[SOLVED] pacman -Sf not working
# pacman -Sf vtun
resolving dependencies...
error: cannot resolve "openssl<=0.9.8g", a dependency of "vtun"
error: failed to prepare transaction (could not satisfy dependencies)
:: vtun: requires openssl<=0.9.8g
# pacman -Q openssl
openssl 0.9.8h-3
Shouldn't I be able to force this package to install? It doesn't work the other way either. If vtun is already installed then openssl cannot be upgraded. It also cannot be forced.
# pacman -Sf openssl
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: vtun: requires openssl<=0.9.8g
I'm a bit confused by this. I thought the --force option would override any dependency issues.
Last edited by derelict (2008-06-25 18:09:37)
from man pacman
-d, --nodeps
Skips all dependency checks. Normally, pacman will always check a
package´s dependency fields to ensure that all dependencies are
installed and there are no package conflicts in the system.
-f, --force
Bypass file conflict checks and overwrite conflicting files. If the
package that is about to be installed contains files that are
already installed, this option will cause all those files to be
overwritten. This option should be used with care, ideally not at
all.
--force has nothing to do with dependency issues.
Similar Messages
-
[SOLVED] pacman is not working!
Hey guys,
I'm trying to remove kdemod or any of the apps that were installed with it by using this command:
pacman -Rsu kdemod
Here's what happens next, i copied from my console:
[root@rocketship ~]# pacman -Rsu kdemod
kdemod not found, searching for group...
:: group kdemod:
kdemod-common kdemod-kdebase kdemod-kdebase-runtime
kdemod-kdebase-workspace kdemod-kdegraphics-common kdemod-kdelibs
kdemod-kdemultimedia-common kdemod-kdenetwork-common
kdemod-kdepim-akregator kdemod-kdepim-common kdemod-kdepim-kmail
kdemod-kdepim-knotes kdemod-kdepim-korganizer kdemod-kdepimlibs
kdemod-kdeutils-common kdemod-oxygen-icons kdemod-xkit qtmod
qtmod-phonon
Remove whole content? [Y/n] y
checking dependencies...
warning: removing kdemod-kdebase-runtime from target list
warning: removing kdemod-kdebase-workspace from target list
warning: removing kdemod-kdebase from target list
warning: removing kdemod-kdelibs from target list
warning: removing kdemod-kdepimlibs from target list
warning: removing kdemod-kdegraphics-common from target list
warning: removing kdemod-kdemultimedia-common from target list
warning: removing kdemod-kdenetwork-common from target list
warning: removing kdemod-kdepim-common from target list
warning: removing kdemod-kdepim-kmail from target list
warning: removing kdemod-kdepim-akregator from target list
warning: removing kdemod-kdepim-knotes from target list
warning: removing kdemod-kdepim-korganizer from target list
warning: removing kdemod-kdeutils-common from target list
warning: removing qtmod from target list
warning: removing qtmod-phonon from target list
warning: removing opencv from target list
warning: removing xine-lib from target list
warning: removing libssh from target list
warning: removing libcaptury from target list
warning: removing lm_sensors from target list
warning: removing polkit-qt from target list
warning: removing capseo from target list
warning: removing kdemod-oxygen-icons from target list
warning: removing kdemod-xkit from target list
warning: removing polkit-kde from target list
warning: removing sane from target list
warning: removing exiv2 from target list
warning: removing qca from target list
warning: removing kdemod-common from target list
warning: removing openexr from target list
warning: removing strigi from target list
warning: removing soprano from target list
warning: removing attica from target list
warning: removing shared-desktop-ontologies from target list
warning: removing tunepimp from target list
warning: removing cyrus-sasl-plugins from target list
warning: removing kdemod-libindicate-qt from target list
warning: removing akonadi from target list
warning: removing cyrus-sasl from target list
warning: removing openldap from target list
warning: removing boost from target list
warning: removing mysql from target list
warning: removing postgresql-libs from target list
warning: removing libmysqlclient from target list
warning: removing kdemod-libindicate from target list
warning: removing rrdtool from target list
warning: removing libdc1394 from target list
warning: removing ilmbase from target list
warning: removing libieee1284 from target list
warning: removing clucene from target list
warning: removing redland from target list
warning: removing libiodbc from target list
warning: removing virtuoso from target list
warning: removing libofa from target list
warning: removing libusb1 from target list
warning: removing fftw from target list
warning: removing mysql-clients from target list
warning: removing raptor from target list
warning: removing rasqal from target list
Do you want to remove these packages? [Y/n] y
[root@rocketship ~]#
So right after I press "y" to remove the packages, nothing happens. The packages remain on the system. I want to remove these packages, then re-install Gnome so any packages that it might need are re-installed just in case. I've done this on other systems after deciding which Desktop Environment i liked better. But in this case, pacman is just not working!
I'm stumped. Any ideas?
Last edited by trusktr (2010-03-25 20:07:53)Alright, so it's not working without the u option as well .:B:..
Here's what I'm getting:
[root@rocketship ~]# pacman -Rs kdemod
kdemod not found, searching for group...
