(SOLVED) K8N SLI Platinum won't post with Saphire 5750

Hi everyone. Hope you all had a nice Xmas.
This is my first post on the forums. I’m from Portugal ,so I might write things that won’t make much sense to you but I´ll try to keep it simple.
I bought a Sapphire 5750 vapor-X for my kid's PC and I’m afraid I’m yet another one with the “black screen, no post” syndrome. I have tried the card on another system and it works fine.
What I did:
Remove old card (6800GT)
Put new card in
Reset CMOS
Switch PC on… no image on screen.
The fan on the graphics card starts spinning, the blue lights are ON, but no dice. My HDD LED stays on, my CD+DVD drives LEDs keep flashing but system won’t post, not even show MSI logo.
If I remove new card and get my old one back in the PC, it will post first time.
I have spent Xmas reading forums and haven’t found anything but a lot of ppl with the same problem and no real solution for it.
Hope you guys can help .

MSI forum:
Quote
Yup,I think I have the same issue with you,man.But I have solved it as I flash the latest beta bios V192.Contact MSI Online OCSS to get the BIOS to solve your issue...
https://forum-en.msi.com/index.php?topic=131546.0
1 thread hinting a board cant support Gen2 cards:
Quote
Comments:
Nov 18, 2009- BTW, I do not even get to BIOS screen at all. All is black as if no card is plugged in.
Nov 19, 2009- After a few hours of search the result is:
Some ASRock boards do not support GEN2 video cards (such as Radeon HD 5770).
Only solution found: New motherboard.
http://www.fixya.com/support/t3235972-asrock_wolfdale1333_d667_radeon_5770
AMD forum
Quote
If i remember right 1.0 is x8 and 1.1 is x16 and i far as i know it will never work as this issue go's back 2 years when the 8800GT hit the market and it would not work on PCI Express 1.0 but it would on 1.1
http://forums.amd.com/game/messageview.cfm?catid=260&threadid=124445&enterthread=y
driver heaven:
Quote
Warning about the HD5770 well at least on my computer the XFX HD5770 + a PCIe 1.0 slot = doesn't work. Again this was on my computer. I have another computer that it ran on fine using a PCIe 2.0 slot (Asrock 780g board), but my MSI K9A Platinum would not power that card. So you may need to replace your motherboard if it uses a PCIe 1.0 slot.
http://www.driverheaven.net/ati-graphic-cards/191317-5770-performance-increase.html#ixzz2jP3dOQ9e
allover ppl are having problems with 5xxx series on older systems.
i know some comments, solutions and explanations are closer to witchcraft than anything else but where there is smoke.....

Similar Messages

MSI P6N Sli Platinum won't Post with E8500

Ok, I've been pulling my hair out on this one off and on for a couple of weeks, and I figured I'd finally just post here and hope for some advice.
I recently bought a C2D E8500 CPU on newegg to replace the E6420 I currently have running in my system. The motherboard is a P6N SLI Platinum with the v1.7 Bios. The problem is that whenever I swap the E8500 in for the E6420 the computer powers on, fans start spinning, and then it just sits. No beeps, no lights, nothing. When I put the E6420 back in the whole thing boots up just fine. I've cleared the CMOS two different ways (removing the battery and hitting the CMOS reset button), and nothing seems to help. I have tested the CPU in another machine, and it works just fine. The MSI tech support has told me that the problem shouldn't be happening, and has suggested that I RMA the board to them. I'd rather not be without my computer for 3-4 weeks, so I figured I'd post here and see if anyone had any advice before I pull the whole system apart and send the MB in.
PSU is a 700W OCZ
Graphics Card is EVGA 9800GT 512MB
Ram is 4GB AData
Let me know if anyone sees any obvious problems.
Tim

I please have a look here:
https://forum-en.msi.com/index.php?topic=123486.msg932471#msg932471
Sending the board to MSI to be serviced is probably your only option to solve this.

K8N Neo4 Platinum - won't post with cards in pci slots

Hi
Just completed a new build - with 3800 + Dual processor - everything works fine but when I plug a PCI card in any PCI slot the computer then refuses to even post.
I've tried different cards and all of the pci slots but it makes no difference. Could it be a driver problem ? When I remove the card and try again the computer then starts up as normal.
Any ideas would be greatly appreciated.
Cheers
Biamp

Quote
everything works fine but when I plug a PCI card in any PCI slot the computer then refuses to even post.
I've tried different cards and all of the pci slots but it makes no difference.
1: PCI cards are bad, most likely your problem
2: PCI slots on MB are bad, highly doubt this
3: PCI cards drawing to much power, very doubtfull
4: ?

