[SOLVED] Perl updated to 5.20: Should I pacman -Syu?

Hi all,
In the arch home page one reads:
Perl updated to 5.20
2014-06-04
Perl 5.20, as any other new perl version, requires all modules that are not purely perl code to be rebuilt. We did that for all packages in our repos.
The last couple major updates printed an error message when trying to load modules built against the wrong version, 5.20 seems to cause segfaults. Please make sure to rebuild all custom installed CPAN modules and binaries that link to libperl.so.
Refer to my post on arch-dev-public for a script that helps to find those packages.
I executed the script and I got this:
$cd /tmp/find-broken-perl-package.22jFUOeh
$ls *
pacman.txt perl-dists.txt perl-modules.txt raw.txt
$cat *
libproxy
Net::Libproxy
/usr/lib/perl5/vendor_perl/auto/Net/Libproxy/Libproxy.so
I read the announcement, but I'm not sure what to do next.. What should I rebuild and how?
Or am I good to just go on and pacman -Syu? I'm a bit extra cautious as I had problems in
the past when I wasn't.
Thanks in advance
EDIT: perl-dists.txt was empty, so the output of cat * is for pacman.txt, perl-modules.txt, and raw.txt, respectively.
Last edited by geo909 (2014-06-17 01:43:51)

tomk wrote:I guess it might be helpful to add that in the news item, the word "custom" essentially means "installed from source(s) other than the official Arch repos", since the devs have taken care of any official packages. So you just need to determine the source of that libproxy package, and then rebuild or not as required.
Thanks.. I think I'll be safe to upgrade. Just one more question: while trying to figure out who is using the libproxy package
I did the following:
jorge@flamingo:~$ sudo pacman -Qo /usr/lib/perl5/vendor_perl/auto/Net/Libproxy/Libproxy.so
/usr/lib/perl5/vendor_perl/auto/Net/Libproxy/Libproxy.so is owned by libproxy 0.4.11-2
Ok, so sure enough Libproxy.so is used by libproxy. Then I'm not sure how to find out
who is using libproxy as a dependency. I did
pacman -Si libproxy
but that didn't give any information about that. So I had to pretend that I'm
uninstalling things to get to what is using libproxy:
jorge@flamingo:~$ sudo pacman -R libproxy
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: glib-networking: requires libproxy
jorge@flamingo:~$ sudo pacman -R glib-networking
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: libsoup: requires glib-networking
jorge@flamingo:~$ sudo pacman -R libsoup
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: abiword-plugins: requires libsoup
:: darktable: requires libsoup
:: gst-plugins-good: requires libsoup
:: gstreamer0.10-good-plugins: requires libsoup-gnome
:: gvfs: requires libsoup
:: webkitgtk2: requires libsoup
Is there a more proper way of obtaining those packages?

Similar Messages

[SOLVED] Can't find LVM root device after pacman -Syu

Hey, can anyone give me a hand here? I haven't updated in about a month, but the last time I did was definitely after the changes-to-lvm post in the news (I know that because it's what got me on the last update )
I noted just before the update that cat /proc/1/comm displayed "init", which surprised me. Maybe I'd installed systemd but not configured it?
Anyway now I'm getting:
Waiting 10 seconds for device /dev/mapper/belle-root …
ERROR: Unable to find root device '/dev/mapper/belle-root'
You are being dropped to a recovery shell.
I've chrooted from a SUSE CD I had lying around and followed the "changes to LVM" instructions again in case I'd missed something, but nothing is changing.
Can anyone help me out? Thanks.
Last edited by DoctorWedgeworth (2013-03-27 00:32:41)

You have to use lvm first. As all those vg*, lv*, and pv* commands are actually links to the lvm command, you should have to do something like "lvm vgscan" instead of just "vgscan".
Edit: oh and at that point in the boot process, you are actually in the initramfs still (ash to be specific).
Edit2: I was having issues with a USB keyboard and a new machine (actually just a new bios), and found out that because of windows 8's requriement for a fast POST, the default is to turn off the scanning for usb devices. Though this was for UEFI, and I am not sure if the same would apply for a bios booting machine...
Last edited by WonderWoofy (2013-03-26 23:10:40)

