Solution Manager XML file

Hi Everyone.
This is a brand new implementation. The implementation consists of ERP 6 EHP5 and SolMan 7.1.
I was able to install the SolMan and completed initial and Basic configuration. I am also connected to sap.service market place.
My question is, I have not installed my ERP EHP5 system yet and how do I generate the XML file for a system that has not been installed? Also I am not sure what is the best way to define the system in SolMan so I have a error free definition. Therefore I can generate the xml file for the support pack and EHP5.
This is what I have done:
Client copy of 000 to 100
initial config
Basic config
I need to connect to SAP to download support packs for SolMan to upgrade to SP27.
Please provide links to the documents.
Regards

So you need to upgrade to 7.1? Or You need to install SP27?
See this link below:
https://websmp102.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=00200797470000065932
And in this select what relaease and what activity you are looking to perform after you select the release (install or upgrade)
I could not provide direct links because I do not understand what is it that you are trying to do.
You need to start with the MOPZ setup though, if you are looking to download support packs et all from the Service Marketplace

Similar Messages

EHP4 solution manager xml file not supporting

Hi Support Team,
Here we are in middle of installing ehp4 installtion struck with an
error : "Error reading stack info . freturn code=-1,Reason = "the stack
configuration is not valid for the system HDC,inst no. 0020592069."
Here our HDC is ERP system where the EHP4 installation is
undergoing.Please find the screenshot attached.
SApehpiconsole log : (last 200 lines)
A trouble ticket and an archive with all relevant log files have been
generated.
Trouble ticket: "/oracle/EHPI/abap/log/SAPehpi_troubleticket.log"
Log archive: "/oracle/EHPI/abap/log/SAPehpi_troubleticket_logs.sar"
01) * Repeat phase SPAM_CHK_INI to continue at the point it stopped
02) - Restart the current module from the beginning
03) - Exit this program
Choose action: Repeat phase SPAM_CHK_INI to continue at the point it stopped
>> 2010/03/15 11:45:53 START OF PHASE PREP_CONFIGURATION/SPAM_CHK_INI
>> 2010/03/15 11:45:56 END OF PHASE   PREP_CONFIGURATION/SPAM_CHK_INI
>> 2010/03/15 11:45:56 START OF PHASE PREP_CONFIGURATION/RUN_RSUPGSLI
Starting of Configure selective-language-import option in batch (job RSUPGSLI)
working ...
>> 2010/03/15 11:46:00 END OF PHASE   PREP_CONFIGURATION/RUN_RSUPGSLI
Execution of PREPARE module "Configuration and language selection" ends at 20100315114600
Execution of PREPARE module "Extension module for start release >= 40B" begins at 20100315114600
>> 2010/03/15 11:46:00 START OF PHASE PREP_EXTENSION/UPLOAD_REQUEST
Uploading data ...
>> 2010/03/15 11:46:07 END OF PHASE   PREP_EXTENSION/UPLOAD_REQUEST
>> 2010/03/15 11:46:07 START OF PHASE PREP_EXTENSION/SELSTACKXML
>>>> Stack configuration <<<<
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the BIND_PATCH phase is taken from there. For
more information, see SAP Note 1022704 .
You need to include an Enhancement Package into the procedure. Please refer to
the manual for further information.
01) * Provide stack configuration file in input field below
Select configuration:: Provide stack configuration file in input field below
STACKFILE: /sapcd/SMSDXML_HDC_20100308092914.238.xml
>>>> Stack configuration <<<<
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the BIND_PATCH phase is taken from there. For
more information, see SAP Note 1022704 .
You need to include an Enhancement Package into the procedure. Please refer to
the manual for further information.
01) * Provide stack configuration file in input field below
Select configuration:: Provide stack configuration file in input field below
STACKFILE: /sapcd/SMSDXML_HDC_20100308092914.238.xml
>>>> Stack configuration <<<<
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the BIND_PATCH phase is taken from there. For
more information, see SAP Note 1022704 .
You need to include an Enhancement Package into the procedure. Please refer to
the manual for further information.
01) * Provide stack configuration file in input field below
Select configuration:: Provide stack configuration file in input field below
STACKFILE: /opt/SMSDXML_HDC_20100315065507.342.xml
Please guide us accordingly.
Regards
sap123

Hi Gurus
I am facing the same issue in configuration phase.
The error is "Error reading stack info.
       Return Code = -1, Reason = "No vendor specified"
Our Solution manager is on EHP1 now and we are facing this error after ehp1 upgrade, earlier we did one ehp4 upgrade test successfully with solution manager 7.0 before. But after upgrading solution manager to EHP1 we are facing this issue.
Can anyone help me on this....
Waiting for your response.
Thanks
Khalid

How manage XML files

HI,
i am working in a big game ,for each section of this i need to load three or four XML files.
can i store this XML files once it loaded ? this method will effect server memory and speed..?
how manage xml files ( good oops methods)..?

load each xml file once. use different xml instances for each xml file. you can reference you xml instances any time after loading is complete.

