[SOLVED] Suspend, temp3 goes from 20C to 100C

EDIT No problems using linux-lts kernel. Maybe 3.8 kernel works too. Thanks!
Then fan is running 100%, noise is terrible and nothing that I know of but reboot helps. Sometimes I had this same problem on Ubuntu and all went normal if suspended again, so this should be solvable.
$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +52.0°C (crit = +105.0°C)
temp2: +29.7°C (crit = +108.0°C)
temp3: +20.0°C (crit = +110.0°C)
temp4: +49.0°C (crit = +256.0°C)
temp5: +55.0°C (crit = +108.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +56.0°C (high = +100.0°C, crit = +100.0°C)
after suspend
$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +53.0°C (crit = +105.0°C)
temp2: +29.8°C (crit = +108.0°C)
temp3: +100.0°C (crit = +110.0°C)
temp4: +57.0°C (crit = +256.0°C)
temp5: +54.0°C (crit = +108.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +55.0°C (high = +100.0°C, crit = +100.0°C)
Almost same problem here but not solved. https://bbs.archlinux.org/viewtopic.php?id=156681
Last edited by arghhlinux (2013-02-21 13:25:40)

the sad clown wrote:You should try to offer more information: What is your computer model and processor, journalctl log from the wakeup period. Also, make sure all your vents are clean and clear of dust.
Well of course I forgot all important information. I opened and cleaned everything half-year ago. Model is HP 550: celeron M 550 and intel X3100 gpu. .
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 22
model name : Intel(R) Celeron(R) CPU 550 @ 2.00GHz
stepping : 1
microcode : 0x33
cpu MHz : 1995.181
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm
bogomips : 3991.62
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
$ systemctl
pulseaudio[534]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.L
goa[608]: goa-daemon version 3.6.2 starting [main.c:112, main()]
$ dmesg
[[ 255.556929] ACPI: Preparing to enter system sleep state S3
[ 255.557031] PM: Saving platform NVS memory
[ 255.557188] Disabling non-boot CPUs ...
[ 255.557232] Extended CMOS year: 2000
[ 255.557232] ACPI: Low-level resume complete
[ 255.557232] PM: Restoring platform NVS memory
[ 255.557232] Extended CMOS year: 2000
[ 255.557232] CPU0: Thermal monitoring handled by SMI
[ 255.557232] ACPI: Waking up from system sleep state S3
[ 255.706778] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 255.720043] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[ 255.736674] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 255.750190] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 255.750255] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 255.750319] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 255.763376] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 255.776853] PM: noirq resume of devices complete after 96.749 msecs
[ 255.777029] PM: early resume of devices complete after 0.104 msecs
[ 255.777056] i915 0000:00:02.0: setting latency timer to 64
[ 255.780005] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 255.780096] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 255.782025] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 255.782055] usb usb3: root hub lost power or was reset
[ 255.782079] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 255.782146] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 255.782201] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 255.782231] usb usb4: root hub lost power or was reset
[ 255.782251] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 255.782280] usb usb5: root hub lost power or was reset
[ 255.782300] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 255.782329] usb usb6: root hub lost power or was reset
[ 255.782351] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 255.782369] pci 0000:00:1e.0: setting latency timer to 64
[ 255.782386] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 255.782404] ahci 0000:00:1f.2: setting latency timer to 64
[ 255.802391] ata2: port disabled--ignoring
[ 256.126694] ata5: SATA link down (SStatus 0 SControl 300)
[ 256.126721] ata4: SATA link down (SStatus 0 SControl 300)
[ 256.266684] usb 4-2: reset low-speed USB device number 2 using uhci_hcd
[ 256.547061] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered ou
t
[ 256.547063] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered ou
t
[ 256.593604] ata1.00: configured for MWDMA2
[ 257.380800] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: R
x/Tx
[ 257.380803] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 258.153366] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 258.657742] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) fil
tered out
[ 258.657744] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVER
LAY) filtered out
[ 258.657791] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succee
ded
[ 258.657847] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) rejected by
device (Stat=0x51 Err=0x04)
[ 258.659608] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) fil
tered out
[ 258.659611] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVER
LAY) filtered out
[ 258.659650] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succee
ded
[ 258.659702] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) rejected by
device (Stat=0x51 Err=0x04)
[ 258.659938] ata3.00: configured for UDMA/100
[ 258.683389] sd 2:0:0:0: [sda] Starting disk
[ 258.697514] PM: resume of devices complete after 2920.480 msecs
[ 258.697811] PM: Finishing wakeup.
[ 258.697813] Restarting tasks ... done.
[ 258.730008] video LNXVIDEO:00: Restoring backlight state
Last edited by arghhlinux (2013-02-21 09:48:03)

