(Solved)--Static Address problem

I set my static address according to the wiki an deverything bu it still refuses to work. I have to use dhcpcd eth0 everytime i boo to make my connection work. Here are a few files:
rc.conf
eth0="eth0 192.168.1.10 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
/etc/hosts
<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost tux
192.168.1.10 tux.domain.org tux
Anything wrong from this?
Last edited by b0uncyfr0 (2010-03-10 07:52:51)

tomk wrote:
chakra-user, ifconfig commands are not persistent across a reboot. That's what config files are for.
b0uncyfr0, "refuses to work" is vague. What doesn't work exactly? Paste your ifconfig and route output, and the contents of /etc/resolv.conf.
Ahh well what I meant is that in addition to entries in /etc/rc.conf reg. static IP address and network in DAEMON Array, I did this ifconfig commands and had my eth0 up and running. I know it does not persist across reboots but somehow inspite of having the rc.conf stuff in, it did not wrk but when I ran the rc.conf + ifconfig it worked. Magic Mantra
inaddition, I saw two lines of eth0="dhcp" in default rc.conf, I had done that also just incase it helps one or all of it together made my eth0 come up. I have now removed duplicate eth0="xxx" entries, removed NetworkManager and kept network and everything works. It is sad that these things must be working in stock install of Arch/Chakra but users have to struggle for such simple things.

Similar Messages

A solution for Secure Static Versioning problem in 1.5.0_10

Hi,
I have JRE 1.3.1_09 and 1.5.0_10 on my computer and I think I have solved static versioning problem.
My test computer:
- Windows XP sp2
- Internet Explorer 7 (on another computer also IE 6)
- Firefox 2.0.0.1
- JRE 1.3.1_09
- JRE 1.5.0_10
I. Solution for Internet Explorer 6 and Internet Explorer 7
1. Edit registry and add:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Deployment\Policy
DWORD: EnableSecureStaticVersioning = 0 (Hex)
2. Restart browser if started.
3. Start web page with java applet.
II. Solution for Firefox 2.0.0.1:
1. Install 1.3 JRE in the same parent directory as 1.5 JRE.
Because default default installation path for 1.5 JRE is C:\Program Files\Java\jre1.5.0_10 you need to modify
1.3 installation path from default C:\Program Files\JavaSoft\JRE\1.3.1_09 to C:\Program Files\Java\jre1.3.1_09
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
2. Install 1.5 JRE in default installation directory: C:\Program Files\Java\jre1.5.0_10.
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
3. Restart browser if started.
4. Start web page with java applet.
Note: HTML page must use <object> tabs for Internet Explorer or <embed> tabs for any other browser (e.g. Firefox). You need to specify correct classid in object and/or embed tag.
P.S. If anyone would like to discuss with me send me an e-mail to [email protected], but please post question to forum and just mail me a link to forum. I will write my answer to forum.
Hope this helps,
Grofaty

I have been trying to find a solution for this issue at our organization for over 6 months. Finally, we have a work around to run multiple java versions for newer and aging java apps.
Thanks,
Adunlow

SG200-8 Static mac address problem

Hi!
My second problem with sg200-08 (firmware: SG200-08x_FW_1.0.6.2.stk) is when I try to add specific MAC address as secure:
MAC Address Tables - Static Addresses - Add; insert vlan id, port, mac address and select "Secure":
I get error message: "Error: Failed to Add 'Static Address' entry.
Again, thanks for reply!
Best regards,
Boris Bahes.

Moritz Lipfert wrote:I have the same problem using the current firmware 1.0.6.2. But even an upgrade by TFTP followed by a factory reset does not help. A downgrade to firmware 1.0.5.1 also does not fix this issue.Are there any other suggestions?
Strange as it may sound, try playing with compatibility mode in Internet Explorer. I have found that these switches interface respond well only in IE.

WRT54G Ver. 6 static WAN address problem

So here is the issue I am having. I have a WRT54G version 6 running firmware version 1.02.2 (just uploaded the new firmware this afternoon). The WAN interface is a static address from the T1. Evertime the Linksys loses power (very dirty power here) the unit loses its connection to the Internet. LAN traffic is fine, as is traffic to WLAN hosts, but no host can access the Internet. If I goto the basuc setup page, re-type the Internet IP address and save the changes (even thought there were none) the Internet is accessable again. Any ideas what is causing this? I've been updating the firmware in hopes that it solves it. The unit was already RMAd to Linksys and they sent me a new unit. I am suspecting a bug in the firmware is causing it but want to make sure. Guess it might be time to move to a Sonicwall.....

