[SOLVED] I can't get my second monitor to work. :'(
whatever i try it doesent work, my xorg.conf is configured for it, but it wont start. the graphics carg is a nvidia 8800 GTS
any ideas?
-xhhux
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder58) Wed Oct 1 15:13:37 PDT 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "freetype"
EndSection
Section "ServerFlags"
# Removed Option "Xinerama" "0"
Option "Xinerama" "1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG L246WP"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Apple CinemaDisplay"
HorizSync 30.0 - 75.0
VertRefresh 60.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:3:0:0"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:4:0:0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS 512"
BusID "PCI:3:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS 512"
BusID "PCI:3:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "SLI" "Auto"
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "SLI" "Auto"
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by xhhux (2008-11-07 07:06:47)
Ruckus wrote:
What is the error your getting?
cat /var/log/Xorg.0.log
Also, have you tried the Nvidia X Server settings program to generate your Xorg.conf?
it just wont sart at all. and yes i have tried nvidia's x server settings.
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH x86_64
Current Operating System: Linux shit 2.6.27-ARCH #1 SMP PREEMPT Sun Oct 26 10:08:01 UTC 2008 x86_64
Build Date: 17 August 2008 10:36:51PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 7 10:11:31 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Device1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "1"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7c06c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,03a1 card 10de,c55e rev a2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,03ac card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,03aa card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,03a9 card 10de,c55e rev a1 class 05,00,00 hdr 00
(II) PCI: 00:00:4: chip 10de,03ab card 10de,c55e rev a1 class 05,00,00 hdr 00
(II) PCI: 00:00:5: chip 10de,03a8 card 10de,c55e rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:6: chip 10de,03b5 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:00:7: chip 10de,03b4 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,03ad card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:1: chip 10de,03ae card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:2: chip 10de,03af card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:3: chip 10de,03b0 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:4: chip 10de,03b1 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:5: chip 10de,03b2 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:6: chip 10de,03b3 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:02:0: chip 10de,03b6 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:02:1: chip 10de,03bc card 10de,c55e rev a1 class 05,00,00 hdr 00
(II) PCI: 00:02:2: chip 10de,03ba card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:03:0: chip 10de,03b7 card 0000,0000 rev a1 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0369 card 10de,c55e rev a2 class 05,00,00 hdr 00
(II) PCI: 00:0a:0: chip 10de,0360 card 10de,c55e rev a3 class 06,01,00 hdr 80
(II) PCI: 00:0a:1: chip 10de,0368 card 10de,c55e rev a3 class 0c,05,00 hdr 80
(II) PCI: 00:0b:0: chip 10de,036c card 10de,c55e rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:0b:1: chip 10de,036d card 10de,c55e rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:0d:0: chip 10de,036e card f0de,c55e rev a1 class 01,01,8a hdr 00
(II) PCI: 00:0e:0: chip 10de,037f card 10de,c55e rev a3 class 01,01,85 hdr 80
(II) PCI: 00:0e:1: chip 10de,037f card 10de,c55e rev a3 class 01,01,85 hdr 80
(II) PCI: 00:0e:2: chip 10de,037f card 10de,c55e rev a3 class 01,01,85 hdr 80
(II) PCI: 00:0f:0: chip 10de,0370 card 0000,0000 rev a2 class 06,04,01 hdr 81
(II) PCI: 00:0f:1: chip 10de,0371 card 0175,10de rev a2 class 04,03,00 hdr 80
(II) PCI: 00:11:0: chip 10de,0373 card 10de,c55e rev a3 class 06,80,00 hdr 00
(II) PCI: 00:12:0: chip 10de,0373 card 10de,c55e rev a3 class 06,80,00 hdr 00
(II) PCI: 00:13:0: chip 10de,0376 card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 01:00:0: chip 10de,05b1 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 02:00:0: chip 10de,05b1 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 02:02:0: chip 10de,05b1 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 03:00:0: chip 10de,0600 card 1682,2332 rev a2 class 03,00,00 hdr 00
(II) PCI: 04:00:0: chip 10de,0600 card 1682,2332 rev a2 class 03,00,00 hdr 00
(II) PCI: 05:07:0: chip 104c,8023 card 10de,c55e rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:3:0), (0,1,4), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
[4] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[5] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[6] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[7] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc6000000 - 0xcdffffff (0x8000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xa0000000 - 0xbfffffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:10:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:15:0), (0,5,5), BCTRL: 0x0a04 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xcfe00000 - 0xcfefffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:19:0), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (1:0:0), (1,2,4), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
[4] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[5] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[6] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[7] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xc6000000 - 0xcdffffff (0x8000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xa0000000 - 0xbfffffff (0x20000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (2:0:0), (2,3,3), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 3 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xca000000 - 0xcdffffff (0x4000000) MX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (2:2:0), (2,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xc6000000 - 0xc9ffffff (0x4000000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b]
(--) PCI:*(3:0:0) nVidia Corporation unknown chipset (0x0600) rev 162, Mem @ 0xcc000000/24, 0xb0000000/28, 0xca000000/25, I/O @ 0x9c00/7
(--) PCI: (4:0:0) nVidia Corporation unknown chipset (0x0600) rev 162, Mem @ 0xc8000000/24, 0xa0000000/28, 0xc6000000/25, I/O @ 0x8c00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[1] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[2] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[3] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[4] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[5] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[6] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[7] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[8] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[9] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[10] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[11] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[12] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[13] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[14] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[15] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[16] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[17] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[18] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[19] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[20] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[21] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[22] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[23] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[26] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[27] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[28] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[29] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[30] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[31] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[32] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[33] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[34] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[35] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[36] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[37] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[38] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[39] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[40] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[41] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[42] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[43] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[1] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[2] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[3] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[4] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[5] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[6] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[7] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[8] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[9] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[10] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[11] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[12] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[13] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[14] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[15] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[16] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[17] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[18] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[19] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[20] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[21] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[22] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[23] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[26] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[27] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[28] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[29] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[30] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[31] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[32] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[33] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[34] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[35] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[36] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[37] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[38] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[39] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[40] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