[solved] No dhcpd : No /etc/dhcpd.conf file

I've managed to get the KDE desktop running, but ever since starting KDE, I haven't been able to connect to anything online. When I tried to check and edit the /etc/dhcpd.conf file, that file doesn't exist. Looked at the Beginner's Guide but didn't see where I skipped whatever I should have done to make the file. Install worked great, so dhcp worked for that.
What do I do to get dhcp to work? Checked /etc/rc.conf and eth0="dhcp" is uncommented.
Last edited by pottzie (2010-05-14 05:11:38)

What do you mean by this?
wrote:Right now I have three, "network netfs crond," "network crond alsa," "and dbus hal networkmanager alsa crond kdm." Hal's seemed kinda "maybe-ish," as when I entered what I thought was suggested, sometimes nothing happened, sometimes some things did
If those are what you are placing in the daemon section of your /etc/rc.conf then that's probably your problem. Don't use networkmanager daemon unless you have 'networkmanager' and 'network-manager-applet' installed.
Try this
(hal syslog-ng network netfs crond alsa)
Look here for network configuration
http://wiki.archlinux.org/index.php/Beg … NG_Section
And here to start KDM using /etc/inittab instead of /etc/rc.conf
http://wiki.archlinux.org/index.php/Dis … mmended.29
Have Fun!

Similar Messages

Oracle Linux 6.6 I tried to edit the /etc/resplv.conf file on nano, gedit and VI but the result doesn't appear on the file when I cat it

Oracle Linux 6.6 I tried to edit the /etc/resplv.conf file on nano, gedit and VI but the result doesn't appear on the file when I cat it

Hi ! do you mean the file /etc/resolv.conf ? This file should be by default in the /etc/ diretory and contains the dns-name resolutions. http://linux.die.net/man/5/resolv.conf http://www.tldp.org/LDP/nag/node84.html http://en.wikipedia.org/wiki/Resolv.conf

Where is /etc/modules.conf file

I installed the Fedora core 2 and hoped to run with oracle 9i RAC. Many documents indicate that I need to modify the /etc/modules.conf file. But I can't find this file.
Has this file no longer used in Fedora core 2? Has this file been moved to other location?
Please help.

It is called /etc/modules on some distributions, but I cannot tell if this is the case in Fedora2

Firewire module install with rpm not updating "/etc/grub.conf" file

Hello,
Thank you in advance! I am trying to setup Oracle10g RAC on RedHat Enterprise Linux ES 4.0. As a part of that process, I am trying to install the shared disk (Firewire) module on the node using 'rpm' as follows:
rpm -ivh --force oracle-firewire-modules-2.6.9.EL-1286-1.i686.rpm
It is getting installed perfectly. However, I am expecting with "-ivc" option, it is supposed to update "/etc/grub.conf" file. But it is not updating this file. Therefore reboot could NOT load this module and can not proceed further. Any help on this is really appreciated!
Thanks again,
Kishore

karol's link did the deed! I had gone to the page that shows the most up to date mirrors and used that for the install. But when I used the link that karol gave it not only gave me the same URL as I used earlier to install, it gave me some additional suffixes that didn't appear on the page that provided the updated links. When I added /$repo/os/$arch, pacman took off and started burning rubber. So many thanks!
Now I can go ahead and install reflector, which is the first thing I try and do when I get an Arch install up and running. Thanks again.
After seeing karol's script in post#4, I see that the /$repo/os//4arch was showing up there also. I didn't see anything like that when I copied the link to install.
Last edited by pottzie (2012-03-14 02:42:28)

What needs to be confiugred in the dhcpd.conf file to support POAP?

Looking to use the same script poap_script.py, to auto provision my nexus 9k switches but I did not see what the dhcpd.conf should look like. what dhcp options do I need to set to get this feature working?

Looking to use the same script poap_script.py, to auto provision my nexus 9k switches but I did not see what the dhcpd.conf should look like. what dhcp options do I need to set to get this feature working?

