[SOLVED]wpa_supplicant.service won't load properly at boot
Hello everyone,
When I boot my Wi-Fi does not work. That's because wpa_supplicant.service has not loaded correct.
Systemctl status wpa_supplicant.service gives this output:
wpa_supplicant.service - WPA supplicant
Loaded: loaded (/usr/lib/systemd/system/wpa_supplicant.service; disabled)
Active: failed (Result: exit-code) since Mi 2013-12-18 14:17:20 CET; 53min ago
Process: 1793 ExecStart=/usr/sbin/wpa_supplicant -u (code=exited, status=203/EXEC)
Main PID: 1793 (code=exited, status=203/EXEC)
CGroup: /system.slice/wpa_supplicant.service
Now I see that wpa_supplicant -u exited with Status 203. If i now open a Terminal, login as root and execute
wpa_supplicant -u
everything works fine.
Now I don't know where to look next for my problem (Is it a DBUS fault? Or Systemd? Or wpa_supplicant? Or NetworkManager???)
I'm using NetworkManager with Gnome 3.10.
Thanks in advance
Last edited by remggo (2013-12-18 18:44:46)
$systemctl --state=failed
UNIT LOAD ACTIVE SUB DESCRIPTION
[email protected] loaded failed failed dhcpcd on wlp2s0
wpa_supplicant.service loaded failed failed WPA supplicant
So apperently dhcpcd also failed. Status dhcpcd:
[email protected] - dhcpcd on wlp2s0
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since Mi 2013-12-18 14:06:59 CET; 4h 30min ago
Process: 346 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Wpa_supplicant status:
wpa_supplicant.service - WPA supplicant
Loaded: loaded (/usr/lib/systemd/system/wpa_supplicant.service; disabled)
Active: failed (Result: exit-code) since Mi 2013-12-18 14:17:20 CET; 4h 24min ago
Process: 1793 ExecStart=/usr/sbin/wpa_supplicant -u (code=exited, status=203/EXEC)
Main PID: 1793 (code=exited, status=203/EXEC)
CGroup: /system.slice/wpa_supplicant.service
When I run journalctl it can't find any entry with dhcpcd or wpa_supplicant in it
Last edited by remggo (2013-12-18 17:42:37)
Similar Messages
-
[SOLVED] My machine won't load uuid on boot.
I recently ran the following to update my machine. I found it here since I was having the issue that started the thread
pacman -Syu --ignore filesystem
pacman -Su
I then ran pacdiff and made sure all my config files were in order. Unfortunately I believe this updated grub as well as potentially linux. I didn't run mkinitcpio or recreate my grub.cfg. Now I get the following error when I try to boot:
ERROR: device 'UUID=f3f3aeaa-0e59-4092-95fb-df1d768e966d' not found. Skipping fsck
ERROR: Unable to find root device 'UUID=f3f3aeaa-0e59-4092-95fb-df1d768e966d' .
You are being dropped to a recorvery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
I've been able to boot the machine with my live usb stick I created when I originally installed arch. After so doing, I was able to confirm the above UUID points correctly at the partition that I want to boot.
What would cause UUID to fail to load on boot?
Last edited by squaresurf (2013-07-18 19:33:37)I should have mentioned that when booted from my usb stick I did the following:
mount /dev/sda2 /mnt
arch-chroot /mnt
mkinitcpio -p linux
However I received the following error. I wan't sure if I was doing it wrong so I gave up on that venture.
preset not found /etc/mkinitcpio.d/linux.preset'
Last edited by squaresurf (2013-07-18 18:44:25) -
Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?
See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help. -
googlegroups and twitch.tv won't load properly (no content displayed) cleared cookies/cache, nodnsprefetch=true, made sure no proxy, safemode, didn't help!
The rough page layout works fine, but the actual tv-content (twitch) or the actual message texts (ggroups) won't show up. Also, clicking on the prefernces wheel in ggroups will display a small, empty box instead of a drop down menu filled with stuff.
The pages all work properly in chromium.
Note that youtube and normal google search, freemail provider pages, news pages and basically all other pages i can think of work normally and 100%!
