[SOLVED] Intel driver is not loading.

Hello,
I just got a new laptop and finally put Arch on it. I have to use "nomodeset" to see anything (Putting the intel_agp and i915 modules in the initramfs does not work, nor does the SVIDEO option.) and I installed xorg and xf86-video-intel, and ran startx, and it failed to run.
Below are my Xorg.log.0 and lspci -k outputs.
Xorg.log.0
[ 1307.124]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 1307.129] X Protocol Version 11, Revision 0
[ 1307.130] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 1307.131] Current Operating System: Linux spike 3.8.8-2-ARCH #1 SMP PREEMPT Tue Apr 23 10:28:14 CEST 2013 x86_64
[ 1307.131] Kernel command line: root=/dev/sda5 ro rootfstype=ext4 systemd.unit=graphical.target nomodeset initrd=EFI\arch\initramfs-arch.img
[ 1307.133] Build Date: 17 April 2013 02:37:06PM
[ 1307.134]
[ 1307.136] Current version of pixman: 0.28.2
[ 1307.138] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 1307.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1307.142] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 25 17:51:54 2013
[ 1307.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1307.143] (==) No Layout section. Using the first Screen section.
[ 1307.143] (==) No screen section available. Using defaults.
[ 1307.143] (**) |-->Screen "Default Screen Section" (0)
[ 1307.143] (**) | |-->Monitor "<default monitor>"
[ 1307.144] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1307.144] (==) Automatically adding devices
[ 1307.144] (==) Automatically enabling devices
[ 1307.144] (==) Automatically adding GPU devices
[ 1307.144] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1307.144] Entry deleted from font path.
[ 1307.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1307.144] Entry deleted from font path.
[ 1307.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1307.144] Entry deleted from font path.
[ 1307.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1307.144] Entry deleted from font path.
[ 1307.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1307.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1307.144] Entry deleted from font path.
[ 1307.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1307.144] (==) FontPath set to:
/usr/share/fonts/misc/
[ 1307.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1307.144] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1307.144] (II) Loader magic: 0x7fcc20
[ 1307.144] (II) Module ABI versions:
[ 1307.144] X.Org ANSI C Emulation: 0.4
[ 1307.144] X.Org Video Driver: 14.1
[ 1307.144] X.Org XInput driver : 19.1
[ 1307.144] X.Org Server Extension : 7.0
[ 1307.145] (--) PCI:*(0:0:2:0) 8086:0116:103c:1854 rev 9, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[ 1307.146] Initializing built-in extension Generic Event Extension
[ 1307.147] Initializing built-in extension SHAPE
[ 1307.148] Initializing built-in extension MIT-SHM
[ 1307.149] Initializing built-in extension XInputExtension
[ 1307.150] Initializing built-in extension XTEST
[ 1307.151] Initializing built-in extension BIG-REQUESTS
[ 1307.152] Initializing built-in extension SYNC
[ 1307.153] Initializing built-in extension XKEYBOARD
[ 1307.154] Initializing built-in extension XC-MISC
[ 1307.155] Initializing built-in extension SECURITY
[ 1307.156] Initializing built-in extension XINERAMA
[ 1307.157] Initializing built-in extension XFIXES
[ 1307.158] Initializing built-in extension RENDER
[ 1307.159] Initializing built-in extension RANDR
[ 1307.159] Initializing built-in extension COMPOSITE
[ 1307.160] Initializing built-in extension DAMAGE
[ 1307.161] Initializing built-in extension MIT-SCREEN-SAVER
[ 1307.162] Initializing built-in extension DOUBLE-BUFFER
[ 1307.163] Initializing built-in extension RECORD
[ 1307.163] Initializing built-in extension DPMS
[ 1307.164] Initializing built-in extension X-Resource
[ 1307.165] Initializing built-in extension XVideo
[ 1307.165] Initializing built-in extension XVideo-MotionCompensation
[ 1307.166] Initializing built-in extension XFree86-VidModeExtension
[ 1307.167] Initializing built-in extension XFree86-DGA
[ 1307.167] Initializing built-in extension XFree86-DRI
[ 1307.168] Initializing built-in extension DRI2
[ 1307.168] (II) LoadModule: "glx"
[ 1307.168] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1307.168] (II) Module glx: vendor="X.Org Foundation"
[ 1307.168] compiled for 1.14.1, module version = 1.0.0
[ 1307.168] ABI class: X.Org Server Extension, version 7.0
[ 1307.168] (==) AIGLX enabled
[ 1307.169] Loading extension GLX
[ 1307.169] (==) Matched intel as autoconfigured driver 0
[ 1307.169] (==) Matched vesa as autoconfigured driver 1
[ 1307.169] (==) Matched modesetting as autoconfigured driver 2
[ 1307.169] (==) Matched fbdev as autoconfigured driver 3
[ 1307.169] (==) Assigned the driver to the xf86ConfigLayout
[ 1307.169] (II) LoadModule: "intel"
[ 1307.169] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1307.169] (II) Module intel: vendor="X.Org Foundation"
[ 1307.169] compiled for 1.14.0, module version = 2.21.6
[ 1307.169] Module class: X.Org Video Driver
[ 1307.169] ABI class: X.Org Video Driver, version 14.1
[ 1307.169] (II) LoadModule: "vesa"
[ 1307.170] (WW) Warning, couldn't open module vesa
[ 1307.170] (II) UnloadModule: "vesa"
[ 1307.170] (II) Unloading vesa
[ 1307.170] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1307.170] (II) LoadModule: "modesetting"
[ 1307.170] (WW) Warning, couldn't open module modesetting
[ 1307.170] (II) UnloadModule: "modesetting"
[ 1307.170] (II) Unloading modesetting
[ 1307.170] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 1307.170] (II) LoadModule: "fbdev"
[ 1307.170] (WW) Warning, couldn't open module fbdev
[ 1307.170] (II) UnloadModule: "fbdev"
[ 1307.170] (II) Unloading fbdev
[ 1307.170] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1307.170] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 1307.170] (++) using VT number 1
[ 1307.172] (EE) No devices detected.
[ 1307.172]
Fatal server error:
[ 1307.172] no screens found
[ 1307.172] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 1307.172] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1307.172] (EE)
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 1854
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 1854
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: mei
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM75 Express Chipset LPC Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
01:00.0 Network controller: Ralink corp. Device 539b
Subsystem: Hewlett-Packard Company Device 18ed
Kernel driver in use: rt2800pci
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: rtsx_pci
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: r8169
As you can see, i915 is not loaded for the VGA controller, even though it should be. I do a modprobe i915, in case for whatever reason udev can't seem to do it, run lspci -k and nothing changes. dmesg doesn't even seem to acknowledge that I did anything.
Does the i915 driver not support this chipset? That seems highly unlikely.
Last edited by Yaro (2013-04-26 14:07:36)

