A solution for Secure Static Versioning problem in 1.5.0_10
Hi,
I have JRE 1.3.1_09 and 1.5.0_10 on my computer and I think I have solved static versioning problem.
My test computer:
- Windows XP sp2
- Internet Explorer 7 (on another computer also IE 6)
- Firefox 2.0.0.1
- JRE 1.3.1_09
- JRE 1.5.0_10
I. Solution for Internet Explorer 6 and Internet Explorer 7
1. Edit registry and add:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Deployment\Policy
DWORD: EnableSecureStaticVersioning = 0 (Hex)
2. Restart browser if started.
3. Start web page with java applet.
II. Solution for Firefox 2.0.0.1:
1. Install 1.3 JRE in the same parent directory as 1.5 JRE.
Because default default installation path for 1.5 JRE is C:\Program Files\Java\jre1.5.0_10 you need to modify
1.3 installation path from default C:\Program Files\JavaSoft\JRE\1.3.1_09 to C:\Program Files\Java\jre1.3.1_09
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
2. Install 1.5 JRE in default installation directory: C:\Program Files\Java\jre1.5.0_10.
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
3. Restart browser if started.
4. Start web page with java applet.
Note: HTML page must use <object> tabs for Internet Explorer or <embed> tabs for any other browser (e.g. Firefox). You need to specify correct classid in object and/or embed tag.
P.S. If anyone would like to discuss with me send me an e-mail to [email protected], but please post question to forum and just mail me a link to forum. I will write my answer to forum.
Hope this helps,
Grofaty
I have been trying to find a solution for this issue at our organization for over 6 months. Finally, we have a work around to run multiple java versions for newer and aging java apps.
Thanks,
Adunlow
Similar Messages
-
Solution for removing unsafe versions of flash player embedded in HP apps?
Windows 7 64 bit IE 9 Flash Player 10.3.183.10 (the most current I can get--I have read the discussion on the update issues.) I have a 5 week old Dell system and have had an HP Officejet installed for 3 weeks. My security software detected 2 security vulnerabilities; one "Highly Critical" and the other "Extremely Critical." These are Flash Player 9.0r115 and version 10.0. Both are embedded in the HP printer setup files from the installation disk. These versions must be updated/patched for best system security. The problem is that while I have the updated version of Flash Player on my computer, the versions in these HP apps stubbornly refuse to be updated--and can't be uninstalled without activating annoying little nag boxes which constantly pester me to reinstall the HP "Solution Center" at each logon. After 3 weeks, this app suddenly decided that an .exe file was incompatible and the only thing that is different is the fact that I uninstalled (deleted) the outdated/dangerous Flash Players when they could not be updated. HP's technical support suggested that I uninstall the Solution Center entirely--but I got a warning that I would no longer be able to use my printer. Their only other advice was to "contact Adobe". Do you have any suggestions as to how to make Flash Player "play nice" with the Solution Center?---preferably the correct, updated version of Flash Player, so as to avoid any security issues---and how I might get that correct version installed in the correct file path? Thank you for any help that you can give me.
I suggest that you uninstall all FP versions using the uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html
Download the installer(s) from http://forums.adobe.com/thread/889580 and reinstall. -
Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows
When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed). -
Finally a SOLUTION for the black-screen problem!
It took me almost a MONTH to find a solution to this wide-spread problem - and I had to do it by myself.
I've got a Qosmio x300 (about 18 months old) and started having the black screen / lock-down problem about 6 months ago but it was sporadic. When it started getting worse, I took it in for repair, made sure it was cleaned religiously, had both a cooling pad and household fan directed at it to eliminate any possible overheating issue, made sure all of the *Toshiba* drivers were up to date according to their site, etc... The problem kept getting worse - to the point where I couldn't even open a browser without the dumb thing crashing. VERY frustrating to say the least.
