Solved: adb won't list android device

I was banging head against this for a few days.  I tried all the udev rules out there.  Then realized they didn't apply if running as root. so I google my device id and saw a post about usb_modeswitch (http://www.draisberghof.de/usb_modeswitch/) I installed the package and problem is solved.
Hope this helps.
Regards,
Brian

I use the AUR package android-udev.
The google part is :
# Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666", GROUP="adbusers"
# NEXUS S
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e21",
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", SYMLINK+="android_adb"
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", SYMLINK+="android_fastboot"
# Nexus One
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e11",
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e12", SYMLINK+="android_adb"
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="0fff", SYMLINK+="android_fastboot"
# Generic and unspecified debug interface
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d00d", SYMLINK+="android_fastboot"
And I'm part of the adbusers Group.

Similar Messages

  • [SOLVED]Can't mount iPhone/Android devices.

    Hi,
    Since some update (can't tell exact update) I am unable to mount mobile devices on iOS or Android as a flash drive. It appears as "camera" in my "Available Devices" in KDE and when I try to open it with file manager, it appears blank.
    In journalctl I can see the reason, but don't know how to fix it:
    sep 11 12:32:14 laptop kernel: usb 1-1.2: new high-speed USB device number 11 using ehci-pci
    sep 11 12:32:14 laptop mtp-probe[20038]: checking bus 1, device 11: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2"
    sep 11 12:32:14 laptop mtp-probe[20038]: bus: 1, device: 11 was not an MTP device
    sep 11 12:32:14 laptop kernel: ipheth 1-1.2:4.2: Apple iPhone USB Ethernet device attached
    sep 11 12:32:14 laptop upowerd[2855]: usbmuxd_get_device_list: error opening socket!
    sep 11 12:32:14 laptop colord[709]: Device added: sysfs-Apple_Inc.-iPhone
    sep 11 12:32:14 laptop systemd[1]: Starting iOS USB Muxer...
    -- Subject: Unit usbmuxd.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit usbmuxd.service has begun starting up.
    sep 11 12:32:14 laptop systemd[1]: Started iOS USB Muxer.
    -- Subject: Unit usbmuxd.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit usbmuxd.service has finished starting up.
    -- The start-up result is done.
    sep 11 12:32:14 laptop usbmuxd[20052]: [12:32:14.302][3] usbmuxd v1.0.8 starting up
    sep 11 12:32:14 laptop usbmuxd[20052]: [12:32:14.303][3] Successfully dropped privileges to 'usbmux'
    sep 11 12:32:14 laptop usbmuxd[20052]: [12:32:14.311][3] Connecting to new device on location 0x1000b as ID 1
    sep 11 12:32:14 laptop usbmuxd[20052]: [12:32:14.311][3] Initialization complete
    sep 11 12:32:14 laptop usbmuxd[20052]: [12:32:14.312][3] Connected to v1.0 device 1 on location 0x1000b with serial number bda1b89b56ff882835c0790ebe27d9e74e163cec
    sep 11 12:32:14 laptop systemd-sysctl[20064]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    sep 11 12:32:14 laptop systemd-sysctl[20065]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    sep 11 12:32:14 laptop systemd-udevd[20035]: renamed network interface eth0 to enp0s26u1u2c4i2
    sep 11 12:32:14 laptop NetworkManager[389]: <warn> failed to allocate link cache: (-10) Operation not supported
    sep 11 12:32:14 laptop NetworkManager[389]: <info> (enp0s26u1u2c4i2): carrier is OFF
    sep 11 12:32:14 laptop NetworkManager[389]: <info> (enp0s26u1u2c4i2): new Ethernet device (driver: 'ipheth' ifindex: 27)
    sep 11 12:32:14 laptop NetworkManager[389]: <info> (enp0s26u1u2c4i2): exported as /org/freedesktop/NetworkManager/Devices/5
    sep 11 12:32:14 laptop NetworkManager[389]: <info> (enp0s26u1u2c4i2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    sep 11 12:32:14 laptop NetworkManager[389]: <info> (enp0s26u1u2c4i2): bringing up device.
    sep 11 12:32:14 laptop NetworkManager[389]: <info> (enp0s26u1u2c4i2): preparing device.
    sep 11 12:32:14 laptop NetworkManager[389]: <info> (enp0s26u1u2c4i2): deactivating device (reason 'managed') [2]
    sep 11 12:32:14 laptop NetworkManager[389]: <info> Added default wired connection 'Wired connection 3' for /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1....26u1u2c4i2
    sep 11 12:32:14 laptop kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s26u1u2c4i2: link is not ready
    sep 11 12:32:17 laptop kernel: traps: iphone-set-info[20040] general protection ip:7fd151259e86 sp:7fff6197fdf0 error:0 in libimobiledevice.so.4.0.1[7fd15114e000+1a000]
    sep 11 12:32:17 laptop systemd-coredump[20067]: Process 20040 (iphone-set-info) dumped core.
    -- Subject: Process 20040 (iphone-set-info) dumped core
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: man:core(5)
    -- Process 20040 (iphone-set-info) crashed and dumped core.
    -- This usually indicates a programming error in the crashing program and
    -- should be reported to its vendor as a bug.
    I've tried to mount iOS device with ifuse, but it didn't work either.
    Any idea?
    Thanks in advance.
    Last edited by Zack7777 (2013-11-11 10:13:26)