Can reinstall uuid after perl update to 5.16

hello, guys
i using pacmanager instead of putty, pacmanger depent on perl's modules. after i update whole the system, opened pacmanger fail, so i have to reinstall pacmanger, but when i reinstalled uuid, it response the error like this:
http://aur.archlinux.org/packages.php?ID=30173
btw: complie uuid from source ,it success to build only one,but other error same as above.

[root@exorzist /]# pacman -S core/perl
warning: perl: local (5.10.0-2) is newer than core (5.8.8-9)
warning: perl-5.10.0-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: irssi: requires perl>=5.10.0-1
:: perl-dbi: requires perl>=5.10.0
:: perl-io-socket-ssl: requires perl>=5.10.0
:: perl-locale-gettext: requires perl>=5.10.0
:: perl-net-ssleay: requires perl>=5.10.0
:: perl-xml-simple: requires perl>=5.10.0
:: perlxml: requires perl>=5.10.0
:: sdl_perl: requires perl>=5.10.0
what should i do?

TS3694 just got a 3004 error while trying to update iphone version, what should I do

juat got 3004 while trying to update iphone version, what should I do?

error 3014 is this
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below inUnable to contact the iOS software update server gs.apple.com.
If you have jailbroken you will get no support here. It is against the terms of use of this forum to discuss jailbreaking

[Solved] Pacman -Syu not updating fully?

I've run Syy then Syu a couple times, yet pacman doesn't alert me to a newer Linux in core.
$ uname -r
Output: ... 3.6.5 ...
$ pacman -S linux
Output: ... linux-3.6.9-1 ...
So should I install this newer Linux regardless and then re-run Syu? Or is pacman disregarding 3.6.9 for a reason?
Thanks,
Last edited by theoddsarebad (2012-12-10 20:18:37)

theoddsarebad wrote:
I haven't done the update yet, I just see that it is available, and my system has already been rebooted a few times after a previous system update (last week).
So the scenario is I have a freshly rebooted box reporting kernal 3.6.5, and pacman -Syy then pacman -Syu tells me everything is up to date, and pacman -S linux tells me that 3.6.9 is available.
That scenario seems odd so I just wanted to ask if it means maybe that I shouldn't update yet, or should I just update the kernel regardless by doing pacman -S linux?
You have "linux" on IgnorePkg? check your /etc/pacman.conf
If you are using arch on a vps (not based on kvm, but on openvz or similar) chances are, you are stuck with your current kernel.
If thats the case, don't force the kernel update.
Last edited by chris_l (2012-12-10 19:44:59)

[SOLVED] perl 5.16-2 breaks LWP

... or actually, some dependencies of LWP.
I have some scripts that use LWP (perl-libwww) to process web pages (old school, I know, but I wrote them long ago).
After running pacman -Syu yesterday I noticed that my scripts were generating 'Segmentation fault' messages. After some digging, I ran perl interactively and entered several 'use' statements for each dependency. I found the perl module Encode::Locale is where the segfault seems to be happening, but CPAN shows that module last updated in February. Digging further, HTTP::Message has the same issue (it's another dependency of LWP.
I'm betting there are other perl modules involved as well, because another system that has a 2-day old Arch install showed the same symptoms, but LWP was not installed there. I had to fix that one by rolling perl back to 5.14.
Any clues, hints, fixes?
Thanks in advance.
Mike
Last edited by mmoser (2012-06-08 17:11:47)

