[Solved]Virtualbox kernel module not loaded

I update my system today and when I try to run Virtualbox...
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.6.11-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.
I already had this trouble before and this was the fix
# modprobe vboxdrv
But it doesn't work anymore
Any ideas?
Edit: This just get fixed by itself when restaring my PC. Sorry
Last edited by ilq (2013-02-13 02:32:43)

fsckd wrote:
rc.conf is part of the deprecated init system. icebox is not using systemd and neglected to mention that.
Amarildo, see the wiki.
Thanks, it really helped. It's solved.

Similar Messages

  • Kernel modules not loading at boot.

    ~]$ systemctl status systemd-modules-load.service
    systemd-modules-load.service - Load Kernel Modules
    Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
    Active: failed (Result: exit-code) since Tue 2014-03-11 18:34:06 CDT; 4min 53s ago
    Docs: man:systemd-modules-load.service(8)
    man:modules-load.d(5)
    Process: 137 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
    Main PID: 137 (code=exited, status=1/FAILURE)
    Mar 11 18:34:06 arch-m systemd-modules-load[137]: Failed to insert 'vboxguest...
    Mar 11 18:34:06 arch-m systemd-modules-load[137]: Failed to insert 'vboxsf': ...
    Mar 11 18:34:06 arch-m systemd-modules-load[137]: Inserted module 'vboxvideo'
    Mar 11 18:34:06 arch-m systemd-modules-load[137]: Inserted module 'vboxdrv'
    Mar 11 18:34:06 arch-m systemd-modules-load[137]: Inserted module 'vboxnetadp'
    Mar 11 18:34:06 arch-m systemd-modules-load[137]: Failed to find module 'vbox...
    Mar 11 18:34:06 arch-m systemd[1]: systemd-modules-load.service: main proce...RE
    Mar 11 18:34:06 arch-m systemd[1]: Failed to start Load Kernel Modules.
    Mar 11 18:34:06 arch-m systemd[1]: Unit systemd-modules-load.service entere...e.
    Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
    Hint: Some lines were ellipsized, use -l to show in full.
    Does any one know how to fix this? AFter a while it became annoying.

    More importantly, the modules are built for a specific kernel version.  So if the kernel gets updated and the virtualbox modules get overlooked somehow, then they are not going to work.  You can always rebuild them with makepkg and ABS though.

  • Wacom Intuos Pro aka Intuos 5 kernel module not loading

    Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
    % lsusb | grep -i wacom
    Bus 004 Device 003: ID 056a:0315 Wacom Co., Ltd
    % grep -i wacom /proc/bus/input/devices
    % xsetwacom --list devices
    % pacman -Qqs wacom
    libwacom
    wacom-drivers
    wacom-udev
    wacom-utility
    xf86-input-wacom
    Any thoughts?

    hexadecagram wrote:Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
    Are you sure it should work? If you check linuxwacom-announce mailing list, you will see that for your device (Intuos Pro):
    - X11 support is added by xf86-input-wacom 0.23.0
    - configuration support is added in libwacom 0.8
    - kernel support is added in input-wacom 0.19 but isn't in mainline kernel yet - on 28'th Spet Jason said: "We don't yet have support for the  new "Intuos" line, but we expect our next release in six weeks' time to include it."
    I'd say you have to wait for newer kernel, or try installing input-wacom on your own risk (different thing from xf86-input-wacom). Patch for mainline kernel reached Dmitry Torokhov's input tree - but isn't merged with official kernel yet, even 3.12rc5 still does not have those patches.

  • IPMI kernel modules not loading - no ipmi device

    My HP ML110 G5 has a IPMI device that worked but somewhen (I can't say when) it stopped working.
    Proof that they exist in th machine with dmidecode:
    Handle 0x0025, DMI type 38, 18 bytes
    IPMI Device Information
        Interface Type: KCS (Keyboard Control Style)
        Specification Version: 2.0
        I2C Slave Address: 0x10
        NV Storage Device: Not Present
        Base Address: 0x0000000000000CA2 (I/O)
        Register Spacing: Successive Byte Boundaries
    I quite soon found out that the ipmi kernel modules are not loaded so I tried to load them with modprobe:
    modprobe ipmi_msghandler
    modprobe ipmi_devintf
    modprobe ipmi_si
    no error, no response, no modules loaded (check with lsmod).
    There are descriptions (http://en.onoclea.com/bits/hp-microserver-remote-access-card-ipmi-on-linux.html, http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux) how to load the ipmi_si module with manual parameters. Tried, no error, no response, no modules loaded (check with lsmod).

    Zancarius wrote:
    Sounds to me like the firmware for whatever reason isn't being installed in the appropriate location.
    I checked out the PKGBUILD for b43-firmware (which I'm assuming is what you installed), and it appears to be using b43-fwcutter presumably to snag the appropriate files and place them in /usr/lib/firmware:
    # Application
    b43-fwcutter -w ""${pkgdir}"/usr/lib/firmware/" linux/wl_apsta.o
    Does the PKGBUILD generate any errors? Did you check /usr/lib/firmware for the firmware for your wireless? Worst case, you could probably try running b43-fwcutter manually and see what it does. Maybe it has some verbose/debug option you could use, too.
    The firmware is installed to the correct directory and the PKGBUILD doesn't generate any errors. I've tried b43-fwcutter manually as well to no avail. Even if that were the case though it doesn't explain why the new kernel also rejects the usbnet, ath9k, and b44 modules. Basically I'm stuck on this old(ish) kernel until this is fixed if I want any sort of network connectivity.
    Xyne wrote:This is a long shot, but if you have a separate boot partition, check that it is actually mounted. If not, backup/remove the contents /boot, mount the partition and rebuild the kernel image
    I do not have a separate boot partition on this machine. And the mtime of the initramfs images is certainly current.
    Last edited by airencracken (2012-07-22 17:41:56)

  • Kernel modules not loading automatically in 3.10?

    Hello everyone,
    After I've update to 3.10 (I think that that was the problem), my kernel modules seem not to load automatically anymore.
    In the past, programs like efibootmgr and Virtual Box worked without a problem, now I have to manually load the appropriate kernel modules (efivars and vboxdrv, respectively) for the programs to work. I've done a quick check and it looks like I also have this problem on a different machine. Is this normal?
    Thanks!

    Thanks for your responses!
    Yes, updating went fine and I'm now running linux 3.10.5-1 (also rebooted).
    I'm aware that I can load them via modules-load.d, but I though it was neat that everything loaded automatically, and I just was wondering if this is expected behavior. If it is, I would update the wiki and such, but I'm still not sure why they would remove this. (I haven't heard anything about it)
    Do you know of any other modules that I can test? That should be loaded automatically?
    Thanks!

  • [Solved] After upgrading system/VIrtualbox kernels won't load

    After running an update on my system and trying to use Virtualbox I recieve this:
    ============================================================
    WARNING: The vboxdrv kernel module is not loaded. Either there is no module
             available for the current kernel (3.16.4-1-ARCH) or it failed to
             load. Please reinstall the kernel module virtualbox-host-modules or
             if you don't use our stock kernel compile the modules with
               sudo dkms autoinstall
             You will not be able to start VMs until this problem is fixed.
    VBoxHeadless: Error -1908 in suplibOsInit!
    VBoxHeadless: Kernel driver not installed
    VBoxHeadless: Tip! Make sure the kernel module is loaded. It may also help to reinstall VirtualBox.
    ============================================================
    I have tried to reinstall virtualbox and the kernels, I've manually reloaded my kernel modules, and I still have no luck.
    Does anyone have any ideas?
    Last edited by cynicalpsycho (2014-10-25 20:19:22)

    Solution: Reboot system....  *Facepalm*

  • Error When Publishing "no access to internet (internet module not loaded)"

    When publishing a site in GoLive 9 I get the message""no access to internet (internet module not loaded)".
    i've never had this problem before, this just started happening and cant figure out how to get it to work again. it's weird because i can connect to my ftp server from the file menu and the internet module is checked on in my preferences. i've tried creating a new site file for my webpages and reinstalling GoLive and nothing has worked.
    has anybody had the same problem? thx!

    ha, ok i just figured it out. i didn't have the proper ftp setting in the publish preferences. i hadn't changed the info in the "server name" from the place holder text that was automatically inserted. that's a strange error message to display for that!!!

