[SOLVED] networkmanager.service and accounts-daemon.service take slow
Hello everyone!
I have noticed that my laptop booting is slow, then I read the wiki and google around but there seems no answer for me.
It seems that this all because of the NetworkManager, so I post it here.
This is my basic information:
$ uname -a [3:03:07]
Linux hp 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64 GNU/Linux
And
$ systemd-analyze [3:04:25]
Startup finished in 3.363s (firmware) + 1.382s (loader) + 2.824s (kernel) + 24.506s (userspace) = 32.077s
And
$ systemd-analyze blame [3:04:12]
13.456s NetworkManager.service
11.414s accounts-daemon.service
3.289s libvirtd.service
2.205s gdm.service
1.094s polkit.service
1.048s systemd-vconsole-setup.service
981ms wpa_supplicant.service
958ms alsa-restore.service
852ms boot.mount
636ms systemd-remount-fs.service
634ms sys-kernel-debug.mount
609ms dev-hugepages.mount
569ms sys-kernel-config.mount
520ms dev-mqueue.mount
508ms systemd-tmpfiles-setup-dev.service
506ms tmp.mount
476ms systemd-udev-trigger.service
420ms systemd-journal-flush.service
358ms kmod-static-nodes.service
268ms systemd-timesyncd.service
260ms colord.service
240ms systemd-backlight@backlight:intel_backlight.service
236ms systemd-update-utmp.service
And
$ systemd-analyze critical-chain [3:07:05]
graphical.target @24.506s
└─multi-user.target @24.506s
└─libvirtd.service @21.216s +3.289s
└─network.target @21.142s
└─NetworkManager.service @7.685s +13.456s
└─basic.target @7.684s
└─timers.target @7.683s
└─systemd-tmpfiles-clean.timer @7.683s
└─sysinit.target @7.652s
└─swap.target @7.652s
└─dev-disk-by\x2duuid-7006949a\x2d4625\x2d4d7e\x2db101\x2dbe714c525296.swap @7.458s +191ms
└─dev-disk-by\x2duuid-7006949a\x2d4625\x2d4d7e\x2db101\x2dbe714c525296.device @7.457s
And
$ journalctl _SYSTEMD_UNIT=accounts-daemon.service
8月 24 02:49:20 hp accounts-daemon[264]: started daemon version 0.6.37
And
$ journalctl _SYSTEMD_UNIT=NetworkManager.service [3:04:39]
8月 24 02:49:12 hp NetworkManager[258]: <info> NetworkManager (version 0.9.10.1) is starting...
8月 24 02:49:12 hp NetworkManager[258]: <info> Read config: /etc/NetworkManager/NetworkManager.conf
8月 24 02:49:12 hp NetworkManager[258]: <info> WEXT support is enabled
8月 24 02:49:12 hp NetworkManager[258]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
8月 24 02:49:20 hp NetworkManager[258]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc. To report bugs please use the Netw
8月 24 02:49:20 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/TP-LINK_5D05CE
8月 24 02:49:20 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/TP-LINK_5D05CE 1
8月 24 02:49:20 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/TP-LINK_1244B0 1
8月 24 02:49:20 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/TP-LINK_1244B0
8月 24 02:49:20 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/9
8月 24 02:49:21 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/UCWiFi-77777
8月 24 02:49:21 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/130
8月 24 02:49:21 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/yangmafu
8月 24 02:49:21 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/Hotspot
8月 24 02:49:21 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/TP-LINK_281E42
8月 24 02:49:21 hp NetworkManager[258]: <info> new connection /etc/NetworkManager/system-connections/NewStar
8月 24 02:49:21 hp NetworkManager[258]: <info> monitoring kernel firmware directory '/usr/lib/firmware'.
8月 24 02:49:21 hp NetworkManager[258]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.0/0000:07:00
8月 24 02:49:21 hp NetworkManager[258]: <info> WiFi hardware radio set enabled
8月 24 02:49:21 hp NetworkManager[258]: <info> WWAN hardware radio set enabled
8月 24 02:49:21 hp NetworkManager[258]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-adsl.so
8月 24 02:49:21 hp NetworkManager[258]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wifi.so
8月 24 02:49:21 hp NetworkManager[258]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wwan.so
8月 24 02:49:21 hp NetworkManager[258]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
8月 24 02:49:21 hp NetworkManager[258]: <info> WiFi enabled by radio killswitch; enabled by state file
8月 24 02:49:21 hp NetworkManager[258]: <info> WWAN enabled by radio killswitch; enabled by state file
8月 24 02:49:21 hp NetworkManager[258]: <info> WiMAX enabled by radio killswitch; enabled by state file
8月 24 02:49:21 hp NetworkManager[258]: <info> Networking is enabled by state file
8月 24 02:49:21 hp NetworkManager[258]: <info> (lo): link connected
8月 24 02:49:21 hp NetworkManager[258]: <info> (lo): carrier is ON
8月 24 02:49:21 hp NetworkManager[258]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
8月 24 02:49:21 hp NetworkManager[258]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): carrier is OFF
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): new Ethernet device (driver: 'r8169' ifindex: 2)
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): exported as /org/freedesktop/NetworkManager/Devices/1
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): preparing device
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): created default wired connection 'Wired connection 1'
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): using nl80211 for WiFi device control
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): driver supports Access Point (AP) mode
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): new 802.11 WiFi device (driver: 'rt2800pci' ifindex: 3)
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): exported as /org/freedesktop/NetworkManager/Devices/2
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): preparing device
8月 24 02:49:23 hp NetworkManager[258]: <info> wpa_supplicant started
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1) supports 4 scan SSIDs
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: starting -> ready
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1): device state change: unavailable -> disconnected (reason 'supplicant-available')
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: ready -> disconnected
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1) supports 4 scan SSIDs
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: disconnected -> inactive
8月 24 02:49:25 hp NetworkManager[258]: <info> Auto-activating connection 'NewStar'.