Similar Messages

[SOLVED] Help with going from dhcp to static ip

So right now I'm using dhcp on my arch box, but for personal reasons (file server, print server, etc...) I'd like to assign a static ip to the machine.
I've noticed that when I get a ip via dhcp, there are different broadcast ips, and frankly, I'm just getting confused. I was wondering if there was a way (probably) to setup a static ip from setting that are retrieved via dhcp.
I know that there's a wiki page as to how to set up a static ip, but there are still some things that I don't understand, so I'd like to know what information I'd need to get from dhcp in order to set up a static ip (essentially the same ip, but it would remain the same)
I will blatantly admit that networking is not one of my strong suites...
Last edited by ZeroTruths (2009-09-03 01:20:29)

When you have a dhcp address, use ifconfig to identify the address, broadcast address, and subnet mask, and use route to identify your default gateway. All these should be added to the rc.conf NETWORKING section - an example is provided. Make a note of the nameserver address that was automatically added to /etc/resolv.conf under dhcp - it should remain there.
Before you do all that, you may have the option of using a dhcp fixed lease instead i.e. continue to use dhcp, but configure it to provide the same address to your arch box every time. That would depend on the capabilities of the system that provides the dhcp service.

How to get current suspended message ID from context

Hi all,
I'm trying to get the Suspended Message Id from my orchestration.
I don't want to get the this inside the orchestration, because that I already know how to do it.
I've search inside this forum and get a solution, but actually does not work.
Using this: Microsoft.XLANGs.Core.Service.RootService.InstanceId
(http://social.msdn.microsoft.com/Forums/en-US/95d2c9d9-5cbe-4bca-9cef-da7aba984d3c/how-do-i-access-instance-id-of-a-message-from-orchestration?forum=biztalkgeneral)
Also, I have searched in "all" properties of Microsoft.XLANGs.Core.Service.RootService and didn't had any luck
My goal?
I have a service that logs, to SQL, all errors in my biztalk applications. Right now is not saving the message id, and I do need. (I can easily change the method to receive the message id, but I'm trying to avoid that because I have 30 applications
using the same method/application).
Also, I have another service that is listening to all suspended messages.. In here I have the message Id (and other data) using WMI...
Now, I need to correlate both info..
Any help would be appreciated
Ricardo Bessa

Hi,
Thanks for the reply. My answers inline.
I already understood the logic that you said and I'm working on it. However, if you have more good inputs to give, please do!
Thanks
Hi Ricardo,
Let us be clear with your requirement.
“I
have another service that is listening to all suspended messages.. In here I have the message Id (and other data) using WMI... ”
- What this “service” is? Is this some service external to BizTalk from where you want to access the detail of the suspended message? If so then you go to use some way similar to my earlier reply. When you want to access the suspended message details,
you got to access it from management db. The code which I have given in my earlier reply would do that. No other option in this case.
Yes, I am already doing that. I'm using a Windows service that is listening for all suspended messages in BizTalk. In this
windows service I can access to everything that I want (message Id; service type id; instance id; and many other properties...). My issue is not in here.
“Actually
when i call Microsoft.XLANGs.Core.Service.RootService.InstanceId I'm getting the property SendingOrchestrationID.”
- Are you try to access the message Instance ID from another child orchestration?
SendingOrchestrationID is the orchestration instance
ID where the message originated and you would get it when another orchestration (subprocess) which has been triggered by another orchestration (parent orch whose ID is
SendingOrchestrationID). Detail us about where and how
to you get this SendingOrchestrationID.
Because when you want to access “Suspended” Orchestration’s message instance ID, you can’t achieve it by calling it from sub-processes.
I'm using a external (custom) class library.
I have a custom log which tracks everything that goes in our BizTalk applications. When errors / warning I write that to a database table.
This is made in different times, so when I log the error to the database I need "something" that exists in my other service (MEssageID; service type
id; instance id; or other 'unique' property). Also, I don't want to change the log method, because (if I do that, I would need to change 30 applications).
That's why I'm looking for a 'global' property that I can use, without changing (a lot) my code.
When an Orchestration is suspended, it will be marked as “Suspended” in db and to get the messages associated with it, access the suspended Orchestration instance
ID from the db and use this ID from db to get its related contents/messages IDs.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Ricardo Bessa

