[SOLVED] pacman update seems to have corrupted files!

Having just updated a server and now have an unbootable system I have just tried to update a laptop with the following result:
:: Proceed with installation? [Y/n]
:: Retrieving packages ...
libgcrypt-1.6.0-1-i686 360.1 KiB 987K/s 00:00 [##########################################] 100%
man-pages-3.56-1-any 4.7 MiB 1245K/s 00:04 [##########################################] 100%
glamor-egl-0.5.1.r256-1-i686 88.3 KiB 1337K/s 00:00 [##########################################] 100%
bind-9.9.4.P2-1-i686 1539.2 KiB 1283K/s 00:01 [##########################################] 100%
(4/4) checking keys in keyring [##########################################] 100%
error: GPGME error: Invalid crypto engine
error: GPGME error: Invalid crypto engine
error: GPGME error: Invalid crypto engine
error: GPGME error: Invalid crypto engine
(4/4) checking package integrity [##########################################] 100%
error: GPGME error: Invalid crypto engine
error: GPGME error: Invalid crypto engine
error: GPGME error: Invalid crypto engine
error: GPGME error: Invalid crypto engine
error: bind: missing required signature
:: File /var/cache/pacman/pkg/bind-9.9.4.P2-1-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: glamor-egl: missing required signature
:: File /var/cache/pacman/pkg/glamor-egl-0.5.1.r256-1-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: libgcrypt: missing required signature
:: File /var/cache/pacman/pkg/libgcrypt-1.6.0-1-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: man-pages: missing required signature
:: File /var/cache/pacman/pkg/man-pages-3.56-1-any.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I am now really worried that the server I updated and no longer boots has corrupted kernel.
Last edited by mcloaked (2014-01-13 20:34:49)

Scimmia wrote:Did you update everything that uses gcrypt without updating libgcrypt? If so, see my reply here: https://bbs.archlinux.org/viewtopic.php?id=175639
I did - on the laptop it seems OK but I have not rebooted it.

