Solution Manager RFC issues
Hi Folks,
We are facing problem with RFC connection from Quality to Solution Manager. It says " No authroization for trusted system" however the RFC connection from Solman to Quality is working fine.
in SMSY -> RFC connection test working fine and able to fetch the qas to solman system. We have give all required authorization including SAP_ALL, SAP_NEW and S_RFC_XX Objects also assigned.
It would be of great help if some one can help us on this.
Regards,
Vinod
Hi
Please check the "Troubleshooting in Trusted/trustng system" part in below link
[http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/content.htm]
Hope this help to fix the issue,
Thanks,
Jansi
Similar Messages
-
Abour Solution Manager RFC connection
Hi, All
About soulation manager 4.0, I got configuration guide to setup "Real time system Monitoring"
as per user guide -> create RFC connection and setup system monitoring, it make me little bit confousing
currently Solution manager setup for earlyWatch report and works fine.
WHAT I WANT ?
To seutp/configuration "REAL TIME SYSTEM MONITORING" for XI 3.0 and CCMS monitoring in Solution manager
T-code: SMSY shows this screen:-
There are 5 different types of Tab after apply SMSY
1. Landscape Components
2. Database
3. System Group and Logical Components
4. Product Definitions
5. Overview
I am not sure where I create RFC connection and what value will i put in it?
1. Landscape components shows under: all others server name list
SERVER
shows server host name: (r5wxw0) and right side windows shows
data source RFC
and Technical Data Tab shows all others value (that system I like to monitor)
2. DataBASE (all others application server name)
IDV
Header Data Tab
Data Source: TMS/RFC
3. System Group and Logical Components (under)
Project Landscapes
Solution Landscape - operation
Logical components
4. Product Definitions (under)
lot of product list
5. Overview
Server
Database
Systems
Now where sould I go to configure CCMS monitoring ?
Thanks in Advanced
TravisHi user issue2008 issue
actually i can't connect to solman, but i think it was under 3.
When you select a component, i.e. Dev R/3 or so you should have several clients.
There you can define RFCs and also there you can define Solution Monitoring.
But I think there should be already RFC-Destinations, when you had configured the EWA.
Then you should check the client with the RFC-Destination and Checking Destination.
In Edit-mode you can check the box for Solution Monitoring and save and ok.
After that it should be activated.
Hope it helps you.
Regards,
René -
Solution Manager Upgrade Issue for "Business Process Monitoring"
Hello,
We had upgrade Solution Manager 7.1 SP08 to SP11.
Earlier our BP Monitories were working fine which are not working now, also we are not able to use function “Load Monitor”.We are facing below major issues
1. No system in Logical Component
2. No RFC destination found
3. Unable to load Monitors
Also the BPMon configuration is not working post upgrade
Kindly help us to resolve these issues. -
Solution Manager ChaRM Issues when Upgrading Satellite System
When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
1. Normal Correction (In Development) Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
2. Landscape is changed to Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
3. Normal Correction moved to To Be Tested -> Consolidated -> Production
Will the Normal Correction be in error because the landscape changed for the iBASE?
Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
Thank You,
Carlen
Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
Edited by: Carlen Yuen on Jan 13, 2009 1:51 AMThanks Subhashini!
We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
Thanks again!
Carlen -
Solution manager Authorization issue
Dear all,
We are maintaining a enterprise solution manager.
we maintain all our SAP clients issues which is posted in our solution manager.
Now the issue is if the clients login in to our solution manager to see the issue status, they are able to see all the clients issues which is posted.
but we want to restrict the authorization not to see other clients issues which is posted in our solution manager.
we want them to see the issues only which is posted by them.
Please give me if there is set of authorization to do this.
Regards
PrakashHI,
From ur post, I think u have provided authorization to access the tcode crm_dno_monitor. In that case, u cannot restrict him to see all other messages. If u want to restrict the authorization, create a variant with necessary inputs which shows the result ur customer wants to see and assign that to his favourites. Only provide access to call that variant.
Rajeev. -
Solution Manager upgrade issue on Linux
Hi Alll,
Need your inputs/thoughts on this issue.
We are planning for Solution Manager upgrade from 3.1 to 4.0 and for this the setup and plan is as below:
The production data of the solution manager has been copied as a VMX FILE(VM Player) file on to a test server and we have plans to upgrade that and check and then upgrade on the production system.
The test machine has got a different IP address and hostname. From the test machine when I start the sap instance its affecting the Production machine and dueto which the production will not work until I stop the SAP Instance on the test machine.