Mails are not going from apex application

Hi,
Mails are not going from my apex application. I had done the instance settings by logged in as admin. SMTP port is also connecting. Please help me to solve the issue.

Hi,
Mail queue is vacant. I think the problem is with the process. No process or validations are working. Actually, I have copied this application from another schema. Is there is need to set anything?..I had regenerated all the tables,functions,triggers in my schema .Processes and validations are completely inactive

IPod Touch Goes from 100% Charge to 20% within minutes

My iPod Touch is a little over two years old. It is now going from 100% battery charge to 20% within minutes of usage. However, when I plug it in to charge, the battery shows that it almost fully charged. Yet when I unplug it, it will immediately say the battery is at 20% again. Is the battery at it's end, or is this a different kind of issue causing the problem?

First try to reset your iPod and if that does not work, try restoring it to a backup and finally to factory settings. If that does not solve the problem, your battery is probably a goner. Two years is short, but not unusual; my battery failed after a little less than two years. Apple will replace your iPod with a refurbished one for $79 (USA) or you could do a Google search on "replace iPod battery" for a local or on line repair place that will replace the battery for less. You can even find a replacement battery (same search) and install it yourself if you're up to it.

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. What's wrong and how do I fix it? Help!

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!

Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport

Going from iphone 4s to 6 want to know if i can save and or tran my voicemails and voice memos to put on my new phone

going from 4s to 6 can I save my favorite voice mails and voice memos to put on my new phone via pc or cloud

If you are planning to set up your iPhone 6 by restoring the iCloud backup from the iPhone 4s, your Visual Voice Mails and Voice Memos will be restored.

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

Data not going from active data table to new data table -DSO activation iss

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
Please suggest.
Regards
Sudha

My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Hello jared1915
If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

HT4623 The software update option is not on my phone. It just goes from "about" to "usage". I have an iPhone 3G. Every time I try to update it on iTunes, nothing changes. I have version 4.2.1, no matter what I do. Any suggestions?

I have an iPhone 3G, and cannot update my iOS. In the General tab, "Upadate Software" is not even there. It just goes from "About" to "Usage". When I try to update on iTunes, it always remains the same. iOS 4.2.1. Any suggestions? (My PC uses Windows XP). Also, my WiFi has completely quit working. Works fine on the other iPhones in the house, as well as the XBox 360, so I am sure it's my phone. I tried everything I could think of, including restoring the iphone to factory settings & then updating, but no luck. Thank you! for any help you can give! I plan to get an iPhone 5, but wasn't ready to do it quite yet. Hopefully my phone can be rescued until I'm ready.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

I had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect my c even if i'm going from a 4 to a 5s?

i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?

Welcome to the Apple Community.
Yes you can probably delete the 2 incomplete back ups they are unlikely to work.
However, I'd be inclined to back up to a computer as well and restore from there, if you are changing your phone.

How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7.

How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7. I have the old hard drive hooked up as drive f. Can I copy and paste from old drive directory to new drive directory?

You need to copy 2 files, key3.db and signons.sqlite, from the old [[profiles|profile folder]] to the profile folder on the new computer.

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

[SOLVED] Suspend, temp3 goes from 20C to 100C

Similar Messages

Maybe you are looking for