Solution Manager Config Guide

Hi Gurus,
Is there anyone here who have Configuration Guide Document for Solution Manager?I really need the document. Thank you
- Aleluya -

Hi,
you sould find the SAP Solution Manager documentation at <http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000646691&_SCENARIO=01100035870000000112&_OBJECT=011000358700000325732008E>
A good strategy for the configuration of SAP Solution Manager is following the SAP reference IMG in transaction SPRO.
Best Regards, Vital

Similar Messages

Solution manager configuaration Guide

HI,
As a functional consulatnt ,i want some document to configured the solution manager in system so please provide me document for the same.
so please help me on this and if someone have worked on configuaration of solution manager then please also give me contact number as i have some queries related to this.
Thanks and Regards,
Vivek Garg

hi,
i have worked on solution manager
but, here we will not do any thing we will define our project and basing on your base line configuration or business process you will get the documentation automatically and the source is from liabrary all the diagrams will be taken from the liabrary.
http://help.sap.com/saphelp_sm32/helpdata/en/ae/64c33af662c514e10000000a114084/content.htm
regards,
balajia

IPS device manager - config guide.

hi,
Can I get a link to download ips device manager configuration user admin guide.
Which can help us to configure / tune IPS-IDS. ( for any series )
Please share the link.
Thanks in advance.
Subodh

You can look at this url on CCO for downloading 6.0 version IDM configuration/user guide :
http://www.cisco.com/en/US/docs/security/ips/6.0/configuration/guide/idm/idmguide.html

Create a Support Message in Production system showing up in Solution Manage

Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
Thanks
Paul

Hi Paul
The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
Make sure your RFC's are trusted and that you have SAP ALL during config.
I hope this will help:
Setup Service Desk
Steps to follow while configuring support desk.
1) Implement the note 903587 .
2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
3) Check all the objects in the table BCOS_CUST using transaction SM30.
Appl : OSS_MSG
+ :W
DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
+ :CUST 620
+ :1.0.
*4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
4.3) Activation of the following components has to be done by replicating the previous steps
3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
3.2) SOLMAN40_SDESK_ACTIONLOG_001
3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
3.4) SOLMAN40_SDESK_TEXTTYPES_001
*Depends upon the number of inactive BC set objects that we have after the upgrade.
4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
Number ranges for ABA notifications
5.1) create an internal and external number range using transaction DNO_NOTIF.
5.2) assign number range intervals to groups internal and external.
5.3) SLF1 is the internal number range group
5.4) SLF2 and SLF3 is the external number range interval
5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
5.51) Go to transaction DNO_CUST01
5.52) From the GOTO menu select the menu item DETAILS
5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
Number ranges for Support Desk notification
5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
5.6) Then assign both the external and internal numbering
5.61) Go to SPRO and then to SAP Solution Manager
5.62) Then select General Settings and then select Transaction types
5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
8.2) Select the item Service Desk and then to general settings.
8.3) Execute the category u2018Define Transaction Typesu2019.
8.4) Select the transaction type as SLFN
8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
9) Activate the partner/ Organization
9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
9.2)Find the entries starting with HRALX
HRALX-HRAC WITH VALUE 'X'.
HRALX-OBPON WITH VALUE 'ON'.
HRALX-PBPON u2018ONu2019.
HRALX-MSGRE u2013 u20180u2019.
9.3) If entries are not found create it.
10) Generate Business partner screens
10.1) Go to transaction BUSP.
10.2) Execute the report with the following parameters
CLIENT - Client in which business partners should be created (solution manager client)
APPLICATION OBJECT-
SCREEN - *
Generate all/ selected screens - All screens.
delete sub screen containers -
11) implement SAP note 450640.
11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
11.2) Execute it with test mode box unchecked.
If a new relationship is to be created then steps 12 and 13 has to be followed
12) To create a relationship category
12.1) Go to transaction BUBA
12.2) Select the entry CRMH00: Undefined relationship
12.3) click on copy
12.4) Rename CRMH00 to ZCRMH00.
12.5) CREATE A RELATIONSHIP CATEGORY.
IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
' FROM BP2 : IS A PART OF ATTUNE
13) Add the relationship category to the support team partner function
13.1)Use SPRO
IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
-> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
13.3) In the field relation ship category, Select the newly created relationship category and save.
14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
15) Create a new access sequence for the support team determination
15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Configuration ->
-> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
->Define Access Sequence
15.2) Click on New Entries
15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
15.4) Create an new Individual Access with the following value:
u2022 Batch Seq: 10
u2022 Dialog Seq : 10
u2022 Source : Business Partner Relationship.
u2022 Detail on the source:
u2022 Partner Function : Reported By (CRM)
u2022 Mapping/restrictions
u2022 Flag Mapping/definition for partner being Searched
u2022 Partner Function in Source: Support Team (CRM).
Save it.
This Access Sequence will give us the Partner which has the relationship assigned
to the Support Team in the Reported By partner data.
16) Adapt the partner determination schema/Function
16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
-> Partner Determination Procedure -> Define Partner Determination Procedure.
16.2) The two options to adapt partner determination schema are
16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
16.22) select the line starting with SLFN0001 or the newly created procedure.
16.23) Double Click on Partner Function in Procedure.
16.24) Select the Partner Function "Support Team", and click Details.
16.25) in the detail view only change the Partner Determination/access Sequence to
the one we've just created. Save your entry.
17) Create a root organizational model.
17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
17.3) enter the organizational unit, the description and save it.
18) Create the support team organization
18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
19) Create the business Partners.
19. 1) Key users- End user (Business Partner General) ,Address should be specified.
19.2) go to the transaction BP.
19.3) create a new Person, Select the role: Business Partner (Gen).
For Identification of the key user
19.31) click on the identification tab
19.32) enter a line in the identification number formatted as follows
IDTYPE : CRM001.
Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
eg: USER NAME : USER1.
CLIENT : 100.
SID : ER1.
INSTALL NUMBER : 123456789.
IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
20) Message Processors- Support Team members .
20.1) they should be created first as the users in the corresponding client of the solution manager.
20.2) As business partners they will have the role 'EMPLOYEE'.
20.3) Go to transaction BP .
20.4) Create New Person with the role employee.
20.5) In the Identification tab you should enter the user name in the employee data/User Name.
eg: username: proc1
enter proc1 in the field User name.
21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
22) Assign the business partners (Message Processors) to the previously created support team.
22.1) Go to transaction PPOMA_CRM.
22.2) Select the support team 1.
22.3) Click on create
22.4) select position
22.5) call it 'MPROC_T1/Message Processors for team 1
22.6) Replicate it for the other support teams.
22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
choose owner/Business Partner find and select the business partner
22.8) Validate and Save it.
22.9) If the assignment of business partner is not possible then implement the note 1008656
Or 997009
23) Create the iBase component
23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
23.2) or use the transaction IB51 to create the installed base.
23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
24)Assign Business Partners to iBase Components
IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
-> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
*--optional--
If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
now to assign the partner Function "System Administrator".
25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
26)Define the transaction variant for the message processors
Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
27) Go to transaction PFCG
27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
27.2) Give a description Message Processor role and save it.
27.3) Go to the menu tab and choose add report
27.4) select the report type : ABAP Report
27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
27.6) Enter the previously created variant.
27.7) flag the skip initial screen box.
27.8) flag the SAPGUI for windows.
27.9) Create a new transaction with tcode starting with Y or Z.
27.10)Display this transaction and check the values at the bottom of the screen
in the subscreen Default Values, you should have the following parameters:
u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
u2022 D_SREPOVARI-NOSELSCRN = X
And also all the user should have the correct role.

