[SOLVED] Disabling N mode: possible? (iwl4965)

Hey guys, I have an Intel 4965 802.11abgn wireless card.
I have been getting download speeds significantly lower than what I expect and what I get with Windows Vista on the same machine.
For example, with the easylist.com Arch mirror I usually get about around 1mbps on other computers. With this one, I get between 60-200kbps.
This happened in Vista as well, but I fixed the problem by disabling N mode in a device manager. I guess our router doesn't support it. So, my question is this: is there a way for me to disable N mode under Linux? It'd be great to get my regular download speeds back. Thanks!
Last edited by wirenik (2008-12-05 01:39:17)

lucke wrote:Try loading the module with "modprobe module_name that_option=1" (rmmod it first). If it works, add "options module_name that_option=1" to /etc/modprobe.conf to make it permament.
I did it!
$ modprobe -r iwlagn
$ modprobe iwlagn 11n_disable=1
Now I get up to nearly 2mbps from easynews, and download speeds everywhere else are soaring too. Thanks a million for the help, everyone!

Similar Messages

  • Disable aggressive mode

    We wanted to know if there is a way to disable “Aggressive mode” on the VPN concentrator.
    For example, on the ASA, we can do it using the command “isakmp am-disable”
    On a router we can do it using the command “crypto isakmp aggressive-mode disable”.
    Is there a similar command on the VPN concentrator ?
    Your help is appriciated.

    Fadi,
    Are you using Pre-Shared Keys or Certificates for Authentication. Please refer the below link for information on VPN Client AM and MM.
    http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_data_sheet090
    0aecd801a9de9.html
    Aggressive Mode is the default and the only mode available for Pre-shared key and Main Mode is only available for the Cert authentication.
    So, it is my understanding that it is not possible for VPN clients to use main mode to authenticate to the VPN3000 with pre-shared keys.
    Regards,
    Arul
    *Pls rate if it helps*

  • Is booting into update mode possible?

    Okay...here's the deal.  Installed "enhanced kernel (titan) for power users" from my install list in application manager, as part of trying to get the Mobile Hotspot app to work.  I was advised to do so by some very knowledgeable N900 users on this forum.  Well...long story short(er)...loading the kernel did not make mobile hotspot work, so I decided to uninstall and revert back to the factory kernel.  I did so using the "uninstall" app that came with the titan kernel....the screen went blank about half way through the process,...gave me a message that "kernel couldn't be removed".  Thereafter, upon rebooting the phone, the N900 just sits there and reboots, reboots, reboots now...never completing a reboot before rebooting again.  Sever has informed me that someone might be able to tell me how to reboot into update mode instead of Maemo for flashing....perhaps being able to just flash the kernel instead of the whole OS,...which I'll do if necessary.  Anyone want to take this one on?  Sure appreciate the assistance !  Thanks in advance.
    Solved!
    Go to Solution.