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) scheduled...
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) started...
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
8月 24 02:49:25 hp NetworkManager[258]: <info> NetworkManager state is now CONNECTING
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 2 of 5 (Device Configure) scheduled...
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) complete.
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 2 of 5 (Device Configure) starting...
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): device state change: prepare -> config (reason 'none') [40 50 0]
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1/wireless): connection 'NewStar' has security, and secrets exist. No ne
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): exported as /org/freedesktop/NetworkManager/Devices/1
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): preparing device
8月 24 02:49:22 hp NetworkManager[258]: <info> (eno1): created default wired connection 'Wired connection 1'
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): using nl80211 for WiFi device control
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): driver supports Access Point (AP) mode
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): new 802.11 WiFi device (driver: 'rt2800pci' ifindex: 3)
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): exported as /org/freedesktop/NetworkManager/Devices/2
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
8月 24 02:49:22 hp NetworkManager[258]: <info> (wlo1): preparing device
8月 24 02:49:23 hp NetworkManager[258]: <info> wpa_supplicant started
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1) supports 4 scan SSIDs
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: starting -> ready
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1): device state change: unavailable -> disconnected (reason 'supplicant-available')
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: ready -> disconnected
8月 24 02:49:23 hp NetworkManager[258]: <info> (wlo1) supports 4 scan SSIDs
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: disconnected -> inactive
8月 24 02:49:25 hp NetworkManager[258]: <info> Auto-activating connection 'NewStar'.
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) starting connection 'NewStar'
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) scheduled...
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) started...
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
8月 24 02:49:25 hp NetworkManager[258]: <info> NetworkManager state is now CONNECTING
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 2 of 5 (Device Configure) scheduled...
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) complete.
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 2 of 5 (Device Configure) starting...
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): device state change: prepare -> config (reason 'none') [40 50 0]
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1/wireless): connection 'NewStar' has security, and secrets exist. No ne
8月 24 02:49:25 hp NetworkManager[258]: <info> Config: added 'ssid' value 'NewStar'
8月 24 02:49:25 hp NetworkManager[258]: <info> Config: added 'scan_ssid' value '1'
8月 24 02:49:25 hp NetworkManager[258]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
8月 24 02:49:25 hp NetworkManager[258]: <info> Config: added 'auth_alg' value 'OPEN'
8月 24 02:49:25 hp NetworkManager[258]: <info> Config: added 'psk' value '<omitted>'
8月 24 02:49:25 hp NetworkManager[258]: <info> Activation (wlo1) Stage 2 of 5 (Device Configure) complete.
8月 24 02:49:25 hp NetworkManager[258]: <info> Config: set interface ap_scan to 1
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: inactive -> authenticating
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: authenticating -> associating
8月 24 02:49:25 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: associating -> associated
8月 24 02:49:26 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: associated -> 4-way handshake
8月 24 02:49:26 hp NetworkManager[258]: <info> (wlo1): supplicant interface state: 4-way handshake -> completed
8月 24 02:49:26 hp NetworkManager[258]: <info> Activation (wlo1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wir
8月 24 02:49:26 hp NetworkManager[258]: <info> Activation (wlo1) Stage 3 of 5 (IP Configure Start) scheduled.
8月 24 02:49:26 hp NetworkManager[258]: <info> Activation (wlo1) Stage 3 of 5 (IP Configure Start) started...
8月 24 02:49:26 hp NetworkManager[258]: <info> (wlo1): device state change: config -> ip-config (reason 'none') [50 70 0]
8月 24 02:49:26 hp NetworkManager[258]: <info> Activation (wlo1) Beginning DHCPv4 transaction (timeout in 45 seconds)
8月 24 02:49:27 hp NetworkManager[258]: <info> dhcpcd started with pid 346
8月 24 02:49:27 hp NetworkManager[258]: <info> Activation (wlo1) Stage 3 of 5 (IP Configure Start) complete.