  • Trying to register the VirtualBox kernel modules using DKMS [FAILED]

    Hi,
    I am getting the following error while installing Oracle VirtualBox on OEL 5.2, 64-bit.
    I am able to see Virtual Machine Wizard from "Applications > System Tools > Oracle VM VirtualBox". Can I go ahead and do 11gR2 RAC installation using Oracle VirtualBox ???
    If I need to install DKMS kernel modules please let me know how to do that.
    ====================================================================================
    [root@linux2 OracleVM]# rpm -Uvh VirtualBox-4.1-4.1.18_78361_rhel5-1.x86_64.rpm
    warning: VirtualBox-4.1-4.1.18_78361_rhel5-1.x86_64.rpm: Header V4 DSA signature: NOKEY, key ID 98ab5139
    Preparing... ########################################### [100%]
    1:VirtualBox-4.1 ########################################### [100%]
    Creating group 'vboxusers'. VM users must be member of that group!
    No precompiled module for this kernel found -- trying to build one. Messages
    emitted during module compilation will be logged to /var/log/vbox-install.log.
    Stopping VirtualBox kernel modules [ OK ]
    Uninstalling old VirtualBox DKMS kernel modules [ OK ]
    Trying to register the VirtualBox kernel modules using DKMS [FAILED]
    (Failed, trying without DKMS)
    Recompiling VirtualBox kernel modules [ OK ]
    Starting VirtualBox kernel modules [ OK ]
    ====================================================================================
    Thanks.
    -Joy.

    And this relates to RAC, ASM, and Clusterware installation in what way?
    Please lock this thread and open one in the appropriate forum. Thanks.

  • [SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

    Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
    many modules such as wifi or psmouse are not loaded.
    My PC is Asus Zenbook UX31E.
    If I do by hand like
    # modprobe ath9k
    # modprobe psmouse
    wifi and psmouse are OK,
    but I want to set all necessary modules auto loaded.
    * Output of lsmod of linux 3.9.5-1 was 87 rows
    but lsmod of 3.11.6 (I attache below) is only 39 rows.
    * Both
    /etc/modprobe.d/
    /etc/modules-load.d/
    are empty on 3.9.5-1 and 3.11.6.
    Please give me advice, thx.
    Last edited by taro (2014-01-08 11:20:46)

    Thx. The version numbers seem to be identical.
    % uname -a                                                              [~]
    Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
    % pacman -Qi linux                                                      [~]
    Name           : linux
    Version        : 3.11.6-1
    Description    : The Linux kernel and modules
    Architecture   : x86_64
    URL            : http://www.kernel.org/
    Licenses       : GPL2
    Groups         : base
    Provides       : kernel26=3.11.6
    Depends On     : coreutils  linux-firmware  kmod  mkinitcpio>=0.7
    Optional Deps  : crda: to set the correct wireless channels of your country
    Required By    : None
    Optional For   : None
    Conflicts With : kernel26
    Replaces       : kernel26
    Installed Size : 64493.00 KiB
    Packager       : Thomas Bächler <[email protected]>
    Build Date     : Sat 19 Oct 2013 06:25:12 AM JST
    Install Date   : Fri 08 Nov 2013 12:06:17 PM JST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By   : None
    best regards.

