[SOLVED] Hauppauge PVR-500 - Cannot request encoder memory region.

Hello all
I need some help getting this card to work on my two year old mythbox that's been tunerless since day one.
I installed the card, ivtv-utils and did pacman -Syu
but, I have no video devices in /dev
This is whats happening during startup.
[family@htpc ~]$ dmesg | egrep -i '(ivtv|tveeprom|tuner)'
[ 5.732675] ivtv: Start initialization, version 1.4.3
[ 5.732726] ivtv0: Initializing card 0
[ 5.732728] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 5.732846] ivtv0: Cannot request encoder memory region.
[ 5.738901] ivtv0: Error -5 on initialization
[ 5.745007] ivtv: probe of 0000:04:08.0 failed with error -5
[ 5.745031] ivtv1: Initializing card 1
[ 5.745033] ivtv1: Autodetected Hauppauge card (cx23416 based)
[ 5.745142] ivtv1: Cannot request encoder memory region.
[ 5.751061] ivtv1: Error -5 on initialization
[ 5.756869] ivtv: probe of 0000:04:09.0 failed with error -5
[ 5.757015] ivtv: End initialization
[ 666.818438] fuse snd_hda_codec_hdmi ivtv cx2341x nvidia(PO) tveeprom v4l2_common videodev snd_hda_intel snd_hda_codec snd_hwdep hid_generic snd_pcm media usbhid hid snd_page_alloc snd_timer i2c_algo_bit snd shpchp psmouse kvm sp5100_tco pci_hotplug i2c_piix4 r8169 soundcore mii serio_raw pcspkr evdev button i2c_core k10temp wmi ir_lirc_codec lirc_dev microcode ir_mce_kbd_decoder ir_sanyo_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_rc6_mce mceusb rc_core cpufreq_powersave powernow_k8 mperf processor ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic pata_acpi usb_storage ohci_hcd pata_atiixp ahci libahci ehci_hcd libata scsi_mod usbcore usb_common
Shows up in lspci
[family@htpc ~]$ lspci |grep video
04:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) Video Decoder (rev 01)
04:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) Video Decoder (rev 01)
and the firmware already seems to be there.
[family@htpc ~]$ ls /lib/firmware/ |grep v4l
v4l-cx231xx-avcore-01.fw
v4l-cx23418-apu.fw
v4l-cx23418-cpu.fw
v4l-cx23418-dig.fw
v4l-cx2341x-dec.fw
v4l-cx2341x-enc.fw
v4l-cx2341x-init.mpg
v4l-cx23885-avcore-01.fw
v4l-cx23885-enc.fw
v4l-cx25840.fw
v4l-pvrusb2-24xxx-01.fw
v4l-pvrusb2-29xxx-01.fw
[family@htpc ~]$ uname -a
Linux htpc 3.6.10-1-ARCH #1 SMP PREEMPT Tue Dec 11 10:19:36 CET 2012 i686 GNU/Linux
Some hardware information:
CPU AMD Athlon II X3 435
MB GIGABYTE GA-MA78LM-S2
GPU SPARKLE GeForce GT 220 1GB
2 GB of RAM
I just got this tuner card used off eBay so I don't know if something is wrong with the card itself or not. It seems to be in pretty good shape, it came with all the original packaging. If all else fails I can drag out an old system and install Windows Xp on it to test it.
Any help with this problem would be appreciated. Thanks.
Last edited by Vortalex (2012-12-31 01:11:12)

Your problem looked interesting, so I thought I'd dig down underneath the covers. But this is a single person's opinion as a driver developer, but not a Linux driver developer... A massive difference... So take it with a healthy dose of skepticism.
But the bottom line is my opinion is that you might want to head on over to the LinuxTV.org folks and see what they have to say.
The tldr; version follows:
I drilled down on this error message: "ivtv0: Cannot request encoder memory region."
That comes from the drivers/media/pci/ivtv/ivtv-driver.c file... and here's the snippet of code from the latest "linux-stable" code tree in the "ivtv_setup_pci" function:
if (!request_mem_region(itv->base_addr, IVTV_ENCODER_SIZE, "ivtv encoder
IVTV_ERR("Cannot request encoder memory region.\n");
return -EIO;
It appears that call is attempting to map the PCI IO memory for your PCI adapter... and it fails with that -EIO (-5) error code.
There can be multiple reasons for the failure, but the LinuxTV folks may be able to determine the reason for your particular instance.

