[SOLVED] Slow desktop animation Gnome 3
This only happens with my nvidia gtx 460 with nvidia drivers. My laptop with open source intel works fine. The problem is that when I go to the activities with my notification area (bottom right) populated then the frames per second is horribly slow. When the notification area is empty then it works fine. Since the activities is pivotal to using gnome 3 it is the only thing stopping me from liking it and drives me crazy. I suspect it might be a problem with the way gnome works. Anyone have suggestions?
Last edited by NewbyProgrammer (2011-04-10 05:46:53)
wonder wrote:
what about this ?
https://bbs.archlinux.org/viewtopic.php?id=116558
Ahh that was a much better solution
Similar Messages
-
[SOLVED] Slow Desktop GUI components
Arch Linux 64
i5 -2500k / 8GB Ram / Nvidia with the closed source drivers
OpenBox
LXPanel
compton-git (from AUR)
I am running into a strange recurring problem for some time now.
Even though running and launching applications is fast, various GUI components of individual apps are lagging.
For example moving through the preferences tabs of Pidgin, or preferences tabs of firefox, or changing between open tabs in Firefox( does not happen in Chrome) or generally using the GUI dialogs of certain applications might take 2-3 seconds from the time I clicked to the gui component to the time the change occurs (for example changing from one preference tab to another).
I do not have any performance issues generally in the system, except those gui components that are painfully slow.
Things i have tried so far:
-Initially i thought it was only manifesting in firefox so I reseted the profile but that did not improve the situation.
-I thought it might have to do with GTK so I deleted the .gtk-bookmarks from home dir (in order to be recreated) but that did not improve the situation. I still believe it might have something to do with GTK.
any suggestions are greatly appreciated.
Last edited by mastorak (2014-05-19 19:56:16)After more experimentation I am now fairly certain that the issue is caused by compton.
I looked into the bugs reported for compton and apparently there are some issues caused by it when used with the nvidia driver having set the backend option to "glx".
With the following compton config it seems to be working correctly with no slowness.
backend = "xr_glx_hybrid"
vsync = "opengl-swc"
glx-no-rebind-pixmap = true
glx-no-stencil = true
paint-on-overlay = true
unredir-if-possible = true
Note that the backend "xr_glx_hybrid" config option is only available(for now) from the "compton-git" package and not "compton" package.
I do not mark it yet as "Solved" as I want to use it for sometime to be certain.
edit:for syntax errors
Last edited by mastorak (2014-05-19 08:38:28) -
Slow desktop/application sharing
Hi All
I have a lync server Enterprise environment & everything works fine. I am facing only one issue i.e slow desktop
sharing. when i share my desktop the sharing it's slow, internally within network it works fine. I wan't to ask if there is any way to change the quality of the desktop share.
Thanks in advance..
Cheers!Hi,
There's a way to enable higher-bandwidth sharing in Lync Server 2013. You can try enabling HighPerformanceP2PAppSharing and HighPerformanceConferenceAppSharing as part of a client policy. Here are details on how to do that: http://d1it.wordpress.com/2013/12/20/highperformanceappsharing/.
Gonzalo -
[Solved] How to add launchers to Desktop of gnome 3 ?
Hi,
I have gnome 3 installed. I have enabled adding files in desktop. Now my desktop shows home icon and trash. Now i want to add some existing application launcher to desktop. For example i have chromium browser installed and i have added it to favorites. I want to add launcher to desktop as a icon, so that i can click on chrome icon in desktop and use chromium browser. I searched on the google a lot but no luck
Last edited by ashwin_cse (2013-07-15 14:55:51)It is now solved. I installed extensions from here . These extensions make available gnome 2 features in gnome 3 by using native gnome 3 code and not by making to fall back to gnome 2. But these extensions doesn't have one feature i am looking for , which is launchers. For that only i found was to install gnome-panel. Which is a gnome2 thing. Unfortunately i couldn't find any gnome 3 things that would do this. So i installed gnome-panel which contains gnome-desktop-item-edit file. Then i ran the following to create a launcher :
gnome-desktop-item-edit --create-new ~/Desktop
But the problem is that the site says it might break with gnome 3 updates. -
Spaces/ multi-desktop animation slower in ML?
I've upgraded from Lion to Mountain Lion and have noticed that the animation effect when switching between spaces / desktops seems slower than before, in that it takes longer to complete. It seems to be just at the end of the animation, when the new space has nearly reached the side, it slows down more than before. Since the mouse is inactive until the animation completes, this means I have to wait just that little bit longer to carry on working. A minor irritation, but why the change?
Or, is it just my mind playing tricks on me? I don't have a Lion computer to compare it with.This is slowing me down tremendously. I've resorted to installing TotalSpaces but this is far from ideal, especially at work–where I have a Cinema Display attached to my 17" MacBook Pro.
But I move around a lot faster now.
Using the above workarounds–fast swiping, cmd+tab, ctrl+number keys–is not an option for me. Fast swiping is hit or miss, number keys don't go to full screen apps, and worst of all: every time I add/remove a desktop I would have to go back to keyboard shortcuts preferences. I'm a heavy ctrl+arrow keys user.
