[Solved] No sound out of M Audio 2496

I have an onboard Intel card and the MAudio card and I just use ALSA.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: M2496 [M Audio Audiophile 24/96], device 0: ICE1712 multi [ICE1712 multi]
Subdevices: 1/1
Subdevice #0: subdevice #0
The Intel card works fine.
The MAudio card, however, does not output any sound at all. The snd_ice1712 module is loaded and when I send a sound file to the device, like so:
aplay -D plughw:1,0 /usr/share/sounds/alsa/Front_Center.wav
I can see the levels in envy24control moving, so I know the card is receiving the signal, but nothing comes out of the speakers.
What I have tried:
Disabling the onboard card in the BIOS
Editing /etc/modprobe.d/alsa.conf to make the 2496 load in the first slot
Unmuted all the channels, devices etc in alsamixer and envy24control
My ~/.asoundrc is from the ALSA wiki for this card
Took the card to a neighbours and plugged it into a Windows box and (eventually) got sound out of it..
Read the threads on these boards and searched the web for non-Pulse fixes
I am at a loss. I know the card works, but I can't seem to get a peep out of it.
Is there something obvious that I am missing?
Last edited by jasonwryan (2012-03-23 06:44:20)

jasonwryan wrote:Is there something obvious that I am missing?
Are the speakers are plugged into the card? (Eric ducks and runs)
Hi Jason, good to see you.

Similar Messages

Creating 5.1 surround sound out of stereo audio

Hi,
I'm new to surround sound editing, so for the past few weeks I've been searching through internet how to create suround sound for my movie. I have a whole movie already done in Premiere Pro 5 (every scene in it's own squence). In these sequences I have stereo audio clips that create a complete stereo sound, but since this movie is going to go on film festivals I have to create surround sound.
Through my reasearch I came across many explanations of how to create it, but the more I read the more it confused me so I decidet to ask for help on this forum.
1. Is it posible to create surroundsound directly out of stereo audio (I know that the sequences that you are working in has to be set to surround sound) that I have in first, second and third chanel, that have surround sound controls above them in Audio mixer?
2. I know that in 5.1 chanels you can only inport 5.1 surround sound tracks. My question is, do I have to take each stereo clip, transform it in mono clip and then create a stereo clip out of that mono clip?
3. Did I completly miss the whole concept of creating surround sound and that I would have to do it diferently?
Thanks for helping out, Jaggarjack

To output to DD 5.1 SS, you will need an Encoder, like the Minnetonka Audio SurCode DD5.1 SS plug-in.
You can also use Audition (do not know about SB) to create 6-channel files (usually WMA w/ either 5, or 6 discrete channels, depending on how you handle the LFE). Still, to use such a set of files with Audio-Visual material, you will need an Encoder. Minnetonka Audio has others, like the SurCode DD 5.1 SS stand-alone and the DTS stand-alone.
If you have disassembled the original audio streams into mono sources, you can create faux 5.1 SS, and with a little work, it can be quite convincing. The 5.1 controls in a 5.1 Master Project, can be very useful for "creating" your sound stage. You can also use those to feed certain frequencies from other sources to the LFE, and to the Center channel. With good stereo in the Front speakers, you should already have a decent phantom Center, and can punch that up even more.
I would recommend starting with the Help File for "Surrond Sound," to get the basics down, plus the mechanics in PrPro. HERE is a little sample. You might also want to see the links in this PrPro-Wiki Search for more material.
The Recording Academy's Producers & Engineers' Recommendations for Surround Sound Production is useful paper.
I recommend three books:
Surround Sound, Second Edition: Up and Running, Tomlinson Holman (cannot find my copy for ISBN)
Instant Surround Sound, Jeffery Fisher, CMP Books ISBN 1-57820-246-9
Basics of Video Sound, Des Lyver, Focal Press ISBN 0-240-51561-7
That would be a good start.
Happy reading, and up-mixing,
Hunt

[SOLVED]No Sound - ALSA - Maybe wrong audio device.

