[SOLVED] stucked in GDM

Hello,
I forgot to create more users besides the admin, and I set GDM as default login, now when I start Arch, it takes me directly to gdm and because I only have one "user" I can't login, so I'm stuck in gdm.
How can I go back to the old login screen? (tried alt+f# but of course that didn't work)
EDIT: I just noticed this "The inittab method is recommended for various reasons, one being that it will allow you to boot directly into framebuffer mode from GRUB. This is an advantage should the graphics driver crash in X, for example, you would not be forced to fix your system from a live cd or through other needlessly complex means."
That probably means I will have to "be forced to fix my system from a live cd or through other needlessly complex means"
Last edited by Milton (2009-06-19 22:17:38)

At the boot prompt hit 'e', append 3 to the kernel line ie
kernel /vmlinuz26 root=/dev/disk/by-uuid/4b72099b-4334-46b2-801a-6a308604d543 ro 3
Once done hit 'b' to boot, and go from there.

Similar Messages

Stuck at gdm how do i drop back into the console?

okay first off i'm ashamed to get stuck at this spot after spending a long time figuring out how to install/configure anything. long story short i got my system core installed, installed fluxbox, and then installed gdm. unfortunately now gdm loads and wont let me back into the console(even if i try the command ctrl+alt+backspace). why is that bad? because i forgot to add a normal user and gdm wont allow me to login with root.
my question: how do i drop back to the console?

If you are satisfied, you should change the topic to "[SOLVED] stuck at gdm how do i drop back into the console?" so the rest of us know you are happy :-)

[SOLVED] Stuck in emergency mode after migration to systemd

Hey there,
in order to get gnome 3.6 running i wanted to migrate my system to systemd.
I followed the instructions in the wiki but now i'm stuck at an emergency console.
The log tells me this:
http://pl.vg/4eeoy
I've got an LVM encrypted setup.
Maybe you can help me get my system back running.
Regards,
Marcel
Last edited by jack_slayton (2012-10-31 17:37:00)

Hmm, i solved it by commenting some UUID mounts of NTFS filesystems in my /etc/fstab.
Strange ...

[SOLVED] Stuck in fresh install: problems after succesfull glibc upgra

Hello everyone. I am stuck in the installation after upgrading glibc.
I am installing from the Core Image ISO.
As it says in the Developer Wiki the first thing I did after installing the system is:
$ pacman -U http://pkgbuild.com/~allan/glibc-2.16.0 … pkg.tar.xz
In that moment appaered some errors related to tzselect and 2 other files which I dont remember but I deleted them and then it let me install.
By doing that it let me upgrade pacman, so I upgraded pacman and created de signature database as it should be.
Then I did a 'pacman -S filesystem --force' and 'rm /etc/profile.d/locale.sh' to solve future known errors related to system upgrade and rebooted.
In that moment everything was OK, but then I tried 'pacman -Syu'
Here's where I am stuck. Pacman says that /lib still exists on the filesystem.
As it says on the developer wiki i tried 'find /lib -exec pacman -Qo -- {} +' to find out which packages where owing /lib and the list it displayed was HUGE, really...
I removed the /lib/modules/3.0-ARCH since no other files where in that folder and tried again 'pacman -Syu' but keep getting the '/lib exists on filesystem' error.
What should I do to solve this??
The list of files in /lib is this:
device-mapper libcap.so.2 libext2fs.so.2.4 libmount.so.1.1.0 libpam_misc.so libshadow.so
firmware libcap.so.2.22 libgcrypt.so libm.so.6 libpam_misc.so.0 libshadow.so.0
initcpio libcidn-2.16.so libgcrypt.so.11 libncursesw.so.5 libpam_misc.so.0.82.0 libshadow.so.0.0.0
ld-2.16.so libcidn.so.1 libgcrypt.so.11.7.0 libncursesw.so.5.9 libpam.so libss.so.2
ld-linux-x86-64.so.2 libcom_err.so.2 libgpg-error.so libnsl-2.16.so libpam.so.0 libss.so.2.0
libacl.so libcom_err.so.2.1 libgpg-error.so.0 libnsl.so.1 libpam.so.0.83.1 libsysfs.so.2
libacl.so.1 libcrypt-2.16.so libgpg-error.so.0.8.0 libnss_compat-2.16.so libpcprofile.so libsysfs.so.2.0.1
libacl.so.1.1.0 libcryptsetup.so libgudev-1.0.so.0 libnss_compat.so.2 libpcre.so.0 libthread_db-1.0.so
libanl-2.16.so libcryptsetup.so.1 libgudev-1.0.so.0.1.0 libnss_db-2.16.so libpcre.so.0.0.1 libthread_db.so.1
libanl.so.1 libcryptsetup.so.1.2.0 libhandle.a libnss_db.so.2 libpopt.so libudev.so.0
libattr.so libcrypt.so.1 libhandle.so libnss_dns-2.16.so libpopt.so.0 libudev.so.0.12.0
libattr.so.1 libc.so.6 libhandle.so.1 libnss_dns.so.2 libpopt.so.0.0.0 libutil-2.16.so
libattr.so.1.1.0 libdevmapper-event-lvm2mirror.so libhandle.so.1.0.3 libnss_files-2.16.so libproc-3.2.8.so libutil.so.1
libblkid.so.1 libdevmapper-event-lvm2raid.so libhistory.so libnss_files.so.2 libpthread-2.16.so libuuid.so.1
libblkid.so.1.1.0 libdevmapper-event-lvm2snapshot.so libhistory.so.6 libnss_hesiod-2.16.so libpthread.so.0 libuuid.so.1.3.0
libBrokenLocale-2.16.so libdevmapper-event-lvm2.so.2.02 libhistory.so.6.2 libnss_hesiod.so.2 libreadline.so modprobe.d
libBrokenLocale.so.1 libdevmapper-event.so.1.02 libkeyutils.so.1 libnss_nis-2.16.so libreadline.so.6 modules
libbz2.so libdevmapper.so.1.02 libkeyutils.so.1.4 libnss_nisplus-2.16.so libreadline.so.6.2 security
libbz2.so.1 libdl-2.16.so liblvm2app.so.2.2 libnss_nisplus.so.2 libresolv-2.16.so systemd
libbz2.so.1.0 libdl.so.2 liblvm2cmd.so.2.02 libnss_nis.so.2 libresolv.so.2 udev
libbz2.so.1.0.6 libe2p.so.2 libm-2.16.so libpamc.so librt-2.16.so
libc-2.16.so libe2p.so.2.3 libmemusage.so libpamc.so.0 librt.so.1
libcap.so libext2fs.so.2 libmount.so.1 libpamc.so.0.82.1 libSegFault.so
Thanks everyone who will answer this post.
Last edited by grego1422 (2012-07-16 19:35:16)

