[SOLVED] Where is application icon in window buttons XFCE panel locat?
I installed chromium but in windows buttons panel, didn't show chromium icon. It's show an square icon instead chromium icon and seems like it's default icon.
You see? Genymotion and Thunar and Panel Properties has a icon so where there icons location ?
Last edited by Vahids (2015-05-27 05:53:52)
I found this from source code:
tmp = netk_window_get_icon(win);
if (tmp) {
gint w, h;
w = gdk_pixbuf_get_width(tmp);
h = gdk_pixbuf_get_height(tmp);
if (w != 22 || h != 22) {
icon = gdk_pixbuf_scale_simple(tmp, 24, 24, GDK_INTERP_BILINEAR);
*unref_needed = g_list_prepend(*unref_needed, icon);
} else {
icon = tmp;
but i didn't understand! seems like it's scaling some icon. but I don't know what icon.
Last edited by Vahids (2015-05-27 05:30:11)
Similar Messages
-
[SOLVED] Active application icon is missed in top panel. Gnome 3.4.
Since i've updated the system today, i see that the icon of the active application, which used to be shown in the top panel, has been disappeared. I use gnome 3.4 from Extra, zukitwo theme and Faenza icon theme from AUR.
Here is an image: http://imageshack.us/photo/my-images/51 … e2012.png/
And the pacman log:
[2012-05-03 21:50] Running 'pacman -Syy'
[2012-05-03 21:50] synchronizing package lists
[2012-05-03 21:50] Running 'pacman -Syu'
[2012-05-03 21:50] synchronizing package lists
[2012-05-03 21:50] starting full system upgrade
[2012-05-03 21:51] Running 'pacman -Sy'
[2012-05-03 21:51] synchronizing package lists
[2012-05-03 21:51] Running 'pacman -U /tmp/yaourt-tmp-manuel/PKGDEST.NO3/zukitwo-themes-20120503-1-any.pkg.tar.xz'
[2012-05-03 21:51] upgraded zukitwo-themes (20120429-1 -> 20120503-1)
[2012-05-04 02:53] Running 'pacman -Syy'
[2012-05-04 02:53] synchronizing package lists
[2012-05-04 02:53] Running 'pacman -Syu'
[2012-05-04 02:53] synchronizing package lists
[2012-05-04 02:53] starting full system upgrade
[2012-05-04 02:54] upgraded babl (0.1.6-1 -> 0.1.10-1)
[2012-05-04 02:54] upgraded conky (1.8.2git20111107-2 -> 1.9.0-1)
[2012-05-04 02:54] upgraded gtk3 (3.4.1-1 -> 3.4.2-2)
[2012-05-04 02:54] upgraded ttf-freefont (20100919-2 -> 20120503-1)
I'm not even sure if it is the correct behaviour or an error.
I tried other icon themes with the same result.
Thanks in advance and sorry if my english is not good enough.
Last edited by Slab (2012-05-04 16:17:34)I deliberately removed that from the shell theme. My plan was to remove the entire thing because I find it useless, but in the end I thought a bit of typography there wasn't such a bad thing. The icon however I find hideous looking. To get the icon back you can open the gnome-shell.css file in Zukitwo-Shell/gnome-shell/ and remove height and width from this:
.panel-button #appMenuIcon {
app-icon-bottom-clip: 0px;
height: 0px;
width: 0px;
Also change this to 24px instead of 0.
.app-menu-icon {
width: 0px;
height: 0px;
Last edited by lassekongo83 (2012-05-04 10:29:11) -
I upgraded my Iphone 4 to os7 and not all of my application icons are visible. I can locate them using the search feature but I would like to have the icons visible on my screen for imediate access. So how do I do this?
They got pushed to another page of the Home screen. Scroll from left to right to find them. You can then move them to where you want them.
-
Hello,
I am desperately trying to set the gvim icon file for the xfce panel(faenza icon theme to be precise), but without any luck. I have tried to edit the gvim.desktop situated in /usr/share/applications/. I obviously edited the icon key, but without any luck either. I have tried full path and with only the name. I even tried to find the old icon to try and delete it, but gvim really seems stubborn.
What have I missed ?
Thank you in advance for any responseLaertes wrote:In which file are the panel settings saved?