Yesterday I installed Arch and it has been going well except that I can not get my sound working. Following https://wiki.archlinux.org/index.php/Ad … chitecture I installed alsa-utils and then used alsamixer to unmute channels. While I experimented with the channels I had a youtube video open and so I should have heard something if it had worked.
I seem to have two sound cards. When I run alsamixer it defaults to the "Intel Haswell HDMI" chip and "Item: S/PDIF". I can unmute the S/PDIF channels but there is no volume bar. I suspect that this device is set as a default somewhere but it is not the one I want to use.
Hitting F6 and choosing the "HDA Intel PCH" card has many columns. I have them all unmuted and I've played around quite a bit with turning various things up and down. The speaker I have in plugged into the back of the desktop I am using and is attached with both a round pale green connector and a usb connector.
When I turn up the volume on the <Rear Mic> I can hear the static volume go up on the speaker. So I could change the volume on the speaker but the speaker was not getting audio from the web browser I had open. When I turn up the volume on the <Front Mic> I can hear a high pitched noise increase, my only guess for where its coming from is the tiny speaker that I have plugged right into the motherboard.
I've tried researching and I would like to try and change the default sound card like in this thread: https://bbs.archlinux.org/viewtopic.php?id=186597. But I'm afraid that I'm newer to Arch/Linux than those people or at least I'm confused trying to follow that advice. My /etc/modprobe.d directory is empty. If I made a .conf file like in that answer I would not know what to name it.
Here is the output of some relevant (hopefully) commands:
$ lspci -vnn | grep -A 1 -i audio
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: ASRock Incorporation Device [1849:0c0c]
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: ASRock Incorporation Device [1849:8892]
$ aplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
default:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
lsmod | grep snd
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 65536 1
snd_hda_codec_generic 65536 1 snd_hda_codec_realtek
snd_hda_intel 28672 0
snd_hda_controller 28672 1 snd_hda_intel
snd_hda_codec 114688 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 90112 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 28672 1 snd_pcm
snd 69632 8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore 16384 2 snd,snd_hda_codec
$ speaker-test
speaker-test 1.0.29
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1024:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
Thank you for reading.
Last edited by buffalo (2015-06-13 22:47:37)

I followed Head_on_a_Stick's advice and the speaker is now working! Thank you so much Head_on_a_Stick. The one other time I posted on this forum was last February and you helped me out then too. You are my favorite!
Thank you ewaller as well, but rather than look at aplay -l I think I will mark this thread as [SOLVED].
The thing I'm still curious about is how did you know what to name the file /etc/modprobe.d/alsa-base.conf ?
Time for me to figure out how to get the headphone jack working.

[SOLVED] USB sound card problems and audio setup

I want to clarify and correctly set up my ThinkPad T61 sound system finally.
I'm running Arch64 + KDE.
There are two sound cards - the internal HDA Intel and external USB CM118.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Set [C-Media USB Headphone Set], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
First of all, why are there both analog and digital subdevices?
I just need playback and/or recording support for these applications: opera, firefox, skype, clementine, mplayer, vmplayer. As high quality as possible.
Per-application sound control would be nice but if that adds too much clutter, I could live without it. No need for audio streaming or any other luxuries.
All the applications should use the USB card whenever it's plugged in. The internal SC should take over when CM118 is unplugged.
The problem is that most of the time it doesn't work. For example, if I plug out the USB card and then run some application like Clementine or Firefox there would be no sound ("connection refused" in Clementine).
Here is my asound.conf:
defaults.pcm.card 0
defaults.pcm.device 0
defaults.ctl.card 0
Also kMix/amix should switch the master channel from HDA Intel Master to C-Media Master automatically. The only way to do this is to write some kind of script, right?
AFAIK the following audio components are installed: ALSA, OSS (for some unknown reason), Phonon, Gstreamer.
I guess I can uninstall OSS without worries as no one seems to need it (checked with "whoneeds").
What about that Phonon? Would it override the asoud.conf if I set default device there? Why there are so many different devices in the Phonon configuration list:
C-Media USB Headphone Set, USB Audio (Default Audio Device)
C-Media USB Headphone Set (USB Audio)
C-Media USB Headphone Set, USB Audio (IECblablabla)
hw:1,0
hw:1,1
default
Intel Analog
Intel Digital
blablalba
And that C-Media triplet for every USB port the CM118 has been plugged in.
Too much confusion! All that mess for just two different cards.
So what is the proper way of setting primary and secondary sound cards in this situation?
Thank you!
Last edited by andrisll (2012-07-19 08:48:28)

