[Solved] Integrating new Partitions into the Filesystem

Hello,
I reinstalled arch a couple days ago. I'm not using GPT with
/var, /boot, / , and /home partitions.
However, during the installion, i didnt add /var, /boot, and /home to my fstab [ i assumed genfstab would do this]
Thus, i've only been using one of my partions, my root partition.
So, now that i've discovered this, i would like to use them [20gb is not enough for me lol]
However, i've already installed lots of programs and the /var, /boot/ and /home directories on my root partition are full of stuff.
So how do i integrate these partitions into my filesystem? I need to copy all the files from the /var, /boot, and /home directories onto the
/var, /boot, and /home partitions.
I could just mount each onto a dummy directory, copy the files onto their respective partition, umount, then remount onto the correct directories.
Is that the safest sequence of steps to take? If not what is?
Thank you
Last edited by fawkes5 (2013-04-24 08:13:47)

lol. Didn't see the arch wiki post on this exact issue. The steps i outlined are those suggested by the wiki.
Add new partitions to an existing system
Should this be marked for deletion?
Last edited by fawkes5 (2013-04-24 01:39:43)

Similar Messages

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details.

To add new record into the table Data Service client

When I am trying to add new record into the table Employeedetails using Data Service client it is giving a sql exception: "java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1."
Code:
DataService ds=DataServiceFactory.newDataService(getInitialContext(),"EmplDetApp","ld:EmplDetAppDataServices/EmployeeDetails");
EmployeeDetailsDocument edoc=EmployeeDetailsDocument.Factory.newInstance();
edoc.addNewEmployeeDetails();
//here I set the primary key value empid
edet.setEmpid("1212");
edet.setEmpname("manu");
ds.submit(edoc);
Error
EmpName 5 java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
com.bea.ld.dsmediator.DataServiceException: java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
     at com.bea.ld.dsmediator.update.JDBCAdaptor.save(JDBCAdaptor.java:247)
     at com.bea.ld.dsmediator.update.DataServiceMediator.submit(DataServiceMediator.java:528)
     at com.bea.ld.dsmediator.update.DataServiceMediator.submit(DataServiceMediator.java:245)
     at com.bea.ld.ServerBean.submit(ServerBean.java:529)
     at com.bea.ld.Server_ydm4ie_EOImpl.submit(Server_ydm4ie_EOImpl.java:910)
     at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
     at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:108)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
     at java.lang.Thread.startThreadFromVM(Unknown Source)
Caused by: java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
     at weblogic.jdbc.mssqlserver4.TdsStatement.processWarning(TdsStatement.java:1178)
     at weblogic.jdbc.mssqlserver4.TdsStatement.parseMsWarning(TdsStatement.java:1089)
     at weblogic.jdbc.mssqlserver4.TdsStatement.getMoreResults(TdsStatement.java:756)
     at weblogic.jdbc.mssqlserver4.TdsStatement.execute(TdsStatement.java:210)
     at weblogic.jdbc.mssqlserver4.TdsStatement.executeUpdate(TdsStatement.java:97)
     at weblogic.jdbc.mssqlserver4.TdsStatement.executeUpdate(TdsStatement.java:1455)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:147)
     at com.bea.ld.dsmediator.update.JDBCAdaptor.save(JDBCAdaptor.java:151)
     ... 15 more
But I am not sure why it is giving an exception as Violation of PRIMARY KEY.
The update method works fine for the same client.
The exception only happens when I am trying to insert a new record.
Please help me to figure out this problem.

If you are absolutely sure that you do not have such a row already in your table, open a case with customer support and reference CR321312. I believe the work-around is to put ld-server-core.jar in your client classpath.
Correction: put ld-server-app.jar in the client classpath
Edited by mreiche at 09/17/2007 3:28 PM

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

Is there anyway to stop iPhoto 9.6 creating a new unnamed album within a named album when I drag a new photo into the named album. for example: There is a album called Fred. I have a new photo of Fred imported into the Last import Folder. I wante

is there anyway to stop iPhoto 9.6 creating a new unnamed album within a named album when I drag a new photo into the named album. for example: There is a album called Fred. I have a new photo of Fred imported into the Last import Folder. I wanted to drag it into the album called Fred but iPhoto creates a new unnamed album within Fred.
Any ideas please. I am using Yosemite 10.1.1
Many thanks Jaz Eilles

Sounds like you have a folder with an album named fred inside of it. Folders can only hold other folders, albums, slideshows, etc. but not just photos. So you must be sure to drop the photo directly onto the album titled fred that resides inside that folder otherwise it will create a new album.
So expand the folder so the fred album is visible and drop the new photo onto the album.