I would have to agree. The WRT54G was designed for a home user with a lesser connection speed. Linksys does have business class wired and wireless routers as well. Personally I prefer a RV082 or a RV016 with T1 connections and if a WLAN is needed then add a access point. That way you will have a lot more options and services such as VPN, Web hosting, FTP to keep all of your companies documents in a central location, etc.. etc..
Richard Aichner (Ikester)

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Aironet 1100 with Static Address

Hi All
I have taken over some access points from a company which were providing our wireless service and have not yet received the IP scheme information.
I need to get onto one of the Aironet 1100 access points to see what the config etc is.
I will only be able to take it down for a few hours, how to I actually connect to it.
I am pretty sure it is configured with a static IP address which I do not know so is there anyway of connecting to it without using the Reset to Default method obviously!
I have tried IPSU and a hub but no good.
All replied gratefully received!!
Darran

Thanks for the replies guys but it hasnt solved my problem.
Looks like it's not a static address after all
I have done the following
1. Plugged the AP into a switch on our network and connected to it wirelessly. I receive an IP the very same as if I was plugged into the switch directly and when I do an IPconfig I get the very same info as if I was plugged directly in. Still cannot find the AP IP Address though.
2. Plugged the AP into a switch on our network and connected to the switch and did a show cdp neighbour, the access point does not show up, only other switches.
3. Read the user guide and connected my laptop directly to the AP with a CAT 5 cable and gave the laptop an address of 10.0.0.2 . The AP does not seem to revert to 10.0.0.1 as suggested in the manual.
4. I have tried to run the IPSU under all the above conditions, searching by the mac address of the AP but it has not received anything.
ANy other ideas, Im at my wits end!!

Windows 7 / 2008 duplicate static address when using 802.1x / MAB - ISE

Hi all!
ISE 1.1.3
Cisco 3750 switches
Windows XP / 7 / 2008 clients
I'm having some weird issues were if a client connects to a switchport and happens to be using a static IP address then the client warns of a duplicate address problem. Also the client will then only show the default gateway within ipconfig even though the IP address / mask is still in the GUI network properties of the adaptor. This is happening with Windows 7 and Windows 2008 devices.
Windows XP clients don't get the issue.
Some clients will use 802.1x native supplicant and some will be authenticated based on MAB. Not noticed the problem with 802.1x clients but it always occurs on MAB.
I came across a similar issue here:
http://networkingblog.vvlabs.com/2012/07/cisco-ise-duplicate-ip-address-windows-7.html
Going of that blog I tried using the "ip device tracking delay probe delay" command but the switches don't recognise the "delay" keyword.
The switches are 3750 switches running version 12.2(58)SE2.
All I have is "count, interval, use-svi" as extra options.
Catalyst 4500 switch guide has "delay" option but no "count, interval or use-svi".
The only way I have managed to avoid the problem is using the second solution which is a registry hack on each client. This is fine for the odd server but not realistic when there will be hundreds of other clients.
Any ideas?

Hi
We are doing 802.1x for clients using the Windows supplicant. For clients not using supplicants we are using MAB. So the print servers and printers use MAB.
Extract of config...
aaa new-model
aaa authentication login default local
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa accounting system default start-stop group radius
aaa server radius dynamic-author
client x server-key 7 x
client x server-key 7 x
aaa session-id common
clock summer-time BST recurring last Sun Mar 23:00 last Sun Oct 23:00
system mtu routing 1500
vtp mode transparent
authentication mac-move permit
ip routing
no ip domain-lookup
ip device tracking
dot1x system-auth-control
dot1x critical eapol
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet1/0/1
description ### Dot1x with MAB fallback ###
switchport mode access
switchport voice vlan 2
ip access-group ACL-DEFAULT in
srr-queue bandwidth share 10 10 60 20
priority-queue out
authentication event fail action next-method
authentication event server dead action authorize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer restart 0
authentication timer reauthenticate server
authentication violation restrict
mab
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
dot1x pae authenticator
dot1x timeout tx-period 5
spanning-tree portfast
service-policy input AutoQoS-Police-CiscoPhone
ip http server
ip http secure-server
ip access-list extended ACL-DEFAULT
remark Deny access to new network
deny ip any 172.x.x.x 0.0.0.255 log
remark Allow everything else to other networks
permit ip any any
ip radius source-interface Vlan2
logging esm config
logging host x transport udp port 20514
logging host x transport udp port 20514
radius-server attribute 6 on-for-login-auth
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 30 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-1
address ipv4 x auth-port 1645 acct-port 1646
key 7 x
radius server ISE-2
address ipv4 x auth-port 1645 acct-port 1646
key 7 x