Similar Messages

[Solved] Recent update seems to have broke automount in XFCE

I seem to have managed to break my removable storage support. It had been working since installation several months ago. I have made no modifications to anything in /etc other than those that would be performed by package updates.
Tried copying /etc/skel/.xinitrc to ~/ and added exec dbus-launch ck-launch-session startxfce4.
Checked output of groups to ensure I'm in the storage group.
Checked for presence of org.freedesktop.udisks.pkla:
[Local Users]
#Identity=unix-user: your_username
Identity=unix-group:storage
Action=org.freedesktop.udisks.*
ResultAny=yes
ResultInactive=no
ResultActive=yes
System updates from the last week from /var/log/pacman.log:
[2011-10-11 19:47] Running 'pacman -Syu'
[2011-10-11 19:47] synchronizing package lists
[2011-10-11 19:47] starting full system upgrade
[2011-10-11 19:48] upgraded empathy (3.2.0-1 -> 3.2.0.1-1)
[2011-10-11 19:48] upgraded gtksourceview3 (3.2.0-1 -> 3.2.1-1)
[2011-10-11 19:48] upgraded imagemagick (6.7.2.8-1 -> 6.7.3.0-1)
[2011-10-11 19:48] upgraded libass (0.9.13-1 -> 0.10.0-1)
[2011-10-11 19:48] upgraded mpfr (3.1.0-2 -> 3.1.0.p1-1)
[2011-10-11 19:48] upgraded shared-mime-info (0.90-1 -> 0.91-1)
[2011-10-11 19:48] upgraded transmission-gtk (2.41-1 -> 2.41-2)
[2011-10-11 20:02] Running 'pacman -S --asdeps xmlto docbook-xsl'
[2011-10-11 20:02] installed perl-yaml-syck (1.17-2)
[2011-10-11 20:02] installed perl-test-pod (1.44-1)
[2011-10-11 20:02] installed xmlto (0.0.24-1)
[2011-10-11 20:02] installed docbook-xsl (1.76.1-1)
[2011-10-12 21:41] Running 'pacman -S gnome-bluetooth'
[2011-10-12 21:41] Running 'pacman -Syu'
[2011-10-12 21:41] synchronizing package lists
[2011-10-12 21:41] starting full system upgrade
[2011-10-12 21:48] upgraded amule (10624-1 -> 10645-1)
[2011-10-12 21:48] upgraded farsight2 (0.0.29-1 -> 0.0.31-1)
[2011-10-12 21:48] upgraded libsasl (2.1.23-7 -> 2.1.23-8)
[2011-10-12 21:48] upgraded systemd (36-1 -> 37-1)
[2011-10-12 21:48] upgraded systemd-arch-units (20110902-1 -> 20111011-1)
[2011-10-12 21:48] upgraded telepathy-glib (0.15.7-1 -> 0.15.9-1)
[2011-10-12 21:48] upgraded xf86-input-evdev (2.6.0-3 -> 2.6.0-4)
[2011-10-12 21:48] upgraded xf86-input-synaptics (1.4.1-1 -> 1.5.0-1)
[2011-10-12 21:48] upgraded xf86-video-intel (2.15.0-2 -> 2.16.0-1)
[2011-10-12 21:48] upgraded xkeyboard-config (2.2.1-1 -> 2.4.1-1)
[2011-10-12 21:48] upgraded xorg-server-common (1.10.4-1 -> 1.11.1-2)
[2011-10-12 21:48] upgraded xorg-server (1.10.4-1 -> 1.11.1-2)
[2011-10-12 21:48] upgraded xorg-xinit (1.3.0-3 -> 1.3.1-1)
[2011-10-14 16:04] Running 'pacman -Syu'
[2011-10-14 16:04] synchronizing package lists
[2011-10-14 16:04] starting full system upgrade
[2011-10-14 16:04] upgraded coreutils (8.13-2 -> 8.14-1)
[2011-10-14 16:04] warning: directory permissions differ on var/lock/
filesystem: 755 package: 1777
[2011-10-14 16:04] upgraded filesystem (2011.08-1 -> 2011.10-1)
[2011-10-14 16:04] upgraded mkinitcpio (0.7.3-1 -> 0.7.4-1)
[2011-10-15 10:35] Running 'pacman -Syu'
[2011-10-15 10:35] synchronizing package lists
[2011-10-15 10:35] starting full system upgrade
[2011-10-15 10:35] upgraded nettle (2.2-1 -> 2.4-1)
[2011-10-15 10:35] upgraded gnutls (3.0.3-1 -> 3.0.4-1)
[2011-10-15 10:35] upgraded inetutils (1.8-5 -> 1.8-6)
[2011-10-15 10:35] upgraded laptop-mode-tools (1.59-1 -> 1.60-1)
[2011-10-17 08:08] Running 'pacman -Syu'
[2011-10-17 08:08] synchronizing package lists
[2011-10-17 08:08] starting full system upgrade
[2011-10-17 08:08] upgraded gnutls (3.0.4-1 -> 3.0.4-2)
[2011-10-17 08:08] upgraded hyphen (2.7.1-2 -> 2.8.3-1)
[2011-10-17 08:08] upgraded imagemagick (6.7.3.0-1 -> 6.7.3.1-1)
[2011-10-17 08:08] upgraded iso-codes (3.14-1 -> 3.29-1)
[2011-10-17 08:08] upgraded libpulse (1.0-3 -> 1.0-4)
[2011-10-17 08:08] upgraded man-pages (3.32-1 -> 3.35-1)
[2011-10-17 08:09] upgraded pulseaudio (1.0-3 -> 1.0-4)
[2011-10-17 08:09] upgraded syslog-ng (3.2.4-3 -> 3.3.1-1)
[2011-10-17 08:09] upgraded telepathy-glib (0.15.9-1 -> 0.16.0-1)
[2011-10-17 09:09] Running 'pacman -S consolekit'
[2011-10-17 09:09] upgraded consolekit (0.4.5-1 -> 0.4.5-1)
[2011-10-17 09:09] Running 'pacman -S gvfs-afc'
[2011-10-17 09:09] installed gvfs-afc (1.10.0-2)
[2011-10-17 09:09] Running 'pacman -Rsn gvfs-afc'
[2011-10-17 09:09] removed gvfs-afc (1.10.0-2)
Edit:
Installed gvfs-afc and edited order on xinitrc to ck-launch-session dbus-launch startxfce4. Seems to work.
Never had to worry about any of these before though
Last edited by android_808 (2011-10-17 08:57:25)