  • [SOLVED]VirtualBox Bridged mode not working

    For some reason I am unable to start a virtual machine in host-only or bridged mode.  I can do NAT mode but that doesn't really suit what I want to do very well.  Here is the message I get when trying bridged mode.
    Failed to start the virtual machine Windows XP.
    Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
    One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older verison of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root
    (VERR_SUPDRV_COMPONENT_NOT_FOUND).
    I can't run /etc/init.d/vboxdrv because it doesn't exist.  I installed Vbox via Pacman and I'm embarassed to admit I don't really know where it is.  I just launch it by right clicking on my desktop (using fluxbox).
    Any ideas on where to go next?
    also here are my vbox logs
    00:00:00.534 VirtualBox 3.0.10_OSE r54097 linux.x86 (Nov 1 2009 19:44:00) release log
    00:00:00.534 Log opened 2009-12-01T18:11:07.107676000Z
    00:00:00.535 OS Product: Linux
    00:00:00.535 OS Release: 2.6.30-ARCH
    00:00:00.535 OS Version: #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009
    00:00:00.535 Host RAM: 1956MB RAM, available: 1801MB
    00:00:00.535 Executable: /usr/lib/virtualbox/VirtualBox
    00:00:00.535 Process ID: 1818
    00:00:00.535 Package type: LINUX_32BITS_GENERIC (OSE)
    00:00:00.579 SUP: Loaded VMMR0.r0 (/usr/lib/virtualbox/VMMR0.r0) at 0xf9119060 - ModuleInit at 00000000f912c340 and ModuleTerm at 00000000f912c300
    00:00:00.579 SUP: VMMR0EntryEx located at 00000000f912c1e0, VMMR0EntryFast at 00000000f912b530 and VMMR0EntryInt at 00000000f912b350
    00:00:00.638 VBoxSharedClipboard mode: Bidirectional
    00:00:00.739 ************************* CFGM dump *************************
    00:00:00.746 pRoot=08bd5490:{/}
    00:00:00.746 [/] (level 0)
    00:00:00.746 Name <string> = "Windows XP" (cch=11)
    00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
    00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
    00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
    00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
    00:00:00.746 TimerMillies <integer> = 0x000000000000000a (10)
    00:00:00.746 RawR3Enabled <integer> = 0x0000000000000001 (1)
    00:00:00.746 RawR0Enabled <integer> = 0x0000000000000001 (1)
    00:00:00.746 PATMEnabled <integer> = 0x0000000000000001 (1)
    00:00:00.746 CSAMEnabled <integer> = 0x0000000000000001 (1)
    00:00:00.746 HwVirtExtForced <integer> = 0x0000000000000000 (0)
    00:00:00.746 EnableNestedPaging <integer> = 0x0000000000000000 (0)
    00:00:00.746 EnableVPID <integer> = 0x0000000000000000 (0)
    00:00:00.746 EnablePAE <integer> = 0x0000000000000000 (0)
    00:00:00.746
    00:00:00.746 [/HWVirtExt/] (level 1)
    00:00:00.746 Enabled <integer> = 0x0000000000000001 (1)
    00:00:00.746 64bitEnabled <integer> = 0x0000000000000000 (0)
    00:00:00.746
    00:00:00.746 [/PDM/] (level 1)
    00:00:00.746
    00:00:00.746 [/PDM/Drivers/] (level 2)
    00:00:00.746
    00:00:00.746 [/PDM/Drivers/VBoxC/] (level 3)
    00:00:00.746 Path <string> = "/usr/lib/virtualbox/components/VBoxC" (cch=37)
    00:00:00.746
    00:00:00.746 [/Devices/] (level 1)
    00:00:00.746
    00:00:00.746 [/Devices/pcarch/] (level 2)
    00:00:00.746
    00:00:00.746 [/Devices/pcarch/0/] (level 3)
    00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.746
    00:00:00.746 [/Devices/pcarch/0/Config/] (level 4)
    00:00:00.746
    00:00:00.746 [/Devices/pcbios/] (level 2)
    00:00:00.746
    00:00:00.746 [/Devices/pcbios/0/] (level 3)
    00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.746
    00:00:00.746 [/Devices/pcbios/0/Config/] (level 4)
    00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
    00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
    00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
    00:00:00.746 HardDiskDevice <string> = "piix3ide" (cch=9)
    00:00:00.746 FloppyDevice <string> = "i82078" (cch=7)
    00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
    00:00:00.746 PXEDebug <integer> = 0x0000000000000000 (0)
    00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
    00:00:00.746 BootDevice0 <string> = "FLOPPY" (cch=7)
    00:00:00.746 BootDevice1 <string> = "DVD" (cch=4)
    00:00:00.746 BootDevice2 <string> = "IDE" (cch=4)
    00:00:00.746 BootDevice3 <string> = "NONE" (cch=5)
    00:00:00.746
    00:00:00.746 [/Devices/8237A/] (level 2)
    00:00:00.746
    00:00:00.746 [/Devices/8237A/0/] (level 3)
    00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.746
    00:00:00.746 [/Devices/pci/] (level 2)
    00:00:00.746
    00:00:00.746 [/Devices/pci/0/] (level 3)
    00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.746
    00:00:00.746 [/Devices/pci/0/Config/] (level 4)
    00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
    00:00:00.746
    00:00:00.746 [/Devices/pckbd/] (level 2)
    00:00:00.746
    00:00:00.746 [/Devices/pckbd/0/] (level 3)
    00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.746
    00:00:00.746 [/Devices/pckbd/0/Config/] (level 4)
    00:00:00.746
    00:00:00.746 [/Devices/pckbd/0/LUN#0/] (level 4)
    00:00:00.746 Driver <string> = "KeyboardQueue" (cch=14)
    00:00:00.746
    00:00:00.746 [/Devices/pckbd/0/LUN#0/Config/] (level 5)
    00:00:00.746 QueueSize <integer> = 0x0000000000000040 (64)
    00:00:00.746
    00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/] (level 5)
    00:00:00.746 Driver <string> = "MainKeyboard" (cch=13)
    00:00:00.746
    00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/Config/] (level 6)
    00:00:00.747 Object <integer> = 0x0000000008bbb510 (146519312)
    00:00:00.747
    00:00:00.747 [/Devices/pckbd/0/LUN#1/] (level 4)
    00:00:00.747 Driver <string> = "MouseQueue" (cch=11)
    00:00:00.747
    00:00:00.747 [/Devices/pckbd/0/LUN#1/Config/] (level 5)
    00:00:00.747 QueueSize <integer> = 0x0000000000000080 (128)
    00:00:00.747
    00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/] (level 5)
    00:00:00.747 Driver <string> = "MainMouse" (cch=10)
    00:00:00.747
    00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/Config/] (level 6)
    00:00:00.747 Object <integer> = 0x0000000008bbb5e8 (146519528)
    00:00:00.747
    00:00:00.747 [/Devices/i82078/] (level 2)
    00:00:00.747
    00:00:00.747 [/Devices/i82078/0/] (level 3)
    00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.747
    00:00:00.747 [/Devices/i82078/0/Config/] (level 4)
    00:00:00.747 IRQ <integer> = 0x0000000000000006 (6)
    00:00:00.747 DMA <integer> = 0x0000000000000002 (2)
    00:00:00.747 MemMapped <integer> = 0x0000000000000000 (0)
    00:00:00.747 IOBase <integer> = 0x00000000000003f0 (1008)
    00:00:00.747
    00:00:00.747 [/Devices/i82078/0/LUN#999/] (level 4)
    00:00:00.747 Driver <string> = "MainStatus" (cch=11)
    00:00:00.747
    00:00:00.747 [/Devices/i82078/0/LUN#999/Config/] (level 5)
    00:00:00.747 papLeds <integer> = 0x0000000008bbafc4 (146517956)
    00:00:00.747 First <integer> = 0x0000000000000000 (0)
    00:00:00.747 Last <integer> = 0x0000000000000000 (0)
    00:00:00.747
    00:00:00.747 [/Devices/i82078/0/LUN#0/] (level 4)
    00:00:00.747 Driver <string> = "Block" (cch=6)
    00:00:00.747
    00:00:00.747 [/Devices/i82078/0/LUN#0/Config/] (level 5)
