[solved] local repo not listed during -Sy

So the loal repo "[myrepo]" is defined in pacman.conf:
$ cat /etc/pacman.conf | grep -A1 myrepo
[myrepo]
Server = file:///home/filip/pkg/64bit
But when I do pacman -Sy or -Syy, pacman output looks like this:
$ pacman -Syy
:: Synchronizing package databases...
testing 24.7K 424.3K/s 00:00:00 [###################################################] 100%
core 31.4K 451.0K/s 00:00:00 [###################################################] 100%
extra 396.6K 238.3K/s 00:00:02 [###################################################] 100%
community 354.0K 489.2K/s 00:00:01 [###################################################] 100%
The local repo is not listed among the repos that are refreshed, but it does appear to be refreshed, because when I search for a package in this repo I can find it without any problems:
$ pacman -Ss exo
extra/exo 0.3.4-2 (xfce4)
Extensions to Xfce by os-cillation
myrepo/exo 0.3.4-2 (xfce4)
Extensions to Xfce by os-cillation
Is this a bug in pacman 3.2? A feature? A problem on my system? Can someone confirm before I file a bug report?
Last edited by fwojciec (2008-08-18 19:09:19)

It was an "incomplete feature" of 3.2 which will be dropped in 3.2.1 :
http://projects.archlinux.org/?p=pacman … 576a447b5b

Similar Messages

[SOLVED] CUPS does not list Canon PIXMA MP500 printer in Add Printer

I'm finally getting Arch up on my desktop (second time I've fooled around with Arch seriously) and it's been going smoothly so far. I've hit a roadblock when trying to get my printer (multipurpose Canon PIXMA MP500) set up with CUPS. I've followed the wiki directions on CUPS and "CUPS printer-specific problems" to get it installed. dmesg gives me information saying it's plugged in via USB, and the scanner on the printer works with sane/xsane with no additional configuration. However, CUPS isn't displaying the printer in the Add Printer dialog on the web interface after I've logged in as root; it's giving me Serial Port #1, Serial Port #1, and CUPS-PDF.
I can't find information about an MP500-specific driver, and I don't know if using the MP540 driver is what I need. I'm stumped with this; has anyone tried to install this printer before, or gotten it to work? Thanks!
Last edited by polyphanes (2011-12-06 01:50:22)

Success! I got CUPS to recognize my printer by using cups-usblp and removing usblp from the blacklist. The printer now shows in the add printer dialog on the web interface. I originally had an error "Add Printer Canon_MP500 Error (Unable to get list of printer drivers: Unknown)" when adding the printer; however, after installing the most recent cnijfilter-common from the AUR and a good reboot, I was able to add the printer and select a driver "Canon PIXMA MP500 - CUPS+Gutenprint v5.2.7", and it works!
Marking this thread as solved.

After updating to iTunes 12 the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

Local node not included in the list of host names for grid installation

I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
[FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
ACTION: Include the local node in the list of host names for grid installation.
Edited by: 982828 on Jan 18, 2013 1:18 PM

Hi,
what Oracle Version are you trying to install?
Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
Regards
Sebastian

List of data targets is not visible during data upload

Hi all,
I am trying to load user defined transactional data into an info object, i will do all necessary customization steps such as creating application component,assiging data sources,creating info packages and then creating update rules in info cubes, moreover i wrote a routine which calculates sales reveune based on cost and quantity sold.
My problem is that when i created infopackage , it does not list any data targets, Plz any one can give tips in this regard.
thanks in advance
regards,
a.fahrudeen
Message was edited by:
FAHRUDEEN MUSTAFA

Hi Fahrudeen,
Am a little confused here... you say you want to load Transaction data and load it into the InfoObject?? what was that??
You can load the Transaction data only into your data targets such as InfoCube and DataStore Objects... If you are loading the data into your InfoObjects, then that would mean that you are loading the Master data for which obviously you won't have your data targets listed in your InfoPackage... Only in case of loading the transaction data would you have your Data Targets listed in your InfoPackage...
Regards
Manick

Bookmarks LIST does not load during startup.