It seems that deleting the folder inside /lib/modules broke something since the system was quite unstable after rebooting...
Whatever, I'm sorry I can't continue to solve my last situation.
I have just made a new install and followed the instructions at Allan McRae's blog.
pacman -Sy
rm -rf /var/run /var/lock && pacman -Sf filesystem
pacman -S tzdata
pacman -U http://pkgbuild.com/~allan/glibc-2.16.0 … pkg.tar.xz
rm /etc/profile.d/locale.sh
pacman -Su --ignore glibc
pacman -Su
I'm quite near the success, now I'm stuck at generating the signature database.
Before the last 'pacman -Su' I'm forced to create the trusted signature database by pacman, when I run 'pacman-key --init' it seems to hang, I left it there generating the database for about half an hour in my first atempt and about an hour in my second atempt and it never finished. But in my previous installation (2 hours ago) it was done in 5 minutes.
Is there another way to generate the signature database? or anyone knows what is happening? Thank you.
Last edited by grego1422 (2012-07-16 16:27:55)

[SOLVED (SORT OF)] GDM + Cinnamon + multiple monitors

Has anyone tried the above combination? At work I have two monitors hooked up to my laptop so I effectively have three screens - when I was using Mint I had no issues arranging the displays via the display section of cinnamon-settings (I have the two large monitors side by side and the laptop underneath). The default layout has placed the laptop to the left of the two monitors and I've no ability to move the laptop at all - it stays 'stuck' in place. Is this a limitation of using Cinnamon under gdm?
Last edited by analbeard (2014-11-27 09:28:41)

Just in case this is of any use to anyone, I was unable to use the control panel to align the monitors as I wanted so I resorted to setting the x/y coordinates via ~/.config/monitors.xml - it doesn't explain why the control panel doesn't work, but at least I have the layout as I want now.

[SOLVED] Gnome and gdm is not themed after reinstall

Hi all.
I messed up my Arch install yesterday, so today I reinstalled my system. I normally use Gnome, so I installed everything I normally install. (only things not installed from group gnome is epiphany and gnome-termial, as I use lxterminal instead)
But as I reboot into GDM I find myself surprised: normally GDM will display the green leaf background on me, and after I log in this will be the desktop background. However, this is not the case now. GDM presents a plain black background, and what's more, when I try to change the background in gnome-appearance-preferences, the background image does not change! The only changes I get are the background colors belonging to each background. What has happened since the last time I installed??
Thank you for any help
EDIT: Seems a missing HAL was the problem. Even though GDM no longer depends on HAL, installing HAL and adding it to DAEMONS in rc.conf solved everything for me.
Last edited by mariusmeyer (2010-11-09 06:05:29)

Problem solved. I took gdm out of rc.conf, and uncommented it in in /etc/inittab. Then reinstalled glib2. After that it worked like a charm. Some warning message about wicd not starting D-Bus something, but I can deal with that later. Now typing in Chromium instead of elinks. Mission accomplished. Thanks community!