    00:00:00.747 Type <string> = "Floppy 1.44" (cch=12)
    00:00:00.747 Mountable <integer> = 0x0000000000000001 (1)
    00:00:00.747
    00:00:00.747 [/Devices/acpi/] (level 2)
    00:00:00.747
    00:00:00.747 [/Devices/acpi/0/] (level 3)
    00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.747 PCIDeviceNo <integer> = 0x0000000000000007 (7)
    00:00:00.747 PCIFunctionNo <integer> = 0x0000000000000000 (0)
    00:00:00.747
    00:00:00.747 [/Devices/acpi/0/Config/] (level 4)
    00:00:00.747 RamSize <integer> = 0x0000000010000000 (268435456)
    00:00:00.747 RamHoleSize <integer> = 0x0000000020000000 (536870912)
    00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
    00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
    00:00:00.747 FdcEnabled <integer> = 0x0000000000000001 (1)
    00:00:00.747 ShowRtc <integer> = 0x0000000000000000 (0)
    00:00:00.747 ShowCpu <integer> = 0x0000000000000000 (0)
    00:00:00.747
    00:00:00.747 [/Devices/acpi/0/LUN#0/] (level 4)
    00:00:00.747 Driver <string> = "ACPIHost" (cch=9)
    00:00:00.747
    00:00:00.747 [/Devices/acpi/0/LUN#0/Config/] (level 5)
    00:00:00.747
    00:00:00.747 [/Devices/i8254/] (level 2)
    00:00:00.747
    00:00:00.747 [/Devices/i8254/0/] (level 3)
    00:00:00.747
    00:00:00.747 [/Devices/i8254/0/Config/] (level 4)
    00:00:00.747
    00:00:00.747 [/Devices/i8259/] (level 2)
    00:00:00.747
    00:00:00.747 [/Devices/i8259/0/] (level 3)
    00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.747
    00:00:00.747 [/Devices/i8259/0/Config/] (level 4)
    00:00:00.747
    00:00:00.747 [/Devices/apic/] (level 2)
    00:00:00.747
    00:00:00.747 [/Devices/apic/0/] (level 3)
    00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.747
    00:00:00.747 [/Devices/apic/0/Config/] (level 4)
    00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
    00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
    00:00:00.747
    00:00:00.747 [/Devices/mc146818/] (level 2)
    00:00:00.747
    00:00:00.747 [/Devices/mc146818/0/] (level 3)
    00:00:00.747
    00:00:00.747 [/Devices/mc146818/0/Config/] (level 4)
    00:00:00.747
    00:00:00.747 [/Devices/vga/] (level 2)
    00:00:00.747
    00:00:00.747 [/Devices/vga/0/] (level 3)
    00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000002 (2)
    00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
    00:00:00.748
    00:00:00.748 [/Devices/vga/0/Config/] (level 4)
    00:00:00.748 VRamSize <integer> = 0x0000000003c00000 (62914560)
    00:00:00.748 FadeIn <integer> = 0x0000000000000001 (1)
    00:00:00.748 FadeOut <integer> = 0x0000000000000001 (1)
    00:00:00.748 LogoTime <integer> = 0x0000000000000000 (0)
    00:00:00.748 LogoFile <string> = "" (cch=1)
    00:00:00.748 ShowBootMenu <integer> = 0x0000000000000002 (2)
    00:00:00.748 CustomVideoModes <integer> = 0x0000000000000000 (0)
    00:00:00.748 HeightReduction <integer> = 0x0000000000000000 (0)
    00:00:00.748
    00:00:00.748 [/Devices/vga/0/LUN#0/] (level 4)
    00:00:00.748 Driver <string> = "MainDisplay" (cch=12)
    00:00:00.748
    00:00:00.748 [/Devices/vga/0/LUN#0/Config/] (level 5)
    00:00:00.748 Object <integer> = 0x0000000008bbb6c8 (146519752)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/] (level 2)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/] (level 3)
    00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000001 (1)
    00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000001 (1)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/Config/] (level 4)
    00:00:00.748 Type <string> = "PIIX4" (cch=6)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/LUN#999/] (level 4)
    00:00:00.748 Driver <string> = "MainStatus" (cch=11)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/LUN#999/Config/] (level 5)
    00:00:00.748 papLeds <integer> = 0x0000000008bbafcc (146517964)
    00:00:00.748 First <integer> = 0x0000000000000000 (0)
    00:00:00.748 Last <integer> = 0x0000000000000003 (3)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/LUN#2/] (level 4)
    00:00:00.748 Driver <string> = "Block" (cch=6)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/LUN#2/Config/] (level 5)
    00:00:00.748 Type <string> = "DVD" (cch=4)
    00:00:00.748 Mountable <integer> = 0x0000000000000001 (1)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/LUN#0/] (level 4)
    00:00:00.748 Driver <string> = "Block" (cch=6)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/LUN#0/Config/] (level 5)
    00:00:00.748 Type <string> = "HardDisk" (cch=9)
    00:00:00.748 Mountable <integer> = 0x0000000000000000 (0)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/] (level 5)
    00:00:00.748 Driver <string> = "VD" (cch=3)
    00:00:00.748
    00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/Config/] (level 6)
    00:00:00.748 Path <string> = "/home/royce/.VirtualBox/HardDisks/Windows XP.vdi" (cch=49)
    00:00:00.748 Format <string> = "VDI" (cch=4)
    00:00:00.748
    00:00:00.748 [/Devices/pcnet/] (level 2)
    00:00:00.748
    00:00:00.748 [/Devices/pcnet/0/] (level 3)
    00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000003 (3)
    00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
    00:00:00.748
    00:00:00.748 [/Devices/pcnet/0/Config/] (level 4)
    00:00:00.748 Am79C973 <integer> = 0x0000000000000001 (1)
    00:00:00.748 MAC <bytes> = "08 00 27 bb 10 02" (cb=6)
    00:00:00.748 CableConnected <integer> = 0x0000000000000000 (0)
    00:00:00.748 LineSpeed <integer> = 0x0000000000000000 (0)
    00:00:00.748
    00:00:00.748 [/Devices/pcnet/0/LUN#999/] (level 4)
    00:00:00.748 Driver <string> = "MainStatus" (cch=11)
    00:00:00.748
    00:00:00.748 [/Devices/pcnet/0/LUN#999/Config/] (level 5)
    00:00:00.748 papLeds <integer> = 0x0000000008bbb094 (146518164)
    00:00:00.749
    00:00:00.749 [/Devices/pcnet/0/LUN#0/] (level 4)
    00:00:00.749 Driver <string> = "IntNet" (cch=7)
    00:00:00.749
    00:00:00.749 [/Devices/pcnet/0/LUN#0/Config/] (level 5)
    00:00:00.749 Trunk <string> = "wlan0" (cch=6)
    00:00:00.749 TrunkType <integer> = 0x0000000000000003 (3)
    00:00:00.749 Network <string> = "HostInterfaceNetworking-wlan0" (cch=30)
    00:00:00.749 SharedMacOnWire <integer> = 0x0000000000000001 (1)
    00:00:00.749
    00:00:00.749 [/Devices/e1000/] (level 2)
    00:00:00.749
    00:00:00.749 [/Devices/serial/] (level 2)
    00:00:00.749
    00:00:00.749 [/Devices/parallel/] (level 2)
    00:00:00.749
    00:00:00.749 [/Devices/VMMDev/] (level 2)
    00:00:00.749
    00:00:00.749 [/Devices/VMMDev/0/] (level 3)
    00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000004 (4)
    00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
    00:00:00.749
    00:00:00.749 [/Devices/VMMDev/0/Config/] (level 4)
    00:00:00.749
    00:00:00.749 [/Devices/VMMDev/0/LUN#0/] (level 4)
    00:00:00.749 Driver <string> = "MainVMMDev" (cch=11)
    00:00:00.749
    00:00:00.749 [/Devices/VMMDev/0/LUN#0/Config/] (level 5)
    00:00:00.749 Object <integer> = 0x0000000008bbbac0 (146520768)
    00:00:00.749
    00:00:00.749 [/Devices/VMMDev/0/LUN#999/] (level 4)
    00:00:00.749 Driver <string> = "MainStatus" (cch=11)
    00:00:00.749
    00:00:00.749 [/Devices/VMMDev/0/LUN#999/Config/] (level 5)