My computer on my signature is newer than yours and its supported.
I guess there is a backlight issue on your computer. try removing nomodeset and append
acpi_backlight=vendor
to your kernel comand line. Tell us what u see.

Similar Messages

[SOLVED] Synaptics Driver is not loaded

I try to set up a T400 and ran into problems with the touchpad. My 10-synaptics.conf sets synaptics as the driver:
Section "InputDevice"
Identifier "touchpad catchall"
Driver "synaptics"
Option "AlwaysCore"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "SendCoreEvents" "true"
Option "LeftEdge" "1632"
Option "RightEdge" "5312"
Option "TopEdge" "1575"
Option "BottomEdge" "4281"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "MinSpeed" "0.01"
Option "MaxSpeed" "0.05"
Option "AccelFactor" "0.0005"
Option "VertEdgeScroll" "on"
Option "HorizEdgeScroll" "on"
Option "VertScrollDelta" "10"
Option "HorizScrollDelta" "10"
Option "SHMConfig" "on"
#Option "VertTwoFingerScroll" "true"
#Option "HorizTwoFingerScroll" "true"
EndSection
Still I find in Xorg.0.log:
[ 1471.148] (**) RADEON(0): Option "EXAVSync" "off"
[ 1471.584] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 1471.584] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1471.584] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 1471.584] (**) SynPS/2 Synaptics TouchPad: always reports core events
synclient -l gives:
Couldn't find synaptics properties. No synaptics driver loaded?
Also of course all synaptic options doesn't work..
Last edited by miro279 (2012-07-01 09:13:22)