Similar Messages

[Solved] Hauppauge PVR-250 + Lirc = Kernel Oops & Pain

Using:
- Hauppauge PVR-250
--- ivtv
--- lirc_dev
--- lirc_i2c
Modprobe ivtv? Fine.
Modprobe the lirc modules? Fine.
Start lircd service? Fine.
Try to use lirc? FAIL.
This will be my own little self dialog as I get reintroduced to all the pain I use to experience trying to setup MythTV.
lirc_dev: IR Remote Control driver registered, major 61
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
BUG: unable to handle kernel paging request at 52492071
IP: [<c01832e6>] do_sys_open+0x76/0xf0
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: cx8800 cx88xx bttv ir_common compat_ioctl32 videobuf_dma_sg videobuf_core btcx_risc lirc_i2c lirc_dev ipv6 usb_storage msp3400 saa7115 tuner tea5767 tda8290 tda18271 tda827x tuner_xc2028 xc5000 tda9887 firewire_ohci tuner_simple mt20xx tea5761 firewire_core crc_itu_t psmouse ivtv pcspkr serio_raw emu10k1_gp i2c_algo_bit cx2341x v4l2_common tveeprom ppp_generic ohci1394 gameport ieee1394 nvidia(P) i2c_i801 intel_agp i2c_core agpgart ehci_hcd shpchp pci_hotplug uhci_hcd sg thermal evdev processor fan button battery ac snd_usb_audio snd_usb_lib snd_intel8x0 snd_emu10k1 snd_rawmidi snd_ac97_codec snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus slhc skge gspca usbcore videodev v4l1_compat rtc_cmos rtc_core rtc_lib reiserfs sr_mod cdrom sd_mod ata_piix ata_generic pata_acpi libata scsi_mod dock
Pid: 3412, comm: lircd Tainted: P (2.6.25-ARCH #1)
EIP: 0060:[<c01832e6>] EFLAGS: 00010287 CPU: 0
EIP is at do_sys_open+0x76/0xf0
EAX: 52492065 EBX: 40000020 ECX: 00000043 EDX: f5d83260
ESI: ffffff9c EDI: f5072000 EBP: 00000007 ESP: f5d99f84
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process lircd (pid: 3412, ti=f5d98000 task=f543c000 task.ti=f5d98000)
Stack: bfe01a98 00000000 f5d83260 bfe01a98 00000002 bfe0392f f5d98000 c01833dc
bfe01a98 bfe0392f 00000000 00000002 c01050d8 bfe0392f 00000002 bfe01a98
00000000 00000002 bfe01af8 00000005 0000007b 0000007b c0100000 00000005
Call Trace:
[<c01833dc>] sys_open+0x2c/0x40
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
=======================
Code: 78 78 8b 44 24 20 89 d9 89 fa 89 04 24 89 f0 e8 31 ff ff ff 3d 00 f0 ff ff 89 44 24 08 77 6e 8b 54 24 08 bb 20 00 00 40 8b 42 0c <8b> 70 0c 0f b7 56 72 81 e2 00 f0 00 00 81 fa 00 40 00 00 ba 20
EIP: [<c01832e6>] do_sys_open+0x76/0xf0 SS:ESP 0068:f5d99f84
---[ end trace fbdc5cf39936cc8f ]---
Last edited by georgia_tech_swagger (2008-07-29 17:45:56)

This is indeed a problem in the lirc 0.8.2 package in extra. I have submitted a bug with a fixed PKGBUILD of lirc 0.8.3.
http://bugs.archlinux.org/task/11041

[SOLVED] mythtv - No picture using Hauppauge pvr-150

Hi All,
I have just set up mythtv but cannot get a live picture using the Hauppauge pvr 150. The card is working (thanks to enrique) and can both stream video and record video either live or in a cron job. I am attaching the cable directly to the card instead of using a digital cable box. This limits the available channels but thats OK since this connection probably won't be used that often.
I don't recall seeing any options specifying whether the cable connection is analog or digital, nor do I recall seeing any options pertaining to the video card. I don't know what I'm doing wrong so any and all tips will be appreciated.
Thanks
Larry
Last edited by ljshap (2008-05-27 11:02:32)

Problem Solved:
The dodo (Me), kept putting the card in as "analog v4l device" which is how myth set it up.
It should be MPEG-2 encoder card (PVR-x50,500).
I just wasn't being careful enough to check all possibilities.
Seems to be working.
Maybe that will help someone.
Larry