[41] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[42] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[43] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[5] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[6] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[7] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[9] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[10] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[11] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[12] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[13] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[14] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[15] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[16] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[17] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[18] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[19] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[20] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[21] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[22] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[23] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[26] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[27] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[28] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[29] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[32] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[33] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[34] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[35] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[36] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[37] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[38] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[39] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[40] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[41] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[42] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[43] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[44] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[45] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[46] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[47] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[48] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[49] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 177.80 Wed Oct 1 15:09:29 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 177.80 Wed Oct 1 14:50:00 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03:00:0
(WW) NVIDIA: No matching Device section for instance (BusID PCI:4:0:0) found
(--) Chipset NVIDIA GPU found
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[5] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[6] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[7] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[9] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[10] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[11] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[12] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[13] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[14] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[15] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[16] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[17] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[18] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[19] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[20] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[21] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[22] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[23] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[26] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[27] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[28] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[29] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[32] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[33] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[34] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[35] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[36] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[37] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[38] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[39] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[40] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[41] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[42] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[43] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[44] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[45] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[46] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[47] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[48] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[49] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[5] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[6] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[7] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[9] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[10] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[11] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[12] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[13] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[14] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[15] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[16] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[17] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[18] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[19] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[20] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[21] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[22] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[23] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[29] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[30] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[31] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[32] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[33] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[34] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[35] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[36] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[37] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[38] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[39] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[40] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[41] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[42] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[43] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[44] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[45] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[46] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[47] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[48] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[49] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[50] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[51] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[52] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
[53] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[54] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "SLI" "Auto"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA SLI enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS 512 (G92) at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.92.16.00.39
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS 512 at
(--) NVIDIA(0): PCI:3:0:0:
(--) NVIDIA(0): LG L246WP (DFP-0)
(--) NVIDIA(0): LG L246WP (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LG L246WP (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS 512 (G92) at PCI:4:0:0 (GPU-1)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.92.16.00.39
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS 512 at
(--) NVIDIA(0): PCI:3:0:0:
(--) NVIDIA(0): LG L246WP (DFP-0)
(--) NVIDIA(0): LG L246WP (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LG L246WP (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "720x576".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1280x720" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1280x720".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "720x576".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1280x720" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1280x720".
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "DFP-0:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[5] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[6] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[7] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[9] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[10] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[11] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[12] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[13] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[14] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[15] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[16] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[17] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[18] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[19] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[20] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[21] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[22] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[23] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[26] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[27] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[28] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[29] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[32] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[33] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[34] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[35] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[36] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[37] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[38] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[39] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[40] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[41] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[42] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[43] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[44] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[45] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[46] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[47] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[48] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[49] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Similar Messages
-
I cannot get my second monitor to work!
