Solutions to overcome IP conflicts between sites

The company I work for recently bought out another company. Currently we haven't found the need to integrate them into our network but that some will come about in the near future. The problem we have is that both our internal networks are utilizing 10.x.x.x space and are too large to re-IP our networks. We have a VPN tunnel set up with them and are NATing them to selected resources at the moment but this is not a scalable solution moving forward. I'm looking for ideas/solutions to overcome this problem.

I think we would need more detail to understand how the engineer sees it working.
As I say VxLAN would allow you to merge the same IP subnet in both sites into the same vlan so that vlan now extends between sites.
Whether you want to do that is another matter.
Again, as far as I understand it, VxLAN is generally used in virtualised environments in DCs and I haven't see any cases of using it to extend client vlans in the way I think your engineer is proposing.
Doesn't mean it couldn't be done and I haven't used it so I wouldn't like to say one way or the other but I would have thought there would be new kit you would need eg. VxLAN gateways etc.
But like I say, as far as I can see, even if it was possible what he is proposing is to extend your L2 vlans between the companies and I would think carefully about that.
In addition I can't see how it would solve the problem of two devices using the same IP address as they couldn't exist in the same vlan.
Sorry I can't be more specific but I have no direct experience with it. I would certainly want to see some sort of proposed design etc. from the engineer though and all the implications spelt out before you go down that road.
Jon

Similar Messages

Conflict Between HP Universal Print Driver 6.0 and Office 2013

Has anyone else noticed a conflict between the HP UPD v. 6.0 and Office 2013? We are running a Citrix environment with Office 2013 installed on a couple of application servers. Almost all of our printers are HP's, and we were trying to use the latest UPD (6.0) on our print server. However any time users print out of Outlook (yes people still do that) it crashes out and needs to be restarted. Printing from other applications works just fine. As a test I have tried the UPD v 5.8 and it seems to work ok. Obviously I've found a solution I was just curious if anyone else has noticed this conflict.
This topic first appeared in the Spiceworks Community

You're probably getting the "Windows cannot locate a suitable printer driver" error if you're trying to add the driver while adding a printer that is shared over the network. You see, HP's Universal Printer Driver (UPD) doesn't contain the PnpIDs of every printers it supports, so when you specify HP's UPD as the drivers for the network printer, if Windows can't find a match for the printer's PnpID it spits out the driver isn't compatible.
The way to overcome this is to install a "generic" printer locally, using HP's UP driver, and change the port afterwards to point to the shared printer. So, first, add a local printer (that will be using the LPT1 port - make sure no printer is attached!), and click on "Have disk(s)" to browse to and select HP's UPD. Going through the remaining steps should install a locally-attached printer named something like "HP Universal Printing PCL 5" (or "[..] PCL 6"). You'll then go in the new printer's properties, on the "Ports" tab, and click on "Add Port...". If you're installing a shared printer, you'll select "Local Port", click on "New Port..." and specify the path to the printer (e.g. \\myserver\hplaserj) as the port name. Those steps should do the trick.
Last thing: beware, though, as HP's UPD PCL 6 might not be compatible (anymore) with your LaserJet 4050, as they use a PCL XL class number/revision (class 2.1; sort of a version number of the protocol) that is higher than what your printer's firmware might support for PCL6 (should be class 2.0) I know the latest versions of HP's UPD PCL 6 doesn't work with our LJ 4000 & 4050 printers, so you might have to use the PCL5e driver for those 64-bit workstations.
Background info:
PCL XL error on Laserjet 4550n with PCL 6 driver [IT Resource Center Forums]
Universal Print Driver PCL6 broken on LaserJet 4000 [IT Resource Center Forums]
Printer Command Language [Wikipedia]
Let us know if it works.

