[SOLVED] Touchpad problems with Kernel-2.6.28
I just updated my kernel to 2.6.28. Everythink is working fine (including my Atheros AGN wireless ). The only problem I have now is the Touchpad. After update the double click on the touchpad and the scroll function is not working any more.
Anyone knows why or is having the same problem?
Last edited by falke (2009-01-26 16:32:31)
Thanks a lot!!! It works! I cant live without touchpad scrolling.
I also needed to create /etc/hal/fdi/policy/shmconfig.fdi with this content:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="input.x11_driver" string="synaptics">
<merge key="input.x11_options.SHMConfig" type="string">True</merge>
</match>
</device>
</deviceinfo>
Similar Messages
-
[Solved]Touchpad problems with T60
The three buttons above my touch pad stopped working some time back(I think After an xorg upgrade) .
I thought it be a issue with new xorg and waited for next xorg update and found that the problem is still there after multiple upgrades, it never worked. And I am using the buttons below the touch pad.
Today I found that the joystick also is not working.
Is anybody else facing this probelm?
Can somebdy who is not seeing this issue please post your xorg.xonf , I will try that on my T60?
Including sections from my xorg.conf
Section "ServerLayout"
# PS/2 Mouse not detected
# Serial Mouse not detected
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
#InputDevice "Synaptics Touchpad" "SendCoreEvents"
#InputDevice "Mouse[1]" "CorePointer"
InputDevice "USB Mouse" "AlwaysCore"
InputDevice "Synaptics Touchpad" "SendCoreEvents"
Option "AIGLX" "true"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Synaptics Touchpad"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
Option "SHMConfig" "on"
EndSection
Last edited by srimalik (2008-03-04 04:33:53)The major xorg upgrade a while back changed some of the syntax. I have a T60 that's working fine now with
InputDevice "Touchpad" "CorePointer"
InputDevice "Mouse0" "SendCoreEvents"
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse1"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
I don't use a joystick, but this does work for an external mouse anyway -
i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2,66 GHz
Number of Processors: 2
Total Number of Cores: 4
L2 Cache (per Processor): 4 MB
Memory: 6 GB
Bus Speed: 1,33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version (system): 1.7f10
Serial Number (system): CK7XXXXXXGP
Hardware UUID: 00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version: Mac OS X 10.7.5 (11G63)
Kernel Version: Darwin 11.4.2
Boot Volume: Macintosh HD(2)
Boot Mode: Normal
Computer Name: Mac Pro van Juko de Vries
User Name: Juko de Vries (jukodevries)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No
Time since boot: 11 days 20:39
Message was edited by HostJava 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties. -
Laptop mode tools problem with kernel 3.0
today I just updated the system and my laptop runs dramatically hotter after that. I read the archwiki, it does talk about the laptop mode tools problem with kernel 3.0 but when I opened the file /usr/sbin/laptop_mode, the lines which the wiki mentions are not there. Does anyone here have the same problem and can you offer the solution?
Here is my /usr/sbin/laptop_mode
#! /bin/sh
# Script to start or stop laptop_mode, and to control various settings of the
# kernel, hardware etc. that influence power consumption.
# This script is a part of Laptop Mode Tools. If you are running a supported
# power management daemon, this script will be automatically called on power
# state change.
# Configure laptop mode tools in /etc/laptop-mode/laptop-mode.conf, and in
# the broken-out config files in /etc/laptop-mode/conf.d.
# Please consult the manual pages laptop-mode.conf(8) and laptop_mode(8) for
# additional information.
# Maintainer: Ritesh Raj Sarraf ([email protected])
# Original Author: Bart Samwel ([email protected])
# Project home page: http://samwel.tk/laptop_mode
# Contributors to this script: Bart Samwel
# Kiko Piris
# Micha Feigin
# Andrew Morton
# Herve Eychenne
# Dax Kelson
# Jan Polacek
# ... and many others that I've stopped
# keeping track of.
# Based on a script for Linux 2.4 written by Jens Axboe.
set -a
# The laptop mode tools version number. Extracted by the installer makefile
# as well, so don't change the format!
LMTVERSION=1.59
# This script is loaded from multiple scripts to set the config defaults
# and to read the configuration on top of those. Only when the command is
# recognized does this script do anything else.
VERBOSE_OUTPUT=0
ENABLE_LAPTOP_MODE_ON_BATTERY=1
ENABLE_LAPTOP_MODE_ON_AC=0
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0
PARTITIONS="auto /dev/mapper/*"
LM_BATT_MAX_LOST_WORK_SECONDS=600
LM_AC_MAX_LOST_WORK_SECONDS=360
DEF_MAX_AGE=30
LM_READAHEAD=3072
NOLM_READAHEAD=128
CONTROL_READAHEAD=1
CONTROL_NOATIME=0
USE_RELATIME=1
CONTROL_HD_IDLE_TIMEOUT=1
LM_AC_HD_IDLE_TIMEOUT=4 # 20 seconds
LM_BATT_HD_IDLE_TIMEOUT=4 # 20 seconds
NOLM_HD_IDLE_TIMEOUT=244 # 2 hours
DEF_UPDATE=5
DEF_XFS_AGE_BUFFER=15
DEF_XFS_SYNC_INTERVAL=30
DEF_XFS_BUFD_INTERVAL=1
XFS_HZ=100
CONTROL_MOUNT_OPTIONS=1
BATT_HD_POWERMGMT=1
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254
CONTROL_HD_POWERMGMT=0
CONTROL_HD_WRITECACHE=0
NOLM_AC_HD_WRITECACHE=1
NOLM_BATT_HD_WRITECACHE=0
LM_HD_WRITECACHE=0
LM_DIRTY_RATIO=60
LM_DIRTY_BACKGROUND_RATIO=1
NOLM_DIRTY_BACKGROUND_RATIO=10
NOLM_DIRTY_RATIO=40
LM_SECONDS_BEFORE_SYNC=2
BATT_CPU_MAXFREQ=medium
BATT_CPU_MINFREQ=slowest
BATT_CPU_GOVERNOR=ondemand
BATT_CPU_IGNORE_NICE_LOAD=1
LM_AC_CPU_MAXFREQ=fastest
LM_AC_CPU_MINFREQ=slowest
LM_AC_CPU_GOVERNOR=ondemand
LM_AC_CPU_IGNORE_NICE_LOAD=1
NOLM_AC_CPU_MAXFREQ=fastest
NOLM_AC_CPU_MINFREQ=slowest
NOLM_AC_CPU_GOVERNOR=ondemand
NOLM_AC_CPU_IGNORE_NICE_LOAD=0
CONTROL_CPU_FREQUENCY=0
HD="/dev/[hs]d[abcdefgh]"
CONTROL_SYSLOG_CONF=0
LM_AC_SYSLOG_CONF=/etc/syslog-on-ac-with-lm.conf
NOLM_AC_SYSLOG_CONF=/etc/syslog-on-ac-without-lm.conf
BATT_SYSLOG_CONF=/etc/syslog-on-battery.conf
SYSLOG_CONF_SIGNAL_PROGRAM=syslogd
SYSLOG_CONF=/etc/syslog.conf
CONTROL_DPMS_STANDBY=0
BATT_DPMS_STANDBY=300
LM_AC_DPMS_STANDBY=1200
NOLM_AC_DPMS_STANDBY=1200
CONTROL_CPU_THROTTLING=0
BATT_CPU_THROTTLING=medium
LM_AC_CPU_THROTTLING=minimum
NOLM_AC_CPU_THROTTLING=minimum
CONTROL_START_STOP=1
CONTROL_TERMINAL=0
TERMINALS="/dev/vc/1 /dev/vcs1"