    Thanks for the answers.
    ewaller wrote:That looks like it is trying to treat your iPhone as a network interface.  Have you turned on USB tethering on your phone?  What happens if you turn it off?
    It's always like this, no matter if I turn on or off tethering.
    mzneverdies, donniezazen,
    Ok, this seems to work with android devices but not with iOS. Also when I run detect while my iPhone is plugged in, device list is empty:
    $ mtp-detect
    Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
    Listing raw device(s)
    No raw devices found.
    Main goal is to return support of iOS.
    Last edited by Zack7777 (2013-09-12 07:56:34)

  • [Solved] KDE 4.10 : Mounted Android Device as a Camera?

    I've been using Arch with MATE Desktop for a long time and then finally made a move to KDE 4.10. I love all features in KDE,
    and one of them is auto-mounting Android devices. The problem is, when I plugged in my phone, KDE doesn't recognized it as a USB Storage, but mounted it as 'USB PTP Class Camera'. (I'm using HTC One X)
    As a result of this, I can't copy any files to my phone. I have tried other ways such as using go-mtpfs (when I'm using MATE) but still failed. That was actually the main reason why I chose KDE, because of the auto-mount (Android) system. The auto-mount worked, but cut/copy/paste is not. Any help will greatly be appeciated!
    Last edited by Archer1X (2013-02-20 10:14:57)

    Problem solved. Yes, installing kio-mtp solved my problem. KDE is indeed a superior DE. Thanks mzneverdies. I really appreciate  your answer. (Before this I have tried kio-mtp-git from AUR, yeah because I followed the guide from ArchWiki but it failed to get the job done. Somebody please edit that part in ArchWiki.)
    Last edited by Archer1X (2013-02-20 10:16:03)

  • HP Utility won't list my device (Deskjet F380) in Mac OS 10.6.8

    Hi, I just downloaded the 10.6 drivers and software for my HP Deskjet F380 printer and I want to clean the print heads, but HP Utility doesn't show the device and won't respond when I click to add a device.
    The printer is connected fine and shows up in System Profiler and Print & Fax Prefs, and the ink levels show up too. It just won't show in HP Utility. So how can I clean the print heads?
    Thanks
    Sarah

    OK, let's get rid of the HP software altogether: 
    Uninstall the software using the 'scrubber' option:
    Go to Applications/Hewlett Packard/ click on HP Uninstaller
    Click on Continue
    Highlight your device on the left pane
    Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall This IS the Scrubber Option, there is no button labeled "Scrubber"
    There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
    Click Continue and let it finish
    Download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Now reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • ADB and FASTBOOT on Android devices are failed in Windows 8.1 RTM

    hii 
    I am using windows 8.1 upgrades laptop, on which i found that adb and fastboot drivers are not working. It is giving error (device
    failed enumeration)
    I have tried every possible way on internet to update the driver but no success.
    Please provide us the solution to work with it properly