[SOLVED] After upgrade gdm and Gnome don't work.

Hi,
after I did an upgrade I had some ldconfig: errors and fixed them all using pkgfile and reinstallation of quite some packages.
But now starting gdm with
# systemctl start gdm
only leads to a black screen with a cross shaped cursor I can move. Nothing more.
Xorg works -- I'm writing this post from KDE.
I reinstalled gnome and gnome-extra. Still no success.
System is up to date.
Hopefully my logs will help, I have no idea what to do. Thanks for any help. :)
/var/log/Xorg.0.log
[ 384.588]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 384.588] X Protocol Version 11, Revision 0
[ 384.588] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 384.588] Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 384.588] Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 384.588] Build Date: 17 April 2013 02:37:06PM
[ 384.588]
[ 384.588] Current version of pixman: 0.30.0
[ 384.588] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 384.588] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 384.589] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
[ 384.589] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 384.589] (==) No Layout section. Using the first Screen section.
[ 384.589] (==) No screen section available. Using defaults.
[ 384.589] (**) |-->Screen "Default Screen Section" (0)
[ 384.589] (**) | |-->Monitor "<default monitor>"
[ 384.590] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 384.590] (**) | |-->Device "Intel Graphics"
[ 384.590] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 384.590] (==) Automatically adding devices
[ 384.590] (==) Automatically enabling devices
[ 384.590] (==) Automatically adding GPU devices
[ 384.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 384.590] Entry deleted from font path.
[ 384.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 384.590] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
[ 384.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 384.590] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 384.590] (II) Loader magic: 0x7fcc20
[ 384.590] (II) Module ABI versions:
[ 384.590] X.Org ANSI C Emulation: 0.4
[ 384.590] X.Org Video Driver: 14.1
[ 384.590] X.Org XInput driver : 19.1
[ 384.590] X.Org Server Extension : 7.0
[ 384.591] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 384.594] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 384.594] Initializing built-in extension Generic Event Extension
[ 384.594] Initializing built-in extension SHAPE
[ 384.594] Initializing built-in extension MIT-SHM
[ 384.594] Initializing built-in extension XInputExtension
[ 384.594] Initializing built-in extension XTEST
[ 384.594] Initializing built-in extension BIG-REQUESTS
[ 384.594] Initializing built-in extension SYNC
[ 384.594] Initializing built-in extension XKEYBOARD
[ 384.594] Initializing built-in extension XC-MISC
[ 384.594] Initializing built-in extension SECURITY
[ 384.594] Initializing built-in extension XINERAMA
[ 384.594] Initializing built-in extension XFIXES
[ 384.594] Initializing built-in extension RENDER
[ 384.594] Initializing built-in extension RANDR
[ 384.594] Initializing built-in extension COMPOSITE
[ 384.594] Initializing built-in extension DAMAGE
[ 384.594] Initializing built-in extension MIT-SCREEN-SAVER
[ 384.594] Initializing built-in extension DOUBLE-BUFFER
[ 384.594] Initializing built-in extension RECORD
[ 384.595] Initializing built-in extension DPMS
[ 384.595] Initializing built-in extension X-Resource
[ 384.595] Initializing built-in extension XVideo
[ 384.595] Initializing built-in extension XVideo-MotionCompensation
[ 384.595] Initializing built-in extension XFree86-VidModeExtension
[ 384.595] Initializing built-in extension XFree86-DGA
[ 384.595] Initializing built-in extension XFree86-DRI
[ 384.595] Initializing built-in extension DRI2
[ 384.595] (II) LoadModule: "glx"
[ 384.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 384.595] (II) Module glx: vendor="X.Org Foundation"
[ 384.595] compiled for 1.14.1, module version = 1.0.0
[ 384.595] ABI class: X.Org Server Extension, version 7.0
[ 384.595] (==) AIGLX enabled
[ 384.596] Loading extension GLX
[ 384.596] (II) LoadModule: "intel"
[ 384.596] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 384.596] (II) Module intel: vendor="X.Org Foundation"
[ 384.596] compiled for 1.14.1, module version = 2.21.9
[ 384.596] Module class: X.Org Video Driver
[ 384.596] ABI class: X.Org Video Driver, version 14.1
[ 384.596] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 384.597] (++) using VT number 1
[ 384.602] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 384.602] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 384.602] (==) intel(0): RGB weight 888
[ 384.602] (==) intel(0): Default visual is TrueColor
[ 384.602] (**) intel(0): Option "AccelMethod" "sna"
[ 384.603] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 384.603] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 384.603] (**) intel(0): Framebuffer tiled
[ 384.603] (**) intel(0): Pixmaps tiled
[ 384.603] (**) intel(0): "Tear free" disabled
[ 384.603] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 384.604] (II) intel(0): Output eDP1 has no monitor section
[ 384.604] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 384.605] (II) intel(0): Output VGA1 has no monitor section
[ 384.605] (II) intel(0): Output HDMI1 has no monitor section
[ 384.605] (II) intel(0): Output DP1 has no monitor section
[ 384.606] (II) intel(0): EDID for output eDP1
[ 384.606] (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
[ 384.606] (II) intel(0): Year: 2011 Week: 0
[ 384.606] (II) intel(0): EDID Version: 1.4
[ 384.606] (II) intel(0): Digital Display Input
[ 384.606] (II) intel(0): 8 bits per channel
[ 384.606] (II) intel(0): Digital interface is DisplayPort
[ 384.606] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 384.606] (II) intel(0): Gamma: 2.20
[ 384.606] (II) intel(0): No DPMS capabilities specified
[ 384.606] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 384.606] (II) intel(0): First detailed timing is preferred mode
[ 384.606] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 384.606] (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
[ 384.606] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 384.606] (II) intel(0): Manufacturer's mask: 0
[ 384.606] (II) intel(0): Supported detailed timing:
[ 384.606] (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
[ 384.606] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
[ 384.606] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
[ 384.606] (II) intel(0): Unknown vendor-specific block f
[ 384.606] (II) intel(0): SAMSUNG
[ 384.606] (II) intel(0): LSN133KL018
[ 384.606] (II) intel(0): EDID (in hex):
[ 384.606] (II) intel(0): 00ffffffffffff004ca3463500000000
[ 384.606] (II) intel(0): 00150104a51d10780209e59757548a27
[ 384.606] (II) intel(0): 22505400000001010101010101010101