Solution Manager trace file ? Details of all systems messages ?

Hi,
I had developed custom applications involving different systems like IDES, R/3, File system and web services and BPM scenarios.
These systems are integrated with XI, and now I want to monitor the message exchanges between these systems.
I need all information (in form of txt or log trace file) containing
which systems are involved. Parameters used during communications data exchanged between them or message header, content of the messages etc.
As far as I know log files contain lot of information about user activities like transactions executed, messages exchanged between systems etc......I already tried to monitor the log files at XI level, but it contain very less information about the executions.
Solution manager and remote systems configurations are already done.
I have the following questions.....
1) Will Solution manager be the right choice to monitor such information ? If yes, then where and how ?
2) Is there any combined log file in solution manager which contain all log information about the connected systems ?
3) Where I can find the log files of solution manager ? (Is there a single file which contains all information?)
4) How communication (message exchanges) between composite applications is monitored in SAP ?
How to switch on tracing for Log file (which trace level and what settings), offcourse it will generate lot of data
Regards,
hussaan

Hi,
Please download that attachment "scripts_1139623.sar" provided in SAP Note 1139623 - Using transaction RZ20 to monitor remote Oracle databases.
Upon extraction of scripts_1139623.sar the following files you will get.
rz20_nonabap.sql
dbcheckora10_oltp.sql
dbcheckora.sql
Then Perform the below mentioned Steps to resolve your issue.
Step 1: Create tables DBCHECKORA and DBMSGORA:
sqlplus SAPSR3DB/<pwd>
SQL> @rz20_nonabap.sql
Step 2: Fill the table DBCHECKORA:
sqlplus SAPSR3DB/<pwd>
SQL> @dbcheckora10_oltp
Step 3: Create the synonyms (as user ora<sid>):
brconnect -u / -c -f crsyn -o SAPSR3DB
sqlplus "/as sysdba"
CREATE PUBLIC SYNONYM SAP_DBSTATC FOR SAPSR3DB.DBSTATC;
CREATE PUBLIC SYNONYM SAP_DBCHECKORA FOR SAPSR3DB.DBCHECKORA;
CREATE PUBLIC SYNONYM SAP_DBMSGORA FOR SAPSR3DB.DBMSGORA;
Step 4: Grant Privileges for OPS$<SID>ADM User for the above created Tables
sqlplus "/as sysdba"
grant all on SAPSR3DB.DBSTATC to OPS$<SID>ADM;
grant all on SAPSR3DB.DBCHECKORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBMSGORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTAIHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATIORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATTORA to OPS$<SID>ADM;
commit;
Step 5:
Now after successful execution of above mentioned Steps , in DBACOCKPIT (system configuration), try to save the Remote DB entry with "Collect Alert Data". It will be saved without any error.
If you find any errors, post the error contents as a reply of this thread message.
Regards,
Bhavik G. Shroff

Solution Manager sim files

Hi everyone,
Where are all sim files information in the market place. Can anyone give the path where all sim files located for soliution manager configuration as I am new to the SOLMAN.
Cheers
Murali

Hi
go to
http://service.sap.com/rkt --> solution manager --> SAP Solution Manager 4.0
Thanks
Prince Jose

Solution Manager 4.0 Presentation

I need to give a presentation on Solman 4.0.
Does anybody have any sort of multimedia presentation handy...or PDFs etc.
Please reply or point me to a link...preferrably a Powerpoint presentation.
Thanks
Pree

Hi Pree,
SAP Service Marketplace provides many presentations on SAP Solution Manager. File format is in general .pdf
http://www.service.sap.com/solutionmanager
-> Media Library
> Overview Presentations
.........SAP Solution Manager - Overview (.pdf)
.........SAP Solution Manager - Scenarios (.pdf)
> Use Case Presentations
.........detailed presentations on each use case
Best regards
Ruediger Stoecker