:: group kdemod:
kdemod-common kdemod-kdebase kdemod-kdebase-runtime
kdemod-kdebase-workspace kdemod-kdegraphics-common kdemod-kdelibs
kdemod-kdemultimedia-common kdemod-kdenetwork-common
kdemod-kdepim-akregator kdemod-kdepim-common kdemod-kdepim-kmail
kdemod-kdepim-knotes kdemod-kdepim-korganizer kdemod-kdepimlibs
kdemod-kdeutils-common kdemod-oxygen-icons kdemod-xkit qtmod
qtmod-phonon
Remove whole content? [Y/n] y
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: kdemod-kdeaccessibility-common: requires kdemod-kdebase-runtime>=4.4.0
:: kdemod-kdeadmin-common: requires kdemod-kdebase-runtime>=4.4.0
:: kdemod-kdeartwork-common: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdebase-doc: requires kdemod-kdebase>=4.4.0
:: kdemod-kdebase-kwrite: requires kdemod-kdebase>=4.4.0
:: kdemod-kdebase-runtime-doc: requires kdemod-kdebase-runtime>=4.4.0
:: kdemod-kdebindings-common: requires kdemod-kdelibs>=4.4.0
:: kdemod-kdebindings-common: requires kdemod-kdepimlibs>=4.4.0
:: kdemod-kdeedu-common: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdegames-common: requires kdemod-kdelibs>=4.4.0
:: kdemod-kdegraphics-doc: requires kdemod-kdegraphics-common>=4.4.0
:: kdemod-kdegraphics-kolourpaint: requires kdemod-kdegraphics-common>=4.4.0
:: kdemod-kdelibs-doc: requires kdemod-kdelibs>=4.4.0
:: kdemod-kdemultimedia-doc: requires kdemod-kdemultimedia-common>=4.4.0
:: kdemod-kdemultimedia-juk: requires kdemod-kdemultimedia-common>=4.4.0
:: kdemod-kdemultimedia-thumbnailers: requires kdemod-kdemultimedia-common>=4.4.0
:: kdemod-kdenetwork-doc: requires kdemod-kdenetwork-common>=4.4.0
:: kdemod-kdenetwork-kppp: requires kdemod-kdenetwork-common>=4.4.0
:: kdemod-kdenetwork-krdc: requires kdemod-kdenetwork-common>=4.4.0
:: kdemod-kdenetwork-krfb: requires kdemod-kdenetwork-common>=4.4.0
:: kdemod-kdepim-akonadiconsole: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-doc: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-kalarm: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-kjots: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-knode: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-kmail>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-akregator>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-knotes>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-korganizer>=4.4.0
:: kdemod-kdepim-ktimetracker: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-wizards: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdeplasma-addons: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdeplasma-addons: requires kdemod-kdepimlibs>=4.4.0
:: kdemod-kdesdk-common: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdesdk-common: requires kdemod-kdepimlibs>=4.4.0
:: kdemod-kdetoys-common: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdeutils-doc: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-kdf: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-kfloppy: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-ktimer: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-okteta: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-printer-applet: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-superkaramba: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-sweeper: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdewebdev-common: requires kdemod-kdepimlibs>=4.4.0
:: qimageblitz: requires qt>=4.4.3
:: qscintilla: requires qt
:: qtmod-doc: requires qtmod=4.6.2
:: qtmod-phonon-gstreamer: requires qtmod-phonon>=4.3.80
:: qtmod-phonon-mplayer: requires qtmod-phonon>=
:: vlc: requires qt
If i try the previous Rsu version again i get the same as the first example I showed.
Do you think it's poosible i have to re-install kdemod first then proceed to uninstall everything?
Last edited by trusktr (2010-03-24 22:33:08) -
[SOLVED] Pacman -Syu not working from chroot
Hey all, after an update today I accidentally broke something - I googled the error message on my Ubuntu install and it sent me to the pacman Arch Wiki page, at the very bottom -
pacman wrote:Q: After updating my system, I get a "unable to find root device" error after rebooting and my system will no longer boot.
A: Most likely your initramfs got broken during a kernel update (inproper use of pacman's --force option can be a cause). Use the below procedure in order to restore it.
Boot from a Arch live-cd. Once booted, run:
# mkdir /mnt/arch
# mount /dev/sdx /mnt/arch (your root partition)
# cd /mnt/arch
# mount -t proc proc proc/
# mount -t sysfs sys sys/
# mount -o bind /dev dev/
# mount /dev/sdx boot/ (your /boot partition)
# chroot . /bin/bash
# pacman -Syu
# pacman -S udev
# pacman -S mkinitcpio
# mkinitcpio -p linux
Afterwards, unmount and reboot.
OK, so i followed those instructions, however when I got to doing pacman -Syu I get a string of errors:
pacman -Syu wrote::: Synchronising package databases...