The way I see it, the only thing wrong is the speed/easing of the animation when swiping and using ctrl+arrow keys. A fix would be great, fingers crossed for 10.8.1 -
[SOLVED] Xorg & Firefox lock Gnome desktop, causing massive CPU usage
Hi there,
since I have installed ArchLinux x64 on this laptop (Core 2 Duo, 9600M GT with Nvidia's binary driver 195.36.15-2, Gnome 2.30) Xorg spins out of control every so often - more often repeatedly in an hour, sometimes not for a prolonged time.
This appears to occur (so far only) when Firefox is running (with any site, independent of Flash, but looks as if its main window has to be open) with which it then consumes an entire CPU core, making the mouse pointer and any terminal cursor blink rapidly, as well as windows being selectable, but not e. g. resizable or closable. Any keyboard input to a terminal has to be hammered in repeatedly to be accepted.
It also seems as if it is especially prone to happen if another program (say, gThumb) is ordered to switch to full-screen by F11 with FF's window open in the background, which frequently for whatever reason then also wants to change into full-screen, causing "conflict".
Switching to a console and killing Firefox or starting it via terminal and canceling it there ends each occurrence of the issue. Xorg.0.log does not report any errors.
An upgrade to Xorg 1.8 does not appear to have affected it.
I know this bug (or ones like it) has also occurred to others for years now, but I have so far been unable to find any solutions in reports concerning it.
Any help, please?
My xorg.conf (many options in "Device" have been inserted as attempts to solve the issue):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Dec 9 16:34:26 PST 2009
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "ignoreABI" "True"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "extmod"
Load "dbe"
Load "record"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
Driver "synaptics"
Option "TapButton1" "1"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "True"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G96 [GeForce 9600M GT]"
Option "AllowIndirectPixmaps" "True"
Option "AllowSHMPixmaps" "0"
Option "AddARGBGLXVisuals" "True"
Option "BackingStore" "True"
Option "DPI" "96 x 96"
Option "DynamicTwinView" "1"
Option "NoLogo" "True"
Option "OnDemandVBlankInterrupts" "True"
Option "PixmapCacheSize" "2000000"
Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3333; PowerMizerDefault=0x3; PowerMizerDefaultAC=0x1"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
edit: I cannot say exactly what apparently ended this issue, however (of the changes I explicitly remember) after the following it does no longer occur:
1. Had to delete the extensions.* (cache, ini, rdf) files as they became corrupted.
2. Removed the Fox Splitter (aka Split Browser) extension.
Last edited by misc (2010-06-23 12:14:09)Daemonjax wrote:Try another browser and see what happens... I like chromium.
Well yes, I though about this too, but that certainly wouldn't solve the problem (esp. were it to appear with other apps); besides, there are just way too many features (extensions, scripts etc.) that Chrome a) does not have or b) would be a royal pain to properly add.
Last edited by misc (2010-04-16 10:01:31) -
[Solved] Application launchers on desktop in Gnome 3.2?
So, I'm testing out gnome 3.2 again and I'm trying to create launchers on my desktop, but there doesn't appear to be an option for it in Gnome 3.2 when I right click my desktop. I have Nautilus drawing the desktop so did Gnome completely do away with this feature, and if so is there a way to manually create launchers (i'm assuming there is) using Gedit?
Last edited by Mr_ED-horsey (2011-10-17 20:02:07)Fixed. Found the answer on the Fedora forums:
[Desktop Entry]
Name=*******
Type=Application
Exec=launchcommand
Icon=pathtoicon
Categories=***********
Save as .desktop file and done. Linux is cool
Last edited by Mr_ED-horsey (2011-10-17 20:13:31) -
[SOLVED] Contents of home folder on desktop in Gnome Shell
A few days ago, after installing some updates (I believe gnome-themes-standard was amongst them) and restarting, I found that the contents of my home folder were displayed as icons on my desktop, and when I go into Activities mode, the background is black. Searching around hasn't turned up any results... any ideas?
In case there's any potential graphics related issues wrt the blank background, the system is a laptop with a HD3000 GPU in a Core i7 CPU.
Last edited by ch_123 (2013-03-04 10:00:07)You can probably remove the desktop icons by opening dconf-editor and going to org.gnome.desktop.background. Once there, untick show-desktop-icons and restart the Shell.
I don't know about your other issue though, have you tried with another theme?
EDIT: The issues are related; my background also just went black. Just untick the above option, re-set your wallpaper and finally restart the Shell; that did it for me.
Last edited by Unia (2013-02-23 15:35:30) -
Native logic windows (like 'Go To') have a SLOW 'spring' animation
I'm new to Mountain Lion, and the first thing I've noticed while trying to get any work done, is hitting "Go To" to open the "GO To Position" window results in the window opening with this really silly spring/zoom effect. I've tried everything I can think of, and I can't get rid of it.
I move FAST in Logic, and I'm used to not pausing after hitting my 'go to' key. I'll hit "goto" and then immediate the Time Code or Bar number.
However, now, my input doesn't take because I'm doing it while that spring/zoom thing is happening.
I've tried disabling the 'spring folders' preference in Finder, and removed "Animate opening info panels and desktop icons" via TinkerTool.
Can anyone help me solve this problem? It's a major groovebuster.Yet another reason not to move to the ugly ML beast.
Sorry to be of no help, the "Go To" key command windows open lightning fast (as you know) in Snow Leopard.