Transparent integration of a new drive into the folder structure of a file server?

Hallo,
I'm looking for solution to a problem, that seams to be simple, but obviously is not that easy to solve:
I have to integrate a second external RAID system in to our MacOS X 10.6.8 Server based file sharing server that is accessed from Mac and Windows clients via AFP and SMB. I want to move one or two main folders from the old RAID to the new one, but this physical change has to be invisible to the users, as I don't want to confuse anyone.
So my idea was to mover the Folders to the new drive, and create symbolic links at the old locations pointing to the new locations. This works very well for the Windows clients accessing the server via SMB, but does not work for the Macs on AFP.
So I tried to move one folder to the new drive and mount it at the old location. Again this works fine for the SMB but does not work for AFP, the mount point does not show up in a directory listing via AFP.
Do you have any other idea how I might integrate the new drive in transparent way into the old folder structure?
Thanks for your input
Florian
PS: I could use SMB on the Macs but for some reason I, whenever I try to log into the server from a Mac via SMB, user name and password are accepted, but then the Mac client displays a message saying that I don't have the right to access the share. The same share works using AFP.

Define 'invisible' please.
Do you mean you need to be able to do this live, while users are on the system? or just that you can shut the machine down, reconfigure it, and bring it back up with the new configuration, even though the shares look the same to the users?
I'm guessing the latter, but it's worth asking.
Ultimately the problem lies in the way the file sharing systems deal with multi-volume sharepoints, and it's not easy. If you think about it, say you have a 1TB array handling the main sharepoint and you want to substitute one of the directories in that sharepoint with a new, empty 4TB array.
When the user mounts the sharepoint they get a little status bar at the bottom of the window showing the available space... how much is that? Well, initially it would be however much of the 1TB volume is unused... except if they switch to the linked directory they now have 4TB available (or thereabouts)... so the amount of space available has changed even though, from the user's standpoint, they're still on the same share.
It isn't valid for the OS to report 4 TB as free because that isn't the case unless you're in this specific directory.
It also isn't valid for the OS to report 5TB free, even though there is that amount of space altogether.
It also isn't valid for the OS to report 1TB free because you could upload 4TB of data if you put it in the right place.
There are few solutions to this. Microsoft sort of addressed this with their DFS solution in Windows Server, but it's not trivial.
Unfortunately you can't just blow it off and ignore the issue.
Off hand there's only one thing I can think of that *might* work. if it doesn't then you're down to using multiple sharepoints on the server, with users mounting both disks simultaneously (which can be automated, for what it's worth).
The one thing to try is to statically mount the second RAID at the appropriate location so that, as far as the OS is concerned, it looks like just another directory even though it's on a different disk. You'd do this by editing /etc/fstab and adding a line like
UUID=AABBCCDD-79F7-33FF-BE85-41DFABE2E2BA /path/to/mount hfs rw
to /etc/fstab (this file may not currently exist, so just create it as root).
The first field is the UUID of the drive (which you can get via diskutil info)
The second field is the path where you want this drive to appear in the filesystem - i.e. somewhere in the path of your sharepoint. There must be an existing (empty) directory at this path when the disk mounts.
The third field identifies the disk as HFS
The fourth field marks the disk as read-write
Now when the system boots it should locate this disk and mount it on top of the existing RAID volume. If you cd to your sharepoint you should see the existing drive and if you cd from there into your mounted directory you should be looking at your new RAID.
Now, this all works fine (or, at least, should do) from a standard OS standpoint. The big question is whether the AFP and SMB daemons honor and support this kind of setup... there's one way to try, of course...
Now for testing purposes you could mount it at a dummy directory, just to see whether it's available to network clients. If it is then your next step would be to clone the data from the directory onto the new drive, then edit the fstab to mount the disk at the appropriate location.
Note also that the entire volume will replace the directory you mount over - that means you can't replace two (or more) directories with one volume, but you can, of course, partition or setup your RAID into multiple volumes and mount each individual volume over a specific directory.

Integrating Adobe Connect into the portal

Anyone have any luck or experience with integrating Adobe Connect or another web conferencing software into the portal? We are potentially looking at integrating Adobe Connect.