I followed your advice and got suspicious when my touchpad stoped working completly. So I got rid of the 10-synaptics.conf posted above (which was taken from the T400 arch wiki: https://wiki.archlinux.org/index.php/Le … _UltraNav) and started a new from strach. As there seems to be no native multitouch support I found the debian page quite helpful: http://wiki.debian.org/SynapticsTouchpad.
My new 10-synaptics.conf looks like that:
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "EmulateTwoFingerMinZ" "35"
Option "EmulateTwoFingerMinW" "8"
Option "TapButton3" "3"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "1"
Option "VertEdgeScroll" "1"
Option "HorizEdgeScroll" "1"
Option "VertScrollDelta" "100"
Option "HorizScrollDelta" "100"
Option "CoastingSpeed" "8"
Option "CornerCoasting" "1"
Option "CircularScrolling" "1"
Option "CircScrollTrigger" "7"
EndSection
and everything works as suposed. Thanks for the hint!

HT1752 IMac G5 Intel. Disk drive will not load data, music or video disks. What is this indication of? Can it be fixed?

If my disk drive is NOT loading cds, dvds, etc., what fix is suggested?

PS - your Mac is Intel. G5 is the previous processer, it can't be both

SoundMax audio driver did not load after returning from StandBy.

After my computer returns from StandBy, it shows me this message. "The SoundMax audio driver did not load. You may need to reinstall SoundMAX". I have downloaded and installed the latest driver that was supposed to fix this issue on Windows XP T61. Is there another solution?

Hi,
I wanted to confirm, that this issue occurs also to me, and started happening recently. Also the driver sometimes does not start when simply booting clean (not returning from StandBy). I'm not sure, but I think this started happening after some driver update (I do upgrade my drivers when lenovo updates them hoping they'll fix some of the annoying glitches, but this is what I usually get...).
My machine is: lenovo t61 7664-19G
And I also have: windows XP
If someone more tech-able would like to investigate this, I would be happy to supply all the details.

Sidetrack driver does not load

Hi,
I've installed the latest version of sidetrack. but when i open sidetrack a message window pops up saying:
'The SideTrack driver is not loaded.
Please restart your computer to load the driver.'
I have done exactly as the readme file says.
When i got my mac i did a custom install so i did'nt fill up my hard drive with language packs etc. i do not need. do i need to install something else that would otherwise be in osx for this to work?

I have tried restarting several times aswell as uninstalling, reinstalling and downloading the program again.
When i right click the sidetrack app. in the startup folder and select get info it says that the application is a unix executible file.
I can only find one other person on the forum with this problem but it was not answered.
Thank you

Apple mobile device DRIVER does not load/ is not installed

this is what my itunes diagonstic says concerning connectivity tests
Microsoft Windows 7 x64 Ultimate Edition (Build 7100)
Hewlett-Packard HP Pavilion dv2700 Notebook PC
iTunes 8.1.1.10
QuickTime 7.6
FairPlay 1.3.6
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
*Apple Mobile Device 2.4.1.7*
*Apple Mobile Device Driver not found.*
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 88107370E6DED672
Current user is not an administrator.
The current local date and time is 2009-05-16 00:21:13.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 8.1.1.10 is currently running.
iTunesHelper 8.1.1.10 is currently running.
Apple Mobile Device service 2.12.36.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
Serial Number:
i found it out that the apple mobile device is running yet there is no driver that is loading so that it can recognize my iphone
any suggestions on how to get the computer automatically to search the driver in the system32/drivers folder?
i already tried downloading the driver and copying into the folder and doing restart
i've also tried to reinstalling itunes and i used winrar to extract the applemobiledevice support and repaired but it didn't do anything
are there any other suggestions?

Sorry, I should have qualified that: in the past I have given dump/debug/log details to people in the 'Windows' world to try to solve problems that I've thought have needed immense details to resolve but since owning a Mac I have discovered that if I am thinking at that level of detail then I have lost the real plot and my pulling back and looking at things simply again has been an eye-opener, hence my suggestion in response to your question to simply 'get a Mac'.
Part of the 'issue' with Windows seems to be its varieties and variants (Windows 7 x64 Ultimate Edition (Build 7100), for example) and the range of various and variable hardware on which it can run, too often with random and non-deterministic results, not to mention the almost limitless and unnecessary combinations of user-configuration options and requirements!
Seriously, get a Mac if you are into the Apple world, even on the periphery, if you want an easier life (in my experience).
Good luck with your 'issue'.