$XDG_CONFIG_HOME/xfce4/panel. -
Where has my airport utility window gone? When I double click on the airport utility icon all I get is a picture of a globe and a base station with no further options available to modify my airport extreme.
Sorry, you lost me on that last post.
Let's start over again.
Open AirPort Utility on your Mac
Are you asked for a password at this point? If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
You need that password to be able to access the settings for the AirPort router in AirPort Utility.
If you see a window listing basic information, click Edit in the upper right corner of the window.
If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
If you forgot the password, a Soft Reset will allow you to go in and reset the base station password. Might be a good idea to write down that password.
If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button. -
Where is the 'Search Acrobat Windows Forum' button?
I've largely dropped out of this forum since it changed format (no particular reason, I can see the improvements, but it just seemed to take a bit more time to review and do things), so maybe I'm being dense with my subject line? The first thing I usually want to do when I enter a forum is search for a topic that may answer my question already, but all I see are options to search Adobe globally (no thanks) or all forums (no, I'm in the Acrobat forum because I have an Acrobat question). Once I've returned a list that uselessly includes all forums I get a new Search bar and a dropdown list of Adobe applications, so then I can narrow it down, but I've already used my daily allocation of mouse clicks and am losing interest. Am I missing something?
Bon dias,
You are at "top" of Acrobat Windows Forum.
Enter a string in the Search field.
Click the button at the right.
Wait a moment.
Search returns are presented from all Forums.
Click "More options" (under Search for: <you query string>
Observe the "Where" List.
Select Acrobat Windows (nested under Acrobat) - this is the third line item from the top.
If desired - provide a "When" &/or a "Who" filter.
Click the Search button again.
Search Results are listed for your query string from the Acrobat Windows Forum.
Retain the list by opening a new Tab in your browser when viewing a result.
Review the Search Tips to learn more about what is available with this particular search engine.
While search engines share many features in common, often they do no process the feature exactly the same.
In sum - rather adequate search of specific forums is available.
We might natter about the user interface but for most queries, the forum search is adequate.
Be well... -
Somehow my application icon in the dock has disappeared. I have no idea where it went but it contains all my applications that i use. How do I get the application icon to return to the dock. Thanks for your help. I am not computer literate by any means. Thanks
Goto your application folder, find your app then drag/drop it back to the dock.
-
[SOLVED] xfce4-panel: Window buttons w/ Compiz
Hi, I've successfully done the seemingly daunting task of getting Compiz to work with XFCE. Everything appears to be set up, got my keyboard shortcuts in order, etc., however I don't like how the xfce4-panel's Window Buttons behave when running with Compiz. I have specifically set it to show only windows visible on the current desktop (or as Compiz calls it, viewports), but it looks like it still shows all windows from all viewports, as if like it treats all of them as one big desktop. I know this is a problem with xfce4-panel still thinking that it's communicating with xfwm, but I do like to resolve this annoying pet peeve. Are there any workarounds/fixes/patches for this that could help? Thanks in advance.
Last edited by qtcaroline22 (2012-05-17 01:53:05)I made Compiz autostart with XFCE using the first method with the Fusion icon as described in Compiz's Arch Wiki article. Perhaps it is related to Xfwm and Compiz running together? I'll try the other methods and see if the problem persists.
EDIT: I fixed it, I just followed the solution on this thread and everything works perfectly now. Seems like Googling with the right keywords will almost always point me to the solution.
Last edited by qtcaroline22 (2012-05-17 01:52:14) -
how you decide and remove application icon from the dock? i have new iMac and i expect it works like macbook pro i own. whre is my aplication icon and where is my disc acsses. are you ******* kidding me ? where are this things?
mozac --
We're all just other Mac users here, volunteering to help each other. So, you want to take a deep breath and settle down?
To put the application folder back in the dock, open up the Finder from the dock. Grab the Applications from there, and drag it into your dock.
I don't know what disc acsses means. -
Hi. Im using XFCE 4 and i install the Sublime 2 like here (the second method) but when im running it, in the application bar it doesn't shows the icon of sublime. Also when im going to "Open file" or some else menu , it doesn't shows known icons of files/buttons. E.g In this dialog window (open file) the Cancel and Open buttons have an icon with a red X on them. It seems that this application cannot find the systems icons and it's own.
First time i have a problem like this. With the previous version of sublime all worked perfect.