[ 384.606] (II) intel(0): 010101010101382740c0608420303020
[ 384.606] (II) intel(0): 250025a5100000190000000f00000000
[ 384.606] (II) intel(0): 000000000028800a1e00000000fe0053
[ 384.606] (II) intel(0): 414d53554e470a2020202020000000fe
[ 384.606] (II) intel(0): 004c534e3133334b4c3031380a200003
[ 384.606] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 384.606] (II) intel(0): Printing probed modes for output eDP1
[ 384.606] (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 384.606] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 384.606] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 384.606] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 384.606] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 384.608] (II) intel(0): EDID for output VGA1
[ 384.608] (II) intel(0): EDID for output HDMI1
[ 384.608] (II) intel(0): EDID for output DP1
[ 384.608] (II) intel(0): Output eDP1 connected
[ 384.608] (II) intel(0): Output VGA1 disconnected
[ 384.608] (II) intel(0): Output HDMI1 disconnected
[ 384.608] (II) intel(0): Output DP1 disconnected
[ 384.608] (II) intel(0): Using exact sizes for initial modes
[ 384.608] (II) intel(0): Output eDP1 using initial mode 1600x900
[ 384.608] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 384.608] (==) intel(0): DPI set to (96, 96)
[ 384.608] (II) Loading sub module "dri2"
[ 384.608] (II) LoadModule: "dri2"
[ 384.608] (II) Module "dri2" already built-in
[ 384.608] (==) Depth 24 pixmap format is 32 bpp
[ 384.608] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 384.608] (==) intel(0): Backing store disabled
[ 384.608] (==) intel(0): Silken mouse enabled
[ 384.608] (II) intel(0): HW Cursor enabled
[ 384.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 386.414] (==) intel(0): DPMS enabled
[ 386.414] (II) intel(0): [DRI2] Setup complete
[ 386.414] (II) intel(0): [DRI2] DRI driver: i965
[ 386.414] (II) intel(0): direct rendering: DRI2 Enabled
[ 386.414] (==) intel(0): hotplug detection: "enabled"
[ 386.415] (--) RandR disabled
[ 386.430] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 386.430] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 386.430] (II) AIGLX: enabled GLX_ARB_create_context
[ 386.430] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 386.430] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 386.430] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 386.430] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 386.430] (II) AIGLX: Loaded and initialized i965
[ 386.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 386.430] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[ 386.446] (II) intel(0): Setting screen physical size to 423 x 238
[ 386.508] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 386.508] (**) Power Button: Applying InputClass "system-keyboard"
[ 386.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 386.508] (II) LoadModule: "evdev"
[ 386.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 386.509] (II) Module evdev: vendor="X.Org Foundation"
[ 386.509] compiled for 1.14.0, module version = 2.8.0
[ 386.509] Module class: X.Org XInput Driver
[ 386.509] ABI class: X.Org XInput driver, version 19.1
[ 386.509] (II) Using input driver 'evdev' for 'Power Button'
[ 386.509] (**) Power Button: always reports core events
[ 386.509] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 386.509] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 386.509] (--) evdev: Power Button: Found keys
[ 386.509] (II) evdev: Power Button: Configuring as keyboard
[ 386.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 386.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 386.510] (**) Option "xkb_rules" "evdev"
[ 386.510] (**) Option "xkb_model" "evdev"
[ 386.510] (**) Option "xkb_layout" "de"
[ 386.535] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 386.535] (**) Video Bus: Applying InputClass "system-keyboard"
[ 386.535] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 386.535] (II) Using input driver 'evdev' for 'Video Bus'
[ 386.535] (**) Video Bus: always reports core events
[ 386.535] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 386.535] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 386.535] (--) evdev: Video Bus: Found keys
[ 386.535] (II) evdev: Video Bus: Configuring as keyboard
[ 386.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event10"
[ 386.535] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 386.535] (**) Option "xkb_rules" "evdev"
[ 386.535] (**) Option "xkb_model" "evdev"
[ 386.535] (**) Option "xkb_layout" "de"
[ 386.536] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 386.536] (**) Power Button: Applying InputClass "system-keyboard"
[ 386.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 386.536] (II) Using input driver 'evdev' for 'Power Button'
[ 386.536] (**) Power Button: always reports core events
[ 386.536] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 386.536] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 386.536] (--) evdev: Power Button: Found keys
[ 386.536] (II) evdev: Power Button: Configuring as keyboard
[ 386.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 386.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 386.536] (**) Option "xkb_rules" "evdev"
[ 386.536] (**) Option "xkb_model" "evdev"
[ 386.536] (**) Option "xkb_layout" "de"
[ 386.536] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 386.536] (II) No input driver specified, ignoring this device.
[ 386.536] (II) This device may have been added with another device file.
[ 386.537] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 386.537] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 386.537] (II) No input driver specified, ignoring this device.
[ 386.537] (II) This device may have been added with another device file.
[ 386.538] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 386.538] (II) No input driver specified, ignoring this device.
[ 386.538] (II) This device may have been added with another device file.
[ 386.538] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 386.538] (II) No input driver specified, ignoring this device.
[ 386.538] (II) This device may have been added with another device file.
[ 386.539] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
[ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
[ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
[ 386.539] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
[ 386.539] (**) Webcam SC-13HDL11624N: always reports core events
[ 386.539] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
[ 386.539] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
[ 386.539] (--) evdev: Webcam SC-13HDL11624N: Found keys
[ 386.539] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
[ 386.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
[ 386.539] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
[ 386.539] (**) Option "xkb_rules" "evdev"
[ 386.539] (**) Option "xkb_model" "evdev"
