Solution for Analog Stereo System

I have been a Mac user for years. I currently have a Macbook Pro and have had it hooked up to my wireless network using the Airport Express. Due to a change with my VoIP carrier, I decided to get the Time Capsule. Everything is working just great, except I have no way of listening to iTunes through my stereo any longer.
With the Airport Express, I plugged a monster cable into the back of my receiver and voila! However, there is no connection on the Time Capsule. Does anyone have a solution for me?
Thanks!

That makes sense; but it's not working. Perhaps I have something connected incorrectly? Cable modem in from cable. Then I have the Time Capsule. Off of there I have the VoIP connected to the phone and then cable connected to the AirPort Express. The AirPort Express just keeps blinking yellow and won't recognise the network. What am I doing wrong? I feel like a complete idiot!

Similar Messages

Backup solutions for Solaris 10 systems

I am trying to put together a backup solution for a number of SunFire V240 systems running Solaris 10. We do run our backups using NetWorker, along with a couple of high powered back up systems. But this solution I am trying to create is something that can be performed by our first responders, our help desk folks. The systems in question are already in production but we do have days where we can bring them down for maintenance or whatever we need to do. Therefore, I can implement this new solution during the day(s) of maintenance time.
I was looking at using Solaris Volume Manager and its metadata configurations. But I am unsure how to start with files sytems already created. I want to be able to have a backup of the boot disk in the event that the hard drive in which it resides goes down. I want our help desk folks be able to immediately bring the system right back up with little down time during the evening to late hours.
I guess what I am looking for are exact steps to help configure this backup solution with Solaris Volume Manager for our production systems. Can anyone help?

Hey there,
Have a look at this excellent guide. I think that you may find what you need here. If not drop an email back. To begin with you need an extra disk(s) since you will mirror your data. This is sort of a pre-requisite.
Good luck,
Pierre
http://www.adminschoice.com/docs/solstice_disksuite.htm

Best solution for bringing new systems up to date with software updates

I have read that I can create a non-deployed software update group that contains previous months patches and use that for reporting purposes to find out which systems do not have all the updates, but that is where my understanding falls short.
For some reason I am not getting how I can update new systems with all the updates before its existence in a domain, wrapped around my brain.
Can someone help me get this through my noggin please?
Thank you

I understand how to deploy SUGs to a dynamic collection.
This is my dilemma:
I currently piloting SCCM 2012 and bringing new systems into SCCM 2012 every 2 weeks to a month
I have a monthly Patch Tuesday ADR configured that creates the SUG, but does not enable deployment, so I can ensure everything is in order before I enable it
I then enable the deploy and target a collection that includes all of my pilot collections that consist of computers from remote sites so I do not have to deploy a SUG to each collection\
Now this works great for me, BUT many of these systems that I bring into SCCM 2012 every 2 weeks to a month do not have the patches installed on them, so I am trying to understand how I am supposed to get all of those previous patches deployed to them.
Can you tell me if this solution would work:
Put previous month's patches in a non-deployed compliance SUG and name it something like "2014 - Compliance Reporting" and use that for reporting purposes.
Create another SUG and name it something like "2014 - Compliance Deployment". Then deploy the "2014 - Compliance Deployment" SUG to a collection containing systems that do not have the updates installed on them from the "2014
- SUM Compliance Deployment" SUG.
OR
Do I just simply deploy the "2014 - SUM Compliance Deployment" SUG without running any report and let the clients figure out what to install?
OR
Do I tell the remote site admins to manually update the system by going to the Windows Update site and after that, allow SCCM to take over after the systems have all been updated that way?

Is Mac Tuneup a viable solution for a slow system?

I have heard mixed reviews and am wondering if anyone here has had good experience.

