[SOLVED] Upgrading after four month (version `GLIBC_2.16' not found)

Hi all!
After some time I decide to upgrade and starting with read the manual at the site.
Firstly, I run
pacman -Syu --ignore glibc,curl
this exit successfully
Secondly,
pacman -Su
but this give me error
pacman: /lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libarchive.so.12)
pacman always return this error, so I don't install glibc manually
help me, pls
i tried to untar glibc-2.16.0-4
tar -xvf glibc-2.16.0-4-i686.pkg.tar.xz -C /
it exit with
tar: lib: Cannot create symlink to `usr/lib': File exists
tar: lib64: Cannot create symlink to `usr/lib': File exists
tar: Exiting with failure status due to previous errors
ok, glibc untared(symlinks created with my hands in ramfs mode), but nothing happens (only kdm not start, but startx works) and error while i'm trying to use pacman is same
pacman: /lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libarchive.so.12)
Last edited by tim91 (2012-09-29 15:36:07)

jfnichols wrote:tim, can you explain more how you re-installed pacman? I am having this same issue
This is an old thread, but https://bbs.archlinux.org/viewtopic.php … 8#p1044458

Similar Messages

[solved] libc.so.6 version GLIBC_2.16 not found

i have tried to upgrade arch today, and i am getting too deep,
im stilll getting error message
pacman: /lib/libc.so.6 version GLIBC_2.16 not found (required by /usr/lib/libcurl.so.4)
i followed the instructions here https://wiki.archlinux.org/index.php/De … iki:usrlib and am not getting anywhere. i am following the instructions here https://bbs.archlinux.org/viewtopic.php?pid=1144268 and im also not getting anywhere with this.
i did untar the package curl-7.26.0-1-x86_64.pkg.tar.xz from cache and tried to overwrite teh curl libs in /usr/lib and im still getting this error. previously i ignored the unresolvable dependencies which i now feel is a mistake, the list is quite long, heres an example
warning: ignoring package glibc-2.16.0-2
warning: cannot resolve "glibc>=2.16", a dependency of "gcc-libs"
:: The following packages cannot be upgraded due to unresolvable dependencies:
binutils gcc gcc-libs
Do you want to skip the above packages for this upgrade [y/N]
and the actual ones i ignored that i still have to upgrade because they have been ignored are as follows
pacman -Sd binutils dbus dbus-core gcc gcc-libs ghostscript glib2 glibmm gnutls grep gtk2 icu initscripts libcups libgl linux mesa mkinitcpio pcre php php-apache php-gd php-mcrypt php-pear phpmyadmin samba systemd-tools
im going to stop here until i get some assistance if possible before i break anything. i do have my original curl libs backed up to /tmp/pacman_build/usr directory
where to go from here?
Last edited by wolfdogg (2012-08-12 06:45:49)