BATT_TERMINAL_BLANK_MINUTES=1
BATT_TERMINAL_POWERDOWN_MINUTES=2
LM_AC_TERMINAL_BLANK_MINUTES=10
LM_AC_TERMINAL_POWERDOWN_MINUTES=10
NOLM_AC_TERMINAL_BLANK_MINUTES=10
NOLM_AC_TERMINAL_POWERDOWN_MINUTES=50
ENABLE_AUTO_HIBERNATION=0
HIBERNATE_COMMAND=/usr/sbin/hibernate
AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=1
DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1
AUTO_HIBERNATION_BATTERY_CHARGE_MAH=0
AUTO_HIBERNATION_BATTERY_CHARGE_MWH=0
MINIMUM_BATTERY_CHARGE_MAH=0
MINIMUM_BATTERY_CHARGE_MWH=0
ASSUME_SCSI_IS_SATA=1
CONTROL_BRIGHTNESS=0
BATT_BRIGHTNESS_COMMAND=false
LM_AC_BRIGHTNESS_COMMAND=false
NOLM_AC_BRIGHTNESS_COMMAND=false
LOG_TO_SYSLOG=1
DEBUG=0
ENABLE_LAPTOP_MODE_TOOLS=1
# Initialize the PATH Variable
export PATH="${PATH}":/bin:/sbin:/usr/bin:/usr/sbin
# This is a 2 phase locking approach. LMT_REQ_LOCK is the outer lock and LMT_INVOC_LOCK is the inner lock
# We take this approach to ensure the scenario that, "At any point when an event occurs (AC/BATT), the
# kernel can generate multiple events spanning over a couple of events. The first event is honored and
# lmt executes. If the last event triggered at the 9th second, there is a fair chance that a good amount
# of state change would have occured in the OS, to honor that state, we keep an outer lock (LMT_REQ_LOCK)
# handy, so that those changes can also be applied and not forgotten.
# Workflow:
# Event-1 is generated and lmt executes (lmt runtime could span 5-10 seconds)
# At seventh second, 4 events generate. But Event-1 is still running.
# We don't want to discard all the remaining 4 events, but at least honor 1 so that we can act to the changes
# that occured in the last 7 seconds.
# So, Event-2 acquire LMT_REQ_LOCK and waits to acquire LMT_INVOC_LOCK (which is acquire by Event-1)
LMT_REQ_LOCK="/var/lock/lmt-req.lock"
LMT_INVOC_LOCK="/var/lock/lmt-invoc.lock"
FLOCK=`which flock`
checkint ()
# $1 arg should be the string/integer
# that you want to check for as an integer.
echo $1 | grep "[^0-9]" > /dev/null 2>&1
return $?;
# Returns 1 if it is an integer
# Function to handle logging
LOGGER=`which logger`;
log ()
# $1 should be msg type
# $2 should be the real msg
if [ x$LOG_TO_SYSLOG = x1 ]; then
# NOTE: Add the check on $2 being empty, once you are confident
# that there aren't any bugs in logging. And no bugs in executing
# modules and logging
if [ -x $LOGGER -a "$1" != "STATUS" ]; then
#if [ -z $2 ]; then
# continue
#elif [ "$1" = "MSG" ]; then
if [ "$1" = "MSG" ]; then
logger -p daemon.info -t laptop-mode "$2";
elif [ "$1" = "ERR" ]; then
logger -p daemon.err -t laptop-mode "$2";
elif [ "$1" = "VERBOSE" ]; then
if [ x$VERBOSE_OUTPUT = x1 ]; then
logger -p daemon.debug -t laptop-mode "$2";
fi
else
logger -p daemon.notice -t laptop-mode "$2";
fi
fi
fi
if [ "$1" = "VERBOSE" ]; then
$LM_VERBOSE && echo "$2" >/dev/fd/2;
elif [ "$1" = "ERR" ]; then
echo "$2" >/dev/fd/2;
else
# Message of type MSG and STATUS can go to stdout.
echo "$2" >/dev/fd/1;
fi
enableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set -vx
fi
disableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set +vx
fi
# No default on these ones -- we need to detect if they have been set, for
# backward compatibility with MINIMUM_BATTERY_MINUTES etc.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=
MINIMUM_BATTERY_CHARGE_PERCENT=
# Backward compatibility variable that is sometimes
# set externally (Debian init system)
unset VERBOSE
lmt_load_config ()
# Source config. Some config settings have been moved from the main config file
# to modular configuration files, and to support existing laptop-mode.conf
# files from earlier versions, we source the modular configuration files FIRST.
if [ -d /etc/laptop-mode/conf.d ] ; then
for CONF in /etc/laptop-mode/conf.d/*.conf ; do
if [ -r "$CONF" ] ; then
. "$CONF"
#Handle individual module debug settings
if [ "$DEBUG" -eq 1 ]; then
export $(basename $CONF | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG=1
log "VERBOSE" "Enabling debug mode for module $CONF"
fi
DEBUG=0
else
log "MSG" "Warning: Configuration file $CONF is not readable, skipping."
fi
done
fi
if [ -r /etc/laptop-mode/laptop-mode.conf ] ; then
. /etc/laptop-mode/laptop-mode.conf
else
log "ERR" "$0: Configuration file /etc/laptop-mode/laptop-mode.conf not present or not readable."
exit 1
fi
if [ x$ENABLE_LAPTOP_MODE_TOOLS = x0 ]; then
log "MSG" "laptop-mode-tools is disabled in config file. Exiting"
exit 0;
fi
# Add a simple bash debug mode switch
if [ "$DEBUG" -eq 1 ]; then
set -vx;
fi
# Support for old config settings
if [ "$AC_HD" != "" ] ; then
AC_HD_WITHOUT_LM="$AC_HD"
AC_HD_WITH_LM="$AC_HD"
fi
if [ "$VERBOSE" != "" ] ; then
VERBOSE_OUTPUT="$VERBOSE"
fi
if [ "$CPU_MAXFREQ" != "" ] ; then
BATT_CPU_MAXFREQ="$CPU_MAXFREQ"
fi
if [ "$MAX_AGE" != "" ] ; then
LM_BATT_MAX_LOST_WORK_SECONDS="$MAX_AGE"
LM_AC_MAX_LOST_WORK_SECONDS="$MAX_AGE"
fi
if [ "$DEF_AGE" != "" ] ; then
DEF_MAX_AGE="$DEF_AGE"
fi
if [ "$LAPTOP_MODE_ALWAYS_ON" != "" ] ; then
ENABLE_LAPTOP_MODE_ALWAYS="$LAPTOP_MODE_ALWAYS_ON"
fi
if [ "$LM_WHEN_LID_CLOSED" != "" ] ; then
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED="$LM_WHEN_LID_CLOSED"
fi
if [ "$REMOUNT_PARTITIONS" != "" ] ; then
PARTITIONS="$REMOUNT_PARTITIONS"
fi
if [ "$READAHEAD" != "" ] ; then
LM_READAHEAD="$READAHEAD"
fi
if [ "$DO_REMOUNT_NOATIME" != "" ] ; then
CONTROL_NOATIME="$DO_REMOUNT_NOATIME"
fi
if [ "$DO_HD" != "" ] ; then
CONTROL_HD_IDLE_TIMEOUT="$DO_HD"
fi
if [ "$AC_HD_WITH_LM" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT="$AC_HD_WITH_LM"
fi
if [ "$AC_HD_WITHOUT_LM" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT="$AC_HD_WITHOUT_LM"
fi
if [ "$BATT_HD" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT="$BATT_HD"
fi
if [ "$DO_REMOUNTS" != "" ] ; then
CONTROL_MOUNT_OPTIONS="$DO_REMOUNTS"
fi
if [ "$DO_HD_POWERMGMT" != "" ] ; then
CONTROL_HD_POWERMGMT="$DO_HD_POWERMGMT"
fi
if [ "$AC_HDPARM_POWERMGMT_WITH_LM" != "" ] ; then
LM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITH_LM"
fi
if [ "$AC_HDPARM_POWERMGMT_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITHOUT_LM"
fi
if [ "$BATT_HDPARM_POWERMGMT" != "" ] ; then
BATT_HD_POWERMGMT="$BATT_HDPARM_POWERMGMT"
fi
if [ "$DO_WRITECACHE" != "" ] ; then
CONTROL_HD_WRITECACHE="$DO_WRITECACHE"
fi
if [ "$AC_WRITECACHE_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_WRITECACHE="$AC_WRITECACHE_WITHOUT_LM"
fi
if [ "$BATT_WRITECACHE" != "" ] ; then
LM_HD_WRITECACHE="$BATT_WRITECACHE"
fi
if [ "$DIRTY_RATIO" != "" ]; then
LM_DIRTY_RATIO="$DIRTY_RATIO"
fi
if [ "$DIRTY_BACKGROUND_RATIO" != "" ] ; then
LM_DIRTY_BACKGROUND_RATIO="$DIRTY_BACKGROUND_RATIO"
fi
if [ "$DEF_DIRTY_RATIO" != "" ]; then
NOLM_DIRTY_RATIO="$DEF_DIRTY_RATIO"
fi
if [ "$DEF_DIRTY_BACKGROUND_RATIO" != "" ] ; then
NOLM_DIRTY_BACKGROUND_RATIO="$DEF_DIRTY_BACKGROUND_RATIO"
fi
if [ "$DO_CPU" != "" ] ; then
CONTROL_CPU_FREQUENCY="$DO_CPU"
fi
if [ "$CONTROL_CPU_MAXFREQ" != "" ] ; then
CONTROL_CPU_FREQUENCY="$CONTROL_CPU_MAXFREQ"
fi
if [ "$AC_CPU_MAXFREQ_WITH_LM" != "" ] ; then
LM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITH_LM"
fi
if [ "$AC_CPU_MAXFREQ_WITHOUT_LM" != "" ] ; then
NOLM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITHOUT_LM"
fi
if [ "$DO_SYSLOG" != "" ] ; then
CONTROL_SYSLOG_CONF="$DO_SYSLOG"
fi
if [ "$SYSLOG_SIGNAL_PROGRAM" != "" ] ;then
SYSLOG_CONF_SIGNAL_PROGRAM="$SYSLOG_SIGNAL_PROGRAM"
fi
if [ "$AC_SYSLOG_WITH_LM" != "" ] ; then
LM_AC_SYSLOG_CONF="$AC_SYSLOG_WITH_LM"
fi
if [ "$AC_SYSLOG_WITHOUT_LM" != "" ] ; then
NOLM_AC_SYSLOG_CONF="$AC_SYSLOG_WITHOUT_LM"
fi
if [ "$BATT_SYSLOG" != "" ] ; then
BATT_SYSLOG_CONF="$BATT_SYSLOG"
fi
if [ "$ENABLE_LAPTOP_MODE_ALWAYS" != "" ] ; then
ENABLE_LAPTOP_MODE_ON_AC="$ENABLE_LAPTOP_MODE_ALWAYS"
fi
if [ "$MINIMUM_BATTERY_MINUTES" != "" -a "$MINIMUM_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
MINIMUM_BATTERY_CHARGE_PERCENT="$MINIMUM_BATTERY_MINUTES"
fi
if [ -z "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
MINIMUM_BATTERY_CHARGE_PERCENT=3
fi
if [ "$AUTO_HIBERNATION_BATTERY_MINUTES" != "" -a "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT="$AUTO_HIBERNATION_BATTERY_MINUTES"
fi
if [ -z "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=2
fi
# Postprocessing
if [ "$VERBOSE_OUTPUT" -ne 0 ] ; then
OUTPUT="/dev/stdout"
LM_VERBOSE="[ 1 = 1 ]"
else
OUTPUT="/dev/null"
LM_VERBOSE="[ 1 = 0 ]"
fi
if [ "$PARTITIONS" = "" ] ; then
PARTITIONS="auto /dev/mapper/*"
