[SOLVED] m_sensors can't detect the chipset so I can't set up my fans

I have overheating problems with my Latitude E5520
(to be exact: http://www.dell.com/support/troubleshoo … ag/50GBMQ1)
so I wanted to see what my fans are doing;
I went through https://wiki.archlinux.org/index.php/Lm_sensors
and then through https://wiki.archlinux.org/index.php/Fan_Speed_Control
and I had to stop at "The first line of the sensors output is the chipset your motherboard uses to read the speeds, temperatures, and voltages.".
My output:
[sms@sms ~]$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +25.0°C  (crit = +107.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +66.0°C  (high = +86.0°C, crit = +100.0°C)
Core 0:         +66.0°C  (high = +86.0°C, crit = +100.0°C)
Core 1:         +62.0°C  (high = +86.0°C, crit = +100.0°C)
is telling me nothing: I bet my chipset is not called "coretemp-isa-0000"...
Last edited by smsware (2013-02-08 00:15:13)

smsware wrote:
I have overheating problems with my Latitude E5520
(to be exact: http://www.dell.com/support/troubleshoo … ag/50GBMQ1)
so I wanted to see what my fans are doing;
I went through https://wiki.archlinux.org/index.php/Lm_sensors
and then through https://wiki.archlinux.org/index.php/Fan_Speed_Control
and I had to stop at "The first line of the sensors output is the chipset your motherboard uses to read the speeds, temperatures, and voltages.".
My output:
[sms@sms ~]$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +25.0°C  (crit = +107.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +66.0°C  (high = +86.0°C, crit = +100.0°C)
Core 0:         +66.0°C  (high = +86.0°C, crit = +100.0°C)
Core 1:         +62.0°C  (high = +86.0°C, crit = +100.0°C)
is telling me nothing: I bet my chipset is not called "coretemp-isa-0000"...
I realize it doesn't seem to mean anything, but my sensor gives the same name and I'm running an i7 sandybridge, so I don't think it is a mistake.  From what I've read, it is just listing the sensors it finds, starting with zero.  Subsequent sensors, if they were found, would be listed coretemp-isa-0001, coretemp-isa-0002, etc.

Similar Messages

  • My macbook pro can't detect the NAS after the NAS reboot.

    After I reboot the QNAP NAS, my macbook pro can't detect the NAS. I can't find the NAS drives in Finder even I input the new IP address. I remember my macbook pro was able to detect the NAS automatically before. Please help.

    Jp150981 wrote:
    . is the disk dying? should i just change it?
    Yes.  If you have a non retina MBP, look at some options listed here:
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Ciao.

  • My 2 notebooks running XP will no longer detect the BEFW11S4 WAP, what can I do?

    My 2 notebooks running XP will no longer detect the BEFW11S4 WAP, what can I do?
    The connections just stopped yesterday. Both laptops work OK when connected by ethernet cables and my main PC running XP64 connected also by ethernet is not affected.
    Both laptops can see my neighbour's wireless network and worked OK with my son-in-laws network last night when I took them over to his house.
    Can I assume that the "wireless component has died?
    Any recommendations for a direct updated replacement?
    I'm currently connected to NTL broadband but may at sometime switch to Sky broadband in the future but I understand that I would not be able to do this with my NTL phone line.

    Thanks for the comments Charrie21,
    SSID Broadcast is enabled,
    Of the 3 leds on the front left:
    WLAN ACT is not illuminated
    WLAN Link is illuminated [According to the instruction because it is connected to a cable modem],
    POWER is illuminated.
    Of the 3 leds on the front right:
    LINK is illuminated,
    ACT is not illuminated,
    Diag in not illuminated.
    The router has been reset  several times.
    SSID has been changed several times
    Channel number has been changed several times
    WAP was previously 64BIt and has been changed to 128Bit
    Firmware version is the same date as currently on the Linksys web sute for this model.
    I am thinking the "wireless" component is dead.

  • I Tune can't detect the Phone

    Recently I have resored Every thing enternally in phone. After that the phone only got charging not starting only shows the apple logo...even  itune can't detect the phone...so what should i do?....howi recover it?

    Put the device in DFU mode (google it) and restore as new via iTunes.

  • WRT54GS Can not detect the router

    We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router.  I am using the router to access the internet and it can't be detected???
    I have powered it off enough times and then some and need to get this running to use the laptops.
    I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
    Thanks

    okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

  • I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too.

    I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too. i've done everything on the hp website to fix it (reinstall the driver, etc.), but nothing seems to help.  can anybody help me with my problem? thanks!