Finally I gave up - I removed the nVidia driver that ran the GeForce 9700M GTS video card and used the standard VGA driver. No more lock downs, but it limited what I could do because the on-board memory wasn't being utilized. I re-installed the *Toshiba* drivers for the card and presto - lock-downs again.
Fed up, I went directly to the nVidia download page and chose to have it automatically detect my card. Now, granted, it says to try to use the OEM versions of graphics, but Toshiba's drivers are FLAWED! I installed the driver suggested directly from nVidia, and what do you know? Full use of the card again and not a single crash!
I hope all of my frustration, and the solution that resulted from it, can help someone else not have to waste time, money, and hair on their heads as it did with me. =) The sad part about it all - this is a TOSHIBA flaw that affects a wide range of systems and models - and nothing has or is being done about it.
Good luck! =)
Dave (Montreal, Canada)Which version of the nVidia driver did you use?
-
A non-solution to the static distortion problem
I don't know if there's any chance of the following "solution" having value to anyone else but I'll submit it to be filed in the "For What It's Worth" folder.
First, by way of preamble, I've upgraded iTunes a number of times now (going back to v. 4.6.0.15) and this is the first time I have had any sort of issue - the static/distortion problem that is presently being much-discussed in these forums.
Following the leads in the early threads on this topic, I played a handful of song files with QuickTime and confirmed that everything sounded fine with that player.
I went back to iTunes and the problem remained, although it struck me that it wasn't as severe as it had been.
I continued playing songs, hoping for some sort of insight into what had gone wrong when it slowly dawned on me that the static/distortion had ended ... and I hadn't done anything - changed settings or anything else - except simply play songs.
iTunes has been playing for a couple of hours now with no further sign of the problem.
One final point of information, I'm guessing it was after having played in the area of 10-15 songs when the problem seems to have solved itself.I'll also add that I've since re-enabled the options I originally changed to "fix" my problem. I'm no longer getting the distortion, even with the options I changed.
I'm not sure what's going on.. I guess I'm just glad my music is back to normal and that I can browse the Internet AND listen to music! -
Solution for a "colour picker" problem.
Hello, I had the most annoying problem with "Colours" in DreamWeaver 8. I just couldnt seem to get DreamWeaver to select colours from the page I was working in. I could select colours from the colour popup or "swab", but trying to match colours with imported images or other content by putting the "eye dropper" on them in the page itself and selecting just didnt work, it was so frustrating, and time consuming, to say the least. Lots of people here came in with suggestions, but all to no avail. I eventually tracked the problem down, (after about a week) to a little security program on my system called "Snoop Free", which blocks Keyloggers and Screen Readers, and by going into "Snoop Free's" control panel and allowing DreamWeaver access to my screen, the problem was finally "nailed". At the suggestion of "JayJahbrix", I am writing this, as it may help someone else, as I know only too well how frustrating this can be. It might not be "Snoop Free" on your system, but when experiencing problems like this, its always worth checking for solutions outside of DreamWeaver, or whatever software it might be. Check drivers, and defenitely check security software for conflicts. Thanks again to all who stuck with it on my behalf
I'm glad you got it all sorted. But the funny thing is I don't use the DW color picker tool much.
I begin projects with a pre-selected color pallet and a very handy free utility from Iconico called COLOR PIC. Honestly, can't work without this tool.
http://www.iconico.com/colorpic/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
Bizarre solution for OfficeJet Pro K5300 problem when Word docs hang in the print queue spooling
A bizarre solution to a spooling problem.
Problem:
Word documents sent to an HP Officejet Pro K5300 Series printer hang in the print queue, saying “spooling”. They do not print, and cannot even be cancelled.
Solution (Bizarre Solution).
The solution that worked for me was to rename the printer by removing the first space after “HP” in the printer’s name. When I did this, Word could then print to the printer. If the space is then re-inserted back into the printer-name then Word is still able to print!! I don’t know how, but it worked, and it worked on two separate installations! The full explanation is below with more options for testing that still need to be explored, or preferably explained by HP and or Microsoft.