How can i troubleshoot a "software conflict between a device and something in my original user account"

hi
my canon video camera (HV20) wasnt being recognised by iMovie (error message...in system report was "Unable to list FireWire devices".)
in researching a solution i came across some firewire advice in http://support.apple.com/kb/HT1151#trouble which suggests there may be a "software conflict between the device and something in your original user account."
i changed to another account on my iMac and my camera connected immediately.
is anybody able to explain how i go about fixing this "software conflict".
many thanks
Carlo

With the Mail.app quit and using the Finder, go to Home > Library > Mail > Mailboxes > Outbox.mbox.
The Outbox.mbox represents "Out" in the mailboxes drawer and is shared by all accounts.
Delete the Outbox.mbox and empty the Trash.
Launch Mail and a new Outbox.mbox will be created automatically by Mail within the Mailboxes folder and this should resolve the problem.

EPM V10 issue : Install conflict between PCM 10 & BPC 10

Our team is working on a prototype of EPM 10 solution (BPC 10 & PCM 10). We have met 2 conflicts between BPC 10 and PCM 10 at client side (Excel & Internet Explorer):
1. There are 2 separate EPM Add-in for Microsoft Office (Excel). One for BPC and another for PCM. We should install EPM Add-in PCM at first, otherwise we can't install it after BPC. Obviously EPM Add-in for PCM is a previous version refering to that of BPC.
But after installation of EPM Add-in PCM then BPC, we lost the "Data Manager" tab in Excel ribbon.
2. After installation PCM 10, we canu2019t access BPC via Internet Explorer any more. IE shows u201CAdd-on can not work u2026u201D. But we can open BPC Web client via Chrome. Is there any conflict of the ActiveX between PCM & BPC for IE ?
Thank you for any proposition & solution.
Kind regards,

Maybe I don't understand your description of the problem clearly, but I want to state that there is intended to be only 1 EPM 10.0 add-in for Excel which works with both BPC and PCM.
Also since both the products you mention are in Ramp-Up currently, feel free to reach out to your customers ramp-up coach(es) to assist further.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Conflict between one or more third party MIDI or audio drivers

I have a Logic Pro 8 session with 17 audio files, each one of which have 2 to 4 plugins.
Every time I try to bounce the session to an .aiff or .mp3 this dialog box appears:
Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older or unused drivers.
I haven't installed any extra drivers/midi controllers/software. I just work entirely with Logic and an M-Audio external card (which is unplugged and audio preferences set to Built-In Input). And anyway, this issue arose after having recorded all the audios, after doing the editing, so no other possible installation move was done.
Please, help me find a solution.
Thanks.

I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
Nothing on User/YourName/Library/Audio/MIDI Drivers.
I have found 3 AVID folders on Applications:
- Avid MetaSync Manager
- Avid MetaSync Publisher
- Avid_Uninstallers
Shall I remove these?
There is also an empty folder called Digidesign on User/Library/Audio/Plugins
I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

[JS CS3] Conflict between palettes and panels

Hello,
I am having a conflict between panels and palettes. Hopefully I can get some direction without having to copy the code here, because it is very long.
I have a window of the palette type. This palette has buttons and radio buttons. The buttons call up various functions.
The radio buttons, however, make visible/invisible a series of panels in the palette. The panels are stacked upon each other, only one of which is visible at any one time, depending upon which radio button is selected.
One of the buttons in the palette calls up another palette (which also has a series of buttons for various functions). Let's call it the little palette. The problem is, that after the little palette is called up, the radio buttons in the big palette no longer work. I can select them but they will not make visible/invisible any of the stacked panels. The buttons in the visible panel work as well as all the other buttons that are always visible. The only thing that does not work are the radio buttons.
My only workaround is to just dismiss the palette and call it up again. But I'd rather fix this bug.
Any ideas? If I need to I can strip down the coding leaving only the essentials, but rather not take the time if this is a problem others have run into and hopefully have a solution for.
Thanks,
Tom

Thanks. I'll give it a try, but I even uninstalled both programs, tried
reinstalling Reader only, and when that didn't work, uninstalled Reader and
then reinstalled Acrobat. Still a problem. The particular website is
www.officeally.com, and it opens the PDF file in a browser window, I believe
using an ASP file.
Larry