    Here's the line before I hit enter:
    flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin 
    flasher v2.5.2 (Nov 25 2009)
    Here's what came up after I hit enter
    SW version in image: RX-51_2009SE_10.2010.19-1_PR_MR0
    Image 'kernel', size 1705 kB
    Version 2.6.28-20101501+0m5
    Image 'rootfs', size 173568 kB
    Version RX-51_2009SE_10.2010.19-1_PR_MR0
    Image 'cmt-2nd', size 81408 bytes
    Version BB5_09.36
    Image 'cmt-algo', size 519808 bytes
    Version BB5_09.36
    Image 'cmt-mcusw', size 5826 kB
    Version rx51_ICPR82_10w08
    Image '2nd', size 14720 bytes
    Valid for RX-51: 2217, 2218, 2219, 2220, 2120
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2217, 2218, 2219, 2220, 2120
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2217, 2218, 2219, 2220, 2120
    Version 1.4.14.8+0m5
    Image '2nd', size 14720 bytes
    Valid for RX-51: 2101, 2102, 2103
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2101, 2102, 2103
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2101, 2102, 2103
    Version 1.4.14.8+0m5
    Image '2nd', size 14848 bytes
    Valid for RX-51: 2307, 2308, 2309, 2310
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2307, 2308, 2309, 2310
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2307, 2308, 2309, 2310
    Version 1.4.14.8+0m5
    Image '2nd', size 14848 bytes
    Valid for RX-51: 2407, 2408, 2409, 2410
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2407, 2408, 2409, 2410
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2407, 2408, 2409, 2410
    Version 1.4.14.8+0m5
    Image '2nd', size 14848 bytes
    Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
    Version 1.4.14.8+0m5
    Image '2nd', size 14848 bytes
    Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
    Version 1.4.14.8+0m5
    Image '2nd', size 14720 bytes
    Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
    Version 1.4.14.8+0m5
    Image '2nd', size 14848 bytes
    Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
    Version 1.4.14.8+0m5
    Image '2nd', size 14848 bytes
    Valid for RX-51: 2607, 2608, 2609, 2610
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2607, 2608, 2609, 2610
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2607, 2608, 2609, 2610
    Version 1.4.14.8+0m5
    Image '2nd', size 14848 bytes
    Valid for RX-51: 2507, 2508, 2509, 2510
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2507, 2508, 2509, 2510
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2507, 2508, 2509, 2510
    Version 1.4.14.8+0m5
    Image '2nd', size 14720 bytes
    Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
    Version 1.4.14.8+0m5
    Image '2nd', size 14848 bytes
    Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
    Version 1.4.14.8+0m5
    Image 'xloader', size 14848 bytes
    Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
    Version 1.4.14.8+0m5
    Image 'secondary', size 109440 bytes
    Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
    Version 1.4.14.8+0m5
    Nothing to do!
    Usage: flasher [OPTIONS]
    Options:
      -F, --fiasco=ARG            Location of a FIASCO image
      -k, --kernel=ARG            Location of kernel image
      -n, --initfs=ARG            Location of initfs image
      -r, --rootfs=ARG            Location of root JFFS2 image
          --cmt-2nd=ARG           Location of CMT FIASCO 2nd image
          --cmt-algo=ARG          Location of CMT FIASCO algorithm image
          --cmt-mcusw=ARG         Location of CMT FIASCO MCUSW image
          --cmt-no-verify         Disable verification of CMT programming
      -x, --xloader=ARG           Location of X-Loader image
      -s, --secondary=ARG         Location of NOLO secondary bootloader image
      -2, --2nd=ARG               Location of NOLO cold flasher ("2nd") image
      -u, --unpack[=ARG]          Unpack a FIASCO image
      -f, --flash                 Load and flash all supplied images
      -l, --load                  Only load all supplied images
      -b, --boot[=ARG]            Boot the kernel with optional cmdline
      -R, --reboot                Reboot the board (e.g. after flashing NOLO)
      -i, --read-device-id        Print out the device type
      -S, --serial-port=ARG       Serial port used for cold flashing or "usb"
      -I, --init-port             Only initialize the serial port
      -c, --cold-flash            "Cold flash" the device
      -h, --hw-revision=ARG       Specify product code and HW revision
          --enable-rd-mode        Enable R&D mode on the device
          --disable-rd-mode       Disable R&D mode on the device
          --set-rd-flags[=ARG]    Set R&D mode flags on the device
          --clear-rd-flags[=ARG]  Clear R&D mode flags on the device
          --query-rd-mode         Query the device R&D mode status and flags
          --set-hw-revision[=ARG] Set HW revision override on device
          --flash-only=ARG        Flash only certain components
      -U, --usb-device=ARG        Specify USB device to use (bus:device address)
    bash-3.2# 
    As you can see....nothing about waiting for a suitable device.