RSSDK300 Number 17559.000 cannot be encoded as a BCD

Hello experts,
I'm getting an error while creating a Datasource to an External BI System.
The error is : RSSDK300 Number 17559.000 cannot be encoded as a BCD of len gth 7 with 3 decimal places at field VALOROBJECTIVO
Today I've done many DataSources and this is the only error I get.
Cana anyone helpme to solve this problem?
Best regards,
Rui

Hello Rui,
I am getting the same error. I want to create a DataSource to extract from an Informix database (using UD Connect).
Did you solve your problem?
Regards,
Monique Kosler
Edited by: Monique Kosler on Jul 11, 2011 3:28 PM

SAP DBTech JDBC: [4]: cannot allocate enough memory: Out of memory

Hello,
I am currently experiencing this error when making request to the Hana database via jdbc : SAP DBTech JDBC: [4]: cannot allocate enough memory: Out of memory
I guess I am running out of space, so I wanted to delete some data from unused tables. The problem is that I cannot connect with Studio anymore "Error when connecting to system".
Is there another way to delete data from some tables when getting this particular error ?
Does anyone experienced such a situation ?
Thank you,
Benoît

Hi Benoit,
Please plan to migrate to the latest version from Rev 38 before 1 year license expires in Rev 38 in Oct 2013. You need to export your content and import in the latest version.
As you are aware, a lot of bugs are fixed between Rev 38 and the newer releases along with new SPS5 features and HANA One is adding new web based management features in each HANA One release which does not need SSH to stop|start HANA as it can be done in browser starting in Rev 52 (check out The specified item was not found.for additional info). Please stay tuned for the upcoming version which will have additional management features to manage your instance.
Thanks,
Swapan

Grub error 28: selected item cannot fit into memory

I installed arch, systemrescuecd, and trinity rescue kit on a usb stick. I used the mbr arch installed, grub 0.97, and edited the menu.lst to boot all os'es on the usb.
SystemRescueCD provides an os with all kinds of "rescue" tools, but also other tools like GAG(gag.sourceforge.net/index.html), Memtest86, FreeDos etc, which can be booted from the bootloader.
But, when I try to boot GAG, Memtest86, or FreeDos, grub gives me an error saying "error 28: selected item cannot fit into memory". According to grub, my lower memory is 630K, and my upper memory is about 3.4GiB. The GAG "kernel", is 24.7 kb, and the GAG initrd is 267.8 kb.
This is not really arch related, I know, but still, if you can help me, I'd be very thankful. Google doesn't seem to help me on this one.

Hello again,
i tried with Solaris 10 5/08 on VMware ESX 3.5 and VMware Server 2, both failed. I tried several ISO images, mounted as ISO or DVD, altered BIOS parameters in VMware ESX, but nothing works for me.
VMs where created with 1024mb RAM and 8GB disk space, more than recommended.VMware seems to be more successful with installing Solaris10:
http://pubs.vmware.com/guestnotes/wwhelp/wwhimpl/common/html/wwhelp.htm?context=guestnotes&file=choose_install_guest_os.html#3888649
It seems to be a problem of GRUB in Solaris 10 5/08, but i don't know how to solve it. Every idea might be a great help for me.

Error 28: selected item cannot fit into memory

Dear Forum,
I am trying to install Solaris 10 x86 OS into my SFX4200 server through Remote Control feature. I had setup the bios to 1st boot from CDROM and 2nd boot from Disk.
So, i inserted Solaris 10 x86 media into my laptop. Then i connected my laptop directly to the ILOM using cross cable. From the ILOM web page i had launch the Remote Control. I powered on the SFX4200 and i can see the boot up process through the Remote Control window. The boot up process has successfully read my laptop Solaris 10 x86 media.
At the end of the boot up process i saw three(3) option for me to choose:
1. Solaris
2. Solaris ttya
3. Solaris ttya( SFV60x and SFV65x )
I had selected, option #1 and #2 but few seconds later, i saw this error message "Error 28: selected item cannot fit into memory"
This is my laptop configuration:
- Microsoft Windows XP Pro
- 512 MB of RAM
- 40GB disk and 7GB available space.
Has anyone encountered the same problem.
Please, can someone help and guide me to solve my problem.
Thanks in advance.