[ 386.539] (**) Option "xkb_layout" "de"
[ 386.540] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 386.540] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 386.541] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 386.541] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 386.541] (**) AT Translated Set 2 keyboard: always reports core events
[ 386.541] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 386.541] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 386.541] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 386.541] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 386.541] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 386.541] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 386.541] (**) Option "xkb_rules" "evdev"
[ 386.541] (**) Option "xkb_model" "evdev"
[ 386.541] (**) Option "xkb_layout" "de"
[ 386.542] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
[ 386.542] (II) LoadModule: "synaptics"
[ 386.542] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 386.543] (II) Module synaptics: vendor="X.Org Foundation"
[ 386.543] compiled for 1.14.1, module version = 1.7.1
[ 386.543] Module class: X.Org XInput Driver
[ 386.543] ABI class: X.Org XInput driver, version 19.1
[ 386.543] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 386.543] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 386.543] (**) Option "Device" "/dev/input/event9"
[ 386.563] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
[ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 386.564] (**) Option "TapButton1" "1"
[ 386.564] (**) Option "TapButton2" "2"
[ 386.564] (**) Option "TapButton3" "3"
[ 386.564] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 386.564] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 386.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 386.570] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
[ 386.570] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 386.571] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 386.572] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 386.572] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 386.573] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 386.573] (II) No input driver specified, ignoring this device.
[ 386.573] (II) This device may have been added with another device file.
[ 386.899] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 386.899] (II) intel(0): Printing DDC gathered Modelines:
[ 386.899] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 387.041] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 387.041] (II) intel(0): Printing DDC gathered Modelines:
[ 387.041] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 387.069] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 387.069] (II) intel(0): Printing DDC gathered Modelines:
[ 387.069] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 389.740] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 391.348] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 391.348] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[ 391.367] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 391.367] (II) intel(0): Printing DDC gathered Modelines:
[ 391.367] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 391.369] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 397.614] (II) AIGLX: Suspending AIGLX clients for VT switch
and
/var/log/gdm/:0.log
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Intel Graphics"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) config/udev: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.0.0
(==) AIGLX enabled
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 2.21.9
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
(++) using VT number 1
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
(--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): "Tear free" disabled
(**) intel(0): Forcing per-crtc-pixmaps? no
(II) intel(0): Output eDP1 has no monitor section
(--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output eDP1
(II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
(II) intel(0): Year: 2011 Week: 0
(II) intel(0): EDID Version: 1.4
(II) intel(0): Digital Display Input
(II) intel(0): 8 bits per channel
(II) intel(0): Digital interface is DisplayPort
(II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): Preferred mode is native pixel format and refresh rate
(II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
(II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
(II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): SAMSUNG
(II) intel(0): LSN133KL018
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3463500000000
(II) intel(0): 00150104a51d10780209e59757548a27
(II) intel(0): 22505400000001010101010101010101
(II) intel(0): 010101010101382740c0608420303020
(II) intel(0): 250025a5100000190000000f00000000
(II) intel(0): 000000000028800a1e00000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c534e3133334b4c3031380a200003
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output eDP1
(II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output eDP1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output eDP1 using initial mode 1600x900
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): HW Cursor enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2] DRI driver: i965
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_ARB_create_context
(II) AIGLX: enabled GLX_ARB_create_context_profile
(II) AIGLX: enabled GLX_EXT_create_context_es2_profile
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i965
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): Setting screen physical size to 423 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.14.0, module version = 2.8.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event4"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/udev: Adding input device Video Bus (/dev/input/event10)
(**) Video Bus: Applying InputClass "system-keyboard"
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event10"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
(**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
(**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
(**) Webcam SC-13HDL11624N: always reports core events
(**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
(--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
(--) evdev: Webcam SC-13HDL11624N: Found keys
(II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
(II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.7.1
(II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
(--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
(--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
(--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
(--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
(--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by Duxon (2013-06-15 16:17:35)

