a file resuts in storage limit exceeded errors.
I've been unable to locate much detail about the VFS configuration via web searches. Any details are appreciated.
Ronnie

AustinValley wrote:
It there a maximum amount of Ram that can be allocated the the virtual file system? When I specify more than 1 GB size, the system returns a negative number for the remaining free space, and any attempt to store a file resuts in storage limit exceeded errors.
Well, you will also get that when you have $25 in your pocket, but spend $32. It is easy to find out how much memory you have. Search for Coldfusion java.lang.Runtime on the web. You will find something like
<cfscript>
rt = CreateObject("java","java.lang.Runtime").getRuntime();
memory = StructNew();
memory.freeAllocated = rt.freeMemory() / 1024^2;
memory.total = rt.totalMemory() / 1024^2;
memory.max = rt.maxMemory() / 1024^2;
memory.used = memory.total - memory.freeAllocated;
memory.freeTotal = memory.max - memory.total + memory.freeAllocated;
memory.heapMemory = memory.used;
</cfscript>
<cfdump label="Memory in MB" var="#memory#">

Voice Memos (on the iPhone 4g) - size limit?

How large (MB) can a Voice Memo be (on the iPhone 4) to be emailed?
Can a 5 minute voice memeo be email (without being shortened) on the iPhone 4?

I think you would need to break it down into 2 sections. I believe you can only send 3 minutes via email.
I could be wrong try doing a voice memo for 5 mins, then try to email it to yourself and see what happens.

URGENT! T30 Hard Drive Replacement - Max Size Limit?

Is there a limit to the GB size that I can use to replace my internal hard drive? The largest I have seen referenced on the lenovo site is 80gb, but I would like to go bigger if it can be supported. Any ideas? I need to get this machine up and running ASAP, as the old drive is completely dead.
Thanks!
Solved!
Go to Solution.

If you can find a brand new 7200rpm PATA laptop drive, such as that Hitachi 7K100, grab it immediately since they're no longer in production...
Personally, I prefer Seagate, but my T43 runs a Hitachi 60GB/7200 rpm...
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

What is the dump file size limit?

Hello all,
Can somebody tell me what is the maximum size of the dump file created by export utility in Oracle? Is there any maximum size applicable to dump file?
Thanks in advance
Himanshu

Hi,
Later Oracle 8.1.6, is no more Oracle limitation on dump file, with restriction 2Gb for full 32-bits OS (32-bit with 32-bit files). The maximum value that can be stored in a file is dependent on your operating system.
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10825/exp_imp.htm#g1040908
Nicolas.

What is the maximum File size Limit in FileUpload UI element in Webdynpro JAVA/ABAP??

I need to upload file with more than 15,000 records, which can exceed more than 1 GB.
Regards,
Sakthi

It's an UI element but apparently only in WDA. I guess SAP hasn't back ported it to WDJ as confirmed by SAP note 1145874. See also SAP note 1303325 regarding limitations of FileUpload control in WDJ. Maybe there is a Java EE solution you could leverage. Another option would be to look into Multiple File Upload of KM or even cFolders.

Solaris-x86 mount fat32 partition, the partition max size limit?

Similar Messages

Maybe you are looking for