fi
# Expand shell wild cards immediately.
PARTITIONS=$( echo $PARTITIONS )
TERMINALS=$( echo $TERMINALS )
# Convert seconds to hdparm -S format
# Everything over 20 minutes is interpreted as 2 hours.
seconds_to_hdparm_S() {
if [ "$1" -eq 0 ] ; then
# disable.
echo 0
elif [ "$1" -gt 0 -a "$1" -lt 5 ] ; then
# 5 seconds minimum
echo 1
elif [ "$1" -le $((240*5)) ] ; then
# Values between 1 and 240 signify increments of 5 seconds
echo $(($1 / 5))
elif [ "$1" -lt $((30*60)) ] ; then
# Values between 20 and 30 minutes are rounded up to 30 minutes.
echo 241
elif [ "$1" -lt $((12*30*60)) ] ; then
# Values between 30 minutes and 6 hours (exclusive) yield values between
# 241 and 251, in 30-minute increments.
echo $(( 240 + ($1 / (30*60)) ))
else
# Larger values effectively indicate no timeout at all.
echo 0
fi
# Convert configured idle timeouts to hdparm -S format.
if [ "$LM_AC_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_AC_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$LM_BATT_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_BATT_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$NOLM_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $NOLM_HD_IDLE_TIMEOUT_SECONDS)
fi
# The main workhorse.
lmt_main_function ()
if [ "$1" = "status" ] ; then
# Display a status report.
log "STATUS" "Mounts:"
mount | sed "s/^/ /"
log "STATUS" " "
log "STATUS" "Drive power status:"
for disk in $HD; do
if [ -r $disk ]; then
hdparm -C $disk 2>/dev/null | sed "s/^/ /"
else
log "STATUS" " Cannot read $disk, permission denied - $0 needs to be run as root"
fi
done
log "STATUS" " "
log "STATUS" "(NOTE: drive settings affected by Laptop Mode cannot be retrieved.)"
log "STATUS" " "
log "STATUS" "Readahead states:"
cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do
# skip funny stuff
case "$FST" in
rootfs|unionfs|tmpfs|squashfs|sysfs|usbfs|proc|devpts) continue
esac
if [ -b $DEV ] ; then
if [ -r $DEV ] ; then
log "STATUS" " $DEV: $((`blockdev --getra $DEV` / 2)) kB"
else
log "STATUS" " Cannot read $DEV, permission denied - $0 needs to be run as root"
fi
fi
done
log "STATUS" " "
if [ -e /var/run/laptop-mode-tools/enabled ] ; then
log "STATUS" "Laptop Mode Tools is allowed to run: /var/run/laptop-mode-tools/enabled exists."
else
log "STATUS" "Laptop Mode Tools is NOT allowed to run: /var/run/laptop-mode-tools/enabled does not exist."
fi
log "STATUS" " "
STATFILES="/proc/sys/vm/laptop_mode /proc/apm /proc/pmu/info /proc/sys/vm/bdflush /proc/sys/vm/dirty_ratio /proc/sys/fs/xfs/age_buffer /proc/sys/fs/xfs/sync_interval /proc/sys/fs/xfs/lm_age_buffer /proc/sys/fs/xfs/lm_sync_interval /proc/sys/vm/pagebuf/lm_flush_age /proc/sys/fs/xfs/xfsbufd_centisecs /proc/sys/fs/xfs/xfssyncd_centisecs /proc/sys/vm/dirty_background_ratio /proc/sys/vm/dirty_expire_centisecs /proc/sys/fs/xfs/age_buffer/centisecs /proc/sys/vm/dirty_writeback_centisecs /sys/devices/system/cpu/*/cpufreq/cpuinfo_*_freq /sys/devices/system/cpu/*/cpufreq/scaling_governor /proc/acpi/button/lid/*/state /proc/acpi/ac_adapter/*/state /proc/acpi/battery/*/state /sys/class/power_supply/*/online /sys/class/power_supply/*/state"
for THISFILE in $STATFILES ; do
if [ -e "$THISFILE" ] ; then
log "STATUS" "$THISFILE:"
if [ -r "$THISFILE" ] ; then
cat "$THISFILE" | sed "s/^/ /"
else
log "STATUS" " Not accessible, permission denied - $0 needs to be run as root."
fi
log "STATUS" " "
fi
done
elif [ "$1" != "readconfig" -a "$1" != "defaults" ] ; then
KLEVEL="$(uname -r |
IFS='.-' read a b c
echo $a.$b
KMINOR="$(uname -r |
IFS='.-' read a b c d
# Strip any stuff from the end -- only the initial digits are part of the KMINOR.
echo $c | sed -e 's/\([[:digit:]]*\).*/\1/'
# Stop exporting everything -- what we do from here is private.
set +a
if [ "$1" = "--version" ] ; then
log "MSG" "Laptop Mode Tools $LMTVERSION"
exit 0
fi
if [ ! -e /proc/sys/vm/laptop_mode ] ; then
log "ERR" "Kernel does not have support for laptop mode. Please apply the laptop mode"
log "ERR" "patch or install a newer kernel."
exit 1
fi
if [ ! -w /proc/sys/vm/laptop_mode ] ; then
log "ERR" "You do not have enough privileges to enable laptop_mode."
exit 1
fi
INIT=0 # Display info in init script format?
FORCE=0 # Force reapplying the current state?
while [ "$1" != "" ] ; do
case "$1" in
init) INIT=1 ;;
force) FORCE=1 ;;
# Old options. We always do "auto" for any option now, but
# we still have to accept the options.
start) ;;
stop) ;;
auto) ;;
modules=*)
MODULES=$1
MODULES=${MODULES#"modules="}
devices=*)
DEVICES=$1
DEVICES=${DEVICES#"devices="}
*) log "ERR" "Unrecognized option $1."
exit 1 ;;
esac
shift
done
mkdir -p /var/run/laptop-mode-tools
# Used to display laptop mode state later on. This is the enabled/disabled
# state for laptop mode processing, it tells us nothing about whether laptop
# mode is actually _active_.
STATE=enabled
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -eq 0 -a "$ENABLE_LAPTOP_MODE_ON_AC" -eq 0 -a "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -eq 0 ] ; then
STATE=disabled
fi
# Determine the power state.
# First try /sys/class/power_supply/*
FOUND_SYS_CLASS_POWER_SUPPLY_AC=0
ON_AC=0
for POWER_SUPPLY in /sys/class/power_supply/* ; do
if [ -f $POWER_SUPPLY/type ] ; then
if [ "$(cat $POWER_SUPPLY/type)" = "Mains" ] ;then
log "VERBOSE" "Determining power state from $POWER_SUPPLY/online."
FOUND_SYS_CLASS_POWER_SUPPLY_AC=1
if [ "$(cat $POWER_SUPPLY/online)" = 1 ] ; then
ON_AC=1
fi
fi
fi
done
if [ $FOUND_SYS_CLASS_POWER_SUPPLY_AC = 1 ] ; then
# Already found it!
log "VERBOSE" "Not trying other options, already found a power supply."
elif [ -d /proc/acpi/ac_adapter ] ; then
log "VERBOSE" "Determining power state from /proc/acpi/ac_adapter."
ADAPTERS_FOUND=0
ON_AC=0
for ADAPTER in /proc/acpi/ac_adapter/* ; do
if [ -f $ADAPTER/state ] ; then
ADAPTERS_FOUND=1
STATUS=`awk '/^state: / { print $2 }' $ADAPTER/state`
if [ "$STATUS" = "on-line" ] ; then
ON_AC=1
fi
fi
done
if [ "$ADAPTERS_FOUND" -eq 0 ] ; then
ON_AC=1
fi
elif [ -f /proc/pmu/info ] ; then
log "VERBOSE" "Determining power state from /proc/pmu/info."
if ( grep -q "^AC Power.*0$" /proc/pmu/info ) ; then
log "VERBOSE" "/proc/pmu/info indicates absence of AC power."
ON_AC=0
else
# It is possible that there is no AC Power = 1 in the file,
# but we always assume AC power when we're not sure.
ON_AC=1
log "VERBOSE" "/proc/pmu/info indicates presence of AC power."
fi
elif [ -f /proc/apm ] ; then
log "VERBOSE" "Determining power state from /proc/apm."
read D1 D2 D3 APM_AC_STATE D0 </proc/apm
if [ "$APM_AC_STATE" = "0x00" ] ; then
ON_AC=0
else
ON_AC=1
fi
else
log "VERBOSE" "No /sys/class/power_supply, ACPI, APM or PMU power management information found -- assuming AC power is present."