Finally managed fixed it.
libcanberra-pulse from [extra] was broken. I reinstalled it with --force.
Likely that came with the recent pulseaudio upgrade.

[SOLVED] Problem with GDM and Gnome3

Okay, the Topic was more of a trick. Actually I'm havingt two seperate issues; I googled and such, but have not found anything that really answers my question.
First Issue:
I have my gdm.service enabled, so it starts on statup. I boot into runlevel 3. Now, whenever I type "startx" the screen becomes black, and after a while I come back into my TTY with something along the lines of "Stopping X server". But without any error, etc. It justs stops. When I know do a systemctl status on my gdm.service, I become that:
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: inactive (dead)
Feb 03 16:47:31 thunderlaptop gdm-simple-slave[475]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Feb 03 16:48:22 thunderlaptop gdm-password][623]: pam_unix(gdm-password:auth): authentication failure; logname=(unknown) uid=0 euid=0 tty=:0 ruser= rhost= user=thunderuser
Feb 03 16:48:33 thunderlaptop gdm-password][626]: pam_unix(gdm-password:session): session opened for user thunderuser by (unknown)(uid=0)
Feb 03 16:48:33 thunderlaptop gdm-simple-slave[475]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Feb 03 17:03:17 thunderlaptop systemd[1]: Stopping GNOME Display Manager...
Feb 03 17:03:17 thunderlaptop gdm-simple-slave[475]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Feb 03 17:03:17 thunderlaptop gdm-simple-slave[475]: WARNING: Child process 626 was already dead.
Feb 03 17:03:17 thunderlaptop gdm-simple-slave[475]: WARNING: Unable to kill session worker process
Feb 03 17:03:18 thunderlaptop gdm-simple-slave[475]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Feb 03 17:03:18 thunderlaptop systemd[1]: Stopped GNOME Display Manager.
After I start it, it puts me into the login screen and I can work just fine with Gnome3. I have no clue where the issuse might be.
The second is simple to explain - I have no Network symbol in the upper right corner, and Gnome3 says the network service is not compatible with my system.
Oh, and another issue. When I type something too long, the text does not start a new line in my console resulting in some Visual problems.
Thanks in advance.
Last edited by ThunderRush (2013-02-04 12:36:57)

