Solman_setup document

Hello,
Can any prvide me with doc for initial configuration of solution manager Ehp1 SPS20
Regards,
Sankar

Hi,
Have a look at this blog.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6024691f-4036-2c10-8f86-b09e74678826
this document explains SAP Solution Manager 7.0 Ehp1 Initial/Basic Configuration.
Regards,
Shyam.

Similar Messages

500 Internal server error when running SOLMAN_SETUP

Hi experts,
I'm configuring our solution manager with the SOLMAN_SETUP transaction. In the "initial Configuration", step "j2ee configuration", I click the "Start SLD configuration" button and appears an Internet explorer. After loggin with an administrator user/password, the following error appears:
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.tc.lm.ctc.ccl.wd.TemplateInstallerCompController.getSelectedForSkipActions(TemplateInstallerCompController.java:741)
    at com.sap.tc.lm.ctc.ccl.wd.ScenarioTemplateViewController.actionReexecuteSelectedTemplate(ScenarioTemplateViewController.java:141)
    at com.sap.tc.lm.ctc.ccl.wd.ScenarioTemplateViewController.init(ScenarioTemplateViewController.java:115)
    at com.sap.tc.lm.ctc.ccl.templateinstaller.ScenarioTemplateView.wdDoInit(ScenarioTemplateView.java:106)
    at com.sap.tc.lm.ctc.ccl.templateinstaller.wdp.InternalScenarioTemplateView.wdDoInit(InternalScenarioTemplateView.java:475)
    ... 37 more
See full exception chain for details.
Our solution mananger release is 7.0 EHP1.
Do you have any idea of what the problem is, please?
Thanks and best regards,
Ana

Hi,
The E:\usr\sap\SOL\DVEBMGS00\j2ee\cluster\dispatcher\log\defaultTrace.0.trc last entries are:
#1.5 #000C298948DC001C0000000200000FA80004765AE7A68A56#1256032712398#com.sap.engine.core.configuration##com.sap.engine.core.configuration#######SAPEngine_System_Thread[impl:6]_27##0#0#Error#1#/System/Server#Plain###Exception in ConfigurationChangedListener:
null
=======================================================
java.lang.NullPointerException
+     at com.sap.engine.services.monitor.common.MonitorConfigurationHandler.configurationChanged(MonitorConfigurationHandler.java:1105)+
+     at com.sap.engine.core.configuration.impl.event.PathEventProcessor.sendEvents(PathEventProcessor.java:138)+
+     at com.sap.engine.core.configuration.impl.event.EventProcessor.processEventListeners(EventProcessor.java:121)+
+     at com.sap.engine.core.configuration.impl.event.QueuedEventProcessor.run(QueuedEventProcessor.java:48)+
+     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)+
+     at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:80)+
+     at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:150)+
#1.5 #000C298948DC001F0000001D00000FA80004765B772CB455#1256035120366#com.sap.engine.core.thread.impl6.ThreadManagerImpl##com.sap.engine.core.thread.impl6.ThreadManagerImpl#######Thread[Thread-30,5,main]##0#0#Error##Plain###Unexpected thread activity after interrupt() is executed in shutdown of SAPEngine_System_Thread[impl:6]_ThreadManager:
Thread[SAPEngine_System_Thread[impl:6]_37]
Task: com.sap.engine.core.thread.impl6.ActionObject - Processing Task [classname: com.sap.engine.services.log_configurator.archive.ArchivingThread | toString: [email protected]7a6dd8e1] with classloader [[email protected]2254d@service:log_configurator]#
#1.5 #000C298948DC001F0000001D000003680004765BBE6F6136#1256036315718#com.sap.engine.core.thread.impl6.ThreadManagerImpl##com.sap.engine.core.thread.impl6.ThreadManagerImpl#######Thread[Thread-1738,5,main]##0#0#Error##Plain###Unexpected thread activity after interrupt() is executed in shutdown of SAPEngine_System_Thread[impl:6]_ThreadManager:
Thread[SAPEngine_System_Thread[impl:6]_12]
Task: com.sap.engine.core.thread.impl6.ActionObject - Processing Task [classname: com.sap.engine.services.log_configurator.archive.ArchivingThread | toString: [email protected]3f6a5bcb] with classloader [[email protected]0d8e1@service:log_configurator]#
And the E:\usr\sap\SOL\DVEBMGS00\j2ee\cluster\server0\log\defaultTrace.8.trc entries related to the error message are:
#1.5 #000C298948DC00540000033C00000F1400047684AAF47374#1256212082608#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#SISTEMAS#104##crosol203_SOL_2722150#SISTEMAS#bf43cb51bf0011de8147000c298948dc#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Server/WebRequests#Plain###application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: java.lang.NullPointerException: null
Exception id: [000C298948DC00540000033A00000F1400047684AAF47077]#
Thanks and best regards,
Ana Abad

SOLMAN_SETUP issue

Dear experts,
i have updated my solution manager into EHP1 SP21 (abap + java) via spam/saint + jspm.
Now, i'm trying to make the initial configuration via transaction code SOLMAN_SETUP:
1/ i have created SOLMAN_ADMIN user + initial password + repeat initial password + ZSAP_SOLMAN_ADMIN authorization
2/ Abap configuration setup successfull
3/ J2ee configuration : when login with SOLMAN_ADMIN + initial password, it does not work.
Q1/ How could i resolve it?
4/ i tried to connect with j2ee_admin and it works : the initial client for abap instance is 001 but the user SOLMAN_ADMIN do not exists on this client.
Q2/ Is there any SAP official document to manage this configuration?
thank you very much for your help.
Any suggestion is welcomed.
Best regards,
Pascal.