okay so here's the output of the command:
error: cannot determine ownership of directory '/lib'
/lib/libnss_files-2.15.so is owned by glibc 2.15-12
/lib/libnss_db.so.2 is owned by glibc 2.15-12
/lib/libresolv.so.2 is owned by glibc 2.15-12
/lib/libutil.so.1 is owned by glibc 2.15-12
/lib/libc.so.6 is owned by glibc 2.15-12
/lib/libnss_nis-2.15.so is owned by glibc 2.15-12
/lib/libmemusage.so is owned by glibc 2.15-12
/lib/libBrokenLocale-2.15.so is owned by glibc 2.15-12
/lib/ld-linux.so.2 is owned by glibc 2.15-12
/lib/libnss_hesiod-2.15.so is owned by glibc 2.15-12
/lib/libSegFault.so is owned by glibc 2.15-12
/lib/libcrypt-2.15.so is owned by glibc 2.15-12
/lib/libnss_nisplus.so.2 is owned by glibc 2.15-12
/lib/libnsl-2.15.so is owned by glibc 2.15-12
/lib/libpthread-2.15.so is owned by glibc 2.15-12
/lib/libm-2.15.so is owned by glibc 2.15-12
/lib/libdl.so.2 is owned by glibc 2.15-12
/lib/ld-2.15.so is owned by glibc 2.15-12
/lib/libcidn-2.15.so is owned by glibc 2.15-12
/lib/libnss_files.so.2 is owned by glibc 2.15-12
/lib/libnss_nis.so.2 is owned by glibc 2.15-12
/lib/libresolv-2.15.so is owned by glibc 2.15-12
/lib/librt.so.1 is owned by glibc 2.15-12
/lib/libnss_compat-2.15.so is owned by glibc 2.15-12
/lib/libpcprofile.so is owned by glibc 2.15-12
/lib/libcidn.so.1 is owned by glibc 2.15-12
/lib/libnss_hesiod.so.2 is owned by glibc 2.15-12
/lib/libnss_db-2.15.so is owned by glibc 2.15-12
/lib/libdl-2.15.so is owned by glibc 2.15-12
/lib/libthread_db.so.1 is owned by glibc 2.15-12
/lib/libpthread.so.0 is owned by glibc 2.15-12
/lib/libnss_nisplus-2.15.so is owned by glibc 2.15-12
/lib/libm.so.6 is owned by glibc 2.15-12
/lib/libthread_db-1.0.so is owned by glibc 2.15-12
/lib/libnss_dns-2.15.so is owned by glibc 2.15-12
/lib/librt-2.15.so is owned by glibc 2.15-12
/lib/libutil-2.15.so is owned by glibc 2.15-12
/lib/libBrokenLocale.so.1 is owned by glibc 2.15-12
/lib/libc-2.15.so is owned by glibc 2.15-12
/lib/libcrypt.so.1 is owned by glibc 2.15-12
/lib/libanl.so.1 is owned by glibc 2.15-12
error: cannot determine ownership of directory '/lib/modules'
error: cannot determine ownership of directory '/lib/modules/3.1.9-2-ARCH'
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ccwmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ofmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ieee1394map
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.pcimap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.inputmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.usbmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.seriomap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.isapnpmap
error: cannot determine ownership of directory '/lib/modules/extramodules-3.2-ARCH'
error: cannot determine ownership of directory '/lib/modules/extramodules-3.2-ARCH/kernel'
error: cannot determine ownership of directory '/lib/modules/extramodules-3.2-ARCH/kernel/oss'
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_hdaudio.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_via97.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_cmpci.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_ali5455.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_envy24.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_imux.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_audiopci.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_midimix.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_ich.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_madi.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_solo.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_digi96.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_emu10k1x.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_midiloop.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/osscore.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_cs4281.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_envy24ht.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_cs461x.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_audioloop.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_via823x.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_trident.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_sbpci.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_geode.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_cmi878x.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_atiaudio.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_fmedia.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_sbxfi.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_ymf7xx.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_usb.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_audigyls.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_sblive.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_userdev.ko
/lib/libanl-2.15.so is owned by glibc 2.15-12
/lib/libnss_compat.so.2 is owned by glibc 2.15-12
/lib/libnsl.so.1 is owned by glibc 2.15-12
/lib/libnss_dns.so.2 is owned by glibc 2.15-12
if you say "have a look in /lib yourself if there are any leftover files or directories" then what files exactly do you mean? those who are still owned by glibc? and how do I move them properly (or is this already described in the wiki)?

Libc.so.6: version `GLIBC_2.16' not found

Hey everyone,
I haven't used my Arch system for some months now, thus I had to go through the updating marathon with all these issues.
I've read threads on the forums, guides and asked google for help. I think that I'm close to the finish line. But now I get this error message when using pacman:
pacman: /lib/libc.so.6: version `GLIBC_2.16' not found (required by /lib/libarchive.so.12)
I probably messed something up.
In this thread someone had a similar problem and was able to solve it, but he had to struggle with "libcurl.so.4" instead of "libarchive.so.12". So his "workaround" for the curl package is to no avail for me. How can I find out what package is affected by "libarchive.so.12"? And can I use a similar workaround?
Any help is greatly appreciated!
best regards
Webmaniac

I've installed Arch on a Raid0. When I try to enable the raid ("dmraid -ay") with the live cd, I get:
[...]stripe:Couldn't parse stripe destination
RAID set "isw_..._Volume0" was not detected
ERROR: device "isw_..._Volume0" could not be found'
Can't fix it.
Is there any way that I can use pacstrap from an existing Ubuntu install? I could enable my raid with Ubuntu and then use pacstrap to fix my arch install, couldn't I?