Blasphemist wrote:
Isn't GDM starting X and Gnome as it should for you? You shouldn't need to start X unless you want more than one X session. Is that what you are trying to do? After installing Gnome and Gnome-extra, I just use this command to enable GDM. systemctl enable gdm
What is your networking configuration. The beginners guide has been updated within the last week or two about this due to a change in network interface naming. Please give that a look.
Which console and shell are you using? Does it have a line wrap configuration option. This is normally automatic but those are my first questions.
Well, as I said, I start into runlevel 3 and want to start X by myself.
Yes, I realise that it is not wlan0 anymore, and I know the name of my wlan-interface. It works awesomely fine via wifi-menu <interface>, but gnome3 seems to have struggles? Have not found anything about that.
I'm using the gnome shell with bash. But the problem occours in a tty2 console as well. I guess it is a problem with .bashrc, but I have no idea what it might be.
Edit:
So, the fixes for the problems are...
1. Reinstall Linux. My Pam was fucked up somewhoe.
2. systemctl enable NetworkManager and not networkmanager. Please kill me.
3. I wrote the Colorcodes and escape-characters in a variable and used that in the actual PS1. That fixed it, and the guys over at bash suggest that too.
Last edited by ThunderRush (2013-02-04 12:36:42)

[SOLVED] - [Gnome 3] GDM error dialog "failed to start session GNOME"

Hi,
Just installed Gnome 3 from testing.
First boot crashed, but that was a missing library for splashy, so removed splash from my grub boot line.
Now the system boots to GDM. I can start my Xfce session without any issues, but if I select Gnome, I get a dialog "Failed to start session GNOME".
Following is my GDM greeter log:
gnome-session[2208]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "/usr/lib/at-spi/at-spi-registryd" (No such file or directory)
(gnome-settings-daemon:2215): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
** (process:2228): DEBUG: Greeter session pid=2228 display=:0 xauthority=/var/run/gdm/auth-for-gdm-RuDxNi/database
gnome-settings-daemon: xcb_io.c:140: dequeue_pending_request: Assertion `req == dpy->xcb->pending_requests' failed.
Failed to play sound: File or data not found
gnome-session[2208]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
(polkit-gnome-authentication-agent-1:2229): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
(gnome-power-manager:2226): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
(gnome-settings-daemon:2234): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
gdm-simple-greeter[2228]: Gtk-WARNING: gtkwidget.c:6778: widget not within a GtkWindow
gdm-simple-greeter[2228]: WARNING: Unable to read from file /etc/arch-release
Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
gdm-simple-greeter[2228]: Gdk-WARNING: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
(gnome-settings-daemon:2234): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
All help greatly appreciated.
Cheers.
Last edited by Padfoot (2011-04-08 23:38:59)

I just remembered to do that.....
Think I have found my problem.
The Arch Wiki for Gnome 3 has the line for installing to a new system
# pacman -Syu testing/gnome
This installs gnome 3, but does not include gnome-shell or gnome-panel
Just installing them now. Will report back shortly.
Maybe the Wiki should be updated to reflect this, or the package testing/gnome updated to depend on gnome-shell and gnome-panel.
Cheers.

[SOLVED] GNOME 3: GDM session selection

Hi,
is the session list from gdm (gnome2) gone?
Now it doesn't seem possible to select the session (ie. kde, gnome, lxde...)
anyone?
Last edited by giowck (2011-07-26 13:11:36)

it is possible if more sessions are available. If only one is available then the selection list is hidden.

[SOLVED] stuck at Target Reached Graphical Interface @ Nvidia/Nouveau

i'm kind of new to linux and specifically to arch, so pls be gentle. i just did a fresh install, all went fine, but here's one thing i'm unable to sort out. i've been having a hard time for a couple of hours now getting the right driver and the necessary configurations for my nvidia card. i went through a number of threads, none provided too much help, so here it is. whenever i try to use the proprietary nvidia drivers, the boot process gets stuck at the
Target Reached Graphical User Interface
message. i decided to try nouveau then, so i remove the nvidia packages, delete xorg.conf, install the nouveau packages, create 20-nouveau.conf with the content of
Section "Device"
Identifier "Default nvidia Device"
Driver "nouveau"
EndSection
reboot, but it results in the same phenomenon. from this point on i have to delete 20-nouveau.conf to even get to the login screen. there's no nomodeset in the kernel options by the way.
only the open source vesa drivers seem to work so far. i'm clueless about this one.
(i'm using external monitor @ DVI for my notebook.)
pacman -Qs nouveau
local/lib32-nouveau-dri 9.2.2-1
Mesa drivers for Nouveau (32-bit)
local/nouveau-dri 9.2.2-1
Mesa drivers for Nouveau
local/xf86-video-nouveau 1.0.9-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1)
Last edited by wootsgoinon (2013-11-03 12:51:44)

ok, if someone reads this, here's what i figured: realised that i didn't need neither xorg.conf, nor 20-nouveau.conf in the first place in order either driver to be utilized by bumbleebee. if you did nvidia-xconfig or manually created xorg.conf and/or 20-nouveau.conf and encountered the same issue described above as a result, just remove it/them. one trivia about bumblebee - maximum gpu performance gained by the primus render bridge.