K8N SLI Platinum Won't boot...

Hello!
Yesterday i got my computer parts, i slowly assemblied it and read all the instructions.
The parts was:
MSI K8N SLI Platinum
AMD Athlon 64 3500+ 2.2GHz Socket 939 (Boxed)
Asus GeForce 7800GT 256MB GDDR3 2xDVI-I
Corsair TWINX Xpert 3200C2 DDR 1024MBC
Tagan 420W PSU(I didn't get any info from the reseller about me needing atleast 450W, but it booted so im happy)
Samsung SpinPoint P120S 250GB SATA2.
It booted and i was happy, i installed all drivers from the cds and installed a game and it ran smooth.
I looked up on nvidia.com and saw that there was a newer driver for my graphics card so i downloaded them and got asked to reboot my computer and so i did.
But it didnt get any further than the re, since it didn't boot up...
All the fans are running in the computer, the memory display started and displayed info.
The screen was dead and by pressing numlock repeatedly on my keyboard i noticed it didn't work either.
I've tried to change spot on both the SATA disc and the Graphics Card. I've tried to reset cmos by holding the button.
And now im out of ideas
Thanks in advance /Hugge

Quote from: SAB on 17-September-05, 19:44:06
If you have your D-Bracket connected, what light pattern is it displaying!? Also, recheck your physical SATA connectors, as they have a tendency to back out.
I had it at first, but when i moved my gfx-card i removed it.. Should i connect it again?
Edit: Ok now i saw what use it has, i will connect it and i'll be back in a few..

P45 Platinum won't POST with full memory banks

I have 4 identical 2GB DDR2-800 modules. If I install 2 the system runs fine. If I install 4 the system will not POST, hangs with the memory code. I am replacing an old P35 Platinum that had exactly the same problem (though I was using 1GB modules with that instead of these 2GB modules). 2 modules fine. It doesn't matter which 2. 4 modules bad. Won't POST. Is there some setting that prevents you from using both banks unless you change it?

They are PNY Optima. I am running them at the default timings (I think the default is for BIOS to handle it itself with SPD). I probably wasn't clear before but both modules are installed in the same bank (both in orange or both in green). I just can't fill more than one bank and get it to POST. These modules all work fine independently. There is some board/BIOS issue that is not allowing me to use both banks. I had the same exact problem with my P35 Platinum with different modules. I could run one pair, but not two pair.

Can't get K8N Neo4 Platinum Edition to post with Dual Core 3800 Processor

I'm doing a sytem build with a K8N neo 4 Platinum board bought second hand off Ebay and can't get the board to post - when I power up all the fans etc come on but there is no beep and the "D" bracket lights stay on solid - 2 amber and 2 red. Having read numerous posts on this forum I've fiddled about with memory in different slots etc and pressed the reset CMOS button but to no avail.
The problem is (apart from the possibility I've been sold a "duff " board !) that I've no idea what version of BIOS is on the board and of course I can't get into the BIOS to see or update it. I understand a BIOS update may be required for the dual core processor - does this mean that if the board doesn't have the correct BIOS it won't recognize the CPU at all which is why I am getting these symptons? Alternatively could the problem lie elsewhere ? I do have another computer with an AMD single core CPU but at this stage don't really fancy taking out this CPU and trying it in the K8N board.
Any advice would be appreciated

-Take the motherboard out of case.
-Unplug all hardwares and power cords, then clear CMOS as the mannual has described.
- Plug one memory, VGA card and power cords, then start the system and check if it could boot.
-If it still couldn't boot, check the CPU support tableand make sure your board support this board. After this, I think you should take another single CPU to the board to check if it could boot. If it could, try flash bios to the latest one so that this board could support this CPU.

K8N SLI Platinum (Seasonic S12 500w with -5v?)

My OCZ Modstream died, so i bought Seasonic S12 500w instead. The question is: Does the Seasonic have -5v pin?
Please, help needed fast.

Quote from: Supershanks on 27-July-05, 03:25:13
The units shown as ATX12V v2.0 which I think doesn't have -5v as part of the std, there's no mention of it in the data sheet which otherwise looks comprehensive. May be worthwhile E-mailing them, but it don't look good.
No Sound on K8N Neo 4 Platinum Sli//K8N Diamond shows a list of PSUs that have -5v.
hope u get sorted.
luck
Thx for a fast reply! After a lot of searching i found out that there were no -5v pin.
So. ill have to find another PSU again. Man that sucks!