Hspaans,
First of all, thanks for the reply.
I believe my machine has sufficient amount of memory. The following are the spec of my SFX4200 server:
1x Dual Core AMD Opteron Processor 280( 2.4GHz )
4x 2GB of Memory
Fyi, i had also tried to start the installation using optin # 2 " Solaris ttya " but still failed.
I will be much appreciate if you can help me or guide me to install Solaris 10 x86 OS through SFX4200 Remote Control window( Install OS using my laptop DVD Drive ).
Please let me know, if you require more information.

Hauppauge PVR-150 Capture, Audio Static/Noise IVTV Composite input

Hello,
This is my first post.
I have been migrating from Gentoo to Arch after 7-8 years using gentoo, I think Arch is great. even though precompiled packages have there downside. anyway.
I have problem with static/noise audio when capturing from Composite using IVTV, im running kernel 3.0.4 arch kernel.
I have 10 Hauppauge PVR-150 (+1 PVR-500) Cards running, the problem occurs in a random card after reboot.
Video is fine on all cards, but sometimes the audio on either one of the 11 cards get static/noise in the audio background.. sometimes allot, other times just a little bit noise/static.
I tried the wiki, and searched the forum, but can't find a solution, can anyone help me??
I can provide sample (cat /dev/videoX > sample.mpeg) if interested.
See dmesg: http://pastebin.com/U2JnJ0Zr
Thank you

Hello,
changing to constant bitrate seems to correct the problem,
v4l2-ctl -d /dev/videoX --set-ctrl=video-bitrate-mode=1
and then remember to not have the capture source audio volume to more than 75%.

Cannot create Shared Memory

Hi,
For maintenance activity we have restarted the system. When I checked in
ST06 for os collecotor is not running and "warning: cannot create shared memory". Then I have performed the following commands at OS level
saposcol u2013d
Collector > clean
Collector > quit
saposcol -k to stop the collector.
Before restarting
saposcol -d
Collector > leave (You should get a message Shared memory deleted)
Collector > quit
move the coll.put file
saposcol u2013f(Start the saposcol)
When I executed the last command. I got message saying that "Cannot create Shared Memory"
Environment:
Windows 2003 cluser environment.
4.6c
oracle 10g
Thanks and Regards
Satya

Hi Sergo,
No, but I restarted the SAP, DB and SAPOSCOL. SAPOSCOL is up and running but there is waring mmessage in log file as
02:27:11 19.04.2010   LOG: ====================================================================================
02:27:11 19.04.2010   LOG: =                           OS Collector Start
02:27:11 19.04.2010   LOG: ====================================================================================
02:27:11 19.04.2010   LOG: Starting C:\WINDOWS\SapCluster\SAPOSCOL.EXE
02:27:11 19.04.2010   LOG: Saposcol Version is [COLL 20.79 03/08/22 46D - 20.46 NT 04/08/01]
02:27:11 19.04.2010   LOG: Allocate Counter Buffer [10000 Bytes]
02:27:11 19.04.2010   LOG: Allocate Instance Buffer [10000 Bytes]
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: INFO: saposcol's shared memory size is 86420.
02:27:11 19.04.2010   LOG: Connected to existing shared memory !
02:27:11 19.04.2010   LOG: MaxRecords = 637 <> RecordCnt + Dta_offset = 751 + 61
02:27:16 19.04.2010 WARNING: WaitFree: could not set new shared memory status after 5 sec
02:27:16 19.04.2010 WARNING: Cannot create Shared Memory
When I trying to stop the SAPOSCOL service. I got the message saying that
" Could not stop the SAPOSCOL service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion."
and it stopped the SAPOSCOL.
Then I am able to start SAPOSCOL.
The strange thing is in my environment, there are OS 10 drives but now I can see only 3 drives c, p and q.
Regards
Satya

JCO_ERROR_CONVERSION -- Number 33,4 cannot be encoded

Hi
We are getting the following problem at the RFC adapter level when an XML gets converted into RFC Structure at SAP.
The number can be accomidate into targer structure still then it is giving problem.
com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Number 33,4 cannot be encoded as a BCD of length 5 with 2 decimal places at field XXX
Kindly please try to help.
Thanks
Ramesh

Hi,
This error is occuring from Adapter level. Mapping program is successfully exceuting without any transformation error. And we have imported 3 or 4 times to SAP-XI from SAP R/3 system. Is there any refresh at Adapter level ? Does it require refresh for our problem ?
If we are sending a data of 33.4(dot instead of comma) and 3,4 (reduced one digit), We are able to invoke the RFC and get the response.
But if we are sending an data of 33,4, it is throwing the same error.
Please find the error message:
com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Number 55,5 cannot be encoded as a BCD of length 5 with 2 decimal places at field ZZGO_PZ1
Please provide the precious inputs in resolving this issue.
Thanks,
Ramesh