Until recent Firefox update, my BOOKMARKS list would automatically load during Firefox start up. Now when starting up, I must every time manually select "View", "Sidebar" & "Bookmarks" to populate Bookmarks list. How do I reestablish the automatic Bookmark list during start up? Thx, Gerald

A possible cause is a corrupted file localstore.rdf.
See http://kb.mozillazine.org/Corrupt_localstore.rdf

Dispacher and server0 is not started during NW2004s installation

Hi,
Dispacher and server0 is not started during NW2004s installation. SAPInst is stopped on the step of the 'Start java instance'. SDM is 'running' but dispacher and server0 is 'Starting framwork'. So I configured the some parameters via configtool but I can't solve this probelm. I found the some error logs as the followings.
(22503) Starting local Command:
Command: en.sapMPP_SCS33 pf=/usr/sap/MPP/SYS/profile/MPP_SCS33_spdeai01
listen failed on port/service sapdp33
initialize_global: another instance of the enque server seems to be running. EXIT
***LOG Q01=> MsSInit, MSStart (Msg Server 1 22502) [msxxserv_mt. 1818]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/MPP/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1]   1 : [10.223.50.15] spdeai01 (HOSTNAME)
[Thr 1]   2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1]   3 : [10.223.50.215] 10.223.50.215 (NILIST)
[Thr 1]   4 : [10.223.50.115] 10.223.50.115 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = spdeai01
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to internal port 3933 (3933) ***
[Thr 1] *** HTTP port 8133 state LISTEN ***
[Thr 1] CUSTOMER KEY: >Q0820898445<
[Thr 1] Wed Oct 24 18:28:11 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110500] into logged in list
[Thr 1] Wed Oct 24 18:28:21 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110550] into logged in list
Our JDK version is '1.4.2_11' and We are installing on the HA environment.
How can I solve this problem? or What should I check about it?
Best Regards,
David.

Check if the Database serivice is up and running. If this is not so.. you might have to start all over again..!!
VJ

AIF - Custom (local) Repos

Hey,
I have the following issue:For my studies, I try to make an installation CD for arch including custom packages from a local repo. Therefore I copied the repo files onto the overlay (overlay/home/repo_carolo) and edited the pacman.conf in overlay. If I type in the command pacman -Sy, all repos do work - including the custom repo (named carolo). But if I try to access to carolo from aif automatic script, it does not find the repository.
Here's my config file for automatic installation
<code>
# this config explains the (all) available options.
# the variables are optional and we define their defaults here (so you could omit the
# definitions), unless otherwise specified.
SOURCE=cd
FILE_URL=file:///src/core/pkg
SYNC_URL=
HARDWARECLOCK=localtime
TIMEZONE=Europe/Berlin
HOSTNAME="caroloDHBW"
LOCALE="de_DE.utf8"
KEYMAP="de"
LANG="de"
eth0="dhcp"
DAEMONS="@acpid syslog-ng network rpcbind dbus hal @netfs @crond @alsa bluetooth PS3Init CaroloSoftware"
TARGET_REPOS="carolo core extra community"
TARGET_GROUPS="base"
TARGET_PACKAGES="openssh netcfg hal acpi acpid rpcbind alsa-lib alsa-utils alsa-oss gcc sdl sdl_mixer libmikmod libmad audiofile boost carolo/libtremor-svn carolo/libftd2xx carolo/bluez-utils-sixaxis carolo/bluez-libs"
# you can optionally also override some functions...
worker_intro () {
infofy "Herzlich Willkommen beim automatischen Installationsprozess zur Archlinux Installation für das Carolo DHBW-System.\r\nACHTUNG: IM FOLGENDEN WIRD DIE GESAMTE FESTPLATTE (/DEV/SDA) FORMATIERT! SOLLTEN SIE DIES NICHT WÜNSCHEN, SO BRECHEN SIE NUN MIT STRG+C AB! ANDERNFALLS DRÜCKEN SIE BITTE DIE ENTER-TASTE, UM DAS SETUP ZU STARTEN!"
read -s
worker_configure_system () {
prefill_configs
sed -i 's/^HOSTNAME="myhost"/HOSTNAME="caroloDHBW"/' $var_TARGET_DIR/etc/rc.conf
sed -i 's/^LOCALE="en_US/LOCALE="de_DE/' $var_TARGET_DIR/etc/rc.conf
sed -i 's/^KEYMAP="en"/KEYMAP="de"/' $var_TARGET_DIR/etc/rc.conf
# These variables are mandatory
GRUB_DEVICE=/dev/sda
PARTITIONS='/dev/sda 100:ext2:+ 2048:swap *:ext4'
BLOCKDATA='/dev/sda1 raw no_label ext2;yes;/boot;target;no_opts;no_label;no_params
/dev/sda2 raw no_label swap;yes;no_mountpoint;target;no_opts;no_label;no_params
/dev/sda3 raw no_label ext4;yes;/;target;no_opts;no_label;no_params'
</code>
The installation crashes with the following message:
<quote>
error: 'carolo/libtremor-svn': no such repository
error: repository 'carolo' not found
</quote>
Maybe someone did solve the problem before.
Thanks!
Regards Dustin