Version `GLIBC_2.12' not found

Hi,
I recently installed arch for the 1st time with Apache, PHP and MySQL.
When I try to install postfix, already in the 1st phase, I get an error. Any help would be greatly appreciated!
Below is what I get. Apparently GLIBC_2.12 is not installed. How do I resolve this issue?
Thank you,
TC
# pacman -Sy postfix
:: Synchronizing package databases...
core 35.4K 300.4K/s 00:00:00 [######################] 100%
extra 454.6K 1272.4K/s 00:00:00 [######################] 100%
community 384.9K 1225.5K/s 00:00:00 [######################] 100%
warning: postfix-2.7.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): postfix-2.7.1-1
Total Download Size: 0.00 MB
Total Installed Size: 8.58 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [##############################] 100%
(1/1) upgrading postfix [##############################] 100%
usermod: no changes
newaliases: /lib/libc.so.6: version `GLIBC_2.12' not found (required by /usr/lib/libldap-2.4.so .2)
error: command failed to execute correctly

tc wrote:Stuff
It's generally a bad idea to -Sy foobar
Last edited by Mr.Elendig (2010-08-29 11:44:47)

[Solved] Upgraded, can't connect to internet, nl80211 not found.

So after an upgraded I enthusiastically rebooted my computer to find that now I can't connect to the internet.
My technique was that I had manually set up a wpa_supplicant configuration with wlp4s0 as my interface, and had
dhcpcd wlp4s0
run on boot.
Now however, this won't connect automatically so I tried running that command and got
wlp4s0: interface not found or invalid
So I thought okay, maybe the interface changed I'll check, so I ran
iw dev
but that simply spits out
nl80211 not found.
iwconfig gives a similar response with
lo no wireless extensions
So I thought perhaps my wireless drivers are no longer working, but when I run lspci it still picks up my card as
Network controller: Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01)
so I guess not.
Netctl and wifi-menu also don't work.
What should I do?
Last edited by FoxzTrot (2014-02-23 22:51:18)

Ah, well thank you for helping me realize that there is something horribly wrong with how I've set up /boot. I have it on a separate partition that I've apparently not been booting from.
Edit to avoid double post: So I unmounted my /boot partition. And then ran pacman -S linux to reinstall it to the /boot directory I was actually starting from, and now everything works! Thanks!
Last edited by FoxzTrot (2014-02-23 22:50:26)

[SOLVED] Upgrade hard drive: Grub error 22: Partition not found

I'm trying to move to a different hard drive. I booted a live cd, created the partitions, formatted, and used "cp -a" to copy all the files over. I also updated the fstab on the new drive, and now I would expect everything to work. However, I can't get past grub.
When I boot up, I get "grub error 22: partition not found".
Here is my setup ("Arch Linux - SSD" is the entry not working):
menu.lst:
# (0) Arch Linux
title Arch Linux
root (hd0,6)
kernel /boot/vmlinuz26 root=/dev/sda7 ro vga=775
initrd /boot/kernel26.img
# (0) Arch Linux
title Arch Linux - SSD
root (hd1,2)
kernel /boot/vmlinuz26 root=/dev/sdb3 ro vga=775
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,6)
kernel /boot/vmlinuz26 root=/dev/sda7 ro
initrd /boot/kernel26-fallback.img
cat /boot/grub/device.map
(fd0) /dev/fd0
(hd0) /dev/sda
(hd1) /dev/sdb
(hd2) /dev/sdc
fdisk -l
Disk /dev/sdb: 115.0 GB, 115033153536 bytes
255 heads, 63 sectors/track, 13985 cylinders, total 224674128 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000d1ddc
Device Boot Start End Blocks Id System
/dev/sdb1 2048 8194047 4096000 82 Linux swap / Solaris
/dev/sdb2 8194048 161794047 76800000 83 Linux
/dev/sdb3 161794048 224673791 31439872 83 Linux
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x152104b0
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 771975167 385986560 7 HPFS/NTFS/exFAT
/dev/sda2 771987510 976768064 102390277+ 5 Extended
/dev/sda5 968350068 976768064 4208998+ 82 Linux swap / Solaris
/dev/sda6 813933288 968350004 77208358+ 83 Linux
/dev/sda7 771987573 813933224 20972826 83 Linux
Another note, is that grub-install takes a very long time to run after I update the menu.lst (5+ minutes), but the update does work without errors, and the new items do appear.
Any help would be appreciated, I'm wondering if I've just been looking at it too long...
Last edited by zhobbs (2011-05-11 19:40:04)

