[solved] haskell-shake gives me error in pacman

Hi,
When I run
pacman -S haskell-shake
, then I receive:
[xan@argonia ~]$ sudo pacman -S haskell-shake
warning: haskell-shake-0.14.3-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Package (1) Old Version New Version Net Change
haskell-core/haskell-shake 0.14.3-1 0.14.3-1 0.00 MiB
Total Installed Size: 24.89 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [######################] 100%
(1/1) checking package integrity [######################] 100%
(1/1) loading package files [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) checking available disk space [######################] 100%
(1/1) reinstalling haskell-shake [######################] 100%
Reading package info from stdin ... done.
/tmp/alpm_0IbjT6/.INSTALL: line 17: /usr/share/doc/ghc/html/libraries/arch-gen-contents-index: No such file or directory
error: command failed to execute correctly
[xan@argonia ~]$
Thanks in advance,
Last edited by xanb (2015-02-15 19:38:15)

I know this other thread isn't the same error as yours but it does provide some insight. There are some packages on your unofficial repo that must be used instead of the packages from official arch repos. Can you double check that you are indeed using all packages required from the unofficial?

Similar Messages

Hi im new apple user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like .! What can be this issue n how to solve it??

hi im new apple ,ac book pro user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like though i can access web site n etc .! What can be this issue n how to solve it??

Hi,
If the machine is brand new I don't see why the serial Number is missing (it is entered on to a special chip at the factory)
However if the machine is a return and has been refurbished then the Logic/mother board may have been changed and someone forgot to put the info back to the new board.
for the Points
7:44 pm Thursday; January 16, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

[Solved] Haskell/Xmonad Upgrade Issues

It seems that the testing version of haskell-x11-xft requires the non-testing version of haskell-x11.
Further, installing xmonad-contrib from testing seems to want to install the non-testing version of xmonad and haskell-x11-xft.
It seems to be one very large circle which I can't resolve.
So a pacman -Syu gives me:
warning: cannot resolve "haskell-x11=1.6.0.2-2", a dependency of "haskell-x11-xft"
warning: cannot resolve "haskell-x11=1.6.0.2-2", a dependency of "xmonad"
:: The following packages cannot be upgraded due to unresolvable dependencies:
haskell-x11-xft xmonad
Do you want to skip the above packages for this upgrade? [y/N] u
error: failed to prepare transaction (could not satisfy dependencies)
:: haskell-x11-xft: requires haskell-x11=1.6.0.2-2
:: xmonad: requires haskell-x11=1.6.0.2-2
Not sure if I've done something wrong or I'm being stupid.
Last edited by Nabobalis (2013-03-14 10:22:56)

You can upgrade haskell-x11-xft and xmonad with;
# pacman -Syud --ignore haskell-x11
I too encountered what seemed to be a dependency loop, so used -d --nodeps option to skip the version check. Checking the Package repo shows that haskell-x11 is also flagged out of date, until things have been updated in the repo's you will see an error during update unless you
--ignore haskell-x11

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

I have a an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes. All of the other movies on the card download with out a problem.

I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
Can anyone please help me.

The mystery remains....
Thanks for the pointers. The file type is .mts (a proprietry sony one).
I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
Thanks

GRPO with Freight gives an error ...

Hello Experts,
When I post a GRPO without Freight it gives no error, but when I try to add with Freight Amount it gives an ERROR.
Inventory Account is not defined [Goods Receipt PO - Rows - Warehouse Code] Message 173-77.
Freight Setup: for that perticulat Freight that I am using... is Revenue and Expense Accounts are defined... Distribution and Drawing Methods are Quantity and Stock Check Box is CHECKED.
Help Required...
Thanks & Regards

Hello Nazir,
If your the items are set up with 'GL accounts managed by warehouse' (this is defined under the Inventory Tab of the Item Master Data), you should check that all the accounts for the warehouse have been set up under Administration => Set Up => Inventory => Warehouses => Accounting Tab.
In particulary you should check that you have defined an Expense Account for the specific warehouse in the GRPO document.
Also since you have chosen to affect the stock with additional expenses you need to specify an offsetting G/L account to the Stock account for clearing journal entries created by A/P Invoices and Goods Receipt POs.
I hope it solves your issue.
Kind Regards,
Magalie Grolleau
SAP Business One Forums Team

Final Cut Pro 7 crashed and will not open (only gives unusual error)

Final Cut Pro 7 (from Final Cut Studio 2 installation) crashed sometime yesterday at 8 and any time it was opened it oulde give an error saying that this version of Final Cut wasn't supported by G4 and needed to be upgraded to G5. This is far from true though since it's been working properly and without trouble for about 2 months.
Also, and I'm not sure if it's related or not, but installer.app stopped working after this happened. Of course, I want to know what could have caused this to happen. Could it have been from switching any settings or working with certain HD footage?
It's a MacBook with Snow Leapord if that helps.

yeah, you have to be careful with your terminology, otherwise you start a firestorm.
Given the ONLY information we get in solving issues is what people write, accurate terminology is critical to solving the problem. If people need someone to read their mind, then they should to take their problem into a repair facility where the tech people can directly deal with the machine.
Have fun.
x