    Hi,
    Based on my research, I suggest you try the following steps to see if it works.
    1.Press "Start Key/Windows Key + C" or move your cursor to top right corner of the screen to activate the Charm Bar and click on "Settings Button" as shown in following figure.
    2.The setting panel will open. Click "Change PC Settings" from the bottom as shown.
    3.You will have this PC Settings screen. Click on General Tab. and scroll down to the bottom to find "Advance Start up Option" as shown below and click on Restart. This is immediate restart so make sure all programs are closed and saved.
    4.Your PC will reboot into Advance Start Up option. And you will see following screen. Now simply press on "Troubleshoot" option.
    5..In troubleshoot click on "Advance Options”. In advance option select "Start-Up Settings" .
    6.Now just press restart button in Start-Up settings as shown below. Your system will reboot in Start-Up Option Mode.
    7.After your system is rebooted you will get this following screen. Here to choose options we have to use function keys. Now press "F7" to select "Disable Driver Signature Enforcement" .
    Now your PC will boot with Disabled Driver Signature Enforcement and you will be able to install Flashtool/Fastboot drivers.
    You can get this drivers from Post #2.
    If the issue persists, I think the ADB fast boot related driver had a compatibility problem with Windows 8.1.
    Also, I will forward this case to our product team.
    Regards,
    Kelvin_Hsu
    TechNet Community Support

  • Adobe Air won't install on android device.

    Just got a android phone to develop air apps on and guess what, the Adobe Air won't load.
    The phone (Virgin Mobile Optimus V = Mid-Tex Cellular LGE VM670) was just released.
    Does Adobe Air have minimum specs that have to be followed?
    Does the Adobe Air app have to updated with my phone to allow access on the android market .
    Some Air apps will show my phone, on others air apps do not (device ghosted) Including Adobe Air.
    Thanks

    I found this minimun specs:
    Android devices
    Google Android™ 2.2 operating system
    ARMv7-A processor with vector FPU
    OpenGL ES 2
    H.264 and AAC hardware decoders
    256MB of RAM
    The Optimus V has OS 2.2 and enough ram.
    Have to check the rest of the specs.
    The screen res is 320x480 and the processor is slow but has a gpu.
    I was surprised to see only 5 manufacturers certifided for Adobe Air Runtimes!
    There might be 50 manufacturers world wide making android devices.
    You would think the software would cater to the lowest common denomminator = minimun specs.
    I don't mind needing top of the line specs, that's OK makes sense, But not being able to sell an app
    because the manufacturer has not been certifided makes no sense.
    All manufacturers should have a top of the line device that meets the minimun spec.
    It limits your market.
    Sorry for the rant,
    want to buy a phone. Mint!