8月 24 02:49:27 hp dhcpcd[346]: version 6.4.3 starting
8月 24 02:49:27 hp NetworkManager[258]: <info> (wlo1): DHCPv4 state changed nbi -> preinit
8月 24 02:49:27 hp dhcpcd[346]: DUID 00:01:00:01:1b:84:72:e9:b8:76:3f:39:7c:5b
8月 24 02:49:27 hp dhcpcd[346]: wlo1: IAID 3f:39:7c:5b
8月 24 02:49:27 hp dhcpcd[346]: wlo1: soliciting an IPv6 router
8月 24 02:49:28 hp NetworkManager[258]: dhcpcd[346]: version 6.4.3 starting
8月 24 02:49:28 hp NetworkManager[258]: dhcpcd[346]: DUID 00:01:00:01:1b:84:72:e9:b8:76:3f:39:7c:5b
8月 24 02:49:28 hp NetworkManager[258]: dhcpcd[346]: wlo1: IAID 3f:39:7c:5b
8月 24 02:49:28 hp NetworkManager[258]: dhcpcd[346]: wlo1: soliciting an IPv6 router
8月 24 02:49:28 hp dhcpcd[346]: wlo1: rebinding lease of 192.168.1.100
8月 24 02:49:28 hp NetworkManager[258]: dhcpcd[346]: wlo1: rebinding lease of 192.168.1.100
8月 24 02:49:28 hp NetworkManager[258]: <info> (virbr0): carrier is OFF
8月 24 02:49:28 hp NetworkManager[258]: <info> (virbr0): new Bridge device (driver: 'bridge' ifindex: 4)
8月 24 02:49:28 hp NetworkManager[258]: <info> (virbr0): exported as /org/freedesktop/NetworkManager/Devices/3
8月 24 02:49:28 hp NetworkManager[258]: <info> (virbr0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
8月 24 02:49:28 hp NetworkManager[258]: <info> (virbr0): preparing device
8月 24 02:49:28 hp NetworkManager[258]: <info> (virbr0): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
8月 24 02:49:32 hp dhcpcd[346]: wlo1: leased 192.168.1.100 for 7200 seconds
8月 24 02:49:32 hp dhcpcd[346]: wlo1: adding route to 192.168.1.0/24
8月 24 02:49:32 hp NetworkManager[258]: dhcpcd[346]: wlo1: leased 192.168.1.100 for 7200 seconds
8月 24 02:49:32 hp NetworkManager[258]: dhcpcd[346]: wlo1: adding route to 192.168.1.0/24
8月 24 02:49:33 hp NetworkManager[258]: <info> (wlo1): DHCPv4 state changed preinit -> reboot
8月 24 02:49:33 hp NetworkManager[258]: <info> address 192.168.1.100
8月 24 02:49:33 hp NetworkManager[258]: <info> plen 24 (255.255.255.0)
8月 24 02:49:33 hp NetworkManager[258]: <info> gateway 192.168.1.1
8月 24 02:49:33 hp NetworkManager[258]: <info> server identifier 192.168.1.1
8月 24 02:49:33 hp NetworkManager[258]: <info> lease time 7200
8月 24 02:49:33 hp NetworkManager[258]: <info> nameserver '192.168.1.1'
8月 24 02:49:33 hp NetworkManager[258]: nm_ip4_config_add_nameserver: assertion 'new != 0' failed
8月 24 02:49:33 hp NetworkManager[258]: <info> nameserver '0.0.0.0'
8月 24 02:49:33 hp NetworkManager[258]: <info> Activation (wlo1) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
8月 24 02:49:33 hp NetworkManager[258]: <info> Activation (wlo1) Stage 5 of 5 (IPv4 Commit) started...
8月 24 02:49:33 hp NetworkManager[258]: <info> (wlo1): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
8月 24 02:49:33 hp NetworkManager[258]: <info> Activation (wlo1) Stage 5 of 5 (IPv4 Commit) complete.
8月 24 02:49:33 hp NetworkManager[258]: <info> (wlo1): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
8月 24 02:49:33 hp NetworkManager[258]: <info> (wlo1): device state change: secondaries -> activated (reason 'none') [90 100 0]
8月 24 02:49:33 hp NetworkManager[258]: <info> NetworkManager state is now CONNECTED_LOCAL
8月 24 02:49:34 hp NetworkManager[258]: <info> NetworkManager state is now CONNECTED_GLOBAL
8月 24 02:49:34 hp NetworkManager[258]: <info> Policy set 'NewStar' (wlo1) as default for IPv4 routing and DNS.
8月 24 02:49:34 hp NetworkManager[258]: <info> Writing DNS information to /usr/bin/resolvconf
8月 24 02:49:35 hp NetworkManager[258]: <info> Activation (wlo1) successful, device activated.
8月 24 02:49:35 hp NetworkManager[258]: <info> startup complete
8月 24 02:49:40 hp dhcpcd[346]: wlo1: no IPv6 Routers available
8月 24 02:49:40 hp NetworkManager[258]: dhcpcd[346]: wlo1: no IPv6 Routers available
Last edited by callofdutyops (2014-08-26 14:48:22)
ooo wrote:
callofdutyops wrote:But I wonder whether there's some improvement?
Do you mean why there's an improvement after removing the journal files?
first of all, I hope that you know what systemd journal is, and what files you just deleted.
systemd journal stores all system logs in database files in /var/log/journal/
every time you boot up your system, journald will log the entire boot process and stores in its database (and continue logging of course).
over time the journal will get huge (unless you limit its size) and fragmented, which could slow down reading and writing from the it greatly.
so, if writing the log during the boot process slows down greatly, it will certainly have an detrimental effect on overall boot speed.