error: failed retrieving file 'xorg110.db' from catalyst.apocalypsus.net : Could not resolve host: catalyst.apocalypsus.net; Unknown error
error: failed to update xorg110 (download library error)
error: failed retrieving file 'core.db' from mirror.bytemark.co.uk : Could not resolve host: mirror.bytemark.co.uk; Unknown error
error: failed retrieving file 'core.db' from archlinux.mirrors.uk2.net : Could not resolve host: archlinux.mirrors.uk2.net; Unknown error
error: failed retrieving file 'core.db' from mirror.cinosure.com : Could not resolve host: mirror.cinosure.com; Unknown error
error: failed retrieving file 'core.db' from mirror.lividpenguin.com : Could not resolve host: mirror.lividpenguin.com; Unknown error
error: failed to update core (download library error)
error: failed retrieving file 'extra.db' from mirror.bytemark.co.uk : Could not resolve host: mirror.bytemark.co.uk; Unknown error
error: failed retrieving file 'extra.db' from archlinux.mirrors.uk2.net : Could not resolve host: archlinux.mirrors.uk2.net; Unknown error
error: failed retrieving file 'extra.db' from mirror.cinosure.com : Could not resolve host: mirror.cinosure.com; Unknown error
error: failed retrieving file 'extra.db' from mirror.lividpenguin.com : Could not resolve host: mirror.lividpenguin.com; Unknown error
error: failed to update extra (download library error)
error: failed retrieving file 'community.db' from mirror.bytemark.co.uk : Could not resolve host: mirror.bytemark.co.uk; Unknown error
error: failed retrieving file 'community.db' from archlinux.mirrors.uk2.net : Could not resolve host: archlinux.mirrors.uk2.net; Unknown error
error: failed retrieving file 'community.db' from mirror.cinosure.com : Could not resolve host: mirror.cinosure.com; Unknown error
error: failed retrieving file 'community.db' from mirror.lividpenguin.com : Could not resolve host: mirror.lividpenguin.com; Unknown error
error: failed to update community (download library error)
error: failed retrieving file 'multilib.db' from mirror.bytemark.co.uk : Could not resolve host: mirror.bytemark.co.uk; Unknown error
error: failed retrieving file 'multilib.db' from archlinux.mirrors.uk2.net : Could not resolve host: archlinux.mirrors.uk2.net; Unknown error
error: failed retrieving file 'multilib.db' from mirror.cinosure.com : Could not resolve host: mirror.cinosure.com; Unknown error
error: failed retrieving file 'multilib.db' from mirror.lividpenguin.com : Could not resolve host: mirror.lividpenguin.com; Unknown error
error: failed to update multilib (download library error)
error: failed retrieving file 'archlinuxfr.db' from repo.archlinux.fr : Could not resolve host: repo.archlinux.fr; Unknown error
error: failed to update archlinuxfr (download library error)
error: failed to synchronise any databases
error: failed to init transaction (download library error)
I've tried pacman -Syy (Returns the same errors) So I'm not sure what to do after that...
Any help to get me back on Arch is appreciated, Ubuntu's too slow!
Last edited by Reded (2012-03-27 02:06:38)The first one -
I can ping 8.8.8.8 but not any of the pacman mirrors.
ping mirrors.kernel.org wrote:ping: unknown host mirrors.kernel.org
ping 8.8.8.8 wrote:PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_req=1 ttl=54 time=54.3 ms
cat /etc/resolv.conf wrote:# Generated by dhcpcd
# /etc/resolv.conf.head can replace this line
# /etc/resolv.conf.tail can replace this line
The second thread said his rc.conf file was on static not dhcp - Mine doesn't have any mention of those two terms in it.
EDIT:
Well I can't boot into my Arch install so I've not really got a choice other than chroot And I've tried it a few times with no result.
Last edited by Reded (2012-03-26 19:16:41) -
I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?
Contact your mail provider and get the CORRECT settings for the outgoing server to set up on your phone.
-
Solved rEFInd does not work after update
Hello.
Today, I updated rEFInd with yaourt.
After the update, I copied the new files in /boot/efi.
I rebooted and now rEFInd does not work.
The only message I got is:
rEFInd - Initializing
After 2-3 minutes, the computer reboots and I got the same error message.
To boot, I had to use the UEFI shell.
First of all, is there a log file for rEFInd?
It is not easy at all to debug it when we don't have any error messages.
After that, I did the procedure to install rEFInd in /boot/efi twice without any success.
Do you know what to do to solve my problem?
Thanks for your help.
Last edited by antoyo (2012-11-07 23:29:55)@antoyo: The old one is compiled using gnu-efi-libs, the new one is compiled using Tianocore UDK2010.
Full package: http://dl.dropbox.com/u/9710721/refind- … pkg.tar.xz
Src package: http://dl.dropbox.com/u/9710721/refind- … src.tar.gz (will compile only in x86_64 system) -
[SOLVED] luks-passphrase not working after update
SOLVED: Hard drive was damaged. new hard drive ''fixed'' issue
Hello,
i updated my arch on 2015-06-05. After restarting my cryptsetup does not accept my password anymore.
No key available with this passphrase.
Searching the forum i found a couple of simular topics, nevertheless none of them offered a solution to the problem:
https://bbs.archlinux.org/viewtopic.php?id=169408
https://bbs.archlinux.org/viewtopic.php?id=175737
https://bbs.archlinux.org/viewtopic.php?id=148562
So the solutions that did not work so far:
1. Downgrading cryptsetup package
2. Downgrading kbd package
3. Checked that my keyboard works just fine (both in grub and in live system)
4. Manualy loading the aes modules in live system to ensure correct decryption (found that issue somewhere...)
Unfortunatly i did not backup the luks header file.
So i don't know if there is some other way to check if the header is broken or how to find out why it will not decrypt my disk.
I am happy for any solutions or ideas
Regards,
Some outputs from cryptsetup:
cryptsetup -v isLuks /dev/sda2
Command successful.
cryptsetup -v luksDump /dev/sda2
LUKS header information for /dev/sda2
Version: 1
Cipher name: aes
Cipher mode: xts-plain64
Hash spec: sha512
Payload offset: 4096
MK bits: 512
MK digest: 66 00 4c 66 17 ec 2c 82 68 b3 26 2e 58 df 76 cf 3b f5 18 ef
MK salt: b8 e0 5d 4d 5c bb 23 6a fc fc 86 d8 5d b6 3f 1f
28 b6 0e 49 33 9a 8b e6 a2 55 f5 42 32 92 95 db
MK iterations: 51000
UUID: dbe69743-7753-4a54-a221-a662042c0444
Key Slot 0: ENABLED
Iterations: 204146
Salt: fa 22 ec 71 49 2c af 9f 64 10 b3 8e f4 76 31 c0
02 16 dd 2c 72 7e 2f 4b 0b 08 2f 02 03 dd 52 dc
Key material offset: 8
AF stripes: 4000
Key Slot 1: DISABLED
Key Slot 2: DISABLED
Key Slot 3: DISABLED
Key Slot 4: DISABLED
Key Slot 5: DISABLED
Key Slot 6: DISABLED
Key Slot 7: DISABLED
Command successful.