You may want to run these "standard" fixes if the problem persists.
1) Check the amount of free space on your harddrive. You should have a several gigs free.
2) You should run disk utility
     Macintosh-HD -> Applications -> Utilities -> Disk Utility
     a) verify the disk
     b) update your permissions.
3) You may want to run applejack to clean up your machine.
     http://applejack.sourceforge.net/
Run activity monitory to see how things are going. Verify that you have enough memory.
Look at what is happenning with your Mac when you run Activity Monitor.
Macintosh-HD -> Applications -> Utilities -> Activity Monitor
Click on the CPU tab on the lower half of the window to see how time you are using.
Click on System Memory to get statistics on memory usage. You should have some free memory.
When you have lots of page outs more memory will be helpful. My entry for entry for Page ins/outs is:
Page ins/outs: 29163/0
Notice I have 0 pageouts which says that I am not using my harddrive for extra memory space. Thus, I have enough memory.
Activity Monitor has a neat feature where it can display a dynamic dock icon. In Activity Monitor View > Dock icon > Show cpu history.
"Reading system memory usage in Activity Monitor :"
http://docs.info.apple.com/article.html?artnum=107918
Managing Memory
See   Kappy
http://discussions.apple.com/message.jspa?messageID=8025223#8025223
Problems from insufficient RAM and free hard disk space
http://thexlab.com/faqs/lackofram.html

Hookup to analog stereo system - no right channel output

I am using the 1/8" stereo to RCA adapter audio cable to hookup my Audigy 2 Platinum to a Sony amplifier/receiver to play through my Bose 30 speakers.
I get stereo seperation when I play a cassette through this same amplifier and I have tried the tape input for the soundcard, but still get no right channel, but hear the left channel in both speakers.
I hear the stereo signal fine when listening through headphones plugged into the i/o module. Something is amiss at the soundcard's # output, I think. I have tried multiple adapter cables and rca cables. I have also tried all available inputs on my amplifier and all available outputs on the soundcard and i/o module.
It seems to be the soundcard. What do you think?

The amp is only receiving the left channel which is the default mono channel. I assume the amp is not switched to play mono and is doing this automatically by default. I do not know what inches are but I assume you mean a 3.5mm connector to RCA converter. 3.5mm connectors are available in both mono and stereo, which do you have?
Are you getting any signal from the right channel from the soundcard, you can check this by unplugging the left (white) RCA cable while leaving the right plugged in and listen for sound.

Why Hp does not find any solution for Noisy Fan systems ?

I got DV6t core i5 6gb ram + 1gb Ati Radeon Graphic Card (6490m) + bluetooth + Bluray
I have to return it because of that noisy fan ; i was a new member of Hp family and i never investigate about that product for Laptop. After it got that gorgeous Laptop , i got this fan issue ; and i research that fan is working normal/anormal ; what i find out is Hp has a Noisy Fan Issue on all of the Video clips , Forum Websites even its own website ; I realy didnt know till i got it. If that is a common issue , Why that big brand HP doesnt solve that problem since many years ? I sincerely doesnt want to return this item because of fan ; because there is no comparative product in others company has .... (Bluetooth + Bluray + Finger print + 1gb (Integrated Graphic) and $749 ; i can not find any brand or product which includes that options in this price ..... So UNFORTUNATELY i am returning that Beautiful Laptop Because of ridiculous fan noise ; is that really hard to install a fan which is really silence ??? I have a Toshiba brand laptop , even the fan is working hard there is no bothering noise at all (Even its 4 years old) . I was thinking that Hp product has high performance equipment thats why this fan works hard or noisy because it could be stronger than my Toshiba which has core 2 duo technology 256 mb graphic card ; But i was wrong because of this video clip ; http://www.youtube.com/watch?v=-yLEXZGRGPY