Hi,
I have a brand new MacBook Pro, and I am trying to hook up a 17 inch ADC studio monitor to it. I have the DVI-ADC adapter and I have everything hooked up properly. The USB ports work on the monitor (I have my wireless mouse plugged into it and it works properly) and the extended desktop is turned on because there are definitely window that I dragged over there. When I hit the power button it flashes white and then flashes off again.
Is the screen defective? Did I do something wrong?
Thanks!Thank you so much for getting back to me. By not connecting I mean, it will not show a picture. When I right click and change the display settings, I have gone through every possible reolution setting on none of them produce a picture other than an occasiional flickering screen on the very lowest resolution setting.
The monitor model is HF 199H and it is still relatively new and in great condition.
I bought the Rocketfish connector (RF-AP307) as I was told by the Apple Techs at Best Buy that I needed the cable in order to hook up a second monitor. There's also an HDMI output from the monitor but I do not have the cable to connect to my computer.
Is there a chance that somehow bootcamp will not allow for me to extend my screen? -
[SOLVED] httrack - Can't get its GUI webhttrack to work
I installed httrack v.3.41.3-1 from extra but can't get webhttrack, the GUI frontend, to work. Running webhttrack as root gives me the following error message: "/usr/bin/webhttrack(17566): could not find httrack directory". There seem to be a whole lot of files missing in the httrack package in extra that are present in the original source package httrack-3.41-3.tar.gz from http://www.httrack.com.
How can I get httrack to run in its GUI?
Last edited by RobF (2007-07-21 01:07:40)Remove the 'rm -r $startdir/pkg/usr/share' line from it's PKGBUILD, build it, and it should work fine then.
cheers, -
How can I get an external monitor to work in OS 10.9.3
I installed OS 10.9.3. External Retina monitor still works fine. All other external monitors have ceased working. They were working poorly under 10.9.2, now dead. Advice other than giving up and fixing Apple issues by switching to Windows?
I was just assuming since it was 'universal' it would work. D'oh.
The "Universal" accouts for the differences in the architecture between PowerPC and Intel, but not for differences between 32 bit and 64 bit applications. And since MacOS 10.7 the operating system changed dramatically. The process system supports applications to use a sandbox for safe communication. Older code, not ready for sandboxing, cannot communicate with the new GarageBand.
GarageBand for Mac (v10.0): Unexpected behavior with Audio Units plug-ins -
TS3477 I can not get my second display to work
HI i have a mid 2010 mac book bro 13", I had it connected to VGA display and now it doesnt display anything or identify the second screen. This happened over night. please help
Maybe the VGA's power supply failed. I've gone through many VGA's where that happens (bad luck?).
Does your vga have a power switch that lights up? Can you feel any heat above the vga monitor? If yes to all of this, check your connections.
Note, these things are not cost effective to repair. Just get a replacement or a flat panel monitor. -
[SOLVED] Help, can't get my X-Fi to work :(
Hi all. I recently decided to try out Arch. I'm currently running Gentoo on my boxes, but I set up arch on a new drive and I'm giving it a go. However, the time I have saved by not having to compile anything or troubleshoot emerge issues has now been completely taken up by trying to get my sound working. Works fine in Gentoo, so I have made sure to compare kernel configurations and they both seem the same in relevant areas. ALSA is enabled, and OSS is disabled The XFI driver is built-in, and no other drivers are enabled:
[root@server2k linux]# grep -i snd .config
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=y
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
[root@server2k linux]#
I've been all over the net and I have seen people mention similar problems with the ctxfi driver. But no solutions that have worked for me. The physical card is seen:
[root@server2k linux]# lspci | grep -i creative
00:0e.0 Multimedia audio controller: Creative Labs SB X-Fi
however alsa doesn't see it:
[root@server2k linux]# cat /proc/asound/cards
--- no soundcards ---
I tend to not use modules for stuff I know I need (e.g. sound card drivers...) , but the module is there..in the kernel. I was trying with a separate module before, and I made that lsmod told me it was loaded. However nothing seems to make a difference. I'm pretty sure alsa is configured correctly because I was seeing my onboard sound before I disabled it. I also took out all of the alsa-related stuff I had put in rc.conf and modules.conf because nothing seemed to make a difference. it was all related to getting the ctxfi crd to show up as card0 to override the onboard, but since it's not even being detected that seems sort of pointless right now.