I solved this by using the uuid instead of the root:
# (0) Arch Linux
title Arch Linux - SSD
uuid 128a4425-c9ae-433f-b604-5488d55a14b3
kernel /boot/vmlinuz26 root=/dev/sdb3 ro vga=775
initrd /boot/kernel26.img
Also, I got "grub-install" to run much faster by removing the fd0 from the device map.

Libc.so.6 GLIBC_2.16 not found after attempting to upgrade pacman

Ok so I followed the thread (https://bbs.archlinux.org/viewtopic.php?id=95007&p=1) as best I could and ended with this error:
/lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libcurl.so.4)
The script I used is:
GNU nano 2.2.6 File: PacmanFix
#!/bin/bash
arch=x86_64
mirror=ftp://mirror.rit.edu/archlinux
# link to cache (or download) and extract: openssl,libarchive,libfetch,pacman
cd /tmp
for pkg in openssl-1.0.1.c-1 libarchive-3.0.4-2 pacman-4.0.3-3; do
pkgname=${pkg}-${arch}.pkg.tar.xz
if [[ -e /var/cache/pacman/pkg/${pkgname} ]]; then
ln -sf /var/cache/pacman/pkg/${pkgname} .
else
wget ${mirror}/core/os/${arch}/${pkgname} || exit 1
fi
sudo tar -xvpf ${pkgname} -C / --exclude .PKGINFO --exclude .INSTALL || exit 1
done
for pkg in curl-7.28.0-1; do
pkgname=${pkg}-${arch}.pkg.tar.xz
if [[ -e /var/cache/pacman/pkg/${pkgname} ]]; then
ln -sf /var/cache/pacman/pkg/${pkgname} .
else
wget http://arm.konnichi.com/2012/07/26/pool/packages/curl-7.26.0-1-${arch}.pkg.tar.xz || exit 1
fi
sudo tar -xvpf ${pkgname} -C / --exclude .PKGINFO --exclude .INSTALL || exit 1
done
# now reinstall using pacman to update the local pacman db
sudo pacman -Sf openssl libarchive libfetch pacman || exit 1
# now update your system
sudo pacman -Syu
I have found this thread on the problem but so far I have had no luck resolving the issues
https://wiki.archlinux.org/index.php/De … iki:usrlib
I have attempted to use the current version of curl, and curl7.26.0-1
also the pacman -Syu --ignore glibc,curl has not worked.
I am fairly new to Arch linux but am reasonably competent with computers. I have unfortunately inherited the computer and would really like to get it working again.
Thanks for the help!

masteryod wrote:
Walk us through. When and how did you install Arch and when was the last time you did upgrade? I've got hard time to understand you haven't done upgrade since july.
PS What was your previous distro? (I don't want to brag, just tell you some differences between Arch and other "easy" distros)
Ok as I said i unfortunately inherited the computer, so I was not the one to go through the install of Arch.
I have been using the computer without upgrading, but I would really like to get the computer working properly.
The last upgrade was probably performed around a year ago. Please let me know any other specific information that would be useful.