Solution Manager Landscape Components

Hi,
   I am in the process of configuring Maintenance Optimizer.
   I have SolutIon Manager Development(SMD) and Solution Manager Production(SMP).
   I have some confusion
   When I go to TC SYSY in SMD the Landscape Components are ECC DEV,SM4 DEV and Sand Box.
   The same when I see in Production I can see only EPORTAL7.
    Also in SMD I have the option of adding ECC QAS and ECC PROD which I do not get in SMP.
    I just want to know where do I configure Maintenance Optimizer in SMD or SMP.
Also do I need to add ECC QAS and ECC PROD in SMD.
And do I need to check any connectivity between ECC and Solution Manager.
Or at last is there any configuration issue if you feel.
Thanks
Parvez Khan.

Hi Parvez,
You get the latest version of Solution Manger Config guide and start checking your config step by step. I feel Landscape components are not added properly in SMD also check the respective RFCs ( Which is mentioned in Config Guide)
Hope this is useful
Regards
Umesh

BPML from Solution Manager

Hi all,
I want to download in excel file BPML from solution manager, kindly guide me the process, can we do that from solution manager or is there any other similar thing to BPML that we can get from Solution manager.
Thanks

there isn't a true BPML in SolMan.
The closest thing you can get to it, which better in my opinion, is:
1. Go to SOLAR_EVAL
2. Under configuration select the Cross Tab analysis report
3. Select the various reports you wish to merge (I recommend transactions, config, development and testing if you have used those tabs)
4. Click execute
5. Export it to Excel
6. Enjoy!
regards,
Jason