If anyone has any ideas of what to try next I would really appreciate it. These are the versions I am running:
kernel 2.6.34.1
alsa-lib-1.0.23-1
alsa-utils-1.0.23-2
Oh, the otehr weird part is if I look in the dmesg output, the driver claims that "Something's wrong!!!" Yeah...really useful. In the source for the driver there are like 16 places where that error message is printed, and I'm not about to go hacking some module code. I did put some print statements in there to see where it was failing, and it looks like it's failing at this call:
err = atc_create_hw_devs(atc);
Don't know if that helps, is anyone familiar with the actual driver?
Last edited by Fox2k (2010-07-11 23:58:57)Thanks, all. No luck, I ended up scouring the gentoo forums some more and found somebody who ran in to the exact same problem last year which I am having now. Here's the solution. It worked for me. Not ideal, but all else failed:
Today I tried again to get my soundcard working, this time with:
linux kernel 2.6.31 and the alsa ctxfi driver in it
linux kernel 2.6.31 and alsa-driver-9999 from portage
both led to the same results as before (see my postings above)
So I finally hacked the official creative xfi-driver to compile against 2.6.31. And now sound is working again for me...
If anyone else runs into the same trouble as I did, here are the changes i made:
Code:
$ diff XFiDrv_Linux_Public_US_1.00 XFiDrv_Linux_Public_US_1.00-new
diff XFiDrv_Linux_Public_US_1.00/ctatc.h XFiDrv_Linux_Public_US_1.00-new/ctatc.h
25d24
< #include <sound/driver.h>
diff XFiDrv_Linux_Public_US_1.00/cthw20k1.c XFiDrv_Linux_Public_US_1.00-new/cthw20k1.c
23a24
> #include <linux/delay.h>
diff XFiDrv_Linux_Public_US_1.00/cthw20k2.c XFiDrv_Linux_Public_US_1.00-new/cthw20k2.c
23a24
> #include <linux/delay.h>
diff XFiDrv_Linux_Public_US_1.00/xfi.c XFiDrv_Linux_Public_US_1.00-new/xfi.c
14d13
< #include <sound/driver.h>
55,59c54,57
< card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
< if (card == NULL) {
< return -ENOMEM;
< }
<
> err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
> if (err < 0)
> return err;
>
(reference: http://forums.gentoo.org/viewtopic-p-63 … l#6348361)
Last edited by Fox2k (2010-07-11 22:32:40) -
Can I add a second monitor to a TouchSmart 520-1070?
Can I add a second monitor to a TouchSmart 520-1070? Can it be done through a USB port with a USB to DVI converter?
To connect your HP TouchSmart 520-1070 desktop computer to a second monitor or a TV, you will need to purchase a USB-to-video adapter. I recommend the eVGA UV Plus+ 19 USB-to-Video Adapter, however many of these other USB-to-video adapters should also work.
FYI... with a touch screen, you can only "clone" the desktop... trying to "extend" the desktop may cause problems using the computer.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Can I add a second monitor to Touchsmart 520-1170a?
Can I add a second monitor to a Touchsmart 520-1170a?
Hi,
Please try one othe the following adapters:
http://www.amazon.com/StarTech-com-Multi-Monitor-External-Adapter/dp/B002FJQXXC
http://www.startech.com/usb-video-adapters
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
When I open a new tab, how can I get the second tab to be me my home page also?
I know how to right click and open a new tab when I am browsing but if I want to open just a blank new tab, how can I get the second tab to be my home page also?
I know how to right click and open a new tab when I am browsing but if I want to open just a blank new tab, how can I get the second tab to be my home page also?
-
The hard drive on my laptop that contained Elements just died. Can I get a second copy for installation on my new PC?
The iPhone is not a backup device.
Restore the iTunes library from the backup that should be kept of your media and other important files.
Syncing the iPhone to a new library (in this case, it will be a new library unless you have a complete backup of the iTunes folder pre-crash) will result in the media on the device being removed and replaced with content from the new library.
As for iOS5, we really do not know until Apple officially releases it. -
Can I add a second monitor to my MacBook Air notebook and use both monitors simultaneously?
Can I add a second monitor to my MacBook Air notebook and use both monitors simultaneously? For example, have a spreadsheet open on the notebook monitor while the second monitor is displaying an architectural drawing?
MiniDisplay-to-? adapters ... ? replaced by VGA or DVI or HDMI
Best to use only 1 adapter to match the intended cable since mutliple-adapter setup (buy a VGA, then add VGA-DVI adapter) tendsto lose signal strength.