EDIT: crap. sorry I misread
check if the iso has a carolo directory/file in /src/core/pkg (just like there should be one for core etc)
initial solution to what I just found out was not really your question below:
dronox wrote:<code>
SOURCE=cd
FILE_URL=file:///src/core/pkg
TARGET_REPOS="carolo core extra community"
</code>
you're mixing up repos with mirrors (or maybe I just didn't pick the names of the variables careful enough).
what you have configured here, is to use /src/core/pkg as mirror (just like you have archlinux.org mirror and many more), and to enable the core, extra, community and carolo repositories on it.
but obviously, there is no 'carolo' repository on the official install image (just like there is no carolo repository on any of the official archlinux mirrors).
what you probably want to do, is something like:
SOURCE=net
SYNC_URL=http://192.168.1.1 # your own personal mirror here
TARGET_REPOS="carolo core extra community"
this way it will use *your* mirror which has all the listed repositories.
good luck!
Last edited by Dieter@be (2009-11-20 21:09:01)

Localized string not found & menu will not display in Vista

I have had an issue since late version 3 on my Vista Home Premium PC, when I installed a new copy and started seeing no menu, and the bookmarks and right-clicks respond with "Localized string not found..."
I have tried the cleanup in a previous message in this forum - to delete the safari folders c:\users\xxx\appdata\Local\ - once I reinstall the current version, I have the same issue. I see the previous query was closed, or I would have replied to that.
I am testing software for a web-based application, and we support Safari, so this is pretty important that we solve this - though I would be happy as a clam to drop support for Safari on the PC - that likely isn't going to happen. I have had no such issues on my G4 running OSX 10.4.

Thanks!
Okay ... I suspect that one of the en.lproj folders (English language resource files) for your Safari or your Apple Application Support has been blown up. So we'll try swapping out both your Safari and your Apple Application Support, taking a few other explicit precautions along the way, just in case. Best to print out a copy of these instructions, because at one stage of proceedings you won't be able to use a web browser.
First download and save a copy of the SafariSetup.exe (installer file) from the Apple Website. Don't run the install online and don't start the install from the SafariSetup.exe just yet.
http://www.apple.com/safari/download/
Quit iTunes and/or QuickTime if you have them installed and running. (They both use Apple Application Support and can interefere with the Apple Application Support uninstall if you have them running.
Now head into your "Uninstall a program" control panel. Uninstall safari. Uninstall Apple Application Support.
(If you get any error messages during the uninstalls, halt proceedings and post back to let us know what they say. Precise text, please.)
Next, we'll clear away any leftover program folders and files.
Go "Start > Computer".
In "Computer", open "Local Disk C:" or whichever drive your program files are installed on.
Open the "Program files" folder.
Right-click on the "Safari" folder (if it still exists) and select "Delete".
Open the "Common Files" folder.
Open the "Apple" folder.
Right-click on the "Apple Application Support" folder (if it still exists) and select "Delete".
Empty your recycle bin and restart the PC. (If iTunes is installed on the PC, you'll probably receive a message at this stage saying that iTunes will not run because Apple Application Support is missing. Click through the message.)
(If you get any error messages during the program files/folders deletions, halt proceedings and post back to let us know what they say. Precise text, please.)
After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now shut down all your security software (firewall, antivirus, antispyware).
Now start the Safari reinstall by doubleclicking the SafariSetup.exe you downloaded earlier. (This should also reinstall Apple Application Support.)
Reenable all security software prior to reconnecting to your network and/or the internet.
Did the reinstall go through okay? If so, do you have your Safari right-click contextual menus back again?

Rescue and Recovery 4.5: Boot Environment does not list Backups on USB Drive

Hello,
I have a fresh installed Windows 7 on a X 230 and am now setting up my backup. The notebook came without an OS so I installed Win7, all drivers and the Thinkvantage Software myself. Then I made a backup with Rescue and Recovery 4.5 to an external USB 3.0 HDD. The Backup is listed in the Windows program, but when I boot to Rescue and Recovery, the backup is not listed.
Since there arent any options I could change during the backup or the recovery, I have no idea what went wrong..
Thanks!

In the standalone boot of RNR, go to the advanced GUI, chose Restore. After a few screens, you will see a restore from location, default is Local Hard drive. This is a drop down list. USB option is available in the drop down list. The USB must be connected during the standalone boot. If the backup is NOT the same UUID as your system, check the box that says show backups from all systems.
Also read my post dated Nov 22,2011 . RNR backup reverts to local. This may not apply to USB backups.

How do i uninstall software not listed anyplace?