Last edited by Fleeep (2015-06-14 12:09:24)losetup --read-only /dev/loop7 /dev/sda2
dmsetup create foobar --table '0 2048 crypt aes-xts-plain64 4ec1a210c7c44208ca132559cda338d7651471abd47b619b1d3a15d273ab69875cdd2bcb7c2750f6cab9e6b2e19f487fb4766bb7826819c8b2de898fe3c0b999 0 7:7 4096'
file -s -L /dev/mapper/foobar
hexdump -C /dev/mapper/foobar
Gives me the master key for the decrypted partition (denoted as forum_key_kex).
Do i need to convert this to binary or something to use it...?
Assume Filesystem/dev_sda2 is the partition to decrypt.
So to decrypt the partition directly with master key i have to do one of the following, wasn't sure which hash to take...:
echo "0 `blockdev --getsz Filesystem/dev_sda2` crypt aes-cbc-essiv:sha256 `echo SomeEncrypt | sha256sum | head -c 64` 0 Filesystem/dev_sda2 4096" | dmsetup create luks_volume
echo "0 `blockdev --getsz Filesystem/dev_sda2` crypt aes-cbc-essiv:sha256 `sha256sum forum_key_hex | head -c 64` 0 Filesystem/dev_sda2 4096" | dmsetup create luks_volume
as i found on:
http://unix.stackexchange.com/questions … master-key
(approved by you in the comment as it seems)
But both give me an error:
device-mapper: resume ioctl on luks_volume failed: Invalid argument
Command failed
Did i even do this right?
Also when i copied the partition to an external device dd_rescue observed 6 errors in blocks. So those might just be the cause of failure all the time. -
[Solved] Pacman no longer works at all!!
Ok, did some searches and found a few hits, but not really sure how to fix this one. Here are 2 links I found.
links:
http://unix.stackexchange.com/questions … -libraries
https://bbs.archlinux.org/viewtopic.php?pid=1232052
In my case, I dont think any pacman option/command works. Cant run 'pacman' with ANY options or with no options??
error:
$ pacman
pacman: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
I guess I was updating something using curl libraries, but not sure whats the best way to fix this.
ldconfig -p | grep curl
Returns nothing.
Not sure if this was the right thing to do but I also tried this from the first link.
echo /usr/local/lib | sudo tee -a /etc/ld.so.conf.d/local.conf
Here is another one:
$ sudo ldd $(which pacman)
linux-vdso.so.1 (0x00007fff4a3ff000)
libalpm.so.7 => /usr/lib/libalpm.so.7 (0x00007f16be091000)
libc.so.6 => /usr/lib/libc.so.6 (0x00007f16bdce4000)
libcurl.so.4 => not found
libgpgme.so.11 => /usr/lib/libgpgme.so.11 (0x00007f16bdab1000)
libarchive.so.12 => /usr/lib/libarchive.so.12 (0x00007f16bd81c000)
libcrypto.so.1.0.0 => /usr/lib/libcrypto.so.1.0.0 (0x00007f16bd412000)
/lib/ld-linux-x86-64.so.2 (0x00007f16be2bd000)
libassuan.so.0 => /usr/lib/libassuan.so.0 (0x00007f16bd202000)
libgpg-error.so.0 => /usr/lib/libgpg-error.so.0 (0x00007f16bcfff000)
libacl.so.1 => /usr/lib/libacl.so.1 (0x00007f16bcdf6000)
libattr.so.1 => /usr/lib/libattr.so.1 (0x00007f16bcbf1000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0x00007f16bc9c7000)
liblzma.so.5 => /usr/lib/liblzma.so.5 (0x00007f16bc7a4000)
libbz2.so.1.0 => /usr/lib/libbz2.so.1.0 (0x00007f16bc594000)
libz.so.1 => /usr/lib/libz.so.1 (0x00007f16bc37e000)
libdl.so.2 => /usr/lib/libdl.so.2 (0x00007f16bc17a000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007f16bbf5e000)
So looks like thats the issue .. libcurl.so.4 => not found ...
I dont have strace installed and not sure if I need it to continue....I did a quick search and dont see a libcurl installed, so either i need to install it or remove that reference too it? LOL
Any suggestions?
Last edited by banshee28 (2013-02-19 03:28:09)Army wrote:Show us what you did with pacman which caused this = show us your /var/log/pacman.log. Do you use testing repos?
Never use testing repos.
I dont see anything for libcurl in that log, but I did see this recently for curl. Perhaps this is the culprit. Pacman -Sc ??