I'm using linux 64bit, firefox 22. This problem however, is not new, it happened with older ff versions too. I'm just tired of firing up chromium each time, so i decided to report it here to get a solution.Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Whenever I try to log in to my Gmail account, the page redirects for a loooong time, then says that it won't load properly, and that the problem may be caused by not enabling cookies, but I have them enabled. Any idea what the problem might really be?
I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?
-
Hi
After just fixing my wifi problem (http://discussions.apple.com/thread.jspa?threadID=1345209) I am able to access the internet but I have a problems loading pages from some websites. The browser will say that I have loaded the page fully, but none of the flash, javascript, or backgrounds will load. Some pictures, but not most of them would load. The page is a white background with text and links and a couple small pictures. The text is a default font and only the links are a color other than black. Most sites will work, but a few big one's won't.
Some sites that won't work:
youtube.com (This wasn't working and then it worked for about three days and now it's not working again. It worked on all of the other computers in the house, mac or windows.)
facebook.com (This won't load on any of the mac computers in the house, but will work on our windows laptop.)
flickr.com
Sites that do work:
Google.com
apple.com
pretty much anything else.
This problem persists on both Firefox and Safari. I have tried restarting the computer, deleting the preference (.plist) files for both browsers, checking my firewall settings, and nothing has worked.
Does someone know what is wrong?
CameronI still haven't resolved this problem. Here is some more information...
youtube is the only website that has started working, but it sometimes stops working again.
There are many other sites that don't work, cnn.com, washingtonpost.com (sometimes), and a lot of others.
I have contacted our internet service provider and they said that they had nothing to do with the problem.
Some websites will not work at all. Safari tells me that it can't find the server. Some that do this are ups.com, computerworld.com, and others.
I think that the problem is that, for some reason, our mac computers can't access certain servers where we are. (We are at a small ski resort (on the mountain) in Canada.) I think this because when a site doesn't load properly there are several errors and they are all "can't find host" errors from a couple of the same sites (ex. example.something.something).
*Also, I ran a test on speedtest.net on the laptop and one of our iMacs and the results were way faster than anything actually loads/downloads or than the activity monitor shows, even when checking the activity monitor at the same time as running the test. -
Site won't load properly in IE
I've created a site that works perfectly in Firefox and
Safari, but not in IE. I'm not sure why, but some of the pages
aren't downloading properly (some won't load at all). I used
Dreamweaver to create a drop down menu, but don't know if that
would cause the problem.
I'd be grateful if anybody could help. The site is at
http://www.lucyohara.talktalk.net/test/
ThanksLooks fine here in IE6. You may want to compress your images
better as the
page is quite heavy:
http://www.websiteoptimization.com/services/analyze/wso.php?url=http://www.lucyohara.talkt alk.net/test/test.html
Walt
"Lucy4" <[email protected]> wrote in message
news:frdu86$c2$[email protected]..
>I did that for this page:
http://www.lucyohara.talktalk.net/test/test.html
>but it's still not working in IE6 -
Started after last auto update several days ago. A few other sites are slow to load while many are good but Facebook just won't present it's usual mix of pre-programmed scripts and links but comes up eventually as part HTML script with a log-in box and when you log-in it then takes forever again and just gives HTML type script for "Friends" "messages" etc. but if you click these it goes nowhere!
Also it won't let me clear history at all despite many tries. I removed and reloaded the program last night but no positive effect.I still haven't resolved this problem. Here is some more information...
youtube is the only website that has started working, but it sometimes stops working again.
There are many other sites that don't work, cnn.com, washingtonpost.com (sometimes), and a lot of others.
I have contacted our internet service provider and they said that they had nothing to do with the problem.
Some websites will not work at all. Safari tells me that it can't find the server. Some that do this are ups.com, computerworld.com, and others.
I think that the problem is that, for some reason, our mac computers can't access certain servers where we are. (We are at a small ski resort (on the mountain) in Canada.) I think this because when a site doesn't load properly there are several errors and they are all "can't find host" errors from a couple of the same sites (ex. example.something.something).
*Also, I ran a test on speedtest.net on the laptop and one of our iMacs and the results were way faster than anything actually loads/downloads or than the activity monitor shows, even when checking the activity monitor at the same time as running the test. -
Windows 7 won't load properly / possible HDD failure?