[SOLVED] Intel DRI does not work after update

Hi,
after update of kernel from 3.5.6 to 3.6.5 and intel driver and deletion of dri2proto and mesa via pacman -Qdt (there are no more dependencies).. acceleration is no longer working
$ export LIBGL_DEBUG=verbose; glxinfo | grep renderer
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/i965_dri.so
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: i965
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
libGL: Can't open configuration file /etc/drirc: No such file or directory.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301)
Configuration:
SandyBridge I5, Intel HD 3000
Can somebody help?
Last edited by microcz (2012-11-07 06:15:23)

OT: A simpler way to check if some packages are installed:
$ pacman -Q intel-dri libgl foobar
intel-dri 9.0-1
libgl 9.0-1
error: package 'foobar' was not found
What's the output of 'groups'? Maybe you need to add yourself to 'video' group?
http://www.linuxquestions.org/questions … nf-794105/
http://www.mail-archive.com/dri-devel@l … 41313.html

Non-native printer driver would not load

Hi,
I have a PowerPC G4 and two printers, an Epson Photo R220 and an Epson C60. The OS is 10.4.8. Several days ago I reset my printing (using the printer setup utility) and then tried to reload the Epson drivers. The drivers from Epson would not load. The only drivers that do load are the ones that apparently come with the OS and are labeled with ' ... Gimp-print v5.0.0-beta2'. These drivers do not produce the same quality of printing as the Epson drivers I had before.
Downloading the most recent driver from Epson did not help, neither did any order of resetting the printer utility, re-installing, and rebooting the computer.
The gang at the local Apple Store could not solve the problem either!
Any suggestions?

Thanks for your reply.
What I came to was that I needed to uninstall the direct usb driver set up I had made for my printer and then start from scratch. While I was doing this (which turned out to be very difficult) with an HP tech he mentioned an HP wireless printer that he thought would work much better for what I wanted.
So I exchanged the HP officejet Pro 5400 for a DeskJet 6980 and this is a great solution, because I don't even have to connect through the Airport with a USB cable. It's all wireless and the quality of the printer is good and price is reasonable. Set up was difficult but HP has good tech support even for mac and they helped me out.
Now if any in my office wants to add this printer it's available as a bonjour printer and they don't even have to load to drivers.

HP Personal Media Drive hd0000 Not Loading

Hi can anyone please help
I have a HP Personal Media Center M7000 PC on windows XP.
It comes with a Personal Media Drive HD0000.
I have always kept the media drive in its internal docking station within the PC as it can be removed by sliding the cassette in and out of the body of the PC.
I recently had start up issues with my PC where it was failing to boot. After removing the the media drive the pc is back in working order without any problems but ever since the media drive is failing to load.
I have tried to load it in its docking station and via USB with this PC and i have also tried to load it via USB with a laptop i have on windows 7.
The media drive has some very personal items on it so can anyone please help me thank you in advance
UPDATE i have tried to connect the drive to my laptop on windows 7 and it does not load but it is now showing up instead of showing up under the computer section it shows up under control panel/ hardware and sound/ printer and devices. But it still will not load ARRRRGHHH any advice please thank you

One should be able to see the files on the HP Personal Media drive, if it still works. With the drive out of the bay, it requires a USB cable and a power connection. Examine the back of the drive. You will see a power connection right next to the USB connector. HERE is some info on the adapter but it does not have to be that one exactly. Any 12vDC 1 to 2 Amp supply that fits the jack should be able to power it.
BTW: if the drive was causing problems in the drive pocket on the WinXP PC, it could have a problem.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

[SOLVED] Many modules are not loaded in the Arch USB key installation.