I am sorry for my very late response and the lack of structure in my post.
I did some investigation and found a rather acceptable workaround for one of my problems described below.
Here is the basic functionality I need:
1. Automatic (on the fly) switching to the external sound card when it's plugged in and automatic fallback to the integrated SC when usb is unplugged.
2. Automatic (on the fly) switching of the kMix's master channel according to the changes mentioned above.
As for the first problem, I found this udev rule:
KERNEL=="pcmC[D0-9cp]*", ACTION=="add", PROGRAM="/bin/sh -c 'K=%k; K=$${K#pcmC}; K=$${K%%D*}; echo defaults.ctl.card $$K > /etc/asound.conf; echo defaults.pcm.card $$K >>/etc/asound.conf"
KERNEL=="pcmC[D0-9cp]*", ACTION=="remove", PROGRAM="/bin/sh -c 'echo defaults.ctl.card 0 > /etc/asound.conf; echo defaults.pcm.card 0 >>/etc/asound.conf'"
This solution has some disadvantages but it is acceptible. If you know of any better solution, please tell me.
For the second problem, I found this script which uses qdbus org.kde.kmix /Mixers org.kde.KMix.MixSet.setCurrentMaster method to set the master channel. However, I think that constant monitoring for the usb SC being plugged is not very effective. So I thought appending the following code to the second line of the previous udev rule would do the work:
, RUN+="/usr/bin/qdbus org.kde.kmix /Mixers org.kde.KMix.MixSet.setCurrentMaster "ALSA::C-Media_USB_Headphone_Set:1" "Speaker:0""
But that results in some weird behaviour: master channel stays the same but there would be three new tabs in the kMix window now: USB Set", USB Set# and USB Set$.
Here's what log messages tell us:
07/14/12 12:25:13 PM localhost kernel [10889.749048] usb 3-1: new full-speed USB device number 13 using uhci_hcd
07/14/12 12:25:14 PM localhost kernel [10889.914921] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1a.1/usb3/3-1/3-1:1.3/input/input21
07/14/12 12:25:14 PM localhost kernel [10889.915454] generic-usb 0003:0D8C:000C.000C: input,hidraw0: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1a.1-1/input3
07/14/12 12:25:14 PM localhost mtp-probe checking bus 3, device 13: "/sys/devices/pci0000:00/0000:00:1a.1/usb3/3-1"
07/14/12 12:25:14 PM localhost mtp-probe checking bus 3, device 13: "/sys/devices/pci0000:00/0000:00:1a.1/usb3/3-1"
07/14/12 12:25:14 PM localhost mtp-probe checking bus 3, device 13: "/sys/devices/pci0000:00/0000:00:1a.1/usb3/3-1"
07/14/12 12:25:14 PM localhost mtp-probe checking bus 3, device 13: "/sys/devices/pci0000:00/0000:00:1a.1/usb3/3-1"
07/14/12 12:25:14 PM localhost mtp-probe bus: 3, device: 13 was not an MTP device
07/14/12 12:25:14 PM localhost mtp-probe bus: 3, device: 13 was not an MTP device
07/14/12 12:25:14 PM localhost mtp-probe bus: 3, device: 13 was not an MTP device
07/14/12 12:25:14 PM localhost mtp-probe bus: 3, device: 13 was not an MTP device
You see, the probe thing is running multiple times!
And here is an excerpt from udev debugger:
starting '/usr/bin/qdbus org.kde.kmix /Mixers org.kde.KMix.MixSet.setCurrentMaster '
'/usr/bin/qdbus org.kde.kmix /Mixers org.kde.KMix.MixSet.setCurrentMaster '(err) 'Could not connect to D-Bus server: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11'
'/usr/bin/qdbus org.kde.kmix /Mixers org.kde.KMix.MixSet.setCurrentMaster ' [2769] exit with return code 1
'/usr/bin/qdbus org.kde.kmix /Mixers org.kde.KMix.MixSet.setCurrentMaster '(err) 'Could not connect to D-Bus server: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11'
Some kind of X11 problem... And also happening twice! Why?
Running the setCurrentMaster method in terminal works very nicely, so the problem must be the way udev runs it.
One last thing - sometimes the usb SC automatically reconnects (disconnects and connects). I read somewhere that most probably the usb device makes the trouble, but maybe there are other possiblities?
Last edited by andrisll (2012-07-14 10:04:16)

