Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Same here.  Everything was fine running on ios 6.0, I don't know what possessed me to upgrade!  I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network.  I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy!  This is clearly a faulty software update and need fixing pronto!  I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem.   When will this be realeased Apple?!  It's hardly fit for purpose when I can't make calls or surf the internet. 

Similar Messages

  • Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • Hello!  I have an iMac that I lose the audio output for certain profiles.  The audio output will work on one profile, but when switching to another profile, I lose the audio output.  I've reset the NVRAM/PRAM and that hasn't solved the problem.  Help!

    Hello!
    I have an iMac (running iOS 10.6.8, not upgraded to Lion) that I'm having audio issues with.  I have 5 profiles on this machine.  The audio output will work fine out of one profile, then when switched to another, the profile will not have any audio output at all.  Rebooting the machine will occasionally solve the problem.  Administrator permissions are not the issue since this has also manifested itself on the administrator profile. I've also reset the NVRAM/PRAM and that hasn't helped.  All my software is up to date and I recently upgraded the RAM to 2x2GB sticks.  This problem was existing prior to the RAM upgrade. 
    Any suggestions?  Thanks in advance!

    Hi Tony,
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • How do i solve the problem with repeated renew lease requests

    How can i solve the problem of repeated renew lease requests?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    You don't say what you are doing or trying to do. See #5 below.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netwhttp://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-wonhttp://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bughttp://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading-http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hhttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sighttp://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-Ohttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connecthttp://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipadhttp://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asphttp://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxEhttp://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmzhttp://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • When is apple going to solve the problems with the 4S battery???

    I bought a new iPhone 4S last week and I have some many problems with the battery the first day, but I thought it must be something normal because of the first time but the few next days it was the same. On Thursday morning I received the iOS 5.0.1 update and I thought it was going to solve the problem but it wasn't!! So I called Apple and they told me I should restore my phone and after that it was supossed to work properly, but it didn't so they told me I should go to an Aple Store and they would change my phone but... it's supossed that all 4S have the same problem so... I would have a new iPhone one week later but with the same problem?? If Apple solve the problem in days, weeks or even months are they going to give us the new (working-properly) phone instead our old one??
    Thank you very much!!

    Some Users have reported that a Restore has Resolved Issues...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • FCPX10.1.1 does not solve the problem with long-time clip editing!

    OS: clean installed mac os10.9.1
    FCPX: FCPX10.1.1
    Project: 4clips, all of the clips is about 1 hour long (dvcprohd)
    Disk: 900MB/S++
    machine specs:
    2*3.06Ghz 6-core
    24GB DDR3
    and I've tried these graphic cards:
    K5000
    and
    2 5770
    all get the same results:
    If I double press the "L" key, the response of FCPX is too slow
    If I do other operation like browse the clip, or import long time clip,
    the FCPX will become too slow to browse the timeline.
    I've found the FCPX like to generate audio waves of the clip and
    there's no option to shutdown this! I've tried all the options in FCPX like
    do not show the waveform of audio in preference and close the audio waveform in timeline
    I don't think I can work the project with 10.1.x.
    the 10.0.9 also has the 1st problem, but don't have the 2nd problem.
    Another project: 2000++ 4K 50P clips(XAVC), but on FCPX 10.0.9, all of the clips is less than 40mins, always 20seconds.
    though it will get slower when we import clips day after day,
    it's much more smoother than 10.1.1!!!!!!
    so,
    I don't think we should update to 10.1.x for the little promotion of performance.
    and 10.1.x also do not support nvidia K5000 card.
    the render is slower than ait5700.....
    I hope apple can solve the problem,
    all of the above is just basic editing needs!
    if the fcpx can not do even a long-time clip editing
    why should I use it?

    2 project:
    1. 4*1 hour clips dvcprohd
    that's the problem! I can not bear it.
    2. 2000++clips 4K XAVC 50P project which I don't run on FCPX 10.1.1
    I run it in fcpx10.0.9, it's fine, but slower when I imported more and more clips.
    until now I can bear it.
    the fcpx10.1.1 editing long-time clip has problem:
    1.
    it use 150MB/s harddisk speed to generate the waveform.
    I have 900MB/s disk speed, so that's not the problem,
    but it generate all the time!
    1 hour clip's wavefrom generates for 1 hour without stopping, if I stop it , the fcpx crashed!
    2.
    when I skimming the clip for editing, the fcpx gets slower, always 2mins to response my operation.
    3.
    when I double press J or L key, the fcpx will need about 1 min to response.
    the FCPX10.0.9 editing long-time clip problem:
    the fcpx10.0.9 can handle the long-time clips, but also has very slow response when I doulbe press J or L key.