Hello!
I installed Arch Linux on my USB key. I did it few months ago and it worked, I had portable arch.
Yesterday I decided to make a fresh installation. Unfortunately after booting it from my USB key
most of the modules were not loaded. Because of that I couldn't start the X server and connect to
the internet (ethernet card was not detected).
Even after loading the module which corresponds to my ethernet card manually (modprobe e1000e) it was not
displayed in the lsmod list.
I though "maybe I screwed something up during the installation?". To find out I used GParted to copy
my OS partition (perfectly working Arch Linux installed on the hard drive) to the USB key. Of course I changed the UUID of the USB partition.
After booting it I was suprised because the situation did not change - modules that are loaded on my main system for some
reason were not loaded on it's exact copy placed on the USB key.
I have no idea why my portable OS is acting like this.
Commands below were executed on another PC so don't look for the e1000e module.
$ lsmod
Module Size Used by
ext4 474699 2
crc16 1367 1 ext4
mbcache 6082 1 ext4
jbd2 83440 1 ext4
usb_storage 48007 2
ata_generic 3378 0
pata_acpi 3395 0
hid_generic 1161 0
usbhid 40577 0
hid 90742 2 hid_generic,usbhid
sr_mod 14898 0
cdrom 34848 1 sr_mod
sd_mod 30821 3
pata_atiixp 4819 0
ehci_pci 4000 0
ohci_pci 4040 0
ohci_hcd 23905 1 ohci_pci
ehci_hcd 59252 1 ehci_pci
usbcore 180104 6 usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
ahci 23056 0
libahci 21642 1 ahci
usb_common 1656 1 usbcore
libata 171112 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
scsi_mod 130669 4 usb_storage,libata,sd_mod,sr_mod
nouveau 904702 0
button 4677 1 nouveau
video 11196 1 nouveau
mxm_wmi 1475 1 nouveau
wmi 8419 2 mxm_wmi,nouveau
i2c_algo_bit 5399 1 nouveau
drm_kms_helper 36254 1 nouveau
ttm 63507 1 nouveau
drm 238238 3 ttm,drm_kms_helper,nouveau
i2c_core 24164 4 drm,drm_kms_helper,i2c_algo_bit,nouveau
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
$ lspci #Just a fragment
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at de00 [size=256]
Memory at fdaff000 (64-bit, prefetchable) [size=4K]
Memory at fdaf8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 07-00-00-00-68-4c-e0-00
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
$ cat /var/log/Xorg.0.log
[ 59.424]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 59.424] X Protocol Version 11, Revision 0
[ 59.424] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 59.424] Current Operating System: Linux sanguine 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64
[ 59.425] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2c39c1f9-de3e-4907-93dc-8b77422a07a1 rw
[ 59.425] Build Date: 09 January 2014 08:47:24AM
[ 59.425]
[ 59.425] Current version of pixman: 0.32.4
[ 59.425] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.425] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.425] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 13 12:55:56 2014
[ 59.433] (==) Using config file: "/etc/X11/xorg.conf"
[ 59.433] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 59.437] (==) ServerLayout "Layout0"
[ 59.437] (**) |-->Screen "Screen0" (0)
[ 59.437] (**) | |-->Monitor "Monitor0"
[ 59.441] (**) | |-->Device "Device0"
[ 59.441] (**) |-->Input Device "Keyboard0"
[ 59.441] (**) |-->Input Device "Mouse0"
[ 59.441] (==) Automatically adding devices
[ 59.441] (==) Automatically enabling devices
[ 59.441] (==) Automatically adding GPU devices
[ 59.456] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 59.456] Entry deleted from font path.
[ 59.456] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 59.456] Entry deleted from font path.
[ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 59.457] Entry deleted from font path.
[ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 59.457] Entry deleted from font path.
[ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 59.457] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 59.457] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.457] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 59.457] (WW) Disabling Keyboard0
[ 59.457] (WW) Disabling Mouse0
[ 59.457] (II) Loader magic: 0x804c80
[ 59.457] (II) Module ABI versions:
[ 59.457] X.Org ANSI C Emulation: 0.4
[ 59.457] X.Org Video Driver: 15.0
[ 59.457] X.Org XInput driver : 20.0
[ 59.457] X.Org Server Extension : 8.0
[ 59.459] (--) PCI:*(0:1:5:0) 1002:796e:1458:d000 rev 0, Mem @ 0xd8000000/134217728, 0xfdfe0000/65536, 0xfde00000/1048576, I/O @ 0x0000ee00/256
[ 59.459] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 59.460] Initializing built-in extension Generic Event Extension
[ 59.460] Initializing built-in extension SHAPE
[ 59.460] Initializing built-in extension MIT-SHM
[ 59.460] Initializing built-in extension XInputExtension
[ 59.461] Initializing built-in extension XTEST
[ 59.461] Initializing built-in extension BIG-REQUESTS
[ 59.461] Initializing built-in extension SYNC
[ 59.461] Initializing built-in extension XKEYBOARD
[ 59.461] Initializing built-in extension XC-MISC
[ 59.461] Initializing built-in extension SECURITY
[ 59.461] Initializing built-in extension XINERAMA
[ 59.461] Initializing built-in extension XFIXES
[ 59.461] Initializing built-in extension RENDER
[ 59.461] Initializing built-in extension RANDR
[ 59.463] Initializing built-in extension COMPOSITE
[ 59.466] Initializing built-in extension DAMAGE
[ 59.468] Initializing built-in extension MIT-SCREEN-SAVER
[ 59.470] Initializing built-in extension DOUBLE-BUFFER
[ 59.472] Initializing built-in extension RECORD
[ 59.475] Initializing built-in extension DPMS
[ 59.477] Initializing built-in extension Present
[ 59.479] Initializing built-in extension DRI3
[ 59.481] Initializing built-in extension X-Resource
[ 59.483] Initializing built-in extension XVideo
[ 59.485] Initializing built-in extension XVideo-MotionCompensation
[ 59.487] Initializing built-in extension XFree86-VidModeExtension
[ 59.490] Initializing built-in extension XFree86-DGA
[ 59.492] Initializing built-in extension XFree86-DRI
[ 59.494] Initializing built-in extension DRI2
[ 59.494] (II) LoadModule: "glx"
[ 59.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 60.382] (II) Module glx: vendor="NVIDIA Corporation"
[ 60.388] compiled for 4.0.2, module version = 1.0.0
[ 60.388] Module class: X.Org Server Extension
[ 60.388] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 60.401] Loading extension GLX
[ 60.401] (II) LoadModule: "nvidia"
[ 60.401] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 60.455] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 60.455] compiled for 4.0.2, module version = 1.0.0
[ 60.455] Module class: X.Org Video Driver
[ 60.462] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 60.462] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 60.464] (++) using VT number 1
[ 60.464] (EE) No devices detected.
[ 60.464] (EE)
Fatal server error:
[ 60.464] (EE) no screens found(EE)
[ 60.464] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 60.464] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 60.465] (EE)
Last edited by Skitter (2014-02-16 20:57:21)