Hello Gyan,
currently, i need to log with the user SOLMAN_ADMIN but the initial password i have set do not work.
Pascal.
Edit: i have check on the user administration and the user SOLMAN_ADMIN do not exists but it does on the ABAP system.
Do i have to create this user on the user administration (was java)? what authorizations do i have to affect? I though the initial configuration has created SOLMAN_ADMIN.
Edited by: Pascal TRAN on Feb 18, 2010 6:30 PM

SOLMAN_SETUP E:000 error

After the installation of SOLMAN EHP1 with SID SOL, i started the transaction in 001 client SOLMAN_SETUP ,
in the web interface while doing the initial configuration in technical configuration step , i am getting e:000 error .
Before that i was getting "system SOL does not exist" to resolve this i tried to add SOL system under solution manager systems in SMSY .After the addition of SOL in SMSY , it fetched the data after two hours with no message server /port etc and error changes to " No host for system SOL" . i further deleted the SOL system from SMSY and now i am getting E:000 error .
any ideas , anything which i need to configure or check before doing the initial configuration.?

>
indian tiger wrote:
> thanks for discussion , however does i need to check any prerequisite for the initial config as no sap document says to manually define the solution manager system itself in its own SLD.
> Also , when i tried to define the solman system in smsy the message server and instance fields are blank and i am not able to select as the select button in not active ( grey)
The Solman_setup > Initial Configuration creates a logical component and the SID for the solution manager will be included.
If the solution manager system is not defined, how can the logical be assigned to a system? Solution Manager is in the system lanscape. It needs to be defined. If it is not in the SLD, it needs to be defined manually in SMSY.
Keep in mind to make changes you need to be in change/edit mode.
I hope this information is helpful.
Regards,
Paul

SOLMAN_SETUP/ preparation phase 5.1 configure web dispatcher config failed.

Hello
Based on SAP Solution manager 7.1. SPS 11 Fresh install, SOLMAN_SETUP/ preparation phase 5.1 configure web dispatcher config failed.
Error message:
L3 - Failed to reach test WS through System Settings (ICM/HTTPURLLOC):
http://vip.myfqdn.fr:80
L2 - Test WS can be reached through ICM:
http://hostname.myfqdn.fr:8000
SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Solman is located in a DMZ, http/https are configurated in table
HTTPURLOC and load balancer is used to publish http and https url and port redirection
instead of native url « hostname » + default port (80xx / 443xx)
• In DMZ for url
http://hostname.myfqdn.fr:8000/ManagedSetupWS/Config1?style=document
system answer is OK
• In LAN via Load balancer url return KO message
http://vip.myfqdn.fr:8000/ManagedSetupWS/Config1?style=document
Any help will be appreciate.
Regards
Eric

Hi All,
I have resolved the issue with re-setting the password of SM_INTERN_WS & SM_EXTERN_WS.
from step 1.
with no-dispatcher configuration..
Regrads,
Gagandeep Singh

Document on Missing auth. for solman_admin on Solman 7.1

Hello,
This is is information post. Not a problem post.
I documented all the missing Authorizations of user SOLMAN_ADMIN discovered while running CTC Template installer on Solman 7.1 especially during SOLMAN_SETUP.
Click below to download the document:
[Missing Authorizations discovered during execution of CTC template installer for user solman_admin|http://www.box.net/shared/nmqc0rmdp9upmvaj1oao]
-Srikar

Hi Dennis,
This is acceptable. More over data collected during the next completed job,
This is due to other EFWK process still running and its locking the table, whereas the next one started to schedule cant process ends with the the error.
Check the sm12 locks during the time, or also check whether enough DIA workprocess available or not.
refer EFWK_TROUBLESHOOTING - Technical Operations - SCN Wiki under the section Resource Manager Job cancelled and also the sap note 1717403
Thanks
Jansi

CHARM 7.1: subsequent document not created

I currently work on a CHARM implementation on SolMan 7.1 SP3 using a couple of Z transaction types which are all derived from the originals (like SMCR, SMMJ, SMHF). I've copied the original types using the copy tool from the CHARM setup guided procedure in SOLMAN_SETUP.
It actually works without any problems when I create a "Normal Correction" (my transaction type ZMMJ, heavily modified) out of a Request for Change. Once approved and released for development the ZMMJ document is created properly on saving the RfC.
If I try the same procedure for ZMHF (Urgent Correction) or ZMAD (Admin) - which still are plain copies of the SAP original - nothing happens. They are approved, scope contains type "Urgent" or "Admin" as well as status "approved" but in contrary to ZMMJ, a subsequent document is neither displayed in the RfC nor actually created. Anyhow If I switch to the original versions (SMHF, SMAD) there's no problem. Manual creation of ZMHF or ZMAD (without an RfC) is actually no problem either. I've checked the service net for notes but didn't find anything.
Anyone got a clue? Any help highly appreciated!
Cheers,
Andy