[solved]how to stop /etc/resolv.conf keeps being overwritten ???

no matter how many times to change the content, it keeps like that:
# Generated by dhcpcd from eth0
# /etc/resolv.conf.head can replace this line
nameserver 192.168.8.1
# /etc/resolv.conf.tail can replace this line
so i can't add nameserver in it
Last edited by tempo (2010-01-14 15:01:35)

The clue is in the message, use a file called resolv.conf.head to add a nameserver to the top and resolv.conf.tail to add it to the bottom.
It's being overwritten because you are using dhcpcd to auto configure your network settings.
Last edited by Meyithi (2010-01-14 13:03:43)

[Solved] Can't boot up due to error in a conf file

After trying to install kpd it seems that the /etc/kpd.conf file contains an error. After restarting the computer I see an error when it is booting up. Then on the login screen when I type my username for every key pressed 3 chars are show ie username => foo output => fffoooooo.
Coming from a ubuntu I figured I would just restart in simple/safe mode, but there doesn't seem to be one, or at least I don't have one on the boot screen.
I am lost to how ti fix the config file. Anyone have some advice?
Thanks for the help.
Last edited by iso (2009-02-08 16:53:25)

iso wrote:
After trying to install kpd it seems that the /etc/kpd.conf file contains an error. After restarting the computer I see an error when it is booting up. Then on the login screen when I type my username for every key pressed 3 chars are show ie username => foo output => fffoooooo.
Coming from a ubuntu I figured I would just restart in simple/safe mode, but there doesn't seem to be one, or at least I don't have one on the boot screen.
I am lost to how ti fix the config file. Anyone have some advice?
Thanks for the help.
If you still have the ubuntu live cd lying around, you could probably try that out.

[Solved]Add kernel26 to IgnorePkg in /etc/pacman.conf. Not ignored.

Using kdemod4.3(32bit). I re-installed kernel26-2.6.30.5-1-i686(earliest in pacman pkg cache) and added kernel26 and kernel-headers to /etc/pacman.conf IgnorePkg but # "pacman -Syu" still asks to upgrade kernel to 2.30.6-1-i686. What do I add to that IgnorePkg to avoid kernel upgrade? Tried kernel, kernel26 and kernel26*. Adding nvidia,nvidia-utils and xorg-server to Ignorepkg give me that thee aren't upgraded(desirred result). Thanx.
Last edited by lestoil (2009-10-08 18:08:14)

# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
IgnorePkg = nvidia nvidia-utils xorg-server
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
#KDEmod4
[kdemod-core]
Server = http://mirror.rit.edu/kdemod/core/i686
#KDEmod4
[kdemod-extragear]
Server = http://mirror.rit.edu/kdemod/extragear/i686
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#Yaourt
[archlinuxfr]
Server = http://repo.archlinux.fr/i686
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Here is complete /etc/pacman.conf. file without the "kernel" or "kernel26" entry which doesn't work.

Dhcpcd overriding /etc/resolv.conf, 'nohook resolv.conf' [solved]

hello.
I set dhcpcd not to override the /etc/resolv.conf file:
[root@ jenia]# cat /etc/dhcpcd.conf
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
noipv4ll
nohook resolv.conf <----------------------------------------------------------------------------
However, this has no effect:
[root@ jenia]# cat /etc/resolv.conf
domain members.linode.com
nameserver 72.14.179.5
nameserver 72.14.188.5
nameserver 2600:3c00::2
nameserver 2600:3c00::3
options rotate
[root@ jenia]# systemctl start [email protected]
[root@ jenia]# cat /etc/resolv.conf
# This file is managed by systemd-resolved(8). Do not edit.
# Third party programs must not access this file directly, but
# only through the symlink at /etc/resolv.conf. To manage
# resolv.conf(5) in a different way, replace the symlink by a
# static file or a different symlink.
nameserver 8.8.8.8
nameserver 8.8.4.4
nameserver 2001:4860:4860::8888
# Too many DNS servers configured, the following entries may be ignored
nameserver 2001:4860:4860::8844
As you can see dhcpcd ovveride the /etc/resolv.conf file.
How can I avoid this? How can I change the file and make the changes permanent.
Thanks in advance.
Last edited by jenia (2014-07-16 17:20:02)

yes. exactly. i removed and used a text editor to make the necessary changes to a file of the same name (/etc/resolv.conf).
now the changes remained.
thanks.