[2013-02-07 03:05] Running 'pacman -Sc --noconfirm'
[2013-02-08 03:05] Running 'pacman -Sc --noconfirm'
[2013-02-08 17:19] Running 'pacman -Sy'
[2013-02-08 17:19] synchronizing package lists
[2013-02-08 17:19] starting full system upgrade
[2013-02-08 17:19] Running 'pacman -S -u'
[2013-02-08 17:19] starting full system upgrade
[2013-02-08 17:21] upgraded perl (5.16.2-2 -> 5.16.2-3)
[2013-02-08 17:21] upgraded openssl (1.0.1.c-1 -> 1.0.1.d-1)
***** [2013-02-08 17:21] upgraded curl (7.28.1-1 -> 7.29.0-1) *******
Full log file:
[2012-09-22 09:01] installed filesystem (2012.8-1)
[2013-02-11 20:12] ------------------------------------------------------------------------
[2013-02-11 20:12] upgraded profile-sync-daemon (5.13-1 -> 5.16-1)
[2013-02-12 03:05] Running 'pacman -Sc --noconfirm'
[2013-02-12 18:19] Running 'pacman -Sy'
[2013-02-12 18:19] synchronizing package lists
[2013-02-12 18:19] starting full system upgrade
[2013-02-12 18:19] Running 'pacman -S -u'
[2013-02-12 18:19] starting full system upgrade
[2013-02-12 18:20] upgraded device-mapper (2.02.98-1 -> 2.02.98-3)
[2013-02-12 18:20] upgraded cryptsetup (1.5.1-1 -> 1.6.0-1)
Last edited by banshee28 (2013-02-19 03:29:37) -
Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
Running the following brings back the sound, but that is obviously a hack:
fuser -k /dev/snd/*
rmmod snd_hda_intel
modprobe snd_hda_intel
/etc/rc.d/alsa start
I have on my /etc/modprobe/50-sound.conf:
options snd-hda-intel model=laptop
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
Here's the exact hardware specification:
# lspci -nnv|grep Audio
80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Any idea where to look for this?
Last edited by yhager (2009-08-21 16:54:00)[SOLVED]
I downgraded to kernel 2.6.29 and the problem is gone.
Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29. -
[SOLVED] DVB-T Not working with 2.6.30
Hey, I just upgraded to 2.6.30 and my DVB-T card (TerraTec Piranha) which uses the siano driver doesn't work anymore.
It worked fine before the upgrade but doesn't register any DVB-T device since the reboot after the upgrade (Atleast kaffeine doesn't show the DVB-T button and dmesg doesn't list that a new device was registered).
After starting my computer:
[fox@PC103 ~]$ dmesg | grep sms
smsusb_probe: line: 416: rom interface 0 is not used
usb 4-2: firmware: requesting sms1xxx-stellar-dvbt-01.fw
smsusb1_load_firmware: failed to open "sms1xxx-stellar-dvbt-01.fw" mode 4, trying again with default firmware
usbcore: registered new interface driver smsusb
dmesg after reconnecting the stick:
eth0: no IPv6 routers present
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
smsusb_onresponse: line: 69: error, urb status -84, 0 bytes
usb 4-2: USB disconnect, address 3
usb 4-2: new full speed USB device using uhci_hcd and address 4
usb 4-2: configuration #1 chosen from 1 choice
smsusb_probe: line: 416: rom interface 0 is not used
usb 4-2: firmware: requesting sms1xxx-stellar-dvbt-01.fw
smsusb1_load_firmware: failed to open "sms1xxx-stellar-dvbt-01.fw" mode 4, trying again with default firmware
usb 4-2: firmware: requesting dvbt_bda_stellar_usb.inp
usb 4-2: USB disconnect, address 4
usb 4-2: new full speed USB device using uhci_hcd and address 5
usb 4-2: configuration #1 chosen from 1 choice
The file "dvbt_bda_stellar_usb.inp" exists in "/lib/firmware/" and seems to be used fine
Unluckily enough I don't know what the log looked like before the upgrade.
Whats wrong? How do I get DVB-T working again?
//Edit:
[fox@PC103 ~]$ sudo modprobe smsdvb
did the trick!
- Shouldn't this be done by default?!
PS / Not related to topic: While I'm at it, how could I fix this: "WARNING: All config files need .conf: /etc/modprobe.d/framebuffer_blacklist.pacsave, it will be ignored in a future release." - I get it about twenty times at startup since some time.
//Edit:
Fixed by removing the file and using framebuffer_blacklist.conf instead
Last edited by JayFoxRox (2009-06-24 16:12:31)Hiya, I was having the identical problem with an Acer AspireOne D250 netbook using the atl1c kernel mod. The Arch Wiki entry for my netbook specifically has a workaround posted, though I believe it's applicable here:
http://wiki.archlinux.org/index.php/Ace … e_D250_LAN
With Archlinux 2009.08 the installation did not work from the beginning on an Aspire One D250. The LAN was not working properly. This could be traced down to the Kernel 2.6.30 which had broken network drivers. To get the LAN working, use the Archlinux core install. After installing Archlinux, get the Kernel 2.6.31 and the Kernel Headers on a USB stick and install it via "pacman -U". After rebooting, the LAN should work properly.
Hope this helps! -
[SOLVED] Rosgarden package not working
Hi everybody,
it's my first post here, so I hope I get all things done.
I installed the new version of Rosegarden (10.02; i686 architecture) for the first time yesterday evening. I wanted to check out its features.
Rosegarden's package information:
http://www.archlinux.org/packages/extra … osegarden/
I usually start programs via the Bash. But when starting Rosegarden this error occurs:
[user@asterix ~]$ rosegarden
rosegarden: symbol lookup error: rosegarden: undefined symbol: _ZN9QListData7detach3Ev
It seems that there's something (a package?!?) missing.