  • How I managed to solve the problems with the 1.2 iPod/7.0 iTunes Upgrade

    As many of you know there are several people that have experienced a problem with or after upgrading their iPods and iTunes. While mine is not the definitive answer, it is one that worked for me and I hope that by sharing this, many will receive a benefit.
    This applies mainly to Mac users as my platform is MAC OS X based.
    Proceedure:
    1. Download the stand alone copy of iTunes 7.0
    2. Repair disk permissions. (I found that many of my iTunes permissions were in error after my initial upgrade to 7.0 directly via iTunes)
    3. Perform a hard reset on your iPod (Menu and select buttons)
    4. If your iPod is connected or disconnect it doesn't really matter, just make sure that it is ejected and not being used by iTunes.
    5. Install itunes again.
    6. Now iTunes is installed, it should see your iPod. (It may or may not try to sync. If is syncs let it, if not repeat step 3 with the iPod connected. This should facilitate it being seen by iTunes)
    7. Perform a restore.
    8. Just sit back and wait until it installs all the info back.
    I tried this method and it worked. My iPod and iTunes are in perfect unison as before.
    Hope this helps

    Don - Specifically, what problems were you having before your fix? I'm able to upgrade my 60GB iPod to firmware 1.2, but then it gets the scrambled screen and freezes. I downgraded to 1.1.2 and re-loaded 1.2 with the same results. So far I haven't located any fixes for this problem, which could be hardware related.
    Powermac G5, iMac G5, MacBook   Mac OS X (10.4.7)  

  • How can I solve the problem with Adobe viewer/player ?

    Dear guys in Apple support team
    I have a MacBook Pro 13' late 2011, several months ago I updated my mac to mountain lion and I can say its really great operating system and I really enjoy working with it. The only problem I have is that more than twice a day while using my computer for reading a paper in PDF or in online PDF's or sometimes watching flash videos online, cooling fan starts to work faster and when I look up in the activity monitor, more than 60% of the CPU processing is engaged with Adobe player/viewer and I have to kill the process to stop cooling fan and release the cpu process. My adobe products are in the latest update and there should not be any problem about that.
    Please help me solve this problem and enjoy more than ever from your creative products.
    Thank a lot
    Ali

    Flash has always been a problem hogging the CPU. Recent versions, however, have been a little better. You might try Adobe Flash Player 11.7.700.169. I would also recommend the Safari extensions ClickToFlash 2.7.5 and FlashToHTML5 2.4.

  • Does restoring your iPod solve the problem with the updater?

    I have a fourth generation iPod and I downloaded the 10-12-2005 updater. Since then my click wheel will not work, but all the buttons on my iPod still work. I have looked through the discussions and many other people have this same problem, but i have not found any solution. Will restoring my iPod solve this problem? I want to be sure before I erase everything.

    The music will come of your iPod but STAY on your computer. Documents that are on your iPod should be backed up because they will be deleted as well. Check the link below if you need more help.
    http://docs.info.apple.com/article.html?artnum=60983

  • My sound is like echo and i can't solve the problem with realtek hd audio manager

    HP G72 notebook
    Windows 7 64 bit
    Sound is like echo and can't solve problem with Realtek HD audio manager

    It's a Qosmio X300-16M (windows 7 64bit)
    I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
    It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
    And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
    Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
    And I just want to know if it's a curent problem or not... and if someone can fix it

  • Has anyone solved the problem with " lagging " response when opening nay app ?

    since " upgrading " ( if you can call it that ! ) to IOS7 on iPhone 4, everyone is complaining about the delay when opening any App. At the Genius bar at Apple store they referred to this as " lagging ". After a quick diagnostic of my phone, they suggested a full Restore. Big waste of my time and data. No change whatsoever. I had to go through the full process of syncronizing music and photos and resetting everything.
    I also talked about the new Calendar and especially the Reminders. The new Reminders App is quite simply horrible and no longer attractive and consequently a useless Icon. Even the calendar is labor intensive. I tried to register a future doctor's appointment and the receptionist finally said " Why dont I just call you a day befpre ? ". How Apple managed to make something so simple so complicated is beyond me. The rotary calendar anc clock is a joke.
    It bears repeating, Apple makes too many unnecessary design changes, I dont want to have to invest all this time going to work shops to figure out what they have done with basic apps, especially if its to find out what I already figured out.
    I would however like to know what Apple intends to do about the lagging. I have another 18 months on the iPhone 4.

    No. It was designed to work that way.
    Allan

  • How to solve the problem with time difference?