I hope that makes sense
I think I saw this mentioned on some systemd TODO list, so developers should aware of this and possibly trying to figure out some workaround.
In the meantime limiting journal size is probably a good idea.
If you happened to be using btrfs, disabling COW for files in /var/log/journal and 'autodefrag' mount option may also help some.
also defragmenting the files in /var/log/journal if your file system supports it
First of all, thanks to your very clear explanation!
English is not my mother tongue, so I think I express me in a wrong way.Sorry for this!
What I exactly want to mean is that is it possible to make booting more faster?
Similar Messages
-
Using BAPI_PO_CREATE1 : Linking service, and account assignment
Hello,
I have trouble when using BAPI_PO_CREATE1. When creating PO using BAPI_PO_CREATE1, I need to input service for each po item and the service itself need to have account assignment. I simplify the code below.
**PO item
t_poitem-po_item = '10'. "for item 10
t_poitem-PCKG_NO = '20'. "link with service
t_poitemx-po_item = 'X'.
t_poitemx-PCKG_NO = 'X'.
**Account Assignment
t_poaccount-po_item = '10'. "link with PO Item
t_poaccount-SERIAL_NO = '01'.
t_poaccount-DISTR_PERC = 1.
t_poaccountx-po_item = '10'.
t_poaccountx-SERIAL_NO = '01'.
t_poaccountx-po_itemx = 'X'.
t_poaccountx-SERIAL_NOx = 'X'.
t_poaccountx-DISTR_PERC = 'X'.
**PO Services
**1st row
t_poservices-PCKG_NO = '20'.
t_poservices-LINE_NO = '0000000001'.
t_poservices-SUBPCKG_NO = '21'.
APPEND t_poservices.
clear t_poservices.
**2nd row
t_poservices-PCKG_NO = '21'.
t_poservices-LINE_NO = '0000000002'.
t_poservices-EXT_LINE = '0000000010'.
**fill account assignment for services
t_POSRVACCESSVALUES-pckg_no = '21'.
t_POSRVACCESSVALUES-LINE_NO = '0000000002'.
T_POSRVACCESSVALUES-SERNO_LINE = '01'.
t_POSRVACCESSVALUES-SERIAL_NO = '01'. "acct. assign. link
t_POSRVACCESSVALUES-PERCENTAGE = '100'.
Every time i execute BAPI_PO_CREATE1 using entry similar like above, i always found error message in t_return like this:
No account assignment exists for service line 0000000010
I feel sure that i have fill every field needed to link services and account assignment which is using serial_no, but somehow it does not link correctly. Can anyone advise me if there is some thing missing or incorrect with my ABAP code above? Thank you in advance for your help. For sure, first helpful answer will receive my rewards point.
Regards,
AbrahamThank you for the code. Actually i have fill the required field as you told but i did not put it in my code here to focus the problem on service and account assignment. After checking out your code, i found that the different between your code and mine is in services table.
<u><b>your code :</b></u>
<b>POSERVICES:structure</b>
PCKG_NO : 0000000001
LINE_NO :0000000001
SUBPCKG_NO : 0000000002
SERVICE :3000000000017
QUANTITY :5
BASE_UOM :AU
GR_PRICE :20000
<b>POSRVACCESSVALUES: structure name</b>
PCKG_NO :0000000002
LINE_NO :0000000002
<u><b>my code are:</b></u>
<b>POSERVICES:structure</b>
PCKG_NO : 0000000001
LINE_NO :0000000001
SUBPCKG_NO : 0000000002
PCKG_NO : 0000000002
LINE_NO :0000000002
SERVICE :3000000000017
QUANTITY :5
BASE_UOM :AU
GR_PRICE :20000
<b>POSRVACCESSVALUES: structure name</b>
PCKG_NO :0000000002
LINE_NO :0000000002
SERIAL_NO :0000000001
The other difference are in account assignment table, you didn't fill SERIAL_NO field.
my code will be like below:
<b>POACCOUNT: structure name</b>
PO_ITEM :10
SERIAL_NO : 0000000001
If using your version, the error message will be:
<i>In case of account assignment, please enter acc. assignment data for item</i>
If using my version, the error message will be:
<i>No account assignment exists for service line 0000000010</i>
Please advise what was wrong with my code. Thank you.
Regards,
Abraham -
My iPhone 4 cellphone was stolen last year. I have done all the procedures of reporting it to the South African Police Services and my Vodacom service provider. I do have the case number and I did blacklist my stolen phone. I have not had any assistance. I had installed Find My iPhone but did not have any iCloud account on it (ie. iCloud Username and Password). So I am unable to track it or find its location as yet. Please help me find my iPhone 4.
Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
If this does not work, you should get it serviced:
Apple - Support - Service Answer Center
How to back up your data and set up as a new device -
SQL server service and SQL agent service
Hi all. If I am going to use a Domain User to start SQl server service and SQL agent service,
does the domain user need to be SYSADMIN ????No. not at all required.