Hi,
I automount four NFS mounts from my ubuntu server through /etc/fstab. This used to work perfectly. Until the latest filesystem update. The removable devices do not get mounted. They do not appear in Nautilus. But when I plug in a USB, they all get activated.
Anyway, I will try your solution.
Regards,
Alexander

[SOLVED] recent update seems to have broken my keyboard

hi guys.
i've just turned on my arch 64 system after updating last night (or possibly the day before...) and when i get to the gdm login the keyboard doesnt work. I can confirm the problem is not with the keyboard itself as i can still edit the boot options in grub. anyone else have this or have i broken something...
thanks in advance,
david
(edit: on screen keyboard doesnt seem to be working either)
Last edited by dinkydarko (2010-04-08 08:12:11)

dinkydarko wrote:hald wouldnt make a difference to the one screen keyboard in gdm would it? is there an easy way to check if its running?
I could be wrong, but my understanding is hal would be needed as soon as X starts - so yes it could affect login with gdm. That would also fit with it not working in slim or starting xterm.
If you're pretty sure it's related to the updates it might be helpful to post the parts of pacman.log that are relevant so we can see what exactly got updated.

I have songs on iTunes that seem to have corrupted files with time. The songs play for a while then suddenly stop mid-song and iTunes goes to the next song. On my iPod the playback pauses for a few seconds then picks up again.

Some of these songs were purchased via iTunes. I would like to download them again but the Download buttons are grayed out when I bring up the purchased songs listing. Any help appreciated. Is there any way to quickly get a file integrity check done?
Kerry

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those incomplete tracks from your iTunes library and redownload them (if they are still in your country's store) via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes. Or delete them and copy them back (File > Add To Library) from your backup of your downloads/library.

[solved] pacman update error

A few days ago I attempted to update my system, and am consistently getting this error:
$ sudo pacman -Su
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (package filename is not valid)
The problem is that this is all it gives me; even a pacman -Svu gives no more information than this. How can I identify the package that's causing the fault short of testing each installed package individually?
Last edited by beretta (2011-01-25 19:32:02)

A pacman -Syy seems to have done the trick, thank you!
Not sure exactly what caused the problem, but I was able to get the system updated. I'm always impressed with how quickly this community jumps in to help; thanks to all of you. I even learned some new tricks through all of this.

Illustrator crashing after 16.0.1update, 16.0.2 update seems to have fixed it

I am running win7 with latest updates, running Illustrator (64-bit) from CS6 Web and Design Premium Suite.
Illustrator crashed 6 times this week after installing the updates from the end of last week (update 16.0.1). The updates that were released today seem to have fixed it, although I cannot absolutely confirm this.
I have spent the past hour trying to break the software doing the same tasks that caused crashes earlier this week, and then far more extreme tasks then I would ever actually do or need to do, and have not been able to recreate the same crash problems.
I have been using Illustrator for nearly 15 years, it's been very rare that I've ever experienced an illustrator crash like what was happening after the 16.0.1 update. I didn't have time to troubleshoot the issue until today, fortunately the 16.0.2 update seems to have resolved the issue. If the issue returns I will follow up with another post - it's rare though that I find an article that says "I've had this problem, but it looks like you fixed it". Thank you Adobe for the fix.

my apps still dont work =[
new ones i download work but the old ones dont!!
how do i fix this? i dont want to uninstall every single app
and i have tris.. how can i re-download that?! i cant if i take it off
anyone know how to make my old apps work?