    When you say DVD drive is not working and cant detect disks, Is the Optical drive listed in Device manager and My computer? Is not reading any specific disks or all kinds of disks ?
    Also have you tried all possible troubleshooting steps found over here
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • How can i detect the windows version

    Hi,
    How can I detect the windows version from Forms 6i?
    I was used get_application_property(operating_system); But it only return MSWINDOWS, MSWINDOWS32, WIN32COMMON.
    Any function or way can return the exact windows version(98/ME/NT/XP)?
    Regards, Wing

    You may use Win_Api_Environment API call to get windows version.
    I have sample code on my home PC if you need code send mail at [email protected]

  • How can I detect the lable of CD or hard drive?

    hi all
    How can I detect the lable of CD or hard drive?
    thanx ;)

    Hi,
    Not to my knowmledge... you must use JNI to access the OS methods for that.
    JRG

  • HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED  IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

    HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED  IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

    sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think  i need to unlock again if i want to use sim other then att right ? pls reply me in details asap

  • How can I detect the PC show down event?

    I want to save a file to a certain destination once the PC shut down event happened.
    And the save process must be proceeded prior to the PC shutdown.
    How can I detect the PC shut down event?

    Hi there
    Try the "Application Instance Close?" Event.
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • How can I detect the vertices of a rectangle in my image ?

    I have applied a gradientMagnitude operator to my Image, and now I can see the shape of a rectangle with also other lines.
    How can I detect the vertices of the rectangle in my image?
    thank you

    Right mouse click the song and select "Get Info", go to option tab and check both Start Time and Stop Time.  Type in the Start and Stop time then click OK

  • I can detect other network except for my own network, weird thing is I alone can't detect the rest can

    I can detect other network except for my own network, weird thing is I alone can't detect the rest can. I can see all my friends networks and connect to them, but I cant see mine.

    Try to re-position the router or your computer.

  • Why is the BIOS can't detect the HDs installed on IDE3 or IDE4 automat

    Why is the BIOS can't detect the HDs installed on IDE3 or IDE4 automatically?
    Theoretically, BIOS is supposed to be able to automaticaly detect all HDs on the IDE interface, including RAID, isn't it?
    From Windows, I can find my SCSI interface is enabled indeed, but not finding my HD on it.
    Besides, if I need to make RAID0-1 by software, then I prefer to install them by Windows 2000.
    Why bother to install another software?
    I think the performance of RAID installed by the software is quite inferior than the one installed by the hardware.
    Therefore, I don't think MSI will design some function like that.
    What's more,  While rebooting process, I press the CTRL+F, trying to get into the RAID BIOS, but nothing happened.
    Is it possible that the BIOS is crashed?  ?(

    The chip for the raid controller supplies its own bios for IDE3 and IDE4.  The only thing the main bios has to do with that part is enabling raid controller.  During boot does the screen ask you to press CTRL+F.

  • TS1702 help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

    help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

    Hi melbernai - not sure if you've solved this problem yet. I had the exact same problem recently with my 2nd Gen iPod Nano. I solved it yesterday by simply updating iTunes to the most recent version, after which I could get rid of the register screen. The only other thing I needed to do to add my custom playlists was select "Manually manage music" on the screen for my iPod, since it had been in an automatic synching mode since the problem occurred.

  • Can I edit the size of my photo when setting up an email signature?

    Can I edit the size of my photo when setting up an email signature?

    Not sure what you mean by "photo screen?" Do you mean your Photo Stream?
    In the Photos app there are several ways to view the photos. Tap on Albums. Your Photo Stream is one Album but there may be others including the Camera Roll, albums made on the iPad with photos from the Camera Roll, and albums of photos copied to your iPhone by syncing with your computer.
    To remove albums from the Camera Roll, tap on the Camera Roll album to see the small thumbnails of the photos there. Tap on Select, tap on the photos to delete, then tap on the trashcan. The photos will then be moved to another album called Recently Deleted. They remain there for 30 days to allow you time to reconsider whether you really want to delete them or not. After 30 days they will automatically be deleted from your iPhone. But if you are sure you want the photos deleted from your iPhone delete them again from the Recently Deleted album.
    Albums created on the iPad with photos from the Camera Roll can be deleted in the same way.
    To delete albums copied to your iPhone by syncing with your computer running iTunes are deleted by doing another sync. But before you click on Sync deselect the albums in iTunes. Then when you click on Apply or Sync the albums will be removed from your iPhone but they will remain on your computer.

Maybe you are looking for