Service account should have below permissions to start SQL service and Agent services.
Log on as a service (SeServiceLogonRight)
Replace a process-level token (SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process (SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
Also please go though the below URL for more information:
http://msdn.microsoft.com/en-us/library/ms143504.aspx#Windows -
Hi
-when i install default instance MSSQLSERVER i added a domain account as a service account,
- when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
it thrown error
The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
but when i add domain\sqservice account in administrators group these services started,
1) here why this change behavior happened
2i changed the port 1500
adilHI
the sql instance service is running with domain/sqlservice account ,
- i stopped the sql service service
- when i start it not started again and i found below error message
Domain and account: MOJPORTAL\spsqlservice
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed,
check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7041</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
<EventRecordID>2177</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="4044" />
<Channel>System</Channel>
<Computer>PORTALSQL1.mojportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">MSSQL$xSQL</Data>
<Data Name="param2">xxxL\spsqlservice</Data>
</EventData>
</Event>
adil -
Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil LokaPlease try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response. -
Difference between a WEB service and a Enterprise Service?
Can Anybody explain me the difference between a WEB service and a Enterprise Service?
Hi Anilkumar K Naidu ,
Web service
A Web service is a self-contained, modularized functionality, which can be published, discovered, and accessed across a network using open standards and which is supported by SAP NetWeaver. Web services cover services provision for integration within an enterprise as well as cross enterprises on top of any communication technology stack, whether asynchronous or synchronous, in any format.
Web Services in the NetWeaver framework play an important role in facilitating the integration of disparate applications from various departments or trading partners and thus increasing business productivity. This benefit allows small and medium businesses also to integrate their business applications with larger trading partners. The benefit derived from this seamless integration introduces security concerns when all the business logic is now being exposed through a standard interface that is a catalyst for security vulnerabilities. SAP Security Managers must use automated diagnostics tools to ensure that the security vulnerabilities are caught in pre-production and in post-production phase.
Web Services Testing: SAP Netweaver Platform
http://www.crosschecknet.com/web_services_testing_SAP.php
How Web services play a key role on the SAP NetWeaver
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-500244687cbd30ffd
How to develop a Simple Web Service Application Using SAP NetWeaver Developer Studio & SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
How To... Set Up a Web-Service Related Scenario with SAP xi
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Enhancing Your Web Services with SAP Exchange Infrastructure
http://www.sappro.com/downloads/SAPXI.pdf
Web Services, Part XI: Consuming Multiple Web Services
http://www.webreference.com/js/column106/
Vulneribility assesment of SAP Web Services
http://www.crosschecknet.com/resources/white_papers/sap_va.pdf
Enterprise Service
Enterprise Service-Oriented Architecture (Enterprise SOA)
Enterprise SOA is a blueprint for an adaptable, flexible, and open IT architecture for developing services-based, enterprise-scale business solutions. With SAP NetWeaver as a technical foundation, enterprise SOA moves IT architectures to higher levels of adaptability and moves companies closer to the vision of real-time enterprises by elevating Web services to an enterprise level.
An enterprise service is typically a series of Web services combined with business logic that can be accessed and used repeatedly to support a particular business process. Aggregating Web services into business-level enterprise services provides a more meaningful foundation for the task of automating enterprise-scale business scenarios.
SAP Enterprise Services Architecture
http://en.wikipedia.org/wiki/SAP_Enterprise_Services_Architecture
ENTERPRISE SERVICEORIENTED ARCHITECTURE DESIGN, EVELOPMENT,AND DEPLOYMENT
http://download.sap.com/platform/esoa/brochures/download.epd?context=FB8D5E235B637255604CD1EDB755014400C523BC4E4632245A59C838A212B5F04C71A43F8B38FC591628F4C698D8CAA859405AA974284758
Enabling Enterprise Services
http://help.sap.com/saphelp_nw04s/helpdata/en/80/be7042f1e6d242e10000000a1550b0/content.htm
Enterprise Service-Oriented Architecture
https://www.sdn.sap.com/irj/sdn/enterprisesoa
Define Enterprise Services using the Enterprise Services Community
https://www.sdn.sap.com/irj/sdn/define-es
Enterprise service bus
http://en.wikipedia.org/wiki/Enterprise_service_bus
Enterprise Services Workplace
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/flddisplay.asp
cheers!
gyanaraj
****Pls reward points if u find this helpful -
Business Package for Student Self Service and Faculty Self Service in EHP3
Dear All,
Can you tell me what all business packages available to provide Student Self Service and Faculty Self Service in the portal.
I am using EHP3.
Please tell me the name of the business packages so that we can download and integrate in portal.
If possible please tell me what functionalities are provided for student and faculty as self service in EHP3.
I did not want to mention this, but I have to say that its really very important for me for one of big prospective customer. I have to show a demo for Student Portal (Student Self Service)and Teacher Portal (Faculty Self Service).
PLEASE HELP
Thanks and Regards
Sudhir GuptaDear Sudhir,
Please check installation guides and OSS notes on pre-requisites at: www.service.sap.com/erp-inst
Hope this will be helpful.