[SOLVED] How Can I Stop DHCPCD from Overwriting my /etc/resolv.conf...

Hey guys,
For some unknown reason /etc/dhcpcd.conf continually overwrites my /etc/resolv.conf file, eventhough I set the "nohook resolv.conf" hook in /etc/dhcpcd.conf.
This is screwing up my DNS and intermittently creating connection problems. Any of you guys know why the hook is not taking effect or how I can stop dhcpcd from overwritting this file?
Thanks
Last edited by w201 (2013-03-18 19:05:15)

drcouzelis wrote:
w201 wrote:I set the "nohook resolv.conf" hook in /etc/dhcpcd.conf.
kaszak696 wrote:
dhcpcd's configuration file may be edited to prevent the dhcpcd daemon from overwriting /etc/resolv.conf. To do this, add the following to the last section of /etc/dhcpcd.conf:
nohook resolv.conf
I don't think that information will help w201...
I changed my DNS to the Google one (8.8.8.8 or something). That's in "resolv.conf", isn't it? I remember editing some OTHER configuration file, which is then read to create the "resolve.conf" file. There it is, in that link to the wiki, under "Use resolv.conf.head". Does that help you do what you want to do?
There's three techniques at the wiki link, the nohook one, the resolv.conf.head one and the write-protection attribute.

Which configuration file modified the /etc/resolv.conf ?