HT3231 I tried to migrate information from MacBook Air to ...Pro and it seemed to have taken files from folders on desktop as none exist on Air now. As to where these files are, I don't know. It has also taken my pictures from iPhoto to unknown destinat

I tried to migrate information from MacBook Air to ...Pro and it seemed to have taken files from folders on desktop as none exist on Air now. As to where these files are, I don't know. It has also taken my pictures from iPhoto to unknown destination. ??

If you used migration assistant then it probably created a new Login user and placed the migrated files under it.
Regards,
Captfred

Update seems to have broken openbox theming.

I updated about 2 hours ago and it seems to have broken a lot of my window manager.
I use openbox as a standalone window manager and have had no issues so far.
I update every few days and today caused the resizing-freeze issue, so I downgraded the suggested packages which fixed that.
However I have another issue with theming.
Programs such as firefox, thunderbird, thunar etc... all have the correct theme. However I use some gnome programs such as rhythmbox and nautilus and neither of these are themeing correctly as well as terminator and all appear to have the default gnome theme.
I use obconf and lxappearence for themeing normally, however these seem to have no effect.
I've done a fair amount of searching and googling and am now very tired and am going to bed.
If anyone has any advice it would be much appreciated. If I am being stupid in my sleep deprived state please feel free to point it out XD.

Hi all. I'm also running Openbox and have done the following so far;
1. Installed gnome-themes-standard. Created a new folder ~/.config/gtk-3.0/; Created the file in the folder "settings.ini" with the following code;
[Settings]
gtk-application-prefer-dark-theme = true
gtk-theme-name = Adwaita
gtk-fallback-icon-theme = gnome
Thanks to the info on the thread here
2. Checked out the post here. Downloaded the tar of Adwaita from this.page and did the usual "makepkg -s" magic and rebooted.
What I'm now getting is nm-applet in tint2 with the dark theme of Adwaita which is great but doesn't really match my dark theme axiomd but it's better than before.
What I'm wondering is how to manage this in lxappearance, change font etc?? If I select the theme Adwaita it's a light theme? Having looked in the directory there is both gtk-2.0 (i think this is the light one?) and gtk-3.0.
I've also noticed that it is affecting rhythmbox; slow to load and the status icon setting in the plugins is missing, so you close the GUI and find the app quits rather than the previous behaviour where it would close but the notification icon would still run in tint2 enabling one click control access to the GUI again.
I appreciate this is obviously a new implementation and will take a bit of time to learn but any tips from those in the know would be great!? TIA.
Last edited by phrac (2011-05-01 11:10:09)

[Solved] Xorg update from testing: display corruption.

Hello!
Today I did a update in my system, pacman updated 3 packs:
[2008-09-08 09:05] upgraded libx11 (1.1.4-3 -> 1.1.5-1)
[2008-09-08 09:05] upgraded pixman (0.11.8-1 -> 0.11.10-1)
[2008-09-08 09:05] upgraded xorg-server (1.4.99.906-3 -> 1.5.0-1)
My display now looks like this:
You see the stripes?
I use arch in x64 system with a xpress 200m card (using the open source drivers).
Someone have in cache the old version?
Thanks!
EDIT: Solved, bug from upstream solved in pixman-0.11.10-2
Last edited by kazuo (2008-09-16 12:13:33)

I've got the same problem.
To correct it, downgrade Pixman.:D
Last edited by DZello (2008-09-08 19:47:16)