First here is some background. My computer is an IBM NetVista 2.4GHz, P4. It has a 250GB HDD with lots of room and 2GB of RAM. My operating system is Win XP Pro with Service Pack 3. My anti-Virus in Trend Micro Internet Security 2009, updated regularly, (I turned it off while installing the printer software). I use Office Professional 97, with Office SP2b).
I bought a new HP Officejet Pro K5300 printer.
I installed the printer software, and followed HP’s directions strictly. I used the installation CD that was supplied by HP. My connection to the printer was USB.
The installation proceeded uneventfully and I printed a test page after it finished.
After that I printed a configuration page, then I printed a couple of photographs using Irfan View. The quality was great and I was pleased.
Then I tried to print a 2-page Word document, using Word 97, but nothing happened. No response from the printer, no error messages, just silence. I clicked on the printer icon on the task bar to look at the print queue and saw that my document was listed as “Spooling”, but it was not making any progress. I waited a couple of minutes but still no progress. I tried canceling it but it would not cancel/delete. The job on the queue would not respond to anything. I could not print it and I could not cancel it. The only way I could recover was to shut down Word, which flushed the queue and lost the job.
I tried this a few more times but with no success.
I did a Google search for this problem, and I found a few solutions. I tried them, but none worked. I checked HP’s website and found this problem listed, with some solutions from HP. I tried HP’s solutions, but they did not work either. In fact, when there was a Word document stuck “spooling” in the queue, HP’s diagnostic utility said that it could not even communicate with the printer, and suggested that my USB connection was bad. However, when I flushed the queue by shutting down Word, I could successfully send a Test Page to the printer, and I could print a detailed PDF from Adobe. So Word was the problem, not my USB connection.
After a pondering this problem over the next few days, and keeping in mind the fact that the default HP printer-name was “HP Officejet Pro K5300 Series”, I remembered that many years ago I could not get an Excel VB macro to select a printer, and print to it, if the printer-name had any spaces in it. I had noticed that the HP default printer name had 4 spaces in it, so I wondered what would happen if I renamed the printer by removing the spaces from its name.
So I renamed the printer to “HPOfficejetProK5300Series” (no spaces), and voila! Word could now print to it!
Then I wondered, if it was necessary to remove all of the spaces from the name, or just some of them, to get the printer to work, so I renamed the printer back to it’s default name in 4 stages, at each stage re-inserting one of the original spaces, and testing the printing. At each stage the printer kept successfully printing from Word, until I had re-inserted all four spaces and the printer’s name was back to being identical to the default name that it was installed with, but now it would print from Word on command.
So why was it that Word could not get the printer to print with the printer’s default installed name, but if I removed all of the spaces from the printer’s name, then re-inserted them, the printer would print from Word every time?
So I did another test.
I uninstalled the entire printer software package and installed the updated Full Feature software package, filename “OJProK5X00_Full_8_3.exe”, 159MB download from HP.
After the package was installed, Word could NOT print to the printer, but other programs like Adobe PDF reader, and Irfan View, could print to it. I tried each software package about three times each, with consistent results.
I then renamed the printer, but this time I just removed the first space after the letters “HP”, i.e., I changed the printer’s name from “HP Officejet Pro K5300 Series” to “HPOfficejet Pro K5300 Series”. After I did that Word could then print to it. I then changed the printer’s name back to “HP Officejet Pro K5300 Series” by re-inserting the first space, and Word could still print to it now.
I challenge someone from HP to read this and explain why Word won’t print to this printer until I rename the printer by removing a space, but can still print to it after the space is re-inserted!
Of course, there is another alternative. Perhaps I could have renamed the printer by removing or changing any of the other characters, instead of the spaces. But each test involves completely uninstalling and re-installing the software, and I have better things to do with my time.
This question was solved.