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

MOPZ has issues calculating stack XML file in SOLUTION MANAGER

Hello,
We have a SOLUTION MANAGER system on NW 7.0 EHP1 SP stack level at initial support stack (ISS).
Recently we upgraded all our R/3 systems to ECC6.0 EHP4 SPS04 and now we are trying to upgrade the stack level to EHP4 SPS07. So we are trying to get a XML file from MOPZ but no luck.
The backend system has all the correct data updated in SMSY and all looks fine but while we try to calculate the stack for EHP4 SPS07 it ends with error like below mentioned.
Please look into the errors and throw some light if anyone has come across the same.
Error details:
System Messages
Type Message Text
Error The Installation/Upgrade Package for Add-on EA-APP L rel. 600 is not available
Error ABAP queue check failed
But the backend system has EA-APPL level at 604, we do not know why it is looking for installation/upgrade package for
EA-APPL 600.
Regards,
Yoganand.V

hi
can you check the sap note
1. Note 1277035 - Solution Manager: EHP4 product data missing
might be this could be the reason for your issue
or
check the thread already discussed the same and the solution also provided
[EHP4 upgrade error on SAPK-603DHINEAPS|EHP4 upgrade error on SAPK-603DHINEAPS]
////////////////It seems that there is a small bug in teh software vector for EA-PS.
Essentially, SAINT prevents you from going forward because it thinks that you don't have the correct version of EA-PS installed.
The solution for this is described in OSS Note: 1143022
"To import EA-PS in a system that already has the level EA-APPL 604, load the attached file ACP_EAPS.SAR into your system (SPAM-> Support Package -> Load Packages -> from Frontend) before you start the import using SAPehpi. Otherwise, an error may occur in the queue calculation, which can be solved by reloading the ACP"////////////////////////
check and update
Jansi

XML File in Solution Manager

How to Generate XML file in solution manager for EHP5 upgrade

Hello,
You can find links to many interesting documents and also some troubleshooting guides at https://wiki.sdn.sap.com/wiki/display/SM/Maintenance+Optimizer
Best regards,
Miguel Ariñ

XML Interface in Solution Manager

Hi All,
In Solution Documentation presentation, there are slides that give details on importing documentation from external sources like(Excel) into Solution Manager documentation. Has anyone done this task and what is the interface used to export to standard SAP XML format from EXCEL and import files from XML format into soution documentation (SOLAR01)?
Details from slides are:
Using a XML interface business process documentation of external sources like MS Excel, Lotus Notes can be efficiently imported in SAP Solution Manager
Data transfer process flow:
Detailed steps
1. Develop a data extractor program to convert MS Excel to XML document
- Create a program to extract content from data source. The extractor has to use the xml schema definitions provided by SAP
- Extract the data from the data source into XML format
Benefit
Quick and efficient method to transfer external documentation into SAP Solution Manager
Detailed steps
Use SAP Solution Manager interface to import XML documentation
- Import the data into SAP Solution Manager within SAP Solution Manager
- Verify the imported documentation
Thanks and regards,
Nischal

Hello,
You can find links to many interesting documents and also some troubleshooting guides at https://wiki.sdn.sap.com/wiki/display/SM/Maintenance+Optimizer
Best regards,
Miguel Ariñ

Display of Solution Manager file

Hi,
While I try to browse the solution manager file (.ssm) from the portal it displays the file in a XML format. Can anybody resolve the issue?
Thanks
devara

When you have a file inside the par-file (not inside the PORTAL-INF directory), then the url to this file is http://portal:50000/irj/portalapps/par-file-name/filename
Example:
com.test.par contains /test/testfile.txt
then url is http://portal:50000/irj/portalapps/com.test/test/testfile.txt
In SAP Developer studio project, these files are located in the /dist direcotry in the project.
If you want to have the file in the PORTAL-INF directory, you can code portal component, which returns the file as content.

Error while Importing ResourceObject xml file in Deployment Manager

Hi Everyone,
I am getting this error while doing Import of HRPeopleSoftResourceObjects.xml ( A Resource Object xml file) in Deployment Manager. I am doing this step for Authoritative(Trusted Source) Reconciliation.
Error Says:- Attribute not present in EntityDefination of User :: ExpectedReturnDate.
ExpectedReturnDate is a UDF (Customize) field. I did Metadata and Sandbox import for this field to create this attribute in OIM. I can see this attribute on User Details screen as well as in User Table in OIM. So, ideally this error should not popup. I have to do this import for Reconciliation.
I pulled and checked all the xml files like(UserEO.xml.xml, userEO.xml.xml, userVO.xml, UserVO.xml.xml) from oracle.iam.console.identity.self-service.ear_V2.0_metadata1 and found ExpectedReturnDate field is available.
I am using: OIM Version - Oracle 11g Release 2
Database version - 11.2.0
Weblogic version - 10.3
Please let me know how to resolve this error.
Appreciate your response and support!
Warm Regards
Vijay Kumar