Sound out reverts to internal speakers at every shut down

Everytime I turn on my Mac Pro I have to go to System Preferences and change the sound to Line out. Every time I shut down the sound out defaults to the internal speakers. is there anyway to stop this?

Things you can try.
1. Smc and pram resets.
2. See if you can get it to "stick" by setting the sound out preference with Audio MIDI Setup (in your Utilitiles folder).
3. Last resort -- temporarily remove the two plists in /Library/Preferences/Audio.

In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)

I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.

M-Audio 2496 / Sound Pops w/ ALSA

Greetings.
I'm using a M-Audio 2496 sound card with headphones, notably through a headphone amp. Through my favorite music player, Audacious, I typically listen to music at any time I'm in front of the computer. Unfortunately, since I've came to Arch (a month now or so), I've been dealing with a slight problem while setting the player to use ALSA, and I'm very unsure of how exactly to go about fixing it.
Upon allowing ALSA to determine it's own asound.state for the card, things work well soundwise with the exception of a slight pop every now and then. It's usually very subtle, but it can be very annoying after awhile as my attention tends to turn more towards it than the song playing. The pops only occur in the left speaker of the headphones, and it's usually directed with odd notes; high or low, but predominantly the higher of the two.
If I allow Audacious to play using OSS (choosing OSS in it's config), the sound works perfectly. If I allow sound to play in Windows, the sound works perfectly. As a result of these two trials, it's obvious the card nor the headphones w/ amp accessory are at fault.
I've attempted turning down the volume in alsamixer (on both ADC 0 and 1 as well as DAC 0 and 1) and following it up with alsactl store to no avail. I've turned down the bitrate from 96000 to 48000, but alas, nothing there either.
Suggestions? It's not an overbearing problem by any means, but it's worth throwing out there.

Also try playing with audacious' "buffer time" value in the "advanced settings" of audacious' audio preferences.
Also see thread for advanced configuration of ~/.asoundrc

PCI Sound Blaster X-Fi Xtreme Audio Get No Digital Sound Out to my Surround Reciev

I have read almost everything but CANT FIGURE THIS OUT, PLEASE HELP ME OUT HERE :-)
My PCI Sound Blaster X-Fi Xtreme Audio is conected to my Sony DTS/DD Reci'ver using a Mini Jack to Toslink cabel connected in the blue Digital Out minijack on the sound card and to my Optical?Toslink input on my reciever.
I have enabled SPDIF out / Digital Output Only
I have tried whit and whitout the Bit-Matched
I have treied the different sampling rates 44, - 96 KHz
I have tried playing from MS Media Player and DivX player. (dvd, mp3, radio li've, nett tv)
Im using Vistax32
I believe i have the correct settings and the correct cabel, but cant get no digital sound out, whats wrong?
First I tought I neede the Digital I/O module from Creativ, but I have read that this is?NOT necessary.
PLEASE ANY THING THAT CAN HELP ME SOLVE THIS WOULD MAKE ME REALLY HAPPY :-)