View Solution.What an amazing solution!
I recently purchased an HP Deskjet F4580 and had discovered that when using Word 97, it would print OK when using the Print icon but when trying to print using File->Print->choose page number or current page, Word would crash. Excel, Adobe etc would all print fine. I have spend many hours removing and then reloading the HP software and Office Professional software but this solution fixed the problem in a few minutes. PC is running XP Home SP3.
Just one thing I would add is that my computer has two accounts - one is the Computer Administrator account and the other is a Limited account. When I took out the space between HP and Deskjet so the printer became HPDeskjet F4500 series, I could then print from the Administrator account using either the print icon or File->Print->choose page number or current page. When I switched to the Limited account, I would get the same crash when I tried File->Print->choose page number or current page (OK with icon). The Limited account mode does not allow the printer to be re-named.
I went back to Admin mode, re-classified the Limited account as a Computer Administrator account, logged on to this account and re-named the printer (in this case I took out another space so it became HPDeskjetF4500 series. Then it printed fine using the print icon or using File->Print->choose page number or current page. I then went back to the Computer Administrator account, re-named the printer to HPDeskjet F4500 and re-classified the second account back to Limited account mode. Now printing OK in both Computer Administrator account mode and Limited account mode.
Thanks again! -
More elegant solution for error "Current version of data in database..."
When two users try to manipulate the same record in a form, one of them gets the "Current version of data in database has changed since user initiated update process." when updating.
I'd like a more elegant solution (or prevention) of this situation by disabling the update button on the form of the second user who opens the record and display a message on the page that the record is currently opened by another user, so it is only available in "read-only mode" by the other user.
How can I do something like this? Or what are the multi user policies that other apex developers on the forum use and how are they implemented?I don't think I would disable anything, as you need to consider the situation where someone opens a record, then goes to lunch.
You might update 2 columns such as "last_opened_on" and "last_opened_by" for the row. Then when the 2nd person opens it you could display a prominent indicator (red+bold) if it was opened by someone else in the last 10 min, as well as showing who opened it last. If it hasn't been opened in over 8 hours, you could basically de-emphasize that indicator by making it light gray or something. The goal is not to lock or disable anything, but warn a user when they open a record that was recently opened. If logistically possible, this gives them the opportunity to call / IM each other to coordinate.
Tyler Muth
http://tylermuth.wordpress.com
[Applied Oracle Security: Developing Secure Database and Middleware Environments|http://sn.im/aos.book] -
Apple's "Solution" for Blue-Screen Crashing Problem
Good Morning,
For those of you thinking of calling Apple's Technical Support for help about the Blue-Screen crashing issue, don't bother.
I just got off the phone with Tech Support about the blue-screen crashing issue. After waiting 15 minutes for help, the first thing they did was act as if I were the first person to report this problem. The tech support guy finally admitted that Apple has received thousands of calls on this matter in the past couple of days.
When I asked for a solution, the only thing the tech support guy offered was to have me disconnect all my external devices, then restart Windows and disable various services, the restart my computer, then reconnect my external devices, then reconnect the iPod, then restart the computer again...Absolutely ridiculous.
I did all these steps, and I got the iPod to work once. But when I restarted my computer again, the problem returned.
So, after a lot of wasted time, I'm back to where I started.
I'm getting rather angry about this.
Apple needs to fix this problem -- TODAY
How could Apple release a new version of iTunes with this problem?
If you call Tech Support and they try to tell you they have not heard of this problem before, just give them this list of links to discussions concerning the crashing issue:
http://discussions.apple.com/thread.jspa?threadID=1703809&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1705339&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1700339&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1706206&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1701063&tstart=0
Thanks,
MatthewGood Morning,
For those of you thinking of calling Apple's Technical Support for help about the Blue-Screen crashing issue, don't bother.