ON_AC=1
fi
# Determine whether to activate or deactivate laptop mode.
ACTIVATE=0
if [ "$ON_AC" -eq 1 ] ; then
if [ "$ENABLE_LAPTOP_MODE_ON_AC" -ne 0 ] ; then
log "VERBOSE" "On AC power: Activating, because ENABLE_LAPTOP_MODE_ON_AC is set."
ACTIVATE=1
else
log "VERBOSE" "On AC power: Deactivating, because ENABLE_LAPTOP_MODE_ON_AC is not set."
ACTIVATE=0
fi
else
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -ne 0 ] ; then
log "VERBOSE" "On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set."
ACTIVATE=1
else
log "VERBOSE" "On battery power: Deactivating, because ENABLE_LAPTOP_MODE_ON_BATTERY is not set."
ACTIVATE=0
fi
fi
if [ "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -ne 0 -a "$ACTIVATE" -eq 0 ] ; then
if [ -x "`which hal-find-by-property`" ] ; then
HAL_LID_BUTTON=$(hal-find-by-property --key "button.type" --string "lid")
fi
if [ "$HAL_LID_BUTTON" != "" ] ; then
HAL_LID_BUTTON_STATE=$(hal-get-property --udi $(hal-find-by-property --key "button.type" --string "lid") --key "button.state.value")
if [ "$HAL_LID_BUTTON_STATE" = "true" ] ; then
log "VERBOSE" "Setting action to \"start\" because the lid is closed (says HAL)."
ACTIVATE=1
fi
elif [ -f /proc/acpi/button/lid/*/state ] ; then
if ( grep -q "closed" /proc/acpi/button/lid/*/state ) ; then
log "VERBOSE" 'Setting action to "start" because the lid is closed (says /proc/acpi/button/lid/*/state).'
ACTIVATE=1
fi
else
log "MSG" "Warning: ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED is set, but there is no file"
log "MSG" "/proc/acpi/button/lid/.../state, and hal information is not available either!"
fi
fi
# If the init script has not been run or has been run with the "stop"
# argument, then we should never start laptop mode.
if [ ! -f /var/run/laptop-mode-tools/enabled ] ; then
log "VERBOSE" "Laptop mode disabled because /var/run/laptop-mode-tools/enabled is missing."
STATE=disabled
fi
if [ "$ACTIVATE" -eq 1 -a -f /etc/default/laptop-mode ] ; then
. /etc/default/laptop-mode
if ! ( echo "$ENABLE_LAPTOP_MODE" |grep y ) ; then
log "VERBOSE" "Not starting laptop mode because it is disabled in /etc/default/laptop-mode."
STATE=disabled
fi
fi
if [ "$STATE" = "disabled" ] ; then
ACTIVATE=0
fi
# Check whether we are allowed to activate the data-loss-sensitive stuff.
# If the battery charge is too low, we want to disable this, but not the
# other power-saving stuff.
if [ "$ACTIVATE" -eq 0 ] ; then
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
elif [ "$ON_AC" = 1 ] ; then
log "VERBOSE" "On AC, not checking minimum battery charge."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
else
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
ENOUGH_CHARGE=0
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=0
# Weird way of checking that /sys/class/power_supply is not empty -- but it works.
if [ "$(echo /sys/class/power_supply/*)" != '/sys/class/power_supply/*' ] ; then
log "VERBOSE" "Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge."
for BATT in /sys/class/power_supply/* ; do
BATT_TYPE=$(cat $BATT/type)
log "VERBOSE" "$BATT is of type $BATT_TYPE."
if [ "$BATT_TYPE" != "Battery" ] ; then
log "VERBOSE" "Not of type \"Battery\", skipping."
else
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
log "VERBOSE" "Checking levels for $BATT."
PRESENT=$(cat $BATT/present)
log "VERBOSE" "Present: $PRESENT."
# Only do if the battery is present
if [ "$PRESENT" -eq 1 ] ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
IN_UAH=0
IN_UWH=0
if [ -f $BATT/charge_now ] ; then
REMAINING=$(cat $BATT/charge_now)
IN_UAH=1 # charge_* is in microAmpere-hours
elif [ -f $BATT/energy_now ] ; then
REMAINING=$(cat $BATT/energy_now)
IN_UWH=1 # energy_* is in microWatt-hours
else
REMAINING=0
fi
if [ -z "$REMAINING" -o "$REMAINING" -eq 0 ] ; then
log "VERBOSE" "Battery does not report remaining charge. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
if [ -f $BATT/charge_full_design ] ; then
CAPACITY=$(cat $BATT/charge_full_design)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full_design)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report design full charge, using non-design full charge."
if [ -f $BATT/charge_full ] ; then
CAPACITY=$(cat $BATT/charge_full)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report non-design full charge."
CAPACITY=0
fi
fi
log "VERBOSE" "Full capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# $BATT/alarm is the design_capacity_warning of a battery.
ALARM_LEVEL=$(cat $BATT/alarm)
if [ "$ALARM_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values
if [ "$IN_UAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_UWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh, uWh, mAh or uAh."
fi
else
log "VERBOSE" "Battery is not present."
fi
fi
done
elif [ "$(echo /proc/acpi/battery/*)" != '/proc/acpi/battery/*' ] ; then
log "VERBOSE" "Not on AC and we have batteries in /proc/acpi/battery -- checking minimum battery charge."
for BATT in /proc/acpi/battery/* ; do
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
BATT_STATE=$BATT/state
BATT_INFO=$BATT/info
log "VERBOSE" "Checking info and state for $BATT."
# Only do if the battery is present
if ( grep -q 'present:.*yes' $BATT_INFO ) ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
REMAINING=`grep "remaining capacity:" $BATT_STATE | sed "s/.* \([0-9][0-9]* \).*/\1/" `
if [ -z "$REMAINING" ] ; then
log "VERBOSE" "Battery does not report remaining charte. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
CAPACITY=`grep "design capacity:" $BATT_INFO | sed "s/.* \([0-9][0-9]* \).*/\1/" `
if [ -z "$CAPACITY" ] ; then
log "VERBOSE" "Battery does not report capacity. Perhaps it is not present?"
CAPACITY=0
fi
log "VERBOSE" "Design capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values.
# Determine the reporting unit.
IN_MAH=0
IN_MWH=0
if ( grep -q mWh $BATT_INFO ) ; then
IN_MWH=1
elif ( grep -q mAh $BATT_INFO ) ; then
IN_MAH=1
fi
if [ "$IN_MAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_MWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh or mAh."
fi
CAP_STATE=`sed -r 's/^capacity state:\s*(.*)\s*$/\1/;t;d' "$BATT_STATE"`
if [ "$DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "VERBOSE" "Battery is not present."
fi
done
else
ENOUGH_CHARGE=1
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
log "VERBOSE" "Not on AC and could not check battery state -- data loss sensitive features stay enabled and auto-hibernation will not work."
fi
if [ "$ENABLE_AUTO_HIBERNATION" -ne 0 -a "$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the auto-hibernation level."
log "VERBOSE" "Starting hibernation."
if [ -x $HIBERNATE_COMMAND ]; then
$HIBERNATE_COMMAND
elif [ -f /sys/power/state ]; then
grep -q disk /sys/power/state && echo disk > /sys/power/state
fi
# Don't continue -- if things are configured correctly, then we
# will be called on resume.
exit 0
fi
if [ "$ENOUGH_CHARGE" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the minimum level."
log "VERBOSE" "Deactivating data loss sensitive features."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
fi
fi
if [ "$INIT" -eq 0 ] ; then
log "MSG" "Laptop mode "
fi
# WAS_ACTIVE is used later on. If there is no /var/run/laptop-mode-tools/state, then
# we know that laptop mode wasn't active before.
WAS_ACTIVE=0
log "VERBOSE" "Checking if desired state is different from current state."
if [ -f /var/run/laptop-mode-tools/state ] ; then
read WAS_ACTIVE WAS_ON_AC WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS WAS_STATE < /var/run/laptop-mode-tools/state
if [ "$WAS_STATE" != "" ] ; then
if [ "$WAS_ACTIVE" -eq "$ACTIVATE" -a "$WAS_ON_AC" -eq "$ON_AC" -a "$WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -a "$WAS_STATE" = "$STATE" -a "$FORCE" -eq 0 ] ; then
log "MSG" "$STATE, "
if [ "$WAS_ACTIVE" -eq 1 ] ; then
log "MSG" "active [unchanged]"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "not active [unchanged]"
fi
exit 0
fi
fi
else
log "VERBOSE" "/var/run/laptop-mode-tools/state does not exist, no previous state."