  • Setting Up Google Chrome Features for Cloud Printing from an Android Device

    These steps are organized for optimal setup procedure and to decrease the time it would take to set this option up from start to finish. This is a lengthy process and is more for possibly troubleshooting issues that may arise during the setup of Google Chrome's Cloud Print feature. However, if you have an Android phone or tablet and are interested in being able to print virtually anything at anytime from anywhere from your phone to any brand of printer regardless of setup, there is a way. And this is how:
    Open/Install Google Chrome onto a computer
    Sign in with personal email to access the same Google Chrome account you intent to print from
    Download Google Drive as an external storage you can access from anywhere
    Open Google Chrome Settings (three lines stacked on top of each other)
    Scroll down to the bottom of settings and click "Advanced Settings"
    "Sign in/add printers/manage printers" are three of the print options you may see here 
    Follow this link for information on:
    adding a classic printer to this option:  https://support.google.com/cloudprint/answer/1686197?rd=1
    how to add an HP ePrint email:  https://www.google.com/cloudprint/learn/printers.html#info-hp
    on registering the email of that printer (HP registration page):   https://www.google.com/cloudprint/learn/setup-hp.html
    8.  add the printer to this section of Google Chrome
    9.  at the bottom of the page you will see "Send a test page/print test page" (that will be useful later)
    10. at the top of this page is the option to share this printer with other Google Chrome users
    11. Open Google Drive from www.google.com (likely displayed at the top of the webpage)
    Can create a new document of any file type, upload, draw, etc
    Leave computer on if intending to print from off the network or another location
    The next steps are in regards to printing from a mobile device:
    Install/open Cloud Print App
    Add personal email account associated with Google Chrome
    Select printer management if on the same network as the printer
    Select Web tab and Google Drive if not on the same home network
    Find earlier test page in Google Drive Documents
    To locate other documents one could find many applications within this app or
     In another app like Documents To Go, you can select to send previously saved documents (like one might send an email on the Android) to the Cloud Print app to open, view, and print
    Print Test Document – this function means the printer has officially been added now
    In Google Drive, but within the Cloud Print app, you can select the printer that was added to this network or from "Printer Management Options."
    There are many ways to determine if your printer is still connected (offline, ready, etc.) but after confirmation that the printer is available, print jobs rest in the print queue until the printer receives the command to print.  Then the documents are stored and available for reprinting.
     Converts most print jobs to .pdf but prints most file formats from other applications as well
    In Printer Management advanced settings
    You can add a contact from the phone to use this printer
    Set as default
    See an extensive page of setup and printing options
    *After a test print while the computer was off the document did not print and the printer appeared offline until approx. 4 min after computer was rebooted, then the document printed automatically.
    Also if a document does not print, the troubleshooting guide on the phone suggested logging out of Google Chrome Cloud Print but I was unable to find that option it was suggesting (unable to log out)
    To completely finish adding any additional Google Chrome accounts that wish to share this printer using the suggestion in step 10, you must log into the email that was added and select ADD PRINTER from within the email that was sent for the confirmation and follow the link and instructions on how to do this from your email.
    Google Chrome and Google Drive support Windows, MAC, and Linux
    You can also change share options, privacy settings, etc. but if you choose to go with the two-step verification process, you may not be able to add your Google Chrome email account to the app without a 16 digit code generated within Google Chrome Privacy Settings for your app (not recommended)
    Now you have the option to also email any document to either the Cloud Print App or HP ePrint from the phone/tablet without actually accessing the app first.  Locate the document, press the menu button for more options, select "Send to" and a list of available apps will appear.  Choosing Cloud Print or HP ePrint sends the document or photo directly to the "print" function within the apps, instead of opening the app first and then searching for what it is you want to print.
    **computer connected to printer must be on**
    Requirements:  a) Google Chrome, Google Drive, and Cloud Print mobile app  b)  These steps outline the use of an Android device on the network for setup  c) will need the computer connected to the printer to be on at all times   d) go to this webpage http://www.google.com/cloudprint/learn/  if you have any more questions.
    Available features of Cloud Print App
    a.  Print all file formats from Google Drive (uploaded or create)
    b.  Has an internal notepad and drawing tool
    c.  Prints off all contacts and phone numbers as well as specified text messages
    d. The scan option actually just means take a picture
    e. Without Cloud Print Pro you get 5 days to test the features of printing Facebook pictures, Drop Box and Schedules before those features are no longer available
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!
    This question was solved.
    View Solution.

    This document is to assist others in understanding and troubleshooting Cloud Print. This took me many hours to get setup, troubleshoot, and prepare a document that is simple and easy to understand. These are literally step-by-step instructions on how you could be able to print from any Android device to any printer connected to a computer that has Google Chrome.  You would then be able to use the Cloud Print App without having to use HP ePrint to print to any printer connected to any computer (USB or wireless) basically allowing you to print virtually anything from your Android. 
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Without using iTunes, I want to browse to an Apple website that shows me the list of devices associated with my Apple Id