I've tried to install hp solution center which can't locate hpzmsi01.exe file and did a level 4 uninstall which left hp photosmart installed hp update installed, with absolutely no way to uninstall, windows 7 64bit c7280. the windows 7 disk that came with the printer doesn't allow anyway to access files on the disk. and actually before i did the level 4 uninstall hp update and hp photosmart still were not listed in any place to uninstall. i have had hp printers since 1995 and always a problem with drivers and software and auto update should not be allowed unless admin privileges have been give this is were problem all started. thanks for any help

Hi,
Download and install Revo Uninstaller from the link below.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect your printer from your PC.
Run revo to see if it finds the software you wish to uninstall. Right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left over files and folders. Once the uninstall has completed, reboot the PC.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Smartwatch 2 NOT listed in SUS software

I have just installed this software & am trying to update my smartwatch 2 firmware - BUT this is not listed in the devices (the smartwatch is shown BUT NOT smartwatch 2). How do I get this to appear ?
Solved!
Go to Solution.

SW2 is no longer supported by SUS.
I suggest that you do the firmware update via the phone application instead. In the SW2 application you can search for new updates.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How do I uninstall PSE 12. It is not listed in Windows control panel. I have PSE 13

How do I uninstall PSE 12. It is not listed in the control panel ow Windows 7. I have upgraded to PSE 13, and it IS listed in the control panel.

Hi,
If you are not able to uninstall the software in the usual way from Programs and Features, you could try a third party uninstaller such as the application detailed below.
Download and install the free version of Revo Uninstaller from the link below.
http://www.revouninstaller.com/download-freeware-version.php
Run revo and see if this detects the installation. If it does, right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left-over files and folders. Once the uninstall has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

[SOLVED] Local Hosting Using a Dynamic DNS

I've been trying to self host a domain to use owncloud with, through www.mydomainname/owncloud.com or something similar. I've gotten a LAMP set up with a virtual host, have signed up with https://freedns.afraid.org/, set the afraid nameservers, set my IP as an A record through my domain provider and have tried to install a dynamic DNS client on my server computer, though I have not gotten successful results. On my LAMP I've set a virtual host for my domain and I've been able to connect to it locally but not outside of my network. I was able to ping my domain that would in result ping my home IP address but now I get an unknown host. I've also tried to set up my DDWRT router with the provided dyndns. At this point I'm not sure what I'm doing incorrectly.
Another issue I've been having has been finding a working dyndns client, afraid-dyndns-uv from the AUR gives me a hash error, and the only promising client I've been able to find is freedns-afraid, but it's an RPM package and I don't know how to make use of the files in the tarball.
I can provide any needed configs, though I don't think that a config would be an error as I've been able to start up my httpd service and connect to it locally perfectly fine. I would greatly appreciate any help c:
Last edited by 0X1A (2013-06-16 20:19:10)

0X1A wrote:Alright, so the problem with not being able to ping my IP again was with my registrar nameservers, I had to remove the provided nameservers from them and only use the afraid ones. Now I can ping my IP address but I still can't connect to my domain through my LAMP so now I'm guessing it's either a port forwarding issue or a issue with my apache configuration. What exactly should I have on my httpd conf? I have the ServerName set to my domain name, is there something I'm missing?
My "ServerName" isn't set to anything particularly special. It's "archsystem:80", which is what I call my computer locally. Here's the entire file for reference:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName archsystem:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/home/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/home/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride All
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Use for PHP 5.x:
AddHandler php5-script php
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# PHP
Include conf/extra/php5_module.conf
# phpMyAdmin
Include conf/extra/httpd-phpmyadmin.conf
# General shared files
Include conf/extra/httpd-drcouzelis.conf
# Angela's files
Include conf/extra/httpd-angela.conf
I'm sorry, I'm having a really hard time understanding the terminology you're using (maybe because I'm just not educated enough). Even so, I'll look into what else might be the problem...

Group Added With dscl Command Not Listed In Account Prefs

I added groups for each user per article 307128 using the dscl command:
sudo dscl . create /Groups/username GroupMembership username
sudo dscl . change /Groups/username RecordName username _username
But these new groups are not listed by the Account preferences on my new MacBook. They are listed on my iMac G4. Both machines are running 10.5.2. The accounts on the new MacBook were migrated from the iMac.
A dscl list shows that the groups are defined:
sudo dscl . list /Groups
And when I try to add a new group called _username with Account preferences I get an error saying the name is in use.
Any idea how to get Account preferences to show these groups?
Thanks.

ovithucu, in your contacts app, swipe down from the top bezel to Settings.
In the list of "Show Account in Contacts List", turn OFF each account shown, leaving none ON.
Tap the lower left BACK button.
Now, back in the main Contacts view, drag down on the screen to see the total number of contacts, what number is there?
Those are you "Local" contacts, stored locally in the device memory. Those can be cleared if you want, and start all over again.
Also, check your gmail account on a PC, login and see how many contacts you have in gmail which should be sycning to the device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[solved] local repo not listed during -Sy

Similar Messages

Maybe you are looking for