Well I will start off by saying I've been having problems with this since I've bought it. It used to be under warranty and I had to ship it back twice, and I've had to do countless system recoveries but this time I'm at a loss. My current problem started about 4 days ago. I had skype downloaded, and my skype started freezing randomly, but only for 30 seconds to a minute, and then come right back to working. Then this started happening more frequently, and then it got to the point to where it wasn't just skype that would freeze, it was my computer. It must have only been explorer.exe that was freezing or something because my mouse still moved, and if I was in a skype call the skype call would work but I couldnt type or click on skype without it saying that it wasn't responding. Then yesterday that problem upgraded again to nothing working very well. My computer (again I can only assume it was explorer or something) would start up normally, and then once I got to my desktop the load light would come on my tower and freeze / slow down anything and everything. Example was I had VLC media player open watching a show and the video would freeze for 2 to 5 minutes, play for 10 seconds, then freeze again. Beforehand it was only slight lock ups, but then it became full blown lockups. Once that load light came on it stayed on and never wavered and I would be forced to restart my computer to even give it a chance to run properly for a few minutes before this same problem would occur. Yesterday however the problem upgraded once again, and my computer wouldn't even let me get to my desktop normally. I was able to load into safemode with networking to try some solutions but nothing worked. Then the hangup issue started occuring in safe mode as well, forcing me to restart again. This is where it just keeps getting worse sadly. My computer would get to the "Starting Windows" screen, sit there for a couple minutes, then maybe 1 out of 10 attempts it would get to the "Welcome" screen as if it was trying to load my desktop but never would load it, and on the other 9 attempts I didn't make it to the "Welcome" screen it just sat a black screen with the load light going and it would never do anything. My mouse has never been frozen at any point so it's not a full on freeze situation, but something isn't right. I did a sytem recovery last night, put it back once again to factory settings and it still locked up a little but nothing compared to how it had been. I turned my pc off and went to sleep, and then this morning it did the usual not getting past the "starting windows" screen. Sometimes it wouldn't even recognize my hard drive, giving me the old "insert media and boot from disc" or "No media found", I also got two errors, PXE-E61: Media test failure, check cable, and the other message was PXE-MOF: Exiting PXE ROM. Then after receiving those messages my computer would restart and give me the choice to hit a button to load from disk. Throught the course of this problem I tried startup repairs, smart tests, anti viruses, nothing did anything to help. So I decided once again it was going to be time for a system recovery, but now when I hit f11 to go into the system recovery options, all of it is blacked out. I can't even click on system recovery anymore. So at this point Windows 7 won't load at all, not even in safe mode, and I'm lucky to even be given the OPTION to start it in safe mode. Half of the time it seems my computer doesnt even recognize my harddrive, and I can't even do a system recovery or repair tools, but the repair tools didn't really do anything anyway. So I have no way to use that computer, and Im thinking it might be HDD failure but I'm not hearing any noises coming from it and my computer has always been a little slow so it's not like things have slowed down by a lot so I'm not so sure its my HDD but I have no idea what to do or where to start since I've exhausted all my of resources on trying to fix this issue myself. I know this problem is probably way too vague to try to get an accurate idea of what is wrong, but I will check back now and then and answer any questions to the best of my ability (I'm not tech savy so if you need really fancy PC information you wil most likely need to tell me how to acquire said information). I mean I guess if I have to I will get a new HDD, but that means I will most likely need to get a new OS, and I love windows 7 with all my heart and I don't want to upgrade at windows 8. I feel like it's my OS but it could very well be anything at this point.
Hi @rhhox ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP -
Skype won't load properly and won't let login eith...
Hi there.
I recently installed Skype 6.21, however it is not loading properly. And it wont let me login in either. I tried uninstalling and reintsalling but still the same. Any idea what is wrong? Below is a screenshot of it
Solved!
Go to Solution.circeann1 wrote:
Since the last Skype upgrades the blue screen just keeps circling and doesn't invite me to enter my ID and Password. I am not competent to change my Skype details. Can I call somebody to help?
Reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder. -
[SOLVED] sshd.service won't wait for interface/netcfg at boot
Problem summary:
I have a home server that is configured with a static ip configured using netcfg and ifplugd. In the 'unit' section of sshd.service file I have 'After=sys-subsystem-net-devices-eno1.device' meant to let the service wait before the device is up. Ever since upgrading to systemd however at boot the sshd.service enters failed state. Only after manually issuing 'systemctl start sshd.service' the service will run and I can connect to it from another machine. I tried adding 'net-auto-wired.service' to the 'After' line but the result is the same.
/etc/conf.d/netcfg:
NETWORKS=(myethernet)
WIRED_INTERFACE="eno1"
/etc/network.d/myethernet:
CONNECTION="ethernet"
DESCRIPTION="A basic static ethernet connection using iproute"
INTERFACE="eno1"
IP="static"
ADDR="192.168.1.5"
GATEWAY="192.168.1.254"
DNS=("83.98.255.11")
/etc/systemd/system/sshd.service:
[Unit]
Description=OpenSSH Daemon
Wants=sshdgenkeys.service
#After=net-auto-wired.service sys-subsystem-net-devices-eno1.device
After=sys-subsystem-net-devices-eno1.device
[Service]
ExecStart=/usr/sbin/sshd -D
ExecReload=/bin/kill -HUP $MAINPID
KillMode=process
Restart=always
[Install]
WantedBy=multi-user.target
output of 'systemctl status sshd.service' after boot:
sshd.service - OpenSSH Daemon
Loaded: loaded (/etc/systemd/system/sshd.service; enabled)
Active: failed (Result: start-limit) since Sat 2013-03-09 22:09:38 CET; 3min 28s ago
Process: 405 ExecStart=/usr/sbin/sshd -D (code=exited, status=255)
Mar 09 22:09:38 arch-server systemd[1]: Unit sshd.service entered failed state
Mar 09 22:09:38 arch-server systemd[1]: sshd.service holdoff time over, scheduling restart.
Mar 09 22:09:38 arch-server systemd[1]: Stopping OpenSSH Daemon...
Mar 09 22:09:38 arch-server systemd[1]: Starting OpenSSH Daemon...
Mar 09 22:09:38 arch-server systemd[1]: sshd.service start request repeated too quickly, refusing to start.
Mar 09 22:09:38 arch-server systemd[1]: Failed to start OpenSSH Daemon.
Mar 09 22:09:38 arch-server systemd[1]: Unit sshd.service entered failed state
output of 'journalctl -b | grep sshd'
Mar 09 22:09:36 arch-server sshd[342]: Set /proc/self/oom_score_adj from 0 to -1000
Mar 09 22:09:36 arch-server sshd[342]: error: Bind to port 22 on 192.168.1.5 failed: Cannot assign requested address.
Mar 09 22:09:36 arch-server sshd[342]: fatal: Cannot bind any address.
Mar 09 22:09:36 arch-server systemd[1]: sshd.service: main process exited, code=exited, status=255/n/a
Mar 09 22:09:36 arch-server systemd[1]: Unit sshd.service entered failed state
Mar 09 22:09:36 arch-server systemd[1]: sshd.service holdoff time over, scheduling restart.
Mar 09 22:09:36 arch-server sshd[384]: Set /proc/self/oom_score_adj from 0 to -1000
Mar 09 22:09:36 arch-server sshd[384]: error: Bind to port 22 on 192.168.1.5 failed: Cannot assign requested address.
Mar 09 22:09:36 arch-server sshd[384]: fatal: Cannot bind any address.
Mar 09 22:09:36 arch-server systemd[1]: sshd.service: main process exited, code=exited, status=255/n/a
Mar 09 22:09:36 arch-server systemd[1]: Unit sshd.service entered failed state
Mar 09 22:09:36 arch-server systemd[1]: sshd.service holdoff time over, scheduling restart.
Mar 09 22:09:36 arch-server systemd[1]: sshd.service: main process exited, code=exited, status=255/n/a
Mar 09 22:09:36 arch-server sshd[390]: Set /proc/self/oom_score_adj from 0 to -1000
Mar 09 22:09:36 arch-server sshd[390]: error: Bind to port 22 on 192.168.1.5 failed: Cannot assign requested address.