I got DV6t core i5 6gb ram + 1gb Ati Radeon Graphic Card (6490m) + bluetooth + Bluray
I have to return it because of that noisy fan ; i was a new member of Hp family and i never investigate about that product for Laptop. After it got that gorgeous Laptop , i got this fan issue ; and i research that fan is working normal/anormal ; what i find out is Hp has a Noisy Fan Issue on all of the Video clips , Forum Websites even its own website ; I realy didnt know till i got it. If that is a common issue , Why that big brand HP doesnt solve that problem since many years ? I sincerely doesnt want to return this item because of fan ; because there is no comparative product in others company has .... (Bluetooth + Bluray + Finger print + 1gb (Integrated Graphic) and $749 ; i can not find any brand or product which includes that options in this price ..... So UNFORTUNATELY i am returning that Beautiful Laptop Because of ridiculous fan noise ; is that really hard to install a fan which is really silence ??? I have a Toshiba brand laptop , even the fan is working hard there is no bothering noise at all (Even its 4 years old) . I was thinking that Hp product has high performance equipment thats why this fan works hard or noisy because it could be stronger than my Toshiba which has core 2 duo technology 256 mb graphic card ; But i was wrong because of this video clip ; http://www.youtube.com/watch?v=-yLEXZGRGPY

IPod compatibility for a car stereo system

Hello,
I am searching for car stereo system that has ipod compatability for my teacher's birthday. Do you have any auggestions? I'm kinda clueless on this stuff.

You need to be more specific. If you're just looking for some kind of interface to work with a radio he/she already has, then I would need to know what kind of radio it is, or if it is a factory radio, I would need to know Make, model and year of the vehicle to give you some ideas. If you are looking for a new radio, then most of your aftermarket radio manufacturers make iPod compatible radios that simply need to have a cable added and you can plug an iPod directly into the new radio and control it with the radio. This allows text to be shown on the radio display as well as charges the iPod. I currently work with Alpine and Kenwood and both of them offer a full speed interface. Full speed is kind of important as some of the older interfaces were slow and cumbersome to operate.
Give me a little more info. and I'm sure I can help you out.
Windows XP
Windows XP

Apple TV2 missing analog audio output for multi-zone system

Found out the hard way that most receivers can't support digital audio in multiple zones (i.e., Zone 2). Since Apple TV2 (ATV2) dispensed with any analog output, if you have a whole-house system that depends on mult-zone to distribute audio to various speakers, you won't be able to use ATV2 to stream music to anything other than Zone 1. The only outputs are HDMI and optical (both digital audio). I think I found a work around (which, of course costs more money) which is a "de-embedding" device from Atlona that takes HDMI in and splits out the audio to analog and passes the HDMI through to the receiver. The analog audio output then lets me connect to the analog in on the receiver so it can stream to all zones. I figure Apple just didn't have enough real estate on the new product to make room for analog, but it's a pain. Hope this helps someone. If anyone knows a better work-around, I'd love to hear it.

I have the same issue with a MacMini I use for music. My solution was to use an inexpensive optical splitter - one feed to the optical input of my receiver and the second to a DAC. Then run standard RCA audio cables from the DAC to the analog Zone 2 inputs.
Here is a link for a DAC
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042302&pid=6884&seq=1&format=2
They should have the splitter as well.

Recently downloaded FLAC app. and want to stream 96/24 to my stereo system. Whats best wireless and hard wired option for a 30 foot run.

Recently downloaded FLAC app. and want to stream 96/24 to my stereo system. Whats best wireless and hard wired option for a 30 foot run?

Try these 3 possible solutions:
1. Restart iPad
Hold down the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, hold down the Sleep/Wake until the Apple logo appears.
2. Close inactive Apps
Double-click the Home button; hold Apps down (in the Task Bar) for a second or two until you see the minus sign. Tap and close all inactive Apps.
3. Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Ignore the red slider.

Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system I recently purchased.

Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
You can also send my answer to [email protected]
Thanks in advance for all who will help.
slovebk

refer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
http://support.apple.com/kb/HT1380
Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
Have a nice day!

Any solution for Windows 8.1 System Image Backup on DVD fails with error 0x80040154??(apart taking backup in external drive)

Windows 8.1 is facing a problem while taking System Image Backup on DVD, it pops an error saying 0x80040154 and more it says that class is not registered , i am trying from days to find some optimum solution for it apart from taking it on external
hard drive...any suggestion please let me know asap!
regards!