YOU DONT NEED THE I/O accesory, or rather it is not essential. (unless your reciever only has digital optical(toslink) in?My experiment worked! alss ya need to connect from the sound cards digital out to your recievers coax digital audio?in is: "mono" mini (/8 inch) male to rca style male coax cable. you may have to choose digital only and somy other tricks from a given creative software(?they vary)?and or select the correct input for a given reciever....my Harman Kardon avr 00?and avr 300 series?are particularly tricky. Got pandora one up and running. Devo sounds good!
Movies tonight via Netflix streaming.....YAY!

I want to plug my apple tv into a projector but i want to break the sound out and plug this in to a sperate audio solution which has 2 phono's. Is there a lead that does this?

I want to plg my apple tv in to a projector but i want to break the sound out to a seperate audio solution. Is there a lead that I can use? The sound system has 2 x phono connections?

The sound can already be "broken out" by using the optiocal cable jack. That, of course, assumes your audio input is capable of optical inputs. If not, you might have alook into something like this: https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=opt ical+to+rca+converter&tbm=shop

[SOLVED] Connecting my guitar to my pc and get sound out?

I have a guitar and a cable that came with the game Rocksmith for ps3. The cable is a regular guitar cable with a usb out. Is there any software that I could use to get sound out from my pc. When I connect it to my pc, it recognizes my guitar as a microphone. I searched and all I found was some $500 windows software. Thank you for all the help.
Last edited by lazarojhr16 (2012-12-19 13:57:40)

creatid wrote:
If you have a decent sound card this might work for processing the guitar sound, but I haven't tried this myself even though I have the cable. It basically depends on what is put out through the usb cable. You might want to install some audio recording software, treat the input as a microphone and see what is being captured.
However, it is probably a better idea to connect the guitar directly to the sound card with a regular cable (through a mixer or with an adapter). The translation process in the cable will very likely only add latency. A bit more information about what you are trying to accomplish will get you better answers :-)
I just wanted to get sound out of my computer because I have no amp or any money to buy one right now. I have some nice computer speakers and thought that the cable might work since it is a usb. I'm not using my ps3 because it broke or else I would just use my tv. But thanks for the idea. I'll keep looking around.

No Sound out- test one, two- Sound bars are lighting up but nothing coming out built in audio

For some reason I can't get any sound out of premier pro. I haven't used it many times before but I'm sure I ahd audio when I did.
I switched from doing compositing in After Effects to PPro because AE was chooking on a simple luma track matte using one video to matte/key another... so I find myself in PPro.
Is there anything simple I could be missing which would explain why I'm not getting audio out of my Built-in speakers from Premier? iTunes kicking out the jams no probs.\ as was AE
Strangly every time I start SoundFlowerBed it quits as soon as I leave it. Normally keeps a little flower icon in the menu bar (OS X) to access it and route it's audio bus (SoundFlower itself is a low-letency audio routing system extension) to various outputs.
With SoundFlowerBed I can access OS X Audio Setup (as opposed to Sound Control panel)

I found an uninstaller in Utilities and it has a cross thru it indicating not OS compatible. I dounble clicked and tells me it's a PPC app that can't be run (since I'm on 10.7.5 no rosetta for PPC). I'm not certain that relates to the actual SoundFlower that is running, it may just be a relic of auto-migration from a PPC MacPro.
Are you taking guess Jim or do you know there are issues b/w the two softwares?
I'm going to the Cycling74.com | Soundflower website now to investigate further.