Another little niggle with the MSI K8N SLI Platinum

Hello, I have just been benchmarking using Everest.
I did a mem read test and the result below is wrong, I have an amd64 venice 3200.
I had run this test earlier in the day and it was showing the 3200.
CPU   CPU Clock   Motherboard   Chipset   Memory   Read Speed
Athlon64   2000 MHz   MSI K8N Diamond / K8N SLI Platinum (MS-7100)   nForce4-SLI   Dual PC3200 DDR   5270 MB/s
thanks
ps. I have just noticed that outlook express is taking twice as long to open :(
pps I must have had to much to drink, or something just got logs from mirc and here is what it said
Athlon64   2000 MHz   MSI K8N Diamond / K8N SLI Platinum (MS-7100)   nForce4-SLI   PC3200 DDR SDRAM   3045 MB/s
This is what it is reading after sorting the ram stick problem out.
CPU   CPU Clock   Motherboard   Chipset   Memory   Read Speed
Athlon64   2000 MHz   MSI K8N Diamond / K8N SLI Platinum (MS-7100)   nForce4-SLI   Dual PC3200 DDR   5259 MB/s
Sorry for time wasting

Sorry flow, took to long to edit post
https://forum-en.msi.com/index.php?topic=88965.0
this explains a little, and yes I have just built this comp, first attempt at a serious upgrade. Apart from problems with faulty stick of RAM in the beggining everything has run smoothly.
Then I discovered benchtesting and as I said earlier, am a bit how can I say it, mellow so thanks for the reply, and I hope you are still here when I attempt to overclock
I knew I should have come here first

[Resolved] No boot with K8N sli Platinum & AMD 64 X2 3800+

Hye,
I've received these new stuff last night (everything is good until here) :
- Antec Sonata II 450W
- MB MSI K8N SLI Platinum
- Proc. AMD 64 X2 3800+
- GC Sapphire X800 XL 256Mo
I've assembled all and turned it on... No bip... but all the fans are turning... and the screen says "No signal" and becomes black ( and me )
Can someone help me? Please?
On the MSI site, I also found this :
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=641&kind=1
Maybe the proc. and the Motherboard are not compatible? Has someone already tried this combinaison (MB+Proc.)?
My Thanks in advance.

Quote from: darinn on 12-November-05, 03:22:08
I will ask the sellers if they can update the Mobo for me.
But with the last version of the bios, will the mobo accept the dual-core with this proc. AMD 64 X2 3800+?
And if it's not possible I'll change the mobo.
Thanks .................................. again.
Pretty much any SLI motherboard supports the X2 3800. MSI is just really pathetic sometimes. So, I had the Abit AN8 SLI before and their latest BIOS (17) supports all X2 CPUs. But Im sure most other brands support them too.

Is the Hiper Type- R 580 modular PSU compatible with MSI K8N SLI Platinum?

Hey guys, i just recently bought a Hiper Type R 580w PSU after my old PSU went bad.
I installed the new PSU a few hours ago and came across a problem, nothing shows up on screen.
When i turn on the computer, the green light is constantly on including my dvd/rw light.
I double checked everything were connected properly and everything seemed to be connected properly.
The cpu's fan are running properly including the graphics cards and the case's fan but i can't pinpoint whats causing the the green activity light to light constantly including the dvd/rw.
I also tried resetting CMOS but it didn't fix the problem.
So now i'm starting to wonder if it's to do with compatibility issues between the Hiper Type R PSU and my K8N SLI Platinum motherboard.
So i just wanted to know if the Hiper Type R 580 PSU is compatible with the K8N SLI platinum?
I would grately appreciate any assistance.

In short no.
The Hiper Type- R 580 does NOT have a -5V supply line
Although the -5V requirement has been removed from some MSI designs, the MSI page for the K8N SLI Platinum http://msicomputer.co.uk/Products.aspx?product_id=703525&cat_id=77 states:
Quote
MSI Reminds You...
• These two connectors (JPWR1 & JPWR2) connect to the ATX power supply and have to work together to ensure stable operation of the mainboard.
• Power supply of 450 watts (and above) is highly recommeded for system stability.
• For ATX 12V power connection, it should be greater than 18A.
• For this model, you must use the power supply that with a -5V pin supply.