I wonder if it's yet another symptom of the graphics slow down problem that has plagued other users.The one where Logic freezes if a plugin with an animated graphic interface is opened. (Logic's channel eq in hi-res analyze mode) -
Slow desktop effects: Nvidia, Firefox and Thunderbird
This has been bugging me for years and after lots of search I couldn't find a solution. When compositing is enabled either using Compiz or Gnome Shell or even XFWM, desktop effects become slow and choppy when Firefox or Thunderbird are the active windows. This is true also when there's another window is active on top of a visible FF or TB. However the problem happens only when either FF or TB is maximised --no problem when they are not maximised. By “desktop effects” I mean Compiz effects like switching to another workspace using the "desktop wall" or the "Scale addon" or going to "overview" mode in Gnome Shell.
Right now I'm using the proprietary driver version 295.49 running on a 64bit 3.3.6 kernel on a Thinkpad T61. The problem persists across XFCE+Compiz (my current DE), Gnome Shell and KDE sessions.
I'd really appreciate any hint/tip on how to solve this. TIA,
Bahman
PS: My card is a "Quadro NVS 140m" and I've set the PowerMizer to always run at "Prefer Maximum Performance" mode.
Last edited by bahman (2012-05-17 06:38:08)Have the same problem. I am amazed at how little help there is for a problem that is so prodigeous as this topic is.
-
[SOLVED] After force restart GNOME doesnt' start
Hello!
I have a problem I can't resolve.
I restarted my pc where was opened GNOME session and next time GNOME haven't started. Just showing some startup applications ( Skype and notify window "the configuration defaults for the GNOME Power Manager have not been installed correctly. Please contact your computer administrator").
Here are some logs that could be helpful:
everything.log
Jan 24 01:42:02 pz init: Entering runlevel: 3
Jan 24 01:42:06 pz dhclient: isc-dhclient-4.1.0p1
Jan 24 01:42:06 pz dhclient: isc-dhclient-4.1.0p1
Jan 24 01:42:12 pz kernel: eth0: link down
Jan 24 01:42:13 pz kernel: agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
Jan 24 01:42:13 pz kernel: agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
Jan 24 01:42:13 pz kernel: nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
Jan 24 01:42:16 pz dhcpcd: dhcpcd not running
Jan 24 01:42:18 pz gnome-session[4580]: WARNING: Error retrieving configuration key '/desktop/gnome/session/idle_delay': Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:18 pz gnome-session[4580]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
Jan 24 01:42:18 pz gnome-session[4580]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
Jan 24 01:42:19 pz dhcpcd: dhcpcd not running
Jan 24 01:42:19 pz kernel: eth0: link down
Jan 24 01:42:19 pz dhcpcd: dhcpcd not running
Jan 24 01:42:24 pz gnome-session[4580]: WARNING: No required applications specified
Jan 24 01:42:27 pz kernel: wlan0: direct probe to AP 00:03:2f:2b:9f:4d (try 1)
Jan 24 01:42:27 pz kernel: wlan0: direct probe to AP 00:03:2f:2b:9f:4d (try 2)
Jan 24 01:42:27 pz kernel: wlan0: direct probe to AP 00:03:2f:2b:9f:4d (try 3)
Jan 24 01:42:27 pz kernel: wlan0: direct probe responded
Jan 24 01:42:27 pz kernel: wlan0: authenticate with AP 00:03:2f:2b:9f:4d (try 1)
Jan 24 01:42:27 pz kernel: wlan0: authenticated
Jan 24 01:42:27 pz kernel: wlan0: associate with AP 00:03:2f:2b:9f:4d (try 1)
Jan 24 01:42:27 pz kernel: wlan0: RX AssocResp from 00:03:2f:2b:9f:4d (capab=0x431 status=0 aid=1)
Jan 24 01:42:27 pz kernel: wlan0: associated
Jan 24 01:42:28 pz dhcpcd: version 5.1.4 starting
Jan 24 01:42:28 pz kernel: fuse init (API version 7.13)
Jan 24 01:42:28 pz dhcpcd: wlan0: rebinding lease of 192.168.1.100
Jan 24 01:42:29 pz Failed: to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:30 pz Failed: to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:31 pz Failed: to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:31 pz Failed: to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:32 pz dhcpcd: wlan0: acknowledged 192.168.1.100 from 192.168.1.1
Jan 24 01:42:32 pz dhcpcd: wlan0: checking for 192.168.1.100
Jan 24 01:42:37 pz dhcpcd: wlan0: leased 192.168.1.100 for 604800 seconds
Jan 24 01:42:37 pz gnome-session[4580]: WARNING: Application 'gnome-settings-daemon.desktop' failed to register before timeout
Jan 24 01:42:37 pz dhcpcd: forking to background
Jan 24 01:43:07 pz kernel: agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
Jan 24 01:43:07 pz kernel: agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
Jan 24 01:43:07 pz kernel: nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
Jan 24 01:43:08 pz gnome-session[4953]: WARNING: Unable to determine session: Unable to lookup session information for process '4953'
In Xorg.0.log everything seems ok and there are no errors.
There is a fact, that GNOME starts successfully from another user (root). So the problem could be in user settings or some unclosed sessions. Do not know what to do from logs
Thanks in advance!