I just got off the phone with Tech Support about the blue-screen crashing issue. After waiting 15 minutes for help, the first thing they did was act as if I were the first person to report this problem. The tech support guy finally admitted that Apple has received thousands of calls on this matter in the past couple of days.
When I asked for a solution, the only thing the tech support guy offered was to have me disconnect all my external devices, then restart Windows and disable various services, the restart my computer, then reconnect my external devices, then reconnect the iPod, then restart the computer again...Absolutely ridiculous.
I did all these steps, and I got the iPod to work once. But when I restarted my computer again, the problem returned.
So, after a lot of wasted time, I'm back to where I started.
I'm getting rather angry about this.
Apple needs to fix this problem -- TODAY
How could Apple release a new version of iTunes with this problem?
If you call Tech Support and they try to tell you they have not heard of this problem before, just give them this list of links to discussions concerning the crashing issue:
http://discussions.apple.com/thread.jspa?threadID=1703809&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1705339&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1700339&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1706206&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1701063&tstart=0
Thanks,
Matthew -
Solution for flash player crashing problem
This fix works pretty well, as all the latest versions of flash crash continuously, on almost every video.
First, download these two items:
Flash player Uninstaller
1. Flash player Uninstaller - http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe
Flash 10.3.183.25
1. http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
[Editors Note: I updated the link to point to the Flash Player archives page, instead of the non-Adobe site. Please, ALWAYS download Flash Player directly from Adobe to ensure you have a valid, authentic copy. Malware distributors often attempt to trick users into installing malicious files by naming them as legitimate software programs. Wherever possible, always download software from the author's site.]
Run the Uninstaller (with browsers closed).
Then run the new Installer. You should not have problems anymore.
This version also switches from full screen and back, smoothly (without freakin crashing).
So far, it is running smooth as a lamb. I have no idea what is wrong with the other versions of flash player, but it is annoying. Even the very latest version crashes.
I am back to enjoying videos again, hope you will be too. :-)Here are 4 links. I hope these are right, never looked at this data before.
http://crash-stats.mozilla.com/report/index/bp-03db7b83-ee55-4ba3-8a78-b5dc12121003
http://crash-stats.mozilla.com/report/index/bp-a40cda36-9a16-40fc-b39f-85fe62121003
http://crash-stats.mozilla.com/report/index/bp-94add72e-1ac6-4957-9c6e-b0e822121003
http://crash-stats.mozilla.com/report/index/bp-8a3371b0-ead0-4e32-a212-aa3c72121003
The freezes, crashes, green screen, etc occor basically on any video. for ex https://vimeo.com/50512991 , http://www.youtube.com/watch?v=YfulqRdDbsg
Basically if i am doing nothing and just let it play a freeze, crash, green screen, etc will occur sooner or later. But skipping through the video will also result in such behavior.
I have these GT220 drivers (306.23) installed already.
hardware acceleration is permanently off indeed.
Here's a list. But you know, i think i have ruled out the plugins and addons already because i also used flash on a fresh Firefox install and on a complete new profile without any plugins and addons installed.
Application Basics
Name
Firefox
Version
15.0.1
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:15.0) Gecko/20100101 Firefox/15.0.1
Profile Folder
Show Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Crash Reports
about:crashes
Memory Use
about:memory
Extensions
Abduction!