No sound out of my MAC PRO Optical Digital audio port

I own a Mac Pro early 2007, running MAC OS X Ver 10.6.7
I also have a set of Logitech Speakers Z5500 connected to the Optical digital port
No problem ever until now
Suddenly I am not getting any sound out my Mac Pro.
The speaker are testing fine, the volume is set correctly and in the system preferences, in the Sound function the device is selected for Digital Out.
I am at my rope's end.
Any help will be appreciated
Thanks
Carlos

sircolio:
I took my apple to teh Apple Store and one of the geniuses analyzed to be a hardware problem.
It will cost me $500.00 to have fixed. Thanks but not thanks

No sound out of back line out MacPro Bootcamp 3.1 Windows 7 64bit

No sound out of back line out speakers.
MacPro Early 2008
Bootcamp 3.1
Windows 7 64bit
Realtek HD audio driver.
I have speakers plugged into the back line out.
They work in Mac 10.6.4 (as always) and in Parallels 5 Windows 7 using Bootcamp partition.
All other jacks work. In Realtek driver it shows nothing connected to that jack.
Anybody else have this issue?
Anybody else have solved this?

Anyone at all?
Even if you don't have the issue yet have a similar setup. Maybe I can figure out if there's a driver update I may need.
BTW I KNOW others have this as I've seen this mentioned on other forums. What I do NOT know is whether it's "everyone" or there's something about systems that don't have this issue, I need to follow.

Dv6 Only plays Sound out of the built in speakers if headphones are plugged in ...please help

My Pavillon Dv6 Only plays Sound out of the built in speakers if headphones are plugged in. It plays sound from both when there plugged in. Please hep me.

Step 1:
In troublshooting the problem you may follow the steps provided below.
a. Click Start, type Sound in the Start Search box.
b. Click Sound in the search results at the top of the Start menu.
c. Click the Playback tab. Notice the check mark next to the default device. For most users,the default device is speaker, change it to headphones. Make sure that your audio settings are configured as expected.
Step 2:
On the Playback tab, select the playback device, click Properties, click the Advanced tab, and make sure that the Default Format is set to the value that you expect. When you finish, close this window to return to the previous window.
Step 3:
On the Playback tab, select the playback device, click Configure, and then make sure the configurations are set correctly.
Method 2:
If the issue persists then I suggest you to follow these below mentioned steps to mute all other sounds when windows detects any communications activity.
a. Click Start, type Sound in the Start Search box.
b. Click Sound in the search results at the top of the Start menu.
c. Click the Communications tab.
d. Click on the radio button according to your convenience, under When Windows detects communications activity.
After performing the above steps you may check for the issue.
For more troubleshooting you may visit this below mentioned link.
Tips for fixing common sound problems
http://windows.microsoft.com/en-us/windows7/Tips-for-fixing-common-sound-problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Multiple Audio out: usb dac audio out and hdmi out

Good afternoon everyone, I have a 2010 mac mini with the following audio set up.
- A usb dac (xtreamer) connected to my stereo amplifier
- an Hdmi cable to the tv to get video and audio diretcly to the tv
Is it possibile by any chance to get simoultanesly audio output both from usb audio out and hdmi audio out???
In "midi preference panel" I tried to create a "virtual" sound card but i am not able to get sound simoultanesly. or via hdmi, or via usb.
this is quite disappointing because if I want to listen to music with the amplifier and then watching a simple video with mac mini and tv only I need to go back to the audio preferences and set up manually each time.
Is it possible to solve this issue???
Thanks a lot and gretings from Italy

I can select ATV audio out (Airplay setting) to either my Airport Express or my computer so it must be transmitting via airplay. Using a combination of Airserver, Airfoil and Airfoil Speakers I managed to get the ATV audio content on both my PC and my Airport Express at the same time but it cuts out the ATV audio.
My aim is to have a movie on ATV transmitting the Audio to ATV AND my stereo (which is hooked up to the Airport Express).
Cheers

[Solved] No sound out of M Audio 2496

Similar Messages

Maybe you are looking for