Hello Everyone,
I have 2 linux VM in my laptop that has been setup in similar way but one of them behaves differently every time it gets rebooted.
This is OEL6 update 5
I configured 4 interfaces:
eth0 - eth3 is setup with NAT-Network to be able to communicate with other VMs only.
eth4 is setup with bridged network.
I've configured the ifcfg-eth# scripts as follows:
Interface
server 1
server 2
eth0
DEVICE=eth0
TYPE=Ethernet
UUID=8cb50704-029f-469a-b031-da44b4a49b74
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
IPADDR=10.1.2.71
PREFIX=24
GATEWAY=10.1.2.1
DNS1=10.1.2.90
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
HWADDR=08:00:27:12:F8:42
LAST_CONNECT=1389967507
DEVICE=eth0
TYPE=Ethernet
UUID=f10e7ab5-7b7e-4bcf-9ddb-a2ab439a776a
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
IPADDR=10.1.2.72
PREFIX=24
GATEWAY=10.1.2.1
DNS1=10.1.2.90
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
HWADDR=08:00:27:45:56:13
LAST_CONNECT=1389968121
eth1
DEVICE=eth1
TYPE=Ethernet
UUID=568d8c14-d28e-48f7-82e5-dd7764968648
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
IPADDR=192.168.5.81
PREFIX=24
GATEWAY=192.168.5.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth1"
HWADDR=08:00:27:B1:D9:D6
DEVICE=eth1
TYPE=Ethernet
UUID=dc09606a-5126-4d2c-a0bc-ea11ce0dc80f
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
IPADDR=192.168.5.82
PREFIX=24
GATEWAY=192.168.5.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth1"
HWADDR=08:00:27:15:7B:39
LAST_CONNECT=1389968121
eth2
DEVICE=eth2
TYPE=Ethernet
UUID=6e6858b9-9709-4334-9b58-bb6f02a30e94
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
HWADDR=08:00:27:9C:16:71
IPADDR=192.168.7.51
PREFIX=24
GATEWAY=192.168.7.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth2"
DEVICE=eth2
TYPE=Ethernet
UUID=283b2c5c-04e1-47ca-8375-6c52d333099f
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
IPADDR=192.168.7.52
PREFIX=24
GATEWAY=192.168.7.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth2"
HWADDR=08:00:27:A8:44:45
LAST_CONNECT=1389968121
eth3
DEVICE=eth3
TYPE=Ethernet
UUID=ecca01b5-e18f-4f7f-b617-0cfe50e17638
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
HWADDR=08:00:27:5C:F8:96
IPADDR=192.168.9.51
PREFIX=24
GATEWAY=192.168.9.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth3"
DEVICE=eth3
TYPE=Ethernet
UUID=9f2f8b5a-2650-412b-9d12-49de5484a877
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
IPADDR=192.168.9.52
PREFIX=24
GATEWAY=192.168.9.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth3"
HWADDR=08:00:27:27:0F:F0
LAST_CONNECT=1389968136
eth4
HWADDR=08:00:27:EC:60:F2
TYPE=Ethernet
BOOTPROTO=none
NM_CONTROLLED=no
DEFROUTE=no
PEERDNS=no
PEERROUTES=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
IPADDR=192.168.1.30
DNS1=192.168.1.90
NAME=eth4
UUID=6c6afa4f-48ce-47c7-9968-3419b4e5f8ea
ONBOOT=yes
LAST_CONNECT=1393844453
HWADDR=08:00:27:FD:E7:7E
TYPE=Ethernet
BOOTPROTO=none
NM_CONTROLLED=no
DEFROUTE=no
PEERDNS=no
PEERROUTES=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
IPADDR=192.168.1.31
DNS1=192.168.1.90
NAME=eth4
UUID=0ca62e7e-6770-45aa-a7a2-bca42cf3ed9c
ONBOOT=yes
LAST_CONNECT=1393849919
however, each time I rebooted, these are the difference on the /etc/resolv.conf and the other configuration
Config
Server 1
Server 2
/etc/resolv.conf
; generated by /sbin/dhclient-script
search wrx4.vm
nameserver 10.1.2.90
nameserver 103.11.48.126
# Generated by NetworkManager
search wrx4.vm
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com
nameserver 10.1.2.90
chkconfig --list NetworkManager
NetworkManager 0:off   1:off   2:off   3:off   4:off   5:off   6:off
NetworkManager 0:off   1:off   2:off   3:off   4:off   5:off   6:off
service NetworkManager status
NetworkManager is stopped
NetworkManager is stopped
I never setup any dhcp client configuration before, but each time the VM is rebooted or started it seems that the /etc/resolv.conf always gets overwritten again.
However, in Server 1, somehow the dhcp client is working and getting the right DNS server IP address.
What I want to achieve for the Server 2 is like the one in the Server 1 where the nameserver I got from the ISP is also configured there.
That will made it easier if I need to download just a small file from the internet.
Other than that, I also wanted to understand what other configuration that could affect this /etc/resolve.conf file gets overwritten, which configuration and how to configure it.
Thanks in advance for your help in advance.
Adhika
Message was edited by: Adhika W

Hi Dude!,
To make it simpler, I can simply delete those interfaces (eth0, eth1, eth2, & eth3) right now and left with eth4 which I think can be directed to the actual question I was asking.
So here's the result of ipconfig on my host:
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : 00-90-F5-CC-F9-DB
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 192.168.1.1
                                       103.11.48.126
   NetBIOS over Tcpip. . . . . . . . : Enabled
As you can see from that result, if you compare the Server 1 and Server 2, the /etc/resolv.conf from Server 1 managed to get that 103.11.48.126, whereas the one in the Server 2 couldn't.
This is exactly what I'm trying to resolve.
Does this make any sense to you?
Just forget about the other interfaces.
Thank you,
Adhika