  • [SOLVED] Disable auto-comment in vim

    I have this line in my ~/.vimrc to stop vim from auto-commenting my lines:
    au FileType * setl fo-=cro " disable autocomment
    However, this doesn't work anymore. verbose shows
    formatoptions=croql
            Last set from /usr/share/vim/vim72/ftplugin/vim.vim
    My question is, which is the best way to solve this? (If possible, I would like to avoid ~/.vim/after/).
    Last edited by Mogger (2009-10-08 12:22:04)

    Suddenly it just works again. Huh? The second problem that appeared out of nowhere and was fixed somehow today. Weird.

  • Acrobat Reader X Disable Protection mode

    Hi All,
    i need some help with this freaky Acrobat Reader X version.
    We have currently  ~1000 computers with different old versions of AR (form 6 to 9)
    We need to upgrade to 10.0.1 version all PC's
    Will use SCCM for distributing the package.
    OK... everything here seems good but ... a lot of problems and erros appear.
    First we've installed on test group of 10 pc's the AR 10.0.0
    all users start complainig that they can't open the pdf's from our file servers.
    Solution - bring the patch 10.0.1
    After that all users start complaining that they can't print - Windows Error - Acrobat need to be closed !
    Solution - Protection mode disabled.
    My questions :
    1. How can I distribute both the Package of Acrobat and the update together with SCCM
    All my tries and reaings failed !!!
    i've try different methods and no success
    msiexec /i /q \\server\d$\Workstation Baseline\AcrobatReaderX\AcroRead.msi TRANSFORMS="AcroRead.mst" PATCH=\\server\d$\Workstation Baseline\AcrobatReaderX\adbeRdrUpd1001_Tier1.msp
    this do not work for me This is in SCCM program
    2. How can i disable through Adobe Wizard the Protection Mode ?
    I know how to do it manually but is not acceptable this way - i can't communicate with 1000 users to do this manually
    I know how to disable it from registry with GPO , but i can't disable it before installation, also i can't disable it on all PC's after installation, because it will take several days to complete for all pc's and this "hole" of some days will stop the work of our end-users.
    Any fresh ideia is wellcome. Also any help
    Thanks