Regards
Vinod Kumar -
How to istall oracle forms service and oracle reports service and testing
How to istall oracle forms service and oracle reports service ?
and we can make test?How to istall oracle forms service and oracle reports service ?http://download.oracle.com/docs/cd/B19375_07/doc/frs/docs.htm
and we can make test?Once installed, there is a test program both for Forms and Reports... or you mean something else ? if so, please clarify. -
AT&T Lacking Basic Customer Service and Accountability
This details the worst customer service for a first time customer that I have ever experienced, attempting to use AT&T service. To sum up the details explained below, my first experience with AT&T service consisted of a supervisor in the support department being unwilling and unable to solve and correct an error caused by AT&T. This lack of service and empathy for a first-time customer ruined the opinion and reputation in the eyes of this young-professional who had planned to give years of business and compensation to their company as I have just bought my first home. I ordered AT&T Uverse Max at Best Buy (using their experience to choose the best provider). I received an email with my PIN number and a confirmation with the internet installation date and time. I did not receive any other calls or emails. The day of installation arrives on Sunday July 26, 2015 (the earliest appointment time, a week after placing the order). No AT&T representative showed up for service within the 2 hour time frame. I made a call to AT&T UVERSE customer service to check up on the status of my installation only to find the customer service department is closed on Sundays. I also made a call to Best Buy to try to obtain any information regarding when the service reps would be out to install the internet, only to be informed that AT&T is solely responsible. Even the Best Buy manager attempted to contact AT&T with no luck. Only after contacting AT&T UVERSE technical support did I get to speak to a human person for 30 minutes. After being transferred to the supervisor, I was told that an error was made in the AT&T order through their system and an account was created without placing a service order. I had waited at my home for 4 hours (cancelling plans) expecting the internet to be installed. I told the supervisor I worked remotely and I needed installation that same day. He informed me that the soonest he could install is August 4, 2015. I proceeded to cancel my service as he was unwilling to help correct the mistake or do anything to remedy the situation.
We are listening and want to help you! I am sorry to hear of the issues you're having. Our Customer Support Leadership would like to expedite the resolution of this matter. Please share a little more information by clicking here to send Digital Life a private message. In your message please include:
Your name
Account number
Address
Contact number
Thank you again for the gift of feedback. Not only do we look forward to resolving this matter, but we will also use this opportunity to further improve our overall customer experience. -
POs for service and account assignment
Hi,
I'm crearting a purchase order for services with item category P and account category K.
Actually the system doesn't assign automatically the G/L account in the field Account assignment of POs.
I set in T030, in transaction GBB, valuation modification 0001, general modification ZCO, valuation class (S001) and the G/L account.
Best regardsHi,
While creating the PO, enter the material group and assign the valuation class to this material group in the folowing node, (Material Management --> Purchasing -->Material Master --> Entry aid for items without material master).
Once you assign the valuation class to material group, it will pick the G/L code from GBB in the OBYC setting (Table T030).
Hope it answers your problem.
Regards -
Slow service and dre4adful customer service
I was enticed to the BT infinity service from an existing ADSL provider with the promise of additional speed. Not the full 20/10 but 17/2. I actually get 6.5/0.6 unfortunately after a catalogue of dreadful customer service and bad technical support I am faced with no other alternative than to open a case with the Ombudsman for communications.
My post is to warn others who get suckered into the promise of a faster connection from BT. The fact is that infinity is no better than ADSL unless you are next to the cabinet or exchange. Same scenario as ADSL. The bad thing is that although the 1st engineer correctly diagnosed the issue immediately after installation BT continued to send another 7 engineers to look into the issue. The tech buddies at the call centre have no idea on what to do other than send another engineer and assure me they are work hard to resolve my issues. The fact is that the call centre staff do not understand the complaint procedure nor can they escalate issues to get a resolution.
After nearly 2 months of being told to re-boot my router and many engineer visits the UK customer agent has finally conceded that the cable is too old to carry a reliable digital signal and that it is too costly for BT Open reach to replace it. Although I am paying for an infinity service I should accept that due to the inferior quality of the BT network I am getting as good as it gets.
I am sorry to say I do not accept that the old antiquated cables that provide the phone service are not up to the job and can be left in place as it is too expensive to replace. Surely every technology company expects to invest in delivering the service they offer their customers and asking me to accept an inferior service but still pay the full price is unacceptable. I do not live out in the sticks I live in a large town. My previous ADSL provider gave a better speed than infinity provides.
I was told by BT that it would not be recommended to take this case to the Ombudsman as it is unlikely I will get anywhere. My view is that if everyone took this stance then the Ombudsman would have no visibility of the poor service BT are providing and their inability to update their infrastructure to meet their obligations. Not only is the speed way too slow the customer service that BT provides is among the worst of any company I have dealt with. Given the size of BT I would have hoped for a better escalation system. Sadly there is no alternative to BT unless Virgin runs by your door as all providers have to utilise the antiquated BT network. They may have spent loads on Century 21 but they missed the final section of cable.
BT has agreed that they are unable to resolve my problem. I have requested a ‘Deadlock’ letter but apparently only special authorised people can issue these and none are available for a few days! So it appears that even when BT have admitted they are at the end of their trouble shooting they are still reluctant to issue the final letter to prove it and allow me to take the next step.