It cannot be a IP conflict or hostname conflict as we have them differently on the test machine. But still there is an issue. The IT dept says the issue is with the starting up of the instance and we dont know where to see what exactly is the problem.
I am new to upgradation stuffs, this is my 1st assignment and I am not sure from where to start!!
Can anyone of you tell me where to check for the details?
SOLMAN is installed on a unix machine with oracle 9.2 and we are planning to upgrade it to SOLMAN 7.0
any suggestions on where to look out for the possible issue?Hi,
I did this a lot and know the side effects a little.
My recipe:
1. Start the copy without network and manage it from the VMWare Console. Change the IP address and make sure all references to the hostname (DNS and /etc/hosts) point to the new one. I hope you're working consistently with hostnames and no IP addresses.
2. Configure the firewall (iptables) on the copied system to block all requests from and to the original production server. If there is any communication with other SAP servers (like monitoring agents, SLD, or others) block this too!
3. Re-enable the network in VMWare.
Alternatively: Can't you simply put this in a VLAN or a real seperated network with just the server and a management workstation?
Hope that helps..
Nikolaus -
Goodday,
Since there is no specific Solution Manager forums yet i will post my question here:
We are working with Solution Manager 3.2 to support an implementation of MySAPERP 2004. Within the SM there is the functionality to use the Business Process Repository to create your business process and automatically get the IMG objects (configuration tab)and transactions when selecting a process.
Currently our BPR content is ICO 150 so the newest one currently available. But when we start the BPR we see processes for SRM,CRM,R/3 4.6c,R/3 4.7 and more. We see very little specifically for ECC 5.0
I was told that the current 150 content does not contain all processes for ECC 5.0 yet. I would like to get a confirmation of this and would like to know if the 160 content (release march i believe) will have all the content.
Secondly i am wondering if there is a way to limit what people see in the BPR. Our config team is very confused on which process to select since every process exists multiple times.
Thirdly i would like to know when there is no ECC 5.0 process available should you then just use the available 4.7 or 4.6 process.
Thank you very much for your helpHello,
as this is an 'old' topic (from January), I am kindly asking you to tell me how did you solve the problem?
I am interested in BPR content as part of Solution Manager. We also see processes for SRM,CRM,R/3 4.6c,R/3 4.7 and more. We see very little specifically for ECC 5.0
I also would like to know if ICO 150 or 160 packages have the content or is there another way you solved the problem.
Thank you and best regards,
Nikolina -
Solution Manager - Post_installation issue
Hi -
I've finally been able to install Solution Manager 7 w/MaxDB on a Linux box. I am now on the post-install steps where it is asking me to logon to the Application Server. I am assuming I should be able to use Firefox or IE using the URL
http://<hostname_of_J2EE_Engine_Server>:5<Instance_Number>00
How do I figure out what the hostname of the J2EE engine server is?
Should simply be this correct?:
/usr/sap/OSM/DVEBMGS00/SDM/program
[root@atl-osm-01 program]# hostname
atl-osm-01
and my instance number should be 00 right?
However, when I put in http://atl-osm-01:50000 into internet explorer I just get an error message saying that "Internet Explorer cannot display the webpage".
Are there any logs I can look at? Or what is the solution to this? Am I putting wrong info into the URL?Hello,
Have you set the profile parameter ICM/HOST_NAME_FULL
It needs to have the value of the fully qualified Host name.
This parameter is not set by default, so it needs to be maintained.
You can get more information on setting this parameter in SAP Note 434918.
Are you putting the wrong information into the URL.
What I see is not a Fully Qualified Domian Name
If you look at http://atl-osm-01:50000, all you have specified is the protocol - HTTP://
The Host name " atl-osm-01" and the port 50000
What iis missing is the company and the domain
So it should have the format http://host.company.domain:port
You need to use the fully qualified domain name, and you should also set the Parameter ICM/HOST_NAME_FULL
to the FQDN too, as this will help when accessing Business Server Pages (BSP)
Regards,
Paul -
Solution Manager - eCatt issues during rec/exec of SAPGUI based scripts
Hi all,
after the last support package set up I started to encounter some problems during the recording and the execution of test scripts based on SAPGUI command.
During recording:
First time I try to record a transaction, after selecting SAPGUI command-->start recording; prompted to target system I try to logon, but obtain an error;
Second time the recording process goes on, but it happens that the system creates more than one window describing the new session's data (the windows has title "Record SAP GUI Command" and subtitle "New Session with Following Data was created")... Another one of such pop up is created even if I create another session of the target system...