Please post the output of:
dmesg -c
modprobe e1000e
dmesg

Pioneer DVD -RW drive will not load CD/DVD media iMac Yosemite

I have a 20-inch, Early 2009 iMac that was recently updated with a SSD Drive and I ran all the installation media that cam with it originally.
I did update to the latest and greatest Mac OS Yosemite to recently discover that the Pioneer drive (see details below) will not load disks. Any disks. It makes that loading noise and it seems to struggle until it spits it out again.
I am pretty sure it worked since I have loaded Software from the Installation DVDs but I cannot confirm the if the problem started since Yosemite update. There may be a separate contributing factor, he is 2 year old and since he has seen Music CDs loaded there previously he was showing interest in poking thinks in the slot.
How can I identify the real problem? Is the drive faulty or is it some incompatibility with the system?
About this Mac > System report...
PIONEER DVD-RW DVRTS08:
Firmware Revision: Q81D
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose File > Refresh Information

Just wanted to add, I haven't even tried to burn yet obviously because I can't read anything so how am I going to burn right? LOL

64-bit driver does not load at boot

Hi.
After recompiling a scsi target driver for 64 bits, it does not load automatically at boot time as it does if booting 32-bit kernel.
The 64-bit module is copied to /usr/kernel/drv/sparcv9. the <driver>.conf file is in /usr/kernel/drv. Using add_drv is fine, it attaches and loads the driver (the driver works also).
It also loads using modload manually after boot or calling it from /etc/rc3 or so.
what else is required on 64-bit kernel to get the autoload?
Thanks,
Luis.

Hi.
After recompiling a scsi target driver for 64 bits, it does not load automatically at boot time as it does if booting 32-bit kernel.
The 64-bit module is copied to /usr/kernel/drv/sparcv9. the <driver>.conf file is in /usr/kernel/drv. Using add_drv is fine, it attaches and loads the driver (the driver works also).
It also loads using modload manually after boot or calling it from /etc/rc3 or so.
what else is required on 64-bit kernel to get the autoload?
Thanks,
Luis.