    My primary goal:  I want to browse to some Apple website where I have already logged in using my Apple Id and password, and I then want to click a link that will bring me to a page that will show me the Apple Devices that I "own", that are associated with either "me" (whatever that entity Id should be) or with my Apple Id.  Most importantly, I want to do this without using iTunes.  I have seen my list of devices before on an Apple web page, and it even shows the MAC addresses of the devices.  I did not reach this list by using iTunes.
    I know for an absolute fact that an Apple Customer Service rep on the phone showed me some trick for viewing all the devices that I had purchased. There was even a device that another person had purchased and then had sold to me, and this Apple rep showed him how to "disown" the device and she then walked me through how I could take over ownership of the same device).
    The procedure that she walked me through might not have anything to do with my Apple Id.  It might have had to do with some other unique way of identifying myself.   I simply cannot remember, and I cannot imagine what that Id would have been.  I have searched and searched via Google and every result returned by Google always talks about using iTunes to associate an Apple device with my Apple Id.
    My secondary goal:  If this is not the appropriate community to which I should have sent this question, all I can say is that it was the closest match that I could find.  If no one here can help me achieve my primary goal, can you please suggest another community to which I should post my question?
    Thanks!

    After hours and hours of failed searches, I must have used a different keyword in my Google search, and here is the website that I was looking for:
    https://supportprofile.apple.com
    And here is the guy whose website I found that helped me solve my problem:
    http://www.marcomc.com/2011/01/how-to-find-the-list-of-my-apple-registered-produ cts/
    I was going to rant here about how badly Apple designed their "Apple Id" stuff, how they strongly distinguish between using your Apple Id at the online Apple Store vs. using it at the App Store (which you have to get to via iTunes ... quite ridiculous) ... but I won't.  :-)
    Anyway, I hope that the two previously mentioned websites will be of help to others.

  • How do I print from an Android device using bluetooth?

    You had purchased the Officejet Mobile 100 printer to print from your Android device using bluetooth.
    You have the devices paired with bluetooth, but do not see an option to print or the print button does not work in this case.
    Well, here is how this can be accomplished in Android.
    For this example, I will use the steps to print a photo.
    1.  Pair the devices.
    2.  Open a photo you want to print.
    3.  Select the share option (may say send using depending on the version of Android).
    4.  Select Bluetooth.
    5.  Select the printer from the list of devices.
    6.  The file will be sent to the printer.  You can check the notification area at the top to see how the progress is going.  It may take a few minutes for the sending to finish.
    7.  It should then print the photo.
    HP Bluetooth printers natively support the printing of photos only, but a third party app can be used to print documents and other items.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
    This question was solved.
    View Solution.

    Hope this information is useful.
    I know there have been many instances of users that have not been able to print through bluetooth from an Android device.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP Laserjet Pro M1217nfw, support for ePrint Home&Biz on Android devices

    Got my new LaserJet Pro M1217nfw installed on my home (secure)wireless network and am printing wirelessly from 3 windows laptops.
    Started trying to get my smartphones to connect and print to it. Droid X Verizon, running gingerbread latest Verizon update. Download ePrint and ePrint Home & Biz to it. Upgraded my printer to latest firmware and SmartInstall, got an EPrint email address assigned to it. Am able to ePrint from phone just fine, but Home & Biz does not print, it detects printer and says has printed the file, doc, or pic but nothing comes out on the printer. I see from your lists of supportted printers that it is not
    supported on th 1217nfw. Is it planned to work on it in the future? Can you give my some hints or workarounds if it is possible to get Home and Biz to work?
    I tried the Wireless Direct feature on the printer, but really don't understand its purpose, since the printer and my phone are both
    connected to my local wireless network, why does the wireless direct use a different SSID and assigned a fixed IP address?
    anyway disabled that feature.
    Thanks for any help!
    This question was solved.
    View Solution.

    At this time ePrint Home&biz app is not supported on the HP Laserjet Pro M1217nfw. Other than ePrint using the printer emial address there isn't another solution with an Android device.
    I am an HP employee

  • Officejet 150 mobile printer with iPad/ iPhone and Android devices.