3.0.14
true
{b0e1b4a6-2c6f-4e99-94f2-8e625d7ae255}
Adblock Plus
2.1.2
true
{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Add to Search Bar
2.0
true
[email protected]
Adobe Acrobat - Create PDF
1.2
true
[email protected]
BetterPrivacy
1.68
true
{d40f5e7b-d2cf-4856-b441-cc613eeffbe3}
Collusion
0.16.3
true
jid1-F9UJ2thwoAm5gQ@jetpack
Download Statusbar
0.9.10
true
{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}
Fasterfox Lite
3.9.9Lite
true
FasterFox_Lite@BigRedBrent
Flash Video Downloader Youtube Downloader
3.7.0
true
[email protected]
Greasemonkey
1.3
true
{e4a8a97b-f2ed-450b-b12d-ee082ba24781}
LiveClick
0.5.0.0b3
true
{d166ee2a-36bb-4f33-aff7-e85f912df509}
NoScript
2.5.6
true
{73a6fe31-595d-460b-a920-fcc0f8843232}
ShareMeNot
2.0.2
true
[email protected]
Soundcloud.com: Enable downloading for every track
0.4
true
[email protected]
United States English Spellchecker
6.0
true
[email protected]
TrackMeNot
0.7.87a
false
[email protected]
Important Modified Preferences
browser.cache.disk.capacity
76800
browser.cache.disk.smart_size.first_run
false
browser.cache.disk.smart_size_cached_value
1048576
browser.places.smartBookmarksVersion
4
browser.startup.homepage_override.buildID
20120905151427
browser.startup.homepage_override.mstone
15.0.1
extensions.lastAppVersion
15.0.1
gfx.direct2d.disabled
true
gfx.direct3d.prefer_10_1
true
layers.acceleration.disabled
true
network.cookie.prefsMigrated
true
network.dnsCacheEntries
512
network.dnsCacheExpiration
3600
network.http.max-connections
48
network.http.max-connections-per-server
24
network.http.max-persistent-connections-per-proxy
16
network.http.max-persistent-connections-per-server
8
network.http.pipelining
true
network.http.pipelining.maxrequests
8
network.http.pipelining.ssl
true
network.http.proxy.pipelining
true
network.prefetch-next
false
places.history.expiration.transient_current_max_pages
104858
plugins.hide_infobar_for_outdated_plugin
true
privacy.donottrackheader.enabled
true
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce GT 220
Vendor ID
0x10de
Device ID
0x0a20
Adapter RAM
1024
Adapter Drivers
nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version
9.18.13.623
Driver Date
8-30-2012
Adapter Description (GPU #2)
ATI Radeon HD 3400 Series
Vendor ID (GPU #2)
0x1002
Device ID (GPU #2)
0x95c5
Adapter RAM (GPU #2)
256
Adapter Drivers (GPU #2)
aticfx64 aticfx64 aticfx32 aticfx32 atiumd64 atidxx64 atiumdag atidxx32 atiumdva atiumd6a atitmm64
Driver Version (GPU #2)
8.930.0.0
Driver Date (GPU #2)
12-5-2011
Direct2D Enabled
false
DirectWrite Enabled
false (6.1.7601.17789)
ClearType Parameters
ClearType parameters not found
WebGL Renderer
Google Inc. -- ANGLE (NVIDIA GeForce GT 220 ) -- OpenGL ES 2.0 (ANGLE 1.0.0.1041)
GPU Accelerated Windows
0
JavaScript
Incremental GC
0
Library Versions
Expected minimum version
Version in use
NSPR
4.9.1
4.9.1
NSS
3.13.6.0 Basic ECC
3.13.6.0 Basic ECC
NSS Util
3.13.6.0
3.13.6.0
NSS SSL
3.13.6.0 Basic ECC
3.13.6.0 Basic ECC
NSS S/MIME
3.13.6.0 Basic ECC
3.13.6.0 Basic ECC
Shockwave Flash
File: NPSWF32_11_4_402_278.dll
Version: 11.4.402.278
Shockwave Flash 11.4 r402
application/x-shockwave-flash
Adobe Flash movie
swf
application/futuresplash
FutureSplash movie
spl
Silverlight Plug-In
File: npctrl.dll
Version: 5.1.10411.0
5.1.10411.0
application/x-silverlight
npctrl
scr
application/x-silverlight-2 -
Solution for all your login problems !
Hi everyone,
Due to the problem of designing a Login solution experienced in this forum...i have a solution that takes care of this problem i will like us all share this and pls give me a feed back as to how it works for you or its efficiency.