I installed Rosegarden with Pacman:
[2010-02-15 19:37] synchronizing package lists
[2010-02-15 19:41] installed liblrdf (0.4.0-6)
[2010-02-15 19:41] installed liblo (0.26-1)
[2010-02-15 19:41] installed dssi (1.0.0-3)
[2010-02-15 19:41] installed rosegarden (10.02-1)
According to Rosegarden's package information the following packages are required (the missing one were installed by Pacman itself; in brackets the installed version):
- fftw (3.2.2-1)
- qt (4.5.3-4)
- liblrdf (0.4.0-6)
- dssi (1.0.0-3)
- ladspa (1.13-2)
- liblo (0.26-1)
- lirc-utils (0.8.6-3)
- shared-mime-info (0.71-1)
I've searched for previous errors:
http://bbs.archlinux.org/viewtopic.php?id=82791
There's no relation to my problem.
It would be great if someone has a clue what to do. I hope all necessary information were mentioned.
Thanks.
Last edited by Schwefelsaeure (2010-02-17 23:20:30)Hi,
sorry for my late reply, but I was busy the all day long.
Thank you 'drcouzelis' for the tip to build Rosegarden on my own (with ABS).
The building process took a while on my old AMD Athlon XP 1900+ but it works now.
Unfortunately I don't know what went wrong before. It's the first package (within Pacman) which does not work since I've been using Arch Linux (about three years now).
Arch Linux is a great distribution with a great and helpful community.
Thanks for support. -
[SOLVED] Touchpad Synaptics not works after last update of xf86-input
after this packages
xf86-input-synaptics 1.8.0-2 <<< works
xf86-input-synaptics 1.8.0-3 << not works
https://projects.archlinux.org/svntogit … 54796cff46
dmesg|grep input
[ 0.866883] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.842679] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:04F3:0103.0001/input/input2
[ 1.842756] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-1/input0
[ 1.843934] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:04F3:0103.0002/input/input3
[ 1.844001] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:14.0-1/input1
[ 2.169742] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:09DA:9066.0003/input/input4
[ 2.169933] hid-generic 0003:09DA:9066.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-2/input0
[ 2.171262] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:09DA:9066.0004/input/input5
[ 2.171357] hid-generic 0003:09DA:9066.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-2/input1
[ 10.099521] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 10.099624] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 10.099692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 10.398671] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 11.840489] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 12.211308] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input11
[ 12.212530] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 13.254950] sound hdaudioC0D0: inputs:
[ 13.580490] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input13
[ 13.580985] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 13.581106] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 13.581224] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 17.274881] input: WebCam SC-13HDL11939N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17
journalctl -b |grep input
ago 21 09:02:37 drog-laptop kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ago 21 09:02:37 drog-laptop kernel: input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:04F3:0103.0001/input/input2
ago 21 09:02:37 drog-laptop kernel: hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-1/input0
ago 21 09:02:37 drog-laptop kernel: input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:04F3:0103.0002/input/input3
ago 21 09:02:37 drog-laptop kernel: hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:14.0-1/input1
ago 21 09:02:37 drog-laptop kernel: input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:09DA:9066.0003/input/input4
ago 21 09:02:37 drog-laptop kernel: hid-generic 0003:09DA:9066.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-2/input0
ago 21 09:02:37 drog-laptop kernel: input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:09DA:9066.0004/input/input5
ago 21 09:02:37 drog-laptop kernel: hid-generic 0003:09DA:9066.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-2/input1
ago 21 09:02:40 drog-laptop kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
ago 21 09:02:40 drog-laptop kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ago 21 09:02:40 drog-laptop kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ago 21 09:02:41 drog-laptop kernel: input: PC Speaker as /devices/platform/pcspkr/input/input9
ago 21 09:02:42 drog-laptop kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
ago 21 09:02:42 drog-laptop kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input11
ago 21 09:02:42 drog-laptop kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
ago 21 09:02:43 drog-laptop kernel: sound hdaudioC0D0: inputs:
ago 21 09:02:44 drog-laptop kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input13
ago 21 09:02:44 drog-laptop kernel: input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
ago 21 09:02:44 drog-laptop kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
ago 21 09:02:44 drog-laptop kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
ago 21 09:02:47 drog-laptop kernel: input: WebCam SC-13HDL11939N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17
ago 21 09:02:52 drog-laptop acpid[589]: starting up with netlink and the input layer
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event7 (Power Button)
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event11 (Video Bus)
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event10 (Video Bus)
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event6 (Power Button)
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event5 (Lid Switch)
cat /usr/share/X11/xorg.conf.d/50-synaptics.conf
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
Option "SecondarySoftButtonAreas" "58% 0 0 8% 42% 58% 0 8%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ HID 04f3:0103 id=11 [slave pointer (2)]
⎜ ↳ A4TECH USB Device id=12 [slave pointer (2)]
⎜ ↳ A4TECH USB Device id=13 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=16 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Power Button id=9 [slave keyboard (3)]
↳ HID 04f3:0103 id=10 [slave keyboard (3)]
↳ WebCam SC-13HDL11939N id=14 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=15 [slave keyboard (3)]
synclient
Couldn't find synaptics properties. No synaptics driver loaded?