Juster - Thanks in advance for your help
the trace for Encode::Locale; goes like this:
$ perl -d
Loading DB routines from perl5db.pl version 1.37
Editor support available.
Enter h or 'h h' for help, or 'man perldebug' for more help.
use Encode::Locale;
Signal SEGV at /usr/lib/perl5/site_perl/Encode.pm line 10.
require Encode.pm called at /usr/share/perl5/site_perl/Encode/Locale.pm line 13
Encode::Locale::BEGIN() called at /usr/lib/perl5/site_perl/Encode.pm line 0
eval {...} called at /usr/lib/perl5/site_perl/Encode.pm line 0
require Encode/Locale.pm called at - line 1
main::BEGIN() called at /usr/lib/perl5/site_perl/Encode.pm line 0
eval {...} called at /usr/lib/perl5/site_perl/Encode.pm line 0
Aborted
And the load list looks like
$ perl -E 'BEGIN { unshift @INC, sub { say $_[1] }} use Encode::Locale;'
Encode/Locale.pm
strict.pm
base.pm
vars.pm
warnings/register.pm
warnings.pm
Exporter.pm
Encode.pm
XSLoader.pm
Encode/Alias.pm
bytes.pm
Encode/Config.pm
Encode/ConfigLocal.pm
Encode/Encoding.pm
I18N/Langinfo.pm
Carp.pm
(Please understand that I'm not trying to place blame anywhere, I just want to fix whatever broke. And it's probably upgrade I missed somewhere)
Again, thanks in advance,
Mike
Last edited by mmoser (2012-06-08 01:05:14)

[SOLVED]kernel update to kernel26-2.6.38.2-1, boot fail

First of all my archlinux know-how only dated from April 2011. And I began my linux explore just at March 2011 after whole disk format of old XP.
Apology that English is not my native language.
My problem:
Intel P M dothan 725 1.6GHz laptop.
1. I had ubuntu10.10 installed on sda1 and grub2 installed to the MBR. sda2 as swap.
2. I installed archlinux onto sda3 inside ubuntu according to this WIKI:(Install from Existing Linux) https://wiki.archlinux.org/index.php/In … ting_Linux
3. os_probe detected the new os and updated the boot menu. I was able to login to archlinux. I was able to use the wireless network and installed gnome.
Then one day "pacman -Syu" prompted me to update to kernel26-2.6.38.2-1. I did the upgrading but got a boot failure.
After the grub2 screen the system began to initialize, I could see lines of messages scrolling down the screen.
But it seems the scroll down will never stop. The scroll down speed is too fast I am not able to recognize the messages.
Anyhow I perceived that the scrolling messages were repeating the same content. I guess it got into an "infinite loop".
This happened as soon as I selected archlinux in grub2(less than 0.5s after I hit ENTER), and before udev b/c the screen resolution was not reset to its optimal.
I don't think there's any dmsg log.(Well, I admitted I did not checked.)
All I can do is to login to ubuntu and chroot to archlinux and retreat to the previous kernel. And fortunately it worked.
I tried to update the kernel several times both in ubuntu chroot and in archlinux. All failed. All the same symptom.
I am not sure if it was a bug in kernel26-2.6.38.2-1.
Can I fix the problem, or should I file a bug report?
Another problem, I do not know how to file a bug report.
edit:
kernel26-2.6.37.5-1
kernel26-2.6.37.6-1 all confirmed no problem.
I have retreated to kernel26-2.6.37.6-1
Last edited by comicosmos (2011-05-04 12:02:00)