This solution has three parts.
(a) The Bean
(b) The HTML Page
(c) The JSP Page
XXXXXXXXXXXXXXXXXXX The Bean XXXXXXXXXXXXXXXXXXXXX
// dsn name is test_register
// table name is registrationDetails
// package bsoft;
import java.sql.*;
public class LoginExample {
private String username = "";
private String password = "";
public LoginExample() {
public void setUsername(String username) {
this.username = username;
public void setPassword(String password) {
this.password = password;
public boolean authenticate(String username2, String password2) {
String query="select * from RegistrationDetails";
String DbsUserName="";
String DbsPassword="";
String finalUser="";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con=DriverManager.getConnection("jdbc:odbc:test_register", "dataDB_uname", "dataDB_pass");
Statement stat=con.createStatement();
ResultSet rst=stat.executeQuery(query);
while(rst.next())
DbsUserName=rst.getString("UserName");
DbsPassword=rst.getString("password");
if (username2.equals(DbUserName) && password2.equals(DbPassword)) {
break;
return true;
}catch(Exception e){
e.printStackTrace();
return false;
XXXXXXXXXXXXXXXXXXX The HTML LOGIN PAGE XXXXXXXXXXXXXXXXXXX
<html>
<head>
<title> Olumide Bolusoft </title>
</head>
<body>
<br>
<p> <h3><center>Please enter your user name and password to login to Bolusoft Inc </center></h3></p>
<br>
<br>
<form action="processLogin.jsp " method = "post� >
<center>username</center>
<center><input type = "text" name= "username"></center>
<center>password</center>
<center><input type = "password" name = "password"></center>
<center><input type="submit" name="Submit" value="Login"></center>
</form>
</body>
</html>
XXXXXXXXXXXXXXXXXX The JSP PAGE XXXXXXXXXXXXXXXXXX
<%@ page import="java.util.*" %>
<jsp:useBean id="bsoftLogin" class="bsoft.LoginExample"/>
<%
String username = request.getParameter("username");
String password = request.getParameter("password");
if(bsoftLogin.authenticate(username, password) ) {
%>
<jsp:forward page="success.jsp"/>
<%
} else {
%>
<jsp:forward page="errorRetry.jsp"/>
<%
%>
N.B name this file as processLogin.jsp
XXXXXXXXXXXXXXX The End XXXXXXXXXXXXXXXXXXXXXXXXX
I hope this helps majority of us who are having problems with implementing a login solution.
Also note that u can connect to any db of ur choice..the query syntax and connection parameters now depends on that supported by your DB.
Thanks All
Olumide BHello
I think u have used Model 1 Architecture.
It would be great if u follow the MVC Architecture.
What about this??
Login.html -> User login Page.
Login Servlet -> Handles Request from Login.html
LoginBean -> Uses to validate the user.
Success.jsp/Retry.jsp -> The Final page that will be displayed.
Am also new to Java Server Side programming.
Suggestions are always welcome.
Sathish -
Solution for some iPod/iTunes problems...
If you are having one or more of the following problems, Windows may be confusing iPod with a network drive or hard drive and may exhibit strange behavior, like:
-iPod does not show up in iTunes or as disk in Windows Explorer
-iPod does not show up as disk in Windows Explorer (even though disk mode in enabled ont he iPod).
-iTunes and Windows Explorer report the wrong amount of available space on the iPod.
-No songs appear on the iPod after an apprently successful update from iTunes.
-Music copied to mapped network drive instead of iPod.
-The iPod setup assistant appears in iTunes everytime the iPod is connected.
-iTunes displays the "iTunes has detected an iPod in recovery mode- use iTunes to restore" message even after the iPod has been restored.
-The wrong iPod name displays in the iTunes source list.
Please note*changing the iPod drive letter may not affect what letter theiPod uses on subsequent connections, so its not the best long-term solution unless you want to change this everytime you have issues.