Last edited by zayac (2010-01-24 01:17:55)zayac wrote:
Ok. I solved this for my issues.
The solution was found on the ubuntu forum:
http://ubuntuforums.org/showthread.php?t=1082257
What I've done is:
mv /myuser/.gconfd/saved_state /myuser/.gconfd/saved_state_backup
Then I had a completely recovered GNOME session on a next boot.
Moreover, it seems for me that saved_state could be completely removed in this case.
I'm going to go try that and see if it works -
[Solved] Slow graphics with RS780M and open source ati driver
EDIT: Well this is embarrasing. Guess this is why there's a new comers forum. I assumed since I installed a couple days ago my system was up to date. However, running pacman -Syu updated my kernal and it works fine now. SOLVED (I'm an idiot)
Hello Arch community. I've been using Ubuntu for a couple years so know that my hardware can work well enough with linux. Almost everything works great with arch with little setup, but I'm stumped as to how to setup the graphics card.
I'm attempting to use the open source drivers, either xf86-video-ati or xf86-video-radeonhd (I don't care which I use in the end). I have both installed so I can try out both, assuming that doesn't cause problems. I've never tried using the catalyst driver in arch, so I know I don't have remenents of that causing problems. Right I have gnome working, but when dragging a window, resizing a window, scrolling, or watching a video I can see the screen slowly refresh. It is definetly not right.
Here's the information that might help:
[jake@myhost ~]$ lspci | grep Radeon
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
I've tried various configurations. Right now I'm running without an xorg.conf. This is /var/log/Xorg.0.log from the setup without an xorg.conf
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux myhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 28 May 2009 10:40:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 23 11:58:06 2009
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:5:0) ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0x80000000/268435456, 0x92300000/65536, 0x92200000/1048576, I/O @ 0x00005000/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 0000000092300000
(II) RADEON(0): MMIO registers at 0x0000000092300000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9612)
(WW) RADEON(0): R600 support is mostly incomplete and very experimental
(--) RADEON(0): Linear framebuffer at 0x0000000080000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x30f2
IOBaseAddress: 0x5000
Filename: BR28896C.bin
BIOS Bootup Message:
HP_QT8 RS780M DDR2 200e/500m
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 69300
HBlank: 135, HOverPlus: 48, HSyncWidth: 32
VBlank: 16, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-B
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit 80000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 255712 kb for X Server offscreen at offset 0x00648000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output DIG0 transmitter setup success
Mode 1280x800 - 1415 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
freq: 69300000
best_freq: 69298571
best_feedback_div: 813
best_ref_div: 14
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 69300, PLL 69290
(II) RADEON(0): crtc(0) PLL : refdiv 14, fbdiv 0x32D(813), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output DIG0 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event13"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "3"
(**) Option "TapButton3" "2"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
I've also tried it with many xorg.conf files without finding any which give me the same graphics performance I have in ubuntu. Here's the one I was using, with the comments showing some other things I tried.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "extmod"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 60.0
VertRefresh 55.0 - 70.0
#Option "UseEdidFreqs" "1"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
#Driver "radeonhd"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS780M/RS780MN [Radeon HD 3200 Graphics]"
BusID "PCI:1:5:0"
#Added optimizations
Option "AGPMode" "8"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
#Option "AccelMethod" "XAA"
#Option "EnablePageFlip" "on"
#Option "AGPFastWrite" "yes"
#Option "XAANoOffScreenPixMaps" "1"
Option "RenderAccel" "true"
Option "DRI" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
# Option "Composite" "On"
Option "Composite" "Disable"
EndSection
#Section "ServerFlags"
# Option "AIGLX" "On"
#EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Just in case this help:
[jake@myhost ~]$ modinfo radeon
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/radeon/radeon.ko
license: GPL and additional rights
description: ATI Radeon
author: Gareth Hughes, Keith Whitwell, others.
depends: drm
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: no_wb:Disable AGP writeback for scratch registers (int)
[jake@myhost ~]$ modinfo drm
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/drm.ko
license: GPL and additional rights
description: DRM shared core routines
author: Gareth Hughes, Leif Delgass, José Fonseca, Jon Smirl
depends: agpgart,i2c-core
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: debug:Enable debug output (int)
Any ideas?
Last edited by Coward (2009-06-25 06:40:51)Coward wrote:I can't see a way to mark this thread as solved or anything, but it is solved.
Just click edit on the lower right of your first post and you can edit the subject
http://bbs.archlinux.org/viewtopic.php?id=50161 -
[SOLVED] Slow DNS lookup, I think
Hi
I have a really annoying problem. My DNS lookup in Arch is painfully slow. I know it's not a network problem, as I don't have any problems in my Ubuntu installation. I have tried to run two simple tests to show you what I mean. The first is a simple ping google.
########### Ubuntu ###########
carsten@carsten-laptop:~$ time ping -c 3 www.google.com
PING www.l.google.com (216.239.61.104) 56(84) bytes of data.