Multiple Firewire Drives Do Not Load to Desktop

Hi all,
I have been using several Firewire External drives with Avid Express Pro editing system. Over the past months several firewire drives have broken down on me, increasingly loosing functionality over a period of several weeks. I have now damaged 3 external drives - two were Lacie 800+400 Pin Firewire Drives, and just recently my G-Technology Firewire Drive has also broken down.
First the drives slow down on playback, then read/write time slow down. this happens when using Avid, Final Cut Pro, or when trying to simply copy files to the drive.
Now, my current G Tech Firewire Drive will not even load to the desktop, and Disk Utilities can not find it. I have tried using both 400, 800 pin fW, and USB 2. Problem continues. I have reset ram, run tech tools cd - no problems are found.
When I plug the Firewire Drive into my iBook laptop - it loads fine and runs normally! When I run Disk Utility from the iBook it says the Firewire drives
need no repairs!
I recently connected a friend's firewire drive that had never been used on my desktop and it loaded to my G5 just fine!
What is happening? Is my G5 desktop corrupting the drives as it writes to them? It clearly has something to do with how my computer is interacting with these FW drives. Is it a firmware issue?
I am under a pressing deadline, and can't let go of this desktop for service for over a week right now.
Any suggestions much appreciated! I'm desperate to get this going!
Thanks!

Hi Tom,
Thanks for the feedback. In all cases, I've been using FW drives on their own, not daisy changed. I've tried multiple FW cables as well to confirm that it is not the cables. These 3 different drives I've had problems with each have their own separate power supply, so I don't think that's the issue.
I'll try running a copy of DiskWarriror.
However, if it's an issue of directories on the drive, wouldn't the FW Drives not work on ALL computers? Why would it function fine on any computer other then my desktop?
Any more thoughts would be much appreciated!
Thanks,
Max

Vmware mouse driver is not loaded automatically in OL 5.x version by defau.

I have two questions on OL 5.8.
question1:
=======
I could see vmware video driver,bundled,/usr/lib64/xorg/modules/drivers/vmware_drv.so, but no vmware mouse driver is bundled on OL 5.8.
By the way, On OL 6.2, I could see both vmware video and mouse drivers.
Question 2
=======
Why no version information is shown from the following command?
# modinfo /usr/lib/xorg/modules/drivers/vmware_drv.so
Edited by: changhai on Mar 7, 2012 4:49 PM
Edited by: changhai on Mar 7, 2012 4:49 PM

Hello, Avi,
Sorry, let me clarify it again.
On RHEL 5.8/OL 5.8 , I could see vmware_drv and vmmouse_drv files. but on OL 5.8, by default, vmmouse_drv.so is not loaded.
Result on RHEL 5.8
============
[root@pek2-lab-08-dhcp158 ~]# cat /etc/issue
Red Hat Enterprise Linux Server release 5.8 (Tikanga)
Kernel \r on an \m
[root@pek2-lab-08-dhcp158 ~]# grep "vmware_drv" /var/log/Xorg.0.log
(II) Loading /usr/lib64/xorg/modules/drivers/vmware_drv.so <===vmware_drv is loaded.
[[root@pek2-lab-08-dhcp158 ~]# grep "vmmouse_drv" /var/log/Xorg.0.log
(II) Loading /usr/lib64/xorg/modules/input/vmmouse_drv.so <====vmmouse_drv is loaded.
result on OL 5.8
===========
[root@pek2-lab-08-dhcp84 ~]# cat /etc/issue
Oracle Linux Server release 5.8
Kernel \r on an \m
[root@pek2-lab-08-dhcp84 ~]# grep "vmware_drv" /var/log/Xorg.0.log
(II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so <====by default, vmware_drv is loaded; same with RHEL 5.8.
[root@pek2-lab-08-dhcp84 ~]# grep "vmmouse" /var/log/Xorg.0.log
[root@pek2-lab-08-dhcp84 ~]# <=====not same with RHEL 5.8.
[root@pek2-lab-08-dhcp84 ~]# grep "mouse" /var/log/Xorg.0.log
Using the default mouse configuration.
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so <====instead, normal mouse_drv is loaded.

[Solved]Virtualbox kernel module not loaded

I update my system today and when I try to run Virtualbox...
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.6.11-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.
I already had this trouble before and this was the fix
# modprobe vboxdrv
But it doesn't work anymore
Any ideas?
Edit: This just get fixed by itself when restaring my PC. Sorry
Last edited by ilq (2013-02-13 02:32:43)

fsckd wrote:
rc.conf is part of the deprecated init system. icebox is not using systemd and neglected to mention that.
Amarildo, see the wiki.
Thanks, it really helped. It's solved.

[SOLVED] Intel driver is not loading.

Similar Messages

Maybe you are looking for