Hello Andy,
I solved the issue, specifically by following step 3. of Mr. Vollmer's document:
http://scn.sap.com/community/it-management/alm/solution-manager/blog/2012/10/10/a-non-standard-use-case-creating-defect-corrections-via-the-request-for-change-scope
In any case, please check all 4 steps.
Kindly advise,
Regards,
#solman71today

Error while resetting a cleared document

Hi everyone,
I am getting an error while resetting a cleared invoicing document 'Document xxxxxxxxxxx with origin R4 can not be reversed'. Please guide me how can we reset the clearing of this document.
Thanks and Regards

Hi,
You need to reset all clearing for the corresponding FICA document for the print document.
Reset the clearing for the document no. mentioned in the output for EA13 execution.
You need to reset all the clearing for the document, before reversing the same.
To get all the clearing document, go to DFKKOP table, enter the FICA document no. (for the print document on FPL9). Get all AUGBL documents,
Alternatively, you can go on to FPL9 screen, double click on the consumption document, in the basic data you will see the clearing date (if it is cleared), expand the view their (click on + sign), you will se the clearing document no,
Pass the above clearing document no, to FP07, and once all the clearing is reset for the invoice, you can reverse the corresponding invoice through EA13.
Regards,
Rajesh Popat

Filename in document

Hi all,
Just new to Mac so I've to learn a lot.
How can I insert the filename (semi)automaticly into the document.
I have a template document and save this as .... I want the filename to appear in the document.
Is this possible?? If yes HOW

As far as I know, we are in a forum dedicated to Numbers '09
For Numbers v1.0.2, you take care of what was posted several times:
go to my iDisk:
<http://idisk.me.com/koenigyvan-Public?view=web>
and download for free
For_iWork:iWork '08:forNumbers:paste_thename.zip
and or
For_iWork:iWork '08:forNumbers:paste_thepath.zip
Yvan KOENIG (from FRANCE mercredi 21 janvier 2009 17:56:54)

I can't save downloads to documents folder, only to desktop...

Only desktop saves are allowed. The message states, "Word cannot save or create this file. This disk may be full or write protected..." The disk isn't full, so I'm not sure what to do. I'm having to save everything to the desktop and then move files into document folders in Finder. Any advice on how to save directly to documents or what may be wrong? Thanks so much!.

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Downloads to documents folder fail due to parallel upload

Hi, mobile documents is a great tool that I use to replicate all business relevant documents to mobile clients. However there is one great disadvantage for me. When you download a file that is a bit larger (>1 MB), during the download the client will already start uploading the temporary file. So the download then fails as it cannot convert the temporary file into the final one.
This is something that does not happen for equivalent clients (for example skydrive). Do you think this is something that can be fixed?
thanks,
Heiko

Hi Heiko,
Let me explain again:
You said "uploader locks the file so that it can no longer be changed". For the temporary file it is the downloader which have locked the file. Hence, the impression that file is getting uploaded because it is locked is hence not correct.
The next version might be available in Q1\Q2 2014. We will keep everyone updated via community.
Best Regards,
Ashwani Kr Sharma

How do I use the Japanese fonts in Font Book in a Pages document?

How does one use the Japanese fonts in Font Book in a Pages document. Pages has its own fonts but I cannot get the Japanese fonts into it.

To type japanese on a computer you change the keyboard, not the font. Go to system prefs/keyboard/input sources and add Japanese/Kotoeri to the list, then select Hiragana in the "flag" menu at the top right of the screen, then type. The font will take care of itself.
http://redcocoon.org/cab/mysoft.html
If you have any further questions, just ask.

7515 ios 8 scanning doesn't function using document feeder

My AiO remote updated on my iPad today and i have issues scanning from the scanner. The printer and tablet functions properly when scanning using the glass however when using the document feeder, AiO remote scans the sheets then before saving it says there is a problem with the scanner, check the scanner. not sure why it works with the glass and NOT with the feeder.

I am having the exact same problem. I will add that scanning from the document feeder to my Mac Book works fine. The problem with the document feeder is only whenn atttempting to use the AiO software on my iPad.

I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

The application Acrobat provides no language translation capability.
If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
Transfer the output into a word processing program that is localized to the appropriate language.
Do cleanup.
Be well...

Previewing Pages document in Preview shows page numbers incorrectly

Previewing Pages (5.2) document in Preview (7.0) shows page numbers incorrectly. Regardless of starting page number preview shows as Page 1.
Suggestions appreciated...

That appears to be YABIP5 (Yet Another Bug In Pages 5].
Pages .09 documents are fine.
No prizes however for finding bugs in Pages 5/5.2 it's swarming with them.
Peter

Solman_setup document

Similar Messages

Maybe you are looking for