Add BI System in Solution manager

Hi All,
I need to add BI DEV, BI PRD Systems to solution manager. As per my understanding first i need to create logical systems, after wards i have to add this system in SMSY.
I will be glad if some one can post ur suggestions and procedure to add this
Thanks

Hi,
this is same for all the system. only you have to select appropriate product instance
please refer this screenshots here [SMSY Set Up|http://www.way2sap.com/sap-article/adding-a-sap-system-to-smsy-of-solution-manager-1907/]
get the other set up guides on service.sap.com -> release and upgrade info -> installation and upgrade guide -> SAP components -> SAP Solution Manager -> Operation guides.
Thanks
Jansi

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Configuring Solution Manager: Alternative Role to SAP_ALL

This is a general question regarding configuring Solution Manager and note 834534. I am configuring Solution Manager 7.0 at a client site. The main components that I am configuring are on the Monitoring and Operations side; for example, System Monitoring, Service Desk, Issue Management, and Change Management for Maintenance Optimizer. CHaRM will follow later on. Additionally, the client would like to use the project side of Solution Manager.
When I took training for Solution Manager from SAP, the SAP instructor advised the class to have SAP_ALL when configuring Solution Manager The problem I am having is that the client will not issue me SAP_ALL in the Solution Manager instance, regardless of the recommendation in note 834534. I can understand the client's reluctance to issue SAP_ALL, even though Solution Manager is not a financial system in of itself, however, I have found that I am constantly having to ask for authorizations as I step through the wizards and the Scenario-specific settings. When I run into issues which require further investigation by running transactions to check certain settings that are not specifically tiedd to a wizard or scenario-specific setting transaction, I run into further delays as I ask for additional authorizations to troubleshoot issues.
We have implemented the roles and assigned them to my ID in Solution Manager as outlined by the SAP Solution Manager Security Guide to the fullest extent possible; and I have been issued "Basis Roles" that the client issues to their Basis team. Regardless of these actions, I still run into authorization issues.
My question is, apart from the SAP Solution Manager Security Guides recommendations (which does not mention SAP_ALL), is there a role being developed, or has been developed that can be assigned to the Solution Manager configurator in lieu of SAP_ALL (as per note 834534)? I would think that this issue has been raised before, particularly since many companies have implemented SOX controls and are skittish about issuing SAP_ALL.
Your feedback is most appreciated.

Thanks for the reply, Nesimi.
While I appreciate that you do not use SAP_ALL, is that the case when you are configuring a brand new, clean system? Are you using the Configuration Wizards with out SAP_ALL? I ask this because when I ran the first configuration wizard, one of the steps is to create a "configuration user", which creates a user with SAP_ALL. However, I cannot use that wizard generated user ID because it has the role SAP_ALL.
In general, I am operating on 3 sources of information that says I need SAP_ALL to configure the system (not necessarily to operate it):
1. An SAP Instructor for the Solution Manager Operations and Monitoring Class
2. The IMG Activity "Create Configuration User" documenation in SPRO
3. Note 834534
I will review the english version of the link http://help.sap.com/saphelp_smehp1/helpdata/de/40/8ac473d40943ddb23def12bdb33437/frameset.htm that you have thoughtfully provided.
With respect to note 123640, I am not sure if that solves my problem or answers the fundemental question that I have in that given the 3 sources I quoted above. It seems to me that SAP's approach in indicating clearly that they prefer that the configuration user should have SAP_ALL is flawed given today's corporate governence policies. Clearly this recommendation is only for the initial configuration, and SAP_ALL can be taken away and replaced by the roles and recommendations in the SolMan security guide; to maintain Solution Manager. But when it comes down to the question "what do you need to configure Solution Manager, because we won't give you SAP_ALL", I am hard pressed to give an answer despite literally spending hundreds of hours researching "documenation" which does not give clear cut answers. I think SAP needs to address this issue instead of taking the easy way out and saying you need "SAP_ALL" as illustrated in the 3 sources of readily available information cited above.