How to regenerate /private/etc/resolv.conf

Folks,
I use my Snow Leopard macbook pro on multiple networks and recently made the mistake of editing the /private/etc/resolv.conf to add a search path. So now the file looks like so:
# Mac OS X Notice
# This file is not used by the host name and address resolution
# or the DNS query routing mechanisms used by most processes on
# this Mac OS X system.
# This file is automatically generated.
search mydomain.com
nameserver 192.168.2.2
Edit: The file doesn't appear properly but the first few lines are all commented out using #.
I hadn't paid much attention to this file before now so I'm not sure whether this file keeps getting re-generated for every network (e.g. by dhcpd) but it's certainly not being re-generated any more.
I heavily use the "host" command to lookup hostnames which is one of the few commands that uses the /private/etc/resolv.conf file instead of SL's own DNS. I'm definitely feeling pain at this time. Any ideas on how I can get this file to be re-generated again?
FWIW, I repaired permissions on the disk using "Disk Utility" and the permissions look like:
lrwxr-xr-x@ 1 root wheel 11 Dec 1 22:46 /etc -> private/etc
-rwxr-xr-x 1 root wheel 261 Dec 14 21:26 /etc/resolv.conf
-rwxr-xr-x 1 root wheel 261 Dec 14 21:26 /private/etc/resolv.conf
Thoughts?
Message was edited by: Shahbaz Javeed

Depending on your editor, it is possible that the editor created a new file uniquely named file, then renamed the uniquely named file to the original name, causing the file system to delete the current directory entry (the symlink). This would have the effect of deleting the symlink and replacing it with a real file.
Another possibility is that the orignal symlink was changed to resolv.bak (or similar name). if you edited multiple times with an editor that does this, the 2nd editing session would have removed the symlink from the system, and left only regular files.

Sample /etc/sysctl.conf.default for Mac OS X 10.8.4 Server?

Hello:
I foolishly modified the /etc/sysctl.conf file on my Macmini server running 10.8.4 server and now things do not work as expected:
* most programs fail to launch (Firefox, Git, Safari)
* the system takes a long time to boot
* there is no network connectivity
* the Server app (and services) fail to launch
I'll greatly appreciate if somebody could post or point me to a stock or default "/etc/sysctl.conf" file.
I did try deleting the /etc/sysctl.conf file altogether, but it did not solve my problem.
Thanks.

KnowsABit wrote:
It's interesting and worrisome that both of these answers conflict with the instructions at the Postgres web site, and in other posts about installing Postgres on Mountain Lion. According to those resources, there is no such file by default, but creating it (and rebooting) is the way to change these settings.
This thread is about Postgres on OS X Server, which is installed by default. You shouldn't have to do anything else to set it up. If you are installing Postgres on OS X Client, then you may have some work to do. I tried Postgres a couple of years ago. It was pretty clunky. I assume Apple does a better job of configuring Postgres than Postgres. I suggest installing OS X Server if you want to run Postgres and MySQL is not suitable for some reason.

Set systemwide variable with /etc/launchd.conf does not work in 10.10

Hi,
before i upgraded my system, i set in file /etc/launchd.conf some variables. I need this for the Shell, Eclipse and some other tools.
user@osx10-10:~$ cat /etc/launchd.conf
setenv M2_HOME /opt/maven
setenv MAVEN_OPTS "-Xmx2048m -Dmaven.surefire.debug=-Xmx2048m"
user@osx10-10:~$
With Mavericks there was no problem, since Yosemite no Variables are set.
Also when i try to set it manually with launchctl setting xxxxx xxxx, no variable is set.
Does anyone has a workaround for me?
Regards
Joerg