    hey,
    had similar issues with protection mode.
    found we can do it 2 ways, 1. via registry entry, or 2. via an ADM.
    sorry cannot remember the referenced posts for the fixes below...
    we use the adm so that users cannot change it, and so that updates dont reset it.
    note that the adm has only a few settings, and i dont know the code for any other settings.
    1. - REG method:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\10.0\FeatureLockDown]
    "bProtectedMode"=dword:00000000
    REM: Above line Disables Protected Mode on startup
    2. - ADM Template method
    please note, just copy and paste into a text file and rename as .adm.
    remember that on the last section of the code below, change the "YOUR HEADER HERE" bit to what you want to use to find it in the GPO manager once you add the template.
    CLASS USER
    CATEGORY !!YOUR_COMPANY_NAME_GOES_HEREHeader
    CATEGORY "Adobe Reader 10"
    CATEGORY "Preferences"
    CATEGORY "General"
    CATEGORY "Application Startup"
    POLICY "Show splash screen"
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Originals"
    EXPLAIN !!ExplainNosplash
    VALUENAME "bDisplayedSplash"
    VALUEON NUMERIC 0
    VALUEOFF NUMERIC 1
    END POLICY
    POLICY "Enable Protected Mode at startup"
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Privileged"
    EXPLAIN !!ExplainProtectedMode
    VALUENAME "bProtectedMode"
    VALUEON NUMERIC 1
    VALUEOFF NUMERIC 0
    END POLICY
    END CATEGORY
    END CATEGORY
    CATEGORY "Identity"
    POLICY "Organization Name"
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Identity"
    EXPLAIN !!ExplainOrgName
    PART "Organization Name." EDITTEXT
    VALUENAME "tCorporation"
    END PART
    END POLICY
    END CATEGORY
    CATEGORY "Internet"
    CATEGORY "Internet Options"
    POLICY "Connection speed"
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\AVGeneral"
    EXPLAIN !!ExplainConnection
    PART "Connection speed." DROPDOWNLIST REQUIRED
    VALUENAME "iConnectionSpeed"
    ITEMLIST
    NAME "56kbps" VALUE NUMERIC 56000
    NAME "LAN" VALUE NUMERIC 10000000 DEFAULT
    END ITEMLIST
    END PART
    END POLICY
    END CATEGORY
    END CATEGORY
    CATEGORY "Spelling"
    CATEGORY "Dictionaries"
    POLICY "Dictionaries"
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
    EXPLAIN !!ExplainDictionary
    PART "Default Dictionary" DROPDOWNLIST
    VALUENAME "tDictionaryName"
    ITEMLIST
    NAME "English (United Kingdom)" VALUE "English (United Kingdom)"
    ACTIONLIST
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
    VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 7
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrder"
    VALUENAME "t0" VALUE "English (United Kingdom)"
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrderID"
    VALUENAME "i0" VALUE NUMERIC 7
    END ACTIONLIST
    NAME "English (United States)" VALUE "English (United States)"
    ACTIONLIST
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
    VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 2
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrder"
    VALUENAME "t0" VALUE "English (United States)"
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrderID"
    VALUENAME "i0" VALUE NUMERIC 2
    END ACTIONLIST
    END ITEMLIST
    END PART
    END POLICY
    END CATEGORY
    END CATEGORY
    CATEGORY "Units"
    POLICY "Page Units"
    KEYNAME "Software\Adobe\Acrobat Reader\10.0\Originals"
    EXPLAIN !!ExplainPageUnits
    PART "Page unit" DROPDOWNLIST REQUIRED
    VALUENAME "iPageUnits"
    ITEMLIST
    NAME "Points" VALUE NUMERIC 0
    NAME "Inches" VALUE NUMERIC 1
    NAME "Millimeters" VALUE NUMERIC 2 DEFAULT
    NAME "Centimeters" VALUE NUMERIC 3
    NAME "Picas" VALUE NUMERIC 4
    END ITEMLIST
    END PART
    END POLICY
    END CATEGORY
    END CATEGORY
    END CATEGORY
    CATEGORY "Adobe Acrobat 10"
    CATEGORY "Preferences"
    CATEGORY "General"
    CATEGORY "Application Startup"
    POLICY "Show splash screen"
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Originals"
    EXPLAIN !!ExplainNosplash
    VALUENAME "bDisplayedSplash"
    VALUEON NUMERIC 0
    VALUEOFF NUMERIC 1
    END POLICY
    END CATEGORY
    END CATEGORY
    CATEGORY "Identity"
    POLICY "Organization Name"
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Identity"
    EXPLAIN !!ExplainOrgName
    PART "Organization Name." EDITTEXT
    VALUENAME "tCorporation"
    END PART
    END POLICY
    END CATEGORY
    CATEGORY "Internet"
    CATEGORY "Internet Options"
    POLICY "Connection speed"
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\AVGeneral"
    EXPLAIN !!ExplainConnection
    PART "Connection speed." DROPDOWNLIST REQUIRED
    VALUENAME "iConnectionSpeed"
    ITEMLIST
    NAME "56kbps" VALUE NUMERIC 56000
    NAME "LAN" VALUE NUMERIC 10000000 DEFAULT
    END ITEMLIST
    END PART
    END POLICY
    END CATEGORY
    END CATEGORY
    CATEGORY "Spelling"
    CATEGORY "Dictionaries"
    POLICY "Dictionaries"
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
    EXPLAIN !!ExplainDictionary
    PART "Default Dictionary" DROPDOWNLIST
    VALUENAME "tDictionaryName"
    ITEMLIST
    NAME "English (United Kingdom)" VALUE "English (United Kingdom)"
    ACTIONLIST
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
    VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 7
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrder"
    VALUENAME "t0" VALUE "English (United Kingdom)"
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrderID"
    VALUENAME "i0" VALUE NUMERIC 7
    END ACTIONLIST
    NAME "English (United States)" VALUE "English (United States)"
    ACTIONLIST
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
    VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 2
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrder"
    VALUENAME "t0" VALUE "English (United States)"
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrderID"
    VALUENAME "i0" VALUE NUMERIC 2
    END ACTIONLIST
    END ITEMLIST
    END PART
    END POLICY
    END CATEGORY
    END CATEGORY
    CATEGORY "Units"
    POLICY "Page Units"
    KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Originals"
    EXPLAIN !!ExplainPageUnits
    PART "Page unit" DROPDOWNLIST REQUIRED
    VALUENAME "iPageUnits"
    ITEMLIST
    NAME "Points" VALUE NUMERIC 0
    NAME "Inches" VALUE NUMERIC 1
    NAME "Millimeters" VALUE NUMERIC 2 DEFAULT
    NAME "Centimeters" VALUE NUMERIC 3
    NAME "Picas" VALUE NUMERIC 4
    END ITEMLIST
    END PART
    END POLICY
    END CATEGORY
    END CATEGORY
    END CATEGORY
    END CATEGORY
    [strings]
    YOUR_COMPANY_NAME_GOES_HEREHeader=YOUR HEADER HERE
    ExplainNosplash="When disabled, the program will not display a splashscreen on startup.\n\nWhen enabled, the splashscreen will be displayed."
    ExplainProtectedMode="When disabled, the program will not run in Protected Mode.\n\nWhen enabled, Protected Mode will run, and may cause compatibility errors.\n\nSee http://kb2.adobe.com/cps/860/cpsid_86063.html for more details."
    ExplainOrgName="Enter the organization name by typing it in."
    ExplainConnection="To specify LAN, set the connection speed to 10000000."
    ExplainPageUnits="Set the page unit from the drop-down list.\n\nThe default is millimeters."
    ExplainDictionary="Used to specify the default dictionary to spell checking."