Question about setup ewa in solution manager 4.0

Hi
I tried to setup ewa in solution manager 4.0, but when I clicked on the "setup EarlyWatch alert", it told me that:
the Service is not available, Fehlercode:ICF-NF-http-c:000-u:SAPSYS-l:D-i:saptux04_SM4_04-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
any one can help me?
best regards

Hello,
You will have to activate the service first in transaction SICF.
SAP recommends to do so via the the SAP Solution Manager IMG following the respective IMG path:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Confiugration -> Basic Settings -> Standard Configuration of Basis Settings -> Solution Manager -> Activate Solution Manager Services
Enhanced configuration of SAP EarlyWatch Alert (Service: /sap/bc/webdynpro/sap/dswp_rating_4_monitoring)
This application is fairly new and contained in SAP Solution Manager 4.0 SP12 onwards. Information on the respective functionality can be found right here in the SAP Solution Manager SP News:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000478802007E
I hope this helps to solve your issue.
Regards,
Doreen

Configuring the Alert monitoring of Solution Manager 4.0

Dear all,
How can I notify from the central monitoring system when alerts happened?
I have already create and assign auto-reaction method to specific monitor attribute with alerts, but nothing happend. I even looked at the table CSMCENTOOL where the alert data suppose to stored, and the table is still empty.
I will be greatfull if anyone can provide me appropriate document in this matter, or guide me with a list of things that need to be done.
Kind regards,
Yagel

Hi Kai,
Thanks for your quick response.
I have already create and assign the central auto-reaction method exactly as in the example,
and when I try to start the auto-reaction method I receive the alert information "Cannot determine data for method DUMMY_TOLL_FOR_DOUBLEHOP".
I have overcome this alert information by changing the excute method of the defined central auto-reaction from Only in central system, trigged by CCMS agents to Periodically in process(Short running program), and still, nothing notify when alert happened.
Should I configure the "Related Solution Manager configuration guides on SDN" which describe in the bottom blug as well?
I also didn't understand you when you say to send from SAP-System to another account?
Thanks in advance,
yagel.

Solution Manager 4.0 Title says "SAP Easy Access CRM"

Hi,
We installed Solution Manager 4.0 on Solaris/Oracle.
Solution Manager 4.0 Title in Easy Access page says "SAP Easy Access
Customer Relationship Management"
I want to change the title. So I created a customer message with SAP. They gave following steps. I followed these steps. It just displays the title. I don't see any option to edit the existing title.
Did you come across this situation?. If so, can you please shed some light?. Thank you very much for your time.
Steps
The menue which is displayed as initial menue can be defined in the IMG
(transaction SPRO) under the following path:
SAP Solution Manager Implementation Guide
- SAP Customizing Einführungsleitfaden
- SAP NetWeaver
- Application Server
- System administration
- Definition on initial menu
Please change this to: AI_SOLAR -SAP Solution Manager

What was the solution?
Hamed

Display SXMB_MONI XML errors in Solution Manager (CEN)

Hello All,
Requirement is to display the XML error messages in SXMB_MONI in our Solution Manager (CEN)? Could you please let me know the major steps that would be involved on the same?
Please share your thoughts!
Thank You,
Antarpreet

My apologies not reading it properly....
Solution manager also usess the same concepts of the CCMS as we do it in XI, so you can setup the XI envinorment details in solution manager and try to capture the alerts....
Here are the Steps:
Prereq:
All Satellite systems connected from Solution Manager on the "Transaction SMSY" screen.
Prepare RFC connections between Solution Manager and Satellite systems for data collection ( RZ20 Data collection RFCs)
Steps:
1. Register "SAPCCMSR" and "SAPCCM4.X" on Sattilite Systems to report ABAP and Java stacks in local systems and report to Solution manager System
2. On Solution Manager System ( Acting as Central System) configure CCMS monitoring sets fromRZ20.
3. RZ21 --> configure CCMS pings alert monitoring.
all info with step by step guide avalible from Solution Manager configuration guides and http://service.sap.com/rkt
( This ref from solution manager forum)
check this link also:
http://www.scribd.com/doc/7858198/Solution-Manager-SAP-NW2004S-Monitoring-Setup-Guide-SP12

Treasury and risk Managament Configuration Guide

Hi Friends,
Can you please provide me the treasury and risk management config guide for the following :-
a. Foreign exchange forward cover
b. MTM Report Config
c. Financial Postings for the foward cover.
d. Swapping of forward cover.
Is treasury part of financial supply chain management, also let me know whether it is a SAP license product or part of normal standard product.
Please forward me the same to [email protected]
Thanks in advance.
Deepak

Hi deepak,
Check out these links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIARCR/FIARCR.pdf
Assign points if useful
Regards
genie

Solution Manager and HP Quick Test Connection.

Hello Gurus,
We want to use Solution Manager to make test for our developments, but our corporate tool for this is HP Quick Test.
As far as I know it's possible to connect Solution Manager to HP Quick Test. Does anybody know about it?
Thanks in advance.

Hi,
Are u mentoning about HQ Quality Center? If yes, these documents might help:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> SAP Quality Center by HP -> Integration Test Management ...
Also check SAP Note 1059350 - Installing SAP Adapter for SAP Quality Center by HP.
Rajeev

Solution Manager Config Guide

Similar Messages

Maybe you are looking for