    Hi,
    I work in India with time difference about 12 hours faster than American time.
    I put a validation in my application as follows:
    IF :P2_FINISH_DATE > SYSDATE THEN
    return false;
    else
    return true;
    end if;
    Today (13-Mar-09) at 9:30 am according to my system, I entered 13-Mar-09 as FINISH_DATE.
    But it returned false with an error message: "Finish date cannot be greater than system date."
    I changed my system time as 13-Mar-09, 9:30 pm. Then it accepted 13-Mar-09 as FINISH_DATE.
    How can I solve this issue.
    Would appreciate your help.
    Thanks,
    Guy

    Hi Arie,
    Thanks for the code.
    Your code works perfect in SQL Commands.
    But I don't know how to use the code in my application.
    Would appreciate if you can help me know the followings:
    - How to define two application processes -- before header and after submit (before any processing) – with the proper alter session statement.
    - How to use the APEX VPD field to do the same.
    FYI, I use the following codes:
    - For file upload
    If (:p2_SUBMIT_FILE is not null) then
    insert into PM_DOCUMENT (id, name, blob_content, mime_type, PROJECT_NAME, SUBMIT_TIME, SUBMITTED_BY)
    select id, :p2_SUBMIT_FILE, blob_content, mime_type, :P2_NAME, SYSDATE , :P2_UPDATED_BY
    from apex_application_files
    where NAME = :p2_SUBMIT_FILE;
    Delete from apex_application_files where name = :p2_SUBMIT_FILE;
    end if;
    - For Data entry validation
    IF :P2_START_DATE > :P2_FINISH_DATE
    OR :P2_START_DATE > :P2_TARGET_DATE
    OR :P2_FINISH_DATE > SYSDATE THEN
    return false;
    else
    return true;
    end if;
    Thanks,
    Guy

  • Restoring Ipod - will it solve the problems with Itunes 9?

    Does anybody know if restoring the ipod will allow it to sync again? I have had connection problems since 'upgrading' to Itunes 9.
    I don't want to wipe my ipod, only to be unable to put anything back on, and be left with nothing!

    I have an 80G iPod Classic completely out of warranty. Unfortunately everything has been fine with my ipod up until yesterday when I updated itunes to its latest version... Now my ipod constantly crashes and if I can manage to get itunes to recognize it the songs stay on just long enough for me to unplug then loose it all again.
    Do you believe my ipod is done for good, or maybe just until Apple puts out another version?

  • My MacBook pro stop working and it shows folder with question mark after this update,  it's not my fault,  Apple should solve the problem with out ask me to make payment

    After updating my MacBook pro it shows only a folder with question mark on it
    It is not my fault, Apple updates problem
    They should solve it fir me without make any payment
    Thanks

    Try starting your computer holding down the option key as soon as you hear the startup sound, and continue holding it. Hopefully, you will see the icon for your startup disk come up on your screen within a minute. Click on that icon and press return. If your machine starts up normally from there, go to System Preferences > Startup Disk and reselect your startup volume

  • Has anyone solved the problem with updating apps initially purchased with a different account?

    Just wondering if there was any hope that this bug would be fixed... Specifically, you cannot change the AppleID associated with an app...so when you try and update an app (even a free one), you can't if it was purchased using a different apple id from your current apple id. I have 54 apps that cannot be updated!

    No. It was designed to work that way.
    Allan

Maybe you are looking for

  • Slow printing - Brother MFC-8890DW

    I have a Brother MFC-8890DW, which is very economical in terms of supply. But since I got the printer to print the cups (with default installation, and driver provided by arch linux) is very slow, especially in PDFs and images. Investigating a bit, I

  • Top clipped when I import a wmv video.  Please Help.

    When I import a wmv video into premier elements 9 the top part of the video is clipped.  The video plays fine externally with windows player, and plays in premier but the top is clipped.  This happens for any video I try to import.  The video propert

  • Feature request: Showing Program change # in addition to Patch & Set names

    Right now, MS2 is pretty much designed to step forward and backward through patches and sets. Although you do assign program change numbers to each patch and you can set a text box on screen to display the program number once you have selected the pa

  • How to access objects

    Hi, I have a class named for example X. in this class i have instanciated some objects of type Y that their number is not fixed. how is it possible to invoke the particular method of these objects at runtime.

  • 7.0.4 wallpaper resize problem.

    I'm trying to add new wallpaper to my iPad after downloading OS 7.0.4. Trouble is that I can't downsize the image. I've tried to use some of the workarounds but have been unsuccessful. Can someone at Apple please address this issue?