I would prefer to paste the lspci -vnn info here if you don't mind.
There were kinds of log files under /var/log but I almose know nothing about them.
I didn't try 2.6.38 on Ubuntu because I'd prefer the stable version. It had not been released. Anyhow your questions make me curious to see the result. Maybe I will give it a try.
You can see it's fairly old hardware ;-)
00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 21)
Flags: bus master, fast devsel, latency 0
Memory at b0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] Vendor Specific Information: Len=04 <?>
Capabilities: [a0] AGP version 2.0
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 21) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: a0000000-afffffff
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 [UHCI])
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1200 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 [UHCI])
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1220 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 0, IRQ 10
Memory at f4000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=0080
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=0a, sec-latency=32
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: d0000000-dfffffff
Prefetchable memory behind bridge: 90000000-9fffffff
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
Flags: bus master, medium devsel, latency 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 1100 [size=16]
Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
Kernel modules: piix, ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
Subsystem: Benq Corporation Device [17ff:0586]
Flags: medium devsel, IRQ 6
I/O ports at 1400 [size=32]
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 0, IRQ 6
I/O ports at e000 [size=256]
I/O ports at e100 [size=64]
Memory at f0000000 (32-bit, non-prefetchable) [size=512]
Memory at f0000200 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic])
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 0, IRQ 6
I/O ports at e200 [size=256]
I/O ports at e300 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA controller])
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at a8000000 (32-bit, prefetchable) [size=128M]
I/O ports at c100 [size=256]
Memory at e0010000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at a0000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb
02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Device [8086:2701]
Flags: bus master, medium devsel, latency 128, IRQ 6
Memory at d0009000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: ipw2200
Kernel modules: ipw2200
02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller [8086:103d] (rev 83)
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 128, IRQ 10
Memory at d0008000 (32-bit, non-prefetchable) [size=4K]
I/O ports at a0c0 [size=64]
Capabilities: [dc] Power Management version 2
Kernel driver in use: e100
Kernel modules: e100
02:09.0 CardBus bridge [0607]: ENE Technology Inc CB-720/2/4 Cardbus Controller [1524:1421] (rev 01)
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 90000000-93fff000 (prefetchable)
Memory window 1: d4000000-d7fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:09.1 CardBus bridge [0607]: ENE Technology Inc CB-720/2/4 Cardbus Controller [1524:1421] (rev 01)
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 94000000-97fff000 (prefetchable)
Memory window 1: d8000000-dbfff000
I/O window 0: 0000ac00-0000acff
I/O window 1: 0000b000-0000b0ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:09.2 FLASH memory [0501]: ENE Technology Inc CB710 Memory Card Reader Controller [1524:0510]
Subsystem: Benq Corporation Device [17ff:0586]
Flags: medium devsel, IRQ 10
I/O ports at a000 [size=128]
Capabilities: [a0] Power Management version 2
Kernel driver in use: cb710
Kernel modules: cb710
02:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
Subsystem: Benq Corporation Device [17ff:0586]
Flags: bus master, medium devsel, latency 128, IRQ 11
Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Memory at d0004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
Last edited by comicosmos (2011-04-19 14:52:05)

Whenever i opened Add-ons it is not shownig FIND UPDATES for THEMES,What Should i do?

Whenever i opened Add-ons it is not showing FIND UPDATES for THEMES,What Should i do?
== This happened ==
Every time Firefox opened

Do you have themes installed or only personas?
See [[Using themes with Firefox]] and http://kb.mozillazine.org/Themes (Lightweight theme)

[Solved] glibc-Update-fail and broken system when using custom kernel

I had a similar issue with the glibc-update as described in several threads.
I guess, the reason why I ran into the problem was that I'm using a custom-built kernel. So the kernel modules (drivers etc.) under /lib/modules/custom-kernel/ are owned by no pacman package.
At my system, after upgrating via
# pacman -Syu --ignore glibc
# pacman -Su
The upgrade failed and /lib/modules/ and the files, owned by the glibc-package remained at the still existing directory /lib.
Rebooting the computer in this situation causes a sytem freeze.
Now, here is my sucessful repair, briefly described. Maybe it will help someone:
1. Booting the computer with the Arch Linux net Install image
2. mounting my root partition manually at /mnt
3. performing the following commands:
# cd /mnt
# cp -ar lib/* usr/lib/
# rm -rf lib
# ln -s usr/lib lib
7. removing net install image and rebooting the computer
==> the system works again, but:
# pacman -Su
still produces error messages like:
error: failed to commit transaction (conflicting files)
glibc: /lib exists in filesystem
glibc: /usr/lib/ld-2.16.so exists in filesystem
glibc: /usr/lib/ld-linux.so.2 exists in filesystem
glibc: /usr/lib/libBrokenLocale-2.16.so exists in filesystem
glibc: /usr/lib/libBrokenLocale.so.1 exists in filesystem
Now at the last step I did is, what the wiki is seriosly discouraging from I use --force:
# pacman -f -Su
After that my system was repaired
I think using force at that point is OK, because the files will only be replaced which are already moved to the right location.