Any idea, on where to look ?
Thanks!Nothing changed. Can someone tell me how can i debug this ? How can i search to solve this ?
Here are some pics for what i mean
As you can see there are no app icon , folder and files icons.
From where did it loads them ? -
Need Help On this(solve these 2 applications)
Hello All,
Find below the questions for Snooker scoreboard application programming in java and second one is an applet. Please solve the two applications and send me the code immediately to [email protected] and [email protected] .
I have the exam tomorrow and any help regarding this is appreciated.
1)
UNIVERSITY OF SUNDERLAND
SCHOOL OF COMPUTING AND TECHNOLOGY
MODULE CODE: COMM3C
MODULE TITLE: Java Network Programming
MODULE ASSESSOR: Adrian Wadsworth
ASSESSMENT: One of Two (Referred/Deferred)
TITLE OF ASSESSMENT: Individual Assignment Snooker Scoreboard Application (4 pages)
MODERATED: May 2006
PLEASE READ ALL INSTRUCTIONS AND INFORMATION CAREFULLY.
This assignment contributes 50% to your final module mark.
Please ensure that you retain a duplicate of your assignment. We are required to send samples of student work to the external examiners for moderation purposes. It will also safeguard in the unlikely event of your work going astray.
THE FOLLOWING LEARNING OUTCOMES WILL BE ASSESSED:
Knowledge of:
a. Critical awareness of the issues and problems associated with the development of programs to run in a networked environment �9
b. Critical understanding of the Java and the web �9
c. Architectural issues of relating to distributed systems
d. Critical awareness of network programs and network protocols �9
and ability to:
e. Design and implement a Java applet or application �9
f. Critically evaluate network technologies for specific requirements
g. Design test a Java based on-line systems �9
h. Work as part of a team to develop a component based system.
i. Use and critically evaluate Software Engineering tools �9
IMPORTANT INFORMATION
You are required to submit your work within the bounds of the University Infringement of Assessment Regulations (see your Programme Guide). Plagiarism, paraphrasing and downloading large amounts of information from external sources, will not be tolerated and will be dealt with severely. Although you should make full use of any source material, which would normally be an occasional sentence and/or paragraph (referenced) followed by your own critical analysis/evaluation. You will receive no marks for work that is not your own. Your work may be subject to checks for originality which can include use of an electronic plagiarism detection service.
Where you are asked to submit an individual piece of work, the work must be entirely your own. The safety of your assessments is your responsibility. You must not permit another student access to your work.
Where referencing is required, unless otherwise stated, the Harvard referencing system must be used (see your Programme Guide).
Submission Date and Time Before 4pm, Friday 1st September 2006
Submission Location LRC, Reg Vardy Centre, St Peters Campus
Java Network Programming (COMM3C)
Assignment 1 (Referred/Deferred) May 2006
Snooker Scoreboard Application
This assignment is designed to consolidate the knowledge of the Java programming language you have gained in the first half of the course and to develop your skills in using basic Java input/output facilities, designing graphical user interfaces and implementing client-server systems.
The Application (70 marks)
You will develop a client/server based scoreboard application which will present and log the activity of a snooker match which may comprise a maximum of 15 frames. Your application must be capable of performing the following functions:
(a) Displaying the current score of each player for the current frame.
(b) Displaying the break for the player currently at the table.
(c) Displaying a record of the sequence of balls potted with their values during each break for each player during the current frame.
(d) Logging, and ultimately storing on a floppy disc in drive A, a record of the sequence of events occurring during a frame. This would include: fouls committed, balls potted with their values and which player potted them for each frame completed. This is intended to provide the definitive record for the frame. Note that, with the exception of player names, match identification and the date, no other information (such as the frame score) should be stored on disc.
(e) Recalling a frame's record from disc. The application must be able to process the data recalled from disc for any chosen frame and provide the following information:
i) the frame score and the highest break for each player,
ii) the number of points conceded as fouls by each player,
iii) the number of times each player visited the table,
vi) the number of times each colour ball (not reds or free balls) was
v) potted in the frame as a whole by each player.
The application must be developed as a client/server system using the loopback address so the client and the server can be run on the same computer.
The client will include the graphical User Interface (GUI) which will facilitate the entry of player names, a method of scoring, a method of displaying all required information and interaction with the server to allow data to be sent to it and recalled from it. See above for detailed requirements.