All of this is a sad state of affairs making me back away from BT for any services.Absolutely accept they do not have to provide. However, once an offer has been made and accepted they should have an obligation to deliver on their commitment. If they had never offered me the service at the speed greater than the ADSL I would have stayed put. I do not see how BT can hide behind outdated infrastructure in the 21st century in a built up area and with consumers having NO choice as Virgin is the only competition.
Above this the biggest issue is the appalling customer service. If fact NO customer service. All they have is a tech help line staffed by people trained to speak nicely and ask you to switch off the router or wait for 48 hours for the new profile to take effect. All this given it was never going to work and they knew it. They do constantly call back at the rate of 3 times a day to enquire if the problem is solved tasking no notice of the request to call my mobile phone and harassing my wife at home who has no idea what they are talking about! At one stage she threatened to report them as a nuisance caller!
The problem was diagnosed on the first visit and if they had any tech staff with any knowledge they should have said from the start don’t waste hours talking to our tech buddies ‘cos it’s as good as it gets.
I do not think any of this is unreasonable as I’m just asking for what I am paying for no more or less and an efficient way to get the issue resolved.
I would like to add that eventually after constant complaining and even filling in the complaint form on the web site, that never recvd a reply, I was called by a very helpful lady named Emma who did agree immediately the issue was the aluminium cable that was unable to carry a digital signal. She contacted Open Reach and they performed more tests to absolutely confirm the cable was at fault and they would not replace it. She said there was nothing else that could be done and as GBP28.00 PCM was what I would pay for ADSL I should agree to keep what I had and just accept it.
BT need to understand that a digital service is where we are and if they want to be in the game they need to invest in delivering it or just accept that Virgin have it nailed and leave it all to them and the rest who might not want Virgin will just stick with a slow service. -
For starters, I have had 5 Palm Pre's. The first pre had a battery that I was told was too small (which explained the occasional random shutdowns when being shut). The second pre I had did the exact same thing brand new out of the box. The third pre I had worked perfectly up until several days ago (right around the time change). My calendar synced with G-mail was an hour early for every appointment; also several events were completely missing from my Pre calendar that were on g-mail. In response to this problem I checked the time zone on g-mail with no resolve, and eventually tried erasing my google account on my pre in hopes of a fresh start.
This is when I encountered the real problems.
My Pre would not delete the account. Every time I tried deleting it the top bar read "No Service" or my "Ev" indicator would disappear along with the bars. After this the Calendar app would either freeze or just never delete the gmail account (the gray circle would just spin endlessly for literally 30 minutes). Ever since then I have been experiencing the "No Service" indicator plus random loss of service and Ev (in places where in the past I had PERFECT Ev and Service)
Since then I have called Sprint and Palm multiple times, and both blame each other for the problem. I recently took it in to the Tech's at Sprint and they could not find the problem and ordered me a "refurbished" pre. woohoo.
Today I went and got the "refurbished" pre and within an hour of having it, I noticed that the same problem was being experienced (along with a few dead pixels on the screen). So I took it back to the Sprint store and asked for a new one (or one that just flat out worked and didn't have dead pixels). I then experienced very horrible customer service from Sprint (which was unusual since in the past they have been very helpful) and received a second "refurbished" Pre after a very pointless arguement with a receptionist. By then it was closing time and I had to leave.
Upon arriving back to my dorm, I noticed the same problem was occuring: "no service" messages and no internet/service literally 50% of the time I was looking at the Pre's screen. Also, my second "refurbished" Pre (that I currently have) did the exact same thing my very first one did: it occasionally shut down when I shut it. This leads me to believe that the battery is too small just like my first Pre's battery was. . .
So now I am very frustrated and looking for answers. I have never posted any sort of "cry for help" on the internet before, I hope this wasn't too winey lol.
Does anyone have any idea what is happening to my Pre? Are there other people with a similar issue? Any solutions to the problem?
Any info/help would be greatly appreciated.
Thanks in advance.
Post relates to: Pre p100eww (Sprint)I am on Pre number 5 and am so sorry I gave up my BB. I have had this same issue numerous times and my biggest problem is the battery just drains.....and each one is the same...it freezes, the keyboard does not connect with the screen, the phone calls my last callers in the middle of the night sometimes 2 and 3 times I assume during backup, the tech at the Sprint store tried to help me sync my google calendar and deleted my appointments. On the last refurb my pics did not syn....they said we will keep the phone so you can sync directly, and sent the phone back before I got there. So I lost the pics of my recently passed dog. They were like well they would have charged us 400 a day if we did not send it back........like whatever. My chargers, car, wall and usb to computer work intermittently. I keep my car running to charge the battery. It just continues to drain......and it goes on and on.......I baby sit this phone and cannot use it most of the time. .... palm says oh they should give you a new phone.....sprint says who said that palm? I think about the first few months when i actually was trying to get outlook to sync.......now i just would like to be able to freakin talk on my phone. I purchase an album on amazone and they take the money and i cannot download the music. I tried to convert a song into a ringone I have it for safety and it is really bad. I have to drive an hour to a "corporate store" to beg them to give me a blackberry. I love multitasking and accessing the internet however it is freezing here now and I would like to feel a little safer with having a freaking phone to talk on. I have spent probably a total of 40 hours on this thing since july. They say well do you turn it off and on? how often do you charge it......like its my problem......I remember the early treo's were great and then .................very similar to this 5 phones later and still in palm black abyss. So you see there are others who are having these problems they probably just like me do not want to spend another freaking second talking about this phone.