Hi,
Check this article first:
0x80040154 error may occur when you create a system image backup in Windows 8.1
http://support.microsoft.com/kb/2934165/en-us
Please capture the system event during you reproing this issue by using Process monitor:
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If there is any Access denied error, follow this blog to solve this issue.
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
You can also upload the saved log file here for our research. Please upload them to a file sharing service like Skydrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

How to assign a system to a solution for EWA in SAP Solution Manager 7.1 Solman 7.1

Hello Dear experts,
I am trying to create and generate an EWA Early Watch report, I am configuring a Solution Manager 7.1 since scratch and now I am in the Managed System configuration - Early Watch Alert Management.
I know that in order to get the report the system have to appear in the systems and it has to be assigned to a solution but there is not appearing..
Maybe there is some step that I missed and I have to configure but I don't know which one.
Below you can find screenshot of my issue.
I appreciate your help,
Thank You
Javier Tenorio

Hi Javier,
Please follow the below steps to create solution and assigned to systems.
First assigned the logical system properly.
Execute transaction "SOLMAN_WORKCENTER", click on the tab "Solution Manager Administration", and click on "Solutions" on the left of the screen. In the "Solutions" tab, click on the "New" button to create a new solution.
A window will show up. Enter a name for the solution and select a language and click on "Save Solution"
assigned the system to solution which you have created.
Hope this will solve your problem.
Regards,
Gurpal

Solution Manager System Monitoring for non SAP system

Dear Support,
I have configured the CCMS Agent (SAPCCMSR) for non-SAP system (Windows 2008R2).
The system information (e.g. CPU, Memory, Disks etc) has already showed in RZ20 of Central Monitoring system (e.g. Solution Manager).
How can I do to configure to display these information in the Alert Inbox tab on System Monitoring Workcenter?
Best regards,
Fan Hung

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

Best Solution for Backup of Dual System(Mac & Win7) and Data Partition

I need a professional solution of backup my dual-system, which are Mac OS Mavericks and Windows 7, and a Data Paritition.
Right now, I have three partitions: Bootcamp (for Win 7 system, NTFS), DATA (for both system files, FAT32), Macintosh HD (for mac os system, HFS).
Before on PC machine, I may restore the system with Ghost Tool, but since now I am using Macbook Pro. Cannot do that way any more I think.
Also, the annoying thing is DATA partition, if I make it a FAT32 format, some large files cannot be copied into, but if I make it a NTFS, Mac OS cannot regonize it, right?
What about using exFAT format? Never use that before, actually. I heard that format can accept large files and also be regonized by Mac OS.
To sum up, two advices needed. 1. Win 7 partition backup and restore w/o breaking Mac OS system; 2. DATA partition format for both system.
Thanks a lot. I appreciate your help!

Also, the annoying thing is DATA partition, if I make it a FAT32 format, some large files cannot be copied into, but if I make it a NTFS, Mac OS cannot regonize it, right?
Use exFAT instead of FAT32.
http://lifehacker.com/5927185/use-the-exfat-file-system-and-never-format-your-ex ternal-drive-again
I don't know how to backup the Windows partitions. For the OS X partition:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
PlotinusVeritas gives some great suggestions for purchasing external hard drives in this thread:
https://discussions.apple.com/thread/5602141?tstart=0

Solution Manager information for Java stack systems

Hi,
Could someone please help with the setup of Solution Manager, and how to connect to the backend of a Java stack system. For our ERP systems this is working via RFC, but I was hoping to get more information on the procedure for java. I can specify manually via SMSY, but I am sure there must be a setup that can pull the information for the system itself. Could anyone shed some light on this if possible please.
Regards,
Chris

Dear Chris,
ABAP Stacks use RFC as you know for inter system communications.
Java stack systems use Solution Manager Diagnostics.
You will need to run Solman_Setup > Managed System Configuration
First you should visit the link http://service.sap.com/diagnostics
There you will see a link to the media library, and there you will find complete documentation.
Hope you find this information Helpful.
Regards,
Paul

Solution for Analog Stereo System

Similar Messages

Maybe you are looking for