If you use a custom-built kernel you should really package it up so you can easily avoid this sort of thing just by repackaging.

After a firmware update to airport express should I unplug the unit then plug it back in? (bascially reboot it)

After a firmware update to airport express should I unplug the unit wait a bit and plug it back in? (basically a reboot)

I updated the firmware on the 2nd of this month. Everything was fine. About a week later internet speed began to be slow. I rebooted the modem and the speed was okay for awhile, then slow again. I'm wondering if it's the airport express. It didn't tell me to reboot at the end of the installation.

[Solved] Recent update seems to have broke automount in XFCE

I seem to have managed to break my removable storage support. It had been working since installation several months ago. I have made no modifications to anything in /etc other than those that would be performed by package updates.
Tried copying /etc/skel/.xinitrc to ~/ and added exec dbus-launch ck-launch-session startxfce4.
Checked output of groups to ensure I'm in the storage group.
Checked for presence of org.freedesktop.udisks.pkla:
[Local Users]
#Identity=unix-user: your_username
Identity=unix-group:storage
Action=org.freedesktop.udisks.*
ResultAny=yes
ResultInactive=no
ResultActive=yes
System updates from the last week from /var/log/pacman.log:
[2011-10-11 19:47] Running 'pacman -Syu'
[2011-10-11 19:47] synchronizing package lists
[2011-10-11 19:47] starting full system upgrade
[2011-10-11 19:48] upgraded empathy (3.2.0-1 -> 3.2.0.1-1)
[2011-10-11 19:48] upgraded gtksourceview3 (3.2.0-1 -> 3.2.1-1)
[2011-10-11 19:48] upgraded imagemagick (6.7.2.8-1 -> 6.7.3.0-1)
[2011-10-11 19:48] upgraded libass (0.9.13-1 -> 0.10.0-1)
[2011-10-11 19:48] upgraded mpfr (3.1.0-2 -> 3.1.0.p1-1)
[2011-10-11 19:48] upgraded shared-mime-info (0.90-1 -> 0.91-1)
[2011-10-11 19:48] upgraded transmission-gtk (2.41-1 -> 2.41-2)
[2011-10-11 20:02] Running 'pacman -S --asdeps xmlto docbook-xsl'
[2011-10-11 20:02] installed perl-yaml-syck (1.17-2)
[2011-10-11 20:02] installed perl-test-pod (1.44-1)
[2011-10-11 20:02] installed xmlto (0.0.24-1)
[2011-10-11 20:02] installed docbook-xsl (1.76.1-1)
[2011-10-12 21:41] Running 'pacman -S gnome-bluetooth'
[2011-10-12 21:41] Running 'pacman -Syu'
[2011-10-12 21:41] synchronizing package lists
[2011-10-12 21:41] starting full system upgrade
[2011-10-12 21:48] upgraded amule (10624-1 -> 10645-1)
[2011-10-12 21:48] upgraded farsight2 (0.0.29-1 -> 0.0.31-1)
[2011-10-12 21:48] upgraded libsasl (2.1.23-7 -> 2.1.23-8)
[2011-10-12 21:48] upgraded systemd (36-1 -> 37-1)
[2011-10-12 21:48] upgraded systemd-arch-units (20110902-1 -> 20111011-1)
[2011-10-12 21:48] upgraded telepathy-glib (0.15.7-1 -> 0.15.9-1)