Software update seems to have hung before it even started

I'm fairly new to owning a Mac (newer than an SE) and I a having a problem with Software Update. I can't tell if the system is supposed to work this way (which would be a terrible user experience) or if my system is really screwed.
Software Update always tries to get me to install updates at bad times so I had several updates that were overdue. They were marked as downloaded but they required a restart, so I never did the installation. Today, I remembered to go to software update to update the system. There were 11 updates. I had them all selected and I hit the button to install all 11 items.
My computer has been mostly unresponsive since then. It's been 2 hours. No progress bar has appeared. No configuration message has appeared. The only thing that has happened is that the icon that appears above software update has changed to the swirly rainbow "I'm working" icon.
I tried opening firefox. Nothing happened. I tried opening the activity monitor. The icon now appears in the shortcut bar but the activity monitor never came up. I tried opening the system profiler-- again, the icon now appears in the shortcut bar but nothing ever came up. I can't even scroll up in system update to see which 11 updates I'm installing; I can only see the 8 that were visible when I hit the start button. I even went to "About this mac" and clicked "more info" and the only thing that happened is that the "about this mac" screen disappeared.
The two possibilities seem to be that my system is working as expected (which would, as I said, be a horrible user experience), or that the system is hung.
I am extremely reluctant to shut the computer down in the middle of an update because it could corrupt the system but it's been 2 hours and I haven't gotten a progress bar or a single progress message. I really don't want to do that if this is expected behavior. On the other hand, my computer has been completely unusable for 2 hours and that seems like a ridiculous amount of time to install software that was already downloaded.
The 8 software updates that I can see in the list are:
iDVD Update 7.0.3
Digital Camera Raw Compatib... 2.5
iLife Support
AirPort Client Update 2009-001 1.0
Front Row Update 2.1.7
Safari 3.2.1
Java for Max OS X 10.5 Update 3 1.0
Security Update 2009-001 1.0
What's worse is that all of my Mac OSX using friends are asleep so I can't find out from them if this is expected behavior.
Please advise. I don't know if I should try to hard reboot or let it keep trying.

Do you have your data backed up?
Press this key combination: Commandoptionesc
Since Software update has jammed on you, that might not do anything. What it should do is bring up the "Force Quit" window. If the window doesn't show up within...15 minutes, it probably isn't going to make an appearance.
If you press the power button once, do you get the option to shut down?
If none of that works, hold the power button down till the computer powers off. After that, try booting in Safe Mode (hold the Shift key while booting) and see if the computer boots okay. If so, try booting normally. If a normal boot goes without issues, you can try updating using Software Update again--but do only 1 update at a time and see if it works. If not, let us know and we'll do more troubleshooting.
If the computer won't boot into Safe Mode, try repairing the disk using Disk Utility from the Install DVDs you got with your Mac. Insert Install Disc 1 and reboot the computer while holding down the C key. When the language menu appears, hit enter. Move your cursor to the top portion of the screen--some menus should appear. Choose Utilities, then *Disk Utility*. Highlight your drive's icon in the left-hand column and click the *repair disk* button. If anything can't be repaired, post the complete error here.
Goodness, that's a lot to read. Best of luck to you!
~Lyssa

10.6.2 combined update seems to have no effect

Hello all,
I recently upgraded to Snow Leopard (10.6.0) from Leopard (10.5.8) and everything looked pretty good. However, I've tried to install the "10.6.2 combined update" through Software Update two times now and it doesn't seem to have worked either time. I get no error message, but after my computer restarts the "About This Mac" window still shows a system version of 10.6. Can anyone suggest what might be going wrong and how to fix it?
Thanks!

K T wrote:
Combo update is not available via Software Update.
yes, it is if you are upgrading directly from 10.6. that's exactly what the OP got via software update.

5.0.1 update seems to have destroyed personal content (calendar, contacts, phontos) also from iTunes backup

I updated 5.0.1 to my iPhone 4. Just before it I syncronized the phone with iTunes not to loose my content. However after uploading 5.0.1 I couldn't first connect the to iTunes and when I finally succeeded to get iTunes to recognize the iPhone the version to be syncronised seems to have lost all my personal content. How can I get my calendar, contacts, photos, apps etc. back?

Thanks, but this didn't help me. My phone is a 3GS--maybe that makes the difference. What ended up working was to hook back up to iTunes and right click on my phone's name, click restore backup, click restore at the next prompt, and then tell it no when it asks about activating the iCloud. Now all my data is restored and the phone is working perfectly.