Mar 09 22:09:36 arch-server sshd[390]: fatal: Cannot bind any address.
Mar 09 22:09:37 arch-server systemd[1]: Unit sshd.service entered failed state
Mar 09 22:09:37 arch-server systemd[1]: sshd.service holdoff time over, scheduling restart.
Mar 09 22:09:37 arch-server sshd[393]: Set /proc/self/oom_score_adj from 0 to -1000
Mar 09 22:09:37 arch-server sshd[393]: error: Bind to port 22 on 192.168.1.5 failed: Cannot assign requested address.
Mar 09 22:09:37 arch-server sshd[393]: fatal: Cannot bind any address.
Mar 09 22:09:37 arch-server systemd[1]: sshd.service: main process exited, code=exited, status=255/n/a
Mar 09 22:09:37 arch-server systemd[1]: Unit sshd.service entered failed state
Mar 09 22:09:37 arch-server systemd[1]: sshd.service holdoff time over, scheduling restart.
Mar 09 22:09:37 arch-server sshd[395]: Set /proc/self/oom_score_adj from 0 to -1000
Mar 09 22:09:37 arch-server sshd[395]: error: Bind to port 22 on 192.168.1.5 failed: Cannot assign requested address.
Mar 09 22:09:37 arch-server sshd[395]: fatal: Cannot bind any address.
Mar 09 22:09:37 arch-server systemd[1]: sshd.service: main process exited, code=exited, status=255/n/a
Mar 09 22:09:37 arch-server systemd[1]: Unit sshd.service entered failed state
Mar 09 22:09:37 arch-server systemd[1]: sshd.service holdoff time over, scheduling restart.
Mar 09 22:09:37 arch-server sshd[405]: Set /proc/self/oom_score_adj from 0 to -1000
Mar 09 22:09:37 arch-server sshd[405]: error: Bind to port 22 on 192.168.1.5 failed: Cannot assign requested address.
Mar 09 22:09:37 arch-server sshd[405]: fatal: Cannot bind any address.
Mar 09 22:09:37 arch-server systemd[1]: sshd.service: main process exited, code=exited, status=255/n/a
Mar 09 22:09:38 arch-server systemd[1]: Unit sshd.service entered failed state
Mar 09 22:09:38 arch-server systemd[1]: sshd.service holdoff time over, scheduling restart.
Mar 09 22:09:38 arch-server systemd[1]: sshd.service start request repeated too quickly, refusing to start.
Mar 09 22:09:38 arch-server systemd[1]: Unit sshd.service entered failed state
Mar 09 22:13:19 arch-server sshd[597]: Set /proc/self/oom_score_adj from 0 to -1000
Mar 09 22:13:19 arch-server sshd[597]: Server listening on 192.168.1.5 port 22.
Mar 09 22:13:58 arch-server sshd[603]: Set /proc/self/oom_score_adj to 0
output of 'ip link':
eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 (...) prefixlen 64 scopeid 0x20<link>
ether (...) txqueuelen 1000 (Ethernet)
RX packets 2399 bytes 176947 (172.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 846 bytes 112345 (109.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 45 base 0x4000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
output of 'systemctl' after issuing 'systemctl start sshd.service' :
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1b.0/sound/card0
sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-net-eno1.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eno1
sys-devices-pci0000:00-0000:00:1c.1-0000:02:00.0-net-wlp2s0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlp2s0
sys-devices-pci0000:00-0000:...d5:1.0-host6-target6:0:0-6:0:0:0-block-sdc-sdc1.device loaded active plugged U3_Cruzer_Micro
sys-devices-pci0000:00-0000:...d5:1.0-host6-target6:0:0-6:0:0:0-block-sdc-sdc2.device loaded active plugged U3_Cruzer_Micro
sys-devices-pci0000:00-0000:...-1\x2d5:1.0-host6-target6:0:0-6:0:0:0-block-sdc.device loaded active plugged U3_Cruzer_Micro
sys-devices-pci0000:00-0000:00:1f.2-host2-target2:0:0-2:0:0:0-block-sda-sda1.device loaded active plugged FUJITSU_MJA2320BH_G2
sys-devices-pci0000:00-0000:00:1f.2-host2-target2:0:0-2:0:0:0-block-sda-sda2.device loaded active plugged FUJITSU_MJA2320BH_G2