HT204400 no matter what i try, my apple tv says it cant connect to the network and it gives me error -3906. i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi. I have tried to restart and restore both the apple tv and my modem. still the same issue and same error message. any ideas?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have hp pavilion dv6-3113st i try to make recovery from my disks but give me error 0xe0f00013

i have hp pavilion dv6-3113st i try to make recovery from my disks but give me error 0xe0f00013

Hi
As per the error it shows that the Recovery partition on the unit is corrupted. Please contact HP Technical support and order for the set off Recovery Disc.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

This line give me error Map fillParams = new HashMap(); for calling ireport

hi master
sir i flow this link step by step
http://developers.sun.com/jscreator/learning/tutorials/2/reports.html
when i us this step
Double-click the View Report button to display the Java source for the viewReportBtn_action method.
Add the following code shown in bold to the body of the viewReportBtn_action method.
Code Sample 5: viewReportBtn_action Method
public String viewReportBtn_action() {
// Free up the rowset resources
tripDataProvider.close();
then this line give me error
Map fillParams = new HashMap();
in out put windows give me this error
C:\Documents and Settings\Administrator\My Documents\Creator\Projects\TravelReport\src\travelreport\Page1.java:383: cannot find symbol
symbol : class Map
location: class travelreport.Page1
Map fillParams = new HashMap();
please give me error how solve this error
thank's
aamir

Complete step 17 (2 steps after you paste the code)
17. Right-click in the source and choose Fix Imports from the pop-up menu.
I suggest that you complete the following 2 tutorials before you try to do the advanced ones.
http://developers.sun.com/jscreator/learning/tutorials/2/jscintro.html
http://developers.sun.com/jscreator/learning/tutorials/2/helloweb.html

I am trying to make a Shell call to Firefox in the C:\Program Files (x86)\Mozilla FireFox\ directory and LabView shell call gives an error.

I am trying to make a Shell call to Firefox in the C:\Program Files (x86)\Mozilla FireFox\ directory and LabView shell call gives an errors. I can go to the DOS shell and make the call fine, but Labview Shell gives several errors. Anyone know how to get around the directory issue with Program Files (x86) directory name having the space in it and the (x86) that DOS does not seem to like?
Solved!
Go to Solution.

You need to use quotes.

I upgraded my Iphone 4 wirelessly to iOS 5.1 and I'm stuck in recovery mode and my phone won't restore and gives me error (1) What do I do?

I upgraded my iphone4 wirelessly to iOS 5.1 and now I'm stuck in recovery mode and when I try and restore my phone it gives me error code (1) At this point,
I want a working phone. Any ideas?

download a program called RecBoot, very easy to use, connect your iphone and click on "exit recovery mode" and it will restart normally. I had the same problem as you, but I solved it with this program.

USING STRUTS2 DOJO PLUGIN TAGS GIVES COMPILER ERROR (JDev 10.1.3.3)

Hi.
Using Struts 2.1.2 dojo plugin tags gives compiler error:
Error(9): Couldn't instantiate tag sx:head (class: null). Be sure that the tag class is available...
(translated from spanish)
So I can't run the application.
When configured, tags can be chosen from the component palette and the normal struts tags (not the dojo ones) do compile and run ok.
From service request:
Examining Jdeveloper's console message, its apparent that the tag library is not compatible with JDeveloper because of
the following warning:
oracle.jsp.logger.JspMessages.warningInvalidTldVersion:J2EE JSP-0033
Someone has any workaroun or solution?
### Steps to Reproduce ###
1.- Create new application and project
2.- Copy Struts 2.1.2 jar libs including dojo somewhere (for example in WEB-INF/lib)
3.- Associate the jars to the project (Libraries option in Project Properties)
4.- Create a JSP
5.- Use a dojo tag in the JSP
<%@ taglib uri="/struts-dojo-tags" prefix="sx"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<title>index</title>
<sx:head/>
</head>
<body></body>
</html>
6.- Compile

Hi did you solved this problem? I have same

My PC sporadically recognizes my iPhone. occasionally it synchs on first try. More often it recognizes the iPhone and then gives an error message that it can't recognize it. Help!

My PC sporadically recognizes my iPhone. occasionally it synchs on first try. More often it recognizes the iPhone and then gives an error message that it can't recognize it. Help!

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

My apple RIP gives this error message" the application ppRIPe has unexpectedly quit"

MY APPLE RIP GIVES THIS ERROR MESSAGE" the application ppRIPe has unexpectedly quit"

Thanks.
I should have mentioned that I have already done the Resolving Permissions as outline on Apple Support pages, but, I went ahead and did the complete sequence as shown on Dr. Smokes.
I decided to stop beating a dead horse and did an Erase and Install of 10.2 again since I did not have anything on there yet. So far, everything is working perfectly. I am doing the Software Updates called for one by one to see if any of those caused the problem.
The only thing I did other than doing all of the updates after the install was to install OS 9.2 for my Classic Environment software and I also installed an HP PSC 1315v All-In-One scanner/printer. I cannot imagine that would have done anything.
I did have some strange issues with Where in the USA is Carmen Sandiego and The Star Fleet Technical manual so I may stay away from them unless I start in OS 9 if none of the other updates cause any issues.
Thanks. BTW, How should I rate your answer? I know that it did not solve my problem, but, it is likely that something else I did whacked something.
I'll update when I know more.

[solved] haskell-shake gives me error in pacman

Similar Messages

Maybe you are looking for