Appreciate your response Kevin!
I saw your response today. What you have suggested in your post make perfect sense to me.
Yesterday, I was able to create Reconciliation profile successfully. No idea how it worked so, didn't updated my post.
I tried to re-import the UDF, noticed ExpectedReturnDate attribute has little icon in fornt of it on deployment manager screen which says on mouse over "new field". No idea why as I didn't delete it from anywhere, perhaps it didn't get imported properly previously. I stepped ahead and clicked the import button on deployment manager but failed as it was throwing an exception which says udf_usr_expectedReturnDate is available in usr table. That makes sense to me as this column got created in usr table in OIM because of previous import and I didn't delete it either. This raised couple of doubts more as, along with this attribute there were other attributes in the same metadata xml file which were part of previous import and their respective columns were already created in usr table. Then why message poped-up for this field in particular? Anyway I went ahead with the import process.
Now I stopped all the server (Admin, SOA and OIM) and restarted them again and performed the same steps as mentioned above and this time it worked as expected. UDF file got imported successfully.
After this I went to Design Console verified all the fields and created the Reconciliation Profile. I checked OIM database and found RA_ProfileName recon tables got created.
As per your comment, Today I checked the RECON_USER_OLDSTATE table but this table is empty.
Still I have couple of doubts, if Reconciliation Profile got created it should create the xml file under metadata direcectory(in my case path should be: /apps/Oracle/Middleware/Oracle_IDM1/server/metadata/db). Please correct me if I am wrong? I hope it should be physical file not a logical file.
Once again thanks for your response!
Warm Regards
Vijay Kumar

Error while importing xml file in calc manager

Hi All,
I am having trouble in importing the xml file for calc manager. I have used the rules migrator utility to convert the .rle file into XML. Now when I import this xml file in the calc manager it gives me the following error- "An invalid application 'XML file name' was found on object Main_Global". Please let me know how should I import the xml file in calc manager and get it deployed. Thakns in advance for the help.
-Kamran

Hi All,
I am having trouble in importing the xml file for calc manager. I have used the rules migrator utility to convert the .rle file into XML. Now when I import this xml file in the calc manager it gives me the following error- "An invalid application 'XML file name' was found on object Main_Global". Please let me know how should I import the xml file in calc manager and get it deployed. Thakns in advance for the help.
-Kamran

XML file error while loading import manager

Hi all,
I am new to MDM.
I have archive repository(.a2a file),xsd files,import maps and export maps.I have unarchived the repository in console and I am trying to load import manager by selecting the file type as XML schema, client system as MDM, XMl schema name and file name as XML file of given XSD in import manager folder of server.
I am getting error like "failed to parse XML file".
Please help me out regarding this.
Thanks in advance.
Ravi.

Hi ravi,
Is it MSXML 4.0 SP2 parser?
<a href="http://www.microsoft.com/downloads/details.aspx?FamilyID=3144b72b-b4f2-46da-b4b6-c5d7485f2b42&DisplayLang=en">http://www.microsoft.com/downloads/details.aspx?FamilyID=3144b72b-b4f2-46da-b4b6-c5d7485f2b42&DisplayLang=en</a>
Try installing this and let me know.
Thanks and Regards,
<b>Sagar Sonje</b>
Message was edited by:
Sagar Sonje

How to transfer an xml file to NW Portal Knowledge Management from XI?

Hi all,
Anybody knows how to transfer an xml file to NW Portal Knowledge Management from XI?
What kind of adapter type I have to choose? And which procedures I have to do in KM Portal? Create a folder, what kind of folder and permissions?
Suggestions and ideas are appreciated.
Thanks in advance,
Ricardo.

Hi
Can anyone tell me how XI sends messages to applications like J2EE. In REceiver comm channel, I think we specify about the target system like J2EE appl.
Aadapter Type: HTTP
               Receiver
Transport Protocol: HTTP1.0
Message Protocol:    XI payload in HTTP body
Adapter Engine:      Integration Server
Addressing Type:     URL address
Target host:         localhost
Service Number:      7001(Port number of Weblogic appl server--where my J2EE appl is deployed).
Path     : /Invoke/DisplayRes/
Authentication Type:Use Logon Data for SAP System
Content Type: text/xml
Username:   xiappluser
password:   xx
XML code:   UTF-8
I suppose XI sends msgs to http://localhost:7001/Invoke/DisplayRes/........
in this example if am correct?
Then I have given all tyhe necessary setting but my servlet is not able to display XML msg in browser?
This is my servlet code:
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
     PrintWriter out = response.getWriter();
     BufferedReader brin =new BufferedReader(new InputStreamReader(request.getInputStream()));
     String inputLine;
     StringBuffer sBuf = new StringBuffer();
        response.setContentType("text/xml");
     while ((inputLine = brin.readLine()) != null)
         sBuf.append(inputLine);
         out.println("hi");
            out.println(sBuf.toString());
         brin.close();
         out.flush();
What went wrong?
Help me, all helpful answers are highly rewarded.
Thanks

Solution Manager XML file

Similar Messages

Maybe you are looking for