64 bytes from sn-in-f104.google.com (216.239.61.104): icmp_seq=1 ttl=245 time=17.4 ms
64 bytes from sn-in-f104.google.com (216.239.61.104): icmp_seq=2 ttl=245 time=20.6 ms
64 bytes from sn-in-f104.google.com (216.239.61.104): icmp_seq=3 ttl=245 time=11.4 ms
--- www.l.google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 11.465/16.529/20.641/3.809 ms
real 0m2.290s
user 0m0.000s
sys 0m0.004s
########### Arch ###########
carsten ~/Desktop $ time ping -c 3 www.google.com
PING www.l.google.com (216.239.61.104) 56(84) bytes of data.
64 bytes from sn-in-f104.google.com (216.239.61.104): icmp_seq=1 ttl=245 time=12.3 ms
64 bytes from sn-in-f104.google.com (216.239.61.104): icmp_seq=2 ttl=245 time=10.7 ms
64 bytes from sn-in-f104.google.com (216.239.61.104): icmp_seq=3 ttl=245 time=12.4 ms
--- www.l.google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2007ms
rtt min/avg/max/mdev = 10.776/11.867/12.476/0.778 ms
real 0m15.305s
user 0m0.013s
sys 0m0.007s
Ubuntu: 0m2.290s vs. Arch: 0m15.305s.
In the second test I tried to fake a pacman update by downloading the .db files from my primary server. On both Ubuntu and Arch I used this simple script
repos=( core extra community )
time for repo in ${repos[@]}
do
wget http://archlinux.unixheads.org/$repo/os/i686/$repo.db.tar.gz
done
When I run it in, I get this result
########### Ubuntu ###########
carsten@carsten-laptop:~/Desktop$ ./updatetest
--2008-11-10 07:58:23-- http://archlinux.unixheads.org/core/os/i686/core.db.tar.gz
Resolving archlinux.unixheads.org... 204.152.186.174
Connecting to archlinux.unixheads.org|204.152.186.174|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 32515 (32K) [application/x-gzip]
Saving to: `core.db.tar.gz'
100%[=============================================================>] 32.515 --.-K/s in 0,1s
2008-11-10 07:58:23 (331 KB/s) - `core.db.tar.gz' saved [32515/32515]
--2008-11-10 07:58:23-- http://archlinux.unixheads.org/extra/os/i686/extra.db.tar.gz
Resolving archlinux.unixheads.org... 204.152.186.174
Connecting to archlinux.unixheads.org|204.152.186.174|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 422622 (413K) [application/x-gzip]
Saving to: `extra.db.tar.gz'
100%[=============================================================>] 422.622 242K/s in 1,7s
2008-11-10 07:58:25 (242 KB/s) - `extra.db.tar.gz' saved [422622/422622]
--2008-11-10 07:58:25-- http://archlinux.unixheads.org/community/os/i686/community.db.tar.gz
Resolving archlinux.unixheads.org... 204.152.186.174
Connecting to archlinux.unixheads.org|204.152.186.174|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 369845 (361K) [application/x-gzip]
Saving to: `community.db.tar.gz'
100%[=============================================================>] 369.845 206K/s in 1,8s
2008-11-10 07:58:27 (206 KB/s) - `community.db.tar.gz' saved [369845/369845]
real 0m3.837s
user 0m0.016s
sys 0m0.036s
########### Arch ###########
carsten ~/Desktop $ ./updatetest
--2008-11-10 08:01:33-- http://archlinux.unixheads.org/core/os/i686/core.db.tar.gz
Resolving archlinux.unixheads.org... 204.152.186.174
Connecting to archlinux.unixheads.org|204.152.186.174|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 32515 (32K) [application/x-gzip]
Saving to: `core.db.tar.gz'
100%[==============================================================================>] 32,515 --.-K/s in 0.1s
2008-11-10 08:01:47 (303 KB/s) - `core.db.tar.gz' saved [32515/32515]
--2008-11-10 08:01:47-- http://archlinux.unixheads.org/extra/os/i686/extra.db.tar.gz
Resolving archlinux.unixheads.org... 204.152.186.174
Connecting to archlinux.unixheads.org|204.152.186.174|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 422622 (413K) [application/x-gzip]
Saving to: `extra.db.tar.gz'
100%[==============================================================================>] 422,622 253K/s in 1.6s
2008-11-10 08:02:02 (253 KB/s) - `extra.db.tar.gz' saved [422622/422622]
--2008-11-10 08:02:02-- http://archlinux.unixheads.org/community/os/i686/community.db.tar.gz
Resolving archlinux.unixheads.org... 204.152.186.174
Connecting to archlinux.unixheads.org|204.152.186.174|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 369845 (361K) [application/x-gzip]
Saving to: `community.db.tar.gz'
100%[==============================================================================>] 369,845 262K/s in 1.4s
2008-11-10 08:02:17 (262 KB/s) - `community.db.tar.gz' saved [369845/369845]
real 0m44.153s
user 0m0.047s
sys 0m0.017s
Ubuntu: 0m3.837s vs. Arch: 0m44.153s
I get the same update time whenever I update pacman normally.
I have googled a lot to figure out an answer, but nothing helps, so I was hoping somebody could help me figure this out, as it's very annoying. My hosts file looks like this
hosts:
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost arch
# End of file
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Asia/Singapore"
KEYMAP="dk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(e100 mii iwl3945 fuse acpi-cpufreq cpufreq_ondemand cpufreq_conservative cpufreq_powersave loop !pcspkr !snd_pcsp)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="arch"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network hal !netfs crond fam wicd cups laptop-mode oss gdm)
SPLASH="splashy"
Thanks in advance!