Can i still sync my files even though i have corrupted files?

so i just put my itunes library on my new mac laptop from my pc. on my pc i have that stupid thing where it says it lost the pathway and i guess the files are now corrupted. BUT they still play on my ipod. I have synced my ipod several times not realizing this could cause a issue on my ipod, but the songs are still playing on my ipod but not my pc. so now the songs wont play on my mac either, but still play on my ipod. i want to download some more songs, but i am afraid to sync my mac and my ipod now for fear that it will replace the songs that work, with the corrupted files. also, i used my ipod as a external hard drive to transfer the files and haven't set it back up to do an automatic sync because once again i am afraid of losing the songs. the songs that are corrupt are ones from cds and ones i downloaded off itunes. but when i go to try to download the songs i already purchased, it doesn't get them all.
help?

if the error you are getting is a disk copy error when trying to sync the ipod, then that error normally halts the sync process. that would be why you "synced" your ipod but the songs still play on your ipod... if you have a back up of your computer, then you can find and delete the file that is giving the read or copy error and replace it with your back up.
very important! if you are actually getting read or copy errors, then your disk may be beginning to fail. make sure that you have a good back up. if not then make one as soon as possible. as the saying goes, there are 2 kinds of hard disks: those that have failed and those that are going to fail... so protect yourself and make a back up if you wish to avoid the pain of loosing files.
if some other problem is happening, like the some files have been mistakenly deleted (outside of itunes) and itunes just cant find the files anymore, than that is a matter of resorting the files from a back up. i believe itunes will also halt a sync if it can't find a file...
there is a shareware utility called "podworks" which allows you to copy a song from your ipod and restore it to your computer if you've lost the song from your hard disk... but it will only copy what is still on your ipod, meaning that if you do a sync and some files get deleted from your ipod in the process, then you'll have to restore them another way. you can find podworks on versiontracker.com

Latest ATV update seems to have worked...

I had been having a ton of problems with my downstairs ATV over the past month or so. It would continually drop out of itunes, and even restarting itunes wouldn't work. I tried a factory reset. Syncing would take up to 24 hours. Just really bad.
I did the check for updates and updated the software on the ATV with whatever changes were newest, and it seems to have worked. I've had itunes open for 24 hours and the Living Room ATV is still showing up on it. And I was able to stream some content somewhat efficiently. Still haven't tried to see how much improved the sync time is, but I'm hopeful.

OK, I tried running disk utility from the system disk as you suggested. It acted just the same way - froze about 1/3 of the way through. Gave the same error message, and the same scary message that if you stop running disk utility (which one must do since it will not run), then there is a risk of damaging the disk.
Thanks for the help. Any other suggestions?

[SOLVED] pacman - package does not have a valid architecture

Hello,
When I was trying to update my system recently, I ran into this problem:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date 0.0 B 0.00B/s 00:00 [----------------------] 0%
multilib is up to date
:: Starting full system upgrade...
error: failed to prepare transaction (package architecture is not valid)
:: package wine-1.7.17-1-i686 does not have a valid architecture
I tried clearing pacman's cache to see if that was the problem, but it didn't do anything. I haven't upgraded the system in over a week before this, and I've installed packages in the mean time without issues. I know that it's not just a wine issue - I tried installing some random packages but ran into the same issue.
The only thing I can think of that might have caused this would be archiso - I was trying to build a custom ISO but build.sh went wacky for some reason, and it seemed to be trying to install packages onto my system, not into the ISO.
EDIT: This problem seems to only affect packages in community and extra. Packages from core and multilib don't run into this problem.
SOLUTION: I think pacman's database files for community and extra got corrupted somehow. I just went into /var/lib/pacman, moved the sync folder to sync_old, then ran pacman -Sy, Everything seems to be good now.
Last edited by DoctorSelar (2014-04-18 23:04:45)

DoctorSelar wrote:... then ran pacman -Sy, Everything seems to be good now.
Unless that's a typo or you immediately followed it by `pacman -Su` then everything is not good now. Never run `pacman -Sy`.

[SOLVED] pacman update seems to have corrupted files!

Similar Messages

Maybe you are looking for