During execution:
The first time I try to execute a test script which begins with a SAPGUI command the script fails with the following error:
Target Sys Zssssss_een->een_ccc->een (Target Sys Zssssss_een->een_ccc->een)
Error in eCATT command SAPGUI
Error when Starting Replay Session. Possible Causes: 1. Scripting Is Deactivated in Replay System.
2. User Has Not Logged On Within 00:00:45 Hours or Has No Dialog Rights. 3. Too Many Session Are
Open.
If I try to re-execute the same script a second time, everything goes fine, and I can complete script execution.
Does anyone have encountered similar problems?
Thanks in advance for any solution/suggestion,
MaurizioHi Francesco,
Thanks a lot. But we have already resolved the problem. The error was in the ecatt script. In tcode secatt, after recording, the script included the rfc destination which was to be removed manually.
Regards
Sapana -
Hello,
I am planning to setup a Solman for a large system landscape of nearly 150 systems consisting of both ABAP & Java. System information will be collected by means of using SLD in Solman.
Issue: Few systems are part of another landscape also and they do REPORT to its own seperate SLD.
As per the new Solman setup I want the systems that belong only to my landscape to report to the SLD of Solman. How do I do that?Hi
My understanding is that you want only systems which are in a speacific landscape to use your SOLMAN SLD setup.
1.Host all the new systems(not a part of any other SLD) to your local SLD on SOLMAN
Hope you know how to do it.If not feel free to ask.
2.If you dont want other landscape system to use earlier SLD .Then you can actually remove them from there and add to your SOLMAN sld
3.From doing step 1 and 2 .Go to visual admin .In the server node go to services.Expand it and then go to SLD data supplier and give the details of SOLMAN (on which you have configured the SLD).
4.Perform data transfer test.If its successfull .Your Job is done -
Regarding this issue in the configuration on smsy in the solution manager
hai all,
i am havig an issue when trying to configure the smsy in the solution manager
the issue is
Invalid user s0001234567 when calling SAP Backend system
all the rfcs related to the oss is fine
i had maintained the user in the aisuser tcode correctly
and then i router is finly working
software component : st is 400 kernel and level is18
hope all the experts of solution manger help me
thanks & regards
praveen kumarInvalid user s0001234567 when calling SAP Backend system
Is it a valid S-USER?
Use valid S-USER and update the user details in AIUSER.
Regards,
Nick Loy -
Runtime Errors Raise Exception in Solution Manager
Hi Guru's,
While I try to excute the transaction solman_issue_mgnt in solution manager for issue tracking, runtime errors occurs.
Error analysis
A RAISE statement in the program "CL_GUI_HTML_VIEWER============CP" raised the
exception
condition "CNHT_ERROR_PARAMETER".
Since the exception was not intercepted by a superior
program, processing was terminated.
Could anyone suggest me on this issue.
regards,
GunaHi Juan,
As per the note, everything was fine there. We have SAP_Basis 700 with SP16.
Earlier it was worked fine. Now only we are facing this issue while excuting the t-code solman_issue_mgmt.
regards,
Guna -
Hello Sap Gurus,
I have a problem with my solution manager 7.1 sps11. ( which was upgraded from 7.0 EHP1)
When I run the configuration for the solman_setup -> System Preparation -> step3 Specify Connectivity Data I get RABAX_STATE error
Link
http://hostname:8040/sap/bc/webdynpro/sap/wd_sise_main_app?sap-client=000&sap-language=EN
Error
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
Dump
/WD_SISE_CUSTOM_AGS
/1BCWDY/M19KN704GUVUSGWREG7A==CP
I am running this from cl000 with user solman_admin to which I have added sap_all and sap_new profiles, same under ddic user.
I have set parameters:
icm/host_name_full =hostname.domanin.com
SAPLOCALHOSTFULL =hostname.domanin.com
SAPLOCALHOST=hostname
icm/server_port_0=PROT=HTTP,PORT=8040,TIMEOUT=1200,PROCTIMEOUT=1200
I have read notes 1869765,1319829
517484 - Inactive services in the Internet Communication Framework
1680616 - RABAX_STATE Solman 7.1 Basic configuration step 3.1
1831404 - Short Dump OBJECTS_OBJREF_NOT_ASSIGNED occurs in Self-Monitoring
but none is working.
Please advise as I have no more ideas what I should do. What other services to activate ?