sys-devices-pci0000:00-0000:00:1f.2-host2-target2:0:0-2:0:0:0-block-sda-sda3.device loaded active plugged FUJITSU_MJA2320BH_G2
sys-devices-pci0000:00-0000:00:1f.2-host2-target2:0:0-2:0:0:0-block-sda.device loaded active plugged FUJITSU_MJA2320BH_G2
sys-devices-pci0000:00-0000:00:1f.2-host4-target4:0:0-4:0:0:0-block-sdb-sdb1.device loaded active plugged FUJITSU_MJA2320BH_G2
sys-devices-pci0000:00-0000:00:1f.2-host4-target4:0:0-4:0:0:0-block-sdb.device loaded active plugged FUJITSU_MJA2320BH_G2
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-pnp0-00:03-tty-ttyS0.device loaded active plugged /sys/devices/pnp0/00:03/tty/ttyS0
sys-devices-pnp0-00:04-tty-ttyS1.device loaded active plugged /sys/devices/pnp0/00:04/tty/ttyS1
sys-devices-virtual-block-dm\x2d0.device loaded active plugged /sys/devices/virtual/block/dm-0
sys-devices-virtual-block-dm\x2d1.device loaded active plugged /sys/devices/virtual/block/dm-1
sys-devices-virtual-block-dm\x2d2.device loaded active plugged /sys/devices/virtual/block/dm-2
sys-subsystem-net-devices-eno1.device loaded active plugged /sys/subsystem/net/devices/eno1
sys-subsystem-net-devices-wlp2s0.device loaded active plugged /sys/subsystem/net/devices/wlp2s0
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
media-usbhd\x2dsdc1.mount loaded active mounted /media/usbhd-sdc1
media-usbhd\x2dsdc2.mount loaded active mounted /media/usbhd-sdc2
mnt-backup.mount loaded active mounted /mnt/backup
mnt-data.mount loaded active mounted /mnt/data
srv.mount loaded active mounted /srv
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
var.mount loaded active mounted /var
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
dbus.service loaded active running D-Bus System Message Bus
dcron.service loaded active running Periodic Command Scheduler
[email protected] loaded active running Getty on tty1
httpd.service loaded active running Apache Web Server
iptables.service loaded active exited Packet Filtering Framework
mysqld.service loaded active running MySQL database server
net-auto-wired.service loaded active running Provides automatic netcfg wired connection
ntpd.service loaded active running Network Time Service
rc-local.service loaded active exited /etc/rc.local Compatibility
rtorrent.service loaded active running rTorrent Service
sshd.service loaded active running OpenSSH Daemon
sshguard.service loaded active running Block hacking attempts
systemd-cryptsetup@luks_backup.service loaded active exited Cryptography Setup for luks_backup
systemd-cryptsetup@luks_data.service loaded active exited Cryptography Setup for luks_data
systemd-cryptsetup@luks_swap.service loaded active exited Cryptography Setup for luks_swap
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
Last edited by rwd (2013-03-10 08:32:59)WonderWoofy wrote:Does enabling the socket work? Sshd with systemd has socket activation, which is awesome.
Nice, this solves it indeed. thanks!
For anyone with the same problem it was just a matter of:
# systemctl disable sshd.service
# systemctl enable sshd.socket
see https://wiki.archlinux.org/index.php/Se … shd_daemon
Last edited by rwd (2013-03-10 09:08:43) -
I have intermittent problems with a Web site not loading properly (rather than a gray background with pictures and clickable captions linking to news stories, a page consisting only of text and hyperlinks loads). The page loads normally in Internet Explorer. The problem with Firefox seems to be limited to this one site. I've previously reported it by clicking Help | Report broken Web sites. Thanks for any suggestions
I had this problem. I fixed it by right clicking on the website page and found I had inadvertently ticked "block images from this website". Uncheck this and it's fine!