Conflict between audigy and Olympus voice recor

I have an audigy se recently installed. Seemed to be working fine until I opened my Olympus voice recorder program. Just opening the program knocked out the sound card and I could not get it back again. No speakers in any application on the computer except the diagnostic test. Then the speakers would play. But no cd's, no wav files, no nothing. Tried checking and unchecking all the boxes. There really aren't that many. Only way to solve the problem was to uninstall and reinstall audigy and not go to Olympus anymore. I've done that several times to confirm that is the problem.
Any suggestions?
(5. sourround)

Bazbear wrote:
Could anyone help me to resolve the conflict between my Soundblaster Audigy 2ZS and Norton antivirus. The auto protect feature is constantly being turned off on boot up. According to Symantec the problem is caused by conflict between the two soft wares. The Creative page does not mention this at all and the work around on the Symantec site either does not work or entails time wasting closing of programs and re-boots. It is really getting to me now and I wonder if any one knows of a permanent fix?
Bazbear
Some past post here mention of this too.....and the mods suggestion does indeed helped some of them resolve it. Perhaps you can try it. What you need to do is uninstall all Norton and Creative software. When you're done with that, install Creative software first follow by Norton stuff.

Version conflicts between host labview and RT engine

there is problem that i cannt switch target to feild point. It said that "version conflicts between host labview and RT engine" . But my labview is version 7.0 and the real time module is version 7.0 too. Anyone can give me hand? Thanks

Depending on your version of MAX, you should be able to change the version on the FP (in remote systems). If you can't do it in 3.0, try upgrading to 3.1 (you will have to search for it on the site). If that doesn't work, you can try resetting to factory default and then see if you can do this.
Another tip, which for some reason seems to help, is updating the OS\Run-Time Engine when windows is in safe mode.
Try these and see if they help.
BTW, as a tip for next time, you're more likely to get a good answer for something like this if you post in the FieldPoint board.
Try to take over the world!

GarageBand has detected a possible conflict between one or more third party

I have 200 computers that when you launch GarageBand 3.0.5 it comes up with the error:
GarageBand has detected a possible conflict between one or more third party MIDI or audio drivers
Our image is basically 10.5.6 with mainly Adobe CS 3 suite. No other sound programs or anything sound or video related was installed besides iLife 06 and I'm not sure what is causing the issue. I have tried reinstalling iLife 06 and run all updates available from Apple and repairing permissions. I have went through the plugins in /Library/Audio folder and haven't had any luck at all.
What gets me is under the admin account I have it working fine by removing the default emagic plugin in /Library/Audio/ etc.. but if I log in as a regular user without admin privileges i get the error.
I have tried deleting pref files in the users Preferences folder, but I just can't find a workaround.
It kinda seems to be like a permissions issue since the Admin account works, but I have tried pushing permissions 777 to /Library/Application Support/ and to /Library/Audio and to /Applications/Garageband.app and still no results.
I was blaming an Apple update because things worked fine before, I'm not sure what caused it. I reinstalled the combo update and that didn't help either.
I reformatted and installed 10.5 and upgraded using the combo updater to 10.5.6 and installed iLife 06 and installed all available updates from Apple like I have in the image and things work fine.
But I need to get this working on our image.........Anyone have any ideas as to what could possible be the issue and might know a fix????
Google searches the solutions I have found are repairing permissions and deleting plugins. I have tried repairing permissions and have no plugins besides the defaults, but I have already removed the emagic one and nothing else is in there.
Thanks!!

To get me through the year I deleted a bunch of Microsoft Office Receipts in /Library/Receipts and it fixed the issue.
I have no idea why, deleting a receipt from another app shouldn't affect anything, but it worked. I spent many hours trying to figure out a solution and this worked!
We are running iLife 09 now and no issues so far!