  • Disable Protected Mode Reader 11

    All,
    I have found articles on Adobe's website about disabling protected mode -
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown]
    "bProtectedMode"=dword:00000000
    [HKCU\Software\Adobe\Acrobat Reader\11\Priviledged]
    "bProtectedMode"=dword:00000000
    With both these settings turned on when you start up adobe and view edit > preferences it displays protected mode as being disabled however if I open task manager then open adobe reader I can see 1 instance of AcroRD32.exe - when I then open a PDF file via file > open browser to a PDF file I can see another 2 instances of AcroRD32.exe inside task manager. I thought this behavior was down to PM being enabled as it would spawn multiple instances of this to ensure it runs in sandboxing mode? The problem I have is we use an application inhouse which whitelist's only approved .dll's and .exe's and because Reader continues to spawn multiple instances of Reader even with these registry settings enabled I continue to hit issues getting Reader to work with my whitelist application.
    Is there a way that when you open Reader it will only ever open 1 instance of AcroRD32.exe or is the behavior I am seeing by design even with Protected Mode disabled?
    Thanks

    Solution : Open OSD file and modify the part "Policies"
    <POLICIES>
    <LOCAL_INTERACTION_ALLOWED>TRUE</LOCAL_INTERACTION_ALLOWED>
    <VIRTUAL_FILE_SYSTEM_PASS_THROUGH>TRUE</VIRTUAL_FILE_SYSTEM_PASS_THROUGH>
    <VIRTUAL_REGISTRY_PASS_THROUGH>TRUE</VIRTUAL_REGISTRY_PASS_THROUGH>
    <ENFORCE_ACLS_ON_VREG_MODIFY>TRUE</ENFORCE_ACLS_ON_VREG_MODIFY>
    </POLICIES>

  • Disable clamshell mode via Terminal

    Hi everyone.
    Is there any way to disable "clamshell mode" and avoid my MacBook Pro waking up seconds after I close the lid?. I always use my MBP17 with a magic mouse, usb hub, external monitor and plugged magsafe but using both screens at the same time. I just would like to close the lid and enter sleep mode while I go away from my mac for five minutes without having to unmount drives, unplug magsafe and turn off mouse. It's crazy!!. I still can't believe there is no preference for that.
    I know thats the wanted behaviour for using the external display with the macbook screen off but I just wanna send my mac to sleep for God sake!!
    Thanks in advance and excuse my poor english.