MSI K8N SLI Platinum crashed with my videocard

Hi. I don't speak english very vell, so sorry
A bought an MSI K8N SLI Platinum mainboard, 7800 GTX Videocard and I don't know use it with NON SLI mode If the SLI card there in NON-SLI mode, my pc isn't run. Just black screen, and the D-Bracket is show, that the booting is stopped in memory-control (second LED is red.) If I turn my SLI card for SLI mode, accordingly the PCI-E bus is 8x and my PC is run.
My problem is that, that I don't know run my pc in PCI-E x16
I tried 6 BIOS, but always was this is the problem
Ha van itt magyar ember, akkor magyarul a probléma:D:
Szóval van egy ilyen lapom, de nem tom használni 7800 GTX-el. Egyszerűen nem tudom használni non sli módba, a kép mindig fekete és memória-ellenőrzésnél megáll sli módban meg megy a gép, de csak 8x-os üzemmódba. ugyan ez a hiba egy 6600 gt-vel is. Szóval helllllp

Quote from: ChakkaSol on 30-October-05, 08:57:50
First, search the internet for a free translater program and cut n paste. Second, you need to place the graphics card in the pcie slot next to the cpu. Third, you need to make sure the SLI switch card is placed "non-sli" with the arrow pointed towards the graphics card. Finally, you need to make sure your SLI switch card is fully in place so the copper teeth dont show (I made that mistake and my rig didnt boot either). Just my 2 cents.
1st -- ok
2nd - the video card is there next to the cpu in 1st PCI-E bus
3rd -- the SLI switch card is placed non-sli with the arrow pointed towards the graphics card.
fin --- well, i have no idea about this, 'couse after i've removed the card, i could not push it back to its place fully anymore, so the copper teeth show up. I also tried to force it with a screwdriver, but it didn't work. but i can turn on the card holder

Problems with older PCI-Videocards on K8N SLI Platinum ??

Hi there,
i just recieved my K8N SLI Platinum (without NEO) yesterday. Unfortunatly my new PCIe-Videocard isn't here yet,
so i just built my rig with an old S3 Trio64 to install Windows etc. and to have at least my PC for some surfing and so on...
The problem is:
The Card is marked with an ! in the device-manager. It says the card couldn't get its required resources, and that i'd have to
disable some other device of the system first to fully use the videocard. I checked for IRQ's, but the card has an exclusive one.
I put it in the second (middle) PCI-Slot on the board. Due to that error, the drivers are not installed correctly and the performance
of the display is ... well its even to slow for scrolling pages while surfing ... thats realy anoying, and my PCIe-card will not be here
until the end of next week
I even manged to get another old PCI-dinosaur, but with no luck. The same Problem persists. So i think it's some problem with
the board or some iossettings. The only thing regarding display in the bios was the PCIe / PCI switch which is correctly set to PCI.
So if anyone knows how to get an old PCI-card running in that board, please help me
[ApoC]

Well,
"f***ing up" the OS is not a problem, i got a GHOST of my perfectly fresh & clean OS.
I have disabled:
both SATA-Controllers (still running on good old ATA Samsung SpinPoint P80)
the FireWire-Controller (which is shown in Windows anyways )
I changed the videocard from PCI 2 to PCI 1, with the only result that it shares IRQ with the OnBoard-Soundblaster in slot1.
In slot2 it gets an exclusive IRQ. The problem is, i can't even see what resources are making trouble since Windows doesn't
show any information in the cards resource-infos but that it ain't working (say what?)
*sigh*
[ApoC]
Edith says:
I remember problems with the APIC-Mode on many nForce-2 Boards. Could this still be a problem? Any infos on that matter yet?

K8N SLi Platinum USB keyboard boot issues

Hello, I have a K8N SLi Platinum connected via an Aten US221 USB switch (http://www.aten-usa.com/?product&cat=804&Item=US221) and a Kensington USB hub to a Logitech MX518 mouse and a Logitech multimedia pro keyboard. I use this to connect the same two input devices to two computers and toggle. Previously I used a keyboard to each, with a Dell PS/2 used on the MSI motherboard.
The problem is that the MSI motherboard fails to detect the keyboard every other boot or so. It doesn't matter if I unplug the Aten switch, the USB hub or even connect it directly to the USB root hub. The only thing that solves it to restart the MSI computer over and over until it decides to start working. And I need the keyboard since I have a bootloader (GRUB) that I select which OS to boot with. The switch and keyboard works without a hitch on an older Dell computer which is also connected in tandem.
Since I need both mouse and keyboard on a single wire I cannot use a USB-to-PS/2 connector. I've found several posts here which suggests this motherboard is buggy, if that's the case shouldn't MSI issue some sort of BIOS patch?
Sincerely, Martin "xarragon" Persson

Might work.
I don't like the inconsistency you describe: working sometimes and after a lot of reboots. Would you say your system parts, please. Troubleshooting this in your end must include finding a situation where it never works, and when it always work. For example, if you don't have the mouse connected at all, if you don't use the hub, etc.
Not saying motherboards can't be damaged, specially port end, but the hub thing is a more likely culprit.