Last edited by Sharpeee (2008-11-15 10:39:42)Just tried to remove the "search..." line from my /etc/resolv.conf file, but nothing! It's okay if I remove the line after it connects right? Wicd overwrites the file anyways if I reconnect.
I don't really think changing to a different network-manager will help me. It works perfectly fine in Ubuntu with both network-manager and wicd, do don't think that's the problem. It must be a configuration file somewhere.
#### EDIT ####
I just tried to disable wicd and enable the wired network in /etc/rc.conf. After a reboot and it's still the same, even on the wired, so it's got be some other settings somewhere that's messing things up!
Also, for some reason my theme, in Gnome, isn't loaded after I disabled wicd? I have to manually run "gnome-appearance-manager"??
Last edited by Sharpeee (2008-11-11 05:01:46) -
[SOLVED] New Install of Gnome 3.2 doesn't feel like loading
Greetings,
Before making this post, I have spent the majority of the day trying to solve this issue. I have switched from nvidia drivers to nouvela (sp?) drivers, incase that was the issue. I have scoured google, arch-wiki, and the forums until my eyes have bled. I have dug through the xsession-errors log to search out any missing components that might be causing this... but to no avail. If anything, trying to run and try Gnome 3.2 has made me feel like a complete idiot, who has obviously learnt nothing after years of using linux. So, I come here hoping that some one can point me to the solution my brain cannot itself come up with.
Here the situation:
I have been running KDE4 for quite some time happily. I have ran Gnome 3 back in its beginning days succesfully as well, but that was an older, now dead, pc. Having seen some neat little things about the new Gnome 3.2, I got an itch to give it a try. So, I go and follow the Gnome article on the excellent arch wiki- installing both gnome and gnome extras, letting it grab everything, change from kdm to gdm, and reboot.
Well, it gives me the old gdm I remember from the early gnome 3 days (wasn't this changed) despite it showing that it is GDM 3.2 via pacman. It shows my user name, lets me put my password, and shows the stripped background. One thing to note is that the cursor remains a clock face, never changing to a pointer.
I log in, choosing GNOME, all that remains is the wallpaper, with the clockface cursor, no pointer. I go take the kids to the bus stop, come back apx. 20 min. later, no change.
Ok, bug crushing time right? So I go through the steps. I make sure that gnome shell is indeed installed. I remove any config files (there weren't any), remove gnome shell, reinstall. No go. I rinse and repeat, but removing & reinstalling different things, such as GDM, and even gnome completely. No go.
Hopping into pekwm, I search. I make copies of the xsession-errors each time, and load them in pekwm after a reboot, looking through with pacman by myside to make sure I have any possible missing files. And finally after failure after failure I give up, and come here.
So, here's my xsession-errors log. Please, if anyone can help, or even offer any kind of suggestion that might spark something in my brain to get me going in the right direction, I'd greatly appreciate it. If this thread needs moved, merged, etc, please do so... I've searched the forums, but now my brain is numb, so yeah...
/etc/gdm/Xsession: Beginning session setup...
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
gnome-session[1112]: EggSMClient-WARNING: Desktop file '/home/mythus/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
** (gnome-settings-daemon:1138): WARNING **: libltdl.so.7: cannot open shared object file: No such file or directory
** (gnome-settings-daemon:1138): WARNING **: Cannot load plugin 'Color' since file '/usr/lib/gnome-settings-daemon-3.0/libcolor.so' cannot be read.
** (gnome-settings-daemon:1138): WARNING **: Error activating plugin 'Color'
** (gnome-settings-daemon:1138): WARNING **: libltdl.so.7: cannot open shared object file: No such file or directory
** (gnome-settings-daemon:1138): WARNING **: Cannot load plugin 'Power' since file '/usr/lib/gnome-settings-daemon-3.0/libpower.so' cannot be read.
** (gnome-settings-daemon:1138): WARNING **: Error activating plugin 'Power'
GNOME_KEYRING_CONTROL=/tmp/keyring-HPDXfX
GNOME_KEYRING_CONTROL=/tmp/keyring-HPDXfX
GPG_AGENT_INFO=/tmp/keyring-HPDXfX/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-HPDXfX
GPG_AGENT_INFO=/tmp/keyring-HPDXfX/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-HPDXfX
GPG_AGENT_INFO=/tmp/keyring-HPDXfX/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-HPDXfX/ssh
** (gnome-settings-daemon:1138): WARNING **: libltdl.so.7: cannot open shared object file: No such file or directory
** (gnome-settings-daemon:1138): WARNING **: Cannot load plugin 'Media keys' since file '/usr/lib/gnome-settings-daemon-3.0/libmedia-keys.so' cannot be read.
** (gnome-settings-daemon:1138): WARNING **: Error activating plugin 'Media keys'
Gtk-Message: Failed to load module "canberra-gtk-module"
common-plugin-Message: checking whether we have a device for 4: yes
common-plugin-Message: checking whether we have a device for 5: yes
common-plugin-Message: checking whether we have a device for 6: yes
common-plugin-Message: checking whether we have a device for 7: yes
common-plugin-Message: checking whether we have a device for 8: yes
common-plugin-Message: checking whether we have a device for 9: yes
common-plugin-Message: checking whether we have a device for 10: yes
/usr/bin/gnome-shell: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
gnome-session[1112]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "if" (No such file or directory)
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/mythus/.config/tracker/tracker-store.cfg'
Initializing tracker-miner-fs...