Can't set ipv6 static address

As the topic states, I can not setup a static IP to save my life. I've enabled ipv6, I have a hostname6.ce1 I put the hostname (madrid-ipv6) in the hostname6.ce1 file but it will not stay set.
I've tried the addif command, and it creates a logical interface, but I can't ping out with the address that is set.
I'm sure I am missing something, and I am new to Solaris. I've got ipv6 static addresses setup in linux with no problems. It's just Solaris 10 that is kicking my butt.
If anyone can point me in the right direction I would be in your debt.
Thanks!

edit: To darren: I've tried that as well. When the system boots, it gives me the error: "Failed to assign ipv6 address to ce1" or something similar to that.
hmmm, I've tried that, it still doesn't seem to be working. Here is my hostname6.ce1 file:
madrid-ipv6
addif fd01::e2/64 up
this is the output of ifconfig -a6:
bash-3.00# ifconfig -a6
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
ce0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
inet6 fe80::203:baff:fe9b:92d/10
ether 0:3:ba:9b:9:2d
ce1: flags=2000840<RUNNING,MULTICAST,IPv6> mtu 1500 index 3
inet6 fe80::203:baff:fe9b:92d/10
ether 0:3:ba:9b:9:2d
ce1:1: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 3
inet6 fd01::e2/64
and this is what I get when I ping fd01::f2:
bash-3.00# ping fd01::f2
ICMPv6 Address Unreachable from gateway fd01::e2
for icmp6 from fd01::e2 to fd01::f2
ICMPv6 Address Unreachable from gateway fd01::e2
for icmp6 from fd01::e2 to fd01::f2
ICMPv6 Address Unreachable from gateway fd01::e2
for icmp6 from fd01::e2 to fd01::f2
I've got to be missing something. This is all on a private switch that doesn't need to connect to the net. I need to connect an iscsi VTL to this sun system but the first step is to be able to ping the damn thing. I've checked the networking to make sure everything is connected. I can ping the VTL using IPV4, but not IPV6. I've checked on a linux system and it can ping the VTL over IPV6 so I know it is setup properly. This is just driving me nuts.
Edited by: jonwheeler on Sep 11, 2008 9:47 AM

A non-solution to the static distortion problem

I don't know if there's any chance of the following "solution" having value to anyone else but I'll submit it to be filed in the "For What It's Worth" folder.
First, by way of preamble, I've upgraded iTunes a number of times now (going back to v. 4.6.0.15) and this is the first time I have had any sort of issue - the static/distortion problem that is presently being much-discussed in these forums.
Following the leads in the early threads on this topic, I played a handful of song files with QuickTime and confirmed that everything sounded fine with that player.
I went back to iTunes and the problem remained, although it struck me that it wasn't as severe as it had been.
I continued playing songs, hoping for some sort of insight into what had gone wrong when it slowly dawned on me that the static/distortion had ended ... and I hadn't done anything - changed settings or anything else - except simply play songs.
iTunes has been playing for a couple of hours now with no further sign of the problem.
One final point of information, I'm guessing it was after having played in the area of 10-15 songs when the problem seems to have solved itself.

I'll also add that I've since re-enabled the options I originally changed to "fix" my problem. I'm no longer getting the distortion, even with the options I changed.
I'm not sure what's going on.. I guess I'm just glad my music is back to normal and that I can browse the Internet AND listen to music!

TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

In the course of your troubleshooting to date, have you also worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

How to use both wired and wireless connection with static addresses

Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

Need to solve serious security problem with Oracle Reports URL

As mentioned repeatedly on this forum, Oracle Reports allows serious security breaches that allow users to see reports that they did not generate -- it's easy to guess a legal URL by changing the getjobid parameter.
I've reviewed the JavaDocs to part of the rwrun.jar file and reviewed some of the example report plugins. This shows promise in helping to solve this security problem but critical pieces are missing.
1) The javadocs are accurate for only 10g (9.0.4) but not correct for 10g (10.1.2+), which we are currently using. I need access to the updated version of this javadoc.
2) Even with the updated version of the JavaDoc, I haven't found a class from which to inherit that would give me the opportunity to generate random jobid values, which then would effectively prevent users from guessing other jobid values, and thereby gaining access to other's reports (which in our cases, may contain sensitive information.
3) We have found that we can send the parameter=value of EXPIRATION=1 which helps protect such information, but this requires that every program which invokes a report be modified to add this parameter. It would be far better for the report server to be configured to use a java class we write that inherits from some rwrun.jar class that would by default, add the EXPIRATION=1 parameter.