The server must facilitate the storage to and retrieval from floppy disc of match data and interaction with the client. The server need only be capable of interacting with a single client.
The Application (continued)
In addition to your report (see next page), you must submit a 3.5 inch virus checked floppy disc (CD's are NOT acceptable) which must contain four folders, described below, and nothing else.
Folder 1: The clientSource folder. Must contain all client source files and nothing else.
Folder 2: The clientClass folder. Must contain all client class files and nothing else.
Folder 3: The serverSource folder. Must contain all server source files and nothing else.
Folder 4: The serverClass folder. Must contain all server class files and nothing else.
Any number of client classes may be developed, but the class containing the client's main method must be called client. Any number of server classes may be developed, but the class containing the server's main method must be called server.
All applications must be executable directly from the command prompt window, without the use of an additional Integrated Development Environment such as Eclipse or JBuilder. You must clearly identify which version of Java you have used to develop your application.
Note that it will not be possible for you to include class files corresponding to source files which do not compile correctly. You must, however, include all of your source files in the appropriate folder regardless of whether or not they compile.
You should place the floppy disc in a small envelope and tape it to the front sheet of your report so that no text on the front sheet is obscured. Do not apply tape to the disc itself.
Report Submission Details (30 marks)
Your report must contain the following elements:
(a) a well commented source listing of the application source code (whether functional
or not). Note that sections of code which do not function correctly should be clearly identified by the words "NOT FULLY FUNCTIONAL" and accompanied by a brief hand written explanation of the problem.
(b) a maximum of four screen shots showing the application in action
(c) a conclusion, with clearly marked sub-headings, which must include:
i) a clear statement of the extent of the application's functionality,
ii) a brief explanation of how to use your version of the application,
iii) a description of how you have made the application robust,
iv) any other commentary that you feel is relevant.
Your report must be presented on A4 sheets of paper which must be stapled together at the top left corner to allow access to all of the report�s contents without removing the staple.
If your report is too thick to be secured using a staple, punch a hole in the top left corner and bind the pages together with a treasury tag.
Your report must not be submitted in any type of cover or folder.
Your name, my name and the module number must be clearly displayed on the front sheet of your submission.
No other information, designs or motifs should appear on the front sheet.
Note that all the pages of this assignment must be submitted with your report and must immediately follow the front sheet.
Your report must NOT be submitted electronically and must NOT be included on your floppy disc.
Failure to comply with the requested report and floppy disc submission format will result in the allocation of a significantly reduced mark.
A.Wadsworth
2)UNIVERSITY OF SUNDERLAND
SCHOOL OF COMPUTING AND TECHNOLOGY
MODULE CODE: COMM3C
MODULE TITLE: Java Network Programming
MODULE ASSESSOR: John Tindle
ASSIGNMENT Two of Two (Referred/Deferred)
TITLE OF ASSIGNMENT: Java Media Player
MODERATED: May 2006
PLEASE READ ALL INSTRUCTIONS AND INFORMATION CAREFULLY.
This assignment contributes 50% to your final module mark.
Please ensure that you retain a duplicate of your assignment. We are required to send samples of student work to the external examiners for moderation purposes. It will also safeguard in the unlikely event of your work going astray.
THE FOLLOWING LEARNING OUTCOMES WILL BE ASSESSED:
Knowledge of:
a. Critical awareness of the issues and problems associated with the development of programs to run in a networked environment �9
b. Critical understanding of the Java and the web �9
c. Architectural issues of relating to distributed systems
d. Critical awareness of network programs and network protocols �9
and ability to:
e. Design and implement a Java applet or application �9
f. Critically evaluate network technologies for specific requirements �9
g. Design test a Java based on-line systems �9
h. Work as part of a team to develop a component based system.
i. Use and critically evaluate Software Engineering tools �9
IMPORTANT INFORMATION
You are required to submit your work within the bounds of the University Infringement of Assessment Regulations (see your Programme Guide). Plagiarism, paraphrasing and downloading large amounts of information from external sources, will not be tolerated and will be dealt with severely. Although you should make full use of any source material, which would normally be an occasional sentence and/or paragraph (referenced) followed by your own critical analysis/evaluation. You will receive no marks for work that is not your own.
