[solved] gcc version error during update

I'm trying to do a full system upgrade but whenever I start it I get the below error ":: gcc-gcj: requires gcc=4.5.1" although it appears I have gcc version 4.5.1 any ideas on what might be causing this?
oli / $ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
archlinuxfr is up to date
:: Starting full system upgrade...
:: Replace pycairo with extra/python2-cairo? [Y/n]
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: gcc-gcj: requires gcc=4.5.1
oli / $ gcc --version
gcc (GCC) 4.5.1
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Last edited by cani (2011-01-27 16:24:39)

Remember where you got gcc-gcj from?
That's your problem. Not GCC. Check your error again, and read where it says
:: gcc-gcj: requires gcc=4.5.1
There's little point in checking the gcc version prior to the upgrade. You're querying the installed gcc, and that will always be the version gcc-gcj needs. The whole upgrade, in fact, chokes because the new gcc will not be 4.5.1 anymore.
Please use code tags for output of commands run in a terminal.

Similar Messages

[SOLVED] Error during update of LUKS header on device ./file

dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)

Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16)

Customer Coversion Using Interface Table - Error during update

I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MK

Convert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm

Communication channel: error during update

Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!

hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards

ME 808: System error: error during update Table EKAB

Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
Shiva

Hi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards

Communication channels error during update

Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina

Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta

Error during update download

I can't open my itunes
there was an error during update download

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

[solved]gcc broken after pacman update - libcloog-isl.2.so

Hi,
After a pacman update my gcc broke. When compiling it gives this error:
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/cc1: error while loading shared libraries: libcloog-isl.so.2: cannot open shared object file: No such file or directory
gcc -v output:
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.6-20111223/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --enable-multilib --disable-libssp --disable-libstdcxx-pch --enable-checking=release --with-fpmath=sse
Thread model: posix
gcc version 4.6.2 20111223 (prerelease) (GCC)
and ls /usr/lib/*cloog* output:
/usr/lib/libcloog-isl.a /usr/lib/libcloog-isl.so /usr/lib/libcloog-isl.so.3 /usr/lib/libcloog-isl.so.3.0.0
uname -a:
Linux willem-arch 3.2.4-1-ARCH #1 SMP PREEMPT Sat Feb 4 10:53:01 CET 2012 x86_64 Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz GenuineIntel GNU/Linux
How can I fix this? I already tried installen cloog with pacman but that doesn't help.
edit:
I solved the problem. There was an issue with my pacman.conf. Multilib wasn't properly enabled after the pacman4 transition.
Last edited by pientertje (2012-02-08 09:47:25)

I'm using multilib.
@Allan
more fully than pacman -Syu? Or is my mirror not up to date?
edit:
I solved the problem. There was an issue with my pacman.conf. Multilib wasn't properly enabled after the pacman4 transition.
Last edited by pientertje (2012-02-08 09:46:40)

How to determine different errors during update database with JDBC 2.0

During updating my database (MS Access 2000) using JDBC 2.0, I entered a value for the primary key field which has existed
in the database. However, when executing the method "udpateRow()" it gives me an error message "Error in row" and the
database was not updated.
When I update an Integer field with a non-integer value (e.g: Characters ), it also gives me the same error message. When I
update a Date field with a non-date value, it still displays the same error message.
How can I determine for each of the cases from the SQLException thrown that the actual error has occurred since I want to
display a different customized message indicating the different errors that occurred during updating??
Currently, part of my code is as follows:
          int currentRow = rs.getRow();
          String values[] = new String[ rsmd.getColumnCount() ];
          // Initialize values[] begins here:
          for( int count = 1; count <= rsmd.getColumnCount(); count++ ) {
               rs.updateObject( count, values[ count - 1 ] );
          try{
               rs.updateRow();
          catch( SQLException e ) {
               System.out.println( e.getMessage() );
               rs.cancelRowUpdates();
               rs.absolute( currentRow );
Can someone please help me solve this problem?? THANKS.. :)

Rather than attempting to figure out which column value causes the update to fail, I would try validating the input data before you attempt to use it in a SQL update. Of course, this would only be useful if you know what data types the inputs are supposed to be in advance of running the update.
William

HT4623 what is 3004 error during updating iphone

i have downloaded the ios 7 but during updating it is giving error of 3004. plz guide me

https://discussions.apple.com/thread/4034118

Error during updates

Hi I have a problem during updates:
after restar
and so own...
enyone can help me I need to updated Itunes and my printer

About 70% of planet Earth is trying to download the same thing at the same time.
Don’t forget that it is not ONLY Ipad update, .....but also Iphone update too today
Give it some time.
Right now Apples servers are being slammed

U44M1P7 Error during update.

When trying to install a current update in PS CC I got the following error msg: "Update Failed" error (U44M1P7)

Googling "U44M1P7" points to http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Error during update illustrator to 16.2.0 version

During the update of Illustrator to 16.2.0 version I get this error: U44M1P7 what I have to do to resolve it?

I found the solution, thanks to Mylenium...
The error codes are all listed on the support pages somewhere. The bad news is, that if the updates fail, you'll probably have to reinstall everything after running the Creative Suite Cleaner Tool. These errors usualyl occur, because soem other Adobe product has blocked or damaged the installer database. Also clean out any download caches for the downloader and simply try again. Maybe that can save you from a reinstall...

HT1338 Error during Updating iDVD 7.1.2 on MacBook with OS X version 10.6.8

Hi,
I couldn't proceed with the updating because the first thing in updating is the error dialog without much info ("Alert: iDVD 7.0.4 or later is required to install this update"), if clicking Close button, then the updating process ends.
Any suggestion is appreciated.
Thanks,
Schen88

I have the same issue and I actually HAVE 7.0.4 installed from the original iLife that came with my mac.
I have a macbookpro 13 late 2009 and iLife '09 updated regularly.
I have now updated to Mountain Lion and everything seems ok.
'Check for Updates' from the iDVD menu sends me to App Store but nothing shows up in the 'updates' section.
Would appreciate help!
Thanks!
Adam

[solved] gcc version error during update

Similar Messages

Maybe you are looking for