Hi,
Thanks for our replies. I will ask to an administrator about this security problem, now I know it depends of a security parameter.
But I would know if it could be possible to hide the technical name of the query in the url. It could improve the security level of our reports in a first time in this way.
Thanks a lot,
JW.

HT1145 Dear Ms Apple....My wi fi shows Not configured..please suggest me a solve out this problem soon..

Dear Ms Apple....My wi fi shows Not configured..please suggest me a solve out this problem soon..

Ms Apple is away from the desk but maybe I can help. If you open system preferences you'll see icons. Click on the one that says "Network". You should see somthing like this
Make sure that Wifi is turned on (gree light). This is a box in the upper right that says "Turn Wifi On". Click that box. Now your radio is on. To connect to a wifi network, select the icon in the upper menu bar that I've circled.
You can chose a network to join from the listed networks. You can also turn on wifi from that top line menu button but I think everyone be familar with system preferences. You'll go there a lot in your mac life.

How can i solve this replication problem between TT and ORACLE

Hi
I have an application that using AWT cashgroup implement the replication between TT (7.0.6.7) and ORACLE(10g);
but i encounter this problem:
16:16:50.01 Err : REP: 2302682: ABM_BAL_WH:meta.c(4588): TT5259: Failed to store Awt runtime information for datastore /abm_wh/abm_bal_ttdata/abm_bal_wh on Oracle.
16:16:50.02 Err : REP: 2302682: ABM_BAL_WH:meta.c(4588): TT5107: TT5107: Oracle(OCI) error in OCIStmtExecute(): ORA-08177: can't serialize access for this transaction rc = -1 -- file "bdbStmt.c", lineno 3726, procedure "ttBDbStmtExecute()"
16:16:50.02 Err : REP: 2302682: ABM_BAL_WH:receiver.c(5612): TT16187: Transaction 1316077016/357692526; Error: transient 0, permanent 1
the isolation level of my date store is read-committed ,and the sys.ODBC.INI file is also set Isolation=1(readcommitted mode)
so ,I still wonder how the error ORA-08177!
how can i solve this replication problem?
thank you.

I suspect this is failing on an UPDATE to the tt_03_reppeers table on Oracle. I would guess the TT repagent has to temporarily use serializable isolation when updating this table. Do you have any other datastores with AWT cachegroups propagating into the same Oracle database? Or can you identify if some other process is preventing the repagent from using serializable isolation? If you google ORA-08177 there seem to be ways out there to narrow down what's causing the contention.

Can you please help solve my sudden problem saving photos in version sets?

Saving edited photos in Version Set
Ever since I have owned the excellent Adobe Photoshop Elements 4.0, I have saved edited photos in a version set with the original. Now, in spite of the 'save in Version Set' box being ticked, they are saved separately. When the edited photo is saved, it says 'imported from hard disk'. It has never said this before.
When the photos are imported from the camera, they are saved in Adobe/Digital Camera Photos/code provided by photoshop (eg 2006-03-10-1632-38). Under properties/history it says imported from Panasonic DMZ-TZ3. This has not changed. All the saving arrangements appear to be unchanged.
Photos (thousands!) have been successfully edited and saved in a Version Set. Under properties/history it says 'edited version' and 'imported from Panasonic DMZ-TZ3'.
Suddenly, photos that have been edited and should have been saved in a version set, now say under properties/history nothing about being edited. They say 'imported from hard disk'. In other words they are being treated as a new photo.
I really hope you can help me to solve this infuriating problem. Please ask if you need more information.
I work on a PC with Windows XP
Michael

Michael: are you still using an old version o0f PSE (e.g. PSE V4)? Problems similar to the one that you described are relatively frequent in old PSE Versions ( I was suffering a lot from them)..... and there are quite seldom in newer PSE versions. Unfortunately, I do not remember which PSE Version became much better in this area (was it V5? or V6?)
If using an older PSE version and encoutering often the problem: consider to migrate to a newer PSE Version..

(Solved)--Static Address problem

Similar Messages

Maybe you are looking for