[SOLVED] GLIBC_2.16 not found - Pacman broken

Hi all,
I did a packman -Syu yesterday and following instructions relative to glib errors I also performed it by excluding glibc.
This resulting in the problem that now I have old GLIBC ( so I don't have simlink of lib).
After rebooting my system was unable to boot anymore, I did a chroot and a mkinitcpio -p linux and now I can boot the system.
The main problem is that I can't use pacman and a lot of stuff (samba service, firefox, and so on) due to this error:
pacman: /lib/libc.so.6: version 'GLIBC_2.16' not found (required by /lib/libarchive.so.12)
Before opening this new thread I did a lot of searching and I tried I think almost all solutions I've found.
I already tried to use pacman cache for replacing libs, I already tried to downgrade curl...
Any help is very very very appreciated, It's a workstation I'm using for CFD computation in my lab and I'm totally blocked!!! (I mean, CFD works at least )
Thanks in advance, guys.
daron
Last edited by daron (2012-09-27 16:24:43)

https://wiki.archlinux.org/index.php/De … iki:usrlib
Try this from a chroot : pacman -U http://pkgbuild.com/~allan/glibc-2.16.0 … pkg.tar.xz
If that fails, try extracting the 2.16.0-1 tarball to / (and don't forget to reinstall glibc after you've solved the problem) .

'GLIBC_2.17' not found (required by udevd)

'GLIBC_2.17' not found (required by udevd)
Can anyone help with this please? I'm at my wit's end.
I did pacman -Syu , carefully following the advice at https://wiki.archlinux.org/index.php/De … iki:usrlib.
/lib turned into a symlink to usr/lib as promised - but my system has not booted since, throwing:
udevd: /usr/lib/libc.so.6: version 'GLIBC_2.17' not found (required by udevd) ... and ending up at the recovery shell option.
I burned archlinux-2013.01.04-dual.iso to a CD to try and rescue the situation, and that boots OK. But I can't fix my 'upgraded' system - always coming back to the same problem on reboot.
Can anyone tell me what I did wrong, and how to resurrect my system? - else I might have to go back to Debian!
Thanks.

/lib/libc-2.17.so exists, and /lib/libc.so.6 as a symlink to it:
lrwxrwxrwx 1 root root 12 Dec 26 10:23 /lib/libc.so.6 -> libc-2.17.so
pacman -Qi glibc reports:
Name : glibc
Version : 2.17-1
URL : http://www.gnu.org/software/libc
Licenses : GPL LGPL
Groups : base
Provides : None
Depends On : linux-api-headers>=3.7 tzdata
Optional Deps : None
Required By : a52dec alsa-lib attr babl bash binutils bzip2 cdparanoia cfitsio chmlib convertlit coreutils cracklib device-mapper dhcpcd diffutils dosfstools dotconf eventlog expat faac faad2 fakeroot fftw file findutils fribidi fuse gawk gcc-libs gdbm grep gsl gsm gutenprint gzip hspell hyphen initscripts iproute2 iptables json-c kbd keyutils kmod libasyncns libburn libcap libcap-ng libcdaudio libcddb libdatrie libdiscid libdmtx libdrm libexif libffi libglapi libgpg-error libgssglue libical libice libidn libiodbc libirman libjpeg-turbo libksba libmad libmcrypt libmowgli libnl libnova libogg libpcap libpciaccess libpipeline libraw1394 libsigsegv libtasn1 libusbx libutempter libvpx libwbclient libx86emu libxau libxdmcp libytnef lpsolve lsof m4 make mcpp mdadm mkinitcpio-busybox mtdev ncurses net-tools nspr openal opencore-amr orc p11-kit pacman pam patch pciutils perl pixman popt ppp procmail pth r8168-lts readline recode run-parts sdl sg3_utils sip sudo sysfsutils sysvinit-tools talloc tar tidyhtml util-linux v4l-utils vte-common wavpack which x264 xf86-input-evdev xf86-video-fbdev xf86-video-vesa xorg-sessreg xvidcore zlib
Conflicts With : None
Replaces : None
Installed Size : 38832.00 KiB
Packager : Allan McRae <[email protected]>
Architecture : x86_64
Build Date : Wed Dec 26 10:23:56 2012
Install Date : Mon Jan 21 11:31:54 2013
Install Reason : Explicitly installed
Install Script : Yes
Description : GNU C Library
Last edited by JohnColeman (2013-01-21 14:19:38)