    Hi All,
    The Officejet 150 mobile printer won't work with IOS devices like iPhone or IPad over bluetooth connection.
    But can work with android devices. You can download the printshare app and print via bluetooth connection
    Happy printing
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

    Hi,
    I'm happy to announce that there is now an additional solution for mobile printing using the HP NFC/Wireless 1200w Mobile Print Accessory (HP Part Number: E5K46A) that will work on a number of HP Printing devices, please see the link: http://h20195.www2.hp.com/v2/GetPDF.aspx%2F4AA4-82​35ENW.pdf
    The only requirement is that you have the latest firmware revision installed on the device, this can also be powered directly from the devices USB port (in your case OfficeJet 150) via the USB cable.
    Regards
    Pedro
    Regards
    Pedro
    I do work for HP and my comments & advice are mine alone.

  • Unable to list firewire devices.thank you now for your future help.

    all right so my firewire decided it cant recognize my sony handycam...so i decided hey it is probably the firewire...so i buy a new firewire and it still doesnt work...so then i was like all right look it up online...i reset my smu nvram pram deleted the caches files turned off and unplugged the computer for 5 minutes ten minutes then a whole night...i get back to it and it doesnt work...so then i decided maybe my camera so i buy a new canon hd camera...i wanted a new camera anyways so what the heck you know? it doest recognize it...i have run techtool deluxe and disk utility repaired what i could repair...and nothing has worked...i then i take it to the mac store and have them look at it and he plugs in an external hard drive it works...my new canon works...and my sony does not work at the store...so then i am like all right it was a bad camera...get back home hook up the canon...it doesnt work...so if anyone has any ideas tell me please...i am in the middle of a project and this problem is really setting me back...i have some console messages and my mac info here... the guy at the mac store could have cared less that the bus was resetting and just thought i was crazy...would a hub solve this problem...i also tried plugging the comp in different outlets maybe it was being underpowered....so someone help me out the first console message i posted is from when i was in the apple store
    Jun 30 19:24:10 localhost kernel[0]: 4.170.46.7.3FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001f5bfffe0f33ee; max speed s800.
    Jun 30 19:32:53 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001f5bfffe0f33ee; max speed s800.
    Jun 30 21:54:40 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001f5bfffe0f33ee; max speed s800.
    Jun 30 22:02:26 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 238 bus resets in last 3 minute.
    Jun 30 22:05:02 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001f5bfffe0f33ee; max speed s800.
    Jun 30 22:09:07 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 263 bus resets in last 3 minute.
    Jun 30 22:12:25 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001f5bfffe0f33ee; max speed s800.
    Jun 30 22:17:08 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 290 bus resets in last 3 minute.
    Jun 30 22:20:24 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 260 bus resets in last 3 minute.
    Jun 30 22:23:40 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 269 bus resets in last 3 minute.
    Jun 30 22:26:56 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 296 bus resets in last 3 minute.
    Jun 30 22:30:13 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 287 bus resets in last 3 minute.
    Jun 30 22:33:30 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 300 bus resets in last 3 minute.
    Jun 30 22:36:46 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 304 bus resets in last 3 minute.
    Jun 30 22:40:03 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 300 bus resets in last 3 minute.
    Jun 30 22:43:59 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001f5bfffe0f33ee; max speed s800.
    Jun 30 22:46:45 localhost kernel[0]: 4.170.46.7.3FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001f5bfffe0f33ee; max speed s800.
    Jun 30 22:53:12 localhost kernel[0]: 4.170.46.7.3FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001f5bfffe0f33ee; max speed s800.
    Jun 30 22:57:42 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 279 bus resets in last 3 minute.
    Jun 30 23:00:55 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 116 bus resets in last 3 minute.
    Jun 30 23:04:12 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 275 bus resets in last 3 minute.
    Jun 30 23:07:26 josh-johnsons-imac kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in: 179 bus resets in last 3 minute.
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 1 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version: 1.21f4
    Serial Number: W-----------
    FireWire Bus:
    Warning: Unable to list FireWire devices.
    Maximum Speed: Up to 800 Mb/sec

    Hi -=Jawsh=-
    Greetings and welcome to the Apple boards
    Try the steps in this document: What to do if your computer won't recognize a FireWire or USB device
    Most likely you will require a reset of the bus as described in the last 5 steps on that page.
    Luck-
    -DP

  • Flash Builder 4.6 is not detecting my Android Device

    Hi Everybody,
    I'm making an application for the mobile platform but my Flash Builder 4.6 is unable to detect my Android Device. My Android device is manufactured by Huawei. I happened to visit the following site which displays the certified smart phones.
    http://www.adobe.com/flashplatform/certified_devices/smartphones.html
    In this list, I don't find my device. Is this the reason my device is not being detected by Flash Builder 4.6?
    Please let me know.
    Thank you very much.