lsmod
Module Size Used by
bbswitch 12878 0
nls_iso8859_1 12461 1
nls_cp437 16553 1
vfat 21231 1
fat 61984 1 vfat
fuse 87446 5
uvcvideo 78952 0
videobuf2_vmalloc 12816 1 uvcvideo
ath3k 12685 0
videobuf2_memops 12519 1 videobuf2_vmalloc
videobuf2_core 47787 1 uvcvideo
ecb 12737 1
v4l2_common 12995 1 videobuf2_core
btusb 25625 0
bluetooth 394557 3 ath3k,btusb
videodev 126443 3 uvcvideo,v4l2_common,videobuf2_core
media 18365 2 uvcvideo,videodev
6lowpan_iphc 16588 1 bluetooth
snd_hda_codec_hdmi 45117 1
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
nvram 13034 0
joydev 17063 0
mousedev 17272 0
ipt_REJECT 12465 1
xt_comment 12427 2
arc4 12536 2
xt_LOG 17156 5
ath9k 94538 0
ath9k_common 21746 1 ath9k
ath9k_hw 403753 2 ath9k_common,ath9k
ath 26067 3 ath9k_common,ath9k,ath9k_hw
mac80211 514630 1 ath9k
r8169 68119 0
mii 12675 1 r8169
cfg80211 454161 4 ath,ath9k_common,ath9k,mac80211
snd_hda_intel 26327 4
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
i915 864723 4
drm_kms_helper 49262 1 i915
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
coretemp 12820 0
hwmon 12930 1 coretemp
led_class 12859 1 ath9k
intel_rapl 17356 0
rfkill 18867 3 cfg80211,bluetooth
x86_pkg_temp_thermal 12951 0
psmouse 102792 0
drm 258005 6 i915,drm_kms_helper
intel_powerclamp 17122 0
kvm_intel 143217 0
snd_timer 26614 1 snd_pcm
shpchp 35210 0
lpc_ich 20768 0
mei_me 17941 0
intel_gtt 17848 1 i915
kvm 413027 1 kvm_intel
crct10dif_pclmul 13394 0
crc32_pclmul 12915 0
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
cryptd 18553 1 ghash_clmulni_intel
microcode 22061 0
evdev 21544 29
pcspkr 12595 0
mac_hid 12633 0
i2c_algo_bit 12744 1 i915
i2c_i801 16965 0
mei 75033 1 mei_me
serio_raw 12849 0
i2c_core 50152 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
tpm_tis 17134 0
thermal 17559 0
fan 12681 0
battery 13356 0
snd 69340 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore 13031 2 snd,snd_hda_codec
tpm 31467 1 tpm_tis
video 17995 1 i915
button 12909 1 i915
processor 27777 0
xt_limit 12601 7
wmi 17339 0
ac 12715 0
xt_tcpudp 12527 11
xt_addrtype 12557 4
nf_conntrack_ipv4 17706 7
nf_defrag_ipv4 12483 1 nf_conntrack_ipv4
xt_conntrack 12681 7
ip6_tables 26025 0
nf_conntrack_netbios_ns 12445 0
nf_conntrack_broadcast 12365 1 nf_conntrack_netbios_ns
nf_nat_ftp 12460 0
nf_nat 22338 1 nf_nat_ftp
nf_conntrack_ftp 16783 1 nf_nat_ftp
nf_conntrack 87324 7 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4
iptable_filter 12536 1
ip_tables 26011 1 iptable_filter
x_tables 27104 10 xt_comment,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ipt_REJECT,ip6_tables,xt_addrtype
ext4 497695 2
crc16 12343 2 ext4,bluetooth
mbcache 17171 1 ext4
jbd2 86460 1 ext4
hid_generic 12393 0
usbhid 44507 0
hid 102220 2 hid_generic,usbhid
sd_mod 44356 5
sr_mod 21903 0
cdrom 47479 1 sr_mod
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_pclmul,crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ahci 29195 4
libahci 27158 1 ahci
libata 181553 2 ahci,libahci
ehci_pci 12512 0
scsi_mod 142915 3 libata,sd_mod,sr_mod
xhci_hcd 152990 0
ehci_hcd 69939 1 ehci_pci
usbcore 199328 7 ath3k,btusb,uvcvideo,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 12440 1 usbcore
i8042 18002 1 libps2
serio 18282 6 serio_raw,atkbd,i8042,psmouse
EDIT:
cat /var/log/Xorg.0.log| grep Synap
[ 301.566] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 301.566] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 301.566] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 301.566] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 301.566] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 301.566] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 301.566] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 301.566] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event9"
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 301.566] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 301.566] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 301.567] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 301.567] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[ 301.567] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 301.567] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 301.567] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 301.567] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 301.567] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 301.567] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 301.567] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
(EE) [dix] SynPS/2 Synaptics TouchPad: unable to find touch point 1
EDIT2:
SOLVED!
just remove /etc/X11/xorg.conf.d/10-evdev.conf
Last edited by drog (2014-08-21 13:29:49)lordheavy wrote:
X reads first configuration in /usr/share/X11/xorg.conf.d then /etc/X11/xorg.conf.d
When you copy 10-evdev.conf file into /etc/X11 you completly override previous system configuration. It's the reason copying synaptics configuration file into /etc/X11 fixes the issue
Defining default system configuration in /etc/X11 with previous xorg was a mistake, now it's fixed.
Wiki should be fixed. It's not a packaging bug, but a configuration bug.
@lordheavy
I agree with you that the new xf86-input-synaptics package is using the right configuration scheme, however it is breaking the functionality on every installed system. It was a packaging bug, which is now fixed, but it has to be handled manually by most users of previous versions. That's why I won't re-open the bug report FS#41589. Instead, I am asking here: shouldn't this change be notified to the users just like it has been done for most breaking changes on archlinux frontpage news?
By the way, thanks for your great work. -
[Solved] Picard Fingerprinting not working
After installing picard (0.12.1) it runs fine but I get this message:
W: 3074418368 21:09:37 No decoders found! Fingerprinting will be disabled.
and PUID / Fingerprinting does not work.
I believe I have all the optional dependencies installed:
libdiscid - from AUR
FFMpeg
libofa
I rebuilt with ABS, and tried the bzr version from AUR, but no luck.