[2011-10-12 21:48] upgraded xf86-input-evdev (2.6.0-3 -> 2.6.0-4)
[2011-10-12 21:48] upgraded xf86-input-synaptics (1.4.1-1 -> 1.5.0-1)
[2011-10-12 21:48] upgraded xf86-video-intel (2.15.0-2 -> 2.16.0-1)
[2011-10-12 21:48] upgraded xkeyboard-config (2.2.1-1 -> 2.4.1-1)
[2011-10-12 21:48] upgraded xorg-server-common (1.10.4-1 -> 1.11.1-2)
[2011-10-12 21:48] upgraded xorg-server (1.10.4-1 -> 1.11.1-2)
[2011-10-12 21:48] upgraded xorg-xinit (1.3.0-3 -> 1.3.1-1)
[2011-10-14 16:04] Running 'pacman -Syu'
[2011-10-14 16:04] synchronizing package lists
[2011-10-14 16:04] starting full system upgrade
[2011-10-14 16:04] upgraded coreutils (8.13-2 -> 8.14-1)
[2011-10-14 16:04] warning: directory permissions differ on var/lock/
filesystem: 755 package: 1777
[2011-10-14 16:04] upgraded filesystem (2011.08-1 -> 2011.10-1)
[2011-10-14 16:04] upgraded mkinitcpio (0.7.3-1 -> 0.7.4-1)
[2011-10-15 10:35] Running 'pacman -Syu'
[2011-10-15 10:35] synchronizing package lists
[2011-10-15 10:35] starting full system upgrade
[2011-10-15 10:35] upgraded nettle (2.2-1 -> 2.4-1)
[2011-10-15 10:35] upgraded gnutls (3.0.3-1 -> 3.0.4-1)
[2011-10-15 10:35] upgraded inetutils (1.8-5 -> 1.8-6)
[2011-10-15 10:35] upgraded laptop-mode-tools (1.59-1 -> 1.60-1)
[2011-10-17 08:08] Running 'pacman -Syu'
[2011-10-17 08:08] synchronizing package lists
[2011-10-17 08:08] starting full system upgrade
[2011-10-17 08:08] upgraded gnutls (3.0.4-1 -> 3.0.4-2)
[2011-10-17 08:08] upgraded hyphen (2.7.1-2 -> 2.8.3-1)
[2011-10-17 08:08] upgraded imagemagick (6.7.3.0-1 -> 6.7.3.1-1)
[2011-10-17 08:08] upgraded iso-codes (3.14-1 -> 3.29-1)
[2011-10-17 08:08] upgraded libpulse (1.0-3 -> 1.0-4)
[2011-10-17 08:08] upgraded man-pages (3.32-1 -> 3.35-1)
[2011-10-17 08:09] upgraded pulseaudio (1.0-3 -> 1.0-4)
[2011-10-17 08:09] upgraded syslog-ng (3.2.4-3 -> 3.3.1-1)
[2011-10-17 08:09] upgraded telepathy-glib (0.15.9-1 -> 0.16.0-1)
[2011-10-17 09:09] Running 'pacman -S consolekit'
[2011-10-17 09:09] upgraded consolekit (0.4.5-1 -> 0.4.5-1)
[2011-10-17 09:09] Running 'pacman -S gvfs-afc'
[2011-10-17 09:09] installed gvfs-afc (1.10.0-2)
[2011-10-17 09:09] Running 'pacman -Rsn gvfs-afc'
[2011-10-17 09:09] removed gvfs-afc (1.10.0-2)
Edit:
Installed gvfs-afc and edited order on xinitrc to ck-launch-session dbus-launch startxfce4. Seems to work.
Never had to worry about any of these before though
Last edited by android_808 (2011-10-17 08:57:25)

Hi,
I automount four NFS mounts from my ubuntu server through /etc/fstab. This used to work perfectly. Until the latest filesystem update. The removable devices do not get mounted. They do not appear in Nautilus. But when I plug in a USB, they all get activated.
Anyway, I will try your solution.
Regards,
Alexander