GLIBC_2.3 not found when installing oracle10g on SUSE linux

Hi all,
i am tryring to build a test server of SUSE linux 8 and when installing oracle 10g on the same....i am getting an error
GLIBC_2.3 not found
oracle@testserver:~/database>export DISPLAY=:0.0
oracle@testserver:~/database>./runInstaller
/opt/oracle/database/install/.oui:/lib/libc.so.6: version 'GLIBC_2.3' not found
(required by /opt/oracle/database/install/.oui)
oracle@testserver:~/database>pls suggest me where can i found these rpm i have been tryring to google the same....i have tried on rpmfind.com but not found rpm for suse 8
pls help me...

You should have searched a little bit, but my home server is an OpenSuSE 10.2/64 with Oracle 10g/64, so I will reply:
runInstaller -ignoreSysPrereqsOpenSuSE 10.2/64 works really fine with 10g, installation is straightforward.

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

After four months my Imac hard drive suddenly began making very audible noises. What should I do? audible noises. What should I do?

After four months my Imac hard drive suddenly began making very audible noises. What should I do?

Back up your system, make a Genius Bar appointment and take it in. If it's 4 months old you are still on warranty, let them fix it.

Version GLIBC_2.0 not defined in file libc.so.6

hey all
am trying to install database 9i on readhat 5
installation is done but DBCA NETCA are giving error
/u01/oracle9/jre/1.1.8/bin/../lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
soo how can i solve that please???
i tryed the LD_ASSUME_KERNEL and didnt work also the patch compat-libcwait is installed and is installed and the patch 3006854 is also installed
what can i do????

i tryed the LD_ASSUME_KERNEL Is still your LD_ASSUME_KERNEL set?
Recommended Settings for Installing Oracle Products
O/S
RHEL5, OEL5, SLES10
LD_ASSUME_KERNEL setting
Should not be set
Additionally you can review: Oracle Metalink Document: What should the value of LD_ASSUME_KERNEL be set to for Linux?: Doc ID: Note:377217.1
Adith

[SOLVED] version `HEIMDAL_KRB5_1.0' not found

Why is this happening now?
/opt/xbmc/share/xbmc/xbmc.bin: /usr/lib/libkrb5.so.25: version `HEIMDAL_KRB5_1.0' not found (required by /usr/lib/libsmbclient.so.0)
i did a
$ sudo pacman -Sy heimdal
it's up to date and installed, and i can't get rid of this message
Last edited by beatbreaker (2009-12-08 21:52:04)

Um, I have exact the same problem while starting some deamons (yestarday it was cups, but reinstalling heimdal solved it, today it's ssh), I have no packages ignored in pacman and I don't quite know what to do.
$ sudo /etc/rc.d/sshd start
:: Starting Secure Shell Daemon [BUSY]
/usr/sbin/sshd: /usr/lib/libkrb5.so.25: version `HEIMDAL_KRB5_1.0' not found (required by /usr/sbin/sshd)
[FAIL]
/EDIT: reinstalling openssh solved the problem, but still, I would like to know why pacman didn't upgrade ssh, as he should do this while pacman -Suy
Last edited by martusia (2009-12-14 19:56:10)

[SOLVED]`GLIBC_2.14' not found

I tried to update openssl on an older machine, and now am getting:
"`GLIBC_2.14' not found (required by /usr/lib/libssl.so.1.0.0)"
for various commands including pacman. I have the glibc-2.14.1-1-x86_64.pkg.tar.xz pkg on my machine, but cannot install it. Lots of stuff doesn't work, does anyone know how I can fix this?
thanks,
--charlie
Last edited by cfarinella (2012-04-23 18:57:31)

cfarinella wrote:"`GLIBC_2.14' not found (required by /usr/lib/libssl.so.1.0.0)"
That's strange - sure it doesn't say "2.15"?
You should have recompiled openssl, rather than changed just 2 of its files. That's very unsafe - e.g. what about /usr/lib/engines/*.so?

[SOLVED] Upgrading after four month (version `GLIBC_2.16' not found)

Similar Messages

Maybe you are looking for