Trustsec Mac Encryption Between Sites

Hi,
See attached - might make question more clear
we have a layer 2 connection between sites using a local provider for the link. On the remote side is a 3750-X and on the Main Campus side is a 2960. The link is connected via a VLAN. The VLAN interface exists on the Main Campus 5548, core switch
From What I understand, Trustsec cannot be configured on a logical interface but, if we were to configure the logical interfaces as a physical interfaces could we encrypt traffic between the 5548 and the 3750-X?
Even though it would also have to traverse through the 2960 as well?
And traverse the Layer 2 WAN link?
Any other suggestions for accomplishing this?
Thank you, Pat

No, it is not supported on the 2960 series. Also, if you want to encrypt traffic between sites, a better solution is to use IPsec tunnel, but you need a firewall or a router in each location.
It doesn't have to be anything expensive if you don't need a lot of bandwidth.
I use these and they work really well.
have a look:
http://www.amazon.com/Juniper-SSG-5-SB-Security-Services-Gateway/dp/B000IZDN88
HTH

I have a conflict between Firefox Version 5 and both Ebay and Fasthost Sitebuilder image uploads.

Since upgrading to version 5 of Firefox subscreens of ebay are not displaying, Fasthost Sitebuilder has stopped allowing the import of pictures and I am being logged out of secure sites before transactions are completed.

I encounter immediate problems on installing Firefox 5. There were 3 Windows 7 crashes and I could not access Firefox. It was determined that there was a conflict between the anti virus program and the 5 version. There is no download for the older version 4 was not available. After trying several fixes, nothing worked.
One post indicated that Mozilla was not fixing Firefox 5 and that the fixes were made in Firefox 6 version. Reluctantly, I upgraded to six and , to my amazement, it works again. Nothing ventured, nothing gained!! Hope it works for you.

Logic Pro *8 has detected a possible conflict between one or more...

NOTE: This has NOTHING to do with opening Logic 7 sessions in Logic 8. This warning repeatedly pops up when starting Logic Pro 8, and when opening new sessions, and when adding tracks...and it's just unbeatable.
Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
I only suppose this could be either the Oxygen 8, or Digidesign 002 drivers? But Im certain that I do NOT use the 002 drivers.
Anyone know about this? I only started seeing this problem after upgrading to both Leopard, and Logic Pro 8.
Could my dongle be the problem? Hehe, I still have that plugged in from Logic 6!
Ouch, this problem is so persistent I'm going to go back to Logic Pro 7.

hi.
Having just experienced this problem, I tried reinstalling the pace InterLok Extensions but this did not help. I then uninstalled the extensions (using the uninstaller script provided by pace) and now everything works. I need pace for some software i own so this is not a permanent solution for me...
(I experienced this problem using logic 7.2.3 on OSX 10.4.11)
Message was edited by: damien lock

TS1702 What is 0xE8000004 error? What causes this error? Any solutions to overcome this error.

I am facing this problem whenever I try to copy apps on to my iPhone 5. The problem does not arise for all the apps, just for a few ones.
What is 0xE8000004 error? What causes this error? Any solutions to overcome this error.

It's an internal server error. There's a problem with the .jsp coding on the site. If it's someone else's site, there's not much you can do about it until the administrator realizes there's a problem and fixes it.
If it's your own site, you need to check the Java Server Pages coding. Very few people, if any, with JSP experience frequent this forum.

What is difference between Site template and web template

What is difference between Site template and web template

Both are almost same, are you referring to Site Definitions vs web template?, if so, refer to the following post
http://blogs.msdn.com/b/vesku/archive/2011/07/22/site-definitions-vs-web-templates.aspx.
--Cheers

Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

Hello All,
As per my requirement I have a two custom list.
Agent Details
Port Name
Agent Details contains Agent code, Port Name, email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list.
After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
name list) to Agent Details custom list.
Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
Is anything am doing wrong then please guide me.

Hi,
As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
The articles below are about how to debug in the event receiver in SharePoint 2010.
http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
http://sharesaint.com/?p=77
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Solutions to overcome IP conflicts between sites

Similar Messages

Maybe you are looking for