Thank you in advance,
MihaelaHello,
I have checked and applied all the folowing notes and still the error is present:
Central Note 1933506 - SAP Solution Manager 7.1 SP11 - Basic functions
From which
Cannot be implemented
1784854, 1575989 ca
1334867(Doc. WS: Lock Release)
1288194
Note 1690804 Dual stack: Automatic creation of the technical scenario
Implemented
1830640 - Authorizations for SAP Solution Manager RFC users as of SP09
875986(snote)
1955674 Logical components for Solution Manager 7.1 Support Package 10 – Prerequisites
1990166 Deletion of RFC destinations
1970901 Custom code library collector for objects (BW solution) calls functions and methods only
2023332 Update indicator is missing for activities after an upgrade - Support Package 11
1964058 SOLMAN_SETUP: Problems with status of the RFC destinations
1906937 - Corrections for unified rendering 702/15 V (UR-mimes)
1989075 UPL Extractor date without data (1779464)
I have run from se37 report RS_INACTIVE_OBJECTS_LIST and no inactive objects found
Also when am trying to run Tcode LMDB I get same errror:
500 SAP Internal Server Error
ERROR: An exception has occurred (termination: RABAX_STATE)
And Dump:
Category
ABAP Programming Error
Runtime Errors
UNCAUGHT_EXCEPTION
Except.
CX_LMUF_INVALID_PARAMETER
ABAP Program
CL_LMDB_SERVICE_AUTHORIZATION=CP
Application Component SV-SMG-LDB
What happened?
The exception 'CX_LMUF_INVALID_PARAMETER' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_LMDB_SERVICE_AUTHORIZATION=CP' has to be
terminated.
Please advise as I find no solution on all forums that I have checked so far.
Thank you,
Mihaela -
Use of CRMD_Order with Solution Manager
When you create a change request through the CRMD_order how do you link it to a business process structure in Solution Manager? Through custom fields? Or are you obligated to start the initiation of a change request within solution manager through issue/message tab in configuration (SOLAR02)?
I do not know if anyone can confirm this , but I finally was able to assign the business scenarios from my business process structure to the solution with the source project.
(For those interested you have to go into transaction DSWP, Select Solution Landscape, go into Solution Landscape Maintenance, select your solution structure on the left side of the screen and get into business scenarios, make sure you are in change mode, then use the download under scenario name to select your scenarios).
When I create an issue and this is what I hope someone can confirm, go into context and add a business scenario, it doesn't show in SOLAR02 under the issues/messages tab.
This is somewhat inconsistent, as when I create an issue out of SOLAR02 it does assign the business scenario automatically and obviously will show in the list. I am not sure why it doesn't show when I create the issue out of DSWP.
Thanks
Paul -
Extraction of solution manager ticket content
Hello Experts,
I need to extract the content of each ticket recorded in solution manager including Issue descriptions, solutions recorded in the ticket etc. May I know if there is any standard report or if they are stored in a transparent table?
Thanks a lot in advance!
SusanHi Andreas,
thanks for posting your opinion to the topic. What I´m looking for, is the right link to support a process driven SAP-implementation process. The question is, which is the right tool or repository to collect implementation know-how and information about SAP-defined or in anterior projects defined individual business processes and the enabling systems, transactions, services ...
There is such functionality in SAP Solution Manager.
Are there other products, repositories I have to look on, or do you think Solution Manager is the organisational SAP-governance plattform to link implementation methodology, business processes, configuration and functionality?
I´m not believing in anything in that question! I´m only looking forward to your individual opinions about that issue to form a view on it.
Thank you all!
Jens
Maybe you are looking for
-
I have an Ipod nano 6th gen, that originally worked when I got it, for like the first week or so. Now after transfering some 600 songs, it doesn't appear when I plug it into my desktop, or itunes. I even tried it on some family computers, and it stil
-
Viewing a document created on ios on my Mac with Pages 5.0 wihtout sharing via icloud?
I have Pages 5.0 on my ios device and Mac. When I create a document on my Mac in Pages it will automatically appear on my Pages app on my ios. But when I create a docuemnt on my ios it will not generate on my Mac. I'm pretty sure it used to do this b
-
I have '09 and use Entourage as my email client. For some reason when I updated to '09 I can't drag photos into an open email. Not sure if it's an issue with Entourage or iPhoto, but it did work fine prior to my upgrading. Any suggestions?? Also, asi
-
Hi I have problem with Distinct clause in Physical SQL getting generated. It has distinct by defaul. I searched through this blog and found in BMM-->Content Tab and "Select Disctinct" is not check for any of my tables used in Report/Query. Still it f
-
What is the problem with this script. it is giving invalid table name error
declare l_cnt number; v_sql varchar2(1000); table_name1 varchar2(1000); begin for i in ( select table_name from all_tables ) loop table_name1 := i.table_name; v_sql := 'select count(1) from :table' ; execute immediate v_sql into l_cnt using table_nam