    00:00:00.749 papLeds <integer> = 0x0000000008bbb0b4 (146518196)
    00:00:00.749 First <integer> = 0x0000000000000000 (0)
    00:00:00.749 Last <integer> = 0x0000000000000000 (0)
    00:00:00.749
    00:00:00.749 [/Devices/AudioSniffer/] (level 2)
    00:00:00.749
    00:00:00.749 [/Devices/AudioSniffer/0/] (level 3)
    00:00:00.749
    00:00:00.749 [/Devices/AudioSniffer/0/Config/] (level 4)
    00:00:00.749
    00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
    00:00:00.749 Driver <string> = "MainAudioSniffer" (cch=17)
    00:00:00.749
    00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
    00:00:00.749 Object <integer> = 0x0000000008bbb500 (146519296)
    00:00:00.749
    00:00:00.749 [/Devices/ichac97/] (level 2)
    00:00:00.749
    00:00:00.749 [/Devices/ichac97/0/] (level 3)
    00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
    00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000005 (5)
    00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
    00:00:00.749
    00:00:00.749 [/Devices/ichac97/0/Config/] (level 4)
    00:00:00.749
    00:00:00.749 [/Devices/ichac97/0/LUN#0/] (level 4)
    00:00:00.749 Driver <string> = "AUDIO" (cch=6)
    00:00:00.749
    00:00:00.749 [/Devices/ichac97/0/LUN#0/Config/] (level 5)
    00:00:00.749 AudioDriver <string> = "alsa" (cch=5)
    00:00:00.749 StreamName <string> = "Windows XP" (cch=11)
    00:00:00.749
    00:00:00.749 [/TM/] (level 1)
    00:00:00.749 UTCOffset <integer> = 0x0000000000000000 (0)
    00:00:00.749
    00:00:00.749 ********************* End of CFGM dump **********************
    00:00:00.749 MM: cbHyperHeap=0x140000 (1310720)
    00:00:00.750 Logical host processors: 2, processor active mask: 0000000000000003
    00:00:00.750 ************************* CPUID dump ************************
    00:00:00.750 RAW Standard CPUIDs
    00:00:00.750 Function eax ebx ecx edx
    00:00:00.750 Gst: 00000000 00000005 756e6547 6c65746e 49656e69
    00:00:00.750 Hst: 0000000a 756e6547 6c65746e 49656e69
    00:00:00.750 Gst: 00000001 000006fd 00000800 00000009 078bf1bf
    00:00:00.750 Hst: 000006fd 01020800 0000e39d bfebfbff
    00:00:00.750 Gst: 00000002 05b0b101 005657f0 00000000 2cb43078
    00:00:00.750 Hst: 05b0b101 005657f0 00000000 2cb43078
    00:00:00.750 Gst: 00000003 00000000 00000000 00000000 00000000
    00:00:00.750 Hst: 00000000 00000000 00000000 00000000
    00:00:00.750 Gst: 00000004 00000000 00000000 00000000 00000000
    00:00:00.750 Hst: 04000121 01c0003f 0000003f 00000001
    00:00:00.750 Gst: 00000005 00000040 00000040 00000000 00000000
    00:00:00.750 Hst: 00000040 00000040 00000003 00001110
    00:00:00.750 Name: GenuineIntel
    00:00:00.750 Supports: 0-5
    00:00:00.750 Family: 6 Extended: 0 Effective: 6
    00:00:00.750 Model: 15 Extended: 0 Effective: 15
    00:00:00.750 Stepping: 13
    00:00:00.750 APIC ID: 0x00
    00:00:00.750 Logical CPUs: 0
    00:00:00.750 CLFLUSH Size: 8
    00:00:00.750 Brand ID: 0x00
    00:00:00.751 Mnemonic - Description = guest (host)
    00:00:00.751 FPU - x87 FPU on Chip = 1 (1)
    00:00:00.751 VME - Virtual 8086 Mode Enhancements = 1 (1)
    00:00:00.751 DE - Debugging extensions = 1 (1)
    00:00:00.751 PSE - Page Size Extension = 1 (1)
    00:00:00.751 TSC - Time Stamp Counter = 1 (1)
    00:00:00.751 MSR - Model Specific Registers = 1 (1)
    00:00:00.751 PAE - Physical Address Extension = 0 (1)
    00:00:00.751 MCE - Machine Check Exception = 1 (1)
    00:00:00.751 CX8 - CMPXCHG8B instruction = 1 (1)
    00:00:00.751 APIC - APIC On-Chip = 0 (1)
    00:00:00.751 Reserved = 0 (0)
    00:00:00.751 SEP - SYSENTER and SYSEXIT = 0 (1)
    00:00:00.751 MTRR - Memory Type Range Registers = 1 (1)
    00:00:00.751 PGE - PTE Global Bit = 1 (1)
    00:00:00.751 MCA - Machine Check Architecture = 1 (1)
    00:00:00.751 CMOV - Conditional Move Instructions = 1 (1)
    00:00:00.751 PAT - Page Attribute Table = 1 (1)
    00:00:00.751 PSE-36 - 36-bit Page Size Extention = 1 (1)
    00:00:00.751 PSN - Processor Serial Number = 0 (0)
    00:00:00.751 CLFSH - CLFLUSH Instruction. = 1 (1)
    00:00:00.751 Reserved = 0 (0)
    00:00:00.751 DS - Debug Store = 0 (1)
    00:00:00.751 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (1)
    00:00:00.751 MMX - Intel MMX Technology = 1 (1)
    00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
    00:00:00.751 SSE - SSE Support = 1 (1)
    00:00:00.751 SSE2 - SSE2 Support = 1 (1)
    00:00:00.751 SS - Self Snoop = 0 (1)
    00:00:00.751 HTT - Hyper-Threading Technolog = 0 (1)
    00:00:00.751 TM - Thermal Monitor = 0 (1)
    00:00:00.751 30 - Reserved = 0 (0)
    00:00:00.751 PBE - Pending Break Enable = 0 (1)
    00:00:00.751 Supports SSE3 or not = 1 (1)
    00:00:00.751 Reserved = 0 (0)
    00:00:00.751 DS Area 64-bit layout = 0 (1)
    00:00:00.751 Supports MONITOR/MWAIT = 1 (1)
    00:00:00.751 CPL-DS - CPL Qualified Debug Store = 0 (1)
    00:00:00.751 VMX - Virtual Machine Technology = 0 (0)
    00:00:00.751 SMX - Safer Mode Extensions = 0 (0)
    00:00:00.751 Enhanced SpeedStep Technology = 0 (1)
    00:00:00.751 Terminal Monitor 2 = 0 (1)
    00:00:00.751 Supports Supplemental SSE3 or not = 0 (1)
    00:00:00.751 L1 Context ID = 0 (0)
    00:00:00.751 Reserved = 0x0 (0x0)
    00:00:00.751 CMPXCHG16B = 0 (1)
    00:00:00.751 xTPR Update Control = 0 (1)
    00:00:00.751 Perf/Debug Capability MSR = 0 (1)
    00:00:00.751 Reserved = 0x0 (0x0)
    00:00:00.751 Direct Cache Access = 0 (0)
    00:00:00.751 Supports SSE4_1 or not = 0 (0)
    00:00:00.751 Supports SSE4_2 or not = 0 (0)
    00:00:00.751 Supports the x2APIC extensions = 0 (0)
    00:00:00.751 Supports MOVBE = 0 (0)
    00:00:00.751 Supports POPCNT = 0 (0)
    00:00:00.751 Reserved = 0x0 (0x0)
    00:00:00.751 Supports XSAVE = 0 (0)
    00:00:00.751 Supports OSXSAVE = 0 (0)
    00:00:00.751 Reserved = 0x0 (0x0)
    00:00:00.751
    00:00:00.751 RAW Extended CPUIDs
    00:00:00.751 Function eax ebx ecx edx
    00:00:00.751 Gst: 80000000 80000008 00000000 00000000 00000000
    00:00:00.751 Hst: 80000008 00000000 00000000 00000000
    00:00:00.751 Gst: 80000001 00000000 00000000 00000000 00000000
    00:00:00.751 Hst: 00000000 00000000 00000001 20100000
    00:00:00.751 Gst: 80000002 65746e49 2952286c 6e655020 6d756974
    00:00:00.751 Hst: 65746e49 2952286c 6e655020 6d756974
    00:00:00.751 Gst: 80000003 20295228 6c617544 50432020 54202055
    00:00:00.751 Hst: 20295228 6c617544 50432020 54202055
    00:00:00.751 Gst: 80000004 30303433 20402020 36312e32 007a4847
    00:00:00.751 Hst: 30303433 20402020 36312e32 007a4847
    00:00:00.751 Gst: 80000005 00000000 00000000 00000000 00000000
    00:00:00.751 Hst: 00000000 00000000 00000000 00000000
    00:00:00.751 Gst: 80000006 00000000 00000000 04004040 00000000
    00:00:00.751 Hst: 00000000 00000000 04004040 00000000
    00:00:00.751 Gst: 80000007 00000000 00000000 00000000 00000000
    00:00:00.751 Hst: 00000000 00000000 00000000 00000000
    00:00:00.751 Gst: 80000008 00003024 00000000 00000000 00000000
    00:00:00.751 Hst: 00003024 00000000 00000000 00000000
    00:00:00.751 Gst: 80000009 07280202 00000000 00000000 00000503*
    00:00:00.751 Hst: 07280202 00000000 00000000 00000503
    00:00:00.751 Ext Name:
    00:00:00.751 Ext Supports: 0x80000000-0x80000008
    00:00:00.751 Family: 0 Extended: 0 Effective: 0
    00:00:00.751 Model: 0 Extended: 0 Effective: 0