Thanks Ashish. Yes, Connect is Adobe's new name for Breeze. I may give you a call soon because the customer is thinking about integrating to Connect or Windows Live soon, we're just evaluating feasiblity to integrating to each now.
Mike

Refresh jTable after inserting new data into the Database

Hey all,
I'm using Netbeans 6.5 to create a Desktop Application which is connected to a Java DB (Derby).
The first simple steps were all very successfull:
Create the jTable and bind it to the Database => everything works fine. When the application starts it correctly shows all data from the database.
The problem starts when I try to insert new data to the database.
For that reason I've created textfields and a button "Save". When I press the button it successfully inserts the data to the database but they are not displayed in the jTable (when the application starts they are all there, they are not updated at runtime) . I've tried table.invalidate() and table.repaint() but they just don't work.
Any help will be GREATLY appreciated. But please have in mind that most of the code is Netbeans-generated and most of it not editable.
Many thanks in advance.
George

Once again you are right my friend. I jumped to conclusion way too fast, when I shouldn't. (Give me a break, I've been busting my head with this well over a week). The response I saw when I did that was that indeed a line is added to the jTable. Because I falsly set the index of the object to be added to be second to last the row appeared on the table, what I didn't see at the time was that the last one disappeared. Hmm...
A new adventure begins...
So after a few hours of messing around with it here are my observations:
1) It was not an observable list. When I add the new element with employeesList.add(newEmp); , the table gets notified but a get a bunch of exceptions:
xception in thread "AWT-EventQueue-0" java.lang.IndexOutOfBoundsException: Index: 84, Size: 84
        at java.util.ArrayList.RangeCheck(ArrayList.java:546)
        at java.util.ArrayList.get(ArrayList.java:321)
        at org.jdesktop.swingbinding.impl.ListBindingManager$ColumnDescriptionManager.validateBinding(ListBindingManager.java:191)
        at org.jdesktop.swingbinding.impl.ListBindingManager.valueAt(ListBindingManager.java:99)
        at org.jdesktop.swingbinding.JTableBinding$BindingTableModel.getValueAt(JTableBinding.java:713)
        at javax.swing.JTable.getValueAt(JTable.java:1903)
        at javax.swing.JTable.prepareRenderer(JTable.java:3911)
        at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:2072)
        at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1974)
        at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:1897)
        at javax.swing.plaf.ComponentUI.update(ComponentUI.java:154)
        at javax.swing.JComponent.paintComponent(JComponent.java:743)
        at javax.swing.JComponent.paint(JComponent.java:1006)
        at javax.swing.JViewport.blitDoubleBuffered(JViewport.java:1602)
        at javax.swing.JViewport.windowBlitPaint(JViewport.java:1568)
        at javax.swing.JViewport.setViewPosition(JViewport.java:1098)
        at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.vsbStateChanged(BasicScrollPaneUI.java:818)
        at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.stateChanged(BasicScrollPaneUI.java:807)
        at javax.swing.DefaultBoundedRangeModel.fireStateChanged(DefaultBoundedRangeModel.java:348)
        at javax.swing.DefaultBoundedRangeModel.setRangeProperties(DefaultBoundedRangeModel.java:285)
        at javax.swing.DefaultBoundedRangeModel.setValue(DefaultBoundedRangeModel.java:151)
        at javax.swing.JScrollBar.setValue(JScrollBar.java:441)
        at javax.swing.plaf.basic.BasicScrollBarUI.scrollByUnits(BasicScrollBarUI.java:907)
        at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.mouseWheelMoved(BasicScrollPaneUI.java:778)
        at javax.swing.plaf.basic.BasicScrollPaneUI$MouseWheelHandler.mouseWheelMoved(BasicScrollPaneUI.java:449)
        at apple.laf.CUIAquaScrollPane$XYMouseWheelHandler.mouseWheelMoved(CUIAquaScrollPane.java:38)
        at java.awt.Component.processMouseWheelEvent(Component.java:5690)
        at java.awt.Component.processEvent(Component.java:5374)
        at java.awt.Container.processEvent(Container.java:2010)
        at java.awt.Component.dispatchEventImpl(Component.java:4068)
        at java.awt.Container.dispatchEventImpl(Container.java:2068)
        at java.awt.Component.dispatchMouseWheelToAncestor(Component.java:4211)
        at java.awt.Component.dispatchEventImpl(Component.java:3955)
        at java.awt.Container.dispatchEventImpl(Container.java:2068)
        at java.awt.Component.dispatchEvent(Component.java:3903)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3965)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
        at java.awt.Container.dispatchEventImpl(Container.java:2054)
        at java.awt.Window.dispatchEventImpl(Window.java:1801)
        at java.awt.Component.dispatchEvent(Component.java:3903)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Exception in thread "AWT-EventQueue-0" java.lang.IndexOutOfBoundsException: Index: 84, Size: 84
        at java.util.ArrayList.RangeCheck(ArrayList.java:546)
        at java.util.ArrayList.get(ArrayList.java:321)
        at org.jdesktop.swingbinding.impl.ListBindingManager$ColumnDescriptionManager.validateBinding(ListBindingManager.java:191)
        at org.jdesktop.swingbinding.impl.ListBindingManager.valueAt(ListBindingManager.java:99)
        at org.jdesktop.swingbinding.JTableBinding$BindingTableModel.getValueAt(JTableBinding.java:713)
        at javax.swing.JTable.getValueAt(JTable.java:1903)
        at javax.swing.JTable.prepareRenderer(JTable.java:3911)
        at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:2072)
... and a lot morewhich from my poor understanding means that the jTable succesfully notices the change but it is not able (??) to adjust to the new change. What is more interesting is that when I plainly add the element to the end of the list (without an idex that is), a blank row appears at the end of my Table. The weird thing is that I've bound the table to some text fields below it, and when I select that empty row all the data appear correctly to the text fields.
I tried going through:
                org.jdesktop.observablecollections.ObservableCollections.observableList(employeesList).add(newEmp);as well as
                help = org.jdesktop.observablecollections.ObservableCollections.observableListHelper(employeesList);
                help.getObservableList().add(newEmp);
                help.fireElementChanged(employeesList.lastIndexOf(newEmp));and
                obsemployeesList = org.jdesktop.observablecollections.ObservableCollections.observableList(employeesList);
                obsemployeesList.add(newEmp);and I still get the same results (both the exeptions and the mysterious empty row at the end of the table
So, I'm again in terrible need of your advice. I can't thank you enough for the effort you put into this.
Best regards,
George
Edited by: tougeo on May 30, 2009 11:06 AM
Edited by: tougeo on May 30, 2009 11:21 AM
Edited by: tougeo on May 30, 2009 11:30 AM