fi
echo "$ACTIVATE $ON_AC $ACTIVATE_WITH_POSSIBLE_DATA_LOSS $STATE" > /var/run/laptop-mode-tools/state
if [ "$ACTIVATE" -eq 1 ] ; then
log "MSG" "$STATE, active"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "$STATE, not active"
fi
# Finally, call laptop-mode-tools modules. The modules can use the settings
# from the config files, but they may NOT assume the settings actually exist,
# as no defaults have been given for them.
# Note that the /usr/local/lib path is deprecated.
export FORCE STATE ON_AC ACTIVATE ACTIVATE_WITH_POSSIBLE_DATA_LOSS KLEVEL KMINOR WAS_ACTIVE LM_VERBOSE DEVICES
for SCRIPT in /usr/share/laptop-mode-tools/modules/* /usr/local/lib/laptop-mode-tools/modules/* /usr/local/share/laptop-mode-tools/modules/* /etc/laptop-mode/modules/* ; do
if [ -z "$MODULES" ] ; then
# If a module list has not been provided, execute all modules
EXECUTE_SCRIPT=1
else
# If a module list has been provided, execute only the listed
# modules.
EXECUTE_SCRIPT=0
for MODULE in $MODULES; do
# Attempt to remove the module name from the end of the
# full script path. If the module name matches the
# script, the name will be removed from the end of the
# full file path, leaving the path to the script. If
# there was not a match made, the module name would not
# be removed from the path, and $PATH_TO_SCRIPT would
# be the same as $SCRIPT.
PATH_TO_SCRIPT=${SCRIPT%%$MODULE}
# Execute the script if a match was found (module name
# was removed from the script path, making it shorter.
if [ $PATH_TO_SCRIPT != $SCRIPT ] ; then
EXECUTE_SCRIPT=1
fi
done
fi
if [ -x "$SCRIPT" -a $EXECUTE_SCRIPT -eq 1 ] ; then
log "VERBOSE" "Invoking module $SCRIPT."
SCRIPT_DEBUG=$SCRIPT; # We do this because in start-stop-programs module a $SCRIPT variable is used. That
# changes the whole meaning when passed to disableDebug ()
enableDebug $SCRIPT_DEBUG;
. $SCRIPT
disableDebug $SCRIPT_DEBUG;
else
log "VERBOSE" "Module $SCRIPT is not executable or is to be skipped."
fi
done
exit 0
# This fi closes the if for "readconfig". If I would have indented this one
# I would have indented the whole file. :)
fi
lmt_load_config
lock_retry ()
( $FLOCK -n -x -w 1 8 || exit 0;
i=10;
while [ $i -ge 1 ]
do
log "ERR" "Couldn't acquire lock. Retrying.... PID is $$\n"
$FLOCK -x -w 1 9 && lmt_main_function "$@" && break;
i=$(( $i - 1 ))
done
) 8>$LMT_REQ_LOCK
# Check and acquire locks and then exec.
( $FLOCK -n -x -w 1 8; ) 8>$LMT_REQ_LOCK
($FLOCK -n -x -w 1 9 && lmt_main_function "$@";) || lock_retry "$@"
) 9<>$LMT_INVOC_LOCK
# We do a special run of battery polling daemon here so that it does not get
# plagued by the lock. We need the polling daemon to be independent of any locks
if [ x$ENABLE_BATTERY_LEVEL_POLLING = x1 ] && [ x$BLACKLIST_IN_FLOCK = x1 ]; then
log "VERBOSE" "Battery level polling is enabled."
if [ x$ON_AC = x1 ] ; then
log "VERBOSE" "On AC, stopping the polling daemon."
# In AC mode we disable the polling daemon.
killall -q lm-polling-daemon
else
if ! pidof -x lm-polling-daemon ; then
log "VERBOSE" "On battery and there was no polling daemon yet, starting the polling daemon."
# If there is no polling daemon, we start one.
/usr/share/laptop-mode-tools/module-helpers/lm-polling-daemon < /dev/null > /dev/null 2> /dev/null &
fi
fi
else
log "VERBOSE" "Battery level polling is disabled."
fi
exit 0;
and here is the lines which archwiki mentions
case "$KLEVEL" in
"2.4" ) ;;
"2.6" ) ;;
log "ERR" "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
exit 1
esacI had the problem but edited the line in /usr/sbin/laptop_mode and it worked. But thoes lines are not there anymore. I guess they changed it at the recent update of laptop-mode-tools.
Regarding your heat problem; is there any other thing you use to cut down power usage (from AUR maybe)? I use acpi_call from AUR had to edit lines there aswell, but it should be updated by now. -
I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy -
HT4623 How can i solve installation problem with iOS 6.
How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!
can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs -
Easier and better ways to solve current problems with Acrobat?
Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
Regards,
MarcSorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
Regards,
Marc
Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
Re: Easier and better ways to solve current problems with Acrobat?
created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
Thanks,
David
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store
Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN -
Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!
Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!
Same here. Everything was fine running on ios 6.0, I don't know what possessed me to upgrade! I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network. I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy! This is clearly a faulty software update and need fixing pronto! I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem. When will this be realeased Apple?! It's hardly fit for purpose when I can't make calls or surf the internet.
-
How to reset the BIOS to solve a problem with DVD burner on Satellite P100
Hi
I am trying to reset my cmos to solve a problem with my dvd burner.
I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completly inoperable.
After much searching I have heard to reset cmos.
I have treid through debug and nothing happend. I don't really want to open up the laptop and pull the cmos battery out or leave it for a month until the cmos battery runs out.
Is there any advice on what I should do.Hi
What you want to do is simply not possible you said that you had some problems with PCs and you fixed it.
That's great. But a PC is simply different and cannot be compared with the notebook
> I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completely inoperable.
According to your statement above you CD/DVD drive issue could be related to the installed starforce nightmare. I dont know this but I presume this software/application has changed or destroyed the CD/DVD drives firmware.
Sorry but I see only one way to get it working again You have to contact the ASP in your country. Maybe a technician would be able to rescue the drive
PS: your Satellite P100 PSPA6A series seems to be a Australian series therefore you should use the Toshiba Australian page if you need some drivers or BIOS
Bye -
HELP! Problem with KERNEL PANICS!
Hi everyone!
I have a serious problem with kernel panics - it doesn't seem to be connected with a certain type of program, but seems to be completely random. I have reinstalled my OS X and updated it, but the kernel panics just keep on coming and if possible it actually seemed to make matters worse! Now it doesn't always show the bar at the top of the screen when I turn it on, and sometimes programs like iTunes and Safari, just won't work until I restart the mac. I've also done a harware test - no faults detected. I had an idea that it might be AutoCad causing it, as it started sometime after I installed it - it was also the first program I reinstalled after OS X reinstallation - but I haven't used the AutoCad a whole lot and the panics happen way more often.
I am completely at a loss now as I'm not exactly a computer expert. If anyone can deduce something from my most recent panic log which could help me find out what's causing all this, I would greatly appreciate it!
Interval Since Last Panic Report: 95470 sec
Panics Since Last Report: 8
Anonymous UUID: 42BB5090-A5E7-0888-436E-5D5C4A60A868
Wed Oct 24 18:43:40 2012
panic(cpu 1 caller 0xffffff80192b7bd5): Kernel trap at 0xffffff8019266e6d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff74254ab050, CR3: 0x000000000fb2f000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0xffffff74254ab040, RCX: 0xffffffffffffffff, RDX: 0xffffff007de5c000
RSP: 0xffffff8091413590, RBP: 0xffffff80914135f0, RSI: 0xffffff80253fa610, RDI: 0xffffff007de5f000
R8: 0x0000000000000000, R9: 0x0000000000003000, R10: 0x0000000000000000, R11: 0x0000000000000212
R12: 0xffffff8027014ba0, R13: 0xffffff801c599bd8, R14: 0xffffff007de5c000, R15: 0xffffff801c599bc8
RFL: 0x0000000000010293, RIP: 0xffffff8019266e6d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff74254ab050, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff8091413230 : 0xffffff801921d626
0xffffff80914132a0 : 0xffffff80192b7bd5
0xffffff8091413470 : 0xffffff80192ce4ed
0xffffff8091413490 : 0xffffff8019266e6d
0xffffff80914135f0 : 0xffffff8019264c3f
0xffffff80914136a0 : 0xffffff8019264f60
0xffffff80914136d0 : 0xffffff8019224624
0xffffff8091413700 : 0xffffff8019622ca2
0xffffff8091413720 : 0xffffff7f9985bcd6
0xffffff8091413740 : 0xffffff7f9985e447
0xffffff8091413790 : 0xffffff7f9985c086
0xffffff80914137d0 : 0xffffff7f9985cb41
0xffffff8091413990 : 0xffffff7f998593f2
0xffffff8091413ee0 : 0xffffff801968393f
0xffffff8091413f50 : 0xffffff80195e182a
0xffffff8091413fb0 : 0xffffff80192ced33
Kernel Extensions in backtrace:
com.apple.security.sandbox(220.0)[BFFEC437-6820-3CDD-882F-346EAC151352]@0xfffff f7f99855000->0xffffff7f99865fff
dependency: com.apple.kext.AppleMatch(1.0.0d1)[327C619E-5CC2-311F-8B0C-F9D508BFD5B0]@0xffff ff7f99851000
BSD process name corresponding to current thread: awacsd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000019000000
Kernel text base: 0xffffff8019200000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 48426823677
last loaded kext at 24167594711: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f9ac61000, size 32768)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.1f2
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f33
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250,06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x06400000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x06300000 / 2Hi everyone!