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". This never happened b4. I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi ,
Thank you for your question.
This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
Default Web Site:
Exchange Back End:
Then IIS must be restarted.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Out of memory - Cannot alocate 2gb memory to SGA - SUsE 9 / 10gR2

I need help, please !!!!
Cannot alocate > 2gb memory to SGA
SHMMAX:
SUsE:/home/oracle # /sbin/sysctl -p
kernel.shmall = 2097152
kernel.shmmax = 3221225472
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 1048576
net.core.rmem_max = 1048576
net.core.wmem_default = 262144
net.core.wmem_max = 262144
vm.disable_cap_mlock = 1
SUsE:/home/oracle #
When startup database:
ORA-27102: out of memory
Linux Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 4620291
Dell powered 2800 - 6gb memory
SUsE 9
Oracle 10g Std.

You're most likely correct - I have been running without issue with the existing kernel params and SGA set to 1536M - but at this point, I just want to get back to my original settings to start the first node, then do additional research on the kernel params and SGA settings. So, any help in setting the SGA back to what I had previously would be most appreciated.
Here are my kernel params:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 1024 65500
net.core.rmem_default = 1048576
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max =1048536

Solaris 10 11/06 - grub Error 28: Selected item cannot fit into memory

I don't get install Solaris 10 11/06 in my IBM Thinkpad 600X laptop with 584 MB RAM memory.
When I try I get allways this message:
Error 28: Selected item cannot fit into memory.
I have seen similars topics in this forum but nobody has found a right solution.
Any idea to help me?
Thanks.

I was testing my memory with memtest86 for three hours and I didn't find any problem.
I think my memory is working fine.
Thanks for your reply anyway

Change requests encoding

Hello!!
I wonder if there is a way of changing server requests encoding. I use the proxy jar of the deployed services in OC4J (jdeveloper 10.1.2.) to access them, and I have noticed that the request are encoded usingUTF-8, however I would like to use ISO-8859-1 instead. Is it possible?
Could you be so kind as to help me, please?
Thank you very much in advance.

Hi,
Sorry, I didn't program myself the same senario, however you can check unicode demo programs TECHED_UNICODE_SOLUTION*, and presentation 'How to Make Your ABAP Code Unicode-Enabled' from Dr. Christian Hansen.
You can also use the following classes:
CL_ABAP_CONV_OUT_CE system code page > any code page
CL_ABAP_CONV_X2X_CE any code page > any code page
CL_ABAP_CONV_IN_CE any code page > system code page
Hope it helps.
best regards,
Peter

Cannot create virtual memory swap file

Hello,
I'm getting an error message when i execute the query of a workbook.
The message I receive is "Cannot create virtual memory swapfile "\EuZ""
Something to note is that my workbook opened and ran fine in the morning and started crashing in the afternoon.
I started the workbook on another user's machine
and works fine... for now.
I look in the .INI that are created when i open discoverer and found nothing.
If there is a setting to change or
someone knows about that problem, let me know.
NOTE: The version i'm running is dicoverer 9.0.2.39.01
under windows 2000 (SP3)
Thank you
Yan

This is a (sometimes) bug, at least in Discoverer 3.1 and I see it on some machines when I first install Discoverer. One or two queries may work, and then your message (with garbage characters for the "file name") from then on.
The program seems to fail to correctly set the cache sizes in the registry (or ini file or whatever it's saving stuff) from the Preferences.
What fixes it for us (every time) is:
1. Pull down the [Tools] menu.
2. Select [Options].
3. (Scroll right if needed to) select the [Cache] tab.
4. Set the [Memory Cache] and [Disk Cache] values. You can set them to the values they were going to default to anyway, just type in there and then put it back to the original value so it sees they were "modified" and saves the values when you...
5. click [OK]
Apparently the installation defaults are not reliably saved in the first place. "Changing" them in the [Options] dialog will, however, reliably set them and that always cures this problem for our users.
Regards,
Chuck Somerville
Scitex Digital Printing

[SOLVED] Hauppauge PVR-500 - Cannot request encoder memory region.

Similar Messages

Maybe you are looking for