[SOLVED]Unable to boot into the kernel I compiled, kernel panic

I try to compile a kernel myself and boot into it, and I use virtualbox to test it. (arch guest inside my arch host) I first copy /proc/config.gz of my guest system to the linux source code directory, rename it to .config, and just compile it. After that I copy the image under arch/x86/bzImage to /boot directory, then I follow the instruction given by the arch wiki to create an entry in grub. Here is my /etc/grub.d/40-custom:
#!/bin/sh
exec tail -n +3 $0
menuentry 'Custom Entry' {
set root=(hd0,msdos1)
echo 'Loading Modified Linux'
linux /boot/vmlinuz-modified
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
following is this command:
grub-mkconfig -o /boot/grub/grub.cfg
But after reboot I cannot boot into the new kernel, it shows "unable to mount root fs on unknown-block(0,0):
https://img.vim-cn.com/e5/5227d8d4cc07c … ce81ee.png (choose "Advanced Option for Archlinux-> With Linux Modified")
https://img.vim-cn.com/a9/12869edfbbca1 … 649380.png (choose "Custom Entry" on the first page directly)
I have searched for a while but didn't find a solution. Is there anything I'm doing wrong, please?
Last edited by Frefreak (2015-05-07 10:48:05)

Head_on_a_Stick wrote:
Frefreak wrote:I think I did compress it, if I remember correctly. (I actually built it several times)
I am referring to /proc/config.gz -- this is a gzip archive and needs to be decompressed before you can use it to compile your kernel image.
This isn't strictly true, it just makes the process easier because you're starting with a sane .config (assuming you're booted into one of Arch's official kernels at least). You can start from scratch, but you need to know what you're doing.
Frefreak wrote:Ok, I'll rebuild everything from the beginning later.
No need to rebuild everything, just generate an initramfs for the custom kernel. The initramfs contains modules that are specific to a the kernel image that they were generated for; this is probably why /boot/initramfs-linux.img isn't working for you.