I have a serious problem with kernel panics - it doesn't seem to be connected with a certain type of program, but seems to be completely random. I have reinstalled my OS X and updated it, but the kernel panics just keep on coming and if possible it actually seemed to make matters worse! Now it doesn't always show the bar at the top of the screen when I turn it on, and sometimes programs like iTunes and Safari, just won't work until I restart the mac. I've also done a harware test - no faults detected. I had an idea that it might be AutoCad causing it, as it started sometime after I installed it - it was also the first program I reinstalled after OS X reinstallation - but I haven't used the AutoCad a whole lot and the panics happen way more often.
I am completely at a loss now as I'm not exactly a computer expert. If anyone can deduce something from my most recent panic log which could help me find out what's causing all this, I would greatly appreciate it!
Interval Since Last Panic Report: 95470 sec
Panics Since Last Report: 8
Anonymous UUID: 42BB5090-A5E7-0888-436E-5D5C4A60A868
Wed Oct 24 18:43:40 2012
panic(cpu 1 caller 0xffffff80192b7bd5): Kernel trap at 0xffffff8019266e6d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff74254ab050, CR3: 0x000000000fb2f000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0xffffff74254ab040, RCX: 0xffffffffffffffff, RDX: 0xffffff007de5c000
RSP: 0xffffff8091413590, RBP: 0xffffff80914135f0, RSI: 0xffffff80253fa610, RDI: 0xffffff007de5f000
R8: 0x0000000000000000, R9: 0x0000000000003000, R10: 0x0000000000000000, R11: 0x0000000000000212
R12: 0xffffff8027014ba0, R13: 0xffffff801c599bd8, R14: 0xffffff007de5c000, R15: 0xffffff801c599bc8
RFL: 0x0000000000010293, RIP: 0xffffff8019266e6d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff74254ab050, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff8091413230 : 0xffffff801921d626
0xffffff80914132a0 : 0xffffff80192b7bd5
0xffffff8091413470 : 0xffffff80192ce4ed
0xffffff8091413490 : 0xffffff8019266e6d
0xffffff80914135f0 : 0xffffff8019264c3f
0xffffff80914136a0 : 0xffffff8019264f60
0xffffff80914136d0 : 0xffffff8019224624
0xffffff8091413700 : 0xffffff8019622ca2
0xffffff8091413720 : 0xffffff7f9985bcd6
0xffffff8091413740 : 0xffffff7f9985e447
0xffffff8091413790 : 0xffffff7f9985c086
0xffffff80914137d0 : 0xffffff7f9985cb41
0xffffff8091413990 : 0xffffff7f998593f2
0xffffff8091413ee0 : 0xffffff801968393f
0xffffff8091413f50 : 0xffffff80195e182a
0xffffff8091413fb0 : 0xffffff80192ced33
Kernel Extensions in backtrace:
com.apple.security.sandbox(220.0)[BFFEC437-6820-3CDD-882F-346EAC151352]@0xfffff f7f99855000->0xffffff7f99865fff
dependency: com.apple.kext.AppleMatch(1.0.0d1)[327C619E-5CC2-311F-8B0C-F9D508BFD5B0]@0xffff ff7f99851000
BSD process name corresponding to current thread: awacsd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000019000000
Kernel text base: 0xffffff8019200000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 48426823677
last loaded kext at 24167594711: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f9ac61000, size 32768)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.1f2
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f33
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250,06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x06400000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x06300000 / 2 -
Solved flicker problem with newer fglrx drivers
This has been annoying me since the move from 8.29 to 8.30: I have an integrated Xpress 200 on my laptop, and newer proprietary drivers caused the screen to flicker. This has caused me to stick with the older drivers, which restricted upgrades to X.org and the kernel. I was misled by some posts on the Internet to believe that this was the result of using custom modelines.
I have finally solved the problem yesterday. I am posting my findings in case anyone else has been suffering from the same behaviour.
The newer drivers come with an ACPI script, installed under /etc/acpi. The script is invoked every minute and inspects the current power status (i.e., A/C or battery). It then invokes
aticonfig --set-powermode=[MODE]
to adjust the driver to the new settings. Each time this command is executed, it causes the screen to flicker.
Obviously, there is no need to run the script if the power mode has not changed since the last call. I have therefore modified the script to first check the current driver power mode, and execute the mode command only if a new setting is required.
I hope this helps someone.I need my hand held a bit here...
this seems to be the problem I'm having, ie the ac/battery event being called too frequently, but have no idea how to edit the script. I'm on an asus w3n, will it help to replace apci with asus-laptop and apcid daemon...or just add those and leave acpi daemon?
apologies for my numbnut newbie-ness. -
SAP Solution Manager SR1 with MSSQL on W2K3 IA32 - Problem with Kernel
Hello,
we are implementing a sandbox in order to test the SAP Solution Manager 4.0 SR1 with MSSQL on W2K3 IA32. Therefore we ordered the installation CD for the above mentioned configuration. Instead of getting the SAP NETWEAVER Kernel SR1 we got SR2. Now we have the problem, that the installation program SAPINST is requesting the SR1- Kernel.
Unforunately the SR1-Kernel seems no longer available in the download section.
It would be fine to get a suggestion how to solve the problem.
Thanks
Best regards
Ralf Richter ([email protected])Hi Andreas,
thanks for the hint, I have already checked the LABEL.ASC. I have no LABEL.ASC-Key for the SAP Netweaver 2004s SR1, so it would be a possibilty to substitue this key. But neverhteless, I think, there should be another official procedure in order to use the SR2 instead of the old SR1. I have contacted Klaus Billing at SAP as recommended in the OSS Note 918078. Best regards. Ralf R. -
[SOLVED] Installation problem with pacstrap
Hi guys, I am a new user of Arch Linux.
I wanted to try this operating system then I decided to install that on my Asus F200MA. Unfortunately, when I try to install ArchLinux, I get an error while downloading the base packages with pacstrap.
My HDD is made by 3 partitions:
/dev/sda1 - 51200 MB: This is the root partition
/dev/sda2 - 411690 MB: This is the home partition
/dev/sda3 - 4096 MB: This is the swap partition
After mounting these partitions, after using the pacstrap command and after the end of the download process, I get a few error messages:
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
I really can't understand the reason of these errors, how can I solve the problem?
For formatting and mounting the partitions I used these commands:
# mkfs.ext4 /dev/sda1
# mkfs.ext4 /dev/sda2
# mkswap /dev/sda3
# swapon /dev/sda3
# mount /dev/sda1 /mnt
# mkdir /mnt/home
# mount /dev/sda2 /mnt/home
and then I used this command:
pacstrap /mnt base base-devel
Photo of the errors: http://i.imgur.com/4BRhlC7.jpg
P.S.: Can you also explain me the reason of the signature's errors?
Thanks for all
Last edited by xRedFox (2015-04-10 21:59:20)Do you use the most recent installation disc image?
-
[SOLVED?] Problem with nVidia card
This is my first post, so; hello to everyone!! Thx in advance to this great community!!
My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
The Xorg.0.log and dmesg.log files are atached at the end of this thread.
I hope that annyone can help me.
Thx in advance again.