    00:00:00.751 Stepping: 0
    00:00:00.751 Brand ID: 0x000
    00:00:00.751 Mnemonic - Description = guest (host)
    00:00:00.751 FPU - x87 FPU on Chip = 0 (0)
    00:00:00.751 VME - Virtual 8086 Mode Enhancements = 0 (0)
    00:00:00.751 DE - Debugging extensions = 0 (0)
    00:00:00.751 PSE - Page Size Extension = 0 (0)
    00:00:00.751 TSC - Time Stamp Counter = 0 (0)
    00:00:00.751 MSR - K86 Model Specific Registers = 0 (0)
    00:00:00.751 PAE - Physical Address Extension = 0 (0)
    00:00:00.751 MCE - Machine Check Exception = 0 (0)
    00:00:00.751 CX8 - CMPXCHG8B instruction = 0 (0)
    00:00:00.751 APIC - APIC On-Chip = 0 (0)
    00:00:00.751 10 - Reserved = 0 (0)
    00:00:00.751 SEP - SYSCALL and SYSRET = 0 (0)
    00:00:00.751 MTRR - Memory Type Range Registers = 0 (0)
    00:00:00.751 PGE - PTE Global Bit = 0 (0)
    00:00:00.751 MCA - Machine Check Architecture = 0 (0)
    00:00:00.751 CMOV - Conditional Move Instructions = 0 (0)
    00:00:00.751 PAT - Page Attribute Table = 0 (0)
    00:00:00.751 PSE-36 - 36-bit Page Size Extention = 0 (0)
    00:00:00.751 18 - Reserved = 0 (0)
    00:00:00.751 19 - Reserved = 0 (0)
    00:00:00.751 NX - No-Execute Page Protection = 0 (1)
    00:00:00.751 DS - Debug Store = 0 (0)
    00:00:00.751 AXMMX - AMD Extensions to MMX Instr. = 0 (0)
    00:00:00.751 MMX - Intel MMX Technology = 0 (0)
    00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 0 (0)
    00:00:00.751 25 - AMD fast FXSAVE and FXRSTOR Instr.= 0 (0)
    00:00:00.751 26 - 1 GB large page support = 0 (0)
    00:00:00.751 27 - RDTSCP instruction = 0 (0)
    00:00:00.751 28 - Reserved = 0 (0)
    00:00:00.751 29 - AMD Long Mode = 0 (1)
    00:00:00.751 30 - AMD Extensions to 3DNow = 0 (0)
    00:00:00.751 31 - AMD 3DNow = 0 (0)
    00:00:00.751 LahfSahf - LAHF/SAHF in 64-bit mode = 0 (1)
    00:00:00.751 CmpLegacy - Core MP legacy mode (depr) = 0 (0)
    00:00:00.751 SVM - AMD VM Extensions = 0 (0)
    00:00:00.751 APIC registers starting at 0x400 = 0 (0)
    00:00:00.751 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (0)
    00:00:00.751 Advanced bit manipulation = 0 (0)
    00:00:00.751 SSE4A instruction support = 0 (0)
    00:00:00.751 Misaligned SSE mode = 0 (0)
    00:00:00.751 PREFETCH and PREFETCHW instruction = 0 (0)
    00:00:00.751 OS visible workaround = 0 (0)
    00:00:00.751 Instruction based sampling = 0 (0)
    00:00:00.751 SSE5 support = 0 (0)
    00:00:00.751 SKINIT, STGI, and DEV support = 0 (0)
    00:00:00.751 Watchdog timer support. = 0 (0)
    00:00:00.751 31:14 - Reserved = 0x0 (0x0)
    00:00:00.751 Full Name: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz
    00:00:00.751 TLB 2/4M Instr/Uni: res0 0 entries
    00:00:00.751 TLB 2/4M Data: res0 0 entries
    00:00:00.751 TLB 4K Instr/Uni: res0 0 entries
    00:00:00.751 TLB 4K Data: res0 0 entries
    00:00:00.751 L1 Instr Cache Line Size: 0 bytes
    00:00:00.751 L1 Instr Cache Lines Per Tag: 0
    00:00:00.751 L1 Instr Cache Associativity: res0
    00:00:00.751 L1 Instr Cache Size: 0 KB
    00:00:00.751 L1 Data Cache Line Size: 0 bytes
    00:00:00.751 L1 Data Cache Lines Per Tag: 0
    00:00:00.751 L1 Data Cache Associativity: res0
    00:00:00.751 L1 Data Cache Size: 0 KB
    00:00:00.751 L2 TLB 2/4M Instr/Uni: off 0 entries
    00:00:00.751 L2 TLB 2/4M Data: off 0 entries
    00:00:00.751 L2 TLB 4K Instr/Uni: off 0 entries
    00:00:00.751 L2 TLB 4K Data: off 0 entries
    00:00:00.751 L2 Cache Line Size: 0 bytes
    00:00:00.751 L2 Cache Lines Per Tag: 0
    00:00:00.751 L2 Cache Associativity: off
    00:00:00.751 L2 Cache Size: 0 KB
    00:00:00.751 APM Features:
    00:00:00.751 Physical Address Width: 36 bits
    00:00:00.751 Virtual Address Width: 48 bits
    00:00:00.751 Physical Core Count: 0
    00:00:00.751
    00:00:00.751 RAW Centaur CPUIDs
    00:00:00.751 Function eax ebx ecx edx
    00:00:00.751 Gst: c0000000 07280202 00000000 00000000 00000503
    00:00:00.751 Hst: 07280202 00000000 00000000 00000503
    00:00:00.751 Gst: c0000001 07280202 00000000 00000000 00000503
    00:00:00.751 Hst: 07280202 00000000 00000000 00000503
    00:00:00.751 Gst: c0000002 07280202 00000000 00000000 00000503
    00:00:00.751 Hst: 07280202 00000000 00000000 00000503
    00:00:00.751 Gst: c0000003 07280202 00000000 00000000 00000503
    00:00:00.751 Hst: 07280202 00000000 00000000 00000503
    00:00:00.751 Centaur Supports: 0xc0000000-0x07280202
    00:00:00.751 Mnemonic - Description = guest (host)
    00:00:00.751 AIS - Alternate Instruction Set = 0 (1)
    00:00:00.751 AIS-E - AIS enabled = 0 (1)
    00:00:00.751 RNG - Random Number Generator = 0 (0)
    00:00:00.751 RNG-E - RNG enabled = 0 (0)
    00:00:00.751 LH - LongHaul MSR 0000_110Ah = 0 (0)
    00:00:00.751 FEMMS - FEMMS = 0 (0)
    00:00:00.751 ACE - Advanced Cryptography Engine = 0 (0)
    00:00:00.751 ACE-E - ACE enabled = 0 (0)
    00:00:00.751 ACE2 - Advanced Cryptography Engine 2 = 0 (1)
    00:00:00.751 ACE2-E - ACE enabled = 0 (0)
    00:00:00.751 PHE - Hash Engine = 0 (1)
    00:00:00.751 PHE-E - PHE enabled = 0 (0)
    00:00:00.751 PMM - Montgomery Multiplier = 0 (0)
    00:00:00.751 PMM-E - PMM enabled = 0 (0)
    00:00:00.751
    00:00:00.751
    00:00:00.751 ******************** End of CPUID dump **********************
    00:00:00.775 REM: VBoxREM32
    00:00:00.779 TM: GIP - u32Mode=1 (SyncTSC) u32UpdateHz=75
    00:00:00.812 TM: cTSCTicksPerSecond=0x7474ed92 (1 953 820 050) fTSCVirtualized=true fTSCUseRealTSC=false
    00:00:00.812 TM: fMaybeUseOffsettedHostTSC=true TSCTiedToExecution=false TSCNotTiedToHalt=false
    00:00:00.812 CoreCode: R3=b3f47000 R0=f805a000 RC=a02b0000 Phys=0000000035e14000 cb=0x2000
    00:00:00.891 [SMP] BIOS with 1 CPUs
    00:00:00.928 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xf8151060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
    00:00:00.939 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xf809c060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
    00:00:00.939 Activating Local APIC
    00:00:00.939 CPUMSetGuestCpuIdFeature: Enabled APIC
    00:00:00.939 CPUMSetGuestCpuIdFeature: Disabled x2APIC
    00:00:00.939 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
    00:00:00.953 Shared Folders service loaded.
    00:00:01.003 VDInit finished
    00:00:01.003 PIIX3 ATA: LUN#0: disk, PCHS=4161/16/63, total number of sectors 4194304
    00:00:01.003 PIIX3 ATA: LUN#1: no unit
    00:00:01.003 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 0, passthrough disabled
    00:00:01.003 PIIX3 ATA: LUN#3: no unit
    00:00:01.003 PIIX3 ATA: Ctl#0: finished processing RESET
    00:00:01.103 PIIX3 ATA: Ctl#1: finished processing RESET
    00:00:01.204 IntNet#0: szNetwork={HostInterfaceNetworking-wlan0} enmTrunkType=3 szTrunk={wlan0} fFlags=0x1 cbRecv=223232 cbSend=36864
    00:00:01.204 PDM: Failed to construct 'pcnet'/0! VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700) - The component factory was not found.
    00:00:01.214 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
    00:00:01.214 One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND)} aWarning=false, preserve=false
    00:00:01.220 Power up failed (vrc=VERR_SUPDRV_COMPONENT_NOT_FOUND, rc=NS_ERROR_FAILURE (0X80004005))
    Last edited by K-radical (2009-12-07 17:42:13)