Any other ideas or is this just broken?
Thanks
Last edited by jdkdonk (2009-12-01 07:36:09)Well, I seem to have fixed this, though not sure how.
Apparently some kind of dependancy problem.
I was updating (Syu) etc and got this output:
missing dependency for gstreamer0.10-bad-plugins : gstreamer0.10-bad=0.10.17
missing dependency for gstreamer0.10-bad-plugins : libdca>=0.0.5
missing dependency for gstreamer0.10-bad-plugins : libdc1394>=2.1.0
missing dependency for gstreamer0.10-bad-plugins : libcdaudio>=0.99.12
missing dependency for gstreamer0.10-bad-plugins : mjpegtools>=1.9.0
missing dependency for gstreamer0.10-bad-plugins : liblrdf>=0.4.0
missing dependency for gstreamer0.10-bad-plugins : libvdpau>=0.3
I installed these, removed x264-git, and pacman -Syu.
Not sure what fixed it but oh well. -
Solved - Helix pen not working
I think this might be helpful to those who suffer she same problem: My OS is Windows 8.1. One day the pen just stoped working. Seems that there was no problem with hardware and driver - nothing wrong but the pen. Then another day my Norton, which was pre-installed on my Helix, expired and I decided to unistall it. Surprisingly after uninstallation the pen started to work!
Tried it in the BIOS, looks like it's a hardware problem. Lenovo service was surprisingly quick and direct on the phone. They provided me the option of sending it in (with a 7 day turnaround), or taking it to a local warranty service center (on Long Island). I'll check out the local center first tomorrow.
mdovey wrote:
Try booting into BIOS and seeing if the pen works there (although the BIOS is text based it will respond to touch and pen inputs, e.g. you can select the various menus screens by touching the text with the pen).
If the pen does work in BIOS, then the problem is probably software\driver related and reinstalling\refreshing Windows should solve the problem.
If the pen does not work in BIOS, then the problem is probably hardware related and you will need to contact Lenovo support to arrange a repair\repacement.
Matthew
mdovey wrote:
Try booting into BIOS and seeing if the pen works there (although the BIOS is text based it will respond to touch and pen inputs, e.g. you can select the various menus screens by touching the text with the pen).
If the pen does work in BIOS, then the problem is probably software\driver related and reinstalling\refreshing Windows should solve the problem.
If the pen does not work in BIOS, then the problem is probably hardware related and you will need to contact Lenovo support to arrange a repair\repacement.
Matthew -
After upgrading my findutils from 4.2.33-1 to 4.4.0-1, it is not working the way it used to. I downgraded to the old one and it is working fine again. However, I am wondering why the newer version can't do what I want it to...
Typically I run the following script to apply mp3gain to my music collection (albums and individual songs):
#!/bin/bash
echo Albums...
find . -mindepth 3 -iname '*.mp3' -execdir mp3gain -k -a {} +
echo Single tracks...
find . -maxdepth 2 -iname '*.mp3' -exec mp3gain -k -r {} +
On the old version, for the albums, the "find" function works as expected by examining the entire album before applying gain. With the new findutils version, the albums are being analysed song-by-song. I suppose since the new version of findutils, there is just a different method to do what I wanted before with -execdir. Does anyone know how to do it on the new version?
Last edited by tony5429 (2008-07-19 06:29:41)Cool. Thanks for the suggestion. I ended up going with...
#!/bin/bash
echo Albums...
for album in */*
do
cd "$album" > /dev/null 2>&1
if [ $? = 0 ]
then
mp3gain -k -a *.mp3
cd ..
cd ..
fi
done
echo Single tracks...
find . -maxdepth 2 -iname '*.mp3' -exec mp3gain -k -r {} +
exit 0 -
Maybe solved pacman : could not open package: File too large
please help! i just made a PKGBUILD for Unreal Tournament 2004 (spent a lot of time on it!) now it says it can't install it. the finished file is 2.6gb. what to do? thanks much.. i want to upload it to AUR.
thanks
karstenSigi wrote:I think he wrote a PKGBUILD to install the DVD content in an "Arch friendly" way. (With the background that the linux installer apparently isn't available on every edition of the UT2k4 DVD)
exactly.. its reads the files and installs it according to Arch. how do i get pacman to not die?? thanks..
Maybe you are looking for
-
I will be traveling to Italy for the next several months and would like to purchase a laptop - thinking about the Macbook Pro bc I am a designer and need the largest screen possible/most memory and speed. #1 Do you think the Macbook Pro can handle gr
-
Acrobat Pro 9: PDF Optimizer module refuses to load...
Okay, I have a weird one... Adobe Acrobat Pro 9.06 - The PDF Optimizer module just decided to stop loading yesterday. You poll the menu item and the window does not appear. So I followed the usual protocols: I restarted - nothing. I ran a privilege f
-
Angle increments using shift key. How to set it up?
How to set up the angle increments (stops) to be used with the shift key? I need to set it up to 30 degrees increments.
-
Why do we need RESOURCE privilege!
Hi, Can any one give me the details of RESOURCE privilege, when we need to grant this and what are the settings will be provided to the user if RESOURCE is granted. Thank you in advance!
-
MBPro C2D 2.33GHz/3GB RAM drops frames playing H.264@1920x1080
I've been trying to watch with a MBPro C2D 2.33GHz/3GB RAM a movie (in .mkv container) coded in H.264@1920x1080 (a blueray rip actually), but both Quicktime (I have Perian installed) and VLC would drop frames time to time. Processor never goes over 1