Alex It should work . by the way your PATH variable should be placed in /etc/paths like this :
/usr/bin
/bin
/usr/sbin
/sbin
/usr/local/bin
/Users/alex/Dev/apache-ant-1.9.2/bin
Note after each line there is a return key
As for environment variables open your ~/.bash_profile and place the.
export ANT_HOME = /Users/alex/Dev/apache-ant-1.9.2
launchctl setenv ANT_HOME $ANT_HOME
export ANT_OPTS = -Xmx512M
launchctl setenv ANT_OPTS $ANT_OPTS
make sure you save and restart all applications that need to read environment variables. I faced the same problem with intelliJ accessing M2_HOME
As a side note : consulting the man pages of launchctl(1)
DEPRECATED AND REMOVED FUNCTIONALITY
     launchctl no longer has an interactive mode, nor does it accept commands from stdin. The
     /etc/launchd.conf file is no longer consulted for subcommands to run during early boot time; this func-
     tionality was removed for security considerations. While it was documented that $HOME/.launchd.conf
     would be consulted prior to setting up a user's session, this functionality was never implemented.
     launchd no longer uses Unix domain sockets for communication, so the LAUNCHD_SOCKET environment vari-
     able is no longer relevant and is not set.
     launchd no longer loads configuration files from the network

How to test after commenting unnecessary service in /etc/inetd.conf

Hi All,
I have a requirement to comment all unnecessary services listed below in /etc/inetd.conf file.
Pls suggest a test scenario which shows that these services are disabled after commenting
The list of unnecessary services are :
echo stream tcp6 nowait root internal
echo dgram udp6 wait root internal
discard stream tcp6 nowait root internal
discard dgram udp6 wait root internal
daytime stream tcp6 nowait root internal
daytime dgram udp6 wait root internal
chargen stream tcp6 nowait root internal
chargen dgram udp6 wait root internal
comsat dgram udp wait root /usr/sbin/in.comsat in.comsat
talk dgram udp wait root /usr/sbin/in.talkd in.talkd
uucp stream tcp nowait root /usr/sbin/in.uucpd in.uucpd
finger stream tcp6 nowait nobody /usr/sbin/in.fingerd in.fingerd
rstatd/2-4 tli rpc/datagram_v wait root /usr/lib/netsvc/rstat/rpc.rstatd rpc.rstatd
rusersd/2-3 tli rpc/datagram_v,circuit_v wait root /usr/lib/netsvc/rusers/rpc.rusersd rpc.rusersd
walld/1 tli rpc/datagram_v wait root /usr/lib/netsvc/rwall/rpc.rwalld rpc.rwalld
sprayd/1 tli rpc/datagram_v wait root /usr/lib/netsvc/spray/rpc.sprayd rpc.sprayd
name dgram udp wait root /usr/sbin/in.tnamed in.tnamed
bootps dgram udp wait root /usr/sbin/bootpd bootpd
Thanks
gattu

How to turn your computer into a Virtual (Personal)Router.
Our hotel the Grand Oasis Cancun provided internet for only 36 hours and you could only use it on one device which comes to my next option as using your Laptop as a Personal Router to broadcast WiFi to any devices near your computer. Our room was on the Second level of the Pyramid at Grand Oasis and I was able to access it while at the VIP lounge below our room. Before our supposedly free internet service ended.
I attempted using the hotel next door since I was getting a good signal from the Omni Hotel. They offered complimentary 24hr internet access using your browser as a way to track your use. Once you find the signal of the Omni it will open your browser I used Google Chrome, after it opens you go threw a few simple steps and your ready.
I learned that after the 24 hours are up all you have to do is disconnect from their network, just run Ccleaner(free program) then find the Signal of the hotel and you will be given another 24 hours. What Ccleaner(<--download there) does is clears anything attached to your browser ie cookies temp files etc. it cleans your browser history giving you a way of not paying for the hotel fee of internet and giving you free WiFi. this is only if you are next to the Omni hotel :).
What you need to download to turn your computer into a hotspot need to say is this little easy to use program Virtual Router. Once it has download test at your home to make sure it works with you devices. This will work with Tablets, Phones and other computers that cant find the Omni WiFi signal. Your welcome. To use it, is simple. Open program>make a password>select WiFi and start VR.

[solved] No dhcpd : No /etc/dhcpd.conf file

Similar Messages

Maybe you are looking for