    wonder wrote:be sure that the modules are loaded. lsmod | grep vbox.
    for bridged you have to load vboxnetflt
    Thanks a bunch...
    sudo modprobe vboxnetflt
    did it.

  • [SOLVED] Intel driver is not loading.

    Hello,
    I just got a new laptop and finally put Arch on it. I have to use "nomodeset" to see anything (Putting the intel_agp and i915 modules in the initramfs does not work, nor does the SVIDEO option.) and I installed xorg and xf86-video-intel, and ran startx, and it failed to run.
    Below are my Xorg.log.0 and lspci -k outputs.
    Xorg.log.0
    [ 1307.124]
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 1307.129] X Protocol Version 11, Revision 0
    [ 1307.130] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 1307.131] Current Operating System: Linux spike 3.8.8-2-ARCH #1 SMP PREEMPT Tue Apr 23 10:28:14 CEST 2013 x86_64
    [ 1307.131] Kernel command line: root=/dev/sda5 ro rootfstype=ext4 systemd.unit=graphical.target nomodeset initrd=EFI\arch\initramfs-arch.img
    [ 1307.133] Build Date: 17 April 2013 02:37:06PM
    [ 1307.134]
    [ 1307.136] Current version of pixman: 0.28.2
    [ 1307.138] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 1307.138] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1307.142] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 25 17:51:54 2013
    [ 1307.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1307.143] (==) No Layout section. Using the first Screen section.
    [ 1307.143] (==) No screen section available. Using defaults.
    [ 1307.143] (**) |-->Screen "Default Screen Section" (0)
    [ 1307.143] (**) | |-->Monitor "<default monitor>"
    [ 1307.144] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 1307.144] (==) Automatically adding devices
    [ 1307.144] (==) Automatically enabling devices
    [ 1307.144] (==) Automatically adding GPU devices
    [ 1307.144] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 1307.144] Entry deleted from font path.
    [ 1307.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1307.144] Entry deleted from font path.
    [ 1307.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1307.144] Entry deleted from font path.
    [ 1307.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1307.144] Entry deleted from font path.
    [ 1307.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1307.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1307.144] Entry deleted from font path.
    [ 1307.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1307.144] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 1307.144] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 1307.144] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 1307.144] (II) Loader magic: 0x7fcc20
    [ 1307.144] (II) Module ABI versions:
    [ 1307.144] X.Org ANSI C Emulation: 0.4
    [ 1307.144] X.Org Video Driver: 14.1
    [ 1307.144] X.Org XInput driver : 19.1
    [ 1307.144] X.Org Server Extension : 7.0
    [ 1307.145] (--) PCI:*(0:0:2:0) 8086:0116:103c:1854 rev 9, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
    [ 1307.146] Initializing built-in extension Generic Event Extension
    [ 1307.147] Initializing built-in extension SHAPE
    [ 1307.148] Initializing built-in extension MIT-SHM
    [ 1307.149] Initializing built-in extension XInputExtension
    [ 1307.150] Initializing built-in extension XTEST
    [ 1307.151] Initializing built-in extension BIG-REQUESTS
    [ 1307.152] Initializing built-in extension SYNC
    [ 1307.153] Initializing built-in extension XKEYBOARD
    [ 1307.154] Initializing built-in extension XC-MISC
    [ 1307.155] Initializing built-in extension SECURITY
    [ 1307.156] Initializing built-in extension XINERAMA
    [ 1307.157] Initializing built-in extension XFIXES
    [ 1307.158] Initializing built-in extension RENDER
    [ 1307.159] Initializing built-in extension RANDR
    [ 1307.159] Initializing built-in extension COMPOSITE
    [ 1307.160] Initializing built-in extension DAMAGE
    [ 1307.161] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1307.162] Initializing built-in extension DOUBLE-BUFFER
    [ 1307.163] Initializing built-in extension RECORD
    [ 1307.163] Initializing built-in extension DPMS
    [ 1307.164] Initializing built-in extension X-Resource
    [ 1307.165] Initializing built-in extension XVideo
    [ 1307.165] Initializing built-in extension XVideo-MotionCompensation
    [ 1307.166] Initializing built-in extension XFree86-VidModeExtension
    [ 1307.167] Initializing built-in extension XFree86-DGA
    [ 1307.167] Initializing built-in extension XFree86-DRI
    [ 1307.168] Initializing built-in extension DRI2
    [ 1307.168] (II) LoadModule: "glx"
    [ 1307.168] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1307.168] (II) Module glx: vendor="X.Org Foundation"
    [ 1307.168] compiled for 1.14.1, module version = 1.0.0
    [ 1307.168] ABI class: X.Org Server Extension, version 7.0
    [ 1307.168] (==) AIGLX enabled
    [ 1307.169] Loading extension GLX
    [ 1307.169] (==) Matched intel as autoconfigured driver 0
    [ 1307.169] (==) Matched vesa as autoconfigured driver 1
    [ 1307.169] (==) Matched modesetting as autoconfigured driver 2
    [ 1307.169] (==) Matched fbdev as autoconfigured driver 3
    [ 1307.169] (==) Assigned the driver to the xf86ConfigLayout
    [ 1307.169] (II) LoadModule: "intel"
    [ 1307.169] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 1307.169] (II) Module intel: vendor="X.Org Foundation"
    [ 1307.169] compiled for 1.14.0, module version = 2.21.6
    [ 1307.169] Module class: X.Org Video Driver
    [ 1307.169] ABI class: X.Org Video Driver, version 14.1
    [ 1307.169] (II) LoadModule: "vesa"
    [ 1307.170] (WW) Warning, couldn't open module vesa
    [ 1307.170] (II) UnloadModule: "vesa"
    [ 1307.170] (II) Unloading vesa
    [ 1307.170] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 1307.170] (II) LoadModule: "modesetting"
    [ 1307.170] (WW) Warning, couldn't open module modesetting
    [ 1307.170] (II) UnloadModule: "modesetting"
    [ 1307.170] (II) Unloading modesetting
    [ 1307.170] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 1307.170] (II) LoadModule: "fbdev"
    [ 1307.170] (WW) Warning, couldn't open module fbdev
    [ 1307.170] (II) UnloadModule: "fbdev"
    [ 1307.170] (II) Unloading fbdev
    [ 1307.170] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 1307.170] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 1307.170] (++) using VT number 1
    [ 1307.172] (EE) No devices detected.
    [ 1307.172]
    Fatal server error:
    [ 1307.172] no screens found
    [ 1307.172] (EE)
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 1307.172] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 1307.172] (EE)
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    Subsystem: Hewlett-Packard Company Device 1854
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    Subsystem: Hewlett-Packard Company Device 1854
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Hewlett-Packard Company Device 1854
    Kernel driver in use: mei
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    Subsystem: Hewlett-Packard Company Device 1854
    Kernel driver in use: ehci-pci
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 1854
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    Kernel driver in use: pcieport
    00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
    Kernel driver in use: pcieport
    00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    Subsystem: Hewlett-Packard Company Device 1854
    Kernel driver in use: ehci-pci
    00:1f.0 ISA bridge: Intel Corporation HM75 Express Chipset LPC Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 1854
    Kernel driver in use: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    Subsystem: Hewlett-Packard Company Device 1854
    Kernel driver in use: ahci
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 1854
    01:00.0 Network controller: Ralink corp. Device 539b
    Subsystem: Hewlett-Packard Company Device 18ed
    Kernel driver in use: rt2800pci
    02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
    Subsystem: Hewlett-Packard Company Device 1854
    Kernel driver in use: rtsx_pci
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
    Subsystem: Hewlett-Packard Company Device 1854
    Kernel driver in use: r8169
    As you can see, i915 is not loaded for the VGA controller, even though it should be. I do a modprobe i915, in case for whatever reason udev can't seem to do it, run lspci -k and nothing changes. dmesg doesn't even seem to acknowledge that I did anything.
    Does the i915 driver not support this chipset? That seems highly unlikely.
    Last edited by Yaro (2013-04-26 14:07:36)