[SOLVED] webkitgtk2 update issue

After latest update i have the following issue:
sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Packages (1): webkitgtk2-1.10.2-6
Total Installed Size: 39.17 MiB
Net Upgrade Size: 1.01 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [########################################################] 100%
(1/1) checking package integrity [########################################################] 100%
(1/1) loading package files [########################################################] 100%
(1/1) checking for file conflicts [########################################################] 100%
error: failed to commit transaction (conflicting files)
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitFaviconDatabase.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitFileChooserRequest.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitGeolocationPolicyDecision.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitHitTestResult.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitIconDatabase.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitNetworkRequest.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitNetworkResponse.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitSecurityOrigin.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitSoupAuthDialog.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitSpellChecker.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitViewportAttributes.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebBackForwardList.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebDataSource.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebDatabase.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebFrame.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebHistoryItem.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebInspector.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebNavigationAction.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebPlugin.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebPluginDatabase.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebPolicyDecision.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebResource.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebSettings.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/WebKitWebWindowFeatures.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/annotation-glossary.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/ch01.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/ch02.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/ch03.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/home.png exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.0.1.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.0.2.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.0.3.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.1.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.10.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.11.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.13.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.14.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.15.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.16.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.17.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.18.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.2.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.20.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.23.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.3.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.4.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.5.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.6.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.7.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.1.8.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.3.1.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.3.2.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.3.3.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.3.4.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-1.3.8.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-all.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index-deprecated.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/index.sgml exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/left.png exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/right.png exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/style.css exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/up.png exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/webkit-environment.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/webkitgtk-Global-functions.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/webkitgtk-webkitdownload.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/webkitgtk-webkitwebview.html exists in filesystem
webkitgtk2: /usr/share/gtk-doc/html/webkitgtk/webkitgtk.devhelp2 exists in filesystem
Errors occurred, no packages were upgraded.
I searched for the solution, and one of the solution would be to use
sudo pacman -S --force webkitgtk2
but not sure if its safe to force the pacman to update it. What should i do?
Thank you in advance!
Last edited by gevera (2013-06-15 16:29:55)

drcouzelis wrote:
Is it safe to force update?
No! If you don't know when to use "--force", then don't use "--force"!
DISCLAIMER: I, too, don't know when it's safe to use "--force". You were wise to simply wait and ask.
"May The Force Be With You" - Yoda
I'll get home and update one more time to see the problem persists.

Hi guys, I want to sync my Pages program to iCloud but haven't got an option to do so in the pages program. Instead there is only iWork. I think I have the updated version its, 4.1 (923) do i have to update my version or should it work?

Hi guys, I want to sync my Pages program to iCloud but haven't got an option to do so in the pages program. Instead there is only iWork. I think I have the updated version its, 4.1 (923) do i have to update my version or should it work?

I think you mean "there is only iWork.com". iWork is the name of the 3 software programs. iWork.com is a web site.
You can use iWork.com till 1 August. (Apple is shutting down iWork.com from 1 August.) After that date you'll have to use iCloud, though it's available now to use. See Re: How to upload a document to iCloud from Mac?
NB This process is a bit clumsy. Apple have said they'll be improving iCloud in OS X Mountain Lion. But this new version of OS X won't be available till end of summer (or winter if you're in the other hemisphere).
Note also that iCloud only syncs documents between your devices. It doesn't share documents with others. If you need to do this you should consider another service like DropBox, Google Drive or Microsoft Skydrive.

Iphone hung while updating the ios what should i do ?

iphone hung while updating the ios what should i do ?

Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

HT4623 My ipad 2 doesn't have the software update option. What should I do?

My ipad 2 doesn't have the software update option. What should I do to upgrade my ipad to ios 5. I can not use or download most of the apps.

Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
(81253)

[SOLVED] Perl updated to 5.20: Should I pacman -Syu?

Similar Messages

Maybe you are looking for