/usr/lib/evolution/3.2/evolution-alarm-notify: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
Tracker-Message: Setting up monitor for changes to config file:'/home/mythus/.config/tracker/tracker-miner-fs.cfg'
/usr/bin/canberra-gtk-play: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
Gtk-Message: Failed to load module "canberra-gtk-module"
Starting log:
File:'/home/mythus/.local/share/tracker/tracker-miner-fs.log'
Gtk-Message: Failed to load module "canberra-gtk-module"
Gtk-Message: Failed to load module "canberra-gtk-module"
/usr/bin/pulseaudio: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
Tracker-Message: Setting up monitor for changes to config file:'/home/mythus/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/mythus/.local/share/tracker/tracker-store.log'
** Message: applet now removed from the notification area
(nm-applet:1180): libnotify-WARNING **: Failed to connect to proxy
** (nm-applet:1180): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
** (nm-applet:1180): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:1180): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
Gtk-Message: Failed to load module "canberra-gtk-module"
/usr/lib/libgvfscommon.so.0: undefined symbol: g_free
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
Last edited by mythus (2011-10-07 15:36:43)Ok, I guess all it took was for me to post this to wake up and be able to solve the issue.
It is simple really. I just needed to re-install libltdl.
So, for those searching, if you get this similar problem,
pacman -S libltdl
is what solved it for me. -
Mac Pro 2013 Slow UI Animations
I have just got a new Mac Pro, its a six core model with d300's and 64GB of RAM. My problem is that i am having real slowdown when using mission control and when sliding between spaces using the mouse. I am running 2 4K displays with "retina" mode on scaling them to 2650x1440... Though i have tested with scaling off and i still have the problem albeit slightly better than with it on...
I am beyond disappointed with this and i am really considering sending it back, is this normal or could there be something wrong with my model? My 2011 iMac handles this better even at 30 hertz its much smoother. When i use only 1 screen the animations become smooth again.. Even after a reinstall of Yosemite i still have the issues..
Is this normal? Should i send it back?Yeah was like this from day one (Yesterday ) and i didn't upgrade from an older OS it came with Yosemite pre installed. I have since reinstalled Yosemite without any change. I have also found a way to turn off "HighDPI" by holding alt to select scaled in display preferences and choosing a low resolution option. This has returned animations to super smooth! This is heartbreaking after buying 3 4K monitors and a nearly 4 grand computer
Here is my output from EtreCheck. I know there are lots of devices plugged in but last night when checked i was doing it with a clean 2 displays \(one via HDMI and one via TB). As i run this check i am not having the issue (explained how above) but i am desperate to use the 4K displays with High DPI.
Problem description:
Mission control and space switching animations slow when using scaled desktop mode with HiDPI.
EtreCheck version: 2.0.11 (98)
Report generated 14 November 2014 13:20:16 GMT
Hardware Information: ℹ️
Mac Pro (Late 2013) (Verified)
Mac Pro - model: MacPro6,1
1 3.5 GHz 6-Core Intel Xeon E5 CPU: 6-core
32 GB RAM Upgradeable
DIMM1
8 GB DDR3 ECC 1866 MHz ok
DIMM2
8 GB DDR3 ECC 1866 MHz ok
DIMM3
8 GB DDR3 ECC 1866 MHz ok
DIMM4
8 GB DDR3 ECC 1866 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en2: 802.11 a/b/g/n/ac
Video Information: ℹ️
AMD FirePro D300 - VRAM: 2048 MB
AMD FirePro D300 - VRAM: 2048 MB
ASUS PB287Q 2560 x 1440 @ 30 Hz
ASUS PB287Q 2560 x 1440 @ 30 Hz
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 11:52:57
Disk Information: ℹ️
APPLE SSD SM0256F disk0 : (251 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
OS (disk0s2) / [Startup]: 250.14 GB (214.42 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
VIA Labs, Inc. USB3.0 Hub
Inateck composite_device 120.03 GB
S.M.A.R.T. Status: Verified
EFI (disk15s1) <not mounted> : 210 MB
Boot OS X (disk15s3) <not mounted> : 134 MB
Virtual Machines (disk17) /Volumes/Virtual Machines : 119.34 GB (11.19 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk15s2 119.69 GB Online
Inateck composite_device 500.11 GB
S.M.A.R.T. Status: Verified
EFI (disk9s1) <not mounted> : 210 MB
Boot OS X (disk9s3) <not mounted> : 134 MB
Storage (disk12) /Volumes/Storage : 499.41 GB (455.58 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk9s2 499.76 GB Online
Inateck composite_device 120.03 GB
S.M.A.R.T. Status: Verified
WINDOWS EFI (disk10s1) <not mounted> : 367 MB
disk10s2 (disk10s2) <not mounted> : 119.66 GB
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
VIA Labs, Inc. USB2.0 Hub
Blue Microphones Yeti Stereo Microphone
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Apple Inc. iPad