To change the drive letter:
-Open Control Panel in Windows
-Go to Administrative Tools
-Go to Computer Management
-Go to Disk Management
-Locate theiPod and right click on it, then click Change drive letter and paths.
-Use the drop-down box to select a new drive letter. Make sure to use a drive letter that is not already assigned to a network drive. The drop-down menu will display all letters that are not assigned to a physical drive, but network drives will stil be listed so be careful. If you arent sure, add a new drive and pick your own letter, something way down the list is best since common drives are A, B, C, D, etc.
-click OK
-Click yes on the confirmation box
-Restart computer
Good luck!!! It worked for me!!!Honestly, I don't know!! I searched ITunes and IE7 and saw that others were having the same problem I was and that if they stopped using IE7 Itunes started working again.
Basically, I was just proud of dumping Internet Explorer! See, I really love Macs. I had an ibook that finally conked out and i couldn't afford another mac. -
My solution for cannot turn page problem in ADE
It seems this problem has been there for a while. I have this problem in ADE 2.0 and 3.0. I solve this problem on my computer today.
This problem is not a "turnning page" problem but an UI refresh problem, if you turn page, close ADE and reopen it, you will find the page actually turnned, I guess this problem occurs on a computer which have two display card. On my laptop, a NVIDIA, and an integrated. ADE works fine on NVIDIA and not on the integrated one.
So Here is my solution: Tell ADE not running on the integrated display card but on NVIDIA. You can do so by using NVIDIA's control panel program. "manage 3D settings" -> "program setting" tab, add ADE, and tell it running on NVIDIA.System: Windows 7; graphics (onboard Motherboard) Intel(R) HD Graphics 4600 Properties.
I have the same problem:
ADE does not turn page *unless* I resize the ADE window after turning the page. After resizing the ADE window, the page will turn.
I don't have multiple displays. I don't know how to adjust my display setting to facilitate ADE. Still looking for a solution... If you find a solution or a better product, let us know. -
Temporary Solution for endless connecting mail problem.
I've never really had problems connecting to my Gmail IMAP account. Just my 3 POP accounts. I found the setting on Gmail to check my three other POP accounts and put the messages in my Gmail IMAP inbox. Leave a copy of the original message on the server(s). No forwarding necessary.
I now use the iPhone to check only one account (Gmail), get all my mail from the other 3 accounts and am able to reply as if from the POP address. It's much quicker only checking one account, and this temp solution I may keep using even after a software/firmware upgrade.
Original messages left on the server(s) are available for download to my iMac when I get home from the road.
Hope this might be of some help.
CD3Follow up to original post.
Your POP accounts will show up in Gmail IMAP and you can check each account manually, if you wish, thru Gmail and not have to connect to the POP servers. -
I found a solution for the You Tube problem
For all of you that have had problem seen you tube videos with your Mac Book, finally the problem was solved. Yesterday March 22 Adobe updated its Flash Player. I updated it and the problem was solved.
You should also have the last update Mac OS 10.6.7 and last update of Adobe Reader 9.4.3
Maybe you are looking for
-
no apps no nothing everything is gone, how do i get it all back?
-
Photoshop crashes when I try to use photomail
photoshop crashes when I try to use photomail
-
Inconsistent Results Rows in Bex Analyzer-7.0
Hello Forum We are using a 3.x query in Bex-7.0 analyzer wherein the result rows are suppressed but the user can see the result by removing the suppress option at query result. As per query design the column contains calendar week along with the key
-
Some metadata not or differently exported
Just discovered to my disappointment that when an image is exported LR takes away a lot of meta date. I use Nikon D80 and lots of specific Nikon meta data disappear. Gone from the EXIF fields are also white point setting, compression type and Pixel X
-
Hi everyone... Today I've just started to work on a project that had several developers before me. Everytime a lib file (jar) used on the project was updated, they usually just copy/paste it and added the new jar to the class path. Now the classpath