Where you are asked to submit an individual piece of work, the work must be entirely your own. The safety of your assessments is your responsibility. You must not permit another student access to your work.
Where referencing is required, unless otherwise stated, the Harvard referencing system must be used (see your Programme Guide).
Submission Date and Time Before 4pm, Friday 1st September 2006
Submission Location LRC, Reg Vardy Centre, St Peters Campus
Module COMM3C Java Network Programming
Assignment 2 (Referred/Deferred) May 2006
Java Media Framework
Part 1 Research Topics
The Java Media Framework API (JMF) enables audio, video and other time-based media to be added to applications and applets built on Java technology. This optional package, which can capture, playback, stream, and transcode multiple media formats, extends the Java 2 Platform, Standard Edition (J2SE) for multimedia developers by providing a powerful toolkit to develop scalable, cross-platform technology.
The aim of this assignment is to develop the skills required by a network systems developer so that they are able to incorporate standard Java components code into their own projects.
Here is a link the JMF website
http://java.sun.com/products/java-media/jmf/
JMF documentation
http://java.sun.com/products/java-media/jmf/reference/docs/index.html
JMF code examples
http://java.sun.com/products/java-media/jmf/reference/codesamples/index.html
JMF Documentation
http://java.sun.com/products/java-media/jmf/2.1.1/specdownload.html
Download and read the JMF API Guide
https://sdlc3a.sun.com/ECom/EComActionServlet;jsessionid=1BA18CD12B4C0D0DEC445DAAD5522248
Research the topics given in Part 1 and answer the questions listed below.
Describe the structure and mode of operation of the JMF in your own words.
Describe in your answer Controller Event (ref p30 JMF API Guide)
Describe in your answer Standard Controls (ref p20 JMF API Guide)
Describe in your answer Presenting RTP Media Streams (ref p68 JMF API Guide)
Describe in your answer Capturing Time Based Media (ref p77 JMF API Guide)
Describe what is meant by a Media Processor and a Media Player. How do they differ?
Part 2 SimplePlayerApplet.java
Download the Java Applet, modify the source code and add it to a package within a Java Project. Recompile the Applet using JBuilder. Please refer to the following two links:
Code examples
http://java.sun.com/products/java-media/jmf/reference/codesamples/index.html
SimplePlayerApplet.java
http://java.sun.com/products/java-media/jmf/2.1.1/samples/samples/SimplePlayerApplet.java
Download the JMF library and add it to the JBuilder IDE using the Project Properties function.
Download the JMF library using this link
http://java.sun.com/products/java-media/jmf/2.1.1/download.html
Describe how you developed the applet SimplePlayerApplet.java
Describe how you tested SimplePlayerApplet.java.
Use the JB Builder/Designer tool to add two buttons to a Frame to start and stop the AppletPlayer.
Upload the Applet online to your CET website.
Set the access rights so that the Applet will run online via browser.
Test the Applet using a browser.
Provide screenshots to prove the Applet runs satisfactorily online.
Here is a link to view the operation of the JMF Player
http://osiris.sunderland.ac.uk/~cs0jti/NetSys/website/data-archive/COMM3C-JavaNP/JavaMediaFramework/SimplePlayerApplet/classes/
To run the Applet click on SimplePlayerApplet.html
To run this applet in your browser you must install the Java Runtime Environment and the JMF.
http://java.sun.com/j2se/1.4.2/download.html
To run the Applet it is also recommended that a codec pack is installed.
Here is a link to freecodecs.com
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
The following codec packs have been found to work satisfactorily with the JMG Applet.
Install either the (i) K-Lite Code Pack or the (ii) XP Codec Pack
Note - Do not install both codec packs at the same time.