[SOLVED]Slim and gdm questions

Hi all,
I just installed slim cause I wanted to try something new and faster than gdm login manager for gnome, I have it working right now but with a few hiccups:
1- I login using slim, but after I am logged in the system if I lock the screen, the gdm login shows (instead of the slim one)
2- System bootup is a LOT slower, after I login the system stays with just the background for a few seconds, then loads the desktop.
So, here are my questions:
a) If I remove gdm will I have this same issues? maybe the increased boot time is because I have 2 login managers installed?
b) I disabled the gdm daemon from rc.conf (put a ! before it), should I remove it from there completely? because apparently it is still loading.
Also I dont know much about login managers so I wanted a little enlightenment in this matter.
regards and thanks in advance
Last edited by 655321 (2010-06-13 20:57:35)

BKLive
Here is the info:
slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path ./:/bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
#default_user simone
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
#current_theme default
current_theme archlinux-darch-white
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
~/.xinitrc:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
#exec xterm
setxkbmap -option terminate:ctrl_alt_bksp
exec ck-launch-session gnome-session
Regarding whats runs at bootup, I guess you want to see my daemons array in rc.conf, here it is:
DAEMONS=(syslog-ng dbus hal network netfs crond alsa @cups slim !gdm)
Notice gdm is disabled.
Also, would you advice to reinstall gdm? removing it didnt do anything for the problem im experiencing.
thanks for the help

[SOLVED]stucked while creating templaet

hi frs,
i need to create a templaet like this
employee number Fieldwork1 fieldwork2 fieldwork3
11111111111111 20 30 10
22222222222222 30 40 5
fieldwork1,fieldwork2,fieldwork3 are attribute7 shown in XML file below
how to make it.
help pls
Regards
Rajesh
Message was edited by:
Rajesh.mani
Message was edited by:
Rajesh.mani

Hi,
You have to write an user exit or BADI for the PO.
Regards,
Chaitanya

[SOLVED] Stuck in hibernate state following death of HD

Hi,
Yesterday I got very unlucky. I put my Arch system into hibernation (in RAM). Upon restart, I found out that my secondary hard drive (which does not contain the system, I only used it for storage) had died on me (at start it hisses, then has the typical loud "click of death") beyond repair (I tried the classical recipes in that case: mild shock, freezing, etc...) Anyway, that is not my biggest problem: now I cannot start my system. When I try to start in text mode (fallback), it insists to do some fsck on /dev/sdb1, but of course the drive does not exist anymore. How can I skip this step? Can I edit the /etc/fstab and remove the drive entry, without compromising the rest of the system?
Thanks for your suggestions.
Last edited by zebulon (2010-08-17 16:40:13)

karol wrote:If you boot into single mode (append 's' at the end of the grub kernel line) you should be able to skip the fsck. I'm not sure how effective editing the fstab will be but it shouldn't damage anything.
I had the same issue in single mode, because it said /etc/sdb1 was mounted and e2fsck failed. If I tried to skip the check, it did not go further. On the other hand, removing the /etc/fstab entry for /etc/sdb1 fixed the issue. Thanks.
Last edited by zebulon (2010-08-17 12:50:09)

[SOLVED] Stuck in MATE without terminal

Hi all!
I recently installed Arch on a computer of mine, and also installed the MATE desktop environment and SLiM display manager. My problem is that I now log into the display manager at start up, and without a terminal I cannot do anything - I cannot connect to the Internet, I cannot install new software, I cannot even open plain text files because there is apparently nothing in MATE that can handle them. When I log out of MATE, the display manager pops up; I do not know how to get back to the terminal, and I cannot find a terminal program anywhere in MATE.
What do you think I should do?
Last edited by ken6346 (2013-11-21 16:54:52)

karol wrote:https://wiki.archlinux.org/index.php/Mate#Applications
Do you have a menu you can open? I know nothing about MARE, but there should be a way to launch applications like MATE Terminal.
There are a few menus, yes, but the only applications in it are an image viewer, some administrative tools, and Firefox, which I installed myself. I think this is because I didn't install the extra tools for MATE before I did all of this.
jasonwryan wrote:Ctrl-Alt-F{2-6}
I tried doing this; I ended up with a blank screen. I remember this happening before I used the display manager when I tried to log out of MATE.

[SOLVED] stucked in GDM

Similar Messages

Maybe you are looking for