VIA Labs, Inc. USB3.0 Hub
VIA Labs, Inc. USB3.0 Hub
Western Digital Elements 107C 4 TB
S.M.A.R.T. Status: Verified
EFI (disk6s1) <not mounted> : 315 MB
Boot OS X (disk6s3) <not mounted> : 134 MB
Delta (disk14) /Volumes/Delta : 4.00 TB (4.00 TB free)
Encrypted AES-XTS Unlocked
Core Storage: disk6s2 4.00 TB Online
Western Digital Elements 107C 4 TB
S.M.A.R.T. Status: Verified
EFI (disk5s1) <not mounted> : 315 MB
Boot OS X (disk5s3) <not mounted> : 134 MB
Charlie (disk13) /Volumes/Charlie : 4.00 TB (3.76 TB free)
Encrypted AES-XTS Unlocked
Core Storage: disk5s2 4.00 TB Online
Western Digital Elements 10B8 2 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Boot OS X (disk3s3) <not mounted> : 134 MB
Time Machine (disk8) /Volumes/Time Machine : 2.00 TB (1.93 TB free)
Encrypted AES-XTS Unlocked
Core Storage: disk3s2 2.00 TB Online
Western Digital Elements 107C 4 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 315 MB
Boot OS X (disk2s3) <not mounted> : 134 MB
Bravo (disk7) /Volumes/Bravo : 4.00 TB (1.01 TB free)
Encrypted AES-XTS Unlocked
Core Storage: disk2s2 4.00 TB Online
Western Digital Elements 107C 4 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 315 MB
Boot OS X (disk1s3) <not mounted> : 134 MB
Alpha (disk4) /Volumes/Alpha : 4.00 TB (982.95 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk1s2 4.00 TB Online
VIA Labs, Inc. USB2.0 Hub
VIA Labs, Inc. USB2.0 Hub
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus_2
Apple Inc. Macintosh
Apple Inc. thunderbolt_bus_1
Apple Inc. thunderbolt_bus_0
Kanex Thunderbolt to Gigabit Ethernet+USB3.0 Adapter
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[loaded] com.parallels.kext.hypervisor (10.0.1 27695 - SDK 10.7) Support
[loaded] com.parallels.kext.netbridge (10.0.1 27695 - SDK 10.7) Support
[loaded] com.parallels.kext.usbconnect (10.0.1 27695 - SDK 10.7) Support
[loaded] com.parallels.kext.vnic (10.0.1 27695 - SDK 10.7) Support
/Volumes/MAVERICKS/Applications/Parallels Access.app
[not loaded] com.parallels.virtualsound (1.0 22731.929773 - SDK 10.6) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.coreservices.uiagent.plist
[failed] com.apple.gamed.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.secd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.syncdefaultsd.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
[failed] com.apple.xpc.loginitemregisterd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.cache_delete.plist
[failed] com.apple.coreservices.appleid.passwordcheck.plist
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.findmymac.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.iconservices.iconservicesd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.sandboxd.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.spindump.plist
[failed] com.apple.systemstats.analysis.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
[failed] org.cups.cupsd.plist
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Messages Application (/Applications/Messages.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Storage: Disk size: 499.41 GB Disk used: 43.82 GB
OS: Disk size: 250.14 GB Disk used: 35.72 GB
Destinations:
Time Machine [Local]
Total size: 2.00 TB
Total number of backups: 6
Oldest backup: 2014-11-14 04:07:23 +0000
Last backup: 2014-11-14 12:50:29 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 79.54 GB X 3)
Top Processes by CPU: ℹ️
23% prl_vm_app
7% WindowServer
4% Skype
2% iTunes
1% Spotlight
Top Processes by Memory: ℹ️
3.68 GB prl_vm_app
172 MB prl_client_app
103 MB Skype
69 MB Finder
69 MB mds_stores
Virtual Memory Information: ℹ️
45 MB Free RAM
1.11 GB Active RAM
1.01 GB Inactive RAM
30.57 GB Wired RAM
109.00 GB Page-ins
1.93 GB Page-outs
Maybe you are looking for
-
How do i install itunes on another drive other than c
I would like to install itunes on a drive other than c drive in a fresh install to keep it free from my operating system.Itunes is not currently installed on my computer, so i dont need to transfer anything or move anything and i dont want to put itu
-
Issue in EP: Function module throwing an exception
Hi Guys, I have an Issue in EP.....which is a replica of the production system i am working on. I have an excel file to upload. I am using the function module 'text_convert_xls_to_sap' . This is working in Production sytem. But i am getting an Error"
-
Stroked type in ID not aligning w/stroke in PDF
I have a weird situation, and I'm thinking it's related to the particular font, not anything in InDesign, per se. I have some black type with a tiny (.05pt) stroke applied in ID (CS5.5). Everything looks fine on screen. However when I export a PDF, t
-
Hi all, I have Oracle 8.1.6 on Windows 2000. By mistake I downloaded iFS1.1.9 on my machine, not noticing that it is meant for Oracle 8.1.7. My question is I wish to start the iFS on my machine, ignoring the hazards and risks- if any, only for one da
-
Best practic about web document
Hi I need a handbook (best practic) about web document. can you help me? thanks.