-
Service/Database Accounts - NT SERVICE\MSSQLSERVER & NT SERVICE\SQLSERVERAGENT - what are they for?
Hi Guys,
I’ve done a fair amount of research for this question but just cannot seem to find the answer to my question in simple, non-DBA, terms.
Server 2008 R2
SQL 2008 R2
There are 2 users in the system database logins (NT SERVICE\MSSQLSERVER, NT SERVICE\SQLSERVERAGENT) … what are they for? It appears that they
are accounts to run the corresponding Windows services but yet they cannot be selected from the list of available built-in accounts, local accounts or domain accounts.
Also, I am using a couple of domain user accounts to run the services, do I need to add them to the database? I changed the service accounts from NETWORK
SERVICE to the domain user accounts using the SQL Configuration Manger which is supposed to take care of managing the user group membership and registry changes but the domain accounts are not in the database …. The services appear to be running fine.
ThanksIn basic terms:
As you say, in the SQL Server Database Engine there are two logins;
NT SERVICE\MSSQLSERVER and NT SERVICE\SQLSERVERAGENT. The Database Engine runs in Windows as a Windows service named
MSSQLSERVER. The NT SERVICE\MSSQLSERVER login is used by the service to connect to the Database Engine. Basically, this is how it connects to itself. The SQL Server Agent runs as a Windows service named
NT SERVICE\SQLSERVERAGENT. The NT SERVICE\SQLSERVERAGENT
login is how the Windows process that is SQL Server Agent connects to the Database Engine to read the
msdb database to find out what it should do; and then do it. Both of these logins are members of the
sysadmin fixed server role, so they can do anything in the Database Engine. And they need to stay that way.
No, they can't be selected in the list of available built-in accounts, local accounts or domain accounts. This is because they are services, not accounts. They have a security identifier (SID) in Windows,
but Windows knows they aren't real users. Windows can authenticate them, but they don't have passwords that any human can use. If you run
lusrmgr.msc and look at the groups, you will see groups like
SQLServerMSSQLUser$computername$MSSQLSERVER and NT SERVICE\MSSQLSERVER
is a member of the group.
As for the account that you used to run the services, this is complicated and has changed from SQL Server 2005 to SQL Server 2008 and now again in SQL Server Code Named 'Denali'. The short answer is that
the account you specify will be used when a process tries to reach outside of the current Windows environment. But within the computer, there is a mix of authorization granted to the domain user, the service, and the Windows group
SQLServerMSSQLUser$computername$MSSQLSERVER.
The good news is that SQL Server Configuration Manager figures out all the stuff you need when you change the accounts. If you are a glutton for punishment, you can get an idea for how complicated this
is by looking at the Denali documentation where I have tried to provide more specific information. (Note this is not the same as SQL Server 2008.) You can see it at:
Configure Windows Service Accounts and Permissions
http://msdn.microsoft.com/en-us/library/ms143504(SQL.110).aspx
Rick Byham, Microsoft, SQL Server Books Online, Implies no warranty -
How to stop sql services and sql agent services on multiple servers
Looking for a t-sql/powershell script to stop/start sql services on multiple servers. Plan is to execute script from centralized server.
Rahulsee
http://www.databasejournal.com/features/mssql/article.php/3644906/Automatically-Stopping-and-Restarting-SQL-Server.htm
http://sqlpowershell.wordpress.com/2013/04/11/powershell-check-start-and-stop-sql-services-of-a-remote-servers/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Maybe you are looking for
-
How to restore a deleted iCloud storage backup? I deleted it all to free up the free 5 GB storage and now on my iPhone 5s some of my Contacts are missing a phone # info and some of the Contacts are missing entirely. Thank you.
-
Consistency Warning - [39008] Dimension Table not joined to Fact Source
I have a schema in which I have the following tables: A) Patient Transaction Fact Table (i.e. supplies used, procedures performed, etc.) B) Demographic Dimension table (houses info like patient location code) C) Location Dimension table (tells me wha
-
Hi all, I am using a database link from between oracle 10g enterprise & oracle 10g express edition on window based system. We are getting below given error at one client system and others clients system is working fine.. ORA-02068: following server e
-
When do we use Infospoke?????????????
Hi Experts, Can anyone please tell me the exact client reqirement when we use Infospoke to extract the data from the data targets.. Iam expecting a real time example.. please help me out... Immediate resopnse will be very helpfull.. Thanks in advance
-
hi - i have a simple jsp that uses a bean to go to the database and grab content to be displayed on the webpage. the problem is that the content in the database itself has some java scriplets in it which are not evaluated since the jsp was already be