    Your English is much better than that of some native English speakers who post here.
    Your MBP's waking up immediately after being closed, without your doing something to cause it, is *not a feature of clamshell mode.* In clamshell mode, the expected behavior is that the machine will sleep when the display is closed, and you will then wake it and bring the external display into operation *by pressing a key on the external keyboard.* If you don't do that, it stays asleep. So clamshell mode doesn't need to be disabled to stop the behavior that's annoying you, because that behavior has nothing to do with clamshell mode.
    Instead, you need to determine which of the devices you are using with the MBP is interrupting sleep. This is nearly always caused by a USB device that doesn't understand sleep, and tries to communicate with the computer while it sleeps — which causes it to wake up. It may be your keyboard, your mouse, an external drive, a printer, scanner, ExpressCard device, Bluetooth cell phone, or even an SD card in the built-in card reader, if you have one. So first turn Bluetooth off and close the display to test for a change in behavior. If the MBP still wakes up a minute later, that wasn't the culprit. Disconnect your other peripheral devices one at a time, testing again after each disconnection, until you discover which device is responsible.

  • How can I disable Safe Mode permanently?

    I'm one of many people who use a Firefox addon called 'Leechblock' to help combat the tendency to waste time online by visiting time-wasting sites, or in my case - visiting porn sites. Leechblock helped, because it allowed me to ban the sites and search terms I would habitually go for. The only problem is that I'm now aware I can circumvent the whole ban thing by hitting 'Shift' when I click FIrefox and opening up the Safe Mode, this allows me to freely search for porn and\or disable the addon.
    I know that several other people use Leechblock for the same purpose, and we've all come up against this - if we could disable Safe mode on our own version of Firefox, it'd take considerably more effort to get back in and fall back to those bad habits.
    Others have posted instructions for disabling Safe Mode, but they've only worked with much older versions of Firefox. Is anyone with the experience able to dedicate a little bit of time to figuring out and explaining for the non-technical user how to do this on the latest version of Firefox?
    Your help would be much appreciated, not only by me but by others with the same issue. Thanks!

    See:
    *CCK2 Wizard: https://addons.mozilla.org/firefox/addon/cck2wizard/

  • HT5312 I have tired of these problem I want to solve in the quickest possible time and my English is weak and I more than a week of forgotten secret email based communication alternative answers please solved my problem.

    I have tired of these problem I want to solve in the quickest possible time and my English is weak and I more than a week of forgotten secret email based communication alternative answers please solved my problem.

    Apple ID security issues -
    Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

  • Safari won't let me disable safety mode for Youtube

    Hi community,
    I have tried a number of ways to do this and consistently failing. Youtube is locked into safety mode and I cannot disable it. My Google account is not in safety or filtering mode. Youtube works fine when I log in on Firefox. But when in Safari, and I scroll to the bottom of the Youtube page and click disable safety mode, the screen does not return to Youtube it goes nowhere, and when I get back on, safety mode is STILL ACTIVATED. This only happens when I'm using Safari. Can anyone help? I'm on a pretty old Safari I must admit - 5.1.10 - but I never used to have this issue until fairly recently. I don't know how it happened!?

    Tried removing cookies?
    Safari > Preferences > Privacy
    Press the "Details" button.
    Press "Remove All" button.

  • Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

    Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode
    Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

    You need to disable Safety Mode at the bottom of the YouTube page. More info here:
    https://support.google.com/youtube/answer/174084?hl=en

  • Disable Protected Mode the easy way

    I have created a script to disable protected mode in Adobe flash player after it is installed. I see a lot of this being done for various reasons. If anyone is interested in it, as it is a quick and easy way to do so, you dont have to go fooling with OS files.
    You can read about it below
    http://firefoxcrash.blogspot.com/2013/12/disable-protected-mode-in-adobe-flash.html
    Best Regards

    Protected Mode is win only fearture. http://blogs.adobe.com/asset/2010/07/introducing-adobe-reader-protected-mode.html

  • How do I disable Protected Mode at startup on Reader XI

    fallowing the instructions on:
    http://helpx.adobe.com/acrobat/kb/protected-mode-troubleshooting-reader.html
    I went  to "Edit > Preferences > General Tab".  The objective wasa to uncheck "Enable Protected Mode at startup".  The page was written for Reader X on Reader XI I couldn't find "Enable Protected Mode at startup" on the Gernal tab.  How do I disable Protected Mode at startup on Reader XI?

    Dragon NaturalySpeaking software doesn't work on FireFox in with Reader in Protected Mode.
    I see no hope for the future of our people if they are dependent on the frivolous youth of today, for certainly all youth are reckless beyond words. When I was a boy, we were taught to be discreet and respectful of elders, but the present youth are exceedingly disrespectful and impatient of restraint.
    - Hesiod, eighth century B.C.E..

  • Disable Protected Mode

    I have installed Reader 10.0.1 on my MacBook (OS X 10.6.3).
    I am trying to disable protected mode in order to view a particularly troublesome file/document. Where is the configuration panel that will allow me to toggle on/off "Enable Protected Mode at Startup"?
    I've seen it suggested that this panel is located under Edit > Preferences > General, but my version of Reader does not present this as an option (ie. there is no "Preferences" option under the Edit tab). There is a Preferences option under the main Adobe Reader tab, but I do not see the Protected Mode toggle button under this option...

    Protected Mode is win only fearture. http://blogs.adobe.com/asset/2010/07/introducing-adobe-reader-protected-mode.html

  • Disable read mode by default during installation

    I am currently trying to disable read mode by default as a part of the software installation.
    I have searched the msi file using the customization wizard but have not found any part of it that refers to this setting.
    Is there a reg key or a setting in the MSI I can change to disable this setting?
    Edit:
    This is for Reader X

    I have been able to figure out the answer, so I'll put it into here in case anyone else wants to do this.
    The following registry key has to be added to the msi or mst
    HKCU > Software > Adobe > Acrobat Reader > 10.0 > AVGeneral
    Dword - bBrowserDisplayInReadMode = 0

Maybe you are looking for

  • Msi kt 4ultra

    Hi, i had some problems regarding non stop freezing. My system worked stable for like 2 months then suddenly like 2 days ago it just kept freezing and freezing, only hard reboot helped. So i tested like everything:removed all hardware and started onl

  • How can i send and receive a 2us digital pulse from Labview

    i want to communicate with a system using 2us pulse like if i want to send 11010100 then i will send |----2US----|----2US----|............. I      I___I       I_____________I         I______________I         I_______________________ |----1-----|-----

  • Credit check urgent

    hello to every one, sub:- credit limit is working, but terms of payment is not working.   Requriment :- credit management, system is to be consider the terms of payment and credit limit for the customer if custome fails to pay the billing amount with

  • Applet : caught a SecurityException.  That's OK.

    I am trying to connect a Stateless Session Bean from an Applet. Do I need to add any permissions in the weblogic.policy files or to the JRE policy files used by the browser? Without providing any extra permissions anywhere, I am able to set the Initi

  • WBS Element Version Released Already Exists

    Dear All, When we create a Project by copying another Project, we get the error message " WBS Element Version Already Exists. Help. Regards, Shareeq