The Xorg.0.log file contains this:
[ 15.809]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 15.814] X Protocol Version 11, Revision 0
[ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
[ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[ 15.815] Kernel command line: root=/dev/sda5 ro
[ 15.815] Build Date: 09 July 2011 07:57:07AM
[ 15.815]
[ 15.815] Current version of pixman: 0.22.2
[ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
[ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.835] (==) ServerLayout "Layout0"
[ 15.835] (**) |-->Screen "Screen0" (0)
[ 15.835] (**) | |-->Monitor "Monitor0"
[ 15.836] (**) | |-->Device "Device0"
[ 15.836] (**) |-->Input Device "Keyboard0"
[ 15.836] (**) |-->Input Device "Mouse0"
[ 15.836] (==) Automatically adding devices
[ 15.836] (==) Automatically enabling devices
[ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.859] (==) FontPath set to:
/usr/share/fonts/misc/
[ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.859] (**) Extension "Composite" is disabled
[ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.859] (WW) Disabling Keyboard0
[ 15.859] (WW) Disabling Mouse0
[ 15.859] (II) Loader magic: 0x822e1a0
[ 15.859] (II) Module ABI versions:
[ 15.859] X.Org ANSI C Emulation: 0.4
[ 15.859] X.Org Video Driver: 10.0
[ 15.859] X.Org XInput driver : 12.2
[ 15.859] X.Org Server Extension : 5.0
[ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.860] (II) LoadModule: "extmod"
[ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.880] (II) Module extmod: vendor="X.Org Foundation"
[ 15.880] compiled for 1.10.3, module version = 1.0.0
[ 15.880] Module class: X.Org Server Extension
[ 15.880] ABI class: X.Org Server Extension, version 5.0
[ 15.880] (II) Loading extension MIT-SCREEN-SAVER
[ 15.880] (II) Loading extension XFree86-VidModeExtension
[ 15.880] (II) Loading extension XFree86-DGA
[ 15.880] (II) Loading extension DPMS
[ 15.880] (II) Loading extension XVideo
[ 15.880] (II) Loading extension XVideo-MotionCompensation
[ 15.880] (II) Loading extension X-Resource
[ 15.880] (II) LoadModule: "dbe"
[ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.881] (II) Module dbe: vendor="X.Org Foundation"
[ 15.881] compiled for 1.10.3, module version = 1.0.0
[ 15.881] Module class: X.Org Server Extension
[ 15.881] ABI class: X.Org Server Extension, version 5.0
[ 15.881] (II) Loading extension DOUBLE-BUFFER
[ 15.881] (II) LoadModule: "glx"
[ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.640] compiled for 4.0.2, module version = 1.0.0
[ 16.640] Module class: X.Org Server Extension
[ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
[ 16.640] (II) Loading extension GLX
[ 16.640] (II) LoadModule: "record"
[ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.645] (II) Module record: vendor="X.Org Foundation"
[ 16.645] compiled for 1.10.3, module version = 1.13.0
[ 16.645] Module class: X.Org Server Extension
[ 16.645] ABI class: X.Org Server Extension, version 5.0
[ 16.645] (II) Loading extension RECORD
[ 16.645] (II) LoadModule: "dri"
[ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.661] (II) Module dri: vendor="X.Org Foundation"
[ 16.661] compiled for 1.10.3, module version = 1.0.0
[ 16.661] ABI class: X.Org Server Extension, version 5.0
[ 16.661] (II) Loading extension XFree86-DRI
[ 16.661] (II) LoadModule: "dri2"
[ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.662] (II) Module dri2: vendor="X.Org Foundation"
[ 16.662] compiled for 1.10.3, module version = 1.2.0
[ 16.662] ABI class: X.Org Server Extension, version 5.0
[ 16.662] (II) Loading extension DRI2
[ 16.662] (II) LoadModule: "nvidia"
[ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.709] compiled for 4.0.2, module version = 1.0.0
[ 16.709] Module class: X.Org Video Driver
[ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
[ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.740] (++) using VT number 7
[ 16.751] (II) Loading sub module "fb"
[ 16.751] (II) LoadModule: "fb"
[ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.762] (II) Module fb: vendor="X.Org Foundation"
[ 16.762] compiled for 1.10.3, module version = 1.0.0
[ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.762] (II) Loading sub module "wfb"
[ 16.762] (II) LoadModule: "wfb"
[ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.769] (II) Module wfb: vendor="X.Org Foundation"
[ 16.769] compiled for 1.10.3, module version = 1.0.0
[ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.769] (II) Loading sub module "ramdac"
[ 16.769] (II) LoadModule: "ramdac"
[ 16.769] (II) Module "ramdac" already built-in
[ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.780] (==) NVIDIA(0): RGB weight 888
[ 16.780] (==) NVIDIA(0): Default visual is TrueColor
[ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
[ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
[ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 17.859] (==) NVIDIA(0):
[ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 17.859] (==) NVIDIA(0): will be used as the requested mode.
[ 17.859] (==) NVIDIA(0):
[ 17.859] (II) NVIDIA(0): Validated modes:
[ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
[ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
[ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
[ 17.900] (--) NVIDIA(0): option
[ 17.900] (--) Depth 24 pixmap format is 32 bpp
[ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 17.905] (II) NVIDIA(0): Config Options in the README.
[ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 17.946] (II) Loading extension NV-GLX
[ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.002] (==) NVIDIA(0): Backing store disabled
[ 18.002] (==) NVIDIA(0): Silken mouse enabled
[ 18.002] (**) NVIDIA(0): DPMS enabled
[ 18.002] (II) Loading extension NV-CONTROL
[ 18.003] (II) Loading extension XINERAMA
[ 18.003] (II) Loading sub module "dri2"
[ 18.003] (II) LoadModule: "dri2"
[ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.003] (II) Module dri2: vendor="X.Org Foundation"
[ 18.003] compiled for 1.10.3, module version = 1.2.0
[ 18.003] ABI class: X.Org Server Extension, version 5.0
[ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.003] (==) RandR enabled
[ 18.003] (II) Initializing built-in extension Generic Event Extension
[ 18.003] (II) Initializing built-in extension SHAPE
[ 18.003] (II) Initializing built-in extension MIT-SHM
[ 18.003] (II) Initializing built-in extension XInputExtension
[ 18.003] (II) Initializing built-in extension XTEST
[ 18.003] (II) Initializing built-in extension BIG-REQUESTS
[ 18.003] (II) Initializing built-in extension SYNC
[ 18.003] (II) Initializing built-in extension XKEYBOARD
[ 18.003] (II) Initializing built-in extension XC-MISC
[ 18.003] (II) Initializing built-in extension SECURITY
[ 18.003] (II) Initializing built-in extension XINERAMA
[ 18.003] (II) Initializing built-in extension XFIXES
[ 18.003] (II) Initializing built-in extension RENDER
[ 18.003] (II) Initializing built-in extension RANDR
[ 18.003] (II) Initializing built-in extension COMPOSITE
[ 18.003] (II) Initializing built-in extension DAMAGE
[ 18.005] (II) Initializing extension GLX
[ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.213] (II) LoadModule: "evdev"
[ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (II) Module evdev: vendor="X.Org Foundation"
[ 18.214] compiled for 1.10.0, module version = 2.6.0
[ 18.214] Module class: X.Org XInput Driver
[ 18.214] ABI class: X.Org XInput driver, version 12.2
[ 18.214] (II) Using input driver 'evdev' for 'Power Button'
[ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (**) Power Button: always reports core events
[ 18.214] (**) Power Button: Device: "/dev/input/event3"
[ 18.226] (--) Power Button: Found keys
[ 18.226] (II) Power Button: Configuring as keyboard
[ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.226] (**) Option "xkb_rules" "evdev"
[ 18.226] (**) Option "xkb_model" "evdev"
[ 18.226] (**) Option "xkb_layout" "us"
[ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.252] (II) Using input driver 'evdev' for 'Power Button'
[ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.252] (**) Power Button: always reports core events
[ 18.252] (**) Power Button: Device: "/dev/input/event2"
[ 18.266] (--) Power Button: Found keys
[ 18.266] (II) Power Button: Configuring as keyboard
[ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.266] (**) Option "xkb_rules" "evdev"
[ 18.266] (**) Option "xkb_model" "evdev"
[ 18.266] (**) Option "xkb_layout" "us"
[ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
[ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
[ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
[ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
[ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
[ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
[ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
[ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
[ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
[ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
[ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
[ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
[ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
[ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
[ 18.283] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.300] (--) AT Translated Set 2 keyboard: Found keys
[ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 18.300] (**) Option "xkb_rules" "evdev"
[ 18.300] (**) Option "xkb_model" "evdev"
[ 18.300] (**) Option "xkb_layout" "us"
[ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 18.300] (II) No input driver/identifier specified (ignoring)
[ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1563.587] (II) NVIDIA(0): Config Options in the README.
And the dmesg.log file contains this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f41f0] f41f0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
[ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
[ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
[ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
[ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: root=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8388096 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2700.236 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
[ 0.016870] pid_max: default: 32768 minimum: 301
[ 0.016983] Security Framework initialized
[ 0.017051] AppArmor: AppArmor disabled by boot time parameter
[ 0.017144] Mount-cache hash table entries: 512
[ 0.017404] Initializing cgroup subsys ns
[ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.017549] Initializing cgroup subsys cpuacct
[ 0.017625] Initializing cgroup subsys memory
[ 0.017701] Initializing cgroup subsys devices
[ 0.017767] Initializing cgroup subsys freezer
[ 0.017833] Initializing cgroup subsys net_cls
[ 0.017899] Initializing cgroup subsys blkio
[ 0.017995] CPU: Physical Processor ID: 0
[ 0.018060] CPU: Processor Core ID: 0
[ 0.018126] mce: CPU supports 5 MCE banks
[ 0.018199] using C1E aware idle routine
[ 0.019127] ACPI: Core revision 20110316
[ 0.023362] ftrace: allocating 15225 entries in 30 pages
[ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.063329] Performance Events: AMD PMU driver.
[ 0.063329] ... version: 0
[ 0.063329] ... bit width: 48
[ 0.063329] ... generic registers: 4
[ 0.063329] ... value mask: 0000ffffffffffff
[ 0.063329] ... max period: 00007fffffffffff
[ 0.063329] ... fixed-purpose events: 0
[ 0.063329] ... event mask: 000000000000000f
[ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[ 0.106676] Booting Node 0, Processors #1
[ 0.106783] smpboot cpu 1: start_ip = 9b000
[ 0.019998] Initializing CPU#1
[ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206657] Brought up 2 CPUs
[ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
[ 0.207206] devtmpfs: initialized
[ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[ 0.207649] print_constraints: dummy:
[ 0.207764] NET: Registered protocol family 16
[ 0.207919] node 0 link 0: io port [c000, ffff]
[ 0.207922] TOM: 0000000080000000 aka 2048M
[ 0.207987] node 0 link 0: mmio [a0000, bffff]
[ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
[ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.207997] bus: [00, 03] on node 0 link 0
[ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.208011] ACPI: bus type pci registered
[ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.208292] PCI: Using MMCONFIG for extended config space
[ 0.208357] PCI: Using configuration type 1 for base access
[ 0.208842] bio: create slab <bio-0> at 0
[ 0.210574] ACPI: EC: Look up EC in DSDT
[ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.214150] ACPI: Interpreter enabled
[ 0.214220] ACPI: (supports S0 S3 S4 S5)
[ 0.214501] ACPI: Using IOAPIC for interrupt routing
[ 0.225790] ACPI: No dock devices found.
[ 0.225854] HEST: Table not found.
[ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.226639] pci 0000:00:02.0: PME# disabled
[ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.226696] pci 0000:00:0a.0: PME# disabled
[ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
[ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.227351] pci 0000:00:13.5: supports D1 D2
[ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.227357] pci 0000:00:13.5: PME# disabled
[ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.227667] pci 0000:00:14.2: PME# disabled
[ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
[ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233535] pci 0000:02:00.0: supports D1 D2
[ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233541] pci 0000:02:00.0: PME# disabled
[ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.240236] pci_bus 0000:00: on NUMA node 0
[ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.258522] vgaarb: loaded
[ 0.258678] PCI: Using ACPI for IRQ routing
[ 0.258742] PCI: pci_cache_line_size set to 64 bytes
[ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.259004] NetLabel: Initializing
[ 0.259067] NetLabel: domain hash size = 128
[ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259205] NetLabel: unlabeled traffic allowed by default
[ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.261015] Switching to clocksource hpet
[ 0.261499] Switched to NOHz mode on CPU #0
[ 0.261582] Switched to NOHz mode on CPU #1
[ 0.266362] pnp: PnP ACPI init
[ 0.266443] ACPI: bus type pnp registered
[ 0.266593] pnp 00:00: [bus 00-ff]
[ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.266792] pnp 00:01: [io 0x4100-0x411f]
[ 0.266794] pnp 00:01: [io 0x0228-0x022f]
[ 0.266796] pnp 00:01: [io 0x040b]
[ 0.266798] pnp 00:01: [io 0x04d6]
[ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
[ 0.266801] pnp 00:01: [io 0x0c14]
[ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
[ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 0.266807] pnp 00:01: [io 0x0c6f]
[ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
[ 0.266815] pnp 00:01: [io 0x4210-0x4217]
[ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
[ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.267264] system 00:01: [io 0x040b] has been reserved
[ 0.267330] system 00:01: [io 0x04d6] has been reserved
[ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.267461] system 00:01: [io 0x0c14] has been reserved
[ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.267662] system 00:01: [io 0x0c6f] has been reserved
[ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268290] pnp 00:02: [dma 4]
[ 0.268291] pnp 00:02: [io 0x0000-0x000f]
[ 0.268293] pnp 00:02: [io 0x0080-0x0090]
[ 0.268295] pnp 00:02: [io 0x0094-0x009f]
[ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
[ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.268366] pnp 00:03: [irq 0 disabled]
[ 0.268380] pnp 00:03: [irq 8]
[ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.268430] pnp 00:04: [io 0x0070-0x0073]
[ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268463] pnp 00:05: [io 0x0061]
[ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.268504] pnp 00:06: [irq 13]
[ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.268566] pnp 00:07: [io 0x0010-0x001f]
[ 0.268567] pnp 00:07: [io 0x0022-0x003f]
[ 0.268569] pnp 00:07: [io 0x0044-0x005f]
[ 0.268571] pnp 00:07: [io 0x0062-0x0063]
[ 0.268573] pnp 00:07: [io 0x0065-0x006f]
[ 0.268575] pnp 00:07: [io 0x0074-0x007f]
[ 0.268576] pnp 00:07: [io 0x0091-0x0093]
[ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269033] pnp 00:08: [io 0x0060]
[ 0.269034] pnp 00:08: [io 0x0064]
[ 0.269043] pnp 00:08: [irq 1]
[ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
[ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
[ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
[ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
[ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
[ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269930] pnp: PnP ACPI: found 10 devices
[ 0.269994] ACPI: ACPI bus type pnp unregistered
[ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307175] pci 0000:00:02.0: setting latency timer to 64
[ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
[ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307274] NET: Registered protocol family 2
[ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308719] TCP reno registered
[ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309050] NET: Registered protocol family 1
[ 0.426742] pci 0000:01:00.0: Boot video device
[ 0.426749] PCI: CLS 64 bytes, default 64
[ 0.426800] Unpacking initramfs...
[ 0.460291] Freeing initrd memory: 2140k freed
[ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 0.461707] apm: disabled - APM is not SMP safe.
[ 0.461884] audit: initializing netlink socket (disabled)
[ 0.461957] type=2000 audit(1312207987.459:1): initialized
[ 0.462290] highmem bounce pool size: 64 pages
[ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.464180] VFS: Disk quotas dquot_6.5.2
[ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.464469] msgmni has been set to 1712
[ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.464841] io scheduler noop registered
[ 0.464907] io scheduler deadline registered
[ 0.464983] io scheduler cfq registered (default)
[ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.465393] ERST: Table is not found!
[ 0.465467] isapnp: Scanning for PnP cards...
[ 0.822554] isapnp: No Plug & Play device found
[ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.050792] mousedev: PS/2 mouse device common for all mice
[ 1.050892] rtc_cmos 00:04: RTC can wake from S4
[ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.076954] cpuidle: using governor ladder
[ 1.077018] cpuidle: using governor menu
[ 1.077281] TCP cubic registered
[ 1.077345] NET: Registered protocol family 17
[ 1.077415] Registering the dns_resolver key type
[ 1.077492] Using IPI No-Shortcut mode
[ 1.077626] PM: Hibernation image not present or could not be loaded.
[ 1.077633] registered taskstats version 1
[ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
[ 1.078086] Initializing network drop monitor service
[ 1.078222] Freeing unused kernel memory: 512k freed
[ 1.078587] Write protecting the kernel text: 3380k
[ 1.078672] Write protecting the kernel read-only data: 1028k
[ 1.088713] udevd[47]: starting version 171
[ 1.180160] SCSI subsystem initialized
[ 1.197209] usbcore: registered new interface driver usbfs
[ 1.197412] usbcore: registered new interface driver hub
[ 1.197625] usbcore: registered new device driver usb
[ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
[ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.237087] libata version 3.00 loaded.
[ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.240292] hub 1-0:1.0: USB hub found
[ 1.240359] hub 1-0:1.0: 10 ports detected
[ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.241613] scsi0 : pata_atiixp
[ 1.241804] scsi1 : pata_atiixp
[ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.307508] hub 2-0:1.0: USB hub found
[ 1.307579] hub 2-0:1.0: 2 ports detected
[ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.384201] hub 3-0:1.0: USB hub found
[ 1.384274] hub 3-0:1.0: 2 ports detected
[ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.460849] hub 4-0:1.0: USB hub found
[ 1.460923] hub 4-0:1.0: 2 ports detected
[ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.537463] hub 5-0:1.0: USB hub found
[ 1.537533] hub 5-0:1.0: 2 ports detected
[ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.610820] hub 6-0:1.0: USB hub found
[ 1.610890] hub 6-0:1.0: 2 ports detected
[ 1.611025] ahci 0000:00:12.0: version 3.0
[ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.612922] scsi2 : ahci
[ 1.613831] scsi3 : ahci
[ 1.614815] scsi4 : ahci
[ 1.614997] scsi5 : ahci
[ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
[ 2.106684] ata3: softreset failed (device not ready)
[ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.106831] ata4: softreset failed (device not ready)
[ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279701] ata4.00: configured for UDMA/100
[ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.284533] ata3.00: configured for UDMA/133
[ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
[ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
[ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
[ 2.411669] usbcore: registered new interface driver usbhid
[ 2.411745] usbhid: USB HID core driver
[ 2.437927] sda: sda1 sda2 sda3 < sda5 >
[ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.003984] udevd[255]: starting version 171
[ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.140858] ACPI: Power Button [PWRB]
[ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.141058] ACPI: Power Button [PWRF]
[ 4.154881] Linux agpgart interface v0.103
[ 4.157785] ACPI: Fan [FAN] (on)
[ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.161972] ACPI: acpi_idle registered with cpuidle
[ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.228336] sky2: driver version 1.28
[ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
[ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
[ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
[ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
[ 4.357033] ACPI: Invalid passive threshold
[ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
[ 4.476360] Disabling lock debugging due to kernel taint
[ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
[ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.775620] hda_codec: ALC888: BIOS auto-probing.
[ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
[ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
Last edited by Fuentes (2011-08-16 22:44:13)the contents of /home/user/.xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
Object::connect: No such signal QDBusAbstractInterface::Changed()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00141
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x8bf31cc
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00141
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00143
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00143
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00145
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00145
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00147
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00147
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00149
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00149
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014b
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014b
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014d
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014f
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014f
Object::connect: No such signal QDBusAbstractInterface::Changed()
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
QProcess: Destroyed while process is still running.
plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
ksmserver: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kded4: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
Maybe you are looking for
-
I've the following c function: extern "C" __declspec( dllexport ) char cGreeting(char* value1, char* value2); And follow PL/SQL code: PACKAGE BODY SAMPLE IS FUNCTION greeting(value1 IN OUT VARCHAR2, value2 IN OUT VARCHAR2) RETURN VARCHAR2 IS
-
I need some people who can test the following for me - Wake on Ethernet Acc
Hey there, i am sorry for crossposting but i need someone who can confirm something like a bug in 10.6.2 SL. What you need: Two Macs running 10.6.2 SL which are in the same Network. The following settings need to be activated on both Macs: 1. System
-
I'd like to know how to use this. I've set an input text field with initial text with a style of italics, I'd like to have it change to normal when the user enters new text. I can't find anything to explain the proper syntax, and what I'm doing doesn
-
Using F: Drive as default for Itunes instead of C drive?
Hope some tech-savvy user can help me. (But maybe this is simple and I am an idiot after trying to figure it out for 2 hours on my own with no success.) We bought a 800 Gig external hard drive (F) and I moved my Itunes library (movies, podcasts, musi
-
Execution Take place more then once ?
<b>Hi, Here is code which is executed for more then once</b> <i> Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent If pVal.Form