Can K8N sli Platinum be upgraded for PCIE 2.1?

Hi. Quick question as per the subject. Can the K8N sli Platinum motherboard BIOS be updated to recognise a PCIE 2.1 MSI R5570 graphics card.
We did one BIOS update using the Live Update online thing but when we try and check to see if another newer update is now due the PC shuts down and says that we have got to undo an overclocking thing!!! The BIOS update was dated something like July 08 and I don't know if PCIE 2.1 was around then.
I now assuming that there isn't a BIOS update for this motherboard to allow PCIE 2.1. Bit worried that the BIOS update that we did has done something bad although everything other than checking for the updates again seems to be working? Just putting Windows 7 on and that seems to be going fine.
Do I send the graphics card back, or can I upgrade the motherboard and still use all or a lot of the rest of the existing items like the CPU and the memory, or will a new motherboard which accepts PCIE 2.1 pretty much force an upgrade to the whole lot? CPU = AMD Athlon 64 3500+ and memory = Corsair (TWINX1024-3200XLPT) 1024MB (2x512M Matched Pair). Things like wireless and disk drive etc shouldn't need changing would they?
Thanks

Quote from: Svet on 04-December-10, 21:26:07
No, the board is too old
Based on posts on this forum, i bought Radeon HD 4770, so not to get 5xxx series, i was eager to get. But nevertheless MSI K8N Diamond won't boot with 4770. Error code says it halts on "Testing VGA Bios".
And when searching for possible fixes i came upon AMD forum where people were complaining about the 5xxx series not working with nForce 4 chipset, but most of them got an easy fix - email the support of the mainboard company and recieve new BIOS - so all the Gigabyte users got their machines running by just sending 1 email and waiting for few hours.
I do hope MSI will respond and be as generous as the rivals, otherwise it will look bad for future buyers.

Can't open BIOs Set-up, K8N SLI Platinum, after re-flash

I used the USB Bio flash tool from the forum to re-flash the BIOs on my K8N SLI Platinum board to the latest BIOS from the MSI site, specs below.
After the re-flash, which seemed to go okay, I cleared the CMOS (turned off and unplugged computer, pushed the clear cmos button for about a minute), and re-booted.
I get a checksum error, no floppy found. I don't have a floppy drive in any case. But then I am unable to enter the bios. Pushing delete at boot gets me a screen that's blank, save for a cursor in the upper left corner. I can't enter anything from there, ESC key doesn't do anything. So I have to reboot.
I can get to the POST screen and pressing F1 allows the system to start and get to Windows, which seems to run okay. System shows that the new BIOS is installed. I just can't get into it to re-set to default settings.
If I turn off the computer, I get the checksum error again and in Windows clock and date have to be reset. But if I just reboot I just have to go through the no floppy found, then push f1 to get back to windows which has retained settings.
I tried doing the flash procedure again and got same result. I haven't tried flashing back to the old BIOs yet. MSI's site only lists the most recent BIOs, my preference would be to try a different one, but not as old as the 2005 version that was on there.
Hopefully someone can tell me something obvious that I'm missing here.
Rick
Windows XP Professionnel
Version   5.1.2600 Service Pack 3 Nu 2600
Motherboard K8N SLI Platinum, with Nvidia nForce 4 SLI chipset
Model   MS-7100
Typ   X86-based PC
AMD 64 3500+ ~2211 Mhz
BIOS/Date   Phoenix Technologies, LTD V 3.12, 10/27/2008
Version SMBIOS   2.3
4,096.00 Mo RAM

Quote
I'd also like the RAM to run at at least 333, rather than the 200 something it runs at with this BIOS.
Check this with CPU-Z at "memory tab" ==> http://www.cpuid.com/cpuz.php
BIOS post screen info can be incorrect., or current older BIOS by 200MHz it may means 400DDR In all cases its cosmetics,
the way of showing real of effective freq. can be changed in future version.
Also with four sticks it should be shown as either 333 or 166, not 200 or 400
Best check with CPU-Z how they are running
Quote
It may now be possible to put something faster in there, but I don't know that for sure. But the 4000+ should improve performance a bit.
Such old CPU's can't be found easy in present days, also its not good investing to invest in old stuffs.
You want W7 and such, changing to the best CPU wont improve much the performance in overall..
Soon or later you have to change it, then this and eventually "newest" CPU which you gonna get will became useless.

(SOLVED) K8N SLI Platinum won't post with Saphire 5750

Similar Messages

Maybe you are looking for