-
facebook no longer loads properly. comes up with a white page
where is the fix?
I missed the fix! -
My website won't load properly in FF but will in IE - tried solutions - didn't work
I have 2 websites (1 cloned from the other) that both worked well in FF - until about a month ago.
www.drydiapersplus.ca
(landing page now loading properly in FF - but loads properly in IE) and www.drydiapersplus.com (loads properly)
When I try & open the .ca site - the left panel, top panel and right panel open up correctly - and the top text...but none of the images load up in the bottom 1/2 of the screen in the middle.
I've tried clearing cache, I've tried CNTRL F5 (hard refresh) - and none of it works.
'''This is the .ca site that DOES NOT load correctly in FF (but does in IE)'''
<a href="http://s43.photobucket.com/albums/e361/sugerray50/?action=view&current=casite.png" target="_blank"><img src="http://i43.photobucket.com/albums/e361/sugerray50/casite.png" border="0" alt=".ca site, .ca site not loading correctly in FF"></a>
This is the US site that does load correctly in FF
<a href="http://s43.photobucket.com/albums/e361/sugerray50/?action=view&current=USsite.png" target="_blank"><img src="http://i43.photobucket.com/albums/e361/sugerray50/USsite.png" border="0" alt=".com site, .com site DOES load correctly"></a>
''edited by a moderator to fix the first two hyperlinks - Ed''Turns out, after much going back and forth (and having them read your response) - that there was an issue with the security certificate and how the images were all 'secure' images..... so - the host reinstalled the security certificate - or whatever it was they did (I'd complained about this a month ago to my web developer - and was told it was my computer - but when a customer started having the same issues - they looked into it more - and found out it was a security certificate issue).
Thank you for your help - because it was your information that got my web developer to get on the host and get it fixed. :-) -
(SOLVED)Farmville 2 won't load
Anyone on here play Farmville 2? I have tried multiple times and many different solutions, but I have yet to find out why Farmville 2 won't load. It loads halfway, then stops. I can run the game in Linux Mint, so I'm wondering if there is just some file that I'm missing to run the game. I have installed flashplayer from the repositories, as well as pepperflash from the AUR. Nothing seems to work. It doesn't work on Firefox, either. I have just done a full system upgrade, but nothing related to flashplayer or video drivers were updated. Oh, yes, I'm running the Intel video drivers on my system. I have tried running the Catalyst drivers, and EVERY time I do so, I end up with a blank screen and I have to do a reinstall to fix it. Any help would be appreciated!!!
Last edited by horsemanoffaith (2013-09-09 00:29:34)Let's see if this works!
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] (rev ff)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] (rev 34)
0b:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller (rev 02)
Woo hoo!!! I figured it out all on my own! Here you go!
Maybe you are looking for
-
I Can No Longer See Files On My External Hardrive
I'm trying to import some files from my external HD into FCP and here's what's happening: I shot some video on HDV and had to import it onto an old iMac via iMovie HD. I saved those files and the iMovie docs onto an external HD (using 314GB on a 1TB
-
Xserve RAID lost RAID 5 array on right/bottom controller
I cleanly shut down an Xserve G5 with an Xserve RAID attached and then powered off the Xserve RAID this morning. I replaced a failing memory module in the Xserve and moved the rack 6". I then powered on the Xserve RAID, waited for a couple minutes un
-
Help! Upgraded to 3.2. I receive this message, "Aperture cannot access this library."
How can I possibly make changes if Aperture doesn't launch?
-
Solaris 10 install on Virtualbox2.1.4 is 32-bit
HI, I installed Solaris 10 5/08 s10x_u5wos_10 X86 on a PC x86 (Intel Dual CPU E2180 @ 2.00GHz LGA 775) ,it is OK and is 64bit. -bash-3.00$ isainfo -v 64-bit amd64 applications cx16 mon sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu 32-bit i386 appl
-
What will make it so you can't move objects by click and drag even though they are not locked?
I have been using the cc 2014 version for awhile now and this morning when I select an object with the selection tool, I can't freely move it by click and drag. The object will move with the arrow keys and can be aligned with the alignment tools.