    My computer on my signature is newer than yours and its supported.
    I guess there is a backlight issue on your computer. try removing nomodeset and append
    acpi_backlight=vendor
    to your kernel comand line. Tell us what u see.

  • [SOLVED] virtual box (vboxdrv: not loaded)

    I have installed virtualbox
    pacman -S virtualbox_bin
    and installed virtualbox_bin 3.0.0-2
    /etc/rc.d/vboxdrv not found
    When I run virtual box, it says vboxdrv is not loaded
    what to do
    Last edited by sant527 (2009-07-10 06:33:36)

    For reference..
    pacman -Ql packageName shows what files a package contains.
    You might add | grep bin or something of the sort after it to find the binaries quickly (sometimes.. some files contain 'bin' in the title or a folder name, obviously)
    that question has been asked many times before. please learn to use Pacman, the Forum (and corresponding Search functions), and the Wiki before asking questions, and edit your first post to append [SOLVED] to the title when you find an appropriate answer to your questions.. it will save those of us looking to help time and frustration if you do all of that. thanks.
    Last edited by FrozenFox (2009-07-06 09:26:17)

  • Usbser_edge module not loaded, lots of undefined symbols

    Greetings folks,
    I've just recently more or less completed my Solaris 10 (sparc) jumpstart image and have noticed that upon booting the system will warn about undefined symbols for the usbser_edge module. I've been hunting around and I can't seem to find out where this module is specified to be loaded. The machine in question is a 220R, and I'd like to figure out how to not load this module so the warnings will go away:
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf0'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf1'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf2'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_free_log_hdl'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_log_hdl'
    Sep 9 09:33:25 jump-test krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'usbser'
    Sep 9 09:33:25 jump-test krtld: [ID 749970 kern.notice] WARNING: usbser:
    Sep 9 09:33:25 jump-test krtld: [ID 225575 kern.notice] unable to resolve dependency, module 'misc/usba' not found
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_lookup_ep_data'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_parse_data'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf0'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf2'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_ctrl_xfer_wait'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_close'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_power'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_sync_ctrl_xfer'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_intr_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_getinfo'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_close'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_unregister_event_cbs'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_reset'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_bulk_xfer'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_bulk_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_register_event_cbs'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_intr_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_log_hdl'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_stop_intr_polling'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_attach'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_detach'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_get_dev_data'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_open'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_log_hdl'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_rsrv'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_wsrv'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_wput'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_open'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_check_same_device'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_intr_xfer'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_create_pm_components'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_free_descr_tree'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl0'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl1'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl2'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl3'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_get_max_bulk_transfer_size'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usbser_soft_state_size'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_bulk_req'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_handle_remote_wakeup'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_client_attach'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_client_detach'
    Sep 9 09:33:28 jump-test krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'usbser_edge'
    Sep 9 09:33:28 jump-test krtld: [ID 749970 kern.notice] WARNING: usbser_edge:
    Sep 9 09:33:28 jump-test krtld: [ID 225575 kern.notice] unable to resolve dependency, module 'misc/usba' not found
    Thanks in advance for any advice anyone can provide.
    pb

    I just attempted a generic search at Sunsolve, for "usbser_edge".
    It produced references to a lot of documents available after contract login to the site.
    If you have a Spectrum login account, get to BugID 4703982.
    It's from 2003 or so...
    but it discusses the SUNWuedg package being incorrectly installed,
    on beta versions of Sol-10, to an E250 and to a SB1000.
    Other search result references to various BugID's also happened to discuss
    removing references to the driver in the /etc/name_to_major file
    as well as in the /etc/driver_aliases file.
    See BugID 4790469 or BugID 5045102
    I don't trust my skill level with mucking around with such files, however.
    If you have contract coverage for the OS or for that system, open a support case.
    If not, then see if the SUNWuedg package is installed and remove it.
    Then a reconfiguration reboot may be in order.
    What the heck, try a reconfiguration reboot just for grins and giggles.
    ... just my two cents, at least.

  • Autofs module not loading

    Hi, can't manage to load the autofs kernel module.
    uname -r
    3.7.8-1-ARCH
    community/autofs 5.0.7-1 [installed]
    sudo modprobe -v autofs
    modprobe: FATAL: Module autofs not found
    sudo modprobe -v autofs4
    lsmod |grep auto
    Nothing.
    thx

    This is not a solution to your actual problem, but you know that systemd actually has autofs functionality built in?  Check out the x-systemd.automount mount option (along with noauto I believe).  See the man pages for systemd.mount and systemd.automount, it will explain it.  Though these types of units are typically automagically created by systemd on boot time, so you can still just use fstab... those man pages just explain how to use those mount options, as they are not on the mount man page.

  • Parallel port printer modules not loading autmatically

    According to the wiki entry for CUPS, either the kernel or or a small configuration file in /etc/modules-load (not /etc/modules-load.d) is supposed to automatically load these modules on boot. When I run lsmod I'm finding none of the printer modules (lp, parport, parport_pc) are getting loaded even though the printer is attached and powered up. Any idea why these modules are not loading? They load perfectly well manually with the modprobe command.
    As the wiki specifies, I do have a configuration file in place at /etc/modules-load/printing.conf with the following contents:
    lp
    parport
    parport_pc

    Commenting out the INSTALL lines in modprobe.conf worked perfectly.
    Before that i tried the stock kernel form current and am now using the one from testing. Neither worked with sound while the INSTALL lines were ther.
    What changed?

Maybe you are looking for