Also graphics chips run hotter driving external display, and since the graphics chip in Air is part of the CPU the CPU may throttle itself as the integrated graphics chip heats up.
Two modes of operation:
Mirror ... same image both displays
Extended ... the other screen is "extra screen space" -
Getting external VGA monitor to work without cloning. [Solved]
Hey guys. I'm on a ThinkPad T42 with an older ATI card (ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]). I'm using the open source drivers since I'm fairly sure the closed source drivers don't support this card.
Anyway, I can get an external monitor to work as a clone booting into X, but I can't get it to work as a separate screen. I've tried multiple xrandr commands, but it appears my card just won't do it.
This is my xrandr output when nothing's connected. Based on this, is it just not possible to do what I want?
# xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1024 x 1024
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*+ 60.0
800x600 60.3
640x480 59.9
S-video disconnected (normal left inverted right x axis y axis)
I know it worked out of the box when this thing had Windows on it, so I know the hardware can do it. I'm wondering if it's just a driver restriction or if I just don't understand what I'm doing with randr.
Thanks
-mS
Last edited by aglarond (2009-02-10 03:24:01)damjan wrote:BTW, what's the limit on your card and what driver are you using?
It's giving me a 1600x1200 limit, no matter how far up I jack the virtual command in xorg. That's better than the 1024x1024 I was getting before the change, though.
Also, I'm using the GPL'd radeon kernel module (I assume it comes bundled with the kernel since I don't remember loading it) and the radeon driver from xf86-video-ati. I see that package also has an ati_drv.so, but I haven't used it.
I was pretty sure the Catalyst drivers don't support this card (ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500])
-mS -
Can I attach a second monitor to a TouchSmart 320-1030?
Can I attach a second monitor to a TouchSmart 320-1030? It has only USB i/o ports. How do I do it? Will the software support it if I can find the right hardware? Can I use an older VHS monitor with some sort of a USB/VHS conversion gadget?
These units do not have any video out capability, you will need a USB to VGA/HDMI/DVI adapter from a 3rd party, there's no such thing as a "VHS monitor" did you mean VGA? if so then the statement above applies, as it does for all the other 9 million threads on this same subject :-)
-
I can't get my second e-mail to verify
Question - I can't get my second e-mail to verify.
Check the sync settings for the email; see if it is set to sync at all, or what the interval is set at. I set mine to every 15 minutes for 30 minutes .... Go to settings > Accounts > Email > Choose the email account and it should have Sync settings where you can set up the schedule.
You also should be able to open the email account, and sync within it manually, regardless of the sync settings. -
How can I get the second group and report totals in Matrix report?
Hi,
I have created a matrix report with 2 break Groups.
Iam getting columns totals for the first group, but not for the second group and the report totals.
How can I get the second group and report totals for each month?
Thanks.
Ram.Hi Ram,
If you want a total at any group-level, go to the particular group in the data model, insert a summary column in the group, and select
Reset At > appropriate Group Name
For report level summaries, you must create the summary column outside of all groups.
Navneet.
Maybe you are looking for
-
Cannot connect my C7280 wirelessly to my Netgear WNDR3400V3
Greetings, Trying to connect my wireless Netgear WNDR3400V3 routher to my HP C7280. I enter the SSID and password, using WPA and get error: can not conect to network. What am I missing. Thanks, AJ
-
The user is using Windows 7 Professional, and IE 9.0. The problem started 2 days ago. I saw a similar issue mentioned in this forum, the suggestion to remove S/MIME is not an option because it is not installed on her machine. I have tried multiple c
-
Need table name to link with mseg or ekko ekpo
hi ppl, As i need to display mat charasteristics value,class,material id,vendor..etc.. i got mat char values,class,material id..but furthur i need to link with mseg table..so is there any table which links between mseg to ausp,kssk,ksml,
-
Flash player skips socket policy on 843
So, this is a copy of another post I made, but I get a sneaking suspicion I put the post in the wrong forum: http://forums.adobe.com/thread/497758?tstart=0 The summary: The Socket class in flash player sometimes, for some users (across all sorts of O
-
Lossless Audio Only Export In Premiere Pro
Hello, I have finished a long project in Premiere Pro and the original idea was to use the "Edit" > "Edit in Adobe Audition" > "Sequence" to export all my 14 tracks to make tweaks, fixes and the final mix in Audition CS6. Turns out the "Edit in Adobe