Video clips may be found at this URL
http://osiris.sunderland.ac.uk/~cs0jti/NetSys/website/data-archive/COMM3C-JavaNP/JavaMediaFramework/
Tests have shown that the following files are compatible with the JMF Player,
1 - eng.avi
2 - movie.mpeg
3 - hvid.avi
Note
If any of the links given above are broken then students may find copies of this data stored at the following URL.
http://cet-netres-srv.sunderland.ac.uk/website/Archive2006/JMF/SimpleAppletPlayer/
Student Report Structure
1. Write and submit an original report relating to the design of your Java application.
2. Provide a printed report. Your mark will primarily be obtained from your printed report.
3. The contents of the report must be completely original, this includes text, diagrams and any simple examples.
4. Students are required to submit a disk with their JBuilder Java Projects.
5. Students must put their disk in an envelope and attach it their report.
6. If the disk is directly sellotaped to the report their project code will be allocated a mark of 0.
7. The report submitted must not exceed the page count excluding the front sheet and index.
8. Students should print on just one side of the paper.
9. Staple your report at the top left hand corner.
10. Do not use plastic folders or envelopes that must be taken apart and reassembled.
11. Required font type Arial or Times Roman and size 12.
12. To obtain high marks students must present work that has a high technical content with clear diagrams and a good standard of original English (your own work), that is not taken from standard textbooks, papers or websites.
13. Students should provide good references and link them with the text and diagrams in the main body of their report. All text that is extracted and added from another source, such as the web, must be identified using bold italics. The total amount of text added that is not original must not exceed 5% of the total.
14. Penalties will be incurred for the following
No name on disk
No name on report
Disk Sellotaped to report
Report in a plastic folder
JB project is incomplete or will not compile.
Moderated by MSc Moderation Panel May 2006
Reference: jmf-2006-v4-modified.htm
A copy of this assignment may be found online at URL
http://osiris.sunderland.ac.uk/~cs0jti
Name
Frontpage 1 side of A4 Index 1 side of A4
Part 1 Research into JMF 4 sides of A4 Marks 30
Controller Event
Standard Controls
Presenting RTP Media Streams
Capturing Time Based Media
Player vs processor
JMF Plug-ins
Part 2 SimplePlayerApplet.java 3 sides of A4 Marks 60
Link for application
Description of development
Start and Stop buttons
Description of testing
Online test � applet works
Screenshots
JB project loads
JB code runs - 20 marks
References 1 side of A4 Marks 10
List of references
Correct use of refs in main text
2)Plagiarism, paraphrasing and downloading largeamounts of >information from external sources, will
not be tolerated and will be >dealt with severely.
You will receive no marks for work that is not yourown. Your work may >be subject to checks for
originality which can include use of an >electronic
plagiarism detection service.Hey, the OP didn't read the rest of the assignment so why should they read that part? -
"X" window button does not quit Skype
Hi all!
There seems to be some minor malfunction in the way the window buttons on the upper right corner works: instead of quitting the program, it merely closes the window. This could be interesting, were it not for the fact that there is another button, traditionally used for minimising windows (the "_" button).
Also, it seems that "close" from the menu also fails to quit the program.
I'm sure that this mistake will be fixed shortly. If you need, we can probably help you to find the faulty link (it's most certainly a faulty reference, where "quit" has been erroneously spelled "minimise").
Best regards, JJEE
Solved!
Go to Solution.This issue has been discussed several hundred times on this Forum. This feature is by design. The Close button doesn't shut Skype down but only sets Skype in the background. The only way to shut Skype down is by right-click on the taskbar or tray icon and select Quit.
-
IPhone Application With 2 Windows
I am trying to create an iPhone application with 2 windows. However - I do know how to exactly. Does anyone know where to find a tutorial or example?