    I see my device there available. Here is the command along the response:
    C:\Android\android-sdk\platform-tools>adb.exe devices
    adb server is out of date.  killing...
    * daemon started successfully *
    List of devices attached
    4C5499EFF384    device
    So, I can see my device in Android but not in Flash Builder 4.6
    Thanks

  • How do I delete items from my awesome page on an android device and how do I turn off the awesome page?

    I don't want other users on my android device to see my awesome page or my browsing history. if I cannot turn off the awesome page can I at least hide it?

    hello, you can delete your current private data and history in the ''settings menu > privacy''. if you open sensitive websites you can do so in a private tab - then they won't appear in your history or the top sites list.
    [[Mobile Private Browsing - Browse the web on your mobile device without saving or syncing information about the sites you visit]]

  • Firewire problem - (unable to list firewire device)

    I plugged my newly purchased WD external harddisk into the iMac fw 400 port and nothing shows. I've tried to connect it with MBP and everything is working fine.
    I checked the Console and it display the following message :
    01/09/2009 3:53:40 PM SystemUIServer[1648] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 3:54:18 PM System Profiler[1750] SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
    01/09/2009 4:24:56 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:31:22 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:36:30 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:38:26 PM System Profiler[109] SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
    01/09/2009 4:48:03 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:49:12 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:57:04 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:57:37 PM System Profiler[110] SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
    01/09/2009 5:13:23 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 5:18:14 PM System Profiler[110] SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
    01/09/2009 5:27:44 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    In the system profiler it said "unable to list firewire device"
    I've tried the following method:
    reset pram
    unplug the power cord and wait for 30 mins and reboot
    and they couldn't solve the problem.
    Could anyone solve this?
    Thanks

    First thing to do is reset the FW chip set on the mother board. Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes the ports to do stuff like detect when a device wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
    So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now plug the power cord back in, plug in ONLY the keyboard and mouse, start up the Mac. Now plug in accessories/hard-drives and see if your FW ports and the drive work any better.
    Best of luck!
    Patrick
    Reference articles:
    What to do if your computer won't recognize a FireWire or USB device
    http://support.apple.com/kb/HT1317?viewlocale=en_US
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US

Maybe you are looking for

  • My Ipod Touch 4th Generation wont connect to Itunes anymore

    I have an Ipod touch 4th generation and suddenly it wont connect to my itunes anymore. It will connect to the computer but the device isnt shown on itunes. I cant sync my ipod up with any music or apps or even transfer pictures from my ipod to my com

  • Using Ipod Nano 3rd generation with car kit

    Just a simple question... I recently got an 8GB Ipod Nano... want to play it in my car with the Belkin car kit. Even with the volume turned up at max on my ipod I still have to turn up my cd player volume in the car high - is this normal? Also, is FM

  • Multiple Selection Keywording/Labeling (Bug?)

    I recently noticed an inconsistency in behavior when selecting multiple images and applying a color label or keyword. If I am in grid view in the main window and use the lower row of images to make a sequential selection of, for example, 10 images by

  • Problem with DVI native - cable?

    I have a Intel Mini and am trying to get it to display on my Philips 20" HDTV. The TV has DVI native input (not HDMI). Here's the situation: - Output Mini to S-Video or Composite Video into the S-Video or Composite on the TV works as expected, but th

  • Unable to create a new zone

    Hi Guys, please help me out. I'm getting error "zoneadm: zone 'tech': 'brand-specific installation' terminated by signal SIGSEGV." when try to create a new zone. zoneadm -z tech install cannot create ZFS dataset rpool/tech: dataset already exists zon