I'm trying to write an Applescript: when I add a file to a folder, I want finder to name it "1" and increment the other files in the folder by 1. i.e. once I drop a new file into the folder, the file originally called "1" will be renamed "2" etc

I'm trying to write an Applescript. I have never used Applescript but my boss has just asked me to write a script so I dutifully nodded and said "Yes Boss"...
The funtionality I need is that I want finder to rename the files in folder when I drop a new file in. When I add the new file (file neame: "1") to a folder, I want to increment the other file names in the folder by 1.
So when I drop a my new "1" file into the folder, the file original file called "1" will be renamed "2", the original file named "2" will be renamed "3" etc
I'm creating a 'stream' of images. When I add a new image i want it to nudge the other images in the folder along.
Thanks guys!

Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/1986834#1986834

Adding a new tabpage into the Cprojects

Hi,
I am working on cprojects. I have added a new tab page by the method of Global Enhancement to Cproject, and successfull in getting the link in the tab page. I've created a webdynpro component and attached to that particulat tab.
The requirement is to generate a report in PDF format from the new tab. I am able to get the output of the report and print also. Once after getting the PDF output, i am not able to move into the next tab to do other activities. Also i am forcefully terminating the Cprojects.
Expecting reply.
Regards,
Shankar.

Row r = vo.createRow();
//insert row
vo.insertRow(r);
//commit changes
DCIteratorBinding iter = getIteratorBinding();
ApplicationModule am = null;
am = iter.getDataControl().getApplicationModule();
am.getTransaction().commit();
//

I bought a new MacBook Air a few weeks ago and asked them to transfer data from my very old MacBook and they turned the new computer into the old one, essentially, that doesn't think I've got the latest operating system OSX 10.8.5 installed on it!

How do I get the old operating system and data put into the background and have the new computer be a new computer with me recognized as an authorized user?

Hi, I see I haven't had any responses but these problems haven't been fixed.
I still haven't been able to transfer purchases from my phone to my comp so consequently have stopped purchasing on my phone.
I bought a couple of albums recently via itunes on my comp, and tried to tranfer them to my phone via a playlist, but the sync often crashes. One album transferred except for one song, and the other hasn't at all. What happens is that when I autofill from a playlist it often hangs for ages on the first song and then I have to quit the application altogether as nothing happens for ages. Basically, the whole Itunes software freezes.
After this I find it hasn't transferred any songs, but they do appear greyed out on my phone, which means it has transferred some basic data such as the titles, but not the song itself. When I try to repeat the process to complete the transfer Itunes tells me that it can't transfer because the songs are already on the phone, but they are not!! I can't click or remove on the greyed out items, so now I have a couple of almost full albums on my computer that I can't tranfer or install on my phone, and a whole bunch of greyed out songs on my phone that I can't play or remove!
The rest of the problems as above still stand. I downloaded the latest itunes OS updates but nothing's changed. I haven't done the very latest iphone update yet though because it says you need to make sure your stuff is backed up, and I don't want to lose the purchases I made on the phone that I can't transfer to my comp. I'm planning on uninstalling itunes completely and reinstalling but I have little faith that this will fix the issue.
Can someone please help at all?? I'm so sick of this!

My iPhoto keeps on crashing every time i go to type new names into the faces tab.

When i am in the iphoto program on my MecBook Pro its keeps on crashing every time i go to type in new names. I have read a post on this forum that said to turn off photo stream and that did not work. Any thoughts?

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box.
[[Image:aboutcrashesFx29|width=520]]
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

I can't get my music from my Ipad onto my new laptop into the itunes library

I cannot get my music off the Ipad into the itunes libary on my new computer.
If I tick the box it says that I will loose all the music.
I did a test run on my I 5 and lost all the music.
Please help

Stack69 wrote:
I cannot get my music off the Ipad into the itunes libary on my new computer.
1) From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.
2) If you do not have access to the iTunes Library on your Old computer... or its Backup...
See these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

Can not change the font size in a new text into the smartforms

Hi!!
I have a Footer window into my smartform and I've created a new text into this one
text type: Text element
nothing extrange.
I copied and paste a text from a word document and after that I want to change the font size to 8 and font style to Arial, but after saving the font size and styles goes back the 10 and Currier New.
Any idea?
I also tried typing the hole parragraph and I get the same issue!...
Thanks.

Hi
First Reset paragraph and Character and then set the new fontfor the same.
dont copy the same into word and back form
also goto change editotr and check the style used for the same.
Regards
Shiva

[Solved] Integrating new Partitions into the Filesystem

Similar Messages

Maybe you are looking for