My other window created is always null.To make the following example, start a new project with the Window-based App Template and name it TwoWin:
// TwoWinAppDelegate.h
@interface TwoWinAppDelegate : NSObject <UIApplicationDelegate> {
UIWindow *window;
UIWindow *window2;
@property (nonatomic, retain) IBOutlet UIWindow *window;
@property (nonatomic, retain) IBOutlet UIWindow *window2;
- (IBAction)switchWindow;
@end
// TwoWinAppDelegate.m
#import "TwoWinAppDelegate.h"
@implementation TwoWinAppDelegate
@synthesize window;
@synthesize window2;
- (IBAction)switchWindow {
NSLog(@"%s:
window=%@
window2=%@", _func_, window, window2);
if (window.keyWindow) {
[window2 makeKeyAndVisible];
window.hidden = YES;
window2.hidden = NO;
else {
[window makeKeyAndVisible];
window.hidden = NO;
window2.hidden = YES;
NSLog(@" window.keyWindow=%d window2.keyWindow=%d",
window.keyWindow, window2.keyWindow);
- (void)applicationDidFinishLaunching:(UIApplication *)application {
[window makeKeyAndVisible];
window2.hidden = YES;
- (void)dealloc {
[window2 release];
[window release];
[super dealloc];
@end
MainWindow.xib looks like this (when the "View Mode" is in the Center position so a two column table is displayed with the view hierarchy as a tree of small icons to the left):
File's Owner -- UIApplication
First Responder -- UIResponder
Two Win App Delegate -- TwoWinAppDelegate
Window -- UIWindow
......View -- UIView
............Rounded Rect Button (Switch1) -- UIButton
Window2 -- UIWindow
......View2 -- UIView
............Rounded Rect Button (Switch2) -- UIButton
The XIB connections:
File's Owner:
......'delegate' outlet to App Delegate
App Delegate:
......'window' outlet to Window
......'window2' outlet to Window2
Rounded Rect Button (Switch1):
......'Touch Up Inside' to App Delegate: switchWindow
Rounded Rect Button (Switch2):
......'Touch Up Inside' to App Delegate: switchWindow
The View1 and View2 frames are manually set to full-screen less status bar since no view controllers are used in this example. E.g., for iPhone, set these frames to (0, 20, 320, 460) in the Size Inspector. It's also helpful to set View1 and View2 to different background colors in the Attributes Inspector.
- Ray -
I have a Macbook Pro with iphoto '08 running on Mac OS X version 10.5.8. I used to be able to go to my pictures folder on my HD and access my pictures via that iphoto library folder. There used to be a small arrow next to the iphoto icon with all the albums then listed within the folder (to the right). That arrow is now gone and all I have is the iphoto application icon which just reopens iphoto when I click on it, but I want to be able to access the data files. Somehow I do have files btwn 2008 and 2009 but it hasn't created these since then...Could someone please help me to restore this ability? I have read other similar posts but they seem to be related to lost data all together and I do luckily have all my pictures in iphoto still. I just can't access them in the pictures folder which means I can't access them on my external hard drive. I am now out of start up disc space somehow so I figured I had to delete some albums (I have 12,090 pictures) and do have them backed up but want to make sure I can go back for them when I need them. I did export all the pictures to a folder on the hard drive but it is all 12,090 in one long list with only numbers as names and not in any order, this will be a nightmare to access later! Please help! Thank you!
You can’t open your current photo library using this version of iPhoto.
That indicates that that is your library. Put it in your Pictures folder if it already isn't there and make sure it's named "iPhoto Library". It should look like this:
Now launch iPhoto with the Option key held down and select that library to open. If you get that same message close iPhoto and try the following;
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
Today out of the blue Photoshop will no longer maximize a window minimized to the application icon.
I have tried resetting the .plist file and resetting Photoshop neither have solved the problem.
I can long click on the icon and see and open the minimized window like Expose but that's the only way I can maximize the window.
All other apps work fine. It's just Photoshop.
Any assistance would be greatly appreciated.Please post the solution so it will help others, and mark this topic as "solved" so it is easier to track the status when browsing the forum.
Maybe you are looking for
-
When I try to go on to the YouTube site I get a message from Firefox that says: ''''''''* * The connection has timed out * * The server at www.youtube.com is taking too long to respond. * * The site could be temporarily unavailable or too busy. Try a
-
Revision: 2142 Author: [email protected] Date: 2008-06-18 15:17:01 -0700 (Wed, 18 Jun 2008) Log Message: swfutils: Somehow a Java 1.5 API (Integer.valueOf(int)) slipped into the 30x branch, and has only sporadically caused build problems. * By "someh
-
I am currently using Illustrator CS4 on Windowd XP. I am reasonably new to Illustrator having been a Corel user for the last 10 years, so I apologise if this is a simple request. I have imported a raster image into illustrator and I would like to kno
-
Does an image entered into the State Button always to become a background image?
-- thus loosing all scaling etc .... must I make the images the exact size for the button or can I add an image somehow without it scaling up and becoming a background image?
-
Problem loading page windows - Version 3.6.13 is this a virus?
When using Firefox I go to my home page when it opens but each time I try to open a new page multiple windows pop up with an error message: Problem Loading Page Firefox can't find the file at /C:/Program Files/Mozilla Firefox/9